Docstoc

ISO Update.fm

Document Sample
ISO Update.fm Powered By Docstoc
					                 ISO Update

Supplement to ISO Focus+
                July/August 2010


People and places

  ISO Members                                             2



International Standards in process
from 8 June to 5 July 2010

  Committee Drafts (CD) registered                        3

  Draft International Standards (DIS) circulated          5

  Final draft International Standards (FDIS) circulated   7

  Standards published                                     10
  Standards confirmed                                     13

  Standards withdrawn                                     15

  Meeting calendar                                        15
People and places
ISO Members
Since the June 2010 issue of ISO Focus+, the
following changes affecting ISO members have
occurred:




New CEOs
                                               Address changes
Member bodies
                                               Member bodies
CYPRUS (CYS)
Director General: Dr. Ioannis Karis            CAMEROON (ANOR)
                                               Agence des Normes et de la Qualité
                                               Avenue du Boulevard du 20 Mai, Immeuble Hilton
PAKISTAN (PSQCA)
                                               (Aile Gauche 2ème & 3ème étages)
Director General: Mr. Irfan Nadeem             B.P. 14996
                                               YAOUNDE, Province : Centre, Code : 237
SAINT LUCIA (SLBS)
Director: Dr. Sherry Constantine               NAMIBIA (NSI)
                                               Web         www.nsi.com.na

                                               NIGERIA (SON)
                                               E-Mail      info1@sononline-ng.org
                                               Web         www.sononline-ng.org

                                               PAKISTAN (PSQCA)
                                               Pakistan Standards and Quality Control Authority
                                               Pakistan Secretariat, Block #77
                                               SADDAR KARACHI-74400


                                               Correspondent member

                                               SENEGAL (ASN)
                                               Association Sénégalaise de Normalisation
                                               Ministère des Mines, de l'Industrie,
                                               de la transformation alimentaire des produits
                                               agricoles et des PME
                                               21, Lotissement Front de Terre & Bourguiba
                                               Boîte postale 4037
                                               DAKAR
                                               Tel.        +221 33 827 64 01
                                               Fax         +221 33 827 64 12
                                               E-Mail      asnor@orange.sn
                                               Web         www.asn.sn




2                                                       ISO Update, Supplement to ISO Focus+– July/August 2010
International Standards in process
An International Standard is the result of an agreement between the       TC 35          Paints and varnishes
member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated    ISO/CD 15091   Paints and varnishes – Determination of the
for study within an ISO technical committee. When consensus has                          electrical conductivity and the specific electrical
been reached within the technical committee, the document is sent to                     resistivity
the Central Secretariat for processing as a draft International
Standard (DIS). The DIS requires approval by at least 75 % of the         ISO/CD 15104   Paints and varnishes – Determination of the
member bodies casting a vote.                                                            percentage volume of non-volatile matter by
                                                                                         measuring the dry-film density

                                                                          ISO/CD 15110   Paints and varnishes – Artificial weathering
                                                                                         including acidic deposition

                                                                          ISO/CD 15184   Paints and varnishes – Determination of film
                                                                                         hardness by pencil test
                                                                                         (Revision of ISO 15184:1998)
CD registered                                                             ISO/CD         Paints and varnishes – Determination of stone-
                                                                          20567-3        chip resistance of coatings – Part 3: Single-impact
                                                                                         test with free-flying impact bodies
Period from 08 June to 05 July 2010
                                                                                         (Revision of ISO 20567-2:2005)
These documents are currently under consideration in the technical
committee.                                                                TC 46          Information and documentation
They have been registered at the Central Secretariat.
*Available in English only                                                ISO/CD 13008   Digital records conversion and migration process

TC 17              Steel                                                  TC 61          Plastics

ISO/CD 683-1       Heat-treatable steels, alloy steels and free-cutting   ISO/CD 12815   Fibre-reinforced plastics composites –
                   steels – Part 1: Non-alloy steels for quenching                       Determination of plain-pin bearing strength
                   and tempering
                   (Revision of ISO 683-1:1987)                           ISO/CD 12856   Plastic railway sleepers (railroad ties)

ISO/CD 683-11      Heat-treatable steels, alloy steels and free-cutting   ISO/CD 13931   Carbon fibre – Determination of volume resistivity
                   steels – Part 11: Case-hardening steels
                   (Revision of ISO 683-11:1987)
                                                                          TC 67          Materials, equipment and offshore
                                                                                         structures for petroleum, petrochemical
ISO/CD 683-2       Heat-treatable steels, alloy steels and free-cutting                  and natural gas industries
                   steels – Part 2: Low alloy steels for quenching and
                   tempering                                              ISO/CD         Petroleum and natural gas industries –
                   (Revision of ISO 683-1:1987)                           13503-6        Completion fluides and materials – Part 6:
                                                                                         Procedure for measuring leakoff of completion
TC 22              Road vehicles                                                         fluids under dynamic conditions

ISO/CD             Road vehicles – Open test sequence exchange            TC 71          Concrete, reinforced concrete and
13209-2            format (OTX) – Part 2: Data model specification                       pre-stressed concrete
ISO/CD             Road vehicles – Open test sequence exchange            ISO/CD         Maintenance and repair of concrete structures –
13209-3            format (OTX) – Part 3: Standard Extensions and         16311-1        Part 1: General principles
                   Requirements
                                                                          ISO/CD         Maintenance and repair of concrete stuctures –
ISO/CD             Road vehicles – Communication protocol                 16311-2        Part 2: Assessment of existing concrete structures
15118-1            between electric vehicle and grid – Part 1:
                   Definitions and use-case                               ISO/CD         Maintenance and repair of concrete structures –
                                                                          16311-3        Part 3: Design of repairs and prevention
TC 23              Tractors and machinery for agriculture
                   and forestry                                           ISO/CD         Maintenance and repair of concrete structures –
                                                                          16311-4        Part 4: Execution of repairs and prevention
ISO/CD 12934       Tractors and machinery for agriculture and
                   forestry – Basic types – Definitions and               TC 92          Fire safety
                   classification
                                                                          ISO/CD         Fire tests – Calibration and use of heat flux
TC 28              Petroleum products and lubricants                      14934-2        meters – Part 2: Primary calibration methods
                                                                                         (Revision of ISO 14934-2:2006)
ISO/CD 10976       Refrigerated light hydrocarbon fluids -
                   Measurement of cargoes on board marine LNG             ISO/CD 19706   Guidelines for assessing the fire threat to people
                   carriers                                                              (Revision of ISO 19706:2007)

TC 34              Food products                                          TC 106         Dentistry

ISO/DTS 17193      Milk–Determinationofthelactoperoxidaseactivity –       ISO/CD 12836   Dentistry - Test methods for accuracy of dental
                   Photometricmethod(Referencemethod)                                    digitizing devices of CAD/CAM systems



ISO Update, Supplement to ISO Focus -- July/August 2010                                                                                        3
ISO/CD 13116    Dentistry - Radio-opacity - Method for               JTC 1             Information technology
                determination of radio-opacity of materials used
                in dentistry                                         ISO/IEC 9594-1: Information technology – Open Systems
                                                                     2008/PDAM 1     Interconnection – The Directory: Overview of
TC 108          Mechanical vibration, shock and                                      concepts, models and services – Part 1: –
                condition monitoring                                                 Amendment 1: Communication Enhancements

ISO/CD          Mechanical vibration – Vibration of rotating         ISO/IEC           Information technology – Open Systems
14839-4         machinery equipped with active magnetic              9594-10:2008/     Interconnection – The Directory: Use of systems
                bearings – Part 4: Technical guidelines              PDAM 1            management for administration of the Directory –
                                                                                       Part 10: – Amendment 1: Communication
TC 121          Anaesthetic and respiratory equipment                                  Enhancements

ISO/CD 8835-7   Inhalational anaesthesia systems – Part 7:           ISO/IEC 9594-2: Information technology – Open Systems
                Anaesthetic systems for use in areas with limited    2008/PDAM 1     Interconnection – The Directory: Models – Part 2:
                logistical supplies of electricity and anaesthetic                    – Amendment 1: Communication Enhancements
                gases
                                                                     ISO/IEC 9594-3: Information technology – Open Systems
TC 130          Graphic technology                                   2008/PDAM 1     Interconnection – The Directory: Abstract service
                                                                                     definition – Part 3: – Amendment 1:
ISO/CD 14861    Requirements for colour proofing systems using                       Communication Enhancements
                electronic displays
                                                                     ISO/IEC 9594-4: Information technology – Open Systems
                                                                     2008/PDAM 1     Interconnection – The Directory: Procedures for
TC 147          Water quality
                                                                                     distributed operation – Part 4: – Amendment 1:
                                                                                     Communication Enhancements
ISO/CD 9308-2   Water quality – Detection and enumeration of
                coliform organisms, thermotolerant coliform          ISO/IEC 9594-5: Information technology – Open Systems
                organisms and presumptive Escherichia coli –         2008/PDAM 1     Interconnection – The Directory: Protocol
                Part 2: Multiple tube (most probable number)
                                                                                     specifications – Part 5: – Amendment 1:
                method                                                               Communication Enhancements
                (Revision of ISO 9308-2:1990)
                                                                     ISO/IEC 9594-6: Information technology – Open Systems
TC 150          Implants for surgery                                 2008/PDAM 1     Interconnection – The Directory: Selected
                                                                                     attribute types – Part 6: – Amendment 1:
ISO/CD 5834-4   Implants for surgery – Ultra-high-molecular-                         Communication Enhancements
                weight polyethylene – Part 4: Oxidation index
                measurement method                                   ISO/IEC 9594-7: Information technology – Open Systems
                (Revision of ISO 5834-4:2005)                        2008/PDAM 1     Interconnection – The Directory: Selected object
                                                                                     classes – Part 7: – Amendment 1:
TC 162          Doors and windows                                                    Communication Enhancements

ISO/CD 13316    Terminology for doors and windows                    ISO/IEC 9594-8: Information technology – Open Systems
                (Revision of ISO 1804:1972)                          2008/PDAM 1     Interconnection – The Directory: Public-key and
                                                                                     attribute certificate frameworks – Part 8: –
TC 205          Building environment design                                          Amendment 1: Communication Enhancements

ISO/CD          Building environment design – Radiant heating        ISO/IEC 9594-9: Information technology – Open Systems
11855-6         and cooling system – Part 6: Operation and           2008/PDAM 1     Interconnection – The Directory: Replication –
                control                                                              Part 9: – Amendment 1: Communication
                                                                                     Enhancements
TC 210          Quality management and corresponding
                general aspects for medical devices                  ISO/IEC CD        Information technology - Universal Coded
                                                                     10646             Character Set (UCS)
ISO/DTS         Medical devices – Hierarchical coding structure                        (Revision of ISO/IEC FCD 10646)
19218-1         for adverse events – Part 1: Event type codes
                                                                     ISO/IEC CD TR     Information technology – Service management –
                (Revision of ISO/TS 19218:2005)
                                                                     20000-2           Part 2: Guidance on application of service
                                                                                       management systems
TC 215          Health informatics
                                                                     ISO/IEC CD      * Information technology – Security techniques –
ISO/DTS 14265   Health Informatics - Classification of purposes      29115             Entity authentication assurance framework
                for processing personal health information
                                                                     ISO/IEC CD      * Information technology - Security techniques -
TC 234          Fisheries and aquaculture                            29147             Responsible Vulnerability Disclosure

ISO/CD 12878    Environmental monitoring of the seabed impacts
                from marine finfish farms

TC 244          Industrial furnaces and associated
                thermal processing equipment

ISO/CD 13578    Industrial furnaces and associated thermal
                processing equipment – Safety requirements
                for combustion and fuel handling systems




4                                                                                    ISO Update, Supplement to ISO Focus - July/August 2010
                                                                       TC 28             Petroleum products and

DIS circulated                                                         ISO/DIS
                                                                                         lubricants
                                                                                        * Refrigerated hydrocarbon fluids       2010-11-16
                                                                       18132-1            and non-petroleum based liquefied
Period from 08 June to 05 July 2010                                                       gaseous fuels – General
These documents have obtained substantial support within the                              requirements for automatic tank
appropriate ISO technical committee                                                       gauges – Part 1: Automatic tank
They have been submitted to the ISO member bodies for voting by                           gauges for liquefied natural gas on
the date shown                                                                            board marine carriers and floating
*Available in English only                                                                storage
                                                                                          (Revision of ISO 18132-1:2006)
                                                                Vote
                                                          terminates   ISO/DIS          * Refrigerated hydrocarbon fluids       2010-11-16
                                                                       18132-3            and non-petroleum based liquefied
TC 6               Paper, board and pulps                                                 gaseous fuels – General
                                                                                          requirements for automatic tank
ISO/DIS 534        Paper and board – Determination of 2010-11-25                          gauges – Part 3: Automatic tank
                   thickness, density and specific                                        gauges for liquefied petroleum and
                   volume                                                                 chemical gases on board marine
                   (Revision of ISO 534:2005)                                             carriers and floating storage
                                                                                          (Revision of ISO 18132-1:2006)
ISO/DIS            Pulp, paper and board –            2010-08-18
15320.2            Determination of pentachlorophenol                  TC 29             Small tools
                   in an aqueous extract
                   (Revision of ISO 15320:2003)                        ISO/DIS 3364      Indexable hardmetal (carbide)          2010-12-01
                                                                                         inserts with rounded corners, with
TC 8               Ships and marine technology                                           cylindrical fixing hole – Dimensions
                                                                                         (Revision of ISO 3364:1997)
ISO/DIS 14409 * Ships and marine technology –             2010-11-15
                Ships launching air bag                                TC 31             Tyres, rims and valves

TC 20              Aircraft and space vehicles                         ISO 4223-1:      * Definitions of some terms used in     2010-11-16
                                                                       2002/DAmd 1        the tyre industry – Part 1: Pneumatic
ISO/DIS 10786 * Space systems – Structural                2010-11-16                      tyres – Amendment 1
                components and assemblies
                                                                       TC 34             Food products
TC 21              Equipment for fire protection
                                                                       ISO 9936:2006/    Animal and vegetable fats and oils – 2010-11-11
                   and fire fighting                                   DAmd 1            Determination of tocopherol and
                                                                                         tocotrienol contents by high-
ISO/DIS 7203-3 * Fire extinguishing media – Foam       2010-11-25
                                                                                         performance liquid
                 concentrates – Part 3: Specification
                                                                                         chromatography – Amendment 1
                 for low expansion foam concentrates
                 for top application to water-miscible                 ISO 15753:        Animal and vegetable fats and oils – 2010-11-11
                 liquids                                               2006/DAmd 1       Determination of polycyclic aromatic
                 (Revision of ISO 7203-3:1999)                                           hydrocarbons – Amendment 1

TC 22              Road vehicles                                       TC 35             Paints and varnishes
ISO/DIS 8854     * Road vehicles – Alternators with       2010-12-02   ISO/DIS 2431     * Paints and varnishes –                2010-11-18
                   regulators – Test methods and                                          Determination of flow time by use
                   general requirements                                                   of flow cups
                   (Revision of ISO 8854:1988)                                            (Revision of ISO 2431:1993,
                                                                                          ISO 2431:1993/Cor 1:1994,
ISO/DIS          * Road vehicles – Diagnostic          2010-11-29                         ISO 2431:1993/Cor 2:1999)
15765-1            communication over Controller Area
                   Network (DoCAN) – Part 1: General                   TC 45             Rubber and rubber products
                   information and use case definition
                   (Revision of ISO 15765-1:2004)                      ISO/DIS           Rubber – Determination of              2010-08-22
                                                                       11852.2           magnesium content of field and
ISO/DIS          * Road vehicles – Diagnostic             2010-11-29                     concentrated natural rubber latex
15765-2            communication over Controller                                         by titration
                   Area Network (DoCAN) – Part 2:
                   Transport protocol and network                      TC 61             Plastics
                   layer services
                                                                       ISO/DIS 1622-1    Plastics – Polystyrene (PS)          2010-11-11
                   (Revision of ISO 15765-2:2004)
                                                                                         moulding and extrusion materials –
TC 23              Tractors and machinery for                                            Part 1: Designation system and basis
                   agriculture and forestry                                              for specifications
                                                                                         (Revision of ISO 1622-1:1994)
ISO/DIS            Crop protection equipment – Spray 2010-11-23
24253-1            deposit tests of field crop sprayers –
                                                                       TC 71             Concrete, reinforced concrete
                   Part 1: Field deposit measurements                                    and pre-stressed concrete

ISO/DIS            Crop protection equipment – Spray 2010-11-23        ISO/DIS 28841 * Guidelines for simplified seismic        2010-11-16
24253-2            deposit tests of field crop sprayers –                              assessment and rehabilitation of
                   Part 2: Crop deposit measurements                                   concrete buildings



ISO Update, Supplement to ISO Focus -- July/August 2010                                                                                 5
ISO/DIS 28842 * Guidelines for simplified design of     2010-12-01    TC 131            Fluid power systems
                small reinforced concrete bridges
                                                                      ISO/DIS           Rotary shaft lip-type seals             2010-11-22
TC 91             Surface active agents                               16589-2           incorporating thermoplastic sealing
                                                                                        elements – Part 2: Vocabulary
ISO/DIS 4317     * Surface-active agents and           2010-11-09                       (Revision of ISO 16589-2:2001)
                   detergents – Determination of water
                   content – Karl Fischer method                      TC 138            Plastics pipes, fittings and
                   (Revision of ISO 4317:1991)                                          valves for the transport of
                                                                                        fluids
TC 92             Fire safety
                                                                      ISO/DIS 19892     Plastics piping systems – Systems 2010-11-17
ISO/DIS 16737     Fire safety engineering –             2010-12-01
                                                                                        for hot and cold water – Test method
                  Requirements governing algebraic
                                                                                        for leaktightness under vacuum
                  equations – Vent flows
                  (Revision of ISO 16737:2006)
                                                                      TC 146            Air quality
TC 106            Dentistry
                                                                      ISO/DIS           Workplace air – Determination of        2010-11-12
ISO 6360-2:       Dentistry – Number coding system      2010-11-11    15202-2           metals and metalloids in airborne
2004/DAmd 1       for rotary instruments – Part 2:                                      particulate matter by inductively
                  Shapes – Amendment 1                                                  coupled plasma atomic emission
                                                                                        spectrometry – Part 2: Sample
ISO/DIS           Dentistry – Rotary diamond            2010-08-18                      preparation
7711-2.2          instruments – Part 2: Dental discs                                    (Revision of ISO 15202-2:2001)
                  (Revision of ISO 7711-2:1992)
                                                                      ISO/DIS         * Indoor air – Part 19: Sampling          2010-11-29
TC 107            Metallic and other inorganic                        16000-19          strategy for moulds
                  coatings
                                                                      ISO/DIS         * Indoor air – Part 28: Determination of 2010-11-29
ISO/DIS 12679 * Thermal spraying –                      2010-11-22    16000-28          odour emissions from building
                Recommendations for thermal                                             products using test chambers
                spraying
                                                                      TC 176            Quality management and
TC 108            Mechanical vibration, shock                                           quality assurance
                  and condition monitoring
                                                                      ISO/DIS 19011     Guidelines for auditing management 2010-11-18
ISO 10326-1:     * Mechanical vibration – Laboratory    2010-11-11                      systems
1992/DAmd 2        method for evaluating vehicle seat                                   (Revision of ISO 19011:2002)
                   vibration – Part 1: Basic
                   requirements – Amendment 2                         TC 181            Safety of toys

TC 114            Horology                                            ISO 8124-1:     * Safety of toys – Part 1: Safety         2010-11-23
                                                                      2009/DAmd 1       aspects related to mechanical and
ISO/DIS 23160     Watch cases and accessories –         2010-11-09                      physical properties – Amendment 1
                  Tests of the resistance to wear,
                  scratching and impacts                              TC 190            Soil quality
                  (Revision of ISO 3160-3:1993)
                                                                      ISO/DIS 28901 * Soil quality – Guidance for burial of     2010-11-16
TC 115            Pumps                                                               animal carcasses to prevent
                                                                                      epidemics
ISO/DIS 9906.2    Rotodynamic pumps – Hydraulic         2010-08-11
                  performance acceptance tests –                      TC 198            Sterilization of health care
                  Grades 1, 2 and 3                                                     products
                  (Revision of ISO 9906:1999)
                                                                      ISO/DIS           Sterilization of health care products – 2010-08-25
TC 118            Compressors and pneumatic                           11137-2.2         Radiation – Part 2: Establishing the
                  tools, machines and                                                   sterilization dose
                  equipment                                                             (Revision of ISO 11137-2:2006)

ISO 20643:        Mechanical vibration – Hand-held       2010-12-02   TC 204            Intelligent transport systems
2005/DAmd 1       and hand-guided machinery –
                  Principles for evaluation of vibration              ISO/DIS 13183 * Intelligent transport systems –           2010-12-02
                  emission – Amendment 1:                                             Communications access for land
                  Accelerometer positions                                             mobiles (CALM) – CALM using
                                                                                      broadcast communications
TC 126            Tobacco and tobacco
                  products                                            TC 205            Building environment design

ISO/DIS 6565      Tobacco and tobacco products –        2010-11-22    ISO/DIS         * Building environment design –           2010-11-16
                  Draw resistance of cigarettes                       11855-1           Design, construction and operation
                  and pressure drop of filter rods –                                    of radiant heating and cooling
                  Standard conditions and                                               systems – Part 1: Definition,
                  measurement                                                           symbols, and comfort criteria
                  (Revision of ISO 6565:2002)




6                                                                                     ISO Update, Supplement to ISO Focus - July/August 2010
ISO/DIS          * Building environment design –          2010-11-16   ISO/IEC FCD     * Information technology – Colour      2010-10-24
11855-2            Design, construction and operation                  29103             photo test pages for measurement of
                   of radiant heating and cooling                                        ink cartridge yield for colour photo
                   systems – Part 2: Determination of                                    printing
                   the design heating and cooling
                   capacity                                            ISO/IEC FCD     * Software and systems engineering – 2010-10-22
                                                                       29148             Life cycle processes – Requirements
ISO/DIS          * Building environment design –      2010-11-16                         engineering
11855-4            Design, construction and operation
                   of radiant heating and cooling                      ISO/IEC FCD     * Systems and software engineering – 2010-10-17
                   systems – Part 4: Dimensioning and                  42010             Architectural description
                   calculation of the dynamic heating                                    (Revision of ISO/IEC 42010:2007)
                   and cooling capacity for thermo
                   active building systems (TABS)

TC 213             Dimensional and geometrical
                   product specifications and
                   verification
                                                                       FDIS circulated
ISO/DIS            Geometrical product specifications     2010-11-25
10360-9            (GPS) – Acceptance and
                   reverification tests for coordinate                 Period from 08 June to 05 July 2010
                   measuring machines (CMM) – Part                     These Final draft International Standards have been submitted to the
                   9: CMMs with multiple probing                       ISO member bodies for formal approval by the date shown
                   systems                                             *Available in English only

ISO/DIS            Geometrical product specifications 2010-11-25                                                                       Vote
25178-604          (GPS) – Surface texture: Areal –                                                                              terminates
                   Part 604: Nominal characteristics of
                   non-contact (coherence scanning                     TC 2              Fasteners
                   interferometry) instruments
                                                                       ISO/FDIS 225      Fasteners – Bolts, screws, studs and 2010-08-25
TC 218             Timber                                                                nuts – Symbols and descriptions of
                                                                                         dimensions
ISO/DIS 3129     * Wood – Sampling methods and            2010-12-01                     (Revision of ISO 225:1983)
                   general requirements for physical
                   and mechanical testing of small                     ISO/FDIS 12474 Hexagon socket head cap screws             2010-09-02
                   clear wood specimens                                               with metric fine pitch thread
                   (Revision of ISO 3129:1975)
                                                                       TC 6              Paper, board and pulps
TC 219             Floor coverings                                     ISO/FDIS          Paper and board – Determination         2010-08-26
                                                                       16532-3           of grease resistance – Part 3:
ISO/DIS          * Textile floor coverings – Production 2010-08-16
                                                                                         Turpentine test for voids in glassine
10361.2            of changes in appearance by means
                                                                                         and greaseproof papers
                   of Vettermann drum and hexapod
                   tumbler tester                                      TC 17             Steel
                   (Revision of ISO 10361:2000)
                                                                       ISO/FDIS 10332 Non-destructive testing of steel     2010-09-06
JTC 1              Information technology                                             tubes – Automated ultrasonic testing
                                                                                      of seamless and welded (except
ISO/IEC FCD      * Enhanced Terminal Accessibility        2010-09-27                  submerged arc-welded) steel tubes
12905              (ETA) using cardholder preference                                  for verification of hydraulic leak-
                   interface                                                          tightness as a substitution for the
                                                                                      hydraulic test
ISO/IEC          * Information technology – Coding        2010-10-08
                                                                                      (Revision of ISO 10332:1994)
14496-5:2001/      of audio-visual objects – Part 5:
PDAM 28            Reference software – Amendment                      TC 23             Tractors and machinery for
                   28: Reference software for LASeR                                      agriculture and forestry
                   adaptation tools
                                                                       ISO/FDIS 11839 Machinery for forestry – Glazing and 2010-08-28
ISO/IEC FCD      * Information technology – Personal     2010-09-29                   panel materials used in operator
18013-4            identification – ISO/IEC compliant                                 enclosures for protection against
                   driving licence – Part 4: Test method                              thrown sawteeth – Test method and
                   for Extended Access Protection                                     performance criteria
ISO/IEC FCD      * Information technology – Service   2010-10-28       ISO/FDIS          Tractors for agriculture and forestry – 2010-08-28
20000-2            management – Part 2: Code of                        26322-2           Safety – Part 2: Narrow-track and
                   practice                                                              small tractors
                   (Revision of ISO/IEC 20000-2:2005)                                    (Revision of ISO 4254-3:1992)

ISO/IEC FCD      * Information technology – Method for 2010-10-23      TC 27             Solid mineral fuels
29102              the determination of ink cartridge
                   yield for colour photo printing with                ISO/FDIS 29541 * Solid mineral fuels – Determination      2010-08-30
                   inkjet printers and multi-function                                   of total carbon, hydrogen and
                   devices that contain inkjet printer                                  nitrogen content – Instrumental
                   components                                                           method
                                                                                        (Revision of ISO/TS 12902:2001)



ISO Update, Supplement to ISO Focus -- July/August 2010                                                                                  7
TC 34            Food products                                        ISO/FDIS 6472     Rubber compounding ingredients –        2010-08-19
                                                                                        Symbols and abbreviated terms
ISO/FDIS        * Spices – Saffron (Crocus sativus     2010-08-28                       (Revision of ISO 6472:2004)
3632-2            L.) – Part 2: Test methods
                  (Revision of ISO/TS 3632-2:2003)                    ISO/FDIS          Rubber, vulcanized or             2010-08-31
                                                                      7619-1            thermoplastic – Determination of
ISO/FDIS 26642 Food products – Determination of        2010-08-16                       indentation hardness – Part 1:
               the glycaemic index (GI) and                                             Durometer method (Shore hardness)
               recommendation for food                                                  (Revision of ISO 7619-1:2004;
               classification                                                           ISO 7619-1:2004/Amd 1:2008)

TC 35            Paints and varnishes                                 ISO/FDIS          Rubber, vulcanized or                   2010-08-31
                                                                      7619-2            thermoplastic – Determination of
ISO/FDIS         Paints and varnishes –                2010-08-25
                                                                                        indentation hardness – Part 2:
12137-1          Determination of scratch
                                                                                        IRHD pocket meter method
                 resistance – Part 1: Method using
                                                                                        (Revision of ISO 7619-2:2004)
                 a curved stylus
                 (Revision of ISO 12137-1:1997,                       ISO 18752:   * Rubber hoses and hose                      2010-08-26
                 ISO 12137-1:1997/Cor 1:1998)                         2006/FDAmd 1 assemblies – Wire- or textile-
                                                                                     reinforced single-pressure types
ISO/FDIS         Paints and varnishes –                2010-08-25
                                                                                     for hydraulic applications –
12137-2          Determination of scratch
                                                                                     Specification – Amendment 1
                 resistance – Part 2: Method using
                 a pointed stylus                                     ISO/FDIS        * Elastomeric seismic-protection          2010-09-02
                 (Revision of ISO 12137-2:1997)                       22762-1           isolators – Part 1: Test methods
                                                                                        (Revision of ISO 22762-1:2005,
TC 37            Terminology and other                                                  ISO 22762-1:2005/Cor 1:2006)
                 language and content
                 resources                                            ISO/FDIS        * Elastomeric seismic-protection          2010-09-02
                                                                      22762-2           isolators – Part 2: Applications for
ISO/FDIS        * Language resource management – 2010-09-05                             bridges – Specifications
24614-1           Word segmentation of written texts –                                  (Revision of ISO 22762-2:2005,
                  Part 1: Basic concepts and general                                    ISO 22762-2:2005/Cor 1:2006)
                  principles
                                                                      ISO/FDIS        * Elastomeric seismic-protection          2010-09-02
TC 38            Textiles                                             22762-3           isolators – Part 3: Applications for
                                                                                        buildings – Specifications
ISO/FDIS         Textiles – Assessment of the            2010-09-02
                                                                                        (Revision of ISO 22762-3:2005,
12952-1          ignitability of bedding items – Part 1:
                                                                                        ISO 22762-3:2005/Cor 1:2006)
                 Ignition source: smouldering
                 cigarette                                            ISO/FDIS 28343 Rubber compounding ingredients – 2010-08-16
                 (Revision of ISO 12952-1:1998,                                      Process oils – Determination of glass
                 ISO 12952-2:1998)                                                   transition temperature by DSC
ISO/FDIS         Textiles – Assessment of the            2010-09-02   TC 58             Gas cylinders
12952-2          ignitability of bedding items – Part 2:
                 Ignition source: match-flame                         ISO/FDIS 13341 Transportable gas cylinders – Fitting 2010-08-25
                 equivalent                                                          of valves to gas cylinders
                 (Revision of ISO 12952-3:1998,                                      (Revision of ISO 13341:1997,
                 ISO 12952-4:1998)                                                   ISO 13341:1997/Cor 1:1998)

TC 43            Acoustics                                            TC 59             Building construction
ISO/FDIS         Acoustics – Audiometric test          2010-08-25     ISO/FDIS          Building construction – Jointing        2010-09-02
8253-1           methods – Part 1: Basic pure-tone                    8394-1            products – Part 1: Determination
                 air and bone conduction threshold                                      of extrudability of sealants
                 audiometry                                                             (Revision of ISO 8394:1988)
                 (Revision of ISO 6189:1983,
                 ISO 8253-1:1989)                                     ISO/FDIS          Building construction – Jointing        2010-09-02
                                                                      8394-2            products – Part 2: Determination
TC 44            Welding and allied processes                                           of extrudability of sealants using
                                                                                        standardized apparatus
ISO/FDIS 24034 Welding consumables – Solid wire        2010-09-02
                                                                                        (Revision of ISO 8394:1988)
               electrodes, solid wires and rods for
               fusion welding of titanium and                         TC 61             Plastics
               titanium alloys – Classification
               (Revision of ISO 24034:2005,                           ISO/FDIS 175      Plastics – Methods of test for the      2010-09-25
               ISO 24034:2005/Amd 1:2008)                                               determination of the effects of
                                                                                        immersion in liquid chemicals
TC 45            Rubber and rubber products                                             (Revision of ISO 175:1999)
ISO/FDIS 48      Rubber, vulcanized or                 2010-08-17     ISO/FDIS 15527 Plastics – Compression-moulded             2010-09-02
                 thermoplastic – Determination of                                    sheets of polyethylene (PE-UHMW,
                 hardness (hardness between 10
                                                                                     PE-HD) – Requirements and test
                 IRHD and 100 IRHD)                                                  methods
                 (Revision of ISO 48:2007,                                           (Revision of ISO 15527:2007)
                 ISO 48:2007/Cor 1:2009)




8                                                                                     ISO Update, Supplement to ISO Focus - July/August 2010
TC 67              Materials, equipment and                              TC 108           Mechanical vibration, shock
                   offshore structures for                                                and condition monitoring
                   petroleum, petrochemical and
                   natural gas industries                                ISO 18437-2: * Mechanical vibration and shock – 2010-08-30
                                                                         2005/FDAmd 1 Characterization of the dynamic
ISO/FDIS 21457 * Petroleum, petrochemical and            2010-08-11                     mechanical properties of visco-
                 natural gas industries – Materials                                     elastic materials – Part 2:
                 selection and corrosion control for oil                                Resonance method – Amendment 1
                 and gas production systems
                                                                         ISO 18437-3: * Mechanical vibration and shock –       2010-08-30
                                                                         2005/FDAmd 1 Characterization of the dynamic
TC 69              Applications of statistical
                                                                                        mechanical properties of visco-
                   methods                                                              elastic materials – Part 3: Cantilever
                                                                                        shear beam method – Amendment 1
ISO/FDIS           Guidelines for implementation of       2010-08-18
11462-2            statistical process control (SPC) –                   TC 118           Compressors and pneumatic
                   Part 2: Catalogue of tools and                                         tools, machines and
                   techniques
                                                                                          equipment
TC 76              Transfusion, infusion and                             ISO/FDIS         Hand-held non-electric power tools – 2010-09-02
                   injection equipment for                               11148-3          Safety requirements – Part 3: Drills
                   medical and pharmaceutical                                             and tappers
                   use
                                                                         ISO/FDIS         Hand-held non-electric power tools – 2010-09-02
ISO/FDIS           Injection equipment for medical        2010-09-11     11148-4          Safety requirements – Part 4: Non-
9187-1             use – Part 1: Ampoules for                                             rotary percussive power tools
                   injectables
                                                                         ISO/FDIS         Hand-held non-electric power tools – 2010-09-02
                   (Revision of ISO 9187-1:2006)
                                                                         11148-6          Safety requirements – Part 6:
                                                                                          Assembly power tools for threaded
ISO/FDIS           Injection equipment for medical        2010-09-11
                                                                                          fasteners
9187-2             use – Part 2: One-point-cut (OPC)
                   ampoules                                              TC 127           Earth-moving machinery
                   (Revision of ISO 9187-2:1993)
                                                                         ISO/FDIS 21507 Earth-moving machinery –                 2010-08-22
TC 92              Fire safety                                                          Performance requirements for non-
                                                                                        metallic fuel tanks
ISO/FDIS         * Reaction to fire tests – Ignitability of 2010-09-02                  (Revision of ISO 21507:2005)
11925-2            products subjected to direct
                   impingement of flame – Part 2:                        TC 138           Plastics pipes, fittings and
                   Single-flame source test                                               valves for the transport of
                   (Revision of ISO 11925-2:2002)                                         fluids

ISO/FDIS 12863 * Standard test method for assessing       2010-08-18     ISO/FDIS 13956 * Plastics pipes and fittings –          2010-09-02
                 the ignition propensity of cigarettes                                    Decohesion test of polyethylene (PE)
                                                                                          saddle fusion joints – Evaluation of
TC 106             Dentistry                                                              ductility of fusion joint interface by
                                                                                          tear test
ISO/FDIS 10873 Dentistry – Denture adhesives              2010-08-11
                                                                         ISO/FDIS 19899 * Plastics piping systems – Polyolefin 2010-08-18
ISO/FDIS 11609 Dentistry – Dentifrices –                  2010-08-11                      pipes and mechanical fitting
               Requirements, test methods and                                             assemblies – Test method for the
               marking                                                                    resistance to end load (AREL test)
               (Revision of ISO 11609:1995)
                                                                         TC 159           Ergonomics
ISO/FDIS 28399 Dentistry – Products for external          2010-08-11     ISO/FDIS 24500 Ergonomics – Accessible design –         2010-09-02
               tooth bleaching
                                                                                        Auditory signals for consumer
                                                                                        products
TC 107             Metallic and other inorganic
                   coatings                                              TC 163           Thermal performance and
                                                                                          energy use in the built
ISO/FDIS         * Vitreous and porcelain enamels –       2010-09-02                      environment
28706-5            Determination of resistance to
                   chemical corrosion – Part 5:                          ISO/FDIS        * Thermal insulation products –         2010-08-16
                   Determination of resistance to                        12575-1.2         Exterior insulating systems for
                   chemical corrosion in closed                                            foundations – Part 1: Specification
                   systems
                   (Revision of ISO 28706-5:2008)                        TC 172           Optics and photonics

ISO/FDIS         * Vitreous and porcelain enamels –      2010-09-02      ISO/FDIS         Optics and photonics – Preparation 2010-08-18
28721-4            Glass-lined apparatus for process                     10110-8          of drawings for optical elements and
                   plants – Part 4: Quality requirements                                  systems – Part 8: Surface texture;
                   for glass-lined flanged steel pipes                                    roughness and waviness
                   and flanged steel fittings                                             (Revision of ISO 10110-8:1997)




ISO Update, Supplement to ISO Focus -- July/August 2010                                                                                  9
ISO/FDIS 11382 Optics and photonics – Optical        2010-08-22     ISO/FDIS 26986 * Resilient floor coverings – Expanded 2010-08-11
               materials and components –                                            (cushioned) poly(vinyl chloride) floor
               Characterization of optical materials                                 covering – Specification
               used in the infrared spectral range
               from 0,78 m to 25 m                                  JTC 1            Information technology

ISO 14729:        Ophthalmic optics – Contact lens     2010-09-02   ISO/IEC FDIS    * Information technology –          2010-09-02
2001/FDAmd 1      care products – Microbiological                   1539-1            Programming languages – Fortran –
                  requirements and test methods for                                   Part 1: Base language
                  products and regimens for hygienic                                  (Revision of ISO/IEC TR 19767:
                  management of contact lenses –                                      2005; ISO/IEC 1539-1:2004;
                  Amendment 1                                                         ISO/IEC 1539-1:2004/Cor 1:2006,
                                                                                      ISO/IEC 1539-1:2004/Cor 2:2007,
TC 189            Ceramic tile                                                        ISO/IEC 1539-1:2004/Cor 3:2008,
                                                                                      ISO/IEC 1539-1:2004/Cor 4:2009)
ISO/FDIS        * Ceramic tiles – Grouts and           2010-08-25
13007-1           adhesives – Part 1: Terms,                        ISO/IEC FDIS    * Identification cards – Integrated      2010-08-28
                  definitions and specifications for                7816-1            circuit cards – Part 1: Cards with
                  adhesives                                                           contacts – Physical characteristics
                  (Revision of ISO 13007-1:2004,                                      (Revision of ISO/IEC 7816-1:1998,
                  ISO 13007-1:2004/Cor 1:2006)                                        ISO/IEC 7816-1:1998/Amd 1:2003)

ISO/FDIS        * Ceramic tiles – Grouts and           2010-08-28   ISO/IEC FDIS    * Identification cards – Test methods – 2010-08-09
13007-2           adhesives – Part 2: Test methods for              10373-3           Part 3: Integrated circuit cards with
                  adhesives                                                           contacts and related interface
                  (Revision of ISO 13007-2:2005,                                      devices
                  ISO 13007-2:2005/Cor 1:2007)                                        (Revision of ISO/IEC 10373-3:2001)

ISO/FDIS        * Ceramic tiles – Grouts and           2010-08-25   ISO/IEC FDIS    * Identification cards – Test methods – 2010-08-28
13007-3           adhesives – Part 3: Terms,                        10373-6           Part 6: Proximity cards
                  definitions and specifications for                                  (Revision of ISO/IEC 10373-6:2001,
                  grouts                                                              ISO/IEC 10373-6:2001/Amd 1:2007,
                  (Revision of ISO 13007-3:2004)                                      ISO/IEC 10373-6:2001/Amd 2:2003,
                                                                                      ISO/IEC 10373-6:2001/Amd 3:2006,
ISO/FDIS        * Ceramic tiles – Grouts and           2010-08-28                     ISO/IEC 10373-6:2001/Amd 5:2007,
13007-4           adhesives – Part 4: Test methods                                    ISO/IEC 10373-6:2001/Amd 4:2006)
                  for grouts
                  (Revision of ISO 13007-4:2005)                    ISO/IEC       * Information technology – Coding of 2010-09-02
                                                                    14496-26:2010/ audio-visual objects – Part 26: Audio
TC 206            Fine ceramics                                     FDAM 2          conformance – Amendment 2:
                                                                                    BSAC conformance for broadcasting
ISO/FDIS 10678 Fine ceramics (advanced ceramics, 2010-08-23
               advanced technical ceramics) –                       ISO/IEC FDIS    * Information technology – Radio      2010-08-17
               Determination of photocatalytic                      18000-6           frequency identification for item
               activity of surfaces in an aqueous                                     management – Part 6: Parameters
               medium by degradation of methylene                                     for air interface communications at
               blue                                                                   860 MHz to 960 MHz
                                                                                      (Revision of ISO/IEC 18000-6:2004,
TC 213            Dimensional and geometrical                                         ISO/IEC 18000-6:2004/Amd 1:2006)
                  product specifications and
                  verification                                      ISO/IEC FDIS    * Information technology – Computer 2010-08-22
                                                                    19775-2           graphics and image processing –
ISO/FDIS 3611     Geometrical product specifications 2010-08-11                       Extensible 3D (X3D) – Part 2: Scene
                  (GPS) – Dimensional measuring                                       access interface (SAI)
                  equipment: Micrometers for external                                 (Revision of ISO/IEC 19775-2:2004)
                  measurements – Design and
                  metrological characteristics
                  (Revision of ISO 3611:1978)

ISO/FDIS 9493     Geometrical product specifications 2010-09-02
                  (GPS) – Dimensional measuring
                  equipment: Dial test indicators (lever            Standards published
                  type) – Design and metrological
                  characteristics
                                                                    New International Standards published between 08 June and 05 July
TC 219            Floor coverings
                                                                    2010
ISO/FDIS 10582 * Resilient floor coverings –           2010-09-02   *Available in English only
                 Heterogeneous poly(vinyl chloride)                 ** French version of standard previously published in English only
                 floor coverings – Specification
                                                                                                                                    Price
ISO/FDIS 10595 * Resilient floor coverings – Semi-     2010-08-23                                                                  group
                 flexible/vinylcomposition (VCT)
                 poly(vinyl chloride) floor tiles –                 TC 4             Rolling bearings
                 Specification
                                                                    ISO 113:2010     Rolling bearings – Plummer block                  D
                                                                                     housings – Boundary dimensions



10                                                                                 ISO Update, Supplement to ISO Focus - July/August 2010
ISO 8443:2010      Rolling bearings – Radial ball bearings with    C   TC 59             Building construction
                   flanged outer ring – Flange dimensions
                                                                       ISO 10845-1:    * Construction procurement – Part 1:                XA
TC 10              Technical product documentation                     2010              Processes, methods and procedures

ISO 81714-1:       Design of graphical symbols for use in the      G   ISO 21930:2007 Sustainability in building construction –            M
2010               technical documentation of products – Part                         Environmental declaration of building
                   1: Basic rules                                                     products

                                                                       TC 67             Materials, equipment and offshore
TC 20              Aircraft and space vehicles
                                                                                         structures for petroleum,
ISO 22538-5:     * Space systems – Oxygen safety – Part 5:         E                     petrochemical and natural gas
2010               Operational and emergency procedures                                  industries

ISO 24113:2010 * Space systems – Space debris mitigation           G   ISO 13503-2:      Petroleum and natural gas industries –            N
                 requirements                                          2006**            Completion fluids and materials – Part 2:
                                                                                         Measurement of properties of proppants
TC 22              Road vehicles                                                         used in hydraulic fracturing and gravel-
                                                                                         packing operations
ISO 2575:2010      Road vehicles – Symbols for controls,           U
                   indicators and tell-tales                           ISO 13628-10:     Petroleum and natural gas industries –            W
                                                                       2005**            Design and operation of subsea production
ISO 6469-1:        Electrically propelled road vehicles – Safety   E                     systems – Part 10: Specification for bonded
2009**             specifications – Part 1: On-board                                     flexible pipe
                   rechargeable energy storage system
                                                                       ISO 15136-2:      Petroleum and natural gas industries –             T
                   (RESS)
                                                                       2006**            Progressing cavity pump systems for
ISO 6469-2:        Electrically propelled road vehicles – Safety   C                     artificial lift – Part 2: Surface-drive systems
2009**             specifications – Part 2: Vehicle operational
                                                                       TC 68             Financial services
                   safety means and protection against
                   failures                                            ISO/TR 14742: * Financial services – Recommendations on              P
                                                                       2010            cryptographic algorithms and their use
ISO 10681-1:     * Road vehicles – Communication on                B
2010               FlexRay – Part 1: General information and           TC 76             Transfusion, infusion and injection
                   use case definition                                                   equipment for medical and
                                                                                         pharmaceutical use
ISO 10681-2:     * Road vehicles – Communication on                V
2010               FlexRay – Part 2: Communication layer               ISO 22413:2010 Transfer sets for pharmaceutical                     G
                   services                                                           preparations – Requirements and test
                                                                                      methods
ISO 11026:2010 * Heavy commercial vehicles and buses –             F
                 Test method for roll stability – Closing-             TC 79             Light metals and their alloys
                 curve test
                                                                       ISO 2143:2010     Anodizing of aluminium and its alloys –           C
TC 24              Particle characterization including                                   Estimation of loss of absorptive power of
                   sieving                                                               anodic oxidation coatings after sealing –
                                                                                         Dye-spot test with prior acid treatment
TC 28              Petroleum products and lubricants
                                                                       ISO 2931:2010     Anodizing of aluminium and its alloys –           C
ISO 8216-1:        Petroleum products – Fuels (class F)            A                     Assessment of quality of sealed anodic
2010               classification – Part 1: Categories of marine                         oxidation coatings by measurement of
                   fuels                                                                 admittance

                                                                       ISO 3210:2010     Anodizing of aluminium and its alloys –           C
ISO 8217:2010      Petroleum products – Fuels (class F) –          N
                                                                                         Assessment of quality of sealed anodic
                   Specifications of marine fuels
                                                                                         oxidation coatings by measurement of the
                                                                                         loss of mass after immersion in phosphoric
TC 29              Small tools
                                                                                         acid/chromic acid solution
ISO 8695:2010      Tools for pressing – Punches –                  E   ISO 7599:2010 * Anodizing of aluminium and its alloys –              L
                   Nomenclature and terminology                                        General specifications for anodic oxidation
                                                                                       coatings on aluminium
TC 45              Rubber and rubber products
                                                                       TC 92             Fire safety
ISO 7231:2010      Polymeric materials, cellular, flexible –       F
                   Determination of air flow value at constant         ISO 14934-1:    * Fire tests – Calibration and use of heat flux     G
                   pressure-drop                                       2010              meters – Part 1: General principles

ISO 10638:2010 * Rubber – Identification of antidegradants         S   TC 104            Freight containers
                 by gas chromatography/mass spectrometry
                                                                       ISO/PAS 18186: * Freight containers – RFID cargo shipment            E
TC 46              Information and documentation                       2010             tag system

ISO 690:2010       Information and documentation –                 R   TC 106            Dentistry
                   Guidelines for bibliographic references and
                                                                       ISO 28158:2010 Dentistry – Integrated dental floss and              D
                   citations to information resources
                                                                                      handles




ISO Update, Supplement to ISO Focus -- July/August 2010                                                                                    11
TC 108            Mechanical vibration, shock and                    TC 164             Mechanical testing of metals
                  condition monitoring
                                                                     ISO 148-1:         Metallic materials – Charpy pendulum              M
ISO 2631-1:     * Mechanical vibration and shock –              XZ   2009**             impact test – Part 1: Test method
1997/Amd 1:       Evaluation of human exposure to whole-
2010              body vibration – Part 1: General                   TC 194             Biological evaluation of medical
                  requirements – Amendment 1                                            devices
ISO 2631-4:     * Mechanical vibration and shock –              XZ   TC 204             Intelligent transport systems
2001/Amd 1:       Evaluation of human exposure to whole-
2010              body vibration – Part 4: Guidelines for the        ISO 14813-5:     * Intelligent transport systems – Reference         P
                  evaluation of the effects of vibration and         2010               model architecture(s) for the ITS sector –
                  rotational motion on passenger and crew                               Part 5: Requirements for architecture
                  comfort in fixed-guideway transport                                   description in ITS standards
                  systems – Amendment 1: .
                                                                     ISO/TS           * Electronic fee collection – Application            L
TC 117            Fans                                               17575-1:2010       interface definition for autonomous
                                                                                        systems – Part 1: Charging
ISO 13349:2010 Fans – Vocabulary and definitions of             S
               categories                                            ISO/TS           * Electronic fee collection – Application           M
                                                                     17575-2:2010       interface definition for autonomous
TC 119            Powder metallurgy                                                     systems – Part 2: Communication and
ISO 4498:2010     Sintered metal materials, excluding            F                      connection to the lower layers
                  hardmetals – Determination of apparent
                  hardness and microhardness
                                                                     TC 211             Geographic information/Geomatics

TC 127            Earth-moving machinery                             ISO/TS 19130: * Geographic information - Imagery sensor             XB
                                                                     2010            models for geopositioning
ISO 9533:2010     Earth-moving machinery – Machine-             G
                  mounted audible travel alarms and forward          TC 213             Dimensional and geometrical
                  horns – Test methods and performance                                  product specifications and
                  criteria                                                              verification
TC 135            Non-destructive testing                            ISO 25178-601:     Geometrical product specifications (GPS) –         J
                                                                     2010               Surface texture: Areal – Part 601: Nominal
ISO 7963:         Non-destructive testing – Ultrasonic          E
                                                                                        characteristics of contact (stylus)
2006**            testing –- Specification for calibration
                                                                                        instruments
                  block No. 2
                                                                     ISO 25178-602:     Geometrical product specifications (GPS) –        P
TC 138            Plastics pipes, fittings and valves                2010               Surface texture: Areal – Part 602: Nominal
                  for the transport of fluids                                           characteristics of non-contact (confocal
ISO/TS 19911: * Plastics pipes and fittings – Format of a       B                       chromatic probe) instruments
2010            technical file for characterizing PE spigot
                                                                     ISO 25178-701:     Geometrical product specifications (GPS) –        M
                end fittings
                                                                     2010               Surface texture: Areal – Part 701:
TC 147            Water quality                                                         Calibration and measurement standards
                                                                                        for contact (stylus) instruments
ISO 11704:2010 Water quality – Measurement of gross              F
               alpha and beta activity concentration in              TC 215             Health informatics
               non-saline water – Liquid scintillation
               counting method                                       ISO 21549-8:       Health informatics – Patient healthcard           E
                                                                     2010               data – Part 8: Links
ISO/TS 13530:     Water quality – Guidance on analytical        R
2009**            quality control for chemical and                   TC 216             Footwear
                  physicochemical water analysis
                                                                     ISO 10765:2010 Footwear – Test method for the                        D
TC 150            Implants for surgery                                              characterization of elastic materials –
                                                                                    Tensile performance
ISO 8637:2010 * Cardiovascular implants and                      J
                extracorporeal systems – Haemodialysers,             ISO 10768:2010 Footwear – Test method for the                        C
                haemodiafilters, haemofilters and                                   determination of the resistance of elastic
                haemoconcentrators                                                  materials for footwear to repeated
                                                                                    extension – Fatigue resistance
ISO 8638:2010 * Cardiovascular implants and                     G
                extracorporeal systems – Extracorporeal              JTC 1              Information technology
                blood circuit for haemodialysers,
                haemodiafilters and haemofilters                     ISO/IEC 9798-1: * Information technology – Security                   F
                                                                     2010              techniques – Entity authentication – Part 1:
ISO 13960:2010 * Cardiovascular implants and                    E                      General
                 extracorporeal systems – Plasmafilters
                                                                     ISO/IEC TR       * Information technology – Radio frequency          N
TC 163            Thermal performance and energy                     18047-7:2010       identification device conformance test
                  use in the built environment                                          methods – Part 7: Test methods for active
ISO 12567-1:    * Thermal performance of windows and            U                       air interface communications at 433 MHz
2010              doors – Determination of thermal
                                                                     ISO/IEC 20060: * Information technology – Open Terminal             XB
                  transmittance by the hot-box method – Part
                                                                     2010             Architecture (OTA) – Virtual machine
                  1: Complete windows and doors



12                                                                                    ISO Update, Supplement to ISO Focus - July/August 2010
ISO/IEC       * Information technology – Multimedia              W    ISO 11565:2006
21000-19:2010 framework (MPEG-21) – Part 19: Media
                Value Chain Ontology                                  ISO 16673:2007

                                                                      ISO 19813:2006
ISO/IEC          * Information technology – Multimedia           XZ
23000-9:2008/      application format (MPEG-A) – Part 9:              TC 23               Tractors and machinery for agriculture
Amd 2:2010         Digital Multimedia Broadcasting application                            and forestry
                   format – Amendment 2: Harmonization on
                   MPEG-2 TS storage                                  ISO 3767-3:1995     (reconfirmed)

ISO/IEC 29157: * Information technology –                        S    ISO 3767-5:1992     (reconfirmed)
2010             Telecommunications and information
                                                                      ISO 3776-1:2006
                 exchange between systems – PHY/MAC
                 specifications for short-range wireless              ISO 5008:2002
                 low-rate applications in the ISM band
                                                                      ISO 7914:2002

                                                                      ISO 11448:1997      (reconfirmed)

                                                                      ISO/TS 28924:2007

                                                                      TC 29               Small tools
                                                                      ISO 6789:2003

Standards confirmed                                                   TC 33               Refractories
                                                                      ISO 21587-1:2007
The following International Standards are confirmed for a five year   ISO 21587-2:2007
period:
                                                                      ISO 21587-3:2007
TC 17                 Steel
                                                                      TC 35               Paints and varnishes
ISO 439:1994          (reconfirmed)
                                                                      ISO 591-1:2000      (reconfirmed)
ISO 1052:1982         (reconfirmed)
                                                                      ISO 787-3:2000      (reconfirmed)
ISO 4934:2003
                                                                      ISO 787-8:2000      (reconfirmed)
ISO 4935:1989         (reconfirmed)
                                                                      ISO 1248:2006
ISO 4941:1994         (reconfirmed)
                                                                      ISO 1249:1974       (reconfirmed)
ISO 4952:2006
                                                                      ISO 2495:1995       (reconfirmed)
ISO 9034:1987         (reconfirmed)
                                                                      ISO 3262-1:1997     (reconfirmed)
ISO 9556:1989         (reconfirmed)
                                                                      ISO 3262-10:2000 (reconfirmed)
ISO 9647:1989         (reconfirmed)
                                                                      ISO 3262-11:2000 (reconfirmed)
ISO 10697-2:1994 (reconfirmed)
                                                                      ISO 3262-13:1997 (reconfirmed)
ISO 10698:1994        (reconfirmed)
                                                                      ISO 3262-14:2000 (reconfirmed)
ISO 10701:1994        (reconfirmed)
                                                                      ISO 3262-15:2000 (reconfirmed)
ISO 13899-2:2005
                                                                      ISO 3262-16:2000 (reconfirmed)
ISO 15349-2:1999 (reconfirmed)
                                                                      ISO 3262-17:2000 (reconfirmed)
ISO 15351:1999        (reconfirmed)
                                                                      ISO 3262-18:2000 (reconfirmed)
ISO 15355:1999        (reconfirmed)
                                                                      ISO 3262-19:2000 (reconfirmed)
ISO 24314:2006
                                                                      ISO 3262-2:1998     (reconfirmed)
TC 20                 Aircraft and space vehicles
                                                                      ISO 3262-20:2000 (reconfirmed)
ISO 44:1975           (reconfirmed)
                                                                      ISO 3262-21:2000 (reconfirmed)
TC 22                 Road vehicles                                   ISO 3262-3:1998     (reconfirmed)
ISO 3412:1992         (reconfirmed)                                   ISO 3262-4:1998     (reconfirmed)
ISO 3553-1:1987       (reconfirmed)                                   ISO 3262-5:1998     (reconfirmed)
ISO 4024:1992         (reconfirmed)                                   ISO 3262-6:1998     (reconfirmed)
ISO 6518-1:2002                                                       ISO 3262-7:1998     (reconfirmed)
ISO 6550-1:1994       (reconfirmed)                                   ISO 3262-8:1999     (reconfirmed)
ISO 6550-2:1994       (reconfirmed)                                   ISO 3262-9:1997     (reconfirmed)
ISO 6856:2005



ISO Update, Supplement to ISO Focus -- July/August 2010                                                                       13
ISO 3549:1995       (reconfirmed)                         TC 94               Personal safety – Protective clothing
ISO 10601:2007
                                                                              and equipment
                                                          ISO 11393-6:2007
TC 38               Textiles
ISO 1805:2006                                             TC 108              Mechanical vibration, shock and
                                                                              condition monitoring
TC 45               Rubber and rubber products
                                                          ISO 18431-4:2007
ISO 1306:1995       (reconfirmed)
                                                          TC 112              Vacuum technology
ISO 1437:2007
                                                          ISO 2861-1:1974     (reconfirmed)
ISO 1795:2007
                                                          ISO 3529-2:1981     (reconfirmed)
ISO 5796:2000       (reconfirmed)
                                                          ISO 3529-3:1981     (reconfirmed)
ISO 7664:2000       (reconfirmed)
                                                          TC 118              Compressors and pneumatic tools,
TC 46               Information and documentation
                                                                              machines and equipment
ISO 23081-1:2006
                                                          ISO 3857-2:1977     (reconfirmed)
TC 54               Essential oils
                                                          TC 121              Anaesthetic and respiratory equipment
ISO/TR 11018:1997
                                                          ISO 5361-4:1987     (reconfirmed)
ISO/TR 21092:2004
                                                          ISO 5362:2006
TC 60               Gears
                                                          ISO 7396-1:2007
ISO 1122-2:1999     (reconfirmed)
                                                          ISO 10083:2006
TC 61               Plastics
                                                          TC 131              Fluid power systems
ISO 60:1977         (reconfirmed)
                                                          ISO 4400:1994       (reconfirmed)
ISO 308:1994        (reconfirmed)
                                                          ISO 5596:1999       (reconfirmed)
ISO 1268-3:2000     (reconfirmed)
                                                          ISO 6952:1994       (reconfirmed)
ISO 2114:2000       (reconfirmed)
                                                          ISO 8778:2003
ISO 2577:2007

ISO 3374:2000       (reconfirmed)
                                                          TC 138              Plastics pipes, fittings and valves for
                                                                              the transport of fluids
ISO 3672-1:2000     (reconfirmed)
                                                          ISO/TS 10839:2000 (reconfirmed)
ISO 3672-2:2000     (reconfirmed)
                                                          ISO 13845:2000      (reconfirmed)
ISO 4614:1977       (reconfirmed)
                                                          ISO 13846:2000      (reconfirmed)
ISO 8989:1995       (reconfirmed)
                                                          ISO 14236:2000      (reconfirmed)
ISO 9771:1995       (reconfirmed)
                                                          TC 147              Water quality
ISO 11567:1995      (reconfirmed)
                                                          ISO 8192:2007
ISO 13002:1998      (reconfirmed)
                                                          ISO/TS 11370:2000 (reconfirmed)
ISO 15100:2000      (reconfirmed)
                                                          ISO/TR 11905-2:     (reconfirmed)
ISO 21318:2007
                                                          1997
TC 76               Transfusion, infusion and injection
                                                          ISO/TR 13843:2000
                    equipment for medical and
                    pharmaceutical use                    ISO/TR 15462:2006

ISO 8536-12:2007                                          ISO 17858:2007

TC 85               Nuclear energy                        TC 163              Thermal performance and energy use
ISO 9005:2007
                                                                              in the built environment

ISO 17874-5:2007                                          ISO 15099:2003

ISO 20553:2006                                            TC 184              Automation systems and integration

ISO 21482:2007                                            ISO 15745-5:2007

TC 89               Wood-based panels                     TC 202              Microbeam analysis
ISO 12465:2007                                            ISO 22489:2006

TC 92               Fire safety                           TC 219              Floor coverings
ISO/TS 16733:2006                                         ISO 2424:2007
ISO/TS 19700:2007



14                                                                        ISO Update, Supplement to ISO Focus - July/August 2010
JTC 1                 Information technology
ISO 2382-12:1988 (reconfirmed)                            Meeting calendar
ISO 2382-3:1987       (reconfirmed)

ISO 9660:1988         (reconfirmed)                       (update at 05 July 2010)
                                                          Meetings called for the month of August are not repeated in this
ISO/IEC 1539-3:       (reconfirmed)
                                                          edition.
1999
                                                          * Information definite but meeting not yet formally convened
ISO/IEC 2382-1:       (reconfirmed)                       ** Provisional
1993

ISO/IEC 2382-23:      (reconfirmed)
                                                          August 2010
1994                                                      1-2   Washington, D.C        TC 11        Boilers and pressure
                                                                (USA)                               vessels
ISO/IEC 2382-27:      (reconfirmed)
1994                                                      10-12 Vancouver              TC 243       Project Committee:
                                                                (Canada)                            Consumer product safety
ISO/IEC 9899:1999 (reconfirmed)
                                                          15-20 Dublin (Ireland)       TC 37 and SC Terminology and other
ISO/IEC 11756:        (reconfirmed)
                                                                                                    language and content
1999
                                                                                                    resources
ISO/IEC 13210:        (reconfirmed)
                                                          23-26 Astana                 TC 20/SC 1   Aircraft and space
1999
                                                                (Kazakhstan)                        vehicles/Aerospace
ISO/IEC 15851:        (reconfirmed)                                                                 electrical requirements
1999
                                                          23-27 Italy                  JTC 1/SC 35 Information technology/
ISO/IEC 16509:        (reconfirmed)                                                                User interfaces
1999
                                                          27    Geneva                 TC 154       Processes, data elements
ISO/IEC 18009:        (reconfirmed)                             (Switzerland)                       and documents in
1999                                                                                                commerce, industry and
                                                                                                    administration
ISO/IEC TR 19767:
2005                                                      30    Mexico (Mexico)        TC 189       Ceramic tile

ISO/IEC TR 24718:                                         August-September 2010
2005
                                                          30-2 Europe                  TC 23/SC 17 Tractors and machinery
                                                                                                   for agriculture and
                                                                                                   forestry/Manually portable
                                                                                                   forest machinery

                                                          September 2010
                                                          2-6   Beijing (China)        TC 218       Timber

Standards withdrawn                                       6-12 State College
                                                               (USA)
                                                                                   *   JTC 1/SC 36 Information technology/
                                                                                                   Information technology for
                                                                                                   learning, education and
                                                                                                   training
Period from 08 June to 05 July 2010
                                                          7     Paris (France)         TC 21/SC 3   Equipment for fire
TC 46              Information and documentation                                                    protection and fire
                                                                                                    fighting/Fire detection and
ISO 690-2:1997     (replaced by ISO 690:2010)
                                                                                                    alarm systems
TC 92              Fire safety                            7-8   Beijing (China)        TC 17        Steel
ISO/TS             (replaced by ISO 14934-1:2010)         7-8   Milan (Italy)      *   TC 79/SC 2   Light metals and their
14934-1:2002                                                                                        alloys/Organic and anodic
                                                                                                    oxidation coatings on
TC 108             Mechanical vibration, shock and                                                  aluminium
                   condition monitoring
                                                          8     Beijing (China)    *   TC 17/SC 16 Steel/Steels for the
ISO 10056:2001 (replaced by ISO 2631-4:2001/Amd 1:2010)                                            reinforcement and
                                                                                                   prestressing of concrete

                                                          8-9   Paris (France)         TC 21/SC 8   Equipment for fire
                                                                                                    protection and fire
                                                                                                    fighting/Gaseous media
                                                                                                    and firefighting systems
                                                                                                    using gas

                                                          8-17 Prague (Czech       *   TC 213       Dimensional and
                                                               Republic)                            geometrical product
                                                                                                    specifications and
                                                                                                    verification



ISO Update, Supplement to ISO Focus -- July/August 2010                                                                       15
9     Beijing (China)       TC 17/SC 15 Steel/Railway rails and       16    Florida (USA)         TC 150/SC 7 Implants for surgery/
                                        their fasteners                                                       Tissue-engineered
                                                                                                              medical products
9     Beijing (China)       TC 17/SC 16 Steel/Steels for the
                                        reinforcement and             17    Ulm (Germany)         TC 123        Plain bearings
                                        prestressing of concrete
                                                                      18    Oslo (Norway)     *   COUNCIL       Council
10    Tokyo (Japan)         JTC 1/SC 34 Information technology/
                                        Document description and      20-22 Beijing (China)       TC 26         Copper and copper alloys
                                        processing languages
                                                                      20-23 Copenhagen            TC 34/SC 17 Food products/
10    Beijing (China)       TC 17/SC 7   Steel/Methods of testing           (Denmark)                         Management systems for
                                         (other than mechanical                                               food safety
                                         tests and chemical
                                         analysis)                    20-23 Boulder (USA)     *   TC 164/SC 4 Mechanical testing of
                                                                                                              metals/Toughness
10    Paris (France)        TC 21/SC 6   Equipment for fire                                                   testing – Fracture (F),
                                         protection and fire                                                  Pendulum (P), Tear (T)
                                         fighting/Foam and powder
                                         media and fixed              20-24 Cartagena de      ** TC 71 and SC Concrete, reinforced
                                         firefighting systems using         Indias                            concrete and pre-stressed
                                         foam and powder                    (Colombia)                        concrete

13-14 Oslo (Norway)     *   TMB          Technical Management         20-24 London (United        TC 108/SC 4 Mechanical vibration,
                                         Board                              Kingdom)                          shock and condition
                                                                                                              monitoring/Human
13-15 Ottawa (Canada)       JTC 1/SC 22 Information technology/
                                                                                                              exposure to mechanical
                                        Programming languages,
                                                                                                              vibration and shock
                                        their environments and
                                        system software               20-24 London (United        TC 108/SC 5 Mechanical vibration,
                                        interfaces                          Kingdom)                          shock and condition
                                                                                                              monitoring/Condition
13-17 Bangkok           *   TC 61 and SC Plastics
                                                                                                              monitoring and
      (Thailand)
                                                                                                              diagnostics of machines
13-17 Orlando (USA)     ** TC 150        Implants for surgery
                                                                      20-24 Guangzhou         ** TC 198         Sterilization of health care
13-17 Orlando (USA)         TC 150/SC 4 Implants for surgery/Bone           (China)                             products
                                        and joint replacements
                                                                      21-23 New Delhi (India) *   GA            General Assembly
13-17 Victoria              TC 165       Timber structures
      (Canada)                                                        21-23 Boulder (USA)     *   TC 164/SC 5 Mechanical testing of
                                                                                                              metals/Fatigue testing
14-15 Florida (USA)         TC 150/SC 5 Implants for surgery/
                                        Osteosynthesis and spinal     22    Courbevoie,           TC 29/SC 8    Small tools/Tools for
                                        devices                             Paris (France)                      pressing and moulding

14-16 Shanghai              TC 54        Essential oils               22-23 Boulder (USA)         TC 164/SC 2 Mechanical testing of
      (China)                                                                                                 metals/Ductility testing

14-17 Shanghai              TC 59/SC 8   Building construction/       22-24 Unknown           ** JTC 2          Joint Project Committee -
      (China)                            Jointing products                                                      Energy efficiency and
                                                                                                                renewable energy
14-17 Tokyo (Japan)         TC 172/SC 5 Optics and photonics/                                                   sources - Common
                                        Microscopes and
                                                                                                                terminology
                                        endoscopes
                                                                      23    Lahaina, Hawaii       TC 146/SC 1 Air quality/Stationary
15    Ulm (Germany)         TC 123/SC 2 Plain bearings/Materials
                                                                            (USA)                             source emissions
                                        and lubricants, their
                                        properties,                   23    Lahaina, Hawaii *     TC 146/SC 2 Air quality/Workplace
                                        characteristics, test               (USA)                             atmospheres
                                        methods and testing
                                        conditions                    23    Lahaina, Hawaii *     TC 146/SC 3 Air quality/Ambient
                                                                            (USA)                             atmospheres
15    Ulm (Germany)         TC 123/SC 3 Plain bearings/
                                        Dimensions, tolerances        23    Lahaina, Hawaii       TC 146/SC 4 Air quality/General
                                        and construction details            (USA)                             aspects
15-17 Oslo (Norway)     *   GA           General Assembly             23    Lahaina, Hawaii *     TC 146/SC 5 Air quality/Meteorology
                                                                            (USA)
16    Ulm (Germany)         TC 123/SC 5 Plain bearings/Quality
                                        analysis and assurance        23    Lahaina, Hawaii       TC 146/SC 6 Air quality/Indoor air
16    Ulm (Germany)         TC 123/SC 6 Plain bearings/Terms and            (USA)
                                        common items
                                                                      23    Boulder (USA)         TC 164/SC 1 Mechanical testing of
16    Orlando (USA)         TC 150/SC 2 Implants for surgery/                                                 metals/Uniaxial testing
                                        Cardiovascular implants
                                        and extracorporeal            More information: ISO Online
                                        systems                       www.iso.org/iso/meeting_calendar



16                                                                                    ISO Update, Supplement to ISO Focus - July/August 2010

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:156
posted:9/28/2011
language:English
pages:16