iso_update_sept-2011_e

Document Sample
iso_update_sept-2011_e Powered By Docstoc
					International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International
Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been
reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The
DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft
International Standard (FDIS), the approval criteria remaining the same.




CD registered

Period from 01 August to 31 August 2011

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.



TC 8                      Ships and marine technology

ISO/NP 13643-5            Ships and marine technology — Manoeuvring of ships
                          — Part 5: Submarine specials

ISO/CD 13643-6            Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials

ISO/NP 16145-4            Ships and marine technology — Protective coatings and inspection method — Part 4: Measuring method of water
                          soluble salts

TC 10                     Technical product documentation

ISO/CD 11540-1            Writing and marking instruments — Part 1: Specification for caps to reduce the risk of asphyxiation

ISO/CD 11540-2            Writing and marking instruments — Part 2: Specification for end closures to reduce the risk of asphyxiaton

TC 20                     Aircraft and space vehicles

ISO/CD 16697              Space systems — Safety and compatibility of materials - Method to determine the flammability thresholds of materials

ISO/CD 16698              Methods for estimation of future geomagnetic activity

TC 21                     Equipment for fire protection and fire fighting

ISO 7240-                 Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1
24:2010/CD Amd 1

TC 33                     Refractories

ISO/CD 5017               Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity

TC 38                     Textiles

ISO/CD 20743              Textiles — Determination of antibacterial activity of antibacterial finished products

TC 42                     Photography
ISO/CD 22028-2     Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and
                   interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)

TC 44              Welding and allied processes

ISO/CD 669         Resistance welding — Resistance welding equipment — Mechanical and electrical requirements

ISO/CD 5826        Resistance welding equipment — Transformers — General specifications applicable to all transformers

TC 86              Refrigeration and air-conditioning

ISO/WD 16345       Water-cooling towers — Testing and rating of thermal performance

TC 96              Cranes

ISO/CD 17440       Cranes — General Design — Limit states and proof of competence of forged hooks

TC 121             Anaesthetic and respiratory equipment

ISO/WD 16571       Medical gas systems - Systems for evacuation of plume generated by medical devices

TC 130             Graphic technology

ISO/CD 12647-4     Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints
                   — Part 4: Publication gravure printing

TC 131             Fluid power systems

ISO/NP 7241-1      Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements

TC 156             Corrosion of metals and alloys

ISO 8044:1999/CD   Corrosion of metals and alloys — Basic terms and definitions — Amendment 1
Amd 1

TC 157             Non-systemic contraceptives and STI barrier prophylactics

ISO/CD 4074        Natural latex rubber condoms — Requirements and test methods

TC 159             Ergonomics

ISO/CD 9241-391    Ergonomics of Human System Interaction — Part 391: Requirements, analysis and compliance test methods for the
                   reduction of photosensitive seizures

TC 163             Thermal performance and energy use in the built environment

ISO/NP 15758       Hygrothermal performance of building equipment and industrial installations — Calculation of water vapour diffusion —
                   Cold pipe insulation systems

TC 168             Prosthetics and orthotics

ISO/CD 16955       Quantification of physical parameters of ankle foot devices and foot units

TC 173             Assistive products for persons with disability

ISO/NP 7176-22     Wheelchairs — Part 22: Set-up procedures

TC 198             Sterilization of health care products

ISO 15883-         Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1
1:2006/CD Amd 1

TC 201             Surface chemical analysis

ISO/CD 13083       Definition and calibration of the spatial resolution of electrical scanning-probe microscopes (ESPMs) such as SSRM and
                   SCM for 2D-dopant imaging and other purposes

TC 217             Cosmetics
ISO/NP TR 14735               Cosmetics - Minimising and determining nitrosamines in cosmetics

JTC 1                         Information technology

ISO/IEC NP 14165-             Information technology — Fibre Channel — Part 243: Backbone-3 (FC-BB-3)
243

ISO/IEC 14496-                Information technology — Coding of audio-visual objects — Part 16: Animation Framework eXtension (AFX) —
16/PDAM 2                     Amendment 2: Multi-resolution 3D mesh compression

ISO/IEC 15444-                Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 6: Updated
1:2004/PDAM 6                 ICC profile support and resolution clarification

ISO/IEC CD 23000-             Information technology — Multimedia application format (MPEG-A) — Part 10: Video surveillance application format
10

ISO/IEC CD 23005-1            Information technology — Media context and control — Part 1: Architecture

ISO/IEC CD 23005-2            Information technology — Media context and control — Part 2: Control information

ISO/IEC CD 23005-3            Information technology — Media context and control — Part 3: Sensory information

ISO/IEC CD 23005-4            Information technology — Media context and control — Part 4: Virtual world object characteristics

ISO/IEC CD 23005-5            Information technology — Media context and control — Part 5: Data formats for interaction devices

ISO/IEC CD 23005-6            Information technology — Media context and control — Part 6: Common types and tools

ISO/IEC 19794-                Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conformance
14/PDAM 1                     Testing Methodology




DIS circulated

Period from 01 August to 31 August 2011

These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only


                                                                                                                                  Vote terminates

IIW                            International Institute of Welding

ISO/DIS 14346            *     Welding — Static design procedure for hollow section joints                                            2012-01-23

TC 8                           Ships and marine technology

ISO/DIS 16548                  Ships and marine technology — Ship design — General guidance on emergency towing                       2012-01-24
                               procedure

TC 17                          Steel

ISO/DIS 13270            *     Steel fibres for concrete — Definitions and specifications                                             2012-01-18

TC 22                          Road vehicles
ISO/DIS 6550-3    *   Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing —     2012-01-17
                      Part 3: M10 glow-plugs

                      (Revision of ISO 6550-3:2009)

ISO/DIS 16750-3   *   Road vehicles — Environmental conditions and testing for electrical and electronic equipment —    2012-01-13
                      Part 3: Mechanical loads

                      (Revision of ISO 16750-3:2007)

TC 23                 Tractors and machinery for agriculture and forestry

ISO/DIS 4254-1    *   Agricultural machinery — Safety — Part 1: General requirements                                    2012-01-05

                      (Revision of ISO 4254-1:2008)

TC 29                 Small tools

ISO/DIS 513       *   Classification and application of hard cutting materials for metal removal with defined cutting   2012-01-16
                      edges — Designation of the main groups and groups of application

                      (Revision of ISO 513:2004)

TC 35                 Paints and varnishes

ISO/DIS 1524          Paints, varnishes and printing inks — Determination of fineness of grind                          2012-01-05

                      (Revision of ISO 1524:2000)

TC 42                 Photography

ISO/DIS 12234-1       Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model        2012-01-10

                      (Revision of ISO 12234-1:2007)

TC 44                 Welding and allied processes

ISO/DIS 16338     *   Welding for aerospace applications — Resistance spot and seam welding                             2012-01-23

TC 48                 Laboratory equipment

ISO/DIS 6556      *   Laboratory glassware — Filter flasks                                                              2012-01-26

                      (Revision of ISO 6556:1981)

TC 58                 Gas cylinders

ISO/DIS 19078     *   Gas cylinders — Inspection of the cylinder installation, and requalification of high pressure     2012-01-03
                      cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

                      (Revision of ISO 19078:2006)

TC 61                 Plastics

ISO/DIS 11963     *   Plastics — Polycarbonate sheets — Types, dimensions and characteristics                           2012-01-12

                      (Revision of ISO 11963:1995)

ISO/DIS 13106     *   Plastics — Blow-moulded polypropylene containers for packaging of liquid foodstuffs               2012-01-20

ISO/DIS 13636     *   Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets             2012-01-12

TC 85                 Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 8300      *   Nuclear fuel technology — Determination of plutonium content in plutonium dioxide of nuclear      2012-01-23
                      grade quality — Gravimetric method
                      (Revision of ISO 8300:1987)

ISO/DIS 8425      *   Nuclear fuel technology — Determination of plutonium in pure plutonium nitrate solutions —        2012-01-23
                      Gravimetric method
                      (Revision of ISO 8425:1987)

TC 92                 Fire safety

ISO/DIS 12468-1   *   External exposure of roofs to fire — Part 1: Test method                                          2012-01-17
                        (Revision of ISO 12468-1:2003)

TC 94                   Personal safety -- Protective clothing and equipment

ISO                 *   Protective clothing for protection against chemicals — Classification, labelling and performance       2012-01-27
16602:2007/DAmd 1       requirements — Amendment 1

ISO/DIS 16900-1.3       Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of         2011-10-27
                        inward leakage

ISO/DIS 16900-11    *   Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of        2012-01-27
                        field of vision

TC 96                   Cranes

ISO/DIS 16625       *   Cranes and hoists — Selection of wire ropes, drums and sheaves                                         2012-01-24
                        (Revision of ISO 4308-2:1988, ISO 8087:1985, ISO 4308-1:2003)

ISO/DIS 15442           Cranes — Safety requirements for loader cranes                                                         2012-01-16

                        (Revision of ISO 15442:2005)

TC 104                  Freight containers

ISO/DIS 1496-1      *   Series 1 freight containers — Specification and testing — Part 1: General cargo containers for         2012-01-18
                        general purposes
                        (Revision of ISO 1496-1:1990, ISO 1496-1:1990/Amd 2:1998, ISO 1496-1:1990/Amd 1:1993, ISO
                        1496-1:1990/Amd 3:2005, ISO 1496-1:1990/Amd 4:2006, ISO 1496-1:1990/Amd 5:2006)

TC 112                  Vacuum technology

ISO/DIS 14291       *   Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers                       2012-01-12

TC 113                  Hydrometry

ISO/DIS 4359            Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes                2012-01-18

                        (Revision of ISO 4359:1983, ISO 4359:1983/Cor 1:1999)

TC 120                  Leather

ISO                     Leather — Wet blue goat skins — Specification — Amendment 1                                            2012-01-16
5431:1999/DAmd 1

ISO                     Leather — Wet blue sheep skins — Specification — Amendment 1                                           2012-01-16
5432:1999/DAmd 1

ISO                     Leather — Bovine wet blue — Specification — Amendment 1                                                2012-01-16
5433:1999/DAmd 1

TC 122                  Packaging

ISO/DIS 18601       *   Packaging and the environment — General requirements for the use of ISO standards in the field         2012-01-03
                        of packaging and the environment

ISO/DIS 18602       *   Packaging and the environment — Optimization of the packaging system                                   2012-01-03

ISO/DIS 18603       *   Packaging and the environment — Reuse                                                                  2012-01-03

ISO/DIS 18604       *   Packaging and the environment — Material recycling                                                     2012-01-03

ISO/DIS 18605       *   Packaging and the environment — Energy recovery                                                        2012-01-03

ISO/DIS 18606       *   Packaging and the environment — Organic recycling                                                      2012-01-03

TC 123                  Plain bearings

ISO/DIS 13939           Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load   2012-01-24
                        capacity, friction coefficient and lifetime

TC 130                  Graphic technology
ISO/DIS 15339-1   *   Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles   2012-01-05
                      and characterized reference printing conditions

TC 131                Fluid power systems

ISO/DIS 14540     *   Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action               2012-01-05
                      couplings for use at a pressure of 72 MPa (720 bar)

ISO/DIS 14541     *   Hydraulic fluid power — Dimensions and requirements for screw-to-connect type quick-action          2012-01-05
                      couplings for general purpose

TC 138                Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 16422     *   Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance     2012-01-12
                      of water under pressure — Specifications
                      (Revision of ISO 16422:2006)

ISO/DIS 17484-1       Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum       2012-01-24
                      operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems
                      (Revision of ISO 17484-1:2006, ISO 17484-1:2006/Cor 1:2008)

TC 156                Corrosion of metals and alloys

ISO/DIS 7539-11       Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the    2012-01-26
                      resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

ISO/DIS 21601         Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion      2012-01-26
                      cracks detected in service

TC 172                Optics and photonics

ISO/DIS 10685-2   *   Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification —       2012-01-05
                      Part 2: Commercial information

ISO/DIS 10685-3   *   Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification —       2012-01-05
                      Part 3: Technical information

ISO/DIS 11979-1   *   Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary                                       2012-01-12

                      (Revision of ISO 11979-1:2006)

ISO/DIS 11979-3   *   Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods           2012-01-12

                      (Revision of ISO 11979-3:2006)

ISO 11979-        *   Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — Amendment 1          2012-01-12
4:2008/DAmd 1

TC 194                Biological evaluation of medical devices

ISO/DIS 10993-3   *   Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and      2012-01-05
                      reproductive toxicity

                      (Revision of ISO 10993-3:2003)

TC 199                Safety of machinery

ISO/DIS 13856-1   *   Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for        2012-01-26
                      design and testing of pressure-sensitive mats and pressure-sensitive floors

                      (Revision of ISO 13856-1:2001)

TC 206                Fine ceramics

ISO/DIS 13383-1   *   Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural                    2012-01-19
                      characterization — Part 1: Determination of grain size and size distribution

ISO/DIS 13383-2   *   Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural                    2012-01-19
                      characterization — Part 2: Determination of phase volume fraction by evaluation of micrographs
TC 213                    Dimensional and geometrical product specifications and verification

ISO/DIS 1938-1        *   Geometrical product specifications (GPS) - Dimensional measuring equipment — Part 1: Plain      2012-01-19
                          limit gauges of linear size

                          (Revision of ISO/R 1938:1971)

ISO/DIS 25178-70      *   Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Physical            2012-01-19
                          measurement standards

ISO/DIS 25178-603.2   *   Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal           2011-10-26
                          characteristics of non-contact (phase-shifting interferometric microscopy) instruments

JTC 1                     Information technology

ISO/IEC DIS 17568         Information technology — Telecommunications and information exchange between systems —          2012-01-09
                          Close proximity electric induction wireless communications

ISO/IEC DIS 17569         Information technology — Telecommunications and information exchange between systems —          2012-01-09
                          Procedure for the registration of assigned numbers for ISO/IEC 17568

ISO/IEC 10918-            Information technology — Digital compression and coding of continuous-tone still images:        2012-01-31
4:1999/DAmd 1             Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers,
                          SPIFF compression types and Registration Authorities (REGAUT) — Part 4: — Amendment 1:
                          Application specific marker list

ISO/IEC DIS 10918-6       Information technology — Digital compression and coding of continuous-tone still images:        2012-01-20
                          Application to printing systems — Part 6:

ISO/IEC 13818-            Information technology — Generic coding of moving pictures and associated audio information:    2012-01-17
1:2007/DAmd 7             Systems — Part 1: — Amendment 7: Signalling of stereoscopic video in MPEG-2 systems

ISO/IEC 14496-            Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 3:          2012-01-31
3:2009/DAmd 3             Transport of unified speech and audio coding (USAC)

ISO/IEC 14496-            Information technology — Coding of audio-visual objects — Part 5: Reference software —          2012-01-20
5:2001/DAmd 31            Amendment 31: Reference software for efficient representation of 3D meshes with multiple
                          attributes

ISO/IEC 14496-            Information technology — Coding of audio-visual objects — Part 22: Open Font Format —           2012-01-31
22:2009/DAmd 2            Amendment 2: Additional script and language tags

ISO/IEC 14496-            Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance —    2012-01-20
27:2009/DAmd 4            Amendment 4: Conformance for efficient representation of 3D meshes with multiple attributes

ISO/IEC DIS 14496-        Information technology — Coding of audio-visual objects — Part 28: Composite font               2012-01-20
28                        representation

ISO/IEC 15444-            Information technology — JPEG 2000 image coding system: Extensions — Part 2: —                  2012-01-31
2:2004/DAmd 4             Amendment 4: Block coder extension

ISO/IEC 23000-            Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music    2012-01-20
12:2010/DAmd 2            application format — Amendment 2: Compact representation of dynamic volume change and
                          audio equalization

ISO/IEC 23003-            Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding          2012-01-31
2:2010/DAmd 1             (SAOC) — Amendment 1: SAOC conformance

ISO/IEC 23003-            Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding          2012-01-31
2:2010/DAmd 2             (SAOC) — Amendment 2: SAOC reference software

ISO/IEC DIS 23006-1       Information technology — Multimedia service platform technologies — Part 1: Architecture        2012-01-23

                          (Revision of ISO/IEC CD 23006, ISO/IEC 23006-1:2011)

ISO/IEC DIS 23007-2       Information technology — Rich media user interfaces — Part 2: Advanced user interaction (AUI)   2012-01-20
                          interfaces

ISO/IEC DIS 29174-2       Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2:      2012-01-30
                          Registration procedures
                          (Revision of ISO/IEC CD 29174)
ISO/IEC DIS 2382-37            Information technology — Vocabulary — Part 37: Harmonized biometric vocabulary                     2012-01-09

ISO/IEC DIS 19794-             Information technology — Biometric data interchange formats — Part 11: Signature/sign              2012-01-31
11.2                           processed dynamic data

ISO/IEC DIS 29109-5            Information technology — Conformance testing methodology for biometric data interchange            2012-01-09
                               formats defined in ISO/IEC 19794 — Part 5: Face image data
                               (Revision of ISO/IEC 29109-5:2011)




FDIS circulated

Period from 01 August to 31 August 2011

These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown

* Available in English only



                                                                                                                               Vote terminates


TC 2                            Fasteners

ISO/FDIS 4753                 * Fasteners — Ends of parts with external ISO metric thread                                          2011-10-05




                                (Revision of ISO 4753:1999)


TC 6                            Paper, board and pulps

ISO/FDIS 2493-2               * Paper and board — Determination of resistance to bending — Part 2: Taber-type tester               2011-10-26

                                (Revision of ISO 2493:1992)


TC 21                           Equipment for fire protection and fire fighting

ISO/FDIS 15779                * Condensed aerosol fire extinguishing systems — Requirements and test methods for                   2011-10-13
                                components and system design, installation and maintenance — General requirements

TC 23                           Tractors and machinery for agriculture and forestry

ISO/FDIS 11783-4              * Tractors and machinery for agriculture and forestry — Serial control and communications data       2011-10-12
                                network — Part 4: Network layer
                                (Revision of ISO 11783-4:2001)

TC 34                           Food products

ISO/FDIS 14470                * Food irradiation — Requirements for the development, validation and routine control of the         2011-10-23
                                ionizing radiation used for the treatment of food

ISO/FDIS 7970                 * Wheat (Triticum aestivum L.) — Specification                                                       2011-10-13
                                (Revision of ISO 7970:2000)

ISO/FDIS 3972                 * Sensory analysis — Methodology — Method of investigating sensitivity of taste                      2011-10-04
                     (Revision of ISO 3972:1991)

TC 35                Paints and varnishes

ISO/FDIS 2431      * Paints and varnishes — Determination of flow time by use of flow cups                               2011-10-26
                     (Revision of ISO 2431:1993, ISO 2431:1993/Cor 1:1994, ISO 2431:1993/Cor 2:1999)

ISO/FDIS 7783      * Paints and varnishes — Determination of water-vapour transmission properties — Cup method           2011-10-19
                     (Revision of ISO 7783-1:1996, ISO 7783-2:1999, ISO 7783-1:1996/Cor 1:1998)

TC 38                Textiles

ISO/FDIS 2959      * Textiles — Woven fabric descriptions                                                                2011-10-12
                     (Revision of ISO 2959:1973)

TC 41                Pulleys and belts (including veebelts)

ISO/FDIS 254       * Belt drives — Pulleys — Quality, finish and balance                                                 2011-10-27
                     (Revision of ISO 254:1998)

TC 45                Rubber and rubber products

ISO/FDIS 34-2      * Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test   2011-10-23
                     pieces
                     (Revision of ISO 34-2:2007)

ISO/FDIS 1827      * Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid          2011-10-27
                     plates — Quadruple-shear methods
                     (Revision of ISO 1827:2007)

ISO/FDIS 2921      * Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-                2011-10-04
                     retraction procedure (TR test)
                     (Revision of ISO 2921:2005)

ISO/FDIS 7267-3    * Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones               2011-10-25
                     method
                     (Revision of ISO 7267-3:2007)

ISO/FDIS 13226     * Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on           2011-10-13
                     vulcanized rubbers
                     (Revision of ISO 13226:2005)

ISO/FDIS 124       * Latex, rubber — Determination of total solids content                                               2011-11-01
                     (Revision of ISO 124:2008)

ISO/FDIS 2475      * Chloroprene rubber (CR) — General-purpose types — Evaluation procedure                              2011-10-13
                     (Revision of ISO 2475:1999, ISO 2475:1999/Cor 1:2001, ISO 2475:1999/Amd 1:2005)

ISO/FDIS 8511      * Rubber compounding ingredients — Carbon black — Determination of pellet size distribution           2011-10-06
                     (Revision of ISO 8511:1995)

ISO/FDIS 11852     * Rubber — Determination of magnesium content of field and concentrated natural rubber latex by       2011-10-16
                     titration

TC 46                Information and documentation

ISO/FDIS 30300     * Information and documentation — Management systems for records — Fundamentals and                   2011-10-16
                     vocabulary

ISO/FDIS 30301     * Information and documentation — Management systems for records — Requirements                       2011-10-16

TC 59                Buildings and civil engineering works

ISO/FDIS 21929-1   * Sustainability in building construction — Sustainability indicators — Part 1: Framework for the     2011-10-24
                     development of indicators and a core set of indicators for buildings
                      (Revision of ISO/TS 21929-1:2006)

TC 61                 Plastics

ISO/FDIS 1043-1     * Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special                2011-10-12
                      characteristics
                      (Revision of ISO 1043-1:2001, ISO 1043-1:2001/DAmd 1.2)

ISO/FDIS 1043-2     * Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials               2011-10-12
                      (Revision of ISO 1043-2:2000)

ISO/FDIS 23559        Plastics — Film and sheeting — Guidance on the testing of thermoplastic films                      2011-10-30

                      (Revision of ISO 23559:2007)

TC 67                 Materials, equipment and offshore structures for petroleum, petrochemical and
                      natural gas industries

ISO 21809-          * Petroleum and natural gas industries — External coatings for buried or submerged pipelines used    2011-10-27
3:2008/FDAmd 1        in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1

ISO/FDIS 13503-1    * Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement       2011-10-12
                      of viscous properties of completion fluids
                      (Revision of ISO 13503-1:2003, ISO 13503-1:2003/Cor 1:2005)

ISO/FDIS 13706      * Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers                   2011-10-26
                      (Revision of ISO 13706:2005)

TC 85                 Nuclear energy, nuclear technologies, and radiological protection

ISO/FDIS 17874-3    * Remote handling devices for radioactive materials — Part 3: Electrical master-slave manipulators   2011-10-13

TC 92                 Fire safety

ISO 5658-           * Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport        2011-10-17
2:2006/FDAmd 1        products in vertical configuration — Amendment 1

TC 118                Compressors and pneumatic tools, machines and equipment

ISO/FDIS 11148-1    * Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for        2011-10-12
                      non-threaded mechanical fasteners

ISO/FDIS 11148-2    * Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping        2011-10-12
                      power tools

ISO/FDIS 11148-5    * Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills        2011-10-12

ISO/FDIS 11148-8    * Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers           2011-10-12

ISO/FDIS 11148-9    * Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders                    2011-10-12

ISO/FDIS 11148-10   * Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools        2011-10-12

ISO/FDIS 11148-11   * Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears            2011-10-12

TC 121                Anaesthetic and respiratory equipment

ISO/FDIS 8835-7     * Inhalational anaesthesia systems — Part 7: Anaesthetic systems for use in areas with limited       2011-10-18
                      logistical supplies of electricity and anaesthetic gases

TC 131                Fluid power systems

ISO/FDIS 15524      * Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar)          2011-10-19
                      series, bores from 20 mm to 100 mm

ISO/FDIS 4397       * Fluid power connectors and associated components — Nominal outside diameters of tubes and          2011-10-04
                      nominal hose sizes
                      (Revision of ISO 4397:1993)
ISO/FDIS 16873         * Hydraulic fluid power — Pressure switches — Mounting surfaces                                    2011-10-17
                         (Revision of ISO 16873:2002, ISO 16873:2002/Amd 1:2005)

TC 138                   Plastics pipes, fittings and valves for the transport of fluids

ISO/FDIS 11296-7       * Plastics piping systems for renovation of underground non-pressure drainage and sewerage         2011-10-03
                         networks — Part 7: Lining with spirally-wound pipes

ISO/FDIS 19892         * Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test        2011-10-17
                         method for the resistance of joints to pressure cycling

TC 147                   Water quality

ISO/FDIS 13162         * Water quality — Determination of carbon 14 activity — Liquid scintillation counting method       2011-10-06

TC 197                   Hydrogen technologies

ISO/FDIS 22734-2       * Hydrogen generators using water electrolysis process — Part 2: Residential applications          2011-10-27
                         (Revision of ISO/CD 22734)

TC 202                   Microbeam analysis

ISO/FDIS 13067         * Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size        2011-10-20

TC 215                   Health informatics

ISO/HL7 FDIS 27953-1   * Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 1:       2011-10-12
                         Framework for adverse event reporting

ISO/HL7 FDIS 27953-2   * Health informatics — Individual case safety reports (ICSRs) in pharmacovigilance — Part 2:       2011-10-12
                         Human pharmaceutical reporting requirements for ICSR

TC 223                   Societal security

ISO/FDIS 22320         * Societal security — Emergency management — Requirements for command and control                  2011-10-23

JTC 1                    Information technology

ISO/IEC FDIS 14908-1   * Interconnection of information technology equipment — Control network protocol — Part 1:         2011-10-02
                         Protocol stack

ISO/IEC FDIS 14908-2   * Interconnection of information technology equipment — Control network protocol — Part 2:         2011-10-02
                         Twisted pair communication

ISO/IEC FDIS 14908-3   * Interconnection of information technology equipment — Control network protocol — Part 3: Power   2011-10-02
                         line channel specification

ISO/IEC FDIS 14908-4   * Interconnection of information technology equipment — Control network protocol — Part 4: IP      2011-10-02
                         communication

ISO/IEC FDIS 16504     * Information technology — Telecommunications and information exchange between systems —           2011-10-23
                         MAC and PHY for operation in TV white space

ISO/IEC FDIS 14776-    * Information technology — Small Computer System Interface (SCSI) — Part 372: SCSI Enclosure       2011-10-03
372                      Services - 2 (SES-2)

ISO/IEC FDIS 9797-3    * Information technology — Security techniques — Message Authentication Codes (MACs) — Part        2011-10-04
                         3: Mechanisms using a universal hash-function

ISO/IEC FDIS 11770-5   * Information technology — Security techniques — Key management — Part 5: Group key                2011-10-24
                         management

ISO/IEC FDIS 18031     * Information technology — Security techniques — Random bit generation                             2011-10-06
                         (Revision of ISO/IEC 18031:2005, ISO/IEC 18031:2005/Cor 1:2009)

ISO/IEC FDIS 27007     * Information technology — Security techniques — Guidelines for information security management    2011-10-04
                         systems auditing

ISO/IEC FDIS 29128     * Information technology — Security techniques — Verification of cryptographic protocols           2011-10-17
ISO/IEC FDIS 29192-2          * Information technology — Security techniques — Lightweight cryptography — Part 2: Block             2011-10-27
                                ciphers

ISO/IEC FDIS 23005-7          * Information technology — Media context and control — Part 7: Conformance and reference              2011-10-04
                                software

ISO/IEC FDIS 15415            * Information technology — Automatic identification and data capture techniques — Bar code            2011-10-17
                                symbol print quality test specification — Two-dimensional symbols
                                (Revision of ISO/IEC 15415:2004, ISO/IEC 15415:2004/Cor 1:2008)

ISO/IEC FDIS 12785-2          * Information technology — Learning, education, and training — Content packaging — Part 2: XML        2011-10-24
                                binding




Standards published

New International Standards published between 01 August and 31 August 2011

* Available in English only

** French version of standard previously published in English only



                                                                                                                                    Price group

IIW                      International Institute of Welding

ISO 14271:2011           Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot,                     D
                         projection, and seam welds

TC 2                     Fasteners

ISO 1580:2011            Slotted pan head screws — Product grade A                                                                           C

ISO 2009:2011            Slotted countersunk flat head screws — Product grade A                                                              C

ISO 2010:2011            Slotted raised countersunk head screws — Product grade A                                                            C

ISO 4766:2011            Slotted set screws with flat point                                                                                  C

ISO 7045:2011            Pan head screws with type H or type Z cross recess — Product grade A                                                C

ISO 7046-1:2011          Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade                 C
                         A — Part 1: Steel screws of property class 4.8

ISO 7046-2:2011          Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade                 C
                         A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws

ISO 7047:2011            Raised countersunk head screws (common head style) with type H or type Z cross recess — Product                     C
                         grade A

TC 4                     Rolling bearings

ISO 12090-1:2011         Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions            H
                         and tolerances for series 1, 2 and 3
ISO 12090-2:2011      Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions       E
                      and tolerances for series 4 and 5

TC 6                  Paper, board and pulps

ISO 776:2011          Pulps — Determination of acid-insoluble ash                                                                    C

ISO 15320:2011        Pulp, paper and board — Determination of pentachlorophenol in an aqueous extract                               E

ISO 3781:2011         Paper and board — Determination of tensile strength after immersion in water                                   C

TC 8                  Ships and marine technology

ISO 21070:2011      * Ships and marine technology — Marine environment protection — Management and handling of                        J
                      shipboard garbage

ISO 13122:2011      * Ships and marine technology — Launching appliances for davit-launched liferafts                                E

ISO 14409:2011        Ships and marine technology — Ship launching air bags                                                           F

TC 10                 Technical product documentation

ISO 29845:2011      * Technical product documentation — Document types                                                               U

TC 20                 Aircraft and space vehicles

ISO 10795:2011      * Space systems — Programme management and quality — Vocabulary                                                  R

ISO 14620-2:2011    * Space systems — Safety requirements — Part 2: Launch site operations                                           H

TC 21                 Equipment for fire protection and fire fighting

ISO 7203-3:2011     * Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam                    R
                      concentrates for top application to water-miscible liquids

TC 22                 Road vehicles

ISO 12405-1:2011    * Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems   U
                      — Part 1: High-power applications

TC 23                 Tractors and machinery for agriculture and forestry

ISO 12809:2011        Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test              F
                      methods

ISO 8224-             Traveller irrigation machines — Part 1: Operational characteristics and laboratory and field test methods      XZ
1:2003/Amd 1:2011     — Amendment 1

ISO 24631-6:2011      Radiofrequency identification of animals — Part 6: Representation of animal identification information         C
                      (visual display/data transfer)

TC 28                 Petroleum products and lubricants

ISO 3405:2011         Petroleum products — Determination of distillation characteristics at atmospheric pressure                     R

ISO 18132-1:2011    * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for             L
                      automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine
                      carriers and floating storage

ISO 18132-3:2011    * Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for            M
                      automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on
                      board marine carriers and floating storage

TC 29                 Small tools

ISO 2238:2011         Machine bridge reamers                                                                                         C

ISO 6261:2011         Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation                           F

TC 31                 Tyres, rims and valves
ISO 4223-             Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1                  XZ
1:2002/Amd 1:2011

ISO 15222:2011        Truck and bus tyres — Method for measuring relative wet grip performance — Loaded new tyres                  K

TC 34                 Food products

ISO 3632-1:2011     * Spices — Saffron (Crocus sativus L.) — Part 1: Specification                                                 D

ISO                   Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods —        XZ
16140:2003/Amd        Amendment 1
1:2011

ISO 6493:2000         Animal feeding stuffs — Determination of starch content — Polarimetric method                                E

TC 35                 Paints and varnishes

ISO 4628-6:2011       Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of           C
                      defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking
                      by tape method

ISO 6272-1:2011       Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-     D
                      area indenter

ISO 6272-2:2011       Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-     C
                      area indenter

TC 37                 Terminology and other language and content resources

ISO 24614-2:2011    * Language resource management — Word segmentation of written texts — Part 2: Word segmentation for            S
                      Chinese, Japanese and Korean

TC 38                 Textiles

ISO 14184-1:2011      Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction        D
                      method)

ISO 14184-2:2011      Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method)           F

ISO/TR              * Textiles and textile products — Guidelines on the determination of the precision of a standard test method   H
24697:2011            by interlaboratory trials

TC 42                 Photography

ISO 3665:2011       * Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications             E

TC 44                 Welding and allied processes

ISO 10863:2011        Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD)   P

TC 45                 Rubber and rubber products

ISO                   Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses            XZ
4671:2007/Amd         and the lengths of hose assemblies — Amendment 1: Clarification of position at which outside diameter is
1:2011                measured

ISO                   Rubber or plastics hoses — Determination of volumetric expansion — Amendment 1: Deletion of alcohol          XZ
6801:1983/Amd         as pressurizing fluid
1:2011

ISO 1853:2011       * Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity                 E

ISO 5600:2011       * Rubber — Determination of adhesion to rigid materials using conical shaped parts                             D

ISO 5603:2011       * Rubber, vulcanized — Determination of adhesion to wire cord                                                  H

ISO 2303:2011         Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures                  G

ISO 5794-3:2011     * Rubber compounding ingredients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a         D
                      blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)
TC 46                Information and documentation

ISO 15511:2011       Information and documentation — International standard identifier for libraries and related organizations    D
                     (ISIL)

ISO 25964-1:2011   * Information and documentation — Thesauri and interoperability with other vocabularies — Part 1:              XC
                     Thesauri for information retrieval

ISO/TR 23081-      * Information and documentation — Managing metadata for records — Part 3: Self-assessment method               D
3:2011

TC 51                Pallets for unit load method of materials handling

ISO 13194:2011     * Box pallets — Principal requirements and test methods                                                         L

TC 61                Plastics

ISO 25762:2009       Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced   N
                     polymer composites

ISO 11357-3:2011     Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy       C
                     of melting and crystallization

ISO 11357-6:2008     Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time        F
                     (isothermal OIT) and oxidation induction temperature (dynamic OIT)

ISO 10640:2011       Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy                 N

ISO 4901:2011      * Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene             E
                     monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography

ISO 3598:2011        Textile glass — Yarns — Basis for a specification                                                             B

TC 69                Applications of statistical methods

ISO 3951-4:2011    * Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality      M
                     levels

ISO 13053-1:2011     Quantitative methods in process improvement — Six Sigma — Part 1: DMAIC methodology                           P

ISO 13053-2:2011     Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques                        T

TC 71                Concrete, reinforced concrete and pre-stressed concrete

ISO/TR               Guidelines for the repair of water-leakage cracks in concrete structures                                     H
16475:2011

TC 79                Light metals and their alloys

ISO 7599:2010        Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on               L
                     aluminium

ISO 11707:2011     * Magnesium and its alloys — Determination of lead and cadmium                                                 D

ISO 6361-1:2011    * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for         E
                     inspection and delivery

ISO 6361-2:2011    * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties           U

ISO 6361-3:2011    * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on            B
                     shape and dimensions

ISO 6361-4:2011    * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates:               F
                     Tolerances on shape and dimensions

ISO 6361-5:2011    * Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition            C

TC 83                Sports and recreational equipment

ISO 7795:2011        Cross-country skis — Ski-binding screws — Test methods                                                       C
TC 92                 Fire safety

ISO 12136:2011      * Reaction to fire tests — Measurement of material properties using a fire propagation apparatus                 T

ISO 19706:2011        Guidelines for assessing the fire threat to people                                                             F

TC 94                 Personal safety -- Protective clothing and equipment

ISO 27065:2011        Protective clothing — Performance requirements for protective clothing worn by operators applying liquid       J
                      pesticides

ISO 16900-4:2011    * Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter      H
                      capacity and migration, desorption and carbon monoxide dynamic testing

ISO/TS 16976-       * Respiratory protective devices — Human factors — Part 3: Physiological responses and limitations of            L
3:2011                oxygen and limitations of carbon dioxide in the breathing environment

TC 106                Dentistry

ISO                   Dentistry — Mercury and alloys for dental amalgam — Amendment 1: Requirements for marking and                 XZ
24234:2004/Amd        manufacturer's instructions concerning mercury
1:2011

ISO 1797-1:2011       Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals                                      E

ISO 7711-2:2011       Dentistry — Rotary diamond instruments — Part 2: Discs                                                         F

ISO 7494-1:2011       Dentistry — Dental units — Part 1: General requirements and test methods                                       D

TC 108                Mechanical vibration, shock and condition monitoring

ISO 16063-41:2011   * Methods for the calibration of vibration and shock transducers — Part 41: Calibration of laser vibrometers     S

TC 112                Vacuum technology

ISO 27893:2011      * Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by              H
                      direct comparison with a reference gauge

TC 121                Anaesthetic and respiratory equipment

ISO 80601-2-        * Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential               X
13:2011               performance of an anaesthetic workstation

TC 130                Graphic technology

ISO 15930-          * Graphic technology — Prepress digital data exchange using PDF — Part 8: Partial exchange of printing         free
8:2010/Cor 1:2011     data using PDF 1.6 (PDF/X-5) — Technical Corrigendum 1

TC 138                Plastics pipes, fittings and valves for the transport of fluids

ISO 9311-2:2011       Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength                           D

ISO 10147:2011        Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by       B
                      determination of the gel content

TC 142                Cleaning equipment for air and other gases

ISO 29464:2011      * Cleaning equipment for air and other gases — Terminology                                                       M

TC 146                Air quality

ISO 25139:2011        Stationary source emissions — Manual method for the determination of the methane concentration using           J
                      gas chromatography

TC 147                Water quality

ISO 18857-2:2009      Water quality — Determination of selected alkylphenols — Part 2: Gas chromatographic-mass                      J
                      spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples
                      following solid-phase extraction and derivatisation
TC 150               Implants for surgery

ISO 5834-2:2011    * Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 2: Moulded forms                    C

TC 155               Nickel and nickel alloys

ISO 22033:2011       Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric        F
                     method

TC 159               Ergonomics

ISO 26800:2011       Ergonomics — General approach, principles and concepts                                                     J

TC 160               Glass in building

ISO 12543-1:2011     Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of    D
                     component parts

ISO 12543-2:2011     Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass            C

ISO 12543-3:2011     Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass                   C

ISO 12543-4:2011     Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability       F

ISO 12543-5:2011     Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing     E

ISO 12543-6:2011     Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance                        C

TC 164               Mechanical testing of metals

ISO 12111:2011     * Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method           M

TC 172               Optics and photonics

ISO 9344:2011      * Microscopes — Graticules for eyepieces                                                                     B

ISO 10943:2011       Ophthalmic instruments — Indirect ophthalmoscopes                                                          B

ISO/TR 21254-      * Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Part 4:             K
4:2011               Inspection, detection and measurement

TC 173               Assistive products for persons with disability

ISO 24415-2:2011   * Tips for assistive products for walking — Requirements and test methods — Part 2: Durability of tips for   C
                     crutches

TC 201               Surface chemical analysis

ISO/TR             * Surface chemical analysis — Characterization of nanostructured materials                                   R
14187:2011

ISO 14701:2011     * Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide                H
                     thickness

TC 206               Fine ceramics

ISO 28703:2011     * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal-shock             C
                     resistance of porous ceramics

ISO 28704:2011     * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for cyclic bending            D
                     fatigue of porous ceramics at room temperature

TC 211               Geographic information/Geomatics

ISO 19110:2005       Geographic information — Methodology for feature cataloguing                                               U

TC 213               Dimensional and geometrical product specifications and verification

ISO 5459:2011        Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems              X
TC 215                Health informatics

ISO/HL7               Electronic Health Record-System Functional Model, Release 1.1                                              XD
10781:2009

TC 219                Floor coverings

ISO 10581:2011      * Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification                D

ISO 24343-2:2011    * Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2:    B
                      Short-term residual indentation of resilient floor covering

ISO 24343-3:2011    * Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3:    B
                      Indentation of resilient semi-flexible/vinyl composition tiles

TC 229                Nanotechnologies

ISO/TS              * Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near          K
10868:2011            infrared (UV-Vis-NIR) absorption spectroscopy

TC 234                Fisheries and aquaculture

ISO 12877:2011      * Traceability of finfish products — Specification on the information to be recorded in farmed finfish        S
                      distribution chains

TMB                   Technical Management Board

IWA 9:2011            Framework for managing sustainable development in business districts                                       N

JTC 1                 Information technology

ISO/IEC             * Information technology — W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)                  A
40210:2011

ISO/IEC             * Information technology — W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)                             A
40220:2011

ISO/IEC             * Information technology — W3C SOAP Message Transmission Optimization Mechanism                               A
40230:2011

ISO/IEC             * Information technology — W3C Web Services Addressing 1.0 — Core                                             A
40240:2011

ISO/IEC             * Information technology — W3C Web Services Addressing 1.0 — SOAP Binding                                     A
40250:2011

ISO/IEC             * Information technology — W3C Web Services Addressing 1.0 — Metadata                                         A
40260:2011

ISO/IEC             * Information technology — W3C Web Services Policy 1.5 — Framework                                            A
40270:2011

ISO/IEC             * Information technology — W3C Web Services Policy 1.5 — Attachment                                           A
40280:2011

ISO/IEC               Information technology — International string ordering and comparison — Method for comparing                S
14651:2011            character strings and description of the common template tailorable ordering

ISO/IEC             * Information technology — Telecommunications and information exchange between systems — Protocol            XK
18052:2011            for Computer Supported Telecommunications Applications (CSTA) Phase III

ISO/IEC 14143-      * Information technology — Software measurement — Functional size measurement — Part 2: Conformity           N
2:2011                evaluation of software size measurement methods to ISO/IEC 14143-1

ISO/IEC TR 24748-   * Systems and software engineering — Life cycle management — Part 2: Guide to the application of             W
2:2011                ISO/IEC 15288 (System life cycle processes)

ISO/IEC TR 24748-   * Systems and software engineering — Life cycle management — Part 3: Guide to the application of             XA
3:2011                ISO/IEC 12207 (Software life cycle processes)

ISO/IEC TR 29110-   * Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview                G
1:2011
ISO/IEC TR 29110-   * Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3: Assessment guide       C
3:2011

ISO/IEC 29341-14-   * Information technology — UPnP Device Architecture — Part 14-3: Audio Video Device Control Protocol        K
3:2011                — Level 3 — Media Server Device

ISO/IEC 29341-16-   * Information technology — UPnP Device Architecture — Part 16-1: Low Power Device Control Protocol —        Q
1:2011                Low Power Architecture

ISO/IEC 29341-17-   * Information technology — UPnP Device Architecture — Part 17-1: Quality of Service Device Control          R
1:2011                Protocol — Level 3 — Quality of Service Architecture

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-1: Remote Access Device Control               K
1:2011                Protocol — Remote Access Architecture

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-2: Remote Access Device Control               C
2:2011                Protocol — Remote Access Client Device

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-3: Remote Access Device Control               C
3:2011                Protocol — Remote Access Server Device

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-4: Remote Access Device Control               C
4:2011                Protocol — Remote Access Discovery Agent Device

ISO/IEC 29341-19-   * Information technology — UPnP Device Architecture — Part 19-1: Solar Protection Blind Device Control      B
1:2011                Protocol — Solar Protection Blind Device

ISO/IEC 29341-16-   * Information technology — UPnP Device Architecture — Part 16-10: Low Power Device Control Protocol         F
10:2011               — Low Power Proxy Service

ISO/IEC 29341-16-   * Information technology — UPnP Device Architecture — Part 16-11: Low Power Device Control Protocol         G
11:2011               — Low Power Service

ISO/IEC 29341-17-   * Information technology — UPnP Device Architecture — Part 17-11: Quality of Service Device Control         X
11:2011               Protocol — Level 3 — Quality of Service Manager Service

ISO/IEC 29341-17-   * Information technology — UPnP Device Architecture — Part 17-12: Quality of Service Device Control         P
12:2011               Protocol — Level 3 — Quality of Service Policy Holder Service

ISO/IEC 29341-17-   * Information technology — UPnP Device Architecture — Part 17-13: Quality of Service Device Control         H
13:2011               Protocol — Level 3 — Quality of Service Device Service — Underlying Technology Interfaces

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-10: Remote Access Device Control              G
10:2011               Protocol — Remote Access Inbound Connection Configuration Service

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-11: Remote Access Device Control              F
11:2011               Protocol — Remote Access Discovery Agent Service

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-12: Remote Access Device Control              K
12:2011               Protocol — Remote Access Discovery Agent Synchronization Service

ISO/IEC 29341-18-   * Information technology — UPnP Device Architecture — Part 18-13: Remote Access Device Control              S
13:2011               Protocol — Remote Access Transport Agent Configuration Service

ISO/IEC             * Information technology — Security techniques — Information security incident management                  W
27035:2011

ISO/IEC 24800-      * Information technology — JPSearch — Part 5: Data interchange format between image repositories            F
5:2011

ISO/IEC             * Information technology — Radio frequency identification (RFID) for item management — Application         W
24753:2011            protocol: encoding and processing rules for sensors and batteries

ISO/IEC 24754-      * Information technology — Document description and processing languages — Minimum requirements for       free
1:2008/Cor 1:2011     specifying document rendering systems — Part 1: Feature specifications for document rendering systems
                      — Technical Corrigendum 1

ISO/IEC 29500-      * Information technology — Document description and processing languages — Office Open XML File            XL
1:2011                Formats — Part 1: Fundamentals and Markup Language Reference

ISO/IEC 29500-      * Information technology — Document description and processing languages — Office Open XML File            XL
2:2011                Formats — Part 2: Open Packaging Conventions
ISO/IEC 29500-        * Information technology — Document description and processing languages — Office Open XML File   XL
3:2011                  Formats — Part 3: Markup Compatibility and Extensibility

ISO/IEC 29500-        * Information technology — Document description and processing languages — Office Open XML File   XL
4:2011                  Formats — Part 4: Transitional Migration Features




Standards confirmed

The following International Standards are confimred for a five year period:



TC 6                            Paper, board and pulps

ISO 22891:2007

TC 45                           Rubber and rubber products

ISO 7725:1991                   (reconfirmed)

TC 77                           Products in fibre reinforced cement

ISO 390:1993                    (reconfirmed)

TC 87                           Cork

ISO 2190:1998                   (reconfirmed)

TC 110                          Industrial trucks

ISO 22877:2004

ISO 22878:2004

ISO 22880:2004

ISO 22882:2004

ISO 22883:2004

ISO 22884:2004

TC 112                          Vacuum technology

ISO 1608-1:1993                 (reconfirmed)

ISO 1608-2:1989                 (reconfirmed)

ISO 3529-1:1981                 (reconfirmed)

ISO 3669:1986                   (reconfirmed)

ISO/TS 3669-2:2007

TC 131                          Fluid power systems

ISO 4392-3:1993                 (reconfirmed)

ISO 6403:1988                   (reconfirmed)
ISO 17559:2003

TC 146                        Air quality

ISO 10155:1995                (reconfirmed)

ISO 10780:1994                (reconfirmed)

ISO 4226:2007

TC 168                        Prosthetics and orthotics

ISO 8549-1:1989               (reconfirmed)

ISO 8549-2:1989               (reconfirmed)

ISO 8549-3:1989               (reconfirmed)

ISO 10328:2006

ISO 13404:2007

ISO 22523:2006

ISO 22675:2006

TC 171                        Document management applications

ISO 6200:1999                 (reconfirmed)

TC 195                        Building construction machinery and equipment

ISO 18650-1:2004

ISO 21573-1:2006

TC 222                        Personal financial planning

ISO 22222:2005

JTC 1                         Information technology

ISO/IEC 7942-1:1994           (reconfirmed)

ISO/IEC 8806-4:1991           (reconfirmed)

ISO/IEC 9637-1:1994           (reconfirmed)

ISO/IEC 9638-3:1994           (reconfirmed)

ISO/IEC 12087-2:1994          (reconfirmed)




Standards withdrawn

Period from 01 August to 31 August 2011


TC 34                   Food products
ISO/TS 3632-1:2003         (replaced by ISO 3632-1:2011)

TC 46                      Information and documentation

ISO 2788:1986              (replaced by ISO 25964-1:2011)

ISO 5964:1985              (replaced by ISO 25964-1:2011)

TC 112                     Vacuum technology

ISO/TS 27893:2009          (replaced by ISO 27893:2011)

TC 121                     Anaesthetic and respiratory equipment

ISO 8835-2:2007            (replaced by ISO 80601-2-13:2011)

ISO 8835-3:2007            (replaced by ISO 80601-2-13:2011)

ISO 8835-4:2004            (replaced by ISO 80601-2-13:2011)

ISO 8835-5:2004            (replaced by ISO 80601-2-13:2011)

IEC 60601-2-13:2003        (replaced by ISO 80601-2-13:2011)

TC 142                     Cleaning equipment for air and other gases

ISO 3649:1980              (replaced by ISO 29464:2011)

JTC 1                      Information technology

ISO/IEC TR                 (replaced by ISO/IEC TR 24748-3:2011)
15271:1998

ISO/IEC TR                 (replaced by ISO/IEC TR 24748-2:2011)
19760:2003

ISO/IEC TR                 (replaced by ISO/IEC 27035:2011)
18044:2004

ISO/IEC 29500-             (replaced by )
1:2008/Amd 1:2010

ISO/IEC 29500-             (replaced by )
4:2008/Amd 1:2010




Meeting calendar

(update at 01 August 2011)

Meetings called for the month of July are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional



September 2011

1-3       Kassel (Germany)           TC 180             Solar energy
2       Kassel (Germany)     TC 180/SC 4   Solar energy/Systems - Thermal performance, reliability and durability

7-9     Kobe (Japan)         TC 8/SC 1     Ships and marine technology/Lifesaving and fire protection

8       Paris (France)       TC 17/SC 7    Steel/Methods of testing (other than mechanical tests and chemical analysis)

8-9     Edinburgh (United    TC 24/SC 4    Particle characterization including sieving/Particle characterization
        Kingdom)

10-17   Shanghai (China)     JTC 1/SC 36   Information technology/Information technology for learning, education and training

12-14   Chicago (USA)        TC 205        Building environment design

12-16   Vienna (Austria)     TC 108/SC 4   Mechanical vibration, shock and condition monitoring/Human exposure to mechanical
                                           vibration and shock

12-16   Florianopolis        TC 150        Implants for surgery
        (Brazil)

12-16   London (United       TC 262        Project committee: Risk management
        Kingdom)

13      Florianopolis        TC 150/SC 1   Implants for surgery/Materials
        (Brazil)

13      Florianopolis        TC 150/SC 7   Implants for surgery/Tissue-engineered medical products
        (Brazil)

13-14   Florianopolis        TC 150/SC 5   Implants for surgery/Osteosynthesis and spinal devices
        (Brazil)

13-15   Moscow (Russian      TC 67         Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        Federation)                        industries

14      Geneva               TC 154        Processes, data elements and documents in commerce, industry and administration
        (Switzerland)

14      Brescia (Italy)      TC 201/SC 9   Surface chemical analysis/Scanning probe microscopy

14-15   Helsinki (Finland)   TC 17/SC 16   Steel/Steels for the reinforcement and prestressing of concrete

14-15   Chicago (USA)        TC 163        Thermal performance and energy use in the built environment

15      Florianopolis        TC 150/SC 2   Implants for surgery/Cardiovascular implants and extracorporeal systems
        (Brazil)

15      Florianopolis        TC 150/SC 4   Implants for surgery/Bone and joint replacements
        (Brazil)

15      Florianopolis        TC 150/SC 6   Implants for surgery/Active implants
        (Brazil)

15      Brescia (Italy)      TC 201/SC 1   Surface chemical analysis/Terminology

15      Brescia (Italy)      TC 201/SC 2   Surface chemical analysis/General procedures

15-17   Brescia (Italy)      TC 201        Surface chemical analysis

16      Brescia (Italy)      TC 201/SC 4   Surface chemical analysis/Depth profiling

16      Brescia (Italy)      TC 201/SC 5   Surface chemical analysis/Auger electron spectroscopy

16      Brescia (Italy)      TC 201/SC 7   Surface chemical analysis/X-ray photoelectron spectroscopy

16-22   Berlin (Germany)     TC 130        Graphic technology

17      Brescia (Italy)      TC 201/SC 3   Surface chemical analysis/Data management and treatment

17      Brescia (Italy)      TC 201/SC 8   Surface chemical analysis/Glow discharge spectroscopy
18      Trento (Italy)             TC 201/SC 6   Surface chemical analysis/Secondary ion mass spectrometry

18-24   Phoenix (USA)              TC 106        Dentistry

19      Chicago (USA)              TC 21/SC 3    Equipment for fire protection and fire fighting/Fire detection and alarm systems

19-20   Copenhagen                 JTC 1/SC 22   Information technology/Programming languages, their environments and system software
        (Denmark)                                interfaces

19-20   La Plaine St-Denis         TC 164/SC 3   Mechanical testing of metals/Hardness testing
        (France)

19-20   New Delhi (India)          TMB           Technical Management Board

19-21   San Francisco              TC 243        Project Committee: Consumer product safety
        (USA)

19-21   London (United             TC 246        Project committee: Anti-counterfeiting tools
        Kingdom)

19-22   Paris (France)         *   TC 164/SC 4   Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

19-23   Seoul (Korea,              JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)
        Republic of)

19-23   Bali (Indonesia)           TC 165        Timber structures

19-23   Adelaide (Australia)       TC 190        Soil quality

19-23   Adelaide (Australia)       TC 190/SC 2   Soil quality/Sampling

20      Chicago (USA)              TC 21/SC 6    Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting
                                                 systems using foam and powder

20      Berlin (Germany)           TC 29/SC 8    Small tools/Tools for pressing and moulding

20-22   Paris (France)         *   TC 164/SC 5   Mechanical testing of metals/Fatigue testing

20-23   Paris (France)             TC 59/SC 8    Buildings and civil engineering works/Sealants

20-23   Gaithersburg               TC 172/SC 5   Optics and photonics/Microscopes and endoscopes
        (USA)

21      Chicago (USA)              TC 21/SC 2    Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

21      Paris (France)             TC 164/SC 2   Mechanical testing of metals/Ductility testing

21      Adelaide (Australia)       TC 190/SC 1   Soil quality/Evaluation of criteria, terminology and codification

21-22   Chicago (USA)              TC 21/SC 8    Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using
                                                 gas

21-23   New Delhi (India)          GA            General Assembly

21-23   Amsterdam                  TC 225        Market, opinion and social research
        (Netherlands)

22      Chicago (USA)              TC 21/SC 11   Equipment for fire protection and fire fighting/Smoke and heat control systems and
                                                 components

22      Singapore                  TC 59/SC 13   Buildings and civil engineering works/Organization of information about construction works
        (Singapore)

22      La Plaine St-Denis         TC 79/SC 2    Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
        (France)

22      La Plaine St-Denis         TC 79/SC 6    Light metals and their alloys/Wrought aluminium and aluminium alloys
        (France)

22      La Plaine St-Denis     *   TC 79/SC 9    Light metals and their alloys/Symbolization
        (France)
22        Sao Paulo (Brazil)           TC 142          Cleaning equipment for air and other gases

22        Adelaide (Australia)         TC 190/SC 4     Soil quality/Biological methods

22        Adelaide (Australia)         TC 190/SC 7     Soil quality/Soil and site assessment

22        Beijing (China)              TC 213          Dimensional and geometrical product specifications and verification

22-23     Las Vegas (USA)              TC 159/SC 4     Ergonomics/Ergonomics of human-system interaction

22-23     La Plaine St-Denis           TC 164/SC 1     Mechanical testing of metals/Uniaxial testing
          (France)

22-23     San Francisco                TC 240          Project Committee: Product recall
          (USA)

23        Chicago (USA)                TC 21           Equipment for fire protection and fire fighting

23        La Plaine St-Denis           TC 79           Light metals and their alloys
          (France)

23        Adelaide (Australia)         TC 190/SC 3     Soil quality/Chemical methods and soil characteristics

24        New Delhi (India)            COUNCIL         Council

25-26     London (United               TC 254          Safety of amusement rides and amusement devices
          Kingdom)

26        Bangkok (Thailand)           TC 44/SC 9      Welding and allied processes/Health and safety

26-27     Geneva                       TAG 8           Building
          (Switzerland)

26-30     Kharkov (Ukraine)            TC 218          Timber

27        Valencia (Spain)         *   IULTCS          International Union of Leather Technologists and Chemists Societies

28        Kuala Lumpur                 TC 61/SC 4      Plastics/Burning behaviour
          (Malaysia)

28        La Plaine St-Denis           TC 206          Fine ceramics
          (France)

29        Gothenburg                   TC 22/SC 9      Road vehicles/Vehicle dynamics and road-holding ability
          (Sweden)

29        Vienna (Austria)             TC 146/SC 3     Air quality/Ambient atmospheres

29        Vienna (Austria)             TC 146/SC 6     Air quality/Indoor air

29-30     Riverside (USA)              TC 58/SC 2      Gas cylinders/Cylinder fittings

30        Busan (Korea,                JTC 1/SC 34     Information technology/Document description and processing languages
          Republic of)

3rd Quarter 2011

        Sapporo (Japan)       **   TC 184/SC 1   Automation systems and integration/Physical device control

October 2011

3-7     London (United             TC 146/SC 2   Air quality/Workplace atmospheres
        Kingdom)

4-6     Dublin (Ireland)           TC 34/SC 17   Food products/Management systems for food safety

4-7     Sapporo (Japan)            TC 159/SC 5   Ergonomics/Ergonomics of the physical environment

5       Sydney                     TC 89/SC 1    Wood-based panels/Fibre boards
        (Australia)
5       Sydney                   TC 89/SC 2    Wood-based panels/Particle boards
        (Australia)

5-7     Songdo (Korea,           JTC 1/SC 17   Information technology/Cards and personal identification
        Republic of)

6       San Diego (USA) *        TC 79/SC 11   Light metals and their alloys/Titanium

6       San Antonio         *    TC 92/SC 2    Fire safety/Fire containment
        (USA)

6-7     Geneva                   CASCO         Committee on conformity assessment
        (Switzerland)

7       Sydney                   TC 89         Wood-based panels
        (Australia)

9       Beijing (China)          TC 27/SC 1    Solid mineral fuels/Coal preparation: Terminology and performance

9-14    Beijing (China)     *    TC 27         Solid mineral fuels

9-14    Tampa, Florida      *    TC 204        Intelligent transport systems
        (USA)

10      Beijing (China)          TC 27/SC 5    Solid mineral fuels/Methods of analysis

10-11   Milan (Italy)            TC 209        Cleanrooms and associated controlled environments

10-14   Berlin (Germany)         TC 39/SC 2    Machine tools/Test conditions for metal cutting machine tools

10-14   Dublin (Ireland)         TC 94/SC 15   Personal safety -- Protective clothing and equipment/Respiratory protective devices

10-14   Bangkok                  TC 157        Non-systemic contraceptives and STI barrier prophylactics
        (Thailand)

10-14   Berlin (Germany)         TC 160        Glass in building

10-14   Nanjing (China)          TC 193        Natural gas

10-14   Nanjing (China)     **   TC 193/SC 1   Natural gas/Analysis of natural gas

10-14   Washington, D.C          TC 251        Project committee: Asset management
        (USA)

11-12   Paris (France)           TC 17/SC 20   Steel/General technical delivery conditions, sampling and mechanical testing methods

12-13   Bangalore (India)        TC 34/SC 15   Food products/Coffee

12-14   Okinawa (Japan)          TC 172/SC 3   Optics and photonics/Optical materials and components

13      Maryland (USA)           TC 22/SC 5    Road vehicles/Engine tests

13      Annapolis (USA)          TC 22/SC 7    Road vehicles/Injection equipment and filters for use on road vehicles

13      Annapolis (USA)          TC 70/SC 7    Internal combustion engines/Tests for lubricating oil filters

13      Vienna (Austria)         TC 146/SC 1   Air quality/Stationary source emissions

13      Berlin (Germany)         TC 160/SC 1   Glass in building/Product considerations

13      Tokyo (Japan)            TC 173/SC 2   Assistive products for persons with disability/Classification and terminology

14      London (United           TC 25         Cast irons and pig irons
        Kingdom)

14      Berlin (Germany)         TC 160/SC 2   Glass in building/Use considerations

16-21   Suzhou (China)           TC 184/SC 4   Automation systems and integration/Industrial data

17      Berlin (Germany)         TC 2/SC 7     Fasteners/Reference standards
19      Berlin (Germany)         TC 2/SC 12    Fasteners/Fasteners with metric internal thread

17-21   Yokohama                 TC 45         Rubber and rubber products
        (Japan)

17-21   Alexandria          *    TC 210        Quality management and corresponding general aspects for medical devices
        (USA)

18      Berlin (Germany)         TC 2/SC 11    Fasteners/Fasteners with metric external thread

18      Teddington               TC 202        Microbeam analysis
        (United
        Kingdom)

18-19   Beijing (China)          TC 111/SC 1   Round steel link chains, chain slings, components and accessories/Chains and chain slings

18-20   Seattle (USA)            TC 20/SC 10   Aircraft and space vehicles/Aerospace fluid systems and components

18-20   Lisbon (Portugal)        TC 58/SC 3    Gas cylinders/Cylinder design

19      Berlin (Germany)         TC 2          Fasteners

20      Yokohama                 TC 45/SC 2    Rubber and rubber products/Testing and analysis
        (Japan)

20      Ottawa (Canada)          TC 92/SC 3    Fire safety/Fire threat to people and environment

20      Beijing (China)          TC 111        Round steel link chains, chain slings, components and accessories

20      Beijing (China)          TC 111/SC 3   Round steel link chains, chain slings, components and accessories/Components and accessories

20-21   Berlin (Germany)         TC 2/SC 14    Fasteners/Surface coatings

21      Ottawa (Canada)          TC 92/SC 4    Fire safety/Fire safety engineering

21      Paris (France)           TC 244        Industrial furnaces and associated processing equipment

24      London (United           TC 41/SC 3    Pulleys and belts (including veebelts)/Conveyor belts
        Kingdom)

24-25   Genoa (Italy)            TC 44/SC 10   Welding and allied processes/Unification of requirements in the field of metal welding

24-25   Paris (France)           TC 253        Project committee: Treated wastewater re-use for irrigation

24-28   Helsinki                 TC 8          Ships and marine technology
        (Finland)

24-28   Amsterdam                TC 138        Plastics pipes, fittings and valves for the transport of fluids
        (Netherlands)

24-28   Ottawa (Canada)          TC 181        Safety of toys

24-29   Beijing (China)          TC 176        Quality management and quality assurance

25      Osaka (Japan)            TC 38/SC 23   Textiles/Fibres and yarns

25      London (United           TC 41/SC 1    Pulleys and belts (including veebelts)/Friction
        Kingdom)

25      Amsterdam                TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
        (Netherlands)                          and drainage (including land drainage)

25-26   Genoa (Italy)       **   TC 44/SC 11   Welding and allied processes/Qualification requirements for welding and allied processes
                                               personnel

25-27   Beltsville,              TC 34/SC 16   Food products/Horizontal methods for molecular biomarker analysis
        Maryland (USA)

26      Osaka (Japan)            TC 38/SC 24   Textiles/Conditioning atmospheres and physical tests for textile fabrics
26      London (United         TC 41/SC 4    Pulleys and belts (including veebelts)/Synchronous belt drives
        Kingdom)

26      Amsterdam              TC 138/SC 2   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water
        (Netherlands)                        supplies

26      Amsterdam         **   TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
        (Netherlands)                        of gaseous fuels

26-28   Troy (USA)             TC 22         Road vehicles

26-28   Nanjing (China)   *    TC 70         Internal combustion engines

27      Osaka (Japan)          TC 38         Textiles

27      London (United    *    TC 41         Pulleys and belts (including veebelts)
        Kingdom)

27      Madrid (Spain)         TC 87         Cork

27      Amsterdam              TC 138/SC 3   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial
        (Netherlands)                        applications

27      Amsterdam              TC 138/SC 5   Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and
        (Netherlands)                        valves of plastic materials and their accessories -- Test methods and basic specifications

27      Amsterdam         *    TC 138/SC 6   Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for
        (Netherlands)                        all applications

27      Elda (Alicante)        TC 216        Footwear
        (Spain)

27-28   Genoa (Italy)          TC 44         Welding and allied processes

27-28   Moscow                 TC 178        Lifts, escalators and moving walks
        (Russian
        Federation)

28      Ottawa (Canada)        TC 59/SC 17   Buildings and civil engineering works/Sustainability in buildings and civil engineering works

31      Melbourne         *    JTC 1/SC 25   Information technology/Interconnection of information technology equipment
        (Australia)

        Oslo (Norway)     **   TC 59/SC 14   Buildings and civil engineering works/Design life

        London (United    **   TC 59/SC 15   Buildings and civil engineering works/Performance criteria for single family attached and detached
        Kingdom)                             dwellings

October-November 2011

21-4    Brussels               TC 92/SC 1    Fire safety/Fire initiation and growth
        (Belgium)

31-3    London (United         TC 46/SC 11   Information and documentation/Archives/records management
        Kingdom)

31-3    Bangkok                TC 238        Solid biofuels
        (Thailand)

31-4    Washington, D.C        TC 242        Energy Management
        (USA)

November 2011

2       Bangkok                TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
        (Thailand)                           conditions

2       Bangkok                TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
        (Thailand)

2-3     Houston (USA)     *    TC 67/SC 7    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
                                             industries/Offshore structures
2-3     Winterthur              TC 172/SC 6   Optics and photonics/Geodetic and surveying instruments
        (Switzerland)

3       Kyoto (Japan)           TC 33         Refractories

3       Bangkok                 TC 123/SC 5   Plain bearings/Quality analysis and assurance
        (Thailand)

3       Bangkok                 TC 123/SC 6   Plain bearings/Terms and common items
        (Thailand)

3-4     Washington, D.C     *   TC 85/SC 6    Nuclear energy, nuclear technologies, and radiological protection/Reactor technology
        (USA)

4       Troy (USA)              TC 22/SC 10   Road vehicles/Impact test procedures

4       Troy (USA)              TC 22/SC 12   Road vehicles/Passive safety crash protection systems

4       Paris (France)          TC 22/SC 21   Road vehicles/Electrically propelled road vehicles

4       Cincinnati (USA)        TC 60         Gears

4       Bangkok                 TC 123        Plain bearings
        (Thailand)

4       Bangkok                 TC 123/SC 7   Plain bearings/Special types of plain bearings
        (Thailand)

7-11    Osaka (Japan)           TC 94/SC 13   Personal safety -- Protective clothing and equipment/Protective clothing

7-11    Beijing (China)         TC 223        Societal security

7-12    San Diego (USA)         JTC 1         Information technology

10      Gaithersburg            TC 30/SC 7    Measurement of fluid flow in closed conduits/Volume methods including water meters
        (USA)

10      Sao Paulo               TC 250        Project committee: Sustainability in event management
        (Brazil)

10-11   Washington, D.C         TC 260        Human resource management
        (USA)

11      Venice (Italy)          TC 227        Springs

14      Tel Aviv (Israel)       TC 23/SC 18   Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

14-18   Auckland (New       *   TC 217        Cosmetics
        Zealand)

15-17   London (United          TC 189        Ceramic tile
        Kingdom)

17      Munich                  TC 44/SC 12   Welding and allied processes/Soldering materials
        (Germany)

17-18   Pretoria (South         TC 211        Geographic information/Geomatics
        Africa)

18      Johannesburg            TC 229        Nanotechnologies
        (South Africa)

21-22   Berlin (Germany)        TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

22-23   Rome (Italy)            TC 34/SC 4    Food products/Cereals and pulses

22-25   Boulogne sur            TC 234        Fisheries and aquaculture
        Mer (France)

23-24   Berlin (Germany)        TC 259        Project committee: Outsourcing
24      London (United         TC 59/SC 2    Buildings and civil engineering works/Terminology and harmonization of languages
        Kingdom)

24      Stellenbosch           TC 98/SC 2    Bases for design of structures/Reliability of structures
        (South Africa)

24      Stellenbosch           TC 98/SC 3    Bases for design of structures/Loads, forces and other actions
        (South Africa)

25      Stellenbosch           TC 98         Bases for design of structures
        (South Africa)

28-30   London (United         TC 20         Aircraft and space vehicles
        Kingdom)

30      La Plaine St-     *    TC 147/SC 3   Water quality/Radiological methods
        Denis (France)

        Pau (France)      **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
                                             industries/Drilling and completion fluids, and well cements

        (Jamaica)         **   TC 93         Starch (including derivatives and by-products)

December 2011

2       Linz (Austria)    **   TC 44/SC 6    Welding and allied processes/Resistance welding and allied mechanical joining

2       Brussels               TC 94/SC 3    Personal safety -- Protective clothing and equipment/Foot protection
        (Belgium)

2       La Plaine St-          TC 158        Analysis of gases
        Denis (France)

7-8     La Plaine St-          TC 17/SC 3    Steel/Steels for structural purposes
        Denis (France)

12-16   Sydney                 TC 108/SC 5   Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of
        (Australia)                          machines

13-14   Heidelberg             TC 23/SC 15   Tractors and machinery for agriculture and forestry/Machinery for forestry
        (Germany)

January 2012

11-12   Paris (France)         TC 257        General technical rules for determination of energy savings in renovation projects, industrial
                                             enterprises and regions

        Charlotte (USA)   **   TC 213        Dimensional and geometrical product specifications and verification

January-February 2012

30-4    Paris (France)    **   TC 236        Project Committee: Project Management

30-4    Paris (France)    *    TC 258        Project, programme and portfolio management

February 2012

13-14   Orlando (USA)     *    TC 184/SC 2   Automation systems and integration/Robots and robotic devices

20-24   Guangzhou         *    JTC 1/SC 6    Information technology/Telecommunications and information exchange between systems
        (China)

20-24   Kyoto (Japan)     *    JTC 1/SC 35   Information technology/User interfaces

20-24   Paris (France)    **   TC 23/SC 2    Tractors and machinery for agriculture and forestry/Common tests

22-23   Geneva            *    TMB           Technical Management Board
        (Switzerland)

        Florida (USA)     **   TC 115        Pumps

February-March 2012
25-5    Toulouse            **   TC 34/SC 12   Food products/Sensory analysis
        (France)

28-2    Berlin (Germany)    **   TC 107        Metallic and other inorganic coatings

March 2012

12-16   Milan (Italy)       *    TC 172/SC 7   Optics and photonics/Ophthalmic optics and instruments

29      Frankfurt           *    TC 23/SC 19   Tractors and machinery for agriculture and forestry/Agricultural electronics
        (Germany)

        (Australia)         **   JTC 1/SC 36   Information technology/Information technology for learning, education and training

April 2012

15-20   (USA)               **   TC 110        Industrial trucks

15-20   (USA)               **   TC 110/SC 1   Industrial trucks/General terminology

15-20   (USA)               **   TC 110/SC 2   Industrial trucks/Safety of powered industrial trucks

16      Berlin (Germany)    **   TC 161        Control and protective devices for gas and/or oil burners and appliances

16-20   Durban (South       **   TC 135        Non-destructive testing
        Africa)

16-20   La Plaine St-       *    TC 198        Sterilization of health care products
        Denis (France)

16-20   Melbourne           **   TC 204        Intelligent transport systems
        (Australia)

17      Senlis (France)     **   TC 117        Fans

23-27   Nairobi (Kenya)     **   TC 34         Food products

25-26   Moscow              **   TC 67/SC 2    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Russian                               industries/Pipeline transportation systems
        Federation)

        Bern                **   TC 113        Hydrometry
        (Switzerland)

        Durban (South       **   TC 135/SC 3   Non-destructive testing/Ultrasonic testing
        Africa)

        Durban (South       **   TC 135/SC 5   Non-destructive testing/Radiation methods
        Africa)

May 2012

7-11    Berlin (Germany)    **   TC 46         Information and documentation

7-11    Berlin (Germany)    **   TC 46/SC 4    Information and documentation/Technical interoperability

7-11    Berlin (Germany)    *    TC 46/SC 11   Information and documentation/Archives/records management

8       Chicago (USA)       **   TC 68/SC 7    Financial services/Core banking

8-10    Sydney              *    TC 145/SC 1   Graphical symbols/Public information symbols
        (Australia)

10      Chicago (USA)       *    TC 68         Financial services

10-11   Tel Aviv (Israel)   **   TC 184/SC 5   Automation systems and integration/Interoperability, integration, and architectures for enterprise
                                               systems and automation applications

14-15   Rio de Janeiro      **   TC 67/SC 4    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Brazil)                               industries/Drilling and production equipment

15-17   Buenos Aires        *    TC 67/SC 5    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Argentina)                            industries/Casing, tubing and drill pipe
20-25   Jeju (Korea,       *    JTC 1/SC 7    Information technology/Software and systems engineering
        Republic of)

20-25   Seoul (Korea,      **   TC 228        Tourism and related services
        Republic of)

21-25   Berlin (Germany)   **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

22      Delft              **   TC 195        Building construction machinery and equipment
        (Netherlands)

22      Delft              *    TC 195/SC 1   Building construction machinery and equipment/Machinery and equipment for concrete work
        (Netherlands)

        (Unknown)          **   TC 126        Tobacco and tobacco products

        (Australia)        **   TC 145        Graphical symbols

June 2012

4-8     Paris (France)     **   TC 85         Nuclear energy, nuclear technologies, and radiological protection

6-7     Geneva             **   COPOLCO       Committee on consumer policy
        (Switzerland)

11-12   Paris (France)     *    TC 44/SC 8    Welding and allied processes/Equipment for gas welding, cutting and allied processes

11-15   Buffalo (USA)      **   TC 108/SC 3   Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock
                                              measuring instruments

11-15   Kyoto (Japan)      *    TC 121        Anaesthetic and respiratory equipment

11-15   Kyoto (Japan)      **   TC 121/SC 1   Anaesthetic and respiratory equipment/Breathing attachments and anaesthetic machines

11-16   La Plaine St-      *    TC 147        Water quality
        Denis (France)

13-14   Geneva             *    TMB           Technical Management Board
        (Switzerland)

19-22   Vienna (Austria)   *    REMCO         Committee on reference materials

20-21   Milan (Italy)      **   TC 29/SC 10   Small tools/Assembly tools for screws and nuts, pliers and nippers

24-29   Madrid (Spain)     *    TC 37         Terminology and other language and content resources

        Orlando (USA)      **   TC 10         Technical product documentation

        Brussels           **   TC 34/SC 9    Food products/Microbiology
        (Belgium)

        Calgary            **   TC 67/SC 3    Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
        (Canada)                              industries/Drilling and completion fluids, and well cements

        Brugge             **   TC 86/SC 6    Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
        (Belgium)

2nd Quarter 2012

        (China)            **   TC 39/SC 2    Machine tools/Test conditions for metal cutting machine tools

        (Greece)           **   TC 92/SC 3    Fire safety/Fire threat to people and environment

        (France)           **   TC 211        Geographic information/Geomatics

August 2012

27-31   Montreal           **   JTC 1/SC 35   Information technology/User interfaces
        (Canada)

September 2012

3-8     Zurich             **   TC 142        Cleaning equipment for air and other gases
        (Switzerland)

19-21   San Diego (USA) **       GA            General Assembly

22      San Diego (USA) **       COUNCIL       Council

23-28   Rio de Janeiro      **   TC 164        Mechanical testing of metals
        (Brazil)

23-28   Rio de Janeiro      **   TC 164/SC 1   Mechanical testing of metals/Uniaxial testing
        (Brazil)

23-28   Rio de Janeiro      **   TC 164/SC 3   Mechanical testing of metals/Hardness testing
        (Brazil)

23-28   Rio de Janeiro      **   TC 164/SC 4   Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
        (Brazil)

24-26   Sydney              *    TC 54         Essential oils
        (Australia)

24-28   Stockholm           **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)
        (Sweden)

        Zibo city (China)   **   TC 206        Fine ceramics

        Cadiz (Spain)       **   TC 213        Dimensional and geometrical product specifications and verification

October 2012

1-2     Ottawa (Canada)     *    TC 34/SC 11   Food products/Animal and vegetable fats and oils

8-12    (Unknown)           **   TC 92         Fire safety

10-11   Berlin (Germany)    *    TC 167        Steel and aluminium structures

10-17   (China)             **   TC 23/SC 6    Tractors and machinery for agriculture and forestry/Equipment for crop protection

14-19   Tokyo (Japan)       *    TC 59/SC 14   Buildings and civil engineering works/Design life

15-19   Amsterdam           *    TC 146        Air quality
        (Netherlands)

24      Sydney              **   TC 138/SC 4   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply
        (Australia)                            of gaseous fuels

        (Unknown)           **   TC 92/SC 2    Fire safety/Fire containment

        (Brazil)            **   TC 127        Earth-moving machinery

November 2012

        Tokyo (Japan)       **   TC 17/SC 1    Steel/Methods of determination of chemical composition

        (Korea, Republic    **   TC 23/SC 7    Tractors and machinery for agriculture and forestry/Equipment for harvesting and conservation
        of)

        (USA)               **   TC 118/SC 6   Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air
                                               systems

4th Quarter 2012

        (Saudi Arabia)      **   TC 211        Geographic information/Geomatics

Month unknown 2012

        (Europe)            **   JTC 1/SC 24   Information technology/Computer graphics, image processing and environmental data
                                               representation

        (Korea, Republic    **   TC 28         Petroleum products and lubricants
        of)
        Chicago (USA)      **   TC 68/SC 4    Financial services/Securities and related financial instruments

        Tokyo (Japan)      **   TC 69         Applications of statistical methods

        (South Africa)     **   TC 102        Iron ore and direct reduced iron

        Sydney             **   TC 138        Plastics pipes, fittings and valves for the transport of fluids
        (Australia)

        Sydney             **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
        (Australia)                           and drainage (including land drainage)

September 2012

23-28   Rio de Janeiro     **   TC 164/SC 2   Mechanical testing of metals/Ductility testing
        (Brazil)

Month unknown 2012

        (Finland)          **   TC 190        Soil quality

        (China)            **   TC 202        Microbeam analysis

        (France)           **   TC 205        Building environment design

        (Thailand)         **   TC 207        Environmental management

February-March 2013

25-1    (South America)    **   JTC 1/SC 35   Information technology/User interfaces

March 2013

        (Kenya)            **   JTC 1/SC 36   Information technology/Information technology for learning, education and training

April 2013

10-11   Helsinki           **   TC 117        Fans
        (Finland)

        Paris (France)     **   TC 29/SC 5    Small tools/Grinding wheels and abrasives

May 2013

13-16   Chicago (USA)      **   TC 195        Building construction machinery and equipment

13-17   (Italy)            **   TC 29         Small tools

13-17   Guangzhou          *    TC 68         Financial services
        (China)

27-31   Shanghai           **   TC 4          Rolling bearings
        (China)

        Ottawa (Canada)    **   JTC 1/SC 38   Information technology/Distributed application platforms and services (DAPS)

        (China)            **   TC 10         Technical product documentation

        Paris (France)     **   TC 46/SC 11   Information and documentation/Archives/records management

August 2013

26-30   (South America)    **   JTC 1/SC 35   Information technology/User interfaces

September 2013

        (Korea, Republic   **   TC 123/SC 2   Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing
        of)                                   conditions

        (Korea, Republic   **   TC 123/SC 3   Plain bearings/Dimensions, tolerances and construction details
        of)
      (Korea, Republic    **   TC 123/SC 5   Plain bearings/Quality analysis and assurance
      of)

      (Korea, Republic    **   TC 123/SC 6   Plain bearings/Terms and common items
      of)

      (Korea, Republic    **   TC 123/SC 7   Plain bearings/Special types of plain bearings
      of)

      Tokyo (Japan)       **   TC 142        Cleaning equipment for air and other gases

October 2013

      Mexico (Mexico)     **   TC 113        Hydrometry

Month unknown 2013

      (Australia)         **   REMCO         Committee on reference materials

      (South Africa)      **   TC 37         Terminology and other language and content resources

      (Unknown)           **   TC 38/SC 1    Textiles/Tests for coloured textiles and colorants

      (USA)               **   TC 69         Applications of statistical methods

      (Korea, Republic    **   TC 107        Metallic and other inorganic coatings
      of)

      Porto de            **   TC 135/SC 9   Non-destructive testing/Acoustic emission testing
      Galinhas (Brazil)

      (Norway)            **   TC 138/SC 1   Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste
                                             and drainage (including land drainage)

      Amsterdam           **   TC 164/SC 5   Mechanical testing of metals/Fatigue testing
      (Netherlands)

      (Portugal)          **   TC 228        Tourism and related services

May 2014

      Washington, D.C     **   TC 46/SC 11   Information and documentation/Archives/records management
      (USA)

Month unknown 2014

      (USA)               **   REMCO         Committee on reference materials

      (Brazil)            **   TC 28         Petroleum products and lubricants

      (Germany)           **   TC 37         Terminology and other language and content resources

      (USA)               **   TC 142        Cleaning equipment for air and other gases

Month unknown 2015

      (South Africa)      **   REMCO         Committee on reference materials

      London (United      **   TC 142        Cleaning equipment for air and other gases
      Kingdom)

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:205
posted:9/22/2011
language:English
pages:35