Microstructure and Materials Properties by huanghengdong

VIEWS: 13 PAGES: 6

									International Journal of

Microstructure and
Materials Properties
Scope of the Journal
The IJMMP publishes contributions on various mechanical, electric, magnetic,
optical, properties of metal, ceramic and polymeric materials in terms of the crystal
structure and microstructure. Papers treat all aspects of materials, i.e., their
selection, characterisation and evaluation in the phase of decision-making in design
and manufacturing of a new product. They cover the field of product, design,
improvement of material properties in various production processes. Attention is
also focused on materials from the viewpoint of physical metallurgy. New
technologies, new processes and related new materials, mathematical and physical
modelling of various processes optimisation and control of processes in terms of
microstructural and macroscopic material properties are included. Testing and
characterisation of mechanical and physical properties determined with standard
and non-standard methods are also addressed.

Subject coverage:
• Improvement of materials properties             • Quenching and distortion of steels
  through various manufacturing processes         • Materials with special properties
• Mechanical and physical testing of              • Particle size distribution and properties
  materials and their characterisation              of metals and alloys
• Non-destructive testing according to            • Solid/liquid interface morphologies
  characterisation of microstructure and            versus solidification rate
  materials properties                            • The influence of the mould/metal
• Surface integrity after mechanical                interface on casting or forging quality
  machining and heat treating and/or              • Modeling of microstructure formation of
  surface modification                              metals and alloys
• Creep testing, fatigue testing failure,         • Simulation of microstructure evaluation in
  analysis and fractures of various materials       metals and alloys
• Surface characterisation, chemical              • Advanced techniques for characterisation
  analysis and microanalysis of the surface         of electrochemical effect in stress corrosion
  layer                                             cracks
• Precipitation and dispersion hardening
• Dislocation interactions and strain hardening
• Distortion induced by deformation                   International Journal of

• Plastic strain and static strength                 Microstructure and
• Cyclic strain and fatigue strength                 Materials Properties
• Structure formation in deformed metals
  and alloys
• Analytical representation of creep curves
• Solute strengthening
• Quantitative microscopy
• Heat treatment of metals and alloys
• Chemical heat treatment of metals and
  alloys
• Laser surface engineering
• Electron beam surface modification
• Interface between polymers, metals and
  ceramics                                         www.inderscience.com/ijmmp

                    v i s i t w w w. i n d e r s c i e n c e . c o m
Members of the Editorial Board
Editor-in-Chief                                                         ˜˜
                                                Prof. Dr. José Luis Ocana
Prof. Dr. Janez Grum                            E.T.S. Ingenieros Industriales (U.P.M.), Spain
University of Ljubljana, Slovenia
                                                Prof. Dr. Tamas Réti
Editorial Board                                 Bánki Donát Polytechnic, Hungary
Prof. Dr. Helen V. Atkinson
University of Leicester, UK                     Prof. Dr. András Roósz
                                                Miskolc University, Hungary
Prof. Dr. Charlie R. Brooks
University of Tennessee, USA                    Prof. Dr. Mario Rosso
                                                Politecnico di Torino, Italy
Prof. Dr. Lauralice C.F. Canale
Universidade de Sao Paulo, Brazil               Dr. Valery Rudnev
                                                INDUCTOHEAT Group, USA
Prof. Dr. Horst H. Cerjak
Technical University Graz, Austria              Prof. Dr. Berthold Scholtes
                                                Universität Kassel, Germany
Prof. Dr. Tara Chandra
University of Wollongong, Australia             Mr. Soren Segerberg
                                                Heattec, Sweden
Prof. Dr. Rafael Colás
Universidad Autónoma de Nuevo León,             Prof. Dr. Bozo Smoljan
Mexico                                          University of Rijeka, Croatia

Prof. Dr. Narendra B. Dahotre                   Prof. Dr. Miklós Tisza
The University of Tennessee, USA                University of Miskolc, Hungary

Prof. Dr. Jeff Th. M. De Hosson                 Prof. Dr. Jose M. Torralba
University of Groningen, Netherlands            Universidad Carlos III de Madrid, Spain

Dr. Georg Ernst                                 Prof. Dr. Ericsson Torsten
Joanneum Research Forschungsgesellschaft,       Linköping University, Sweden
Austria
                                                Dr. George E. Totten
Prof. Dr. Cemil Hakan Gür                       Portland State University, USA
Middle East Technical University, Turkey
                                                Mr. George F. Vander Voort
Prof. Dr. Mohamed S. Hamed                      Buehler Ltd, USA
McMaster University, Canada
                                                Prof. Dr. Rui Vilar
                       ´
Prof. Dr. Bozidar Liscic                        Instituto Superior Técnico, Portugal
University of Zagreb, Croatia
                                                Prof. Dr. Leszek Wojnar
Prof. Dr. Xinmin Luo                            Cracow University of Technology, Poland
Jiangsu University,
China                                           Prof. Dr.-Ing. Hans-Werner Zoch
                                                IWT - Stiftung Institut für Werkstofftechnik,
Prof. Dr. Pavel Mazal                           Germany
Brno University of Technology (BUT Brno),
Czech Republic




                       v i s i t w w w. i n d e r s c i e n c e . c o m
                                                      Methods of payment

Content of Inaugural                                  To be completed by all subscribers
Issue of IJMMP                                        Terms are payment with order. Payment by
VOL. 1(1), 2005                                       cheque, banker’s draft or credit card is
                                                      acceptable.
A note on the effect of temperature on the
friction and wear behaviour of carbon-fibre-
reinforced Polyetheretherketone (PEEK-                Name of subscriber
CF30) at dry sliding
J. Paulo Davim, Rosaria Cardoso                       ............................................................................

Microstructure variations in the laser surface         ...........................................................................
remelted layer of nodular iron
                                                      Position ..............................................................
Janez Grum, Roman Sturm
                                                      Institution ............................................................
Study of diffusion across PVD-coated cermet
tool/workpiece interface                              Address ..............................................................
Mirko Sokovic
                                                       ...........................................................................
Design and usage of a simple miniature
specimen test setup for the evaluation of              ...........................................................................
mechanical properties
G. Partheepan, D.K. Sehgal, R.K. Pandey                ...........................................................................

Nondestructive investigation of the effect of          ...........................................................................
quenching and tempering on medium-
carbon low alloy steels                                ...........................................................................
C. Hakan Gur, B. Orkun Tuncer
                                                       ...........................................................................
Density and viscosity of the silicate melts for        ...........................................................................
the production of the mineral wool fibres
Brane Sirok, Bogdan Blagojevic, Peter Bullen,         Fax ......................................................................
Dusan Dimovski
                                                      E-mail .................................................................
Effect of microstructure on mechanical
behaviour of chilled Pb/Sb/Sn/As Alloy-
                                                      Credit card type and number
Al2SiO5 (Kaolinite) metal matrix composites
                                                  Ê




Joel Hemanth                                          ............................................................................
The formation of a boronised layer on                 ............................................................................
aluminised steel and surface corrosion
behaviours                                            Expiry date .........................................................
Xinmin Luo, Diankai Li, Kangmin Chen
                                                      Three-digit security number
Ultrasonic fatigue life of 40CrNiMoA                  (on the reverse of the credit card) ......................
(AISI4340) steel and its influencing factors
Honghong Shao, Guang Chen, Xinmin Luo                 Signature.............................................................

Self-regulated thermal processes during               Date ....................................................................
quenching of steels in liquid media
Nikolai I. Kobasko                                    Please address subscription orders to the
                                                      address overleaf
Subscription order form
To find out the subscription rates for
                                                                        What the experts say
International Journal of Microstructure and
Materials Properties (IJMMP),
                                                                        about IJMMP
                                                                        “Before now, the publication of rigorous and insightful
please go to
                                                                        thermal process papers has been a highly fragmented
www.inderscience.com/ijmmp or                                           enterprise with contributions spread over many
http://www.inderscience.com/subscribe.php                               journals worldwide. Now with IJMMP, it is possible to
                                                                        follow the most significant advances in materials
(for all Inderscience titles, including IJMMP)                          science and engineering by reading one journal. These
                                                                        advances involve bulk thermal processing effects and
                                                                        surface engineering as well as advances in emerging
This form may be photocopied or                                         technologies. Content includes science and
downloaded from                                                         engineering of new materials and processes, structure
www.inderscience.com/www/ielsubsform2.pdf                               and property characterisation, modelling and testing
                                                                        technologies. This is indeed an important new journal.”
                                                                        Prof. Dr. George E. Totten
Journals may be ordered online from                                     Portland State University
http://inderscience.metapress.com                                       Department of Mechanical and Materials
                                                                        Engineering, Portland, OR, USA

Please address subscription orders to:                                  “By following the latest nano, micro and macroscopic
                                                                        techniques for structure analysis of bulk materials as
lnderscience Enterprises Ltd. (Order Dept.)                             well as of surface layer properties and steadily
World Trade Center Building II                                          developing mathematical modelling software, this new
                                                                        journal will substantially contribute to deepen the
29 Route de Pre-Bois,
                                                                        knowledge in the field of materials science.
Case Postale 856,                                                       Application of this knowledge to different conventional
CH-1215 Genève 15,                                                      as well as most modern materials engineering
SWITZERLAND                                                             processes is a special feature of this journal.”
                                                                        Prof.Dr.Bozidar Liscic ´
                                                                        Former President of International Federation for
For rush orders please:                                                 Heat Treatment and Surface Engineering (IFHTSE),
fax: +44 1234 240515 or                                                 University of Zabreb, Croatia
E-mail: editorial@inderscience.com
                                                                        Relevant
Please enter the following regular                                      Inderscience Titles
subscriptions to IJMMP                                                  International Journal of Embedded Systems
                                                                        International Journal of Forensic Engineering
........ subscriptions (Print or Online)                                International Journal of Manufacturing
                                                                    Ê




[delete as necessary]                                                   Technology and Management
                                                                        International Journal of Materials and Product
                                                                        Technology
........ subscriptions (Print and Online)                               International Journal of Materials and Structural Integrity
                                                                        International Journal of Nanotechnology
                                                                        International Journal of Product Development
Total cost ..........................................................   International Journal of Product Lifecycle Management
                                                                        International Journal of Reliability and Safety
                                                                        These titles are part of a unique profile on: PRODUCT
                                                                        DEVELOPMENT, MATERIALS AND MANUFACTURING

Methods of payment overleaf                                              For information about these titles and the
                                                                         substantial portfolio of journals developed
                                                                         by Inderscience, please visit the website at:
                                                                         www.inderscience.com
Notes for Authors and Submission of Papers
Submitted papers should not have been previously published or be currently under
consideration for publication elsewhere.

All papers are refereed through a double-blind process. A guide for authors and other
relevant information for submitting papers are available on the Submission of Papers
section of the Inderscience website: please go to

Author Guidelines
(www.inderscience.com/guidelines)

To submit a paper, please go to

Submission of Papers
(http://www.inderscience.com/papers)

For queries concerning the journal, please contact:

Editor-in-Chief,
Prof. Dr. Janez Grum
Faculty of Mechanical Engineering
University of Ljubljana
Askerceva 6, SI-1000 Ljubljana
Slovenia
E-mail: janez.grum@fs.uni-lj.si

with a copy to:
Editorial Office,
E-mail: editorial@inderscience.com

(Please include in your submission the title of the Journal)




                   ISSN: 1741-8410 (Print), ISSN: 1741-8429 (Online)

								
To top