Document Sample
1611137pdf Powered By Docstoc
					- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - RXV
MANUFACTURED FOR RXV PRODUCTS BY BIMEDA-MTC ----------------------------------------------------------PRODUCT NAME(S): RXV STERILE SALINE SOLUTION PRODUCT IDENTIFICATION: MSDS ID#: 68450, 68451, 68452 MANUFACTURER(S): BIMEDA-MTC ANIMAL HEALTH 420 BEAVERDALE ROAD CAMBRIDGE, ONTARIO CANADA N3C 2W4 TELEPHONE: 519-654-8000 PRODUCT SIZE: 250 mL, 500 mL, 1000 mL ----------------------------------------------------------SECTION I - MATERIAL IDENTIFICATION AND USE ----------------------------------------------------------MATERIAL NAME IDENTIFIER: Normal Sterile Saline Solution MATERIAL USE: Veterinary Pharmaceutical WHMIS CLASSIFICATION: Not classified ----------------------------------------------------------SECTION II - HAZARDOUS INGREDIENTS ----------------------------------------------------------Not applicable ----------------------------------------------------------SECTION III - PHYSICAL DATA ----------------------------------------------------------PHYSICAL STATE: Liquid CLARITY: COLOUR: Clear colourless % VOLATILE: N/A SPECIFIC GRAVITY: 1.0 - 1.05 pH: 4.5 - 7.0 VISCOSITY: Water thin ODOUR THRESHOLD: N/A SOLUBILITY IN WATER (20 deg C): Soluble BOILING POINT (deg C): 100 - 110 deg VAPOR DENSITY (Air = 1): N/A % VOLATILES: N/A ----------------------------------------------------------SECTION IV - FIRE AND EXPLOSION DATA ----------------------------------------------------------FLAMMABILITY: Not applicable FLASH POINT (deg C TCC): Not applicable LOWER EXPLOSIVE LIMIT (% vol) COMPONENT: Not applicable UPPER EXPLOSIVE LIMIT (% vol) COMPONENT: Not applicable HAZARDOUS COMBUSTION PRODUCTS: Not applicable MEANS OF EXTINCTION: Not applicable SPECIAL FIRE HAZARDS: None known to us at this time. ----------------------------------------------------------SECTION V - REACTIVITY DATA ----------------------------------------------------------CONDITIONS FOR CHEMICAL INSTABILITY: Not applicable INCOMPATIBILITY: Not applicable HAZARDOUS DECOMPOSITION PRODUCTS: Not applicable CONDITIONS OF REACTIVITY: Not applicable ----------------------------------------------------------SECTION VI - TOXICOLOGICAL PROPERTIES ----------------------------------------------------------ROUTE OF ENTRY: EYE: No SKIN CONTACT: No SKIN ABSORPTION: No INGESTION: Yes INHALATION: No EFFECTS OF ACUTE EXPOSURE: INGESTION: May cause vomiting, headache and medical problems.

----------------------------------------------------------SECTION VI - TOXICOLOGICAL PROPERTIES (2) ----------------------------------------------------------EFFECTS OF CHRONIC EXPOSURE: N/A IRRITANCY: As for salt RESPIRATORY TRACT SENSITIZATION: No Data Available CARCINOGENICITY: Non Hazardous by WHMIS Criteria REPRODUCTIVE EFFECTS: Insufficient Data AVAILABLE TERATOGENICITY: Insufficient Data Available MUTAGENICITY: Insufficient Data Available SYNERGISTIC MATERIALS: Not available ----------------------------------------------------------SECTION VII - PREVENTATIVE MEASURES ----------------------------------------------------------GLOVES: Not required EYE PROTECTION: Chemical splash goggles not required under normal conditions of use. RESPIRATORY PROTECTION: Not normally required if good ventilation is maintained and exposure guidelines are not exceeded. OTHER PROTECTIVE EQUIPMENT: As required by employer code. ENGINEERING CONTROLS: General ventilation normally adequate. Local exhaust for dusts, mists or fumes. LEAK AND SPILL PROCEDURE: Before attempting clean-up, refer to hazard data given above. Small spills may be absorbed with non-reactive absorbent and placed in suitable, covered labelled containers. Prevent large spills from entering sewers or waterways. Contact emergency services and supplier for advice. WASTE DISPOSAL: Review federal, provincial and local government requirements prior to disposal. STORAGE REQUIREMENTS: Store in closed container. Store away from incompatible materials. ----------------------------------------------------------SECTION VIII - FIRST AID ----------------------------------------------------------EYE: Immediately flush with water for 15 minutes. If symptoms persist call doctor. SKIN: Flush with water. Call a doctor if irritation develops. Completely decontaminate clothing, shoes and leather goods before reuse or discard. INHALATION: Remove to fresh air. If symptoms persist, call a doctor. INGESTION: Do not induce vomiting. Rinse mouth with water, then drink one glass of water. Contact a doctor immediately. Never give anything by mouth if victim is unconscious, is rapidly losing consciousness or is convulsing. ----------------------------------------------------------SECTION IX - ADDITIONAL INFORMATION ----------------------------------------------------------TDG SHIPPING NAME: Not regulated under TDG PREPARED BY: R. Loucks DATE: September 28, 1998 ----------------------------------------------------------Information for this material safety data sheet was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond the control of the supplier, it is assumed that user of this material has been fully trained according to the mandatory requirements of WHMIS. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this form. If user requires independent information on ingredients in this or any other material, we recommend contact supplier.

Page 1 of 2

- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - RXV
----------------------------------------------------------DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: although preparer and owner have taken reasonable care in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each user should make a determination as to the suitability of the information for their particular purpose(s). A request has been made to the manufacturer to approve the contents of this material safety data sheet. Upon receipt of any changes a new MSDS will be made available. ----------------------------------------------------------COMPAS Code: 16111370


Page 2 of 2

Shared By: