CMD Commands hacking by khushbunishad

VIEWS: 138,355 PAGES: 10

									CMD Commands , Also Used For Hacking Into Victims System

Useful Things to do on CMD! First, open your Network Connection and right click and select Properties. Then Select TCP/IP and click on Properties again. Now Click on Advanced and WINS tab. Select Default for NeBIOS. Now back to the main Local Area Connection window, select File and Print Sharing for Microsoft Networks and hit enter. This is just to make sure you have NetBIOS enabled. We will have some fun with NetBIOS on CMD. First thing you need to know is some very helpfull commands to use on CMD(Command Prompt). In case you don't know how to get CMD open in your box, then click on Start, then Run, then type "cmd" (no quotes, off course... you know the drill). Back to commands: Quote: nslookup net view net use net user ping tracert arp route nbtstat netstat ipconfig

In case you don't know some of them, then just type the command on CMD and hit enter. A little help will show up in your screen. Read it and understand what the command does. Lets start easy... 1) ping : This command will allow you to know if the host you pinging is alive, which means if it is up at the time of executing the "ping" command. ping x.x.x.x (x is the IP address) or ping ( is the website you want to ping, but you don't know the IP) OBS: Keep in mind that if the host you pinging is blocking ICMP packets, then the result will be host down.

2) nslookup : This command has many functionalities. One is for resolving DNS into IP. Lets say you know the website URL but you don't know its IP(and you want to find out). nslookup Code: ( is the website you want to find out the IP) Now, another really nice function of nslookup is to find out IP of specific Mail Severs. nslookup (enter) set type=mx (enter) This command will give you the mail server IP of You can use whatever server you want and if it is listed on DNS, then you get the IP. Simple, isn't it? OK, now why would you want to have an IP of a mail server? To send spoofed mail to your friends or even for SE. In case you looking for "How to spoof email", then look for my "How to spoof email tutorial" Code: 3) tracert : This command will give you the hops that a packet will travel to reach its final destination. OBS: This command is good to know the route a packet takes before it goes to the target box. tracert x.x.x.x (x is the IP address) or tracert ( is the website you don't know the IP) 4) arp : This command will show you the arp table. This is good to know if someone is doing arp poisoning in your LAN. arp -a 5) route : This command will show you the routing table, gateway, interface and metric. route print 6) ipconfig : This command will show tons of very helpful things. Your IP, gateway, dns in use. ipconfig or ipconfig /all this command will give all that info but for all networks you might have it. Also, in case you have a dynamic IP and want to change it, then type... ipconfig /release (this will release your IP)

ipconfig /renew (this will renew your iP) OBS: Keep in mind that those commands will change your IP, but the new IP will still be tighed up to you. So don't do anything stupid. 7) netstat : This command will show you connection to your box. netstat or netstat -a (this will show you all the listening ports and connection with DNS names) netstat -n (this will show you all the open connection with IP addresses) netstat -an (this will combined both of the above) 8)nbtstat : This command will show you the netbios name of the target box. nbtstat -A x.x.x.x (x is the IP address) nbtstat -a computername

net view x.x.x.x or computername (will list the available sharing folders on the target box)

Now some hints: net use \ipaddressipc$ "" /user:administrator (this command will allow you to connect to the target box as administrator) Now if you want to connect to the target box and browse the entire C drive, then use this command: net use K: \computernameC$ (this will create a virtual drive on your "my computer" folder) OBS: Keep in mind that this will only works if the target box doesn't have an administrator password set. More info on NetBIOS hack look on my tutorial here: Code:

And least but not last, the "help" command. whatevercommand /help or whatevercommand /?

Author by :- Manish Nishad E-Mail:- Web Site:-

Command Help…..!!

 C:\>nslookup *** Default servers are not available Server: UnKnown Address: *** UnKnown can't find /?: No response from server

 C:\>net view The syntax of this command is:

NET VIEW [\\computername [/CACHE] | /DOMAIN[:domainname]] NET VIEW /NETWORK:NW [\\computername]

 C:\>net use The syntax of this command is:

NET USE [devicename | *] [\\computername\sharename[\volume] [password | *]] [/USER:[domainname\]username] [/USER:[dotted domain name\]username] [/USER:[username@dotted domain name] [/SMARTCARD] [/SAVECRED] [[/DELETE] | [/PERSISTENT:{YES | NO}]] NET USE {devicename | *} [password | *] /HOME NET USE [/PERSISTENT:{YES | NO}]

 C:\>net user The syntax of this command is:

NET USER [username [password | *] [options]] [/DOMAIN] username {password | *} /ADD [options] [/DOMAIN] username [/DELETE] [/DOMAIN]

 Usage: ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count] [-s count] [[-j host-list] | [-k host-list]] [-w timeout] target_name

Options: -t

-a -n count -l size -f -i TTL -v TOS -r count -s count -j host-list -k host-list -w timeout

Ping the specified host until stopped. To see statistics and continue - type Control-Break; To stop - type Control-C. Resolve addresses to hostnames. Number of echo requests to send. Send buffer size. Set Don't Fragment flag in packet. Time To Live. Type Of Service. Record route for count hops. Timestamp for count hops. Loose source route along host-list. Strict source route along host-list. Timeout in milliseconds to wait for each reply.

 C:\>tracert Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name Options: -d Do not resolve addresses to hostnames. -h maximum_hops Maximum number of hops to search for target. -j host-list Loose source route along host-list. -w timeout Wait timeout milliseconds for each reply.

 C:\>arp Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP). ARP -s inet_addr eth_addr [if_addr] ARP -d inet_addr [if_addr] ARP -a [inet_addr] [-N if_addr] -a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. Same as -a. Specifies an internet address. Displays the ARP entries for the network interface specified by if_addr. Deletes the host specified by inet_addr. inet_addr may be wildcarded with * to delete all hosts. Adds the host and associates the Internet address inet_addr with the Physical address eth_addr. The Physical address is given as 6 hexadecimal bytes separated by hyphens. The entry is permanent. Specifies a physical address. If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used.

-g inet_addr -N if_addr -d -s

eth_addr if_addr

Example: > arp -s 00-aa-00-62-c6-09 .... Adds a static entry. > arp -a .... Displays the arp table.

 C:\>route Manipulates network routing tables. ROUTE [-f] [-p] [command [destination] [MASK netmask] [gateway] [METRIC metric] [IF interface] -f Clears the routing tables of all gateway entries. If this is used in conjunction with one of the commands, the tables are cleared prior to running the command. When used with the ADD command, makes a route persistent across boots of the system. By default, routes are not preserved



destination MASK netmask gateway interface METRIC

when the system is restarted. Ignored for all other commands, which always affect the appropriate persistent routes. This option is not supported in Windows 95. One of these: PRINT Prints a route ADD Adds a route DELETE Deletes a route CHANGE Modifies an existing route Specifies the host. Specifies that the next parameter is the 'netmask' value. Specifies a subnet mask value for this route entry. If not specified, it defaults to Specifies gateway. the interface number for the specified route. specifies the metric, ie. cost for the destination.

All symbolic names used for destination are looked up in the network database file NETWORKS. The symbolic names for gateway are looked up in the host name database file HOSTS. If the command is PRINT or DELETE. Destination or gateway can be a wildcard, (wildcard is specified as a star '*'), or the gateway argument may be omitted. If Dest contains a * or ?, it is treated as a shell pattern, and only matching destination routes are printed. The '*' matches any string, and '?' matches any one char. Examples: 157.*.1, 157.*, 127.*, *224*. Diagnostic Notes: Invalid MASK generates an error, that is when (DEST & MASK) != DEST. Example> route ADD MASK IF 1 The route addition failed: The specified mask parameter is invalid. (Destination & Mask) != Destination. Examples: > route > route PRINT ADD MASK METRIC 3 IF 2 destination^ ^mask ^gateway metric^ ^ Interface^ If IF is not given, it tries to find the best interface for a given gateway. > route PRINT > route PRINT 157* .... Only prints those matching 157* > route CHANGE MASK METRIC 2 IF 2 CHANGE is used to modify gateway and/or metric only. > route PRINT > route DELETE > route PRINT

C:\>nbtstat Displays protocol statistics and current TCP/IP connections using NBT (NetBIOS over TCP/IP). NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n] [-r] [-R] [-RR] [-s] [-S] [interval] ]

Lists the remote machine's name table given its name Lists the remote machine's name table given its IP address. -c (cache) Lists NBT's cache of remote [machine] names and their IP addresses -n (names) Lists local NetBIOS names. -r (resolved) Lists names resolved by broadcast and via WINS -R (Reload) Purges and reloads the remote cache name table -S (Sessions) Lists sessions table with the destination IP addresses -s (sessions) Lists sessions table converting destination IP addresses to computer NETBIOS names. -RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refresh RemoteName IP address interval Remote host machine name. Dotted decimal representation of the IP address. Redisplays selected statistics, pausing interval seconds between each display. Press Ctrl+C to stop redisplaying statistics.

-a (adapter status) -A (Adapter status)

 C:\>netstat Displays protocol statistics and current TCP/IP network connections. NETSTAT -a -b [-a] [-b] [-e] [-n] [-o] [-p proto] [-r] [-s] [-v] [interval] Displays all connections and listening ports. Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions.

-e -n -o -p proto

-r -s



Displays Ethernet statistics. This may be combined with the –s option. Displays addresses and port numbers in numerical form. Displays the owning process ID associated with each connection. Shows connections for the protocol specified by proto; proto may be any of: TCP, UDP, TCPv6, or UDPv6. If used with the -s option to display per-protocol statistics, proto may be any of: IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6. Displays the routing table. Displays per-protocol statistics. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6; the -p option may be used to specify a subset of the default. When used in conjunction with -b, will display sequence of components involved in creating the connection or listening port for all executables. Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once.

 C:\>ipconfig USAGE: ipconfig

[/? | /all | /renew [adapter] | /release [adapter] | /flushdns | /displaydns | /registerdns | /showclassid adapter | /setclassid adapter [classid] ]

where adapter

Connection name (wildcard characters * and ? allowed, see examples)

Options: /? /all /release /renew /flushdns /registerdns /displaydns /showclassid /setclassid

Display this help message Display full configuration information. Release the IP address for the specified adapter. Renew the IP address for the specified adapter. Purges the DNS Resolver cache. Refreshes all DHCP leases and re-registers DNS names Display the contents of the DNS Resolver Cache. Displays all the dhcp class IDs allowed for adapter. Modifies the dhcp class id.

The default is to display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address leases for all adapters bound to TCP/IP will be released or renewed. For Setclassid, if no ClassId is specified, then the ClassId is removed. Examples: > ipconfig > ipconfig /all > ipconfig /renew > ipconfig /renew EL* > ipconfig /release *Con*

... Show information. ... Show detailed information ... renew all adapters ... renew any connection that has its name starting with EL ... release all matching connections, eg. "Local Area Connection 1" or "Local Area Connection 2"


To top