Docstoc

List of Research Papers Published _ Communicaed

Document Sample
List of Research Papers Published _ Communicaed Powered By Docstoc
					                         MAE Department , MAIT
              List of Research Papers Published / Communicated

Prof. O.P. Grover
Dean (Academics)
Publications in International Journals:

   1. Juneja BL, Grover OP, “Analysis of Forging of Splines”; Journal of Engineering
      Production; vol. iv no.1; March 81.

   2. Goswami R.K. Dhar Ajay, Gupta A.K., Grover O.P. “Extrusion Characteristics of
      Al Alloy/Si Cp Metal Matrix Composite” J. of Material Sc. & Tech. 2001.

   3. Goswami R.K. Dhar Ajay, Gupta A.K., Grover O.P. “Effect of Deformation and
      Ceramic reinforcement on work Hardening Behaviour of Hot Extension of 2124
      Al, Si Cp Metal Matrix Composites” J. of Materials No. 13p 1160-1172 – 1999.

Publication in National Journals:

   1. Chakraborty JM and Grover OP, “Computer Aided Design of Wilson Automotive
      Epicylic Transmission.” Journal of Institution of Engineers (India); vol 54 pt.
      ME4 March 74.

   2. Grover OP; “Design of Low Cost Gear Cutting Machine” Journal of Institution of
      Engineers (India); vol. 56 pt. ME3; Nov 75.

   3.     Sachdeva AS, Grover OP, Arora RL “Automatic Speed Limitations of
         Automobiles”; Journal of Institution of Engineers (India); vol. 56; pt. ME3;
         Nov. 75.

   4. Grover OP, Reddy BP, “An Over Drive for Automobiles”; Journal of Institution
      of Engineers (India); vol 57; pt. ME 6; May 77.

   5. Ballaney PL, Grover OP, Kapoor RP, “Air Conditioning of Fiat Car from Waste
      Heat Energy”; Journal of Institution of Engineers (India); vol. 57; pt. ME 6; May
      77.

Publication in International Conferences:

    1. Grover OP, Kumar KL, “Wind Mills”; Proc. Of International Solar Energy
       Congress 77; Jan. 78; Delhi.

   2. Grover OP, Sastry YVSR, Ballaney PL, “A Reciprocating Device using Solar
      Energy”; Proc. of Int. Solar Energy Congress 77; Jan 78, Delhi.

   3. Grover OP, Juneja BL, “Analysis of Forging of Gear-like Elements; Proc. Of First
      Int. Conf. on Technology of Plasticity; Sept. 84; Tokyo, Japan.
   4. Grover OP, Prashad SS, “Metal Flow Studies and Analysis of T-shaped
      Components”; Third Int. Conf. on Technology of Plasticity; Kyoto, Japan; 1990.


Publication in National Conferences:

   1. Rajnish Prakash, Grover OP, “Improvement in the productivity of Small and
      Cottage Industries through Ergonomic Design”; proc. Of Conf. on Mech. Engg. &
      Workshop on rural Development; ISME: Dec.77

   2. Grover OP & Juneja BL, “Analysis of Forging of gears”; Proc. Of Conf. on Mech.
      Engg. & Workshop on Rural Dev.; ISME; Dec.77

   3. Grover OP, Juneja BL, “Analysis of Forging of Milling Cutters and Like
      Elements”, sixth ISME Conf. on Mech. Engg.; 1985.

   4. Mahna VK, Grover OP, “Thermal Design and Analysis of Heat Pipe”; sixth ISME
      Conf. on Mech. Engg.; 1985.

   5. Kalra JS, Grover OP, “A New Design of Muffler for an Automobile”, sixth ISME
      Conf. on Mech. Engg.:1985.

   6. Sethi VK, Grover OP, “Metal Flow in Forging of Spur Gears of Finer Modules”;
      sixth ISME Conf. on Mech. Engg.; 1985.

   7. Batra BR, Grover OP, “Metal Flow Studies and analysis of Forging of
      Serrations”; Proc. Of 12 AIMTDR Conf. Dec. 1986.

   8. Gupta AK, Sikand R, Togra OP, Anadani RC, Bindal MM, Grover OP,”
      Significance of Cold Forging Process to Automobile Industry”; Proc. Of 4th
      National Seminar on quality, Reliability and Maintainability of Forging; Madras;
      1987.

   9. Arora BD, Grover OP, “Flow Studies and Analysis of Opposed Piercing-Forging
      of Gear Blanks”; National Conf. on Forging 1989.

   10. Grover OP, “Tribology in Cold Forging”; National Programme on Tribology;
       Industria Problems and Prospects; 1992: Delhi.

   11. Grover OP, Organisation of Teaching in Engineering Institutes” “All India
       Seminar on Sustaining Quality in Technical Education in India and
       Environmental issues in Engineering Curricula-challenges Ahead”, The Institute
       of Engineers(India) May 2007.

   12. Grover OP, Technical Education –A Review “Sustaining Quality in Technical
       Education in India-Challenges Ahead”. The Institution of Engineers (India) July
       2008.
Prof V.K.Jain
Publications in International Journals:

1. Computer aided design and analysis of an Aqua Ammonia Vapor absorption
   refrigeration System, International Jr. of Mechanical Engineering Education, Vol. 5,
   No. 4, pp 357-370, 1977

2. Experimental Studies on boiling of mixtures of R12 and R13, Seventh Biannual
   National Symposium on Refrigeration and Airconditioning, Dec 22-23, 1980, Indian
   Institute of Technology, Kharagpur – 721302, INDIA.

3. On evaluation of correlations for prediction of heat transfer coefficient in nucleate
   boiling, International Jr. of Heat & Mass Transfer, Vol 25, No 8, pp. 1250-1251,
   1982.

4. Statistical evaluation of existing correlations for prediction of pressure gradients in
   flow boiling of refrigerants inside horizontal tubes, XVIth International Congress of
   Refrigeration, August 31- Sept. 9, 1983, Paris, France.

5. On evaluation of heat transfer coefficient in flow boiling of refrigerants inside
   horizontal tube, XVIth International Congress of Refrigeration, August 31- Sept. 9,
   1983, Paris, France.
6. Studies on flow boiling of mixtures of refrigerants R12 and R13 inside a horizontal
   tube, XVIth International Congress of Refrigeration, August 31- Sept. 9, 1983, Paris,
   France.

Prof. A.K. Tayal

Publication in International Journals:
   1. A.K. Tayal and R. Natarajan, “Metal flow in axisymmetric extrusion – A
      comparative study of numerical solutions”, Journal of Engineering Production, 3,
      125-134 (1979)

   2. A.K. Tayal and R. Natarajan, “Numerical simulation of friction and lubrication
      in extrusion process”, in, Laerge Deformation: Proceedings of the symposium in
      Memory opf Professor B. Karunes, Edited by N.K. Gupta and S. Sen Gupta, pp
      293-301, South Asian Pub. Pvt. Ltyd., New Delhi (1982)

   3. A.K. Tayal and R. Natarajan, “Extrusion of rate sensitive materials using a
      viscoplastic constitutive equation and finite element method”, International
      Journal of Mechanical Sciences, 23, 89-98 (1981)

   4. A.K. Tayal and R. Natarajan, “A Finite element analysis of axisymmetric
      extrusion of composite rods”, International Journal of Machine Tool Design and
      Research, 21, No.3/4, 227-237 (1981).
   5. A.K. Tayal, “Analysis of combined backward forward extrusion by the finite
      element method”, Journal of Engineering Production Vol.6, 92-99 (1983).

Publication in National Journal:
   1. A.K. Tayal and R. Natarajan, “ Plane strain extrusion studies by finite element
      method”, Journal of the Institution of Engineers (India), Vol.63, Part ME 1, 33-37
      (1982).

Publication in International Conference:
   1. A.K. Tayal and R. Natarajan, “Analysis of combined backward-forward extrusion
      by the finite element method”, International Conference on Numerical Methods in
      Industrial Forming Processes, held by The Institute for Numerical Methods in
      Engineering at University College of Swansea, U.K., 12-16 July, 1982.

   2. Chattopadhyay, R. Prakash and A.K. Tayal, “Combined backward forward
      extrusion: Theoretical and experimental study”, Proc. XI AIMTDR Conference,
      IIT Madras (1984).

Publication in National Conference:

  1.   A.K. Tayal, “A simple experimental set up for photoelastic holography”,
       Proceedings of Conference on Mechanical Engineering and Workshop on Rural
       Development, Delhi (1977).

   2. A.K. Tayal and R. Natarajan, “ A study of exisymmetric extrusion by finite
      element method”, Seminar on Finite Element Analysis, Department of Civil
      Engineering, Instt. of Technology, B.H.U., Varanasi (1979)

   3. A.K. Tayal, “Changing Trends in Technology: Its Implications for Technical
      Education & Human Values”, Proceedings of National Programme on Emerging
      Trends in Technical Education, Delhi (1992).

Prof. K.L. Arora

Publication in National Journals:

1. Arora K.L., Sachdev A.S and Sekhon G.S - “Dynamic Effects in Plane Strain
   Forging” – Journal of Institution of Engineers (India) May, 1979, Vol..59, pp 292-299

Publication in International Conference:

1. Arora K.L., Sachdev A.S and Sekhon G.S. – "Effect of Inertia Forces in Strip
   Forging” – Proc. 1st. I.S.M.E. Conference on Mechanical Engineering & Workshop
   on Rural Development, Delhi. December, 1977, pp PB-1 to PB-27

2. Arora K.L., Sekhon G.S and Shishodia K.S.- “Mechnics of the Axisymmetric Cold
   Heading Process” – Ptroc. 12th AIMTDR Conference, Delhi, December, 1986, pp
   406-409.
3. Sekhon G.S., Arora K.L. and Shishodia K.S. - “Application of Finite Differences and
   Finite Element Methods to the Axisymmetric Cold Heading Process” – Proc. Int.
   Conf. on Computational Plasticity, Borcelona, Spain, April 1987, pp 1061-1072

4. Sekhon G.S., Shishodia K.S. and Arora K.L - “A Finite Element Formulation for
   CAD of Cold Forming Processes” – Seminar on Finite Element Applications for
   Practical Problems and ASKA Users‟ Conference NAL/ISAC, Bangalore, India,
   January 1988, pp VI.1.1-VI.1.10.

5. Sekhon G.S., Arora K.L and Shishodia K.S - “Role of Aspect Ratio in the Heading
   Process” – Proc. 13th AIMTDR Conf. Jadavpur University, Nov. 1988, pp E.42-E.46.

6. Arora K.L., Sekhon G.S. and Shishodia K.S “Analysis of the Cold Heading Process
   using Finite Element and Flow Formulation” – Proc. 4th Int. Conf. on CAD, CAM,
   Robotics and Factories of the Future, New Delhi, December, 1989, pp 120-124.

Publication in National Conference:

1. Sekhon G.S., Shishodia K.S. and Arora K.L. - “Finite Element Analysis of the
   Heading Process” – Proc. National Convention of Mechanical Engineers,
   Hyderababd, 1986, pp. 2.79 – 2.89.

Dr. Aman Aggarwal
Publications in International Journals
1.    Aman Aggarwal, Hari Singh, Pradeep Kumar, Manmohan Singh. Modeling of
     Machining Parameters and Cooling Conditions in Hard Turning of AISI P-20 Tool
     Steel using Response Surface Methodology and Desirability Graphs. International
     Journal of Machining and Machinability of Material (A journal of Inderscience).Vol
     4, No 1, 2008, pp 95-110.

2. Aman Aggarwal, Hari Singh, Pradeep Kumar, Manmohan Singh. Optimization of
   Multiple     Quality Characteristic for CNC turning under Cryogenic cutting
   environment using Desirability function. Journal of Material Processing Technology
   (a journal of Elsevier). Vol 205,2008, pp 42-50.

3. Aman Aggarwal, Hari Singh, Pradeep Kumar, Manmohan Singh. Optimizing Power
    Consumption for CNC machined parts using Response Surface Methodology and
    Taguchi Technique- a comparative analysis. Journal of Material Processing
    Technology (a journal of Elsevier) Vol. 200(1-3), May 2008,pp.373-384.

4. Aman Aggarwal, Hari Singh, Pradeep Kumar, Manmohan Singh. Multi Characteristic
    Optimization of CNC turned parts using principal component analysis. International
    Journal of Machining and Machinability of Material (a journal of Inderscience). Vol.
    3(1/2), 2008, pp 208-223.
5. Aman Aggarwal, Hari Singh, Pradeep Kumar, Manmohan Singh. Simultaneous
   Optimization of conflicting responses for CNC turned parts using Desirability
   function. International Journal of Material and Product technology(a journal of
   Inderscience). vol 18 No.3,2009.



Publications in National Journals

1.    Aman Aggarwal and Hari Singh, “Optimization of machining techniques- A
     retrospective and literature review”, Sadhana (A Journal of Indian Academy of
     Sciences, Bangalore), Vol. 30(6), December 2005, pp. 699-711.

2. Aman Aggarwal, Hari Singh, Pradeep Kumar and Manmohan Singh, “Cutting force
    optimization for CNC machined P-20 tool steel through Taguchi‟s parameter design
    approach”, Productivity Promotion (A journal of DPC, New Delhi) ,Vol.10(36), May-
    Aug,2007,pp.22-31.


International Conference

1. Aman Aggarwal , Hari Singh, Pradeep Kumar, Manmohan Singh “Effect of various
   independent factors on Surface Roughness and Cutting Forces in CNC machining of P-20
   steel- An Experimental Study” Presented in DCE, page 526-532, 12-14 Dec,2005.

Aman Aggarwal , Hari Singh, Pradeep Kumar, Manmohan Singh “Application Of DOE Method
  In the Optimization of Tangential Cutting Forces in CNC Machining”. Accepted at
  Coimbatore Institute of Tech, Coimbatore, e-copy. (27-28 July,2006).

3. Kamal jangra ,Sandeep Groover, Aman Aggarwal.” Graph theoretic approach to
     evaluate the effect of various factors on die performance” accepted for conference at
     NIT ,Surat from 4th to 6th Jan 2010.

4. Kamal jangra ,Sandeep Groover, Aman Aggarwal. “Optimization of multi machining
   characterisitics in die cutting with WEDM using Grey Relation Analysis” accepted
   for conference at NIT ,Surat from 4th to 6th Jan 2010.


National Conference

1. Aman Aggarwal , Hari Singh “Robust design methods of Quality Optimization- A Literature
   Survey”Presented in NIT, Kurkshetra , page 28-34.(13-15 March, 2005)

2. Aman Aggarwal , Hari Singh, Pradeep Kumar, Manmohan Singh “Power Consumption
   Optimization of CNC Machined Parts using Taguchi Technique”
   Accepted for conference at Bhatinda (12-14 Oct-2006)

Seminar,Workshops, Conferences Attended:

1. CNC Programming. NSIT,Delhi. 14-19 July,2003-One Week.
2. Orientation program for faculty members of engineering and technology
    institutions.DCE,Delhi.16-17 September,2003-2 days.
3. Fuzzy Logic and Neural Networks in Identification and control of non linear
    systems.NSIT,Delhi.29th Dec,2003-9th Jan,2004-Two Week
4. Melt treatment in foundaries. NIT, Hamirpur. 14-18 June,2004- One Week.
5. Advances in Tribology and Maintenance.IIT,Delhi.5-9July,2004-One Week.
6. Effective teaching and research with enhanced professional skills. IIT, Roorkee 23-
    27 May,2005-One Week.
7. Mathematical Modeling of Real Life Problems, IIT,Roorkee.04-15 July,2005-Two
Week
8. ANN and its Application. NITTR, Chandigarh. 20-24 March,2006-One Week.
9. Intelligent Control. NIT,Kurukshetra.25-26 June,2007-One Week.


Manoj Soni
Assistant Professor
Publications in International Journals:
1. A CAD based dynamic Analysis Approach to an Above Knee prosthesis design,
   (Under Review in International Journal – Vibro Engineering).
2. Modeling and Above Knee Prosthesis – A kinematics Approach, (Communicated on
   05- December 2009 to The International Journal “ Mechanics based Design of
   Structures and Machines”).

Publications in National Journals:
   1. F.E. Analysis To Use Mild Steel For A Tape Slit Die & Extrude Bio-Degradable
      Material, (Published in - The Institution of Engineers, Calcutta, India., November
      2006.)

Publications in National Conference:
   1. Intelligent Identification of position during Gait Cycle, (Presented in AICTE
      approved National level seminar on Soft Computing techniques, held at Maharaja
      Agrasen Institute of Technology, Delhi, India.)

Workshops/ seminars Coordinated & Organized at MAIT:
   1. Organized a seminar on Applications in Pro Engineer Wild fire 5, in collaboration
      with Adroitec Information Systems ( p) Ltd. On 04 November 2009.
   2. Organized a seminar on Technopreneur Promotion program and product life cycle
      Management in collaboration with JJATE Science and Technology Entrepreneurs
      Park on 01 October, 2009.
   3. Coordinated a 60 hours workshop on soft skills for students of MAIT, from 20
      February 2009 - 15 April 2009.
   4. Organized a three day workshop on Personality Development through mediation
      in collaboration with Divya Jyoti Jagrati Sansthan from 21 May 2008 - 23 May
      2008.
   5. Organized a four (4) day workshop on Stress Management through meditation in
      collaboration with DIvya Jyoti Jagrati Sansthan from 16-January 2008 – 19
      January 2008.
   6. Worked as a member of organizing committee for the Faculty development
      Program on Soft Computing Techniques, from December 11 to 20, 2007.
   7. Worked as a member of organizing committee for National level seminar
      on soft computing techniques, on 21 December, 2007.
   8. Organized a four (4) day workshop on Stress Management through meditation in
      collaboration with DIvya Jyoti Jagrati Sansthan from 14-April 2007 – 16 April
      2007.
   9. Organized a 3 - Day Faculty Training Workshop (12- 05-2004 to 14-05-2004) On:
      " Ladder Designing For PLC Applications & PRO-Engineer Software
      Applications For Manufacturing And Structural Analysis." For faculty of MAIT
      and private colleges affiliated to IP University.

Seminars, workshops, Conferences attended:

   1. Soft computing techniques, sponsored by AICTE – GGSIP University; Maharaja
      Agrasen Institute of Technology, Delhi; December 21st, 2007.
   2. Modeling and simulation of Mechatronic systems; Indian Institute of Technology
      – Roorkee (Roorkee, Uttaranchal); 18-06-2007 to 22-06-2007 (one week)
   3. Scientific Validation and Technical Evaluation of Ancient Medical Systems;
      Indian Institute of Technology - Delhi; February 10 - 11, 2006.
   4. Energy, Communication, & Computer systems; Maharaja Agrasen Institute of
      Technology; Delhi; Feb 2-4, 2006.
   5. Trainingon programming a Fanuc Controlled CNC Lathe and CNC milling
      machine, Aristo Robot, Automatic storage and retrieval system, CNC Train
      Software, Espirit Cam software and Workspace software; Company - MTAB
      Engineers Pvt. Ltd, Chennai; Duration - One week. (24-12-2004 to 30- 12 -
      2004).
   6. A short-term seminar on „ Induction- Training for Engineering Teachers‟;
      Maharaja Agrasen Institute of Technology, Rohini, Delhi-85; Duration: 2 days
      (6th to 7th May 2004 ).
   7. Seminar on Teaching Techniques and methodology; Maharaja Surajmal Institute
      of technology, Janakpuri, New Delhi-58; Duration: 1 day (17-01-2004).
   8. A short-term course on Fuzzy Logic and Neural Networks in Identification and
      control of Non- Linear Systems; Netaji Subhash Institute of Technology, Dwarka,
      New Delhi; from 29-12-2003 to 9-01-2004 (2 weeks).
   9. Training program on Implementation of ISO 9000 QMS; Consultancy
      Development Centre, India Habitat Centre, New Delhi. 14-10-98 to 15-10-98 (2
      days).


V.N. Mathur
Assistant Professor
Publication in International Conference:

1. Measurement of RSPM bounded Phenenthrene PAH in the Ambient Air at a sensitive
   site in Delhi‟ presented in ‟14th ISME International Conference on Mechanical
   Engineering in Knowedge age‟- Three day Conference organized by Delhi College
   of Engineering and ISME from December 12-14,2005
Seminars, Workshops, Conferences attended

1.   „Energy, Communication and Computer Systems‟- A three days National
      Conference organized by Maharaja Agrasen Institute of Technology (2-4, Feb
      2006)
2.   „CFD for heat transfer problems‟ – A one day seminar organized by Department of
      Mechanical Engineering at IIT Delhi.(Dec 2006)
3.   „Teaching Thermodynamics in a Generalized Manner‟ One week QIP workshop
      organized by Mechanical Engineering Department, IIT Delhi.(May 16-19, 2007)
4.   „Energy Conservation‟ short term course under Quality Improvement Program
      organized by Centre of Energy Studies, IIT Delhi (2-8 Dec 2007)
5.   „Advances in Combustion Science and Technology‟ Three days International
      Workshop organized by Department of Aerospace Engineering, IIT Kanpur (31 Dec
      07-2 Jan 2008)

 Anil Gupta
 (Asstt. Professor - MAE Deptt.)
 Publications in International Journals:
   1. Communicated a paper on “Taguchi Fuzzy Multi Output Optimization (MOO) in
       high speed CNC turning of AISI P-20 tool steel” to Expert Systems with
       Applications” – a publication of Elsevier (Sciencedirect.com) in October 2009.
   2. Communicated a paper on “A review of designing machine tools for leanness” to
       the Journal of Materials & Manufacturing Processes (a Francis &Taylor
       Publication) in Dec 2009.

Book Publications:

     1. Edited a published book on “Engineering Mechanics” by Kuldeep Singh Pal,
        Satya Prakashan Ltd., New Delhi in 2006-07.

Seminars, Workshops, Conferences attended:
     1. One day seminar / workshop on “Energy Conservation and Efficient Working of
        Power Plants” , at MAIT, Delhi, Jan 18, 2007.
     2. One week QIP on “Modelling and Simulation of Mechatronic Systems “
        conducted by department of Mechanical and Industrial Engineering at IIT
        Roorkee, 18-22 June, 2007
     3. Two day faculty development programme on ”Data Analysis and
        interpretation using SPSS” MAIMS, 30Nov-Dec 1, 2007
     4. Two weeks National Workshop on “Soft Computing Techniques” at MAIT ,
        Dec 11-20. 2007
     5. National Seminar on “Soft Computing Techniques” at MAIT, Dec 21. 2007
     6. Three day workshop on “Modeling and Simulation of Flexible Manufacturing
        system using ARENA“ Department of Mechanical and Production
        Engineering, Delhi College of Engineering, 08-10 May, 2006
     7. National Conference on “Energy, Communication and Computer systems”, at
        M.A.I.T. Delhi. Feb 2-4, 2006.
  8. Seminar / workshop on “Energy, Communication and Computer systems” at
      M.A.I.T Delhi. Feb 2 - 4, 2006.
  9. One week Short Term Course under Quality Improvement program (QIP) on
      “Recent Trends in Supply Chain Management” at Management Studies
      Department of IIT, Delhi, 06-11 June, 2005.
  10. Three day Workshop on “Ladder Designing for PLC Applications & ProE
      Software applications for Manufacturing and Structural Analysis” at MAIT,
      12-14 May, 2004.
  11. Seminar on “Teaching Techniques and Methodology”, at M.S.I.T. Delhi. Jan.17,
      2004.
      Seminar on “Induction Training for Engineering Teachers”, MAIT. . May 6-7,
      2004.
  12. Two weeks Short-Term Training Program (STTP) on “Advanced
      Manufacturing Systems” Sponsored by AICTE-ISTE, At NIT Kurukshetra,
      14-26 July, 2003.


Ravinder Kumar
(Sr. Lecturer - MAE Deptt.)

 Publication in International Conference:
  1. Paper titled “vendor management inventory (VMI)” in International Conference
     organized by BHU university.(Feb ,2008)
  2. Paper titled “SCM for SME competitiveness” selected for presentation        in
     International Conference organized by RITM, Mathura. (Feb 11th -12th ,2009)

 Seminars, Workshops, Conferences attended:
  Attended one day seminar on “Advancements in Manufacturing Techniques” at
      Northern India Engineering College on 27th February 2009.
  Paper entitled “C.I.M & Small and Medium Enterprises” presented in one
      day seminar at at Northern India Engineering College on 27th February 2009.


Mrs.Rishu Sharma
(Lecturer, MAE)

 Publication in National Journal:
 1. Paper titled “Flexibility and productivity issues in job shop production systems” in
    Productivity promotion Journal (July-Dec, 2007)

 Publication in National Conference:

 1. Paper titled “Use of machine vision in pattern matching and blob analysis for a
    robotic system” in National Conference on Trends and Advances in Mechanical
    Engineering organized by YMCA Institute of Engineering.(Dec 9th -10th ,2006)
 2. Paper titled “Testing and Implementation of fuzzy Adaptive Simplex Search
    Optimization Algorithm.” in National Conference on Automation in Manufacturing
     Technology organized by Northern India Engineering College, Delhi. (March 24-
     25, 2006)

   Seminars/Workshops, Conferences Attended
   1. Workshop on ARENA Simulation Software organized by Delhi College of
      Engineering, Delhi
   2. Workshop on WITNESS Simulation Software organized by Delhi College of
      Engineering, Delhi (11th -12th Jan,2008)
   3. National Level Workshop cum Seminar on Soft Computing Techniques organized
      by MAIT, Delhi (December 11-21, 2007)
   4. Workshop on Computer Integrated Manufacturing Systems organized by IGIT,
      Delhi (march 27-28,2008)

Sushila Rani
(Lecturer, MAE)

Publication in National Conference:

   1) Paper entitled “Inverse Kinematic Analysis of Robotic Manipulator Using Iterative
       Algorithm ” published in proceedings of National Conference at Moradabad
       Institute of Technology, Moradabad ,from 28th February to 1st March 2009.
   2) Paper entitled “Six Sigma : An Engineering Quality Control and Value added Tool
       in Industry” published in proceedings of National Conference at Gian Jyoti
       Institute of Management and Technology, Chandigarh , March 25th ,2006
    3) Paper entitled “C.I.M & Small and Medium Enterprises” presented in one
      day seminar at at Northern India Engineering College on 27th February 2009.


Seminars,Workshops, Conferences Attended
   1. Attended two days workshop on “Recent Trends in new & sustainable energy
      sources at Guru Premsukh Memorial College of Engineering from 12th February
      to 13th February 2009.
   2. Conducted & Attended one day workshop on “Recent Trends in Technology for
      computer Aided Manufacturing” at Northern India Engineering College on 27th
      October 2006.
   3. Attended twelve days workshop on “Advanced Technology” conducted by NIIT
      from 19th July to 30th July 2000.
   4. Attended one day seminar on “Advancements in Manufacturing Techniques” at
      Northern India Engineering College on 27th February 2009.
   5. Attended one day seminar on “Soft Computing Techniques” at Maharaja Agrasen
      Institute of Technology on 21st December 2007
   6. Conducted & Attended two days National Conference on “Automation in
      Manufacturing Technology” at Northern India Engineering College from 24th
      March to 25th March 2006.
   7. Attended one day National Conference on “Technology Management” at National
      Conference at Gian Jyoti Institute of Management and Technology, Chandigarh ,
      March 25th ,2006
   8. Attended two days National Conference on “ Advances in Mechanical
      Engineering “ at Moradabad Institute of Technology, Moradabad ,from 28th
      February to 1st March 2009.


Kapil Gawri
Lecturer
Seminar, Workshops, Conferences attended:
   1. Attended two days workshop on “Recent Trends in new & sustainable energy
      sources at Guru Premsukh Memorial College of Engineering from 12th February
      to 13th February 2009.

   2. Attended two weeks Staff Development Programme on power station operation
   and
      control at MAIT from 20th July to 31st July 2009.

Garima Sharma
Lecturer
Seminar, Workshops, Conferences attended:
   1. Attended two days workshop on “Recent Trends in new & sustainable energy
      sources at Guru Premsukh Memorial College of Engineering from 12th February
      to 13th February 2009.

   2. Attended two weeks Staff Development Programme on power station operation
   and
      control from MAIT 20th July to 31st July 2009.

   3. Attended four days short term programme on emerging trends in Engineering and
     Technology at JNIT , Jaipur from 22nd May to 26th May 2006.


Harsha Goel
  Lecturer

Publication in National Conference:
   1. Paper entitled “FDM and FEM for Velocity Horn of Ultrasonic Machine ”
       published in National conference at G.C.E., Ramanagaram on 11-12th march
       2005.

Seminar, Workshops, Conferences attended:
   1. Attended workshop on “Recent Trends in Technology for Computer Aided
      Manufacturing” at Northern India Engineering College on October 27, 2006.

   2. Attended two days workshop on “Computers Integrated Manufacturing System”
      (CIMS) at IGIT from 27th march to 28th march 2008.
   3. Attended two days commerce conference at Smt. L.R.T. College of Commerce,
      Akola on 24th -25th feb 2002.
   4. Conducted one day National Conference on “Advancements in Manufacturing
      Techniques(AMT-2009)” on 27th feb 2009.

Paramjeet Kaur
     Lecturer
Seminar, Workshops, Conferences attended:

   1. National Conference on Soft Computing held at MAIT on 21st Dec, 2009.

   2. Attended and arranged two-weeks workshop on “Soft Computing” held at MAIT.

   3. Attended AICTE sponsored staff development Program on “Power Station
      Operation & Control”, held for two weeks at MAIT.

   4. Attended International Conference on “Design Planning & Control Issues in
      FMS” at DBM, Bahadurgarh.

Naveen Solanki
Lecturer
Seminar, Workshops, Conferences attended:
   1. Attended two days workshop on “Recent Trends in new & sustainable energy
      sources at Guru Premsukh Memorial College of Engineering from 12th February
      to 13th February 2009.

   2. Attended two weeks Staff Development Programme on power station operation
   and
       control at MAIT from 20th July to 31st July 2009.

   3.   Attended Training Programme on “ Modern Manufacturing Trends” at CITM,
        Faridabad from 23rd to 27th June 2008.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:55
posted:10/11/2011
language:English
pages:13