Docstoc

Sandvik QuickDisc Sandvik QuickDisc

Document Sample
Sandvik QuickDisc Sandvik QuickDisc Powered By Docstoc
					Product information                                                               P R O D U C T I N F O R M AT I O N F R O M
                                                                                 SANDVIK PROCESS SYSTEMS




Sandvik QuickDisc™
Sandvik QuickDisc™ 300




                                                                                              QuickDisc QuickDisc 300

                                                                                 Cutting
                                                                                 diameter      140 mm           140 mm

                                                                                               210 mm           210 mm

                                                                                                                300 mm

Sandvik QuickDisc – complete                 Sandvik QuickDisc 300 – complete




Efficient removal of                         Effective, reliable, adjustable
damaged areas in steel belts                 One main aluminium body is
and the production of repair/                equipped with suction cups and
replacement discs                            is designed to keep the steel
The Sandvik QuickDisc tool                   belt flat. The suction cups are
enables quick and easy removal               connected to compressed air,
of damaged areas in steel belts              (6 bar, 600 l/min) which creates
and the production of circular               a vacuum against the steel belt.
blanks for repair/replacement.                  A rotating centre holds
The tool has been specifically               a trepanning tool made of
designed for press belts used in             Sandvik Coromant, which is fed
the manufacture of wood based                manually during cutting out of
panels.                                      the damaged area (the centre
   Making use of a special                   unit operates pneumatically).
cutting tool, the QuickDisc                  The trepanning tool, with
produces a clean-cut hole to                 its axial cutting-off blade,
such precise tolerances that no              is adjustable for diameters
additional treatment – e.g. edge             corresponding to Sandvik
grinding – is necessary.                     clamping plates and the
   Welding can be carried out                pneumatic clamping device used
with no distortion.                          for the welding of the insert.




AB Sandvik Process Systems, Sweden, Phone +46 26 26 56 00, Fax +46 26 25 86 75
www.smt.sandvik.com/sps e-mail: info.sps@sandvik.com
                                                                                P S - S B - 4 4 2 5 E N G 0 4 . 2 0 0 3 P R I N T E D I N S W E D E N B Y S A N DV I K E N S T RY C K E R I A B. P RO D U C T I O N : O R D & F O R M I U P P S A L A A B.
  The QuickDisc is also used for        should always be made from a
the manufacture of the circular         material of identical thickness
blanks used to replace the cut          and steel grade as the steel belt
out damaged area. Ideally,              to be repaired.
the circular blank should                  The welding operation, which
be produced beforehand to               is carried out by hand, should
minimise production downtime.           be made clockwise and from
The circular replacement blank          both sides of the steel belt.

 Specifications:                         Specifications:
 Sandvik QuickDisc - complete            Sandvik QuickDisc 300 - complete

 All parts are packed in an aluminium    All parts are packed in an aluminium
 box, 560 x 560 x 360 mm (LxWxH).        box, 760 x 740 x 380 mm (LxWxH).

 Total weight approx. 42 kg              Total weight approx. 58 kg

 Ordering code: S00184                   Ordering code: S00222




                                                www.smt.sandvik.com/sps

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:14
posted:10/18/2011
language:English
pages:2