LANDSCAPEProof 91

Document Sample
LANDSCAPEProof 91 Powered By Docstoc
					I M P L E M E N T S & AT TAC H M E N T S
    Ta b l e o f C o n T e n T s
    Rear Grading Blades  .  .  .  .  .  .  .  .  .  . 3 – 5

    Box Scrapers  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6 – 7

    Grading Scrapers  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

    Landscape Rakes  .  .  .  .  .  .  .  .  .  .  .  .  . 9 - 11

    Pulverizers  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12 - 13

    Turf Renovators / Seeders  .  .  .  .  .  .  . 14

    Post Hole Diggers  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

    Rotary Tillers  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16 - 17

    Stump Grinders  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18

    Disk Harrows / Quick Hitch  .  .  .  .  .  . 19

    Backhoes and Loaders  .  .  .  .  .  .  .  .  .  . 20

    Finish Mowers .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 21

    Snow Blowers .  .  .  .  .  .  .  .  .  .  .  .  .  . 22 - 23




2
                                                                                                    LANDSCAPE EQUIPMENT




rear grading blades
Overview
McCormick by Woods landscape blades are designed for maximum performance with minimum down time. Durable,
formed moldboards are curved for rigidity and strength. Adjustable blades allow you to adjust the tilt, angle, and offset
to match the job. Whether it’s landscape grading, construction clean-up, or snow removal, rely on our full line of grading
blades for years of performance and durability.

Light Duty
RB10.60
• Category 0, Limited 1
• For up to 25 hp subcompact tractors
• 7 gauge moldboard with 1/2” x 6” high-carbon reversible
  cutting edge for long life
• Convenient parking stand standard



RB15.48 & RB15.60                                                         Model RB15.60

• Category 1
• Up to 30 hp tractors
• Available in 4’ & 5’ widths
• 360° Pivoting blade with five forward and five reverse angle
  positions
• 3/8-inch by 3-inch welded cutting edge


StanDaRD Duty
RB20.60 / RB20.72 / RB20.84
• Category 0 & 1
• 12–40 hp tractors
• Available in 5’, 6’, & 7’ widths
• Durable 1/2” x 6” high-carbon reversible
  cutting edge provides long service life
• Strong 3/16” (RB20.60) or 1/4” (RB20.72/84)
  curved moldboards improve rigidity                                 Standard duty model RB20.72




MediuM duTy
RB30.72 / RB30.84 / RB30.96
• Category 1 & 2
• 30–75 hp tractors
• Available in 6’, 7’, & 8’ widths
• 5 forward and 5 backfill angles plus 6 offset
  positions provide superior blade control
• Versatile 1/2” x 6” high-carbon reversible,
  replaceable cutting edge provides long
  service life
• Sturdy 5/16” moldboard has a full curve for
  smooth material flow



                                                                    RB30.84 with optional tailwheel assembly and end plates



                                                                                                                              3
    rear grading blades
    heavy Duty
    RB35.84 / RB35.96
    • Category 2 & 3
    • 80–100 hp tractors
    • Available in 7’ & 8’ widths
    • Grader-type steel cutting edges provide long life and superior
      performance
    • Available in all hydraulic or all angle options for angle, tilt, &
      offset
    • Full hydraulic models allow precise blade and material control
      (angle, tilt, & offset)
    • 17” high, reinforced moldboard
    • Optional end plates, skid shoes & tail wheel
                                                                                Heavy-duty model RB35.96



    heavy Duty
    RB40.108 / RB40.120
    • Category 2 & 3                                                                                                      Performance
    • 80–150 hp tractors                                                                                                     Guide:
    • Available in 9’ & 10’ widths                                                                                      Move sand, gravel,
    • Grader-type steel cutting edges provide long life and superior                                                     rock, and snow
      performance
    • Full hydraulic models allow precise blade and material control
      (angle, tilt, & offset)
    • Model available with manual offset & tilt and hydraulic angle
    • Tough, dozer-type, full box construction
    • Available in all hydraulic or hydraulic angle cylinder
      options
    • 18” high, reinforced moldboard




       Heavy-duty moldboards
       Rugged, dozer-type moldboard design is a full box section
       construction, providing strength and rigidity in tough conditions.




                                                                                  Professional grade cutting edge
                                    RB40.120 with optional tailwheel assembly     Each 1/2" x 6" carbon steel grader-type cutting edge is
                                                                                  reversible, featuring bevels on both edges for long life and
                                                                                  rugged performance.




4
                                                                                                                                           LANDSCAPE EQUIPMENT




rear grading blades
Light & StanDaRD-Duty BLaDeS
Specifications              RB15 .48                RB15 .60                   RB10 .60                  RB20 .60                     RB20 .72                  RB20 .84
Moldboard length      48"                      60"                      59"                        59"                          71"                         83"
Moldboard height      15"                      15"                      9.7"                       14"                          14"                         14"
Moldboard thickness   3/16"                    3/16"                    7 gauge                    3/16"                        1/4"                        1/4"
Approximate weight    164 lbs.                 180 lbs.                 182 lbs.                   262 lbs.                     283 lbs.                    304 lbs.
Pivot, angle          360˚, 5 fwd–5 rev        360˚, 5 fwd–5 rev        360˚, 5 fwd–5 rev          360˚, 5 fwd–3 rev            360˚, 5 fwd–3 rev           360˚, 5 fwd–3 rev
Tilt                  –                        –                        —                          15˚-3 position               15˚-3 position              15˚-3 position
Offset                –                        –                        12" left or right          –                            12" left or right           12" left or right
End plates            –                        –                        —                          –                            optional                    optional
Skid shoes            –                        –                        optional                   optional                     optional                    optional
Tailwheel             –                        –                        –                          –                            –                           –
ASAE quick hitch      yes                      yes                      yes                        yes                          yes                         yes
compatible
Parking stand         –                        –                        standard                   standard                     standard                    standard
Tractor hitch         Cat. 1                   Cat. 1                   Cat. 0, limited 1, & 1     Cat. 0 & 1                   Cat. 1                      Cat. 1
Tractor engine hp     up to 30 hp              up to 30 hp              up to 25 hp                12–30 hp                     12–40 hp                    12–40 hp

                                                   L I G H T                                                               S T A N D A R D


MeDiuM & heavy Duty BLaDeS
Specifications            RB30 .72       RB30 .84              RB30 .96            RB35 .84                     RB35 .96                   RB40 .108                RB40 .120
Moldboard length      71"                83"                 95"                   83"                        95"                      107"                     119"

Moldboard height      18"                18"                 18"                   17"                        17"                      18"                      18"

Moldboard thickness   5/16"              5/16"               5/16"                 5/16"                      5/16"                    1/4" box                 1/4" box

Approximate weight    530 lbs.           565 lbs.            600 lbs.              810 lbs.                   855 lbs.                 1483 lbs.                1535 lbs.
Angle-forward         360˚, 5 fwd        360˚, 5 fwd         360˚, 5 fwd           15˚, 30˚, 45˚ &            15˚, 30˚, 45˚ &          up to 60˚ ea. side       up to 60˚ ea. side
                                                                                   60˚ ea. side               60˚ ea. side
Angle-reverse         360˚, 5 rev         360˚, 5 rev        360˚, 5 rev           15˚ & 30˚ ea. side         15˚ & 30˚ ea. side       up to 60˚ ea. side       up to 60˚ ea. side

Tilt                  5 position         5 position          5 position            up to 30˚                  up to 30˚                up to 28˚                up to 28˚

Offset                4", 10", or 16"    4", 10", or 16"     4", 10", or 16"       up to 23-1/2"              up to 23-1/2"            up to 33"                up to 33"
                      left or right      left or right       left or right         left or right              left or right            left or right            left or right

End plates            optional           optional            optional              optional                   optional                 –                        –

Skid shoes            optional           optional            optional              optional                   optional                 –                        –

Tailwheel             optional           optional            optional              optional                   optional                 optional                 optional

ASAE quick hitch      yes                yes                 yes                   yes                        yes                      yes                      yes
compatible

Parking stand         standard           standard            standard              standard                   standard                 standard                 standard
Tractor hitch         Cat. 1 & 2         Cat. 1 & 2          Cat. 1 & 2            Cat. 2 & 3                 Cat. 2 & 3               Cat. 2 & 3               Cat. 2 & 3
Tractor engine hp     30–75 hp           30–75 hp            30–75 hp              50–100 hp                  50–100 hp                80–150 hp                80–150 hp


                                        M E D I U M                                                                 HEAVY              DUTY


                                                                                                                                                                                     5
    boX sCraPers
    Overview
    From the reinforced steel A-frame to the tough, reversible cutting edge, and replaceable scarifiers, McCormick by Woods
    box scrapers are designed for exceptional durability and versatility. Full-length, double beveled cutting edges improve
    cut. High strength moldboards will withstand years of rugged use. A comprehensive line of standard-duty, medium-
    duty, and industrial models are available in widths ranging from 48 to 96 inches.




    Light Duty
    BS10.48
    • Category 0, Limited 1, & 1
    • Up to 25 hp tractors
    • Specifically designed for subcompact and compact tractors
    • 7 gauge side plates
    • 1/2” x 6” reversible beveled cutting edges
    • 4 adjustable, 3-position scarifiers
                                                                                    BS10.48 Light-duty model, pictured


    BS15.48 & BS15.60
    • Category 1
    • Up to 30 hp tractors
    • Available in 4’ and 5’ widths
    • 15” moldboard for maximum material loading
    • Strong, 3/8” x 3” welded cutting edge
    • Hardened scarifier teeth with replaceable tips




    StanDaRD Duty
    BS20.54 / BS20.60 / BS20.65 / BS20.72
    • Category 1, up to 45 hp tractors
                                                                                    BS15.60 Light-duty model, pictured
    • Heavy steel plate A-frame mast
    • Designed to be tougher, stronger, and provide
      longer working life
    • Robotically welded for superior durability
    • 3/8” end plates are thicker than many standard
      models
    • Cutting edges are replaceable for extended life




                            Performance
                                Guide:
                       Ideal for landscapers,
                        farmers, contractors,
                         and municipalities.
                         Scarify, level, grade,
                            and backfill




                                                         Standard-duty BS20.72 pictured
6
                                                                                                                                             LANDSCAPE EQUIPMENT




     boX sCraPers

     MeDiuM Duty
     BS30.72 / BS30.84
     • Category 1
     • 40–65 hp tractors
     • Optional floating, hinged tailgate adapts to a
       full range of grading conditions
     • Strong, 1/2" end plates are designed for years
       of performance
     • 1/4" plate is welded to the end plates to
       increase life
     • Heavy steel plate A-frame mast




                                                                                          BS30.84 Medium-duty with floating tailgate




                                                                                                                               Floating tailgate
                                                                                                                               The BS30 series offers an optional floating, hinged
                                                                                                                               tailgate to provide maximum down force on the
                                                                                                                               cutting edge.




                                                                   Durable wear plate
                                                                   BS30 Series scrapers feature wear plates welded
                                                                   to the inside lower edge of the end plates, for a
                                                                   full 3/4” protection at the point of greatest wear.




     BS30.84 Medium-duty



Light, StanDaRD, anD MeDiuM Duty BOX SCRaPeRS
Specifications              BS10 .48         BS15 .48       BS15 .60           BS20 .54         BS20 .60                 BS20 .65          BS20 .72      BS30 .72             BS30 .84
Working width         48"                48"            60”                54"                 60"                 65"                 72"               72"              84"
Capacity              6.8 cu. ft.        7.7 cu. ft.    9.7 cu. ft.        10.3 cu. ft.        11.5 cu. ft.        12.5 cu. ft.        13.8 cu. ft.      13.8 cu. ft.     16.2 cu. ft.
ASAE quick hitch      yes                yes            yes                yes                 yes                 yes                 yes               yes              yes
compatible
End plate thickness   7 gauge            3/16"          3/16”              3/8"                3/8"                3/8"                3/8"              1/2"             1/2"
Moldboard thickness 3/16"                3/16"          3/16"              3/16"               3/16"               3/16"               3/16"             1/4"             1/4"
Approximate weight 285 lbs.              309 lbs.       351 lbs.           486 lbs.            514 lbs.            528 lbs.            551 lbs.          680 lbs.         750 lbs.
Scarifier depth       0 - 1.5”           0 - 3.6"       0 - 3.6"                               0", 1.5", or 3" adjustable                                0", 1.5", or 3" adjustable
No. of scarifiers     4                  4              5                  4                   5                   5                   6                 6                7
Tailgate type         fixed              –              -                  fixed               fixed               fixed               fixed             fixed; floating optional
Cutting edges         2                  2              2                  2                   2                   2                   2                 2                2
Tractor hitch         Cat. 0, lim. 1 & 1 Cat. 1         Cat. 1             Cat. 1              Cat. 1              Cat. 1              Cat. 1            Cat. 1           Cat. 1
Tractor engine hp     up to 25 hp        up to 30 hp    up to 30 hp        up to 45 hp         up to 45 hp         up to 45 hp         up to 45 hp       40–65 hp         40–65 hp

                                       L I G H T                                                S T A N D A R D                                                M E D I U M


                                                                                                                                                                                         7
       grading sCraPers
       Overview
       The power to smooth, grade and reconstruct. Whether you
       have a gravel driveway, a show arena or baseball diamond, a
       McCormick by Woods Grading Scraper is the right tool. Build or
       restore areas to pristine condition for driving or playing.

       MORe MateRiaL, feweR PaSSeS
       McCormick by Woods Grading Scrapers are designed to handle
       more material in fewer passes. The heavy-duty mast plate creates
       more down force for a smoother surface, virtually eliminating
       the washboard effect. Adjustable skid shoes (for road shaping)
       and shanks make changes simple and economical. With one
       of the tallest side frames available, it allows you to grade more
       material without overflow while approachable leading edges and
       structural reinforcements keep your scraper stronger for longer.


                                                                                                          Model GS20.72

       gS10.54 / gS20.60 / gS20.72 / gS20.84
                                                                 Solid mast plate provides increased
                                                                 weight for greater down force and
               Available Quick-Hitch                             constant ground contact—smoother                                                               Performance
               Category 1 bushing adapter                        surfaces with fewer passes.
               kit for ease of attachment.
                                                                                                                                                                    Guide:
                                                                                                       Reinforcement bar maintains
                                                                                                       strength and handles heavier
                                                                                                                                                              Smooth and grade
                                                                                                       material without compromising                           driveways, show
                                                                                                       structure.                                              arenas, and ball
                                                                                                                                                                  diamonds


    Industry
    leading height
    Higher sides contain more                                                                                              Replaceable and
    material with little risk of                                                                                           adjustable skid shoe
    overflow.
                                                                                                                           Replaceable skid shoes keep the unit
                               Replaceable                       Reversible                                                looking new. Heavy skids wear longer;
                               scarifiers & shanks               cutting edge               Unique pocket                  outside adjustment allows for quick
                               Replaceable scarifiers with       Reversible and                                            changes during road shaping.
                               hardened points for exceptional                              structure shanks
                                                                 replaceable cutting edge   Shank pocket maintains
                               durability and versatility.       for better, longer wear.   toolbar strength.



               Specifications                              GS10 .54                            GS20 .60                       GS20 .72                        GS20 .84
         Weight                                      409 lbs.                         553 lbs.                       655 lbs.                        752 lbs.
         Working width                               53"                              59"                            71"                             83"
         Overall width                               58"                              64"                            76"                             88"
         Overall length                              42"                              46"                            46"                             46"
         Box height                                  14"                              16"                            16"                             16"
         Hitch category                              Limited Cat. 1 / Cat. 1          Cat. 1                         Cat. 1                          Cat. 1
         Number of shanks                            4                                4                              5                               6
         Reversible cutting edge                     1/2 x 6                          1/2 x 6                        1/2 x 6                         1/2 x 6
         Replaceable scarifiers & shanks             -4.0, -2.5, -1.0, +1.0           -2.5, -1.0, +0.5, +2.5         -2.5, -1.0, +0.5, +2.5          -2.5, -1.0, +0.5, +2.5
         Skid Shoe adjustment                        -0.75 to +0.75                   -1.0 to +0.5                   -1.0 to +0.5                    -1.0 to +0.5
         Lower hitch design                          Clevis                           Clevis                         Clevis                          Clevis
         Tractor hp                                  15–30 hp                         20–45 hp                       20–45 hp                        20–45 hp

                                                         SUB-COMPACT                                                     C O M P A C T

8
                                                                                              LANDSCAPE EQUIPMENT




landsCaPe raKes
Overview
McCormick by Woods landscape rakes are built with rugged durability for tough clean-up jobs, and fine raking features
for light-duty lawn care and general maintenance. Our landscape rakes feature high strength box-type beams and
spring-steel tines for handling rocks, dirt or sand. Each model offers multiple angle positions and can pivot 360°.


Light Duty
LR10.60
• Category 0, Limited 1, & 1
• Up to 25 hp tractors
• Specifically designed for subcompact and
  compact tractors
• Provides estate owners with a compact rake
  that’s perfect for leveling and spreading
  topsoil, gravel, or cinders and removing stones
  or trash
• 30 heat treated, carbon steel tines
• Dual gauge wheel option


                                                                Light duty model LR10.60
StanDaRD Duty
LR20.60
• Category 0 & 1
                                                                          Performance
• 12–40 hp tractors
                                                                             Guide:
• Double bolt tine attachment keeps teeth
                                                                      Landscape grooming,
  secure
                                                                      seed bed preparation,
• Adjustable rake offers five forward and three                            and general
  reverse positions                                                       maintenance.
• One-inch tine spacing provide superior
  material collection
  and a smooth, even grade




                   Standard duty LR20.60 with optional guage wheels




                                                                                                                        9
     landsCaPe raKes
                                                                                                      Adjustable rake angle
     MeDiuM Duty                                                                                      Multiple forward and backfill rake angles improve flow and
                                                                                                      distribution of dirt and other material. Adjust the angle to
     LR30.60 / LR30.72 / LR30.84                                                                      control the flow of material

     • Category 1
     • 12–40 hp tractors
     • Available in 6’ – 8’ widths
     • Tine beam designed for tough conditions
     • Optional gauge wheels add stability and
       depth control
     • Five forward and three reverse angles
       adapt to the job and conditions




                            Performance
                               Guide:
                        Ideal for landscaping,
                        seed bed preparation,
                         and removing rocks
                              and debris.



                                                                                 Medium-Duty model LR30.60 with optional gauge
                                                                                 wheels, and grader blade with end caps




     Medium duty LR30.72 with optional guage wheels, grader blade, and end cap


10
                                                                                                                                LANDSCAPE EQUIPMENT



   landsCaPe raKes
   heavy Duty
                                                                                                                       Heavy-duty tine beam
   LR40.84 / LR40.96
                                                                                                                       Heavy tine beam stands up to the
   • Category 1 or 2                                                                                                   toughest construction-grade projects.

   • 20–60 hp tractors
   • Available in 7’ & 8’ widths
   • Adjustable rake angles accommodate many
     projects and environments - 24 positions
   • High carbon spring steel tines hold their
     shape
   • Optional flip down grader blade adds grading
     and leveling capabilities
   • Rake can be offset for more versatility
   • Optional hydraulic rake angle changes
     positions quickly and easily
   • Dual gauge wheel or single tail wheel options




                              Single bolt attachment
                              Replace individual tines easily with
                              the slotted bolt mount.




                                                                                       Heavy-Duty model LR40.96 shown with optional
                                                                                       hydraulic angling capability and tailwheel




Light, StanDaRD, MeDiuM, anD heavy Duty LanDSCaPe RaKeS
Specifications                   LR10 .60                   LR20 .60       LR30 .60          LR30 .72       LR30 .84           LR40 .84               LR40 .96
 Rake width               5'                         6'                6'               7'              8'                7'                    8'
 Approximate weight       177 lbs.                   270 lbs.          305 lbs.         332 lbs.        359 lbs.           377 lbs.             405 lbs.
 Rake angle positions     5 fwd-5 rev                5 fwd-3 rev       5 fwd-3 rev      5 fwd-3 rev     5 fwd-3 rev        360˚                 360˚
 Angle increments         15˚                        15˚               15˚              15˚             15˚                15˚                  15˚
 Offset                   –                          –                 –                –               –                  8", 15" & 22"        8", 15" & 22"
                                                                                                                           left or right        left or right
 Tines                    5/16" x 1"                 5/16" x 1"        5/16" x 1"       5/16" x 1"      5/16" x 1"         5/16" x 1"           5/16" x 1"
                          spring-steel               spring-steel      spring-steel     spring-steel    spring-steel       spring-steel         spring-steel
 Gauge wheels             optional                   optional          optional         optional        optional           optional             optional
 Flip down grader blade   –                          –                 optional         optional        optional           optional             optional
 Grader blade end caps    –                          –                 optional         optional        optional           optional             optional
 Tailwheel                –                          –                 –                –               –                  optional             optional
 Hydraulic angle          –                          –                 –                –               –                  optional             optional
 ASAE quick hitch         yes                         yes              yes              yes             yes                no                   no
 compatible
 Parking stand            yes                         yes              yes              yes             yes                yes                  yes
 Tractor hitch            Cat. 0, Lmtd. 1, & 1       Cat. 0 & 1        Cat. 1           Cat. 1          Cat. 1             Cat. 1 & 2           Cat. 1 & 2
 Tractor engine hp        up to 25 hp                12–40 hp          12–40 hp         20–40 hp        20–40 hp           20–60 hp             20–60 hp

                              L I G H T              STANDARD                         M E D I U M                                     H E A V Y

                                                                                                                                                                 11
     PulVeriZers
     Overview
     McCormick by Woods professional-grade pulverizers loosen, level and pulverize a wide variety of materials. They feature
     tough H-beam construction with heat-treated steel pins welded into the roller for years of superior performance. Add a
     second roller to any model to double your pulverizing action and create a smoother finish.



     StanDaRD Duty
     • Category 1
     • 15–45 hp tractors
     • Available in 4’ & 5’ widths                                     Standard spikes
     • Rigid, 10-inch H-beam construction provides                     Even the standard spike is
       weight of 49 pounds per foot                                    impressive — 5/8” x 8” of
                                                                       steel for years of dependable
     • Two, 150-pound compression springs force                        performance.
       roller pins into the soil for deep penetration
       and constant contact
     • 5/8 x 8-inch hardened steel spikes break up
       even hard-packed soil
     • Model SP10.48 is great for use on
       subcompact or compact tractors




                                                                       Big teeth
                                                                       Optional reversible 13-inch hardened
                                                                       steel spikes are five inches longer
                                                                       than standard
                          Performance Guide:
                           Grooming and soil
                              penetration.




         Welded heat-treated pins
         Durable 3/8 x 1-1/8-inch, high-carbon
         steel pins ensure cloddy and hard packed
         soil is completely pulverized.




                                         Standard duty model SP10.60




12
                                                                                                                                                                 LANDSCAPE EQUIPMENT




 PulVeriZers
 heavy Duty SeRieS
 • Category 1
 • 30–65 hp tractors
 • Available in 6’ & 7’ widths
 • Self-aligning 1-inch bearings mean less
   down time
 • A 12” wide, flange H-beam frame provides
   weight of 53 pounds per foot
 • “Big Tooth” models are 1/2” x 2” x 13”
   hardened steel spikes that rip into heavy-
   duty jobs




                                                                               Heavy duty model SP20.84 with optional second roller


  Second Roller Kits – All Models**                    4’                            5’                            6’                            7’
  Approximate weight                           105 lbs.                   125 lbs.                      145 lbs.                      165 lbs.
  Roller diameter                              6-5/8" OD                  6-5/8" OD                     6-5/8" OD                     6-5/8" OD
  Roller pins                                  3/8" dia. x 1-1/8"         3/8" dia. x 1-1/8"            3/8" dia. x 1-1/8"            3/8" dia. x 1-1/8"
  Springs                                      (2)75 lb. comp.            (2)75 lb. comp.               (2)75 lb. comp.               (2)75 lb. comp.

 **Not for use on subcompact tractors.



  Specifications                       SP10 .48                   SP10 .60                      SP20 .72                 SP20 .72B                    SP20 .84                      SP20 .84B

  Working width                  4’                         5’                            6'                            6’                            7’                       7’

  Overall width                  54"                        66"                           78"                           78"                           90"                      90"

  Overall height                 36"                        36"                           36"                           36"                           36"                      36"

  Depth, front to back           28.3"                      28.3"                         30-1/2"                       30-1/2"                       30-1/2"                  30-1/2"

  Approximate weight             480 lbs.                   550 lbs.                      715 lbs.                      735 lbs.                      784 lbs.                 805 lbs.

                                 (9) 5/8" x 8", alloy       (11) 5/8" x 8", alloy         (14) 5/8" x 8", alloy         (14) 1/2" x 2" x 13",         (16) 5/8" x 8", alloy    (16) 1/2" x 2" x 13",
  Scarifying teeth-front
                                 steel                      steel                         steel                         hardened                      steel                    hardened

                                 (8) 5/8" x 8", alloy       (10) 5/8" x 8", alloy         (13) 5/8" x 8", alloy         (13) 1/2" x 2" x 13",         (15) 5/8" x 8", alloy    (15) 1/2" x 2" x 13",
  Scarifying teeth-rear
                                 steel                      steel                         steel                         hardened                      steel                    hardened

  Bearings                       1" self-aligning           1" self-aligning              1" self-aligning              1" self-aligning              1" self-aligning         1" self-aligning

  Big tooth (BT)                 –                          –                             –                             standard                      –                        standard

                                 3/8" x 1-1/8",             3/8" x 1-1/8",                3/8" x 1-1/8",                3/8" x 1-1/8",                3/8" x 1-1/8",           3/8" x 1-1/8",
  Roller pins
                                 hardened pins              hardened pins                 hardened pins                 hardened pins                 hardened pins            hardened pins

  H-beam dimensions              10" x 10", 49 lbs./ft.     10" x 10", 49 lbs./ft.        10" x 12", 53 lbs./ft.        10" x 12", 53 lbs./ft.        10" x 12", 53 lbs./ft.   10" x 12", 53 lbs./ft.

                                 (2)150 lbs.                (2)150 lbs.                   (2)150 lbs.                   (2)150 lbs.                   (2)150 lbs.              (2)150 lbs.
  Springs
                                 compression                compression                   compression                   compression                   compression              compression

  Tractor hitch                  Cat. limited 1* & 1        Cat. 1                        Cat. 1                        Cat. 1                        Cat. 1                   Cat. 1

  Tractor engine hp              up to 45 hp                up to 45 hp                   65 hp max.                    65 hp max.                    65 hp max.               65 hp max.

  ASAE quick-hitch
                                 yes                        yes                           yes                           yes                           yes                      yes
  compatible

*Requires optional Hitch Kit                STANDARD                                                                                     HEAVY

                                                                                                                                                                                                        13
         Turf renoVaTor/seeder
         Overview
         The turf renovator is a versatile, two-in-one landscape tool that can seed fresh soil or renovate existing lawns and pastures.
         Tapered steel pins on the front rollers agitate and prepare the ground. The seed box follows soil preparation with steady,
         even seeding. The back roller finishes the job with the right level of push to cover the seed. All this versatility without
         changing equipment! Simply engage the seed box drive mechanism to add seeding capabilities. Also available without the
         seed box.

         Features
         • Category 1
         • Up to 65 hp tractors
         • Available in 4’ – 6’ widths
         • Tapered seed box ensures even distribution of
           all seed
         • Welded, heat-treated spikes stay in place for
           years of reliable service and penetrate deeply
         • Metered seed cups and adjustable flow offer
           controlled distribution of seed
         • Wind guard assures even seed distribution
         • Two 150-pound compression springs force rear
           roller spikes into ground



     Performance                                                                            Model TR20.60
        Guide:
 Aerating and seeding
 soil for existing lawns
      and pastures.

                               Adjustable                                                                                            Seed box drive
                               front rollers                                                                                         mechanism
                               Two adjustable front                                                                                  The seed box drive mechanism
                               rollers can be angled                                                                                 is easily engaged or
                               up to 20° for mild to                                                                                 disengaged — no need to
                               aggressive soil agitation.                                                                            remove the seed box.

                                                                                                                                     Rollers utilize 1” self-aligning
                                                                                                                                     bearings.




          Specifications                                     TR20 .48                       TR20 .60                      TR20 .72

           Working width                              4'                            5'                            6'
           Overall width                              57"                           69"                           81"
           Working height                             41"                           41"                           41"
           Rollers-front                              (2) 8" dia. adjustable        (2) 8" dia. adjustable        (2) 8" dia. adjustable
           Rollers-rear                               (1) 8", straight              (1) 8", straight              (1) 8", straight
           Roller pins-front                          (128) 1/2" x 2" carb. steel   (160) 1/2" x 2" carb. steel   (192) 1/2" x 2" carb. steel
           Roller pins-rear                           (128) 1/2" x 2" carb. stee    (160) 1/2" x 2" carb. steel   (192) 1/2" x 2" carb. steel
           Approx. weight w/seed box                  820 lbs.                      920 lbs.                      1050 lbs.
           Seed box capacity                          3 bushel                      4 bushel                      5 bushel
           Tractor hitch                              category 1                    category 1                    category 1
           Tractor engine hp                          up to 65 hp                   up to 65 hp                   up to 65 hp
           ASAE quick hitch compatible                yes                           yes                           yes

14
                                                                                                                     LANDSCAPE EQUIPMENT




PosT Hole diggers
Overview
Our commitment to professional-grade, high quality equipment is evident in its line of post hole diggers. Heavy-duty welded
construction, a rugged gearbox with tapered roller bearings, spring-loaded seals, and forged steel teeth offer the durability you
need for big or small jobs whatever the soil conditions. Available in a three-point hitch for categories limited 1, 1 and 2 tractors, and
with a range of auger bit diameters to meet a variety of needs — whether it’s landscaping, farming, or commercial use. Options
include parking stand, auger extension, semi-double, and double flight augers, and down-pressure kits.


Light Duty
PD10.25 / PD10.35
• Designed to fit subcompact tractors with
  limited Category 1 hitches, as well as
                                                                                Performance
  compact tractors with Category 1 hitches
                                                                                   Guide:
• Choose 6”, 9”, or 12” diameter augers                                      For tree and shrub
                                                                           planting, deck or fence
                                                                             post installation, or
StanDaRD & heavy Duty                                                       other digging needs.

PD20.65 / PD30.95
• Category 0, Limited 1, 1 & 2
• 25–95 hp tractors
• Rugged gearbox is protected from dirt and
  moisture to handle heavy-duty projects
• Forged steel teeth, and tempered iron points
  dig deeply                                                                                              PD10.25 with semi-double flight auger

• Shear pin protected shaft extends the
                                                             Standard Auger Bits
  service life
• Owner’s manual tube retains manual for                      Size – Diameter x Length                               Model(s)
  quick retrieval                                              6" x 30"       standard-duty                   PD10.25
                                                               9" x 30"       standard-duty                   PD10.25
                                                              12" x 30"       standard-duty                   PD10.25
                                                                9" x 42"      standard-duty                   PD10.35
                                                               12" x 42"      standard-duty                   PD10.35
                                                                6" x 42"      heavy-duty                      PD10.35 / PD20.65 / PD30.95
                                                                9" x 42"      heavy-duty                      PD10.35 / PD20.65 / PD30.95
                                                               12" x 42"      heavy-duty                      PD10.35 / PD20.65 / PD30.95
                                                               14" x 42"      heavy-duty                      PD20.65 / PD30.95
                                                               18" x 42"      heavy-duty                      PD20.65 / PD30.95
                                                              24" x 42"       heavy-duty                      PD20.65 / PD30.95
                                                              30" x 42"       heavy-duty                      PD30.95
                                                               18" x 42"      planting with 9" pilot          PD20.65 / PD30.95
                                                              24" x 42"       planting with 9" pilot          PD20.65 / PD30.95


                                                             Specifications              PD10 .25        PD10 .35        PD20 .65     PD30 .95

                                                             Drive type               gearbox           gearbox         gearbox      gearbox

              The right bit                                  Tractor PTO speed        540 rpm           540 rpm         540 rpm      540 rpm
              Standard on every auger, a fish
              tail center point helps pull the               Approximate              weight 149 lbs. 160 lbs.          206 lbs.     210 lbs.
              bit into the ground
                                                             Tractor hitch            Cat. lim. 1 & 1   Cat. 1 & 2      Cat. 1 & 2   Cat. 1 & 2

                                                             Tractor horsepower       15–25 hp          20–35 hp        25–65 hp     35–95 hp


     PD10.35 with double flight auger                                                                                                             15
     roTary Tillers
     Overview
     Our line of rotary tillers couples the best design features with outstanding performance for the discerning user. Our tillers
     will handle all of your landscaping and gardening projects with ease. All models are available as either forward or reverse
     rotation tines. In many conditions, counter rotating tines on reverse rotation tillers will till deeper and faster than forward
     rotation models.


     Light Duty
     • Limited Category 1 & 1
     • Up to 30 hp tractors
     • Available in 44” – 60” widths
     • Specifically designed for subcompact tractors
     • The perfect tool for your estate-size property whether you’re re-tilling
       last years garden or breaking apart hard, compacted sod
     • Rugged steel tines can till seven inches into the toughest ground
     • Adjustable rear tailgate controls dirt leaving a smooth, flat seed bed

                                                                                                                Light duty model RT10.60R
     StanDaRD Duty
     • Category 1
     • 20 - 45 hp tractors
     • Available in 60” – 74” widths
     • Heavy duty rear tailgate evenly distributes dirt leaving a smooth,
       flat seed bed
     • Strong, 540 rpm, cast-iron gearbox withstands years of rugged use
     • Adjustable offset standard
     • Slip clutch drive line protection standard


                                                                        Tough tines
          Performance
                                                                        Rugged, steel tines can till up the
              Guide:                                                    toughest seed bed. Standard “C”
         Prepare soil in                                                tines are recommended for general
     flower beds, gardens,                                              purpose jobs and consume less
                                                                        horsepower while optional “L” tines
      landscape beds, and                                               provide better pulverization of soil.
       turf grass seed and
            sod beds.




                      Standard duty model RT20.74R

16
                                                                                                                        LANDSCAPE EQUIPMENT




    roTary Tillers




                                 Standard duty model RT20.74R pictured




Specifications                              RT10 .44/R        RT10 .52/R        RT10 .60/R     RT20 .60/R        RT20 .68/R       RT20 .74/R

Tilling width                          44"               52"               60"               60"               68"              74"


Weight                                 396 - 404 lbs.    426 - 435 lbs.    426 - 435 lbs.    597 - 604 lbs.    634 - 641 lbs.   665 - 672 lbs.


Maximum tilling depth                  7"                7"                7"                7-1/2"            7-1/2"           7-1/2"


Drive type                             #80 Chain         #80 Chain         #80 Chain         #80 Chain         #80 Chain        #80 Chain

Standard no. Of tines /                20 / 5            24 / 6            28 / 7            42/ 7             48/ 8            54 / 9
No. Of flanges
                                       4 C-Type          4 C-Type          4 C-Type          6 C-Type          6 C-Type         6 C-Type
No. Of tines per flange
                                       (6 opt.)          (6 opt.)          (6 opt.)          (6 opt.)          (6 opt.)         (6 opt.)

Rotor shaft rpm                        240               240               240               240               240              240

                                       Slip Clutch or    Slip Clutch or    Slip Clutch or    Slip Clutch or    Slip Clutch or   Slip Clutch or
Pto driveline protection
                                       Shear Bolt        Shear Bolt        Shear Bolt        Shear Bolt        Shear Bolt       Shear Bolt

Tractor pto speed - rpm                540               540               540               540               540              540

                                       Cast              Cast              Cast              Heavy-Duty        Heavy-Duty       Heavy-Duty
Gearbox housing
                                       Aluminum          Aluminum          Aluminum          Cast Iron         Cast Iron        Cast Iron

Gearbox drain plug                     Yes               Yes               Yes               Yes               Yes              Yes


Convertible side shift (right)         7.5"              11.5"             15.5"             15.5"             19.5"            22.5"


Quick hitch compatible                 Yes               Yes               Yes               Yes               Yes              Yes

                                       Limited Cat. 1    Limited Cat. 1    Limited Cat. 1    Cat. 1            Cat. 1           Cat. 1
Tractor hitch
                                       and Cat. 1        and Cat. 1        and Cat. 1

Tractor horsepower                     18 to 30 hp       18 to 30 hp       18 to 30 hp       20 – 45 hp        20 – 45 hp       20 – 45 hp


                                                     SUB-COMPACT                                              C O M P A C T

                                                                                                                                                 17
     sTuMP grinder
     Overview
     The PTO-powered stump grinders are built to perform — reducing tree stumps to mulch in minutes. They mount to the
     3-point hitch on 15 to 50 hp tractors and operate from the safety of the tractor seat. A slip clutch provides protection
     against abnormally severe shock loads. With a 44° swing arc, you won’t have to reposition the tractor unless working
     with a very large diameter stump. The slim design and long reach of this unit allows for operation in tight places.



     Features
     • Category 1 & 2
     • 15 – 50 hp tractors
     • Two hydraulic cylinders raise and lower the
       unit up to 16”
     • Twenty-four tough, carbide steel teeth cut
       bidirectional so that all teeth are engaging
       the stump
     • A 44° cutting arc handles stumps up to 32”
       in diameter without the need to reposition
       the tractor
     • Hinged debris shield allows easier grinding
       below ground level




                       Performance
                          Guide:                            Model SG20.50

                   Grinds tree stumps to
                    below ground level.                               Cutting teeth                    Two hydraulic
                                                                      Twenty-four tough, carbide       operating cylinders
                                                                      steel teeth cut bidirectional
                                                                      so that all teeth are engaging   SG20.50 - Two hydraulic
                                                                      the stump.                       operating cylinders raise and
                                                                                                       lower the unit up to 16”.


        fRaMe &
       StRuCtuRe




                                           Specifications                              SG20 .50

                                           Cutting wheel diameter                 20
                                           Cutting wheel speed                    1,037 rpm
                                           Cutter tip speed                       5,428 rpm
                                           Hub torque                             76-250 lbs-ft
                                           Approximate weight                     545 lbs.
                                           Tractor hitch                          Cat. 1 & 2
                                           Tractor PTO horsepower                 15–50 hp




18
                                                                                                    LANDSCAPE EQUIPMENT




disC HarroW / QuiCK HiTCH
Disk Harrow
The 6 and 7 disc harrows are designed specifically for homes, small farms, and nurseries requiring a durable tillage
tool that adds productivity to a tractor. Available in either 5, 6, or 7-foot widths, this disc harrow offers a choice — all
notched, or a combination of notched/smooth disc blades. Adjustment of gang tubes can be positioned at 0°, 7°, 14°,
or 21° angles.

MeDiuM Duty
• Category 1
• Up to 70 hp tractors
• 18” discs, either all notched or notched/smooth combination
• Angle adjustments of 0°, 7°, 14° and 21°
• Heavy-duty, 3” by 3” structural tubular construction
• Triple-sealed, self-aligning ball bearings
• ASAE quick hitch compatible



Specifications               DH20 .60C   DH20 .72C    DH20 .84C
                             DH20 .60N   DH20 .72N    DH20 .84N

 Width                       5'            6'           7'
 Disc diameter               18"           18"          18"
 Disc quantity               16            20           24
 Disc spacing                7-1/2"        7-1/2"       7-1/2"                     Disc Harrow model DH20.72C

 Approximate weight          735 lbs.      818 lbs.     900 lbs.
 Tractor hitch               Cat. 1        Cat. 1       Cat. 1
 Tractor engine horsepower   28-70 hp      32-70 hp     36-70 hp




Quick Hitch
The quick hitch makes easy work of changing from one 3-point attachment to another. When hooking up to many
implements, you never have to leave the tractor because lower hooks automatically lock implement into place.


MeDiuM Duty
• Category 1
• Heavy-duty steel construction with adjustable top link bracket
• 7/8” mounting pins and adapter bushings
• Lower arms lock automatically
• Fast, easy attach and release
• Designed to ASAE standards


Specifications
 Width                                   27-1/4"
 Tractor hitch                           Cat. 1
 Mounting pin diameter                   7/8                                                     Quick hitch
 Adapter bushing diameter                1-1/8"
 Color                                   black
 Approximate weight                      75 lbs.


                                                                                                                               19
     baCKHoes and loaders

     Our line of backhoes and loaders provide users with the ability to complete virtually every rugged job, while delivering
     years of worry-free service. Backed with a 2-year limited warranty*, our experience goes into every backhoe and loader
     made — making each of them an integral part of your tractor.


     McCormick by woods Backhoes
     Features
     • 25–55 hp tractors
     • Excavator style curved boom provides better
       visibility
     • Unique easy on/easy off 4-point mounting system
       available for many tractor models
     • Two-cylinder swing mechanism
     • Adjustable, high back, cushioned seat
     • Large, walk-through operator’s platform
     • Mountings compatible with 3-point or sub-frames
     • Construction grade Gannon® buckets
     LOaDeRS     attaChMentS



                                                                                Backhoe model BH10.108




                                                                                                   Mccormick by woods Loaders
                                                                                                   Features
                                                                                                   • 25–90 hp tractors (2WD & FWA)
                                                                                                   • Curved boom provides better visibility
                                                                                                   • Mid-attaching loader boom provides less
                                                                                                     obstruction along the side and front of tractor
                                                                                                   • Fast D-Tach loader
                                                                                                   • Parking stands stored in loader boom cross tube
                                                                                                   • Rod bucket level indicator
                                                                                                   • 4-bar bucket linkage allows for 35° bucket roll-
                                                                                                     back angle to carry full loads without loss
                                                                                                   • Quick attachment coupler system (standard on
                                                                                                     L10.96 and larger)



     Loader model L10.108


            * Our 2-Year Limited Warranty on backhoes, loaders, and mountings covers any defects in material and/or workmanship. Following the proper,
            recommended installation and normal use of a McCormick by Woods’ mounting and backhoe, or loader, if a tractor incurs damage resulting from the
            attachment, McCormick by Woods will cover the existing tractor warranty in the event the manufacturer voids its tractor warranty because of the
            attachment. Warranty does not cover any misuse or abusive conditions that could cause premature wear or damage to either attachment or tractor.




                   Contact your dealer or visit www.McCormickuSa.com to see our complete line of backhoes and loaders
20
                                                                                                      LANDSCAPE EQUIPMENT




finisH MoWers:
turf flex wing & Rear Discharge
McCormick by Woods offers a complete line of tractor-mounted finish mowers that cut quickly, efficiently, and beautifully,
year after year.
Available up to 84” cutting widths, these rear discharge series mowers leave a smooth cut and uniform distribution on
all types of grass including tough southern varieties. With a strong 8-gauge steel deck that withstands
commercial-duty workloads, these mowers also feature a powerful 60 hp gearbox with five-year limited
warranty and tough rear discharge blade spindles with three-year limited warranties.                             Performance
                                                                                                                            Guide:
                                                                                                                      Ideal for mowing
Features                                                                                                             large lawns, sports
• Cast-iron spindle sheaves with taper-lock                                                                           fields, and parks.
  bushings increase strength and improve
  performance
• Blade cross bar mounting system adds
  strength, mounting blades with two bolts each
• Tapered deck design trims close to objects
• Floating hitch flexes to allow the mower to
  better follow the terrain.
• Clevis style lower hitch points for easy tractor
  attachment
• Optional chain shielding attaches and
  detaches easily



                                                            Finish mower model FM20.72


Commercial grade Turf Flex Wing mowers are folding wing finish mowers                            Performance
featuring premium rear discharge mowing decks. Mower blade tip speeds                                Guide:
of 18,000 fpm deliver a superior finish mowing cut quality. These Turf Flex                   For wide area finish
                                                                                             mowing with compact
Wing mowers are equipped with ten caster wheels to precisely follow
                                                                                                and utility size
the contour of the ground. The features built into these                                            tractors
mowers assure the best performance available in
wide area finish mowers.

                                                                                                                         fRaMe &
                                                                                                                        StRuCtuRe




                                                                                  Turf Flex Wing model FM10.150



             Contact your dealer or visit www.McCormickuSa.com to see our complete line of finish mowers
                                                                                                                                           21
     snoW bloWers
     Tractor mounted snow blowers
     The McCormick by Woods line of powerful            Performance
                                                           Guide:
     snow blowers make quick work of moving
                                                        Remove large
     large amounts of snow. The SB10 and 20 series   amounts of snow - all
     feature a two stage design to allow more          types - quickly.
     throwing force with less horsepower than
     single stage snowblowers. These models are
     designed for both subcompact and compact
     tractors and are ruggedly equipped to handle
     all types of snow and conditions.




22
                                                                                                                           LANDSCAPE EQUIPMENT




snoW bloWers
SuBCOMPaCt, COMPaCt, anD heavy Duty SnOwBLOweRS

Specifications                     SB10 .54          SB10 .64          SB20 .74          SB20 .84          SB30 .84          SB40 .96          SB40 .108

Working width                54"               64"               74"               84"               84"               96"               108"

                                                                 76"               86"
Transport width              56"               66"                                                   87.7"             99.7"             111.7"

                                                                 26"
Working height               24"               24"                                 26"               28"               38"               38"

                                                                 592
Approximate weight           415               436                                 632               1,210 lbs.        1,420 lbs.        1,741 lbs.

                                                                 30–50
PTO horsepower               25 or less        15–35                               35–60             60–80             80–125            125–200


Tractor PTO speed            540 RPM           540 RPM           540 RPM           540 RPM           540 RPM           540/1000 RPM      540/1000 RPM

Hitch (All models are ASAE                                       Cat. 1 & 2        Cat.1 & 2
                             Cat. 1            Cat. 1                                                Cat. 2 & 3        Cat. 2 & 3        Cat. 2 & 3
Quick Hitch Compatible)
                                                                 2300
Driveline                    2300              2300                                2300              2400              2400              2400

                                                                 shear bolt
Driveline protection         shear bolt        shear bolt                          shear bolt        shear bolt        shear bolt        shear bolt

                                                                 gearbox
Drive type–fan               gearbox           gearbox                             gearbox           gearbox           gearbox           gearbox

                                                                                   gearbox & chain
Drive type–auger             gearbox & chain   gearbox & chain   gearbox & chain                     gearbox & chain   gearbox & chain   gearbox & chain


Number of feeder augers      1                 1                 1                 1                 1                 2                 2

                                                                 .313" x 2"
Auger flighting              .313" x 2"        .313" x 2"                          .313" x 2"        .313" x 3"        .313" x 3"        .313" x 3"


Chute rotation               270°              270°              270°              270°              200°, hydraulic   200°, hydraulic   200°, hydraulic


Hydraulic chute rotator      optional          optional          optional          optional          standard          standard          standard


Fan diameter                 22"               22"               24"               24"               34"               34"               34"

                                                                                   1/4" plate
Fan blades thickness         7 gauge           7 gauge           1/4" plate                          1/4" plate        1/4" plate        1/4" plate


Fan housing thickness        12 gauge          12 gauge          10 & 12 gauge     10 & 12 gauge     7 & 10 gauge      7 & 10 gauge      7 & 10 gauge

                             12 gauge          12 gauge
Main housing thickness                                           12 gauge          12 gauge          7 gauge           7 gauge           7 gauge

                                               12 gauge
Side sheet thickness         12 gauge                            10 gauge          10 gauge          1/4"              1/4"              1/4"


Replaceable skids            yes               yes               yes               yes               yes               yes               yes


Adjustable skids             yes               yes               yes               yes               yes               yes               yes


Replaceable cutting edge     no                no                no                no                yes               yes               yes


Telescoping 3-point hitch    no                no                no                no                yes               yes               yes


                                   SUBCOMPACT                           C O M P A C T                             H E A V Y         D U T Y




                                                                                                                                                           23
                         McCormick by woods
                        Implements & Attachments

McCormick USA and Woods Equipment Company have formed a strategic partnership.
This alliance covers a full line of agriculture and landscape equipment including cutters,
finish and zero-turn mowers, front-end loaders, backhoes, snow blowers, and assorted
scrapers, discs, rakes, post hole diggers, stump grinders and blades.
“Being able to offer quality Woods products in red with the McCormick brand will truly
strengthen our full offering of compact, utility and Ag tractors. Now our customers
can get a single brand solution for their tractor and attachment needs.”
                                        – Doug Rehor CEO, McCormick International USA



“Woods is proud to be affiliated with such a well-recognized brand in partnering with
McCormick. Blending OEM and dealer-direct customers allows us to optimize our cost
structure in building the highest-quality equipment in the market. McCormick is poised
for growth and Woods is prepared to be an integral part of their presence in the
market place.”
                                        – Jerry Johnson President, Woods Products Division




About McCormick USA, Inc .
McCormick International USA, Inc . is a division of ARGO Tractors and part of
ARGO S .p .A . which manufactures a full line of tractors built on more than 170
years of heritage . From the world’s first practical reaper in 1831, through the long
distinguished line of tractors that followed, the McCormick brand epitomizes
quality, craftsmanship, and innovative design . For more information, visit www .
McCormickUSA .com

About Woods Equipment Company
Woods Equipment Company, headquartered in Oregon, Illinois, is a leading full-
line manufacturer of high-quality attachments and implements as well as a leading
distributor of aftermarket parts . Woods serves a dealer network of agricultural,
landscape, and construction professionals with products marketed under the brand
names Woods®, Alitec®, Central Fabricators®, Gannon®, Wain-Roy®, WoodsCare™,
and TISCO® . With a reputation for durability and reliability, Woods’ products are
manufactured to American Welding Society standards, tested in rigorous real-life
conditions, and comply with recommended industry safety standards . For more
information, visit www .WoodsEquipment .com .




                                        McCORMICK and the McCORMICK LOGO are registered trademarks of McCormick International USA, Inc. in the U.S. and/or
    McCormick international uSa, inc.   other countries. LANDINI and the LANDINI LOGO are registered trademarks of McCormick International USA, Inc. in the U.S.
                                        and/or other countries. WOODS and the WOODS LOGO are registered trademarks of Woods Equipment Company. Gannon
    2590 Breckinridge Blvd.             and all other trademarks, trade names, or service marks that appear in this brochure are the property of their respective
    Duluth, GA 30096                    companies or mark holders. © 2011 McCormick International USA, Inc. All rights reserved. 8.11 v1
    866.327.6733                        WARNING! Some images may show safety equipment removed to provide a better view. Equipment should never be
                                        operated without required safety equipment. Always operate machines in accordance with supplied operator’s manuals.
    McCormickUSA.com                    Some machines in this brochure may be shown with optional equipment. Specifications subject to change without notice.

				
DOCUMENT INFO
Categories:
Tags:
Stats:
views:2622
posted:9/20/2011
language:English
pages:24