Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

105

VIEWS: 6 PAGES: 1

  • pg 1
									FSC 9310                                                                                                                                     JCP Q80
                                                             HIGH-FINISH RED WALLET BOARD
Cardboard                                                                                                                             February 1, 1999

Use information: This paragraph is informational only and is not exclusively definitive of the end use.
    For face and back letterpress printing of file folders, expansion wallets, and loose-leaf or cloth-stripped covers for composition books.
Printed matter may include text and line illustrations.

Stock: Principally chemical pulp; the remainder free from                                 Writing quality: Characters written with ball point and felt tip
  groundwood pulp.                                                                          pens shall be clear cut and free from excessive feathering.
    Note: Not less than 20 pct postconsumer fiber. Any percent over                       General appearance: The color, finish, and cleanliness shall con-
  20 percentage points, is encouraged, provided that the require-                           form to the standard sample(s) adopted by the Government.
  ments of this Standard are met.
                                                                                            Color: The paper board in the order (or publication) shall be
Grammage (g/m 2) ..............................................................     260     uniform. The color variation shall not exceed DE(CIELAB)=1.0.
 Basis weight: 24 by 36 inches, 500 sheets (pounds) ......                          160     Board shall match the commercial standard for red or as speci-
 A tolerance of ±5 pct shall be allowed.                                                    fied. Colors shall not fade.
Bursting strength: Average, not less than (kPa) ...........                         790   Sampling and testing: Shall be conducted in accordance with
 Equivalent (lb/in 2) ...........................................................   115     standards in Part 2, Government Paper Specification Standards.

Unless otherwise specified, the following is automatically waived when printing or duplicating is to be accomplished on commercial contract

Curl: Paper board shall lie flat with either no tendency to curl or                         Paper board with the long dimension 813 mm (32 inches) or less
  with a curl which can be overcome under reasonable working                                shall be considered square if the variation does not exceed 1 mm
  conditions.                                                                               (1⁄32 inch); over 813 mm (32 inches), 2 mm (1⁄16 inch).
Size and trim: Paper board shall be furnished in the size(s) or-                          Grain: Direction of the grain on flat board shall be as ordered.
  dered and shall be flat, trimmed square on four sides with clean
  smooth edges, and evenly jogged. A tolerance of ±2 mm (1⁄16                             Pressroom conditions: The bulk of this paper board will be used
  inch) shall be allowed. Successive sheets within any package                             in air-conditioned pressrooms maintained at 24 °C ±2 °C and
  shall not differ from each other by more than 0.5 mm (1⁄64 inch).                        45 pct ±8 pct relative humidity.




                                                                                                                                                             105

								
To top