Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

Erros_20Adabas.doc by xiaohuicaicai

VIEWS: 0 PAGES: 14

									 /*------------------------------------------------------------------*/
 /*                                                                  */
 /* MENSAGENS DE ERRO - ADABAS                                        */
 /*                                                                   */
 /*------------------------------------------------------------------*/
           000 Successful command processing.
           001 An isn list could not be sorted because of an excessive number of
               resulting isns or, the ISN quantity returned does not correspond
               with the actual number of records found (possible only if securit
               by value is being used).
           002 Isn não pode ser holdado devido 'a falta de espaço na hold-queue.
           003 Foi encontrada a condição de end-of-file ou end-of-list
           004 A C2 or C3 command was issued and neither the minimum number of
               commands nor the minimum elapsed time between synchronized
               checkpoints had been reached.
           005 Notification that a synchronous checkpoint is about to be taken.
           009 The last user transaction has been backed out by ADABAS (ET logic
               user only) or, a cluster backout has occurred and the cluster is
               now locked (file cluster user only). The cluster will not be
               unlocked until all users of the cluster are cancelled
               exclusive control user (NON-ET user) exceeded the non-activity
               time limit. The user no longer has exclusive control of the file.
               Programa com opcao ACESS: 15 minutos sem emitir comando ADABAS.
               Programa com opcao ALTER: 5 minutos sem ENDTRA, FECHAR ou BACKOU
           017 Invalid file number:
                  The file number is equal to 0 or larger than 255;
                  The file was not in the data base;
                  The authorization level was too low to gain entry to the file;
                  The file was locked.
           018 Invalid file number usage. The file number was modified between
               successive L2/L5 calls.
           019 An attempt was made to update a file which was open for access on
               or, an attempt was made to access or update a locked cluster.
           020 One of the following invalid values was used for a CID value:
                      00000000      40404040       FFXXXXXX
           021 An invalid CID value was detected:
                  CID value specified with the get next option of a L1/L4
                      command was not found.
                  CID value not found and L3/L6 call was not an initial call.
                  CID value specified for L3/L6 command was assigned to another
                      L2/L5 or L9 command.
                  CID value specified for L9 command was assigned to another
                      L2/L5, L3/L6, or L9 command.
                  CID value specified for S8 command was not found.
                  CID value specified was assigned to an internal format buffer
                      for a different file.
                  Apos FIM-DE-ARQUIVO, foi dado mais um comando PROX.
           022 Invalid command:
                  Invalid command code;
                  An access only user attempted to issue an update command;
                  A NON-ET logic user issued a BT command;
                  A CLU user issued an ET command.
           023 Invalid starting isn specified for an L2/L5 sequence:
                  ISN not assigned to a record in the file;
                  ISN was larger than the masisn in effect for the file.
           025 The isn specified as lower limit for a S1/S4 command was not foun
           026 Invalid isn buffer length for an S9 command.
               The number of isns to be sorted as provided in isn quantity was 0

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                Página 1 de 14
a0d7bc5a5a94.doc
                  027 Sufficient work space was not available to accomodate the combine
                      sizes of the search and value buffers as indicated in the search
                      buffer length and value buffer length fields.
                  028 The first two bytes of the additions1 field contained an invalid
                      descriptor for an L3/L6 command.
                         The field was not a descriptor;
                         The descriptor was changed between successive calls.
                  029 L3/L6 command; a value repositioning was attempted (bytes 7-8 of
                      the additions1 field contain spaces) and the command option 2 fie
                      did not contain the value V.
                  040 A syntax error was detected in the format buffer:
                         The terminating period was missing;
                         The first position contains a period;
                         Length and/or format specified with a range definition;
                         An invalid element was detected.
                  041 An error was detected in the format buffer:
                         The field name specified is reserved for edit mask usage (E0-E
                         A periodic group index was larger than 99;
                         A multiple value field index was larger than 191;
                         An index was equal to 0;
                         A length specification was greater than 253;
                         nnnX was specified with nnn greater than 253;
                         A literal with more than 253 characters was specified
                         A subdescriptor, superdescriptor, or phonetic descriptor
                            was specified;
                         A field specified was not present in the file;
                         A periodic group name appears without an index;
                         A group containing a multiple value field was specified;
                         A length and/or format was used with a group notation;
                         A field in a periodic group was specified without an index
                         A range notation with a group name or a multiple value field a
                            the first or last element was especified;
                         A reference was made to the count of a multiple value field
                            contained in a periodic group and no index was included to
                            indicate the periodic group occurrence for which the count
                            was to be returned;
                         A count specification was made for a field which was neither a
                            multiple value field nor contained within a periodic group;
                         A count for a non-multiple value field within a periodic group
                            was specified;
                         A length and/or format specification was used with a periodic
                            group notation;
                         A group containing a multiple value field specified;
                         Invalid index usage;
                         A descending index range was specified;
                         A double index was used for a non-periodic field;
                         A multiple value field with an index specification and a
                            multiple value field without an index specification were us
                         Possivel indexacao alem dos limites da tabela
                            Vide campo ADDITIONS_2 do control block, se ele e':
                               M1 = tamanho do record buffer menor que 8
                               M2 = campo "DT" (data) não e' o primeiro do record buffe
                               M3 = data invalida - deveria estar no formaro AAMMDD.
                  042 The format buffer was too long.
                  043 L9 command; the descriptor specified in the format buffer did not
                      agree with the descriptor specified in the control block.
                  044 The format buffer was invalid for use with an update command.
                  048 OP command; the requested usage of one or more file conflicts wit

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                       Página 2 de 14
a0d7bc5a5a94.doc
                      the current usage of a file by another user or ADABAS utility.
                  049 The compressed record was too long for the buffer.
                  050 A syntax error in the record buffer was detected during processin
                      of an OP command.
                  051 An error in the record buffer was detected during processing of a
                      OP command.
                  052 An error ocurred while processing the record buffer:
                         The value of a P format field was not in packed decimal format
                         The value of a U format field was not in unpacked decim. forma
                         A variable length field was specified a length parameter.
                  053 The record buffer was too small.
                  054 The record buffer was too long (C3, C5 or ET command).
                  055 Attempted format or length conversion was not possible.
                  056 The descriptor value was too long.
                  057 L9 command; the descriptor specified in the search buffer
                      was invalid.
                  060 A syntax error was detected in the search buffer.
                  061 An error was detected in the search buffer:
                         Invalid element order;
                         Specified field was not a descriptor;
                         A descriptor contained in a periodic group was specified
                            without an index;
                         Invalid connection of partial criteria and/or different indice
                            used for a descriptor contained within a periodic group;
                         Invalid use of a phonetic descriptor;
                         From-to operator specified with a phonetic descriptor;
                         Invalid periodic group index;
                         Invalid index usage;
                         Length of a descriptor value was greater than 126;
                         Invalid file number specification;
                         Invalid usage of the S operator;
                         Invalid usage of the N operator;
                         Invalid from-to range specification;
                         From value greater than TO value;
                         But not value was outside the range of the preceding
                            FROM-TO range.
                  062 The length of the search and/or value buffers as specified in the
                      search and value buffer length fields respectively was not of
                      sufficient length to accomodate the search criteria specified.
                  063 The CID value specified in the search buffer was not found.
                  070 An overflow occurred in the table of sequential commands. The DBA
                      may increase the value used for the LQ parameter and/or RC comman
                      may be used to release elements.
                  071 An overflow occurred in the table of resulting isn lists. The DBA
                      may increase the size of the value used for the LI parameter and/
                      RC commands may be used to release elements.
                  072 An overflow occurred in the user queue. The DBA may increase the
                      value used for the NU parameter.
                  073 An overflow occurred in the section of the work data set in which
                      resulting isn lists are stored. The DBA may increase the size of
                      the work data set and/or the number of saved isn lists during an
                      session may be decreased.
                  074 No space was available on the work data set for complex find
                      commands. The DBA may increase the size of the work data set.
                  075 An additional associator or data storage extent was required for
                      file and the maximum of 5 extents had already been allocated.
                  076 An overflow occurred in the inverted list index (maximum 6 levels
                  077 Sufficient space was not available for a required associator or

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                       Página 3 de 14
a0d7bc5a5a94.doc
                      data storage extent.
                  080 An RE command was issued and no user data was stored for the user
                  081 A change made to the file cluster table prevented the sucessful
                      backout of a cluster during ADABAS initialization following an
                      abnormal termination.
                  082 An attempt was made to update a cluster which was locked.
                  084 Too many values were present for a sub or a superdescriptor.
                  085 Too many descriptor values were present for an update or add
                      record command.
                  088 Sufficient core was not available although only one user was
                      active. Parm values relating to core allocation should be verifie
                  099 An I/O error occurred.
                  113 The specified isn was invalid:
                           HI command was issued with isn equal to 0;
                           N2 command was issued with isn equal to 0
                      or larger than the maxisn in effect for the
                      file;
                           N2 command was issued and the specified isn
                      was assigned to another record in the file;
                           L1/L4 command was issued for a non-existent
                      isn.
                      Programa de um sistema tentando acessar/excluir registros de
                      moviemtno de um outro sistema.
                  144 The isn specified with an update command was not
                      in hold status for the user.
                  145 An attempt was made to hold an isn which was in
                      hold status for another user.
                  146 Invalid buffer length was detected by the ADABAS
                      interface routine.
                  148 The ADABAS nucleus was not active at the time
                      the command was issued.
                  149 An active CLU user attempted to issue an OP
                      command.
                  151 A command queue overflow occurred. The DBA may
                      increase the value used for the NC parameter
                      and/or the command may be issued when a lower
                      of command activity was in effect.
                  152 The internal user buffer was not large enough
                      to contain the user buffer areas.
                  160 More than 20 associator and data storage blocks
                      were marked as active in the buffer pool
                      for a single command.
                  161 The RABN chain in the header list of the ADABAS
                      bufferpool was invalid.
                  162 No additional space was available for ADABAS
                      buffer pool header blocks.
                  163 The RABN to be linked into the RABN-HEADER-CHAIN
                      was already in the chain.
                  164 More than 20 work areas were allocated for the
                      command being attempted.
                  165 A descriptor name was either invalid or did not
                      exist in the descriptor value table.
                  166 An error was detected in an inverted list index.
                  168 An internal CID required during coupling
                      processing was not found.
                  170 The ADABAS RABN required for the command could
                      not be located.
                  171 The constant set used by ADABAS could not be

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                       Página 4 de 14
a0d7bc5a5a94.doc
                      located.
                  172 An isn was equal to 0 or larger than the maxisn
                      setting in effect for the file.
                  173 An invalid data storage rabn was detected.
                  174 The starting data storage rabn for an L2/L5
                      command was not contained in the address converter
                      for the file.
                  175 An inconsistency was detected during L9 command
                      processing.
                  176 An incorrect call to an ADABAS subroutine was
                      detected.
                  177 A record could not be found in the data storage
                      block in which it should have been contained as
                      indicated by the address converter.
                  178 An inconsistency was detected between the field
                      definition table and the internal format buffer.
                  179 An error occurred while generating an internal
                      format buffer.
                  181 Autobackout was executed and the start of a
                      transaction could not be located.
                  182 Necessary ET data was not found in the
                      appropriate work block.
                  183 An internally assigned number for a data base I/O
                      operation was detected as invalid.
                  184 A phonetic field name could not be found.
                  198 Attempt to add or update a duplicate value for a
                      "UQ" descriptor.
                  199 An inconsistency was detected in an inverted list
                      index during an update operation.
                  200 Security violation detected; or, invalid cipher
                      code.
                  201 The password specified was not found.
                      Programa de um sistema tentando incluir registros de movimento de
                      outro sistema.
                      Inclusao de movimentos não cadastrados.
                  202 An attempt was made to use a file for which the
                      user is not authorized.
                  203 An attempt was made to delete a record in a file
                      for which the user is not authorized.
                  220 The receiving/relay node was unable to allocate a
                      buffer to read the command; if this response-code
                      is recurrent, the size of the receiving/relay
                      node's Attached Buffer Pool should be increased
                      (see the NAB parameter in section 3.3).
                  221 The receiving node intercepted an ABEND during the
                      ADABAS SVC 4 call for the command.
                  222 No CQE could be allocated on a relay node (same as
                      response code 151 on a receiving node).
                  223 The ADABAS command has already been to the node to
                      which a relay node would transmit it (node loop).
                  224 The ADABAS command has been timed out by the re-
                      ceiving/relay node.
                  250 This response code is returned by ADAMINT if an
                      invalid deleter function is detected.
                  251 This response code is returned by ADAMINT if an
                      invalid updater function is detected.
                  252 An error occurred during ADABAS svc processing
                      (post error). This response code may also be

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                       Página 5 de 14
a0d7bc5a5a94.doc
                        returned by ADAMINT if an invalid REREAD function
                        is detected.
                  253   An error occurred during ADABAS svc processing
                        (invalid buffer length detected). This response
                        code may also be returned by ADAMINT if an invalid
                        READSET, SEQREAD, or READVAL function is detected.
                  254   CT time exceeded, or an internal error ocurred du-
                        ring processing of an attached buffer (buffer over-
                        flow). This response code may also be returned by
                        ADAMINT if an invalid RELEASER function is detected.
                        ===> Reexecutar
                  255   All attached buffers were allocated at the time
                        the command was processed.
                        Muita atividade na maquina
                        ===> Reexecutar
                  300   Macro PORLAN - mais de 140 lançamentos.
                  301   Macro PROXLAN sem a macro PRIMLAN correspondente.
                  302   Macro PRIMLAN - mais de 140 lançamentos.
                  304   Erro de Sincronismo- Foi emitido comando de 'HOLD/
                        UPDATE' para um Banco de Dados, sendo que já
                        existia transação Aberta para outro Banco de Dados.
                  305   Erro na ENDTRA- Foi emitida a macro ENDTRA com
                        ETDATA para DB ALTERNATIVO.
                  306   Erro na FECHAR- Foi emitida a macro FECHAR sendo que
                        existia transação Aberta para DB ALTERNATIVO.
                  307   Erro na BACTRA- Foi emitida a macro BACTRA(arq.),
                        para um Banco de Dados; sendo que existia Transação
                        Aberta para outro Banco de Dados.
                  309   Macro TODOS - quantidade de registros encontrados
                        maior que o QMAX informado.
                  320   Erro na macro #BUSCAC - O código de identificação
                        da Tabela da CSA não corresponde com o numero de
                        entrada da mesma.
                        FAVOR AVISAR O DESTEC.DBA.
                  321   Tabela de file numbers ou de aplicações não esta
                        carregada na CSA.
                        FAVOR AVISAR O DESTEC.DBA.
                  323   Aplicação não existe na Tabela da CSA.
                        FAVOR AVISAR O DESTEC.DBA.
                  324   File number negativo.
                        FAVOR AVISAR O DESTEC.DBA.
                  327   File number não existe na Tabela da CSA.
                        Verificar se foi solicitado o guarda do Dicionário.
                        FAVOR AVISAR O DESTEC.DBA.
                  328   Tentou atualizar um Banco de Dados e já havia uma transação a
                        para outro Banco de Dados
                  329   Holdou mais que 100 ISNs.
                        Observe-se que a macro TODOS conta como registro holdado mesmo
                        quando não encontra nenhum registro que satisfaça a condição.
                  330   Após ter recebido um reponse code 329, emitiu mais um comando
                        sem dar ET
                  331   Ultrapassou o limite de 6000 CALL's ADABAS permitido para testes
                        Provável LOOP de programa
                  332   Ultrapassou o limite de CALL's ADABAS "adicional" permitido para
                        testes
                  333   Tabela de ISN's menor do que o QMAX informado (macro TODOS).
                  355   Faltou informar cartão DD para Banco de Dados
                        Alternativo.

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                         Página 6 de 14
a0d7bc5a5a94.doc
                  386 Faltou TCT para o terminal em questão
                      Ação : Dirija-se ao DESTEC - TP
                  387 Faltou definir TWA.
                  388 Falta memória para uma das seguintes rotinas de
                      interface: ADALNC, ADALNK, ADARUN ou ADASEG.
                  389 Falta memória para a transação
                      Ação : Dirija-se ao DESTEC - DB
                  390 não existe USER AREA
                      Ação : Dirija-se ao DESTEC - DB




D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11              Página 7 de 14
a0d7bc5a5a94.doc
 /*------------------------------------------------------------------*/

 /*                                                                 */

 /* CODIGO DE ERROS CICS                                             */
 /*                                                                  */
 /*------------------------------------------------------------------*/
     ABMA área de terminal (TIOA) com tamanho zero
                                  ou acima do máximo permitido
     ABMB posição do cursor alem dos limites da tela especificada
     ABMG função BMS não disponível
     ABMI mapa especificado não reconhecido como INPUT
     ABMM mapa invalido
     ABMO mapa especificado não reconhecido como OUTPUT
     ABM0 mapa não pode ser carregado
     ABM7 trailer especificado e' maior que a pagina
     ABNC falha na tentativa de acesso 'a TS
     ABNH falha no envio de dados 'a estação remota
     AEIA condição ERROR sem HANDLE CONDITION
     AEID condição EOF sem HANDLE CONDITION
     AEIK condição TERMIDERR sem HANDLE CONDITION
     AEIM condição NOTFND sem HANDLE CONDITION
     AEIP condição INVREQ sem HANDLE CONDITION
     AEIQ condição IOERR sem HANDLE CONDITION
     AEIU condição ILLOGIC sem HANDLE CONDITION
     AEIV condição LENGERR sem HANDLE CONDITION
     AEIW condição QZERO sem HANDLE CONDITION
     AEIZ condição ITEMERR sem HANDLE CONDITION
     AEI0 condição PGMIDERR sem HANDLE CONDITION
     AEI9 condição MAPFAIL sem HANDLE CONDITION
     AEYB condição INVMPSZ sem HANDLE CONDITION
     AEYH condição QIDERR sem HANDLE CONDITION
     AFCA tentativa de acessar um arquivo DISABLED
     AICA programa em "loop"
     ALFA overflow na LIFO = programa em "loop"
     ALFE invasão de área LIFO
     AMSA não foi reconhecida a half-word de endereçamento
          dos dados transmitidos via terminal
     AOCA erro no OPEN de arquivo VSAM ESD
     APCI solicitação de programa PL/I sem suporte correspondente
     APCL biblioteca PL/I não referenciada no CICS
     APLD erro na transmissão de registro para a fila CPLD
     APLE erro na manipulação de rotinas do PL/I
     APLI erro na transmissão de registros para a fila CPLI
     APLM programa sem a procedure MAIN
     APLS programa encerrado numa ERROR on unit
     APLX estouro de memória = programa em "loop"
                             ou ISASIZE insuficiente
     ARTE erro na tentativa de acesso 'a TS
     ASRA termino anormal por interrupção do programa
     ASRB abend do sistema interceptado pelo CICS
     ASRC termino anormal por interrupção de programa PL/I
     ATCH transação cancelada pelo operador
     ATCI transação cancelada pelo operador
     ATND transação encerrada pelo programa de controle
     ATNI transação encerrada pelo programa de controle
     AXTA erro no tamanho dos dados a serem transmitidos
     AXTB falha na obtenção de TIOA para transmissão dos dados

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                Página 8 de 14
a0d7bc5a5a94.doc
        AXTC falha no preparo dos dados para transmissão
        AXTG falha na transformação dos dados transmitidos




D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11   Página 9 de 14
a0d7bc5a5a94.doc
 /*------------------------------------------------------------------*/

 /*                                                                 */ D, etc)

 /* MENSAGENS DE ERRO - SORT                                         */ D, etc)
 /*                                                                  */ D, etc)
 /*------------------------------------------------------------------*/
           005 palavra chave não reconhecida (não e' SORT, MERGE, RECORD, etc)
                              ou iniciada na coluna 1
           007 erro de sintaxe.
                verifique: - correspondência de parêntesis
                           - ausência de virgulas
                           - brancos não permitidos
                           - tipo de formato invalido
                           - operador invalido
                           - constante invalida
           012 falta a definição dos campos de controle (FIELDS)
           013 comando SORT/MERGE contem palavra chave não reconhecida
           015 tamanho do registro variável e'
                - inferior ao mínimo especificado
                - ou menor que os campos de controle (FIELDS)
           027 uma das especificações de FIELDS ultrapassou:
                - o tamanho máximo do registro
                - ou o tamanho indicado para reformatação
           042 DDname duplicado ou
               conflito entre os cartões: SORTWKnn x SORTINnn
                                      ou   SORTIN     x SORTINnn
               (SORT utiliza SORTIN, SORTOUT E SORTWKnn)
               (MERGE utiliza SORTINnn e SORTOUT)
           043 conflito entre DCBs:
                - arquivos de entrada x arquivos de saída
                - ou entre os arquivos de entrada
                (na concatenação de arquivos com blocos diferentes,
                 o maior bloco deve ser o primeiro da fila)
           046 aumentar a área de SORTWKnn
           059 tamanho do registro:
                - menor que 18, para fita
                - ou maior que o limite da trilha
           063 ausência do cartão DD de entrada ou saída
                         ou da especificação de campos (FIELDS)
                - ou conflito de DCB
                (na concatenação de arquivos com blocos diferentes,
                 o maior bloco deve ser o primeiro da fila)
           068 durante a operação de MERGE,
                um dos arquivos não estava previamente classificado
           073 registro variável com tamanho superior ao máximo
                especificado na DCB ou na reformatação
           102 condição não especificada para o comando INCLUDE/OMIT
           103 comando INCLUDE/OMIT contem palavra chave não reconhecida
           104 comando INREC/OUTREC contem palavra chave não reconhecida
           105 comando SORT/MERGE/SUM contem palavra chave não reconhecida
           116 aumentar a área de SORTWKnn
           119 conflito entre o SUM FIELDS e o SORT/MERGE FIELDS
           125 conflito entre as diversas especificações do SUM FIELDS
           158 faltou o cartão SYSOUT DD SYSOUT=x




D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                Página 10 de 14
a0d7bc5a5a94.doc
 /*------------------------------------------------------------------*/

 /*                                                                  */
 /* MENSAGEM DE ERROS PLI                                            */
 /*                                                                  */
 /*------------------------------------------------------------------*/
           021 campo/estrutura de I/O menor que o tamanho do registro
           022 campo/estrutura de I/O maior que o tamanho do registro
           023 campo/estrutura de I/O não tem tamanho suficiente para
                inserção da key embutida
           024 registro lido tem tamanho zero
           041 erro de transmissão num arquivo de saída
           042 erro de transmissão num arquivo de entrada
           043 erro de transmissão na gravação de índice VSAM
           044 erro de transmissão na leitura de índice VSAM
           045 erro de transmissão num arquivo VSAM de saída
           046 erro de transmissão num arquivo VSAM de entrada
           051 key especificada não tem correspondente no arquivo
           052 key especificada já existente no arquivo
           053 key especificada não está em ordem crescente
           054 key especificada não pode ser convertida para argumento valido
           055 key especificada e' nula
                ou foi modificada para um comando REWRITE
           056 key especificada fora dos limites do arquivo
           057 não ha' mais espaço disponível para inclusão de registros
           058 key especificada fora dos limites de variação do arquivo
           081 conflito nos atributos do arquivo
                entre DECLARE e OPEN
           082 conflito entre os atributos do arquivo e sua organização fisica
           084 faltou o cartão DD para o arquivo
           085 erro de I/O na inicialização de arquivo REGIONAL
           087 conflito nas especificações do arquivo
                entre ENVIRONMENT e DCB
           088 conflito nas especificações do arquivo
                entre ENVIRONMENT e DCB
           091 ENVIRONMENT contem opção invalida para arquivo VSAM
           092 erro na abertura de arquivo VSAM
           093 erro não identificado na abertura do arquivo
           095 índice alternado de arquivo VSAM esta' vazio
          1007 comando REWRITE/DELETE sem o READ precedente
          1009 comando de I/O especifica uma operação/opção em conflito com os
                atributos do arquivo
          1011 erro de I/O
          1019 tentativa de CLOSE em arquivo não aberto
          1025 memória virtual insuficiente para tratamento VSAM
          1029 falha na reposição de arquivo VSAM
          1031 gravação seqüencial invalida para arquivo VSAM
          1550 exponenciação com base zero e expoente negativo ou zero
          1551 exponenciação com base zero e expoente negativo ou zero
          1552 exponenciação com base zero e expoente negativo ou zero
          1553 exponenciação com base zero e expoente negativo ou zero
          1560 exponenciação com base zero e expoente negativo ou zero
          1561 exponenciação com base zero e expoente negativo ou zero
          3800 tamanho da estrutura excede 16 megabytes
          3909 memória insuficiente para acessar rotina chamada por CALL
          3910 ISASIZE insuficiente para acessar rotina chamada por CALL
          4000 erro numa rotina PL/I
                (geralmente devido a uma invasão de área)

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                Página 11 de 14
a0d7bc5a5a94.doc
                          repassar utilizando o comando (SUBRG):
                8091      a instrução a ser executada e' invalida
                          (geralmente devido a uma invasão de área)
                          repassar utilizando o comando (SUBRG):
                8094      invasão de área detectada
                          repassar utilizando o comando (SUBRG):
                8097      campo numérico não inicializado
                          ou com conteúdo invalido (erro no preenchimento anterior)
                          ou com endereço errado (por invasão de área)
                9250      rotina FETCH não localizada
                9251      erro de transmissão na carga de rotina FETCH
                          será necessário recompilar a rotina




D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                            Página 12 de 14
a0d7bc5a5a94.doc
 /*------------------------------------------------------------------*/

 /*                                                                 */

 /* MENSAGENS DE ERRO - ABENDS SYSTEM                               */

 /*                                                                  */
 /*------------------------------------------------------------------*/
           B37     área secundaria insuficiente ou falta espaço
                                  no disco ou programa em LOOP
           D37     AREA PRIMARIA ESPECIFICADA INSUFICIENTE
                                  ou programa em LOOP
           E37     PARTICIONADO CHEIO
           0CA     ESTOURO DE CAMPO FIXED
           0CB     DIVISAO POR ZERO (FIXED) OU CAMPO não COMPORTA VALOR
           0CF     DIVISAO POR ZERO (FLOAT)
           0C1     OPERATION EXCEPTION
                   PROVAVEL ESTOURO DE ARRAY
                   OU FALTA DDNAME PARA ADABAS
           0C4     PROTECTION EXCEPTION - PROVAVEL ESTOURO DE ARRAY
                   OU USO DE CAMPO BASED ANTES DA LEITURA
                   OU CALL DE ROTINA COM ATRIBUTOS ERRADOS
           0C6     SPECIFICATION EXCEPTION
                   PROVAVEL ESTOURO DE ARRAY
           0C7     DATA EXCEPTION
                   CONTEUDO DE CAMPO FIXED não NUMERICO
           0C8     ESTOURO DE CAMPO BIN FIXED
           0F3     MACHINE CHECK
                   REPASSAR O JOB
           001     DATA CHECK
                   TENTAR REPASSAR
           002     BLOCO > 32768 (FITA)
                   BLOCO > 13030 (DISCO 3331)
                   CORRIGIR
           013     MEMBRO não EXISTE NO PDS
           028     ERRO DE PAGINACAO
                   REPASSAR O JOB
           038     INDICE DE ARQ. INDEXADO SEQUENCIAL CHEIO
                   CORRIGIR
           106     ESPACO INSUFICIENTE PARA CARGA DO PROGRAMA
                   AUMENTAR REGION
           122     CANCELADO PELO OPERADOR, COM DUMP
                   analisar causa e corrigir
           137     ERRO NO TRAILER DA FITA
           213      ARQUIVO CATALOGADO não EXISTE MAIS NO DISCO
           222     CANCELADO PELO OPERADOR (SUSPEITA DE LOOP)
                   analisar causa e corrigir
           237     FITA - CONTAGEM DE BLOCO
           30A     falta de memória
                   (aumentar REGION)
           322     CANCELADO POR TEMPO (PROVAVEL ERRO DE CLASSE
                              (alterar classe)
           413     UNIT=AFF COM OPEN NOS DOIS ARQUIVOS
           414     DISCO - unidade/volume com defeito
                   repassar o Job
           513     UNIT=AFF, DD DIFERENTE, não DEU CLOSE NO ANTERIOR
           522     CANCELADO POR DEMORA DO OPERADOR (MONTAGEM
                                  de arquivo ou REPLY)

D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-   01/10/11                Página 13 de 14
a0d7bc5a5a94.doc
                  613          ERRO DE I/O
                               repassar o Job
                  637          CONCATENACAO DE BLOCOS DIFERENTES
                               colocar o maior primeiro
                  706          ROTINA não LINKEDITADA
                  713          GRAVACAO DE ARQUIVO POR TERMINAL, COM DSN
                                            sem @ ou em fita com DISP=OLD
                  714          DISCO - unidade/volume com defeito
                               repassar o Job
                  722          CANCELADO POR EXCESSO DE LINHAS
                                              (alterar classe do job)
                  737          ERRO DE I/O
                               repassar o Job
                  80A          PROGRAMA não CABE NA MEMORIA
                               AUMENTAR O REGION
                  806          PROGRAMA não EXISTE NA BIBLIOTECA
                  813          ESPECIFICACAO DO VOL=SER E DSN (NA FITA) não BATEM
                  837          GRAVACAO DE MAIS DE CINCO FITAS
                  913          SECURITY VIOLATION
                               leitura de arquivo de produção, ou
                               EXEC PGM= em ambiente de teste




D:\Docstoc\Working\pdf\d210160f-74da-4ef4-888d-     01/10/11                        Página 14 de 14
a0d7bc5a5a94.doc

								
To top