Grain Chart

Document Sample
Grain Chart Powered By Docstoc
					                                                                                    INTERIOR
                   Updated: Dec 2, 2010
                                                                                  THEME COLOR
                                                                                                              DESIGN APPEARANCE SURFACE DEFINITION                                                                                                                                                                                                         CHEVY                                                                                                                                         GSV SUV CHEVY MEXICO
                                                                            C/O                                                                                                                                                                                                                                       LS           LS           LT           LT            LT          LTZ          LTZ           LTZ                         Tier 1                         Tier 2            MATERIAL                                      CONTRACTED                                          CONTRACTED               PAINT MATERIAL
           NEW      UPC     FNA                     COMMON PART NAME OR                 600R                                                                            REQUIRED MATERIAL TYPE                                                                                                              MODEL                                                                                                                                                                                                   CONTRACTED                                        CONTRACTED
SYSTEM                             FNA PART NAME                             or                              GRAIN                 GLOSS         PPAP MASTER                                                                                                NOTES                                                   (J.Black/    (J.Black/    (J.Black/    (J.Black/      (J.Black/   (J.Black/    (J.Black/      (J.Black/    Tier 1   contact & phone/e-    Tier 2       contact &         SPECIFICATION
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    MFG PROCESS
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            MATERIAL TYPE/
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  VENDOR/COLOR SOURCE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  PAINT SHOP                 SUPPLIER
          ITEM#    CODE    CODE                     WORKING DESCRIPTION              JET BLACK                                                                              (ABBREVIATION)                                                                                                                  YEAR    J.Black)    M.Titanium)   J.Black)    M.Titanium)   Brownstone)    j.Black)   M.Titanium)   Brownstone)                    mail                       phone/e-mail           (F10)                                     RESIN TRADE NAME                                       & CONTACT                 & CONTACT
                                                                            CCC
                                                                                                                                                                                                                                                                                                                                                                                                                                          Hyeong-Jin Kim               NIFCO/Moon-Ki Baek                                                                           BASSEL / Deok-Soo, Kim          Daechang-Ind.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       PPG / Yong-Jung, Choi
                                                                                        600R         GMGT 004 HANA MIN DRAFT 8˚
                                                                                                                                           COLOR/GLOSS : WPEPGLG 313N                                                                                                                                                                                                                                                                     82-32-820-6328                /82-10-5345-6974/                                                                              / 011-1717-2094 /           /Hyeon-Sik Kim/
                   1A2B    3675A   DOOR-I/P COMPT   DOOR - COMPT I/P UPR                                                            GLG                                 PC/ABS + HARD TOUCH PAINTED                                                                                                                                                                                                                             DK                            NIFCO                            GMW15340                INJECTION             PP+EPDM+TD20                                                                 / 011-317-9456 /
                                                                                     JET BLACK                                                GRAIN : GMGT 004 HANA                                                                                                                                                                                                                                                                      82-11-9788-5600               mkbaek@nifco.co.kr                                                                         ducksoo.kim@lyondellbasell.c   / 82-16-488-2093 /
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       royalpaint@paran.com
                                                                                                                                                                                                                                                                                                                                                                                                                                        osanair@dktec.co.kr                                                                                                                   om               khswood@hanmail.net
                                                          Example                                                                 Example                                                                                                                                                                                                             Example                                                                             Hyeong-Jin Kim               NIFCO/Moon-Ki Baek                              Example                                      BASSEL / Deok-Soo, Kim          Daechang-Ind.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       PPG / Yong-Jung, Choi
                                                                                        600R         GMGT 004 HANA MIN DRAFT 8˚
                                                                                                                                           COLOR/GLOSS : WPEPGLG 831K                                                                                                                                                                                                                                                                     82-32-820-6328                /82-10-5345-6974/                                                                              / 011-1717-2094 /           /Hyeon-Sik Kim/
                   1A2B    3675A   DOOR-I/P COMPT   DOOR - COMPT I/P UPR                                                            GLG                                 PC/ABS + HARD TOUCH PAINTED                                                                                                                                                                                                                             DK                            NIFCO                            GMW15340                INJECTION             PP+EPDM+TD20                                                                 / 011-317-9456 /
                                                                                     JET BLACK                                                GRAIN : GMGT 004 HANA                                                                                                                                                                                                                                                                      82-11-9788-5600               mkbaek@nifco.co.kr                                                                         ducksoo.kim@lyondellbasell.c   / 82-16-488-2093 /
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       royalpaint@paran.com
                                                                                                                                                                                                                                                                                                                                                                                                                                        osanair@dktec.co.kr                                                                                                                   om               khswood@hanmail.net


 CONSOLE                                                                                                                                                                                                                   GRAMMER COMMENTS & CONCERNS


                                                                                                                                                                                                        Current Material used on GM Projects @ Grammer:
                                   CONSOLE BASE
                                                    CONSOLE BASE ASSEMBLY               600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.010    TBD      TBD    ASSEMBLY                                                           GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                      At this point       GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                                    (LH/RH)                          JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                   (LH/RH)
                                                                                                                                                                                                        2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin




                                                    CONSOLE REAR                                                                                                                                        Current Material used on GM Projects @ Grammer:
                                   CONSOLE REAR     TRIMPLATE                           600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.020    TBD      TBD                                                                       GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                   TRIMPLATE        (IS NOW PART OF 3.01             JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                                    MAIN CONSOLE BASE)                                                                                                                                  2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin




                                                                                                                                             COLOR : WPPGLG-600R                                        GMW15816 spec refers to TPV, It is not TPE.
                                                                                        600R                TBD                                                                                                                                                                                                                                                                                                                          Fred Teng / Asia                                       GMW15816                                   TPV (EPDM+PP) Type 6           COMTREX
CONSOLE   3.030    TBD      TBD    MAT              MAT
                                                                                     JET BLACK       (TECHNICAL GRAIN)
                                                                                                                                   PGE           GRAIN : TBD                       TPV                  - In House Production Concept (PLAN to mold in house)                                               2013       X            X            X            X             X            X            X             X         GRAMMER
                                                                                                                                                                                                                                                                                                                                                                                                                                         Vilas Vaidya / NA                                  Type 6 noted in CAD
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  Pre Coloured Injection
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Noted in CAD             TREXPRENE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        -                        -
                                                                                                                                                 GLOSS : PGE                                            No Type Provided/Defined in ARD but GMW15816-TYPE-6 noted in CAD DCS Log.




                                                                                                                                                                                                        GMW15816 spec refers to TPV, It is not TPE.
                                                                                                     SIDEWALL : GMGF003                                                                                 - In House Production Concept (PLAN to mold in house)
                                                                                                            BAHIA                            COLOR : WPPGLG-600R                                        NOTE: In CAD DCS LOG the middle cupholder Liner & Forward (1st) Cupholder Liner are DIFFERENT
                                                                                        600R                                                                                                                                                                                                                                                                                                                                             Fred Teng / Asia                                                                                                                 COMTREX
CONSOLE   3.040    TBD      TBD    CUPHOLDER LINER CUPHOLDER LINER
                                                                                     JET BLACK
                                                                                                        BOTTOM : TBD               PGE       GRAIN : GMGF003, TBD                  TPV                  TYPEs.                                                                                              2013       X            X            X            X             X            X            X             X         GRAMMER
                                                                                                                                                                                                                                                                                                                                                                                                                                         Vilas Vaidya / NA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               GMW15816           Pre Coloured Injection      TPV (EPDM+PP)
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         TREXPRENE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        -                        -
                                                                                                        (TECHNICAL or                            GLOSS : PGE
                                                                                                           DARWIN)
                                                                                                                                                                                                        Forward (1st) cupholder Liner is Type GMW15812P-TPV




                                                                                                                                                                                                        THIS IS NOT PART OF GRAMMER CONTENT.
                                                                                                                                                                                                        Information provided is suggestion only IF Grammer becomes responsible for this part.
                                   PARK BRAKE                                           600R                                                                                                                                                                                                                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.050    TBD      TBD                     PARK BRAKE CLOSE OUT                              GMGA001 DARWIN               PGE              PP0033                           PP                                                                                                                     2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                   CLOSE OUT                                         JET BLACK                                                                                                          Current Material used on GM Projects:                                                                                                                                                                                            Vilas Vaidya / NA                                                                                                                ADX-1056
                                                                                                                                                                                                        1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EP(D)M-M20 ( 1ST OPTION RECOMENDATION )
                                                                                                                                                                                                        2) GMT 3




                                   CONSOLE                                                                                                                                                              Current Material used on GM Projects @ Grammer:
                                   FORWARD          CONSOLE FORWARD                     600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.060    TBD      TBD                                                                       GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                   TRIMPLATE        TRIMPLATE ASSEMBLY               JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                   ASSEMBLY                                                                                                                                                             2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin



                                   CONSOLE                                                                                                                                                              Current Material used on GM Projects @ Grammer:
                                   FORWARD                                              600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.061    TBD      TBD                     BIN                                               GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                   TRIMPLATE                                         JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                   ASSEMBLY                                                                                                                                                             2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin

                                   CONSOLE                                                                                                                                                              GMW15816 spec refers to TPV, It is not TPE.
                                                                                                                                             COLOR : WPPGLG-600R
                                   FORWARD                                              600R                TBD                                                                                         - In House Production Concept (PLAN to mold in house)                                                                                                                                                                            Fred Teng / Asia                                                                                  TPV (EPDM+PP) Type ?           COMTREX
CONSOLE   3.062    TBD      TBD
                                   TRIMPLATE
                                                    MAT
                                                                                     JET BLACK       (TECHNICAL GRAIN)
                                                                                                                                   PGE           GRAIN : TBD                       TPV                  No Material TYPE Provided/Defined as GM spec requests; please consider Type 5,6,7 or 8 on design,
                                                                                                                                                                                                                                                                                                            2013       X            X            X            X             X            X            X             X         GRAMMER
                                                                                                                                                                                                                                                                                                                                                                                                                                         Vilas Vaidya / NA
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               GMW15816           Pre Coloured Injection
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 (5,6,7&8)               TREXPRENE
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        -                        -
                                                                                                                                                 GLOSS : PGE
                                   ASSEMBLY                                                                                                                                                             Supplier SUGGESTION is based on those types as they are

                                   CONSOLE                                                                                                                                                              PLAN is to Buy this Part.
                                   FORWARD                                              600R                                                                                                                                                                                                                                                                                                                                             Fred Teng / Asia                                      GMW15581 /                                      ABS+PC-T3 /               Styron Mexico                                SHERWIN-WILLIAMS CO
CONSOLE   3.063a   TBD      TBD                     SHELF                                                   GMSF001                PGC              PT004D                  SOFT TOUCH PAINT                                                                                                                2013       X            X            --           --            --           --           --            --        GRAMMER                                                                               Injection + Paint                                                               PERTEK
                                   TRIMPLATE                                         JET BLACK                                                                                                          PGC-will need to work with paint supplier to achieve.                                                                                                                                                                            Vilas Vaidya / NA                                     GMW15516                                          TYPE A             Pulse 2000EZ Nat + MB                                 SOFT TOUCH
                                   ASSEMBLY                                                                                                                                                             Sherwin Williams is approved for this spec.

                                                                                                                                                                                                        PLAN is to Buy this Part.
                                   CONSOLE                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                Dhake Industries
                                   FORWARD                                               126V                                                                                                                                                                                                                                                                                                                                            Fred Teng / Asia                                      GMW15581 /                                      ABS+PC-T3 /               Styron Mexico                                   SSCP (Korea) Color
CONSOLE   3.063b   TBD      TBD                     SHELF                                                   GMSF001                GL80               TBD                          PAINT                Will work with Dhake Industires (current paint supplier for GMX353 Console Graphite Silver)         2013       --           --           X            X             X            X            X             X         GRAMMER                                                                               Injection + Paint                                                               PERTEK
                                   TRIMPLATE                                       LIQUID PLATINUM                                                                                                                                                                                                                                                                                                                                       Vilas Vaidya / NA                                     GMW15516                                          TYPE C             Pulse 2000EZ Nat + MB                                  Development
                                   ASSEMBLY                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 United Paint
                                                                                                                                                                                                        Gloss of GL80 - will need to work with paint supplier to achieve.

                                                                                                                                                                                                        PLAN is to Buy this Part.
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                          Dhake Industries
                                                                                         126V                                                                                                                                                                                                                                                                                                                                            Fred Teng / Asia                                      GMW15581 /                                      ABS+PC-T3 /               Styron Mexico                                   SSCP (Korea) Color
CONSOLE   3.070a   TBD      TBD    SHIFTER BEZEL    SHIFTER BEZEL                                           GMSF001                GL80               TBD                          PAINT                Will work with Dhake Industires (current paint supplier for GMX353 Console Graphite Silver)         2013       X            X            --           --            --           --           --            --        GRAMMER                                                                               Injection + Paint                                                               PERTEK
                                                                                   LIQUID PLATINUM                                                                                                                                                                                                                                                                                                                                       Vilas Vaidya / NA                                     GMW15522                                          TYPE C             Pulse 2000EZ Nat + MB                                  Development
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            United Paint
                                                                                                                                                                                                        Gloss of GL80 - will need to work with paint supplier to achieve.
                                                                                                                                                                                                        PLAN is to Buy this Part.
                                                                                        600R                                                                                                                                                                                                                                                                                                                                             Fred Teng / Asia                                      GMW15581 /                                      ABS+PC-T3 /               Styron Mexico                                SHERWIN-WILLIAMS CO
CONSOLE   3.070b   TBD      TBD    SHIFTER BEZEL    SHIFTER BEZEL                                           GMSF001                PGC              PT004D                  SOFT TOUCH PAINT                                                                                                                2013       --           --           X            X             X            X            X             X         GRAMMER                                                                               Injection + Paint                                                               PERTEK
                                                                                     JET BLACK                                                                                                          PGC-will need to work with paint supplier to achieve.                                                                                                                                                                            Vilas Vaidya / NA                                     GMW15516                                          TYPE A             Pulse 2000EZ Nat + MB                              5GL SB SOFT TOUCH
                                                                                                                                                                                                        Sherwin Williams is approved for this spec.
                                                                                                                                                                                                        Current Material used on GM Projects @ Grammer:
                                   CONSOLE BASE    CONSOLE BASE                         600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.080    TBD      TBD                                                                       GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                   EXTENSION PANEL EXTENSION PANEL                   JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                                                                                                                                                                                        2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin



                                                                                                                                                                                                        Current Material used on GM Projects @ Grammer:
                                   ASTRAY
                                                   ASTRAY ASSEMBLY-                     600R                                                                                           PP               1) GMX353 Buick Lacrosse NA is GMW15340P-PP+EPDM-M20 (currently using a TPO Advanced                                                                                                                                             Fred Teng / Asia                                                                                                            Advanced Composites
CONSOLE   3.090    TBD      TBD    ASSEMBLY-MUFFIN                                                    GMGA001 DARWIN               PGE              PP0033                                                                                                                                                  2013       X            X            X            X             X            X            X             X         GRAMMER                                                          GMW15548           Pre Coloured Injection    PP/PE-M17 Type 1B                                           -                        -
                                                   MUFFIN STYLE                      JET BLACK                                                                            (Talc Filled Polypropylene)   Composites ADX5023, it is not a Talc filled PP)                                                                                                                                                                                  Vilas Vaidya / NA                                                                                                                ADX-1056
                                   STYLE
                                                                                                                                                                                                        2) GMT 311 CAPTIVA 2011 : GMP.E/P.119 (or GMW equivalent) (currently usin




          REV000 - GSV SUV CHEVY MY 2013                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              1 of 25
                                                   3.061              3.062   3.063

                                                              C3.02
                                                                                        3.080
                                                                                                3.090




                                           3.101
                                                                                      3.060
                                   3.102

                           3.100



                   3.040


 3.050                                                                        3.070


   3.030



                                                      3.010




           3.021              3.020




     GRAIN DIRECTION



REV000 - GSV SUV CHEVY MY 2013                                                                          2 of 25
  Design Appearance Quality Contact:
  Name : Jinsu Ahn
  Phone : +82-32-520-4181
  email : Jinsu.ahn@gm.com



                                  Grains used on Program
                   Grain Number           Grain Name                 Draft Angle (Min.)
                     GMGF004              SAND F                     7.0
                     GMGT002              GRIDION                    7.0
                     GMGT005              VISTA                      6.0
                     GMGT009              MINI PLATEAU               8.5
                     GMGT001              TAFFETA                    6.0
                     GMGF001              BRAZIL                     2.5
                     GMGF003              BAHIA                      3.0
                     GMGT004              HANA                       5.0
                     GMGT007              MICRO TECH                 3.5
                    GMGA001               DARWIN                     7.5
                    GMGA010               ANCONA                     8.0
                     GMGF002              RIO                        2.0
                     GMGF006              SIMPSON                    3.0
                     GMGT008              DELTA TACTILE              10.5
                    GMGR004               EARTH                      6.5
                     GMGT016              MOON                       7.0
                     GMGT010              DEAKIN                     10.0

         * Grain washout area will be definied in GIF(Grain Instruction Form) during GIF workshop at SORP-42wee



REV000 - GSV SUV CHEVY MY 2013                                                                        3 of 25
                                                        DCS File Log                                   'Manufacturing' Page Information:
                                                        ----------------------------------------
                                                                                                       Tool Identifier       = ''
                                                                                                       Model                = ''
                                                        'General' (Lite) Page Information:             Program (Lead first)       = ''
                                                                                                       Model Year              = ''
                                                        Item No             = 'AVF87224'               Style              = ''
                                                        Item Revision           = '002.0004'           Using Plants (Lead first) = ''
                                                        Item Type            = 'CORP_Part'             Technology              = ''
                                                        Context             = 'GEO_FIN001'             Tool Level            = ''
                                                        DLS                = ''                        Manufacturing Type           = ''
                                                        Release Status           = 'X'
                                                        Relation            = ''                       'Designer Log' Information:
                                                        Item Name               = 'CONSOLE-F/FLR'
                                                        Item Description         = '100712'            'General Notes' Information:
ARD # 3.010                                             Density             = '1010'
                                                        Volume               = '0.00134684'            UNLESS OTHERWISE SPECIFIED:
Grain type GMGA001 DARWIN taken from ARD date 12/2/10   Area               = '0.948038'
                                                        Mass               = '1.3603'                  ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                                                        Matl Specification       = 'GMW15548'
                                                        Matl Tolerance          = ''                   PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                                                        Gauge               = '3'
                                                        Usage - UPC              = ''                  NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
                                                        VPPS                = '40.01.03.01.02'
                                                                                                       TOOL FINISH SHALL MEET OR EXCEED GM7466M
                                                        'Material Specification' Page Information:
                                                                                                       SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                                                        Matl Specification       = 'GMW15548'
                                                        Matl Description - 1       = ''                GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                                                        Matl Description - 2       = ''
                                                        Matl Description - 3       = ''                GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                                                        Matl Description - 4       = ''
                                                        Paint/Coating           = ''                   MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                                                        Paint/Coating - 2        = ''                  TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                                                        Paint/Coating - 3        = ''                  FUNCTION
                                                        Paint/Coating - 4        = ''
                                                        Part Performance            = ''               BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                        Part Performance - 2         = ''              EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                                                        Part Performance - 3         = ''
                                                        Part Performance - 4         = ''              HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                        Paint/Coating Perf         = ''                WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                                                        Paint/Coating Perf - 2 = ''
                                                        Paint/Coating Perf - 3 = ''                    FOGGING TEST PER GMW3235
                                                        Paint/Coating Perf - 4 = ''
                                                        Appearance to Match           = ''             ODOR TEST PER GMW3205
                                                        Appearance to Match - 2 = ''
                                                        Appearance to Match - 3 = ''                   CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                                                        Appearance to Match - 4 = ''
                                                        Part Finish           = ''                     DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                                                        Part Finish - 2        = ''
                                                        Part Finish - 3        = ''                    IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                                                        Part Finish - 4        = ''                    THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                                                        Service Part Reqs          = ''                TO PART REQUIREMENTS
                                                        Service Part Reqs - 2       = ''
                                                        Service Part Reqs - 3       = ''               LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                                                        Service Part Reqs - 4       = ''               APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                                                        Additional Reqs          = ''                  MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                                                        Additional Reqs - 2        = ''                AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                                                        Additional Reqs - 3        = ''                SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                                                        Additional Reqs - 4        = ''
                                                        Material Engineer          = ''                MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                        Appearance Engineer            = ''            OMISSION REQUIRES APPROVAL
                                                        Paint Engineer          = ''
                                                                                                       FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                        Change Description #1A: "PDI Comments:"        GM9070P AND MUST CONFORM WITH FMVSS 302

                                                                                                       RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                                                        'Contacts' Page Information:                   GMW3059

                                                        Designer                   = 'JUNGBAE, AN'
                                                        Desgnr Phone                  = ''
                                                        Supervisor                 = 'HEECHANG, WOO'
                                                        Suprvsr Phone                 = ''
                                                        Engineer                   = 'HEESUNG, PARK'
                                                        Engr Phone                  = ''
                                                        DCS File Log                                              'Designer Log' Information:
                                                        ----------------------------------------


                                                        'General' (Lite) Page Information:                        Work Order "OPEL P2 release"

                                                        Item No             = 'AVF44949'
                                                        Item Revision          = '002'                            'Contacts' Page Information:
                                                        Item Type            = 'CORP_Part'
                                                        Context             = 'GEO_FIN001'                        Designer             = 'JUNGBAE, AN'
                                                        DLS                = ''                                   Desgnr Phone            = ''
                                                        Release Status           = '2'                            Supervisor           = 'HEECHANG, WOO'
                                                        Relation            = ''                                  Suprvsr Phone           = ''
                                                        Item Name               = 'EXTENSION-F/FLR CNSL_LHD_LH'   Engineer             = 'HEESUNG, PARK '
                                                        Item Description         = '100415'                       Engr Phone            = ''
                                                        Density             = '1010'
ARD # 3.080                                             Volume               = '0.000251567'
                                                        Area               = '0.184024'                           'General Notes' Information:
Grain type GMGA001 DARWIN taken from ARD date 12/2/10   Mass               = '0.254083'
                                                        Matl Specification       = 'GMW15548'                     UNLESS OTHERWISE SPECIFIED:
                                                        Matl Tolerance          = ''
                                                        Gauge               = '3'                                 ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                                                        Usage - UPC              = ''
                                                        VPPS                = '40.01.03'                          PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P

                                                        Manufacturing' Page Information:                          NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

                                                        Tool Identifier      = ''                                 TOOL FINISH SHALL MEET OR EXCEED GM7466M
                                                        Model               = ''
                                                        Program (Lead first)      = ''                            SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                                                        Model Year             = ''
                                                        Style             = ''                                    GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                                                        Using Plants (Lead first) = ''
                                                        Technology             = ''                               GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                                                        Tool Level           = ''
                                                        Manufacturing Type          = ''                          MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                                                                                                                  TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                                                        'Material Specification' Page Information:                FUNCTION

                                                        Matl Specification      = 'GMW15548'                      BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                        Matl Description - 1      = ''                            EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                                                        Matl Description - 2      = ''
                                                        Matl Description - 3      = ''                            HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                        Matl Description - 4      = ''                            WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                                                        Paint/Coating          = ''
                                                        Paint/Coating - 2       = ''                              FOGGING TEST PER GMW3235
                                                        Paint/Coating - 3       = ''
                                                        Paint/Coating - 4       = ''                              ODOR TEST PER GMW3205
                                                        Part Performance           = ''
                                                        Part Performance - 2        = ''                          CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                                                        Part Performance - 3        = ''
                                                        Part Performance - 4        = ''                          DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                                                        Paint/Coating Perf        = ''
                                                        Paint/Coating Perf - 2 = ''                               IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                                                        Paint/Coating Perf - 3 = ''                               THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                                                        Paint/Coating Perf - 4 = ''                               TO PART REQUIREMENTS
                                                        Appearance to Match           = ''
                                                        Appearance to Match - 2 = ''                              LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                                                        Appearance to Match - 3 = ''                              APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                                                        Appearance to Match - 4 = ''                              MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                                                        Part Finish          = ''                                 AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                                                        Part Finish - 2       = ''                                SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                                                        Part Finish - 3       = ''
                                                        Part Finish - 4       = ''                                MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                        Service Part Reqs          = ''                           OMISSION REQUIRES APPROVAL
                                                        Service Part Reqs - 2       = ''
                                                        Service Part Reqs - 3       = ''                          FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                        Service Part Reqs - 4       = ''                          GM9070P AND MUST CONFORM WITH FMVSS 302
                                                        Additional Reqs         = ''
                                                        Additional Reqs - 2       = ''                            RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                                                        Additional Reqs - 3       = ''                            GMW3059
                                                        Additional Reqs - 4       = ''
                                                        Material Engineer         = ''
                                                        Appearance Engineer            = ''
                                                        Paint Engineer         = ''
                                                        DCS File Log                                              'Designer Log' Information:
                                                        ----------------------------------------
                                                        'General' (Lite) Page Information:                        Work Order "OPEL P2 release"

                                                        Item No             = 'AVF44950'                          'Contacts' Page Information:
                                                        Item Revision          = '002'
                                                        Item Type            = 'CORP_Part'                        Designer             = 'JUNGBAE, AN'
                                                        Context             = 'GEO_FIN001'                        Desgnr Phone            = ''
                                                        DLS                = ''                                   Supervisor           = 'HEECHANG, WOO'
                                                        Release Status           = '2'                            Suprvsr Phone           = ''
                                                        Relation            = ''                                  Engineer             = 'HEESUNG, PARK '
                                                        Item Name               = 'EXTENSION-F/FLR CNSL_LHD_RH'   Engr Phone            = ''
                                                        Item Description         = '100415'
                                                        Density             = '1010'
                                                        Volume               = '0.000250331'                      'General Notes' Information:
                                                        Area               = '0.182578'
                                                        Mass               = '0.252834'                           UNLESS OTHERWISE SPECIFIED:
                                                        Matl Specification       = 'GMW15548'
ARD # 3.080                                             Matl Tolerance          = ''                              ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                                                        Gauge               = '3'
Grain type GMGA001 DARWIN taken from ARD date 12/2/10   Usage - UPC              = ''                             PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                                                        VPPS                = '40.01.03'
                                                                                                                  NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
                                                        'Manufacturing' Page Information:
                                                                                                                  TOOL FINISH SHALL MEET OR EXCEED GM7466M
                                                        Tool Identifier      = ''
                                                        Model               = ''                                  SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                                                        Program (Lead first)      = ''
                                                        Model Year             = ''                               GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                                                        Style             = ''
                                                        Using Plants (Lead first) = ''                            GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                                                        Technology             = ''
                                                        Tool Level           = ''                                 MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                                                        Manufacturing Type          = ''                          TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                                                                                                                  FUNCTION
                                                        'Material Specification' Page Information:
                                                                                                                  BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                        Matl Specification      = 'GMW15548'                      EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                                                        Matl Description - 1      = ''
                                                        Matl Description - 2      = ''                            HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                        Matl Description - 3      = ''                            WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                                                        Matl Description - 4      = ''
                                                        Paint/Coating          = ''                               FOGGING TEST PER GMW3235
                                                        Paint/Coating - 2       = ''
                                                        Paint/Coating - 3       = ''                              ODOR TEST PER GMW3205
                                                        Paint/Coating - 4       = ''
                                                        Part Performance           = ''                           CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                                                        Part Performance - 2        = ''
                                                        Part Performance - 3        = ''                          DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                                                        Part Performance - 4        = ''
                                                        Paint/Coating Perf        = ''                            IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                                                        Paint/Coating Perf - 2 = ''                               THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                                                        Paint/Coating Perf - 3 = ''                               TO PART REQUIREMENTS
                                                        Paint/Coating Perf - 4 = ''
                                                        Appearance to Match           = ''                        LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                                                        Appearance to Match - 2 = ''                              APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                                                        Appearance to Match - 3 = ''                              MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                                                        Appearance to Match - 4 = ''                              AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                                                        Part Finish          = ''                                 SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                                                        Part Finish - 2       = ''
                                                        Part Finish - 3       = ''                                MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                        Part Finish - 4       = ''                                OMISSION REQUIRES APPROVAL
                                                        Service Part Reqs          = ''
                                                        Service Part Reqs - 2       = ''                          FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                        Service Part Reqs - 3       = ''                          GM9070P AND MUST CONFORM WITH FMVSS 302
                                                        Service Part Reqs - 4       = ''
                                                        Additional Reqs         = ''                              RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                                                        Additional Reqs - 2       = ''                            GMW3059
                                                        Additional Reqs - 3       = ''
                                                        Additional Reqs - 4       = ''
                                                        Material Engineer         = ''
                                                        Appearance Engineer            = ''
                                                        Paint Engineer         = ''
                         DCS File Log
                         ----------------------------------------


                         'General' (Lite) Page Information:                        'Manufacturing' Page Information:

                         Item No             = 'AVF87232'                          Tool Identifier       = ''
                         Item Revision           = '002.0002'                      Model                = ''
                         Item Type            = 'CORP_Part'                        Program (Lead first)       = ''
                         Context             = 'GEO_FIN001'                        Model Year              = ''
                         DLS                = ''                                   Style              = ''
                         Release Status           = 'X'                            Using Plants (Lead first) = ''
                         Relation            = ''                                  Technology              = ''
                         Item Name               = 'HOUSING-F/FLR-CNSL CUP HLDR'   Tool Level            = ''
                         Item Description         = '100712'                       Manufacturing Type           = ''
                         Density             = '1010'
                         Volume               = '0.000328128'                      'Designer Log' Information:
                         Area               = '0.234922'
N/A                      Mass               = '0.331409'                           'General Notes' Information:
                         Matl Specification       = 'GMW15548'
PART NOT LISTED ON ARD   Matl Tolerance          = ''                              UNLESS OTHERWISE SPECIFIED:
PART NOT GRAINED         Gauge               = '3'
                         Usage - UPC              = ''                             ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                         VPPS                = '40.01.03'
                                                                                   PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                         'Material Specification' Page Information:
                                                                                   NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
                         Matl Specification       = 'GMW15548'
                         Matl Description - 1       = ''                           TOOL FINISH SHALL MEET OR EXCEED GM7466M
                         Matl Description - 2       = ''
                         Matl Description - 3       = ''                           SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                         Matl Description - 4       = ''
                         Paint/Coating           = ''                              GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                         Paint/Coating - 2        = ''
                         Paint/Coating - 3        = ''                             GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                         Paint/Coating - 4        = ''
                         Part Performance            = ''                          MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                         Part Performance - 2         = ''                         TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                         Part Performance - 3         = ''                         FUNCTION
                         Part Performance - 4         = ''
                         Paint/Coating Perf         = ''                           BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                         Paint/Coating Perf - 2 = ''                               EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                         Paint/Coating Perf - 3 = ''
                         Paint/Coating Perf - 4 = ''                               HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                         Appearance to Match           = ''                        WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                         Appearance to Match - 2 = ''
                         Appearance to Match - 3 = ''                              FOGGING TEST PER GMW3235
                         Appearance to Match - 4 = ''
                         Part Finish           = ''                                ODOR TEST PER GMW3205
                         Part Finish - 2        = ''
                         Part Finish - 3        = ''                               CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                         Part Finish - 4        = ''
                         Service Part Reqs          = ''                           DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                         Service Part Reqs - 2       = ''
                         Service Part Reqs - 3       = ''                          IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                         Service Part Reqs - 4       = ''                          THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                         Additional Reqs          = ''                             TO PART REQUIREMENTS
                         Additional Reqs - 2        = ''
                         Additional Reqs - 3        = ''                           LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                         Additional Reqs - 4        = ''                           APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                         Material Engineer          = ''                           MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                         Appearance Engineer            = ''                       AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                         Paint Engineer          = ''                              SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY

                         Change Description #1A: "PDI Comments:"                   MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                                                   OMISSION REQUIRES APPROVAL

                         'Contacts' Page Information:                              FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                                                   GM9070P AND MUST CONFORM WITH FMVSS 302
                         Designer                   = 'JUNGBAE, AN'
                         Desgnr Phone                  = ''                        RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                         Supervisor                 = 'HEECHANG, WOO'              GMW3059
                         Suprvsr Phone                 = ''
                         Engineer                   = 'HEESUNG, PARK'
                         Engr Phone                  = ''
                                         DCS File Log                                             'Material Specification' Page Information:
                                         ----------------------------------------
                                         'General' (Lite) Page Information:                       Matl Specification      = 'N/A'
                                                                                                  Matl Description - 1      = ''
                                         Item No             = '95016780'                         Matl Description - 2      = ''
                                         Item Revision           = '001'                          Matl Description - 3      = ''
                                         Item Type             = 'CORP_Part'                      Matl Description - 4      = ''
                                         Context             = 'GEO_FIN001'                       Paint/Coating          = ''
                                         DLS                = ''                                  Paint/Coating - 2       = ''
                                         Release Status           = '2'                           Paint/Coating - 3       = ''
                                         Relation            = ''                                 Paint/Coating - 4       = ''
                                         Item Name               = 'RECEPTACLE ASM-ACSRY PWR'     Part Performance           = ''
                                         Item Description         = 'AVF43757 HVPO BLANK COVER'   Part Performance - 2        = ''
                                         Density             = ''                                 Part Performance - 3        = ''
                                         Volume               = ''                                Part Performance - 4        = ''
ARD# 3.021                               Area               = ''                                  Paint/Coating Perf        = ''
                                         Mass               = ''                                  Paint/Coating Perf - 2 = ''
NOT LIST ON ARD DOCUMENT DATED 12/2/10   Matl Specification       = 'N/A'                         Paint/Coating Perf - 3 = ''
                                         Matl Tolerance           = ''                            Paint/Coating Perf - 4 = ''
                                         Gauge               = 'N/A'                              Appearance to Match            = ''
                                         Usage - UPC              = ''                            Appearance to Match - 2 = ''
                                         VPPS                = '70.02.06.01'                      Appearance to Match - 3 = ''
                                                                                                  Appearance to Match - 4 = ''
                                                                                                  Part Finish          = ''
                                         'Manufacturing' Page Information:                        Part Finish - 2       = ''
                                                                                                  Part Finish - 3       = ''
                                         Tool Identifier      = ''                                Part Finish - 4       = ''
                                         Model              = ''                                  Service Part Reqs          = ''
                                         Program (Lead first)      = ''                           Service Part Reqs - 2       = ''
                                         Model Year             = ''                              Service Part Reqs - 3       = ''
                                         Style             = ''                                   Service Part Reqs - 4       = ''
                                         Using Plants (Lead first) = ''                           Additional Reqs         = ''
                                         Technology             = ''                              Additional Reqs - 2       = ''
                                         Tool Level           = ''                                Additional Reqs - 3       = ''
                                         Manufacturing Type          = ''                         Additional Reqs - 4       = ''
                                                                                                  Material Engineer         = ''
                                                                                                  Appearance Engineer            = ''
                                                                                                  Paint Engineer          = ''


                                                                                                  'Designer Log' Information:



                                                                                                  Work Order "EPNJXB"
                                                                                                  Change Description #1A: "PDI Comments:"


                                                                                                  'Contacts' Page Information:

                                                                                                  Designer                = ''
                                                                                                  Desgnr Phone                 = ''
                                                                                                  Supervisor              = ''
                                                                                                  Suprvsr Phone                = ''
                                                                                                  Engineer                = ''
                                                                                                  Engr Phone                = ''


                                                                                                  'General Notes' Information:
                    DCS File Log                                                 'Designer Log' Information:
                    ----------------------------------------
                    'General' (Lite) Page Information:                           Change Description #1A: "PDI Comments:"

                    Item No             = 'AVF87238'                             'Contacts' Page Information:
                    Item Revision           = '002.0001'
                    Item Type            = 'CORP_Part'                           Designer             = 'JUNGBAE, AN'
                    Context             = 'GEO_FIN001'                           Desgnr Phone            = ''
                    DLS                = ''                                      Supervisor           = 'HEECHANG, WOO'
                    Release Status           = 'X'                               Suprvsr Phone           = ''
                    Relation            = ''                                     Engineer             = 'HEESUNG, PARK'
                    Item Name               = 'CUP HOLDER-LINER_1ST'             Engr Phone            = ''
                    Item Description         = '100712'
                    Density             = '980'                                  'General Notes' Information:
                    Volume               = '0.0000464836'
                    Area               = '0.0477432'                             UNLESS OTHERWISE SPECIFIED:
                    Mass               = '0.0455539'
                    Matl Specification       = 'GMW15812P-TPV-EPDM+PP-TYPE-5E'   ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                    Matl Tolerance          = ''
                    Gauge               = '2'                                    PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                    Usage - UPC              = ''
                    VPPS                = '40.01.03'                             NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

                    'Manufacturing' Page Information:                            TOOL FINISH SHALL MEET OR EXCEED GM7466M

NOT LISTED ON ARD   Tool Identifier       = ''                                   SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                    Model                = ''
                    Program (Lead first)       = ''                              GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                    Model Year              = ''
                    Style              = ''                                      GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                    Using Plants (Lead first) = ''
                    Technology              = ''                                 MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                    Tool Level            = ''                                   TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                    Manufacturing Type           = ''                            FUNCTION

                    'Material Specification' Page Information:                   BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                                 EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                    Matl Specification       = 'GMW15812P-TPV-EPDM+PP-TYPE-5E'
                    Matl Description - 1       = ''                              HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                    Matl Description - 2       = ''                              WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                    Matl Description - 3       = ''
                    Matl Description - 4       = ''                              FOGGING TEST PER GMW3235
                    Paint/Coating           = ''
                    Paint/Coating - 2        = ''                                ODOR TEST PER GMW3205
                    Paint/Coating - 3        = ''
                    Paint/Coating - 4        = ''                                CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                    Part Performance            = ''
                    Part Performance - 2         = ''                            DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                    Part Performance - 3         = ''
                    Part Performance - 4         = ''                            IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                    Paint/Coating Perf         = ''                              THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                    Paint/Coating Perf - 2 = ''                                  TO PART REQUIREMENTS
                    Paint/Coating Perf - 3 = ''
                    Paint/Coating Perf - 4 = ''                                  LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                    Appearance to Match           = ''                           APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                    Appearance to Match - 2 = ''                                 MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                    Appearance to Match - 3 = ''                                 AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                    Appearance to Match - 4 = ''                                 SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                    Part Finish           = ''
                    Part Finish - 2        = ''                                  MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                    Part Finish - 3        = ''                                  OMISSION REQUIRES APPROVAL
                    Part Finish - 4        = ''
                    Service Part Reqs          = ''                              FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                    Service Part Reqs - 2       = ''                             GM9070P AND MUST CONFORM WITH FMVSS 302
                    Service Part Reqs - 3       = ''
                    Service Part Reqs - 4       = ''                             RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                    Additional Reqs          = ''                                GMW3059
                    Additional Reqs - 2        = ''
                    Additional Reqs - 3        = ''
                    Additional Reqs - 4        = ''
                    Material Engineer          = ''
                    Appearance Engineer            = ''
                    Paint Engineer          = ''
E FROM IMPERFECTIONS



T PARTING OR INSERT LINE




S THAN 3.5 DEGREE DRAFT

CH MAY BE DETRIMENTAL



N-APPEARANCE SURFACES




E TESTED AND CERTIFIED



TIFICATION PER ISO 11469
OR DEPRESSED (0.3-0.4 MM

 FUNCTION OR ASSEMBLY




(B4-A) WHEN TESTED PER
                                                      DCS File Log                                           'Designer Log' Information:
                                                      ----------------------------------------
                                                      'General' (Lite) Page Information:                     Change Description #1A: "PDI Comments:"

                                                      Item No                 = 'AVF87239'                   'Contacts' Page Information:
                                                      Item Revision               = '002.0003'
                                                      Item Type                = 'CORP_Part'                 Designer             = 'JUNGBAE, AN'
                                                      Context                 = 'GEO_FIN001'                 Desgnr Phone            = ''
                                                      DLS                    = ''                            Supervisor           = 'HEECHANG, WOO'
                                                      Release Status               = 'X'                     Suprvsr Phone           = ''
                                                      Relation                = ''                           Engineer             = 'HEESUNG, PARK'
                                                      Item Name                   = 'CUP HOLDER-LINER_2ND'   Engr Phone             = ''
                                                      Item Description             = '100712'
                                                      Density                 = '950'                        'General Notes' Information:
                                                      Volume                   = '0.0000947891'
                                                      Area                   = '0.101179'                    UNLESS OTHERWISE SPECIFIED:
                                                      Mass                   = '0.0900496'
                                                      Matl Specification           = 'GMW15816-TYPE-6'       ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                                                      Matl Tolerance               = ''
                                                      Gauge                   = '2'                          PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                                                      Usage - UPC                  = ''
                                                      VPPS                    = '40.01.03'                   NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
ARD # 3.040
                                                      'Manufacturing' Page Information:                      TOOL FINISH SHALL MEET OR EXCEED GM7466M
 Grain type GMGF003 BAHIA / BOTTOM TBD TECHNICAL OR
            DARWIN taken from ARD dated 12/2/10       Tool Identifier       = ''                             SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                                                      Model               = ''
                                                      Program (Lead first)       = ''                        GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                                                      Model Year             = ''
                                                      Style             = ''                                 GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                                                      Using Plants (Lead first) = ''
                                                      Technology             = ''                            MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                                                      Tool Level           = ''                              TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                                                      Manufacturing Type          = ''                       FUNCTION

                                                      'Material Specification' Page Information:             BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                                                             EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                                                      Matl Specification       = 'GMW15816-TYPE-6'
                                                      Matl Description - 1      = ''                         HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                      Matl Description - 2      = ''                         WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                                                      Matl Description - 3      = ''
                                                      Matl Description - 4      = ''                         FOGGING TEST PER GMW3235
                                                      Paint/Coating          = ''
                                                      Paint/Coating - 2       = ''                           ODOR TEST PER GMW3205
                                                      Paint/Coating - 3       = ''
                                                      Paint/Coating - 4       = ''                           CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                                                      Part Performance           = ''
                                                      Part Performance - 2        = ''                       DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                                                      Part Performance - 3        = ''
                                                      Part Performance - 4        = ''                       IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                                                      Paint/Coating Perf        = ''                         THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                                                      Paint/Coating Perf - 2 = ''                            TO PART REQUIREMENTS
                                                      Paint/Coating Perf - 3 = ''
                                                      Paint/Coating Perf - 4 = ''                            LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                                                      Appearance to Match           = ''                     APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                                                      Appearance to Match - 2 = ''                           MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                                                      Appearance to Match - 3 = ''                           AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                                                      Appearance to Match - 4 = ''                           SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                                                      Part Finish          = ''
                                                      Part Finish - 2       = ''                             MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                      Part Finish - 3       = ''                             OMISSION REQUIRES APPROVAL
                                                      Part Finish - 4       = ''
                                                      Service Part Reqs          = ''                        FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                      Service Part Reqs - 2       = ''                       GM9070P AND MUST CONFORM WITH FMVSS 302
                                                      Service Part Reqs - 3       = ''
                                                      Service Part Reqs - 4       = ''                       RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                                                      Additional Reqs         = ''                           GMW3059
                                                      Additional Reqs - 2       = ''
                                                      Additional Reqs - 3       = ''
                                                      Additional Reqs - 4       = ''
                                                      Material Engineer         = ''
                                                      Appearance Engineer            = ''
                                                      Paint Engineer          = ''
                                                                       DCS File Log                                       'Designer Log' Information:
                                                                       ----------------------------------------
                                                                       'General' (Lite) Page Information:                 Change Description #1A: "PDI Comments:"

                                                                       Item No             = 'AVF87241'                   'Contacts' Page Information:
                                                                       Item Revision           = '002.0001'
                                                                       Item Type            = 'CORP_Part'                 Designer             = 'JUNGBAE, AN'
                                                                       Context             = 'GEO_FIN001'                 Desgnr Phone            = ''
                                                                       DLS                = ''                            Supervisor           = 'HEECHANG, WOO'
                                                                       Release Status           = 'X'                     Suprvsr Phone           = ''
                                                                       Relation            = ''                           Engineer             = 'HEESUNG, PARK'
                                                                       Item Name               = 'CUP HOLDER-LINER_3RD'   Engr Phone            = ''
                                                                       Item Description         = '100712'
                                                                       Density             = '950'                        'General Notes' Information:
                                                                       Volume               = '0.0000534636'
                                                                       Area               = '0.0548448'                   UNLESS OTHERWISE SPECIFIED:
                                                                       Mass               = '0.0507905'
                                                                       Matl Specification       = 'GMW15816-TYPE-6'       ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                                                                       Matl Tolerance          = ''
ARD # 3.030                                                            Gauge               = '2'                          PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P

                                                                                                                          NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
Grain type GMGF003 BAHIA / BOTTOM TBD TECHNICAL OR DARWIN taken from
                                                                       'Manufacturing' Page Information:                  TOOL FINISH SHALL MEET OR EXCEED GM7466M
                            ARD dated 12/2/10
                                                                       Tool Identifier       = ''                         SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                                                                       Model                = ''
                                                                       Program (Lead first)       = ''                    GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                                                                       Model Year              = ''
                                                                       Style              = ''                            GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                                                                       Using Plants (Lead first) = ''
                                                                       Technology              = ''                       MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                                                                       Tool Level            = ''                         TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                                                                       Manufacturing Type           = ''                  FUNCTION

                                                                       'Material Specification' Page Information:         BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                                                                          EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                                                                       Matl Specification       = 'GMW15816-TYPE-6'
                                                                       Matl Description - 1       = ''                    HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                                       Matl Description - 2       = ''                    WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                                                                       Matl Description - 3       = ''
                                                                       Matl Description - 4       = ''                    FOGGING TEST PER GMW3235
                                                                       Paint/Coating           = ''
                                                                       Paint/Coating - 2        = ''                      ODOR TEST PER GMW3205
                                                                       Paint/Coating - 3        = ''
                                                                       Paint/Coating - 4        = ''                      CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                                                                       Part Performance            = ''
                                                                       Part Performance - 2         = ''                  DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                                                                       Part Performance - 3         = ''
                                                                       Part Performance - 4         = ''                  IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                                                                       Paint/Coating Perf         = ''                    THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                                                                       Paint/Coating Perf - 2 = ''                        TO PART REQUIREMENTS
                                                                       Paint/Coating Perf - 3 = ''
                                                                       Paint/Coating Perf - 4 = ''                        LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                                                                       Appearance to Match           = ''                 APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                                                                       Appearance to Match - 2 = ''                       MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                                                                       Appearance to Match - 3 = ''                       AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                                                                       Appearance to Match - 4 = ''                       SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                                                                       Part Finish           = ''
                                                                       Part Finish - 2        = ''                        MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                                                                       Part Finish - 3        = ''                        OMISSION REQUIRES APPROVAL
                                                                       Part Finish - 4        = ''
                                                                       Service Part Reqs          = ''                    FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                                                                       Service Part Reqs - 2       = ''                   GM9070P AND MUST CONFORM WITH FMVSS 302
                                                                       Service Part Reqs - 3       = ''
                                                                       Service Part Reqs - 4       = ''                   RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                                                                       Additional Reqs          = ''                      GMW3059
                                                                       Additional Reqs - 2        = ''
                                                                       Additional Reqs - 3        = ''
                                                                       Additional Reqs - 4        = ''
                                                                       Material Engineer          = ''
                                                                       Appearance Engineer            = ''
                                                                       Paint Engineer          = ''
                         DCS File Log                                                'Designer Log' Information:
                         ----------------------------------------
                         'General' (Lite) Page Information:                          Change Description #1A: "PDI Comments:"

                         Item No                = 'AVF87251'                         'Contacts' Page Information:
                         Item Revision              = '002.0001'
                         Item Type                = 'CORP_Part'                      Designer            = 'JUNGBAE, AN'
                         Context                = 'GEO_FIN001'                       Desgnr Phone            = ''
                         DLS                   = ''                                  Supervisor          = 'HEECHANG, WOO'
                         Release Status              = 'X'                           Suprvsr Phone          = ''
                         Relation               = ''                                 Engineer            = 'HEESUNG, PARK'
                         Item Name                  = 'INSERT-F/FLR CNSL CUP HLDR'   Engr Phone            = ''
                         Item Description            = '100712'
                         Density                = '1010'                             'General Notes' Information:
                         Volume                  = '0.0000237928'
                         Area                  = '0.0208763'                         UNLESS OTHERWISE SPECIFIED:
                         Mass                  = '0.0240307'
        N/A              Matl Specification          = 'GMW15548'                    ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                         Matl Tolerance              = ''
PART NOT LISTED ON ARD   Gauge                  = 'N/A'                              PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
PART NOT GRAINED         Usage - UPC                 = ''
                         VPPS                   = '40.01.03'                         NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

                         'Manufacturing' Page Information:                           TOOL FINISH SHALL MEET OR EXCEED GM7466M

                         Tool Identifier       = ''                                  SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                         Model              = ''
                         Program (Lead first)       = ''                             GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                         Model Year             = ''
                         Style             = ''                                      GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                         Using Plants (Lead first) = ''
                         Technology             = ''                                 MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                         Tool Level           = ''                                   TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                         Manufacturing Type          = ''                            FUNCTION

                         'Material Specification' Page Information:                  BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                                     EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                         Matl Specification       = 'GMW15548'
                         Matl Description - 1      = ''                              HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                         Matl Description - 2      = ''                              WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                         Matl Description - 3      = ''
                         Matl Description - 4      = ''                              FOGGING TEST PER GMW3235
                         Paint/Coating          = ''
                         Paint/Coating - 2       = ''                                ODOR TEST PER GMW3205
                         Paint/Coating - 3       = ''
                         Paint/Coating - 4       = ''                                CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                         Part Performance           = ''
                         Part Performance - 2        = ''                            DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                         Part Performance - 3        = ''
                         Part Performance - 4        = ''                            IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                         Paint/Coating Perf        = ''                              THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                         Paint/Coating Perf - 2 = ''                                 TO PART REQUIREMENTS
                         Paint/Coating Perf - 3 = ''
                         Paint/Coating Perf - 4 = ''                                 LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                         Appearance to Match           = ''                          APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                         Appearance to Match - 2 = ''                                MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                         Appearance to Match - 3 = ''                                AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                         Appearance to Match - 4 = ''                                SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                         Part Finish          = ''
                         Part Finish - 2       = ''                                  MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                         Part Finish - 3       = ''                                  OMISSION REQUIRES APPROVAL
                         Part Finish - 4       = ''
                         Service Part Reqs          = ''                             FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                         Service Part Reqs - 2       = ''                            GM9070P AND MUST CONFORM WITH FMVSS 302
                         Service Part Reqs - 3       = ''
                         Service Part Reqs - 4       = ''                            RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                         Additional Reqs          = ''                               GMW3059
                         Additional Reqs - 2       = ''
                         Additional Reqs - 3       = ''
                         Additional Reqs - 4       = ''
                         Material Engineer         = ''
                         Appearance Engineer            = ''
                         Paint Engineer          = ''
                 DCS File Log                                      'Designer Log' Information:
                 ----------------------------------------
                 'General' (Lite) Page Information:                Change Description #1A: "PDI Comments:"

                 Item No                = 'AVF87255'               'Contacts' Page Information:
                 Item Revision              = '002.0004'
                 Item Type                = 'CORP_Part'            Designer            = 'JUNGBAE, AN'
                 Context                = 'GEO_FIN001'             Desgnr Phone            = ''
                 DLS                   = ''                        Supervisor          = 'HEECHANG, WOO'
                 Release Status              = 'X'                 Suprvsr Phone          = ''
                 Relation               = ''                       Engineer            = 'HEESUNG, PARK'
                 Item Name                  = 'COVER-F/FLR CNSL'   Engr Phone            = ''
                 Item Description            = '100712'
                 Density                = '1010'                   'General Notes' Information:
                 Volume                  = '0.000192181'
                 Area                  = '0.15561'                 UNLESS OTHERWISE SPECIFIED:
                 Mass                  = '0.194102'
                 Matl Specification          = 'GMW15548'          ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                 Matl Tolerance              = ''
                 Gauge                  = '3'                      PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                 Usage - UPC                 = ''
                 VPPS                   = '40.01.03'               NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
                 Gauge                  = '3'
                 Usage - UPC                 = ''                  TOOL FINISH SHALL MEET OR EXCEED GM7466M
                 VPPS                   = '40.01.03'
                                                                   SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                 'Manufacturing' Page Information:
                                                                   GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                 Tool Identifier       = ''
                 Model              = ''                           GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                 Program (Lead first)       = ''
                 Model Year             = ''                       MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                 Style             = ''                            TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                 Using Plants (Lead first) = ''                    FUNCTION
ARD # 3.060      Technology             = ''
                 Tool Level           = ''                         BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
GMGA001 DARWIN   Manufacturing Type          = ''                  EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL

                 'Material Specification' Page Information:        HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                                                                   WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                 Matl Specification       = 'GMW15548'
                 Matl Description - 1      = ''                    FOGGING TEST PER GMW3235
                 Matl Description - 2      = ''
                 Matl Description - 3      = ''                    ODOR TEST PER GMW3205
                 Matl Description - 4      = ''
                 Paint/Coating          = ''                       CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                 Paint/Coating - 2       = ''
                 Paint/Coating - 3       = ''                      DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                 Paint/Coating - 4       = ''
                 Part Performance           = ''                   IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                 Part Performance - 2        = ''                  THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                 Part Performance - 3        = ''                  TO PART REQUIREMENTS
                 Part Performance - 4        = ''
                 Paint/Coating Perf        = ''                    LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                 Paint/Coating Perf - 2 = ''                       APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                 Paint/Coating Perf - 3 = ''                       MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                 Paint/Coating Perf - 4 = ''                       AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                 Appearance to Match           = ''                SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                 Appearance to Match - 2 = ''
                 Appearance to Match - 3 = ''                      MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                 Appearance to Match - 4 = ''                      OMISSION REQUIRES APPROVAL
                 Part Finish          = ''
                 Part Finish - 2       = ''                        FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                 Part Finish - 3       = ''                        GM9070P AND MUST CONFORM WITH FMVSS 302
                 Part Finish - 4       = ''
                 Service Part Reqs          = ''                   RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                 Service Part Reqs - 2       = ''                  GMW3059
                 Service Part Reqs - 3       = ''
                 Service Part Reqs - 4       = ''
                 Additional Reqs          = ''
                 Additional Reqs - 2       = ''
                 Additional Reqs - 3       = ''
                 Additional Reqs - 4       = ''
                 Material Engineer         = ''
                 Appearance Engineer            = ''
                 Paint Engineer          = ''
            DCS File Log                                   'Designer Log' Information:
            ----------------------------------------
            'General' (Lite) Page Information:             Change Description #1A: "PDI Comments:"

            Item No             = 'AVF87257'               'Contacts' Page Information:
            Item Revision           = '002.0004'
            Item Type            = 'CORP_Part'             Designer             = 'JUNGBAE, AN'
            Context             = 'GEO_FIN001'             Desgnr Phone            = ''
            DLS                = ''                        Supervisor           = 'HEECHANG, WOO'
            Release Status           = 'X'                 Suprvsr Phone           = ''
            Relation            = ''                       Engineer             = 'HEESUNG, PARK'
            Item Name               = 'DECORATION COVER'   Engr Phone            = ''
            Item Description         = '100712'
            Density             = '1040'                   'General Notes' Information:
            Volume               = '0.0000423885'
            Area               = '0.0417243'               UNLESS OTHERWISE SPECIFIED:
            Mass               = '0.0440841'
            Matl Specification       = 'GMP.ABS.007'       ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
            Matl Tolerance           = ''
            Gauge               = '2.5'                    PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
ARD 3.063   Usage - UPC              = ''
            VPPS                = '40.01.03'               NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
GMSF001
            'Manufacturing' Page Information:              TOOL FINISH SHALL MEET OR EXCEED GM7466M

            Tool Identifier      = ''                      SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
            Model               = ''
            Program (Lead first)      = ''                 GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
            Model Year             = ''
            Style             = ''                         GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
            Using Plants (Lead first) = ''
            Technology             = ''                    MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
            Tool Level           = ''                      TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
            Manufacturing Type          = ''               FUNCTION

            'Material Specification' Page Information:     BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                           EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
            Matl Specification       = 'GMP.ABS.007'
            Matl Description - 1      = ''                 HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
            Matl Description - 2      = ''                 WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
            Matl Description - 3      = ''
            Matl Description - 4      = ''                 FOGGING TEST PER GMW3235
            Paint/Coating          = ''
            Paint/Coating - 2       = ''                   ODOR TEST PER GMW3205
            Paint/Coating - 3       = ''
            Paint/Coating - 4       = ''                   CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
            Part Performance           = ''
            Part Performance - 2        = ''               DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
            Part Performance - 3        = ''
            Part Performance - 4        = ''               IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
            Paint/Coating Perf        = ''                 THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
            Paint/Coating Perf - 2 = ''                    TO PART REQUIREMENTS
            Paint/Coating Perf - 3 = ''
            Paint/Coating Perf - 4 = ''                    LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
            Appearance to Match           = ''             APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
            Appearance to Match - 2 = ''                   MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
            Appearance to Match - 3 = ''                   AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
            Appearance to Match - 4 = ''                   SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
            Part Finish          = ''
            Part Finish - 2       = ''                     MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
            Part Finish - 3       = ''                     OMISSION REQUIRES APPROVAL
            Part Finish - 4       = ''
            Service Part Reqs          = ''                FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
            Service Part Reqs - 2       = ''               GM9070P AND MUST CONFORM WITH FMVSS 302
            Service Part Reqs - 3       = ''
            Service Part Reqs - 4       = ''               RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
            Additional Reqs         = ''                   GMW3059
            Additional Reqs - 2       = ''
            Additional Reqs - 3       = ''
            Additional Reqs - 4       = ''
            Material Engineer         = ''
            Appearance Engineer            = ''
            Paint Engineer         = ''
                 DCS File Log                                 'Designer Log' Information:
                 ----------------------------------------
                 Item No                     = 'AVF87258'     Change Description #1A: "PDI Comments:"

                 'General' (Lite) Page Information:           'Contacts' Page Information:

                 Item Revision           = '002.0004'         Designer             = 'JUNGBAE, AN'
                 Item Type            = 'CORP_Part'           Desgnr Phone            = ''
                 Context             = 'GEO_FIN001'           Supervisor           = 'HEECHANG, WOO'
                 DLS                = ''                      Suprvsr Phone           = ''
                 Release Status           = 'X'               Engineer             = 'HEESUNG, PARK'
                 Relation            = ''                     Engr Phone             = ''
                 Item Name              = 'FRONT-BIN'
                 Item Description         = '100712'          'General Notes' Information:
                 Density             = '1010'
ARD # 3.061      Volume               = '0.000124003'         UNLESS OTHERWISE SPECIFIED:
                 Area               = '0.0910135'
GMGA001 DARWIN   Mass               = '0.125243'              ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                 Matl Specification       = 'GMW15548'
                 Matl Tolerance          = ''                 PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                 Gauge               = '3'
                 Usage - UPC              = ''                NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE
                 VPPS                = '40.01.03'
                                                              TOOL FINISH SHALL MEET OR EXCEED GM7466M
                 'Manufacturing' Page Information:
                                                              SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                 Tool Identifier       = ''
                 Model               = ''                     GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                 Program (Lead first)       = ''
                 Model Year             = ''                  GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                 Style             = ''
                 Using Plants (Lead first) = ''               MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                 Technology             = ''                  TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                 Tool Level           = ''                    FUNCTION
                 Manufacturing Type          = ''
                                                              BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                 'Material Specification' Page Information:   EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL

                 Matl Specification      = 'GMW15548'         HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                 Matl Description - 1      = ''               WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                 Matl Description - 2      = ''
                 Matl Description - 3      = ''               FOGGING TEST PER GMW3235
                 Matl Description - 4      = ''
                 Paint/Coating          = ''                  ODOR TEST PER GMW3205
                 Paint/Coating - 2       = ''
                 Paint/Coating - 3       = ''                 CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                 Paint/Coating - 4       = ''
                 Part Performance           = ''              DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                 Part Performance - 2        = ''
                 Part Performance - 3        = ''             IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                 Part Performance - 4        = ''             THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                 Paint/Coating Perf        = ''               TO PART REQUIREMENTS
                 Paint/Coating Perf - 2 = ''
                 Paint/Coating Perf - 3 = ''                  LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                 Paint/Coating Perf - 4 = ''                  APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                 Appearance to Match           = ''           MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                 Appearance to Match - 2 = ''                 AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                 Appearance to Match - 3 = ''                 SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                 Appearance to Match - 4 = ''
                 Part Finish          = ''                    MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                 Part Finish - 2       = ''                   OMISSION REQUIRES APPROVAL
                 Part Finish - 3       = ''
                 Part Finish - 4       = ''                   FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                 Service Part Reqs          = ''              GM9070P AND MUST CONFORM WITH FMVSS 302
                 Service Part Reqs - 2       = ''
                 Service Part Reqs - 3       = ''             RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                 Service Part Reqs - 4       = ''             GMW3059
                 Additional Reqs         = ''
                 Additional Reqs - 2       = ''
                 Additional Reqs - 3       = ''
                 Additional Reqs - 4       = ''
                 Material Engineer         = ''
                 Appearance Engineer            = ''
                 Paint Engineer          = ''
                        DCS File Log                                      'Designer Log' Information:
                        ----------------------------------------
                        'General' (Lite) Page Information:                Change Description #1A: "PDI Comments:"

                        Item No                = 'AVF87259'               'Contacts' Page Information:
                        Item Revision              = '002.0003'
                        Item Type                = 'CORP_Part'            Designer            = 'JUNGBAE, AN'
                        Context                = 'GEO_FIN001'             Desgnr Phone            = ''
                        DLS                   = ''                        Supervisor          = 'HEECHANG, WOO'
                        Release Status              = 'X'                 Suprvsr Phone          = ''
                        Relation               = ''                       Engineer            = 'HEESUNG, PARK'
                        Item Name                  = 'FRONT BIN-MAT'      Engr Phone            = ''
                        Item Description            = '100712'
                        Density                = '950'                    'General Notes' Information:
                        Volume                  = '0.0000203631'
                        Area                  = '0.0210865'               UNLESS OTHERWISE SPECIFIED:
                        Mass                  = '0.0193449'
                        Matl Specification          = 'GMW15816-TYPE-6'   ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
                        Matl Tolerance              = ''
                        Gauge                  = '2'                      PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
                        Usage - UPC                 = ''
ARD# 3.062              VPPS                   = '40.01.03'               NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

GRAIN TBD (TECHNICAL)   'Manufacturing' Page Information:                 TOOL FINISH SHALL MEET OR EXCEED GM7466M

                        Tool Identifier       = ''                        SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
                        Model              = ''
                        Program (Lead first)       = ''                   GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
                        Model Year             = ''
                        Style             = ''                            GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
                        Using Plants (Lead first) = ''
                        Technology             = ''                       MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
                        Tool Level           = ''                         TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
                        Manufacturing Type          = ''                  FUNCTION

                        'Material Specification' Page Information:        BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                          EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
                        Matl Specification       = 'GMW15816-TYPE-6'
                        Matl Description - 1      = ''                    HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
                        Matl Description - 2      = ''                    WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
                        Matl Description - 3      = ''
                        Matl Description - 4      = ''                    FOGGING TEST PER GMW3235
                        Paint/Coating          = ''
                        Paint/Coating - 2       = ''                      ODOR TEST PER GMW3205
                        Paint/Coating - 3       = ''
                        Paint/Coating - 4       = ''                      CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
                        Part Performance           = ''
                        Part Performance - 2        = ''                  DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
                        Part Performance - 3        = ''
                        Part Performance - 4        = ''                  IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
                        Paint/Coating Perf        = ''                    THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
                        Paint/Coating Perf - 2 = ''                       TO PART REQUIREMENTS
                        Paint/Coating Perf - 3 = ''
                        Paint/Coating Perf - 4 = ''                       LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
                        Appearance to Match           = ''                APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
                        Appearance to Match - 2 = ''                      MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
                        Appearance to Match - 3 = ''                      AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
                        Appearance to Match - 4 = ''                      SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
                        Part Finish          = ''
                        Part Finish - 2       = ''                        MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
                        Part Finish - 3       = ''                        OMISSION REQUIRES APPROVAL
                        Part Finish - 4       = ''
                        Service Part Reqs          = ''                   FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
                        Service Part Reqs - 2       = ''                  GM9070P AND MUST CONFORM WITH FMVSS 302
                        Service Part Reqs - 3       = ''
                        Service Part Reqs - 4       = ''                  RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
                        Additional Reqs          = ''                     GMW3059
                        Additional Reqs - 2       = ''
                        Additional Reqs - 3       = ''
                        Additional Reqs - 4       = ''
                        Material Engineer         = ''
                        Appearance Engineer            = ''
                        Paint Engineer          = ''
             DCS File Log                                         'Designer Log' Information:
             ----------------------------------------
             'General' (Lite) Page Information:                   Change Description #1A: "PDI Comments:"

             Item No             = 'AVK34932'                     'Contacts' Page Information:
             Item Revision           = '002.0001'
             Item Type            = 'CORP_Part'                   Designer             = 'JUNGBAE, AN'
             Context             = 'GEO_FIN001'                   Desgnr Phone            = ''
             DLS                = ''                              Supervisor           = 'HEECHANG, WOO'
             Release Status           = 'X'                       Suprvsr Phone           = ''
             Relation            = ''                             Engineer             = 'HEESUNG, PARK'
             Item Name               = 'CAP-F/FLR CNSL BOLT-LH'   Engr Phone            = ''
             Item Description         = '101020'
             Density             = '1010'                         'General Notes' Information:
             Volume               = '0.00000253863'
             Area               = '0.00322445'                    UNLESS OTHERWISE SPECIFIED:
             Mass               = '0.00256402'
             Matl Specification       = 'GMW15548'                ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
             Matl Tolerance           = ''
Not On ARD   Gauge               = 'N/A'                          PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
             Usage - UPC              = ''
             VPPS                = '40.01.03'                     NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

             'Manufacturing' Page Information:                    TOOL FINISH SHALL MEET OR EXCEED GM7466M

             Tool Identifier      = ''                            SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT
             Model               = ''
             Program (Lead first)      = ''                       GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
             Model Year             = ''
             Style             = ''                               GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
             Using Plants (Lead first) = ''
             Technology             = ''                          MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
             Tool Level           = ''                            TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
             Manufacturing Type          = ''                     FUNCTION

             'Material Specification' Page Information:           BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                  EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
             Matl Specification       = 'GMW15548'
             Matl Description - 1      = ''                       HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
             Matl Description - 2      = ''                       WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
             Matl Description - 3      = ''
             Matl Description - 4      = ''                       FOGGING TEST PER GMW3235
             Paint/Coating          = ''
             Paint/Coating - 2       = ''                         ODOR TEST PER GMW3205
             Paint/Coating - 3       = ''
             Paint/Coating - 4       = ''                         CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
             Part Performance           = ''
             Part Performance - 2        = ''                     DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
             Part Performance - 3        = ''
             Part Performance - 4        = ''                     IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
             Paint/Coating Perf        = ''                       THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
             Paint/Coating Perf - 2 = ''                          TO PART REQUIREMENTS
             Paint/Coating Perf - 3 = ''
             Paint/Coating Perf - 4 = ''                          LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
             Appearance to Match           = ''                   APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
             Appearance to Match - 2 = ''                         MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
             Appearance to Match - 3 = ''                         AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
             Appearance to Match - 4 = ''                         SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
             Part Finish          = ''
             Part Finish - 2       = ''                           MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
             Part Finish - 3       = ''                           OMISSION REQUIRES APPROVAL
             Part Finish - 4       = ''
             Service Part Reqs          = ''                      FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
             Service Part Reqs - 2       = ''                     GM9070P AND MUST CONFORM WITH FMVSS 302
             Service Part Reqs - 3       = ''
             Service Part Reqs - 4       = ''                     RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
             Additional Reqs         = ''                         GMW3059
             Additional Reqs - 2       = ''
             Additional Reqs - 3       = ''
             Additional Reqs - 4       = ''
             Material Engineer         = ''
             Appearance Engineer            = ''
             Paint Engineer         = ''
             DCS File Log                                         'Designer Log' Information:
             ----------------------------------------
             'General' (Lite) Page Information:                   Change Description #1A: "PDI Comments:"

             Item No             = 'AVK34934'                     'Contacts' Page Information:
             Item Revision           = '002.0001'
             Item Type            = 'CORP_Part'                   Designer             = 'JUNGBAE, AN'
             Context             = 'GEO_FIN001'                   Desgnr Phone            = ''
             DLS                = ''                              Supervisor            = 'HEECHANG, WOO'
             Release Status           = 'X'                       Suprvsr Phone           = ''
             Relation            = ''                             Engineer             = 'HEESUNG, PARK'
             Item Name               = 'CAP-F/FLR CNSL BOLT-RH'   Engr Phone             = ''
             Item Description         = '101020'                  'General Notes' Information:
             Density             = '1010'
             Volume               = '0.00000253853'               UNLESS OTHERWISE SPECIFIED:
             Area               = '0.00322446'
Not On ADR   Mass               = '0.00256392'                    ALL EXPOSED SURFACE FINISH MUST BE FREE FROM IMPERFECTIONS
             Matl Specification       = 'GMW15548'
             Matl Tolerance          = ''                         PARTING LINES ON ALL EXPOSED SURFACES MUST MEET GM9684P
             Gauge               = 'N/A'
             Usage - UPC              = ''                        NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

             VPPS                     = '40.01.03'                TOOL FINISH SHALL MEET OR EXCEED GM7466M

             'Manufacturing' Page Information:                    SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DRAFT

             Tool Identifier       = ''                           GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRAFT
             Model                = ''
             Program (Lead first)       = ''                      GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT
             Model Year              = ''
             Style              = ''                              MUST BE FREE OF BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
             Using Plants (Lead first) = ''                       TO SATISFACTORY ASSEMBLY, SAFE HANDLING, APPEARANCE OR
             Technology              = ''                         FUNCTION
             Tool Level            = ''
             Manufacturing Type           = ''                    BODY GRID LINES TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
                                                                  EVERY 100 MM. OMISSION REQUIRES ENGINERING APPROVAL
             'Material Specification' Page Information:
                                                                  HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N WHEN APPLIED
             Matl Specification       = 'GMW15548'                WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATSTAKE
             Matl Description - 1       = ''
             Matl Description - 2       = ''                      FOGGING TEST PER GMW3235
             Matl Description - 3       = ''
             Matl Description - 4       = ''                      ODOR TEST PER GMW3205
             Paint/Coating           = ''
             Paint/Coating - 2        = ''                        CHEMICAL RESISTANCE OF THERMOPLASTICS PER GM9900P
             Paint/Coating - 3        = ''
             Paint/Coating - 4        = ''                        DURABILTY OF PRINTED GRAPHIC TO MEET GMN10083
             Part Performance            = ''
             Part Performance - 2         = ''                    IF REGRIND MATERIAL IS USED IN PRODUCTION, A PART MADE FROM
             Part Performance - 3         = ''                    THE MAXIMUM AMOUNT OF REGRIND MUST BE TESTED AND CERTIFIED
             Part Performance - 4         = ''                    TO PART REQUIREMENTS
             Paint/Coating Perf         = ''
             Paint/Coating Perf - 2 = ''                          LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
             Paint/Coating Perf - 3 = ''                          APPLICABLE) AND PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
             Paint/Coating Perf - 4 = ''                          MUST APPEAR ON INSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
             Appearance to Match           = ''                   AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLESS OTHERWISE
             Appearance to Match - 2 = ''                         SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY
             Appearance to Match - 3 = ''
             Appearance to Match - 4 = ''                         MANUFACTURER'S IDENTIFICATION MUST APPEAR ON THIS PART,
             Part Finish           = ''                           OMISSION REQUIRES APPROVAL
             Part Finish - 2        = ''
             Part Finish - 3        = ''                          FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
             Part Finish - 4        = ''                          GM9070P AND MUST CONFORM WITH FMVSS 302
             Service Part Reqs           = ''
             Service Part Reqs - 2        = ''                    RESTRICTED AND REPORTABLE SUBSTANCES FOR PARTS PER
             Service Part Reqs - 3        = ''                    GMW3059
             Service Part Reqs - 4        = ''
             Additional Reqs          = ''
             Additional Reqs - 2        = ''
             Additional Reqs - 3        = ''
             Additional Reqs - 4        = ''
             Material Engineer          = ''
             Appearance Engineer             = ''
             Paint Engineer          = ''
             DCS File Log
             ----------------------------------------
             'General' (Lite) Page Information:

             Item No             = 'AVF87550'
             Item Revision           = '002.0002'
             Item Type             = 'CORP_Par
             Context             = 'GEO_FIN00
             DLS                = ''
             Release Status           = 'X'
             Relation            = ''
             Item Name               = 'SUPPORT
             Item Description         = '100712'
             Density             = '7840'
             Volume               = '0.00001678
             Area               = '0.0234484'
             Mass               = '0.131557'
             Matl Specification       = 'GMW2M
             Matl Tolerance           = ''
             Gauge               = '1.5'
             Usage - UPC              = ''
             VPPS                = '30.01.03'

             'Manufacturing' Page Information:

             Tool Identifier       = ''
             Model               = ''
Not On ADR   Program (Lead first)       = ''
             Model Year             = ''
             Style             = ''
             Using Plants (Lead first) = ''
             Technology             = ''
             Tool Level           = ''
             Manufacturing Type          = ''

             'Material Specification' Page Inform

             Matl Specification         = 'GMW2M
             Matl Description - 1        = ''
             Matl Description - 2        = ''
             Matl Description - 3        = ''
             Matl Description - 4        = ''
             Paint/Coating             = ''
             Paint/Coating - 2          = ''
             Paint/Coating - 3          = ''
             Paint/Coating - 4          = ''
             Part Performance             = ''
             Part Performance - 2           = ''
             Part Performance - 3           = ''
             Part Performance - 4           = ''
             Paint/Coating Perf          = ''
Paint/Coating Perf - 2 = ''
Paint/Coating Perf - 3 = ''
Paint/Coating Perf - 4 = ''
Appearance to Match          = ''
Appearance to Match - 2 = ''
Appearance to Match - 3 = ''
Appearance to Match - 4 = ''
Part Finish          = ''
Part Finish - 2       = ''
Part Finish - 3       = ''
Part Finish - 4       = ''
Service Part Reqs          = ''
Service Part Reqs - 2       = ''
Service Part Reqs - 3       = ''
Service Part Reqs - 4       = ''
Additional Reqs         = ''
Additional Reqs - 2       = ''
Additional Reqs - 3       = ''
Additional Reqs - 4       = ''
Material Engineer         = ''
Appearance Engineer            = ''
Paint Engineer         = ''
DCS File Log                                               'Designer Log' Information:
----------------------------------------
'General' (Lite) Page Information:                         Change Description #1A: "PDI Comments:"

Item No             = 'AVF87550'                           'Contacts' Page Information:
Item Revision           = '002.0002'
Item Type             = 'CORP_Part'                        Designer            = 'JUNGBAE, AN'
Context             = 'GEO_FIN001'                         Desgnr Phone           = ''
DLS                = ''                                    Supervisor          = 'HEECHANG, WOO'
Release Status           = 'X'                             Suprvsr Phone          = ''
Relation            = ''                                   Engineer            = 'HEESUNG, PARK'
Item Name               = 'SUPPORT-F/FLR CNSL RR'          Engr Phone            = ''
Item Description         = '100712'
Density             = '7840'
Volume               = '0.0000167802'                      'General Notes' Information:
Area               = '0.0234484'
Mass               = '0.131557'                            UNLESS OTHERWISE SPECIFIED:
Matl Specification       = 'GMW2M-ST-S-CR3-HD60G60G-U'
Matl Tolerance           = ''                              ALL EXPOSED SURFACE FINISH MUST BE FREE FRO
Gauge               = '1.5'
Usage - UPC              = ''                              PARTING LINES ON ALL EXPOSED SURFACES MUST
VPPS                = '30.01.03'
                                                           NO MORE THAN 0.3 MM FLASH ALLOWABLE AT PART
'Manufacturing' Page Information:
                                                           TOOL FINISH SHALL MEET OR EXCEED GM7466M
Tool Identifier       = ''
Model               = ''                                   SMOOTH SURFACES TO BE 1.5 DEGREE MINIMUM DR
Program (Lead first)       = ''
Model Year             = ''                                GRAIN SURFACES TO BE 7.0 DEGREE MINIMUM DRA
Style             = ''
Using Plants (Lead first) = ''                             GRAIN WASHOUT PERMISSIBLE IN AREAS LESS THA
Technology             = ''
Tool Level           = ''                                  MUST BE FREE OF BURRS OR FLASHING WHICH MA
Manufacturing Type          = ''                           TO SATISFACTORY ASSEMBLY, SAFE HANDLING, AP
                                                           FUNCTION
'Material Specification' Page Information:
                                                           BODY GRID LINES TO BE PUT IN TOOL ON NON-APPE
Matl Specification         = 'GMW2M-ST-S-CR3-HD60G60G-U'   EVERY 100 MM. OMISSION REQUIRES ENGINERING A
Matl Description - 1        = ''
Matl Description - 2        = ''                           HEAT-STAKES MUST WITHSTAND A FORCE OF 20 N
Matl Description - 3        = ''                           WITHIN A DIAMETER OF 25.0 MM NORMAL TO HEATS
Matl Description - 4        = ''
Paint/Coating             = ''                             FOGGING TEST PER GMW3235
Paint/Coating - 2          = ''
Paint/Coating - 3          = ''                            ODOR TEST PER GMW3205
Paint/Coating - 4          = ''
Part Performance             = ''                          CHEMICAL RESISTANCE OF THERMOPLASTICS PER
Part Performance - 2           = ''
Part Performance - 3           = ''                        DURABILTY OF PRINTED GRAPHIC TO MEET GMN100
Part Performance - 4           = ''
Paint/Coating Perf          = ''                           IF REGRIND MATERIAL IS USED IN PRODUCTION, A P
Paint/Coating Perf - 2 = ''           THE MAXIMUM AMOUNT OF REGRIND MUST BE TEST
Paint/Coating Perf - 3 = ''           TO PART REQUIREMENTS
Paint/Coating Perf - 4 = ''
Appearance to Match          = ''     LEGIBLE PART NUMBER, (APPROPRIATE LETTER 'LH
Appearance to Match - 2 = ''          APPLICABLE) AND PLASTIC COMPOUND IDENTIFICAT
Appearance to Match - 3 = ''          MUST APPEAR ON INSIDE SURFACE, RAISED OR DEP
Appearance to Match - 4 = ''          AND 12MM MIN HIGH), IN LOCATION SHOWN, UNLES
Part Finish          = ''             SPECIFIED. MUST NOT AFFECT APPEARANCE, FUNC
Part Finish - 2       = ''
Part Finish - 3       = ''            MANUFACTURER'S IDENTIFICATION MUST APPEAR O
Part Finish - 4       = ''            OMISSION REQUIRES APPROVAL
Service Part Reqs          = ''
Service Part Reqs - 2       = ''      FLAMMABILITY SHALL NOT EXCEED GM6090M (B4-A)
Service Part Reqs - 3       = ''      GM9070P AND MUST CONFORM WITH FMVSS 302
Service Part Reqs - 4       = ''
Additional Reqs         = ''          RESTRICTED AND REPORTABLE SUBSTANCES FOR
Additional Reqs - 2       = ''        GMW3059
Additional Reqs - 3       = ''
Additional Reqs - 4       = ''
Material Engineer         = ''
Appearance Engineer            = ''
Paint Engineer         = ''
#1A: "PDI Comments:"



= 'JUNGBAE, AN'

 = 'HEECHANG, WOO'

= 'HEESUNG, PARK'




SE SPECIFIED:

FACE FINISH MUST BE FREE FROM IMPERFECTIONS

 ALL EXPOSED SURFACES MUST MEET GM9684P

 MM FLASH ALLOWABLE AT PARTING OR INSERT LINE

L MEET OR EXCEED GM7466M

 S TO BE 1.5 DEGREE MINIMUM DRAFT

TO BE 7.0 DEGREE MINIMUM DRAFT

PERMISSIBLE IN AREAS LESS THAN 3.5 DEGREE DRAFT

BURRS OR FLASHING WHICH MAY BE DETRIMENTAL
ASSEMBLY, SAFE HANDLING, APPEARANCE OR


TO BE PUT IN TOOL ON NON-APPEARANCE SURFACES
 ISSION REQUIRES ENGINERING APPROVAL

T WITHSTAND A FORCE OF 20 N WHEN APPLIED
R OF 25.0 MM NORMAL TO HEATSTAKE

R GMW3235



ANCE OF THERMOPLASTICS PER GM9900P

NTED GRAPHIC TO MEET GMN10083

RIAL IS USED IN PRODUCTION, A PART MADE FROM
OUNT OF REGRIND MUST BE TESTED AND CERTIFIED


MBER, (APPROPRIATE LETTER 'LH' OR 'RH' IF
PLASTIC COMPOUND IDENTIFICATION PER ISO 11469
 NSIDE SURFACE, RAISED OR DEPRESSED (0.3-0.4 MM
 H), IN LOCATION SHOWN, UNLESS OTHERWISE
NOT AFFECT APPEARANCE, FUNCTION OR ASSEMBLY

 IDENTIFICATION MUST APPEAR ON THIS PART,
ES APPROVAL

LL NOT EXCEED GM6090M (B4-A) WHEN TESTED PER
T CONFORM WITH FMVSS 302

REPORTABLE SUBSTANCES FOR PARTS PER

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:985
posted:10/6/2011
language:English
pages:25