connections by nuhman10

VIEWS: 7 PAGES: 2

									To test these configurations you will need to edit the Aworld.ini file.
First you will have to right click on the file and in PROPERTIES change the file out of
READ ONLY. Then do the edit, save the file and make the file read only again. Then test it.


Usual firewall edit.
Where host= is the proxy server's hostname or IP address, and port= is the proxy server's
port. Optionally proxy_auto_detect=1 can be used, to retrieve the proxy settings from
Internet Explorer, if IE has proxy settings defined.

[connection]
type=-1
host=proxy.blahblahblah (WHATEVER your proxy is )
port=8080
proxy_auto_detect=0
tunnel_host=atlantis.activeworlds.com
tunnel_port=443

OR

[connection]
type=2
tunnel_host=atlantis.activeworlds.com
tunnel_port=443
host=my.proxy.edu
port=80
proxy_auto_detect=0




NSW DET settings

[connection]
type=-1
host=proxy.det.nsw.edu.au
port=8080
proxy_auto_detect=0
tunnel_host=atlantis.activeworlds.com
tunnel_port=443
proxy_use_password=1
proxy_login=quest.atlantis
proxy_password=a3be9c93601bfa4f0066
QLD MOE settings

[connection]
type=2
tunnel_host=atlantis.activeworlds.com
tunnel_port=443
proxy_use_password=1
proxy_auto_detect=0
host=proxy.burpengarymeadowsss.eq.edu.au
proxy_login=
proxy_password=
port=80


Connection through an authentication system.

[connection]
type=4
tunnel_host=atlantis.activeworlds.com
tunnel_port=443
host=PROXY_SERVER_HOST_NAME
port=PROXY_SERVER_PORT#
proxy_login=USERNAME
proxy_password=PASSWORD
proxy_use_password=1

Replace the upper-case-letter names by the school's individual settings. Note, the proxy
server must allow connections to atlantis.activeworlds.com port 443, if no other tunnel host
and port is provided like in this example

								
To top