Docstoc

Tool Catalog.indd

Document Sample
Tool Catalog.indd Powered By Docstoc
					    Tool Catalog
     Tool Catalog
                      2008




Tel: (626) 792-7384          FlandersCompany.com
Fax: (626) 792-5341                                REV. 06-02-08
                             TABLE OF CONTENTS
THREAD REPAIR ................................................................. 3-7
    TIME SERT .......................................................................3-5
    HELICOIL ..........................................................................6-7
VALVE SEAT CUTTERS ...................................................... 8-18
    KITS .............................................................9-14
    OPEN STOCK ...............................................15-18
HONES ......................................................................... 19-24
    BRUSHES......................................................................19-20
    HONES .........................................................................21-23
    STONES ............................................................................24
CARBURETOR ................................................................ 25-27
IGNITION............................................................................. 28
SPARK PLUG WRENCHES ................................................ 29-30
UPPER ENGINE .............................................................. 31-35
PULLERS....................................................................... 36-47
    MAG BY SIZE .....................................................................37
    MAG BY APPLICATION .....................................................38-42
    BEARING, CLUTCH .........................................................42-43
LOWER ENGINE.............................................................. 44-45
SUSPENSION .................................................................. 46-52
SAFETY WIRE ..................................................................... 53
WRENCHES & SPECIALTY TOOLS ...................................... 54-62
PLIERS ............................................................................ 63
BRAKES............................................................................. 64
WHEEL & TIRE .............................................................. 65-75
    COATS TIRE CHANGER ...................................................65-66
    TRUING STAND & SPOKE WRENCHES ....................................67
    TOOLS & SUPPLIES ........................................................68-75
CHAIN TOOLS ................................................................ 76-78
SHOP SUPPLIES & EQUIPMENT ......................................... 79-85
    PARTS BOXES ....................................................................79
    CABLE RACKS ....................................................................80
    DISPLAY HOOKS ............................................................81-82
    MICROFICHE BULBS.............................................................83
    CATALOG HOLDERS ........................................................84-85
                                                   Thread Repair
                                  Time-Sert Thread Repair Kits
                   Time-Sert uses the solid insert method of thread repair. Kits are designed for hand use with a
                   suitable tap wrench. Power tools may be used but, extra care nust be used on small sizes. All
                   kits are complete with drill, counterbore, special tap, installation tool, and five Parkerized steel
                   inserts (Except Spark Plug Kits). Spark plug kits do not contain inserts because of the various
                   lengths available.




Timesert Thread Repair Kits & Parts
                                              Inserts Only
Thread Size &                                 SOLD EACH          Counter                   Installation    Drill              Stainless
Insert Length                  Kit No.     For Pack, Order 10     Bore           Tap           Tool        Size      Wrench    Insert
Metric Sizes
4 x 0.7 x 6                 545-00047        545-01047
4 x 0.7 x 4                                  545-01046
5 x 0.8 x 7.6               545-00058        545-01058         545-02058 545-03058 545-04058                  8               545-01059
6 x 1 x 9.4                 545-00061        545-01061         545-02061 545-03061 545-04061                  D               545-01065
6 x 1 x 12                                   545-01062                                                        D               545-01066
7 x 1 x 10                  545-00071        545-01071         545-02071 545-03071 545-04071                  L
8 x 1.25 x 11.7             545-00082        545-01082         545-02082 545-03082 545-04082                  P               545-01085
8 x 1.25 x 9                                 545-01081
8 x 1.25 x 16.2                              545-01083                                                        P               545-01086
8 x 1.25 x 18                                545-01084                                                        P
9 x 1.25 x 20               545-00091        545-01091                                                        U
9 x 1.25 x 13                                545-01092                                                        U
9 x 1.25 x 18                                545-01093                                                        U
10 x 1.25 x 14              545-00112        545-01112         545-02112 545-03112 545-04112 13/32                            545-01113
10 x 1.25 x 16.2                             545-01119
10 x 1.25 x 20                               545-01116
10 x 1.5 x 14               545-00115        545-01115         545-02115 545-03115 545-04115 13/32                            545-01117
10 x 1.5 x 9.4                               545-01114
10 x 1.5 x 20                                545-01118
12 x 1.25 x 15              545-00211        545-01214
12 x 1.25 x 9                                545-01211
12 x 1.5 x 16.2             545-00215        545-01215         545-02215 545-03215 545-04215
12 x 1.5 x 9.2                               545-01212
14 x 1.5 x 9.4              545-00417        545-01417         545-02417 545-03417 545-04417
14 x 1.5 x 12.7                              545-01418
14 x 1.5 x 17.8                              545-01419
14 x 1.5 x 28                                545-01420
                                   Dealer Note: For Quantity Break, order inserts in multiples of 10 per size
                            Time Sert® taps are unique sizes and are intended for use only with Time Sert® inserts
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                 Fax: (626) 792-5341
                                                                                                 www.FlandersCo.com
                                                                                                                                          3
                                                Thread Repair
    Timesert Thread Repair Kits & Parts                           . . . continued
                                          Inserts Only
                                          SOLD EACH
        Thread Size &                                         Counter                   Installation    Drill                 Stainless
         Insert Length     Kit No.     For Pack, Order 10      Bore           Tap           Tool        Size       Wrench      Insert
    Spark Plug Sizes
    10 x 1 x 1/2”        545-00110*      545-01110         545-02110 545-03110 545-04110                No        545-02111
    10 x 1 x 19/32”      545-00110*      545-01111         545-02110 545-03110 545-04110                Drill     545-02111
    12 x 1.25 x 1/2”     545-00212*      545-01210         545-02212 545-03212 545-04212               Req.       545-02211
    12 x 1.25 x 3/4”     545-00212*      545-01213         545-02212 545-03212 545-04212                for       545-02211
    14 x 1.25 x 3/8”     545-00412*      545-01413         545-02412 545-03412 545-04412               Spark      545-02411
    14 x 1.25 x 7/16”    545-00412*      545-01414         545-02412 545-03412 545-04412               Plugs      545-02411
    14 x 1.25 x 1/2”     545-00412*      545-01415         545-02412 545-03412 545-04412                          545-02411
    14 x 1.25 x 3/4”     545-00412*      545-01416         545-02412 545-03412 545-04412                          545-02411
                                 *Spark plug kits do NOT contain inserts. You MUST order separately.

                                Dealer Note: For Quantity Break, order inserts in multiples of 10 per size
                         Time Sert® taps are unique sizes and are intended for use only with Time Sert® inserts

    American Sizes
    10 x 24 x .300”      545-05124         545-06124        545-07124 545-08124 545-09124              13/64
    10 x 24 x .370”                                                                                                           545-06421
    10 x 32 x .300”                       545-06132
    1/4 x 20 x .380”     545-05420        545-06420         545-07420 545-08420 545-09420 17/64
    1/4 x 20 x .280”                      545-06418
    1/4 x 28 x .380”     545-05428        545-06428         545-07428 545-08428 545-09428                  G
    5/16 x 18 x .450”    545-05518        545-06518         545-07518 545-08518 545-09518 21/64                               545-06519
    5/16 x 24 x .450”    545-05524        545-06524         545-07524 545-08524 545-09524                  P
    3/8 x 16 x .520”     545-05616        545-06616         545-07616 545-08616 545-09616                  X
    3/8 x 16 x .312”                      545-06612
    3/8 x 16 x .520”                      545-06614                                                                           545-06617
    3/8 x 16 x .750”                      545-06618
    3/8 x 16 x 1.20”                      545-06621
    3/8 x 24 x .520”     545-05624        545-06624         545-07624 545-08624 545-09624                  W
    7/16 x 14 x .600”    545-05714        545-06714         545-07714 545-08714 545-09714 29/64                               545-06715
    7/16 x 20 x .600”    545-05720        545-06720         545-07720 545-08720 545-09720 29/64
    1/2 x 13 x .650”     545-05813        545-06813         545-07813 545-08813 545-09813 33/64
    1/2 x 20 x .650”     545-05820        545-06820         545-07820 545-08820 545-09820 33/64
                                Dealer Note: For Quantity Break, order inserts in multiples of 10 per size
                         Time Sert® taps are unique sizes and are intended for use only with Time Sert® inserts


                                                                                                                                 REV. 06-02-08



4             (626) 792-7384
           www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                                    Thread Repair
TIME-SERT® FORD TRITON M14x1.25
SPARK PLUG BLOW OUT REPAIR
546-05553
• This kit will fix Ford heads with a straight
  section between the threads and taper seat.
• Fits models with 1.9, 3.8, 4.6, 5.4,
  6.8 liter engines.

• Kit includes:
  5 - Inserts M14 x 1.25
  1 - Wrench
  1 - Reamer
  1 - Tap
  1 - Driver
  1 - Setting tool
  1 - Triton Counterbore
  1 - Hex key 1/8
  1 - Hex key 3/16
  1 - Sealer


Additional Inserts SOLD EACH
546-51459 Triton Inserts M14x1.25
Time Sert
Kit Examples:
   Drill out          Counter       Thread      Install insert
  damaged             bore for       with         to restore
   thread            insert top   special tap        thread




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                    Fax: (626) 792-5341
                                                                    www.FlandersCo.com
                                                                                          5
                                                    Thread Repair
                                     Heli-Coil - Thread Repair Kits
                        Drill out stripped
                        threads with speci-                                             Note: Drills are not supplied with
                                                 Install Heli-coil insert
                        fied size drill.                                                 kits. The drill size is shown for your
                                                 to reduce to original
                                                                                        convenience. They may be or-
                                                 thread size.
                        Tap with special                                                dered as shown in the Tool section
                        Heli-coil tap.                                                  of this catalog.

    Heli-Coil® Thread Repair Products
                                                  Qty.        Inserts Only                               Replacement
    Thead Size &                                Inserts      SOLD EACH          Replacment Tap         Installation Tool
    Insert Length              Kit Part No.      in Kit     For Pack, Order          Only                    Only                Drill Size
                                                                    10
    Metric Sizes
    5 x 0.8 x 7.5              540-55450          12          540-10850            540-05705             540-37453               13/64”
    6 x 1.0 x 9                540-55460          12          540-10860            540-05706             540-37460                1/4”
    6 x 1.0 x 18                                              540-10870            540-05706             540-37460                1/4”
    7 x 1.0 x 10.5             540-55470          12          540-10861            540-05707             540-37470               9/32”
    8 x 1.25 x 12              540-55480          12          540-10880            540-05708             540-37480               21/64”
    8 x 1.25 x 24                                             540-10882            540-05708             540-37480               21/64”
    10 x 1.25 x 15             540-55431          12          540-46491            540-05751             540-46401               13/32”
    10 x 1.25x 25              540-46471          10          540-46492            540-05751             540-46401               13/32”
    10 x 1.5 x 15              540-55491          12          540-10910            540-05701             540-37491               13/32”
    12 x 1.5 x 18              540-55442          6           540-37451            540-49762             540-49732               31/64”
    12 x 1.75 x 18             540-55492          6           540-10912            540-20872             540-37492               31/64”
    14 x 1.5 x 21              540-55444                      540-37454            540-49764             540-49734               9/16”
    Spark Plug Sizes
    10 x 1 x 19/32”                                            540-04255             540-10301              540-49711
    10 x 1 x 1/2”              540-55231           24          540-04744             540-10301              540-49711               No
                                                                                                                                   drill
    12 x 1.25 x 1/2”           540-55232         12 of         540-04821             540-10302              540-49712
                                                                                                                                 required
    12 x 1.25 x 3/4”           540-55232         each          540-04822             540-10302              540-49712               for
    14 x 1.25 x 3/8”           540-55234          6 of         540-05120             540-10304              540-49714             spark
    14 x 1.25 x 7/16”          540-55234         each          540-05130             540-10304              540-49714              plug
                                                  size                                                                            repair
    14 x 1.25 x 1/2”           540-55234                       540-05133             540-10304              540-49714
    14 x 1.25 x 3/4”           540-55234                       540-05131             540-10304              540-49714
                                     Dealer Note: For Quantity Break, order inserts in multiples of 10 per size
                              Heli-Coil® taps are unique sizes and are intended for use only with Heli-Coil® inserts

                                                            Metric Shop Kit
                                                            540-46500
                                                            Contains 6 x 1 kit; 8 x 1.25 kit; 10 x 1.25 kit in 15 &
                                                            25m lengths. All taps and tools in shop style box.




                                                                                                                                         REV. 06-02-08



6             (626) 792-7384
           www.FlandersCompany.com
                                                                                                  Fax: (626) 792-5341
                                                                                                  www.FlandersCo.com
                                                   Thread Repair
                                   Heli-Coil - Thread Repair Kits
                      Drill out stripped
                      threads with speci-                                            Note: Drills are not supplied with
                                              Install Heli-coil insert
                      fied size drill.                                                kits. The drill size is shown for your
                                              to reduce to original
                                                                                     convenience. They may be or-
                                              thread size.
                      Tap with special                                               dered as shown in the Tool section
                      Heli-coil tap.                                                 of this catalog.


                                               Qty.        Inserts Only                               Replacement
Thead Size &                                 Inserts      SOLD EACH          Replacment Tap         Installation Tool
Insert Length                Kit Part No.     in Kit     For Pack, Order          Only                    Only            Drill Size
                                                                 10
American Sizes
8 x 32 x .246”              540-55212           12          540-11852             540-11872              540-22882
10 x 24 x .285”             540-55213           12          540-11853             540-11873              540-22883            13/64”
10 x 32 x .285”             540-55283           12          540-11913             540-08213              540-22993            13/64”
1/4” x 20 x .375”           540-55214           12          540-11854             540-08194              540-52884            17/64”
1/4” x 24 x .375”           540-55404           12          540-03894             540-04294              540-30104            17/64”
1/4” x 28 x .375”           540-55284           12          540-11914             540-08214              540-22994            17/64”
5/16” x 18 x .469”          540-55215           12          540-11855             540-08195              540-52885            21/64”
5/16” x 24 x .469”          540-55285           12          540-11915             540-08215              540-22995            21/64”
3/8” x 16 x .562”           540-55216           12          540-11856             540-08196              540-52886            25/64”
3/8” x 20 x .562”           540-55406           12          540-03896             540-05886              540-49476            25/64”
3/8” x 24 x .562”           540-55286           12          540-11916             540-08216              540-22996            25/64”
7/16” x 14 x .656”          540-55217           6           540-11857             540-08197              540-52887            29/64”
7/16” x 16 x .656”          540-55407           6           540-03897             540-05847              540-49477            29/64”
7/16” x 20 x .656”          540-55287           6           540-11917             540-08217              540-22997            29/64”
1/2”x 13 x .750”            540-55218           6           540-11858             540-08198              540-52888            17/32”
1/2”x 20 x .750”            540-55288           6           540-11918             540-08218              540-22998            33/64”
5/8” x 18 x .938”           540-55289           6           540-12010             540-91931              540-22999            41/64”
                                  Dealer Note: For Quantity Break, order inserts in multiples of 10 per size
                           Heli-Coil® taps are unique sizes and are intended for use only with Heli-Coil® inserts




REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                 Fax: (626) 792-5341
                                                                                                 www.FlandersCo.com
                                                                                                                                       7
                                              Valve Seat Cutters
             Hereʼs how Neway produces precision valve seats
                                                                First cut: Place the pilot in valve guide with the top of the
                                                                collet located inside the valve guide. Then place the bottom
                                                                narrowing cutter over the pilot. Turn with a wrench using a
                                                                small amount of pressure.


                                                                Second cut: Follow the same procedure with the top
                                                                narrowing cutter.
               Bottom
               Narrowing
               (First Cut)                                      Third cut: Select the seat cutter with the proper angle.
                                                                Then cut the seat to the desired width.




           Top                                                                                   1 degree
           Narrowing                   Valve Seat
                                                                                                 Interference Angle
           (Second Cut)                (Third Cut)
    Proper Seat Angle:            We subscribe to the “interference angle” method
    of cutting valve seats. This requires that the angle on the seat and on the
    valve face be slightly different, usually about 46 degrees while resurfacing the
    valve face at 45 degrees.

    Exact Seat Surface Finish:                A valve can function properly only
    when it has complete closure on the valve seat. We recognize that in order                    Neway long life
    for this to be accomplished effectively, it is necessary to go farther than just              Tungsten Carbide
    mating the two parts. The valve must be able to peen itself into the seat. Our
    valve seat cutter leaves a finish rough enough to accomplish this. By way of
    a comparison, the finish is about the same as the finish found on a honed
    cylinder wall.
                                                                                                    Grinding wheels
    A True Flat Seat:        Each tungsten carbide cutter blade is precisely                        continually wear away
    machined to insure a flat surface. This flatsurface eliminates the concave and
    convex seats that so often result from using a grinding stone.



     Head Stands
     721-17050
     Engine heads of any shape can be set quickly
     onto a pair of these welded steel head stands




                                                                                                                                REV. 06-02-08



8              (626) 792-7384
            www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                      Valve Seat Cutter Kits
721-82574 General Motorcycle Kit
Neway
 more. Will cut seats where valve sizes range from 19mm (3/4”) to 51 mm (2”).

Flanders No.       Neway No.   Description                            Flanders No.   Neway No.       Description
Cutters                                                               Solid Pilots
720-10131          131         Blades fixed at O.D. of .850” 45°       720-41023      100-4,0         4,0mm dia.
720-10132          132         Blades fixed at O.D. of .830” 32°       720-41024      100-4,02        4,02mm dia.
720-10133          133         Blades fixed at O.D. of .874” 60°       720-41014      100-4,5         4,5mm dia.
720-10122          122         1” dia. 45°                            720-41013      100-4,52        4,52mm dia.
720-10123          123         1” dia. 31°                            720-41012      100-5,0         5,0mm dia.
720-10111          111         1” dia. 60°                            720-41031      100-5,02        5,02mm dia.
720-10120          120         1” dia. 15°                            720-41009      100-5,5         5,5mm dia.
720-10270          270         1-1/4” dia. 60°                        720-41010      100-5,52        5,52mm dia.
720-10607          607         1-1/4” dia. 30°                        720-41002      100-6,0         6,0mm dia.
720-10608          608         1-1/4” dia. 45°                        720-41011      100-6,6         6,6mm dia.
720-10205          205         1-1/2” dia. 60°                        720-59498      140-4,5         4,5mm dia
720-10622          622H        1-1/2” dia. (short hub) 31° x 46°      720-59501      140-5,0         5,0mm dia.
720-10293          293         1-3/4” dia. 60°                        720-59502      140-5,5         5,5mm dia.
720-10642          642H        1-3/4” dia. (short hub) 31° x 46°      720-59505      140-6,0         6,0mm dia.
Accessories                                                           720-59506      140-6,6         6,6mm dia.
720-91537          TW505       T-Wrench                               720-59507      140-6,98        6,98mm dia.
720-90542          TW503-1     Adaptor, 1/2” to 3/8”                  720-59508      140-7,0         7,0mm dia.
721-49700          CA497       Case                                   720-59509      140-7,02        7,02mm dia.
720-82246          KACC26      Accessories Kit                        720-59511      140-8,0         8,0mm dia.
                                                                      720-59512      140-8,02        8,02mm dia.
                                                                      720-55162      140-5/16 -2     5/16”dia. -2
                                                                      720-55163      140-5/16 -1     5/16”dia. -1
                                                                      720-55160      140-5/16 Std    5/16”dia. Std.
                                                                      720-55164      140-5/16 +1     5/16”dia. +1
                                                                      720-51322      140-11/32 -2    11/32”dia. -2
                                                                      720-51323      140-11/32 -1    11/32”dia.-1,
                                                                      720-51320      140-11/32 Std   11/32”dia. Std.
                                                                      720-51324      140-11/32 +1    11/32”dia. +1
                                                                      720-53804      140-3/8 -1      3/8”dia. -1
                                                                      720-53800      140-3/8 Std     3/8”dia. Std.
                                                                      720-53805      140-3/8 +1      3/8”dia. +1
                                                                      720-53806      140-3/8 +2      3/8”dia. +2
                                                                      720-53807      140-3/8 +3      3/8”dia. +3
                                                                      720-53808      140-3/8 +4      3/8”dia. +4
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                          Fax: (626) 792-5341
                                                                                          www.FlandersCo.com
                                                                                                                       9
                                          Valve Seat Cutter Kits
     721-82600 Kit for Motocross Bikes                                     721-82563 Japanese Motorcycle Kit
     For use on all popular motocross bikes. Additional cutters required   For use on most metric motorcycles and ATVs, Japanese and
     where valve sizes are smaller than 22mm (e.g. Honda CRF 50).          European. Will cut seats where valve sizes range from
     For KTM add two 6mm pilots: 100-6.0 and 140-6.0.                      19mm (3/4”) to 44mm (1-3/4”).
     Flanders No. Neway No. Description                                    Flanders No.      Neway No. Description
     Cutters                                                               Cutters
     720-10122 122               1” dia. 45˚                               720-10131         131         Blades fixed at O.D. of .850” 45˚
     720-10123 123               1” dia. 31˚                               720-10132         132         Blades fixed at O.D. of .830” 32˚
     720-10111 111               1” dia. 60˚                               720-10133         133         Blades fixed at O.D. of .874” 60˚
     720-10607 607               1-1/4” dia. 30˚                           720-10122         122         1” dia. 45˚
     720-10608 608               1-1/4” dia. 45˚                           720-10123         123         1” dia. 31˚
     720-10270 270               1-1/4” dia. 60˚                           720-10111         111         1” dia. 60˚
     720-10626 626               1-1/2” dia. 30˚ x 45˚                     720-10120         120         1” dia. 15˚
     Solid Pilots                                                          720-10270         270         1-1/4” dia. 60˚
     720-1023        100-4.0     4mm dia.                                  720-10607         607         1-1/4” dia. 30˚
     720-41014 100-4.5           4.5mm dia.                                720-10608         608         1-1/4” dia. 45˚
     720-41012 100-5.0           5mm dia.                                  720-10205         205         1-1/2” dia. 60˚
     720-59498 140-4.5           4.5mm dia.                                720-10626         626         1-1/2” dia. 30˚ x 45˚
     720-59501 140-5.0           5.0mm dia.                                Solid Pilots
     720-59502 140-5.5           5.5mm dia.                                720-41023         100-4.0 4.0mm dia.
     Accessories                                                           720-41014         100-4.5 4.5mm dia.
     720-91537 TW505              T-Wrench                                 720-41012         100-5.0 5.0mm dia.
     720-90542 TW503-1 Adaptor, 1/2” to 3/8”                               720-41009         100-5.5 5.5mm dia.
     721-49700 CA497             Case                                      720-41010         100-5.52 5.52mm dia.
     720-82246 KACC26            Accessories Kit                           720-41002         100-6,0 6,0mm dia.
                                                                           720-41011         100-6,6 6,6mm dia.
                                                                           720-59501         140-5.0 5.0mm dia
                                                                           720-59502         140-5.5 5.5mm dia.
                                                                           720-59506         140-6,6 6,6mm dia.
                                                                           720-59507         140-6,98 6,98mm dia.
                                                                           720-59508         140-7,0 7,0mm dia.
                                                                           720-59509         140-7,02 7,02mm dia.
                                                                           720-59511         140-8,0 8,0mm dia.
                                                                           720-59512         140-8,02 8,02mm dia.
                                                                           Accessories
                                                                           720-91537         TW505        T-Wrench
                                                                           720-90542         TW503-1 Adaptor, 1/2” to 3/8”
                                                                           721-49700         CA497       Case
                                                                           720-82246         KACC26 Accessories Kit

                                                                                                                                   REV. 06-02-08



10             (626) 792-7384
            www.FlandersCompany.com
                                                                                              Fax: (626) 792-5341
                                                                                              www.FlandersCo.com
                                   Valve Seat Cutter Kits
721-82650 Japanese M/C/ATV/Marine Kit                             721-82299 Kit for BMW
This kit covers the most commonly serviced motorcycle, ATV, and   Flanders No. Neway No.              Description
outboard marine engines. The operating range, in terms of valve   Cutters
size, is from 22mm (.870”) to 36mm (1.420”). This kit is not as
                                                                  720-10122        122                1” dia. 45˚
comprehensive as the General Japanese Motorcycle Kit.
                                                                  720-10125        125                1” dia. 75˚
Flanders No. Neway No.            Description
                                                                  720-10126        126                1” dia. 30˚
Cutters
                                                                  720-10212        212                1-1/4” dia. 1 5˚ x 75˚
720-10122         122             1” dia. 45˚
                                                                  720-10607        607                1-1/4” dia. 30˚
720-10123         123             1” dia. 31˚
                                                                  720-10608        608                1-1/4” dia. 45˚
720-10111         111             1” dia. 60˚
                                                                  720-10216        216                1-1/2” dia. 75˚
720-10270         270             1-1/4” dia. 60˚
                                                                  720-10623        623                1-1/2” dia. 1 5˚ x 30˚
720-10607         607             1-1/4” dia. 30˚
                                                                  720-10635        635                1-5/8” dia. 1 5˚ x 45˚
720-10608         608             1-1/4” dia. 45˚
                                                                  Solid Pilots
Solid Pilots
                                                                  720-41012        100-5,0            5mm dia.
720-41023         100-4,0         4.0mm dia. x 95mm
                                                                  720-41031        100-5,02           5,02mm dia.
720-41014         100-4,5         4.5mm dia. x 114mm
                                                                  720-41002        100-6,0            6,0mm dia.
720-41012         100-5,0         5.0mm dia. x 114mm
                                                                  720-41040        100-6,02           6,02mm dia.
720-51009         100-5,5         5.5mm dia. x 114mm
                                                                  720-59501        140-5,0            5,0mm dia.
720-41010         100-5,52        5.52mm dia. x 114mm
                                                                  720-59503        140-5,02           5,02mm dia.
720-41002         100-6,0         6.0mm dia. x 114mm
                                                                  720-59505        140-6,0            6,0mm dia.
720-41011         100-6,6         6.0mm dia. x 133mm
                                                                  720-59516        140-6,02           6,02mm dia.
720-41012         140-5,0         5.0mm dia.
                                                                  720-59507        140-6,98           6,98mm dia.
720-41009         140-5,5         5.5mm dia.
                                                                  720-59508        140-7,0            7,0mm dia.
720-41011         140-6,6         6.6mm dia.
                                                                  720-59510        140-7,98           7,98mm dia.
721-82350 Kit for Ducati                                          720-59511        140-8,0            8,0mm dia.
Flanders No.        Neway No.     Description                     Accessories for the kits on this page.
Cutters                                                           720-91537         TW505            T-Wrench
720-10270           270           1-1/4” dia. 60˚                 720-90542         TW503-1          Adaptor, 1/2” to 3/8”
720-10602           602           1-1/4” dia. 31˚                 721-49700         CA497            Case
720-10608           608           1-1/4” dia. 45˚                 720-82246         KACC26           Accessories Kit
720-10205           205           1-1/2” dia. 60˚
720-10628           628           1-1/2” dia. 31˚
720-10620           620           1-1/2” dia. 45˚
Solid Pilots
720-59508           140-7,0       7,0mm dia.
720-59509           140-7,02      7,02mm dia.
720-59510           140-7,98      7,98mm dia.
720-59511           140-8,0       8,0mm dia.
720-59512           140-8,02      8,02mm dia.
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                           Fax: (626) 792-5341
                                                                                           www.FlandersCo.com
                                                                                                                               11
                                           Valve Seat Cutter Kits
     721-82451 Harley Davidson Kit                                           721-82470 V-Rod Upgrade Kit
     For use on all Harley-Davidson models, except V-Rod. For five-           Flanders No.   Neway No.     Description
     angle capability add cutters 624 and 697.                               Cutters
     Flanders No. Neway No.              Description                         720-10203      203           1-1/4” dia. 31˚ x 46˚
     Cutters                                                                 720-10271      271            1-1/2” dia. 70˚
     720-10622         622H              1-1/2” dia. (short hub) 31˚ x 46˚   Solid Pilots
     720-10205         205               1-1/2” dia 60˚                      720-59505      140-6,0       6,0mm dia.
     720-10293         293               1-3/4” dia. 60˚
     720-10642         642H              1-3/4” dia. (short hub) 31˚ x 46˚
     Solid Pilots
     720-55161         140-5/16 -3       5/16”dia.-3
     720-55162         140-5/16 -2       5/16”dia. -2
     720-55163         140-5/16-1        5/16”dia. -1
     720-55160         140-5/16 Std      5/16”dia. Std.
     720-55164         140-5/16 +1       5/16”dia. +1
     720-51319         140-11/32 -4 11/32”dia. -4
     720-51321         140-11/32 -3 11/32”dia.-3
     720-51322         140-11/32 -2 11/32”dia. -2
     720-51323         140-11/32 -1 11/32”dia.-1,
     720+51320         140-11/32 Std 11/32”dia. Std.
     720-51324         140-11/32 +1 11/32”dia. +1
     720-53803         140-3/8 -2        3/8”dia.-2
     720-53804         140-3/8 -1        3/8”dia. -1
     720-53800         140-3/8 -Std      3/8”dia. Std.
     720-53805         140-3/8 +1        3/8”dia. +1
     720-53806         140-3/8 +2        3/8”dia. +2
     720-53807         140-3/8 +3        3/8”dia. +3
     720-53808         140-3/8 +4        3/8”dia. +4
     720-59509         140-7.02           7,02mm dia.
     Accessories
     720-91537         TW505              T-Wrench
     720-90542         TW503-1           Adaptor, 1/2” to 3/8”
     721-49700         CA497             Case
     720-82246         KACC26            Accessories Kit




                                                                                                                                  REV. 06-02-08



12              (626) 792-7384
             www.FlandersCompany.com
                                                                                                  Fax: (626) 792-5341
                                                                                                  www.FlandersCo.com
                                      Valve Seat Cutter Kits
721-82487 Kit for Honda                                          721-82460 VTX Upgrade Kit
Flanders No.       Neway No. Description                         Cutters
Cutters                                                          720-10645        645            1-3/4” dia. 30˚ x 45˚
720-10144          144        Blades fixed at O.D. of .758” 32°   720-10205        205            1-1/2” dia. 60˚
720-10132          132        Blades fixed at O.D. of .830” 32°   Solid Pilots
720-10131          131        Blades fixed at O.D. of .850” 45°   720-59511        140-8,0        8,0mm dia.
720-10133          133        Blades fixed at O.D. of .874” 60˚   720-59512        140-8,02       8,02mm dia.
720-10143          143        Blades fixed at O.D. of .925” 45˚
720-10142          142        Blades fixed at O.D. of .925” 32˚   721-82538 Kit for Kawasaki
720-10122          122        1” dia. 45˚                        Flanders No.   Neway No. Description
720-10123          123        1” dia. 31˚                        Cutters
720-10111          111        1” dia. 60˚                        720-10131      131           Blades fixed at O.D. of .850” 45˚
720-10270          270        1-1/4” dia. 60˚                    720-10132      132           Blades fixed at O.D. of .830” 32˚
720-10607          607        1-1/4” dia. 30˚                    720-10133      133           Blades fixed at O.D. of .874” 60˚
720-10608          608        1-1/4” dia. 45˚                    720-10110      110           1” dia. 46˚
720-10626          626        1-1/2” dia. 30˚ x 45˚              720-10115      115           1” dia. 31˚
Solid Pilots                                                     720-10111      111           1” dia. 60˚
720-41021          100-3,8    3,8mm dia.                         720-10203      203           1-1/4” dia. 31˚ x 46˚
720-41022          100-3,82   3,82mm dia.                        720-10244      244           1-1/4” dia. 15˚
720-41023          100-4,0    4,0mm dia.                         720-10270      270           1-1/4” dia. 60˚
720-41024          100-4,02   4,02mm dia.                        720-10205      205           1-1/2” dia. 60˚
720-41014          100-4,5    4,5mm dia.                         720-10626      626           1-1/2” dia. 30˚ x 45˚
720-41013          100-4,52   4,52mm dia.                        Solid Pilots
720-41055          100-4,55   4,55mm dia.                        720-41023      100-4,0       4mm dia.
720-41012          100-5,0    5,0mm dia.                         720-41014      100-4,5       4,5mm dia.
720-41031          100-5,02   5,02mm dia.                        720-41012      100-5,0       5,0mm dia.
720-41009          100-5,5    5,5mm dia.                         720-41009      100-5,5       5,5mm dia.
720-41010          100-5,52   5,52mm dia.                        720-41010      100-5,52      5,52mm dia.
720-41011          100-6,6    6,6mm dia.                         720-59498      140-4,5       4,5mm dia.
720-59501          140-5,0    5,0mm dia.                         720-59508      140-7,0       7mm dia.
720-59502          140-5,5    5,5mm dia.                         720-59509      140-7,02      7,02mm dia.
720-59506          140-6,0    6,0mm dia.                         720-59516      140-7,5       7,5mm dia.
720-59615          140-6,02   6,02mm dia.                        720-59517      140-7,52      7,52mm dia.
720-59508          140-6,6    6,6mm dia.                         720-59111      140-8,0       8,0mm dia.
720-59507          140-6,98   6,98mm dia.                        720-59512      140-8,02      8,02mm dia.


Accessories for the kits on this page.
720-91537          TW505      T-Wrench                           721-49700      CA497        Case
720-90542          TW503-1    Adaptor, 1/2” to 3/8”              720-82246      KACC26       Accessories Kit
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                         Fax: (626) 792-5341
                                                                                         www.FlandersCo.com
                                                                                                                                 13
                                              Valve Seat Cutter Kits
     721-82508 Kit for Suzuki                                        721-82493 Kit for Yamaha
     Flanders No.   Neway No. Description                            Flanders No.   Neway No.     Description
     Cutters                                                         Cutters
     720-10130      130          Blades fixed at O.D. of .816” 1 5˚   720-10131      131           Blades fixed at O.D. of .850” 45˚
     720-10131      131          Blades fixed at O.D. of .850” 45˚    720-10138      138           Blades fixed at O.D. of .870” 20˚
     720-10122      122          1” dia. 45˚                         720-10133      133           Blades fixed at O.D. of .874” 60˚
     720-10111      111          1” dia. 60˚                         720-10122      122           1” dia. 45˚
     720-10121      121          1” dia. 15˚                         720-10123      123           1” dia. 31˚
     720-10126      126          1” dia. 30˚                         720-10127      127           1” dia. 20˚
     720-10615      615          1-3/8” dia. 1 5˚ x 45˚              720-10111      111           1” dia. 60˚
     720-10212      212          1-1/4” dia. 15˚ x 75˚               720-10203      203           1-1/4” dia. 31˚ x 46˚
     720-10608      608          1-1/4” dia. 45˚                     720-10205      205           1-1/2” dia. 60˚
     720-10216      216          1-1/2” dia. 75˚                     720-10642      642           1-3/4” dia. 31˚ x 46˚
     720-10635      635          1-5/8” dia. 1 5˚ x 45˚              Solid Pilots
     Solid Pilots                                                    720-41023      100-4,0       4,0mm dia.
     720-41023      100-4,0      4mm dia.                            720-41026      100-4,48      4,48mm dia.
     720-41014      100-4,5      4,5mm dia.                          720-41014      100-4,5       4,5mm dia.
     720-41012      100-5,0      5,0mm dia.                          720-41012      100-5,0       5,0mm dia.
     720-41009      100-5,5      5,5mm dia.                          720-41009      100-5,5       5,5mm dia.
     720-41010      100-5,52     5,52mm dia.                         720-41002      100-6,0       6,0mm dia.
     720-41004      100-7,0      7mm dia.                            720-41004      100-7,0       7,0mm dia.
     720-59501      140-5,0      5mm dia.                            720-59508      140-7,0       7,0mm dia.
     720-59502      140-5,5      5,5mm dia.                          720-59509      140-7,02      7,02mm dia.
     720-59507      140-6,98     6,98mm dia.                         720-59511      140-8,0       8,0mm dia.
     720-59508      140-7,0      7,0mm dia.                          720-59512      140-8,02      8,02mm dia.

     Accessories for the kits on this page.
     720-91537      TW505        T-Wrench                            721-49700      CA497       Case
     720-90542      TW503-1      Adaptor, 1/2” to 3/8”               720-82246      KACC26      Accessories Kit




                                                                                                                              REV. 06-02-08



14             (626) 792-7384
            www.FlandersCompany.com
                                                                                          Fax: (626) 792-5341
                                                                                          www.FlandersCo.com
                                    Valve Seat Cutters & Pilots
                      NEWAY VALVE SEAT CUTTERS & PILOTS
                      100 SERIES CUTTERS                                            100 SERIES SOLID PILOTS
Flanders          Neway   Head      Head         No. of   Blade                      FOR 100 SERIES CUTTERS
Number            No.     Dia.      Angles       Blades   Part No.     Flanders    Pilot       Overall   Metric   Inch     Inch
720-10126         126     1.0”      30°          3        720-63250    Number      No.         Length    Dia.     Dia.     Fraction
720-10127         127     .975”     20°          3        720-63253    720-41021   100-3.8     89mm      3.8      .1496”
720-10138         138     .870”     20°          3        fixed         720-41022   100-3.82    89mm      3.82     .1504”
720-10130         130     .816”     15°          3        fixed         720-41023   100-4.0     95mm      4        .1575”
720-10131         131     .850”     45°          3        fixed         720-41024   100-4.02    95mm      4.02     .1583”
720-10132         132     .830”     32°          3        fixed         720-41025   100-4.05    95mm      4.05     .1594”
720-10133         133     .874”     60°          3        fixed         720-41012   100-5.0     114mm     5        .1969”
720-10142         142     .925”     32°          3        fixed         720-41026   100-4.48    89mm      4.48     .1764”
720-10143         143     .925”     45°          3        fixed         720-41014   100-4.5     89mm      4.5      .1772”
720-10144         144     .758”     32°          3        fixed         720-41013   100-4.52    114mm     4.52     .1780”
720-10115         115     .975”     31°          3        720-63250    720-41055   100-4.55    89mm      4.55     .1790”
720-10123         123     .975”     31°          3        720-63253    720-41028   100-4.8     89mm      4.8      .1890”
720-10122         122     .975”     45°          3        720-63253    720-41029   100-4.98    89mm      4.98     .1961”
720-10110         110     .975”     46°          3        720-63253    720-41031   100-5.02    114mm     5.02     .1976”
720-10121         121     1.0”      15°          3        720-63253    720-41009   100-5.5     114mm     5.5      .2165”
720-10120         120     1.0”      15°          3        720-63553    720-41033   100-5.5     76mm      5.5      .2165”
720-10111         111     1.0”      60°          3        720-63252    720-41010   100-5.52    114mm     5.52     .2173”
720-10125         125     1.0”      75°          3        720-63254    720-41035   100-5.52    76mm      5.52     .2173”
720-10114         114     1-1/4”    60°          3        720-63252    720-41037   100-5.55    76mm      5.55     .2185”
720-10128         128     1-1/4”    30° x 45°    3x3      720-63250    720-41038   100-5.98    114mm     5.98     .2354”
720-10102         102     1-5/16”   31° x 46°    3x3      720-63251    720-41002   100-6.0     114mm     6        .2362”
720-10124         124     1-5/16”   15° x 60°    3x3      720-63251    720-41040   100-6.02    114mm     6.02     .2370”
720-10103         103     1-1/8”    31° x 46°    3x3      720-63253    720-41041   100-6.05    114mm     6.05     .2382”
                                                                       720-41001   100-1/4     114mm     6.35     .250”    1/4”
120 SERIES EXPANDABLE PILOTS FOR 100 SERIES CUTTERS
                                                                       720-41042   100-6.5     114mm     6.5      .2559”
Flanders           Pilot      Overall   Metric   Inch       Inch
Number             No.        Length    Dia.     Dia.       Fraction   720-41043   100-6.58    114mm     6.58     .2591”
720-37021          120-5.5    4.0”      5.50     .2165”                720-41011   100-6.6     133mm     6.6      .2598”
720-37022          120-6.0    4.0”      6.00     .2362”                720-41045   100-6.62    114mm     6.62     .2606”
720-37001          120-1/4    4.0”      6.35     .250”      1/4”       720-41004   100-7.0     114mm     7        .2756”
720-37023          120-6.5    4.0”      6.50     .2559”                720-41047   100-7.02    114mm     7.02     .2764”
720-37024          120-7.0    6.0”      7.00     .2756”                720-41048   100-7.05    114mm     7.05     .2776”
720-37002          120-9/32   6.0”      7.14     .2812”     9/32”      720-41003   100-9/32    114mm     7.14     .2812”   9/32”
720-37025          120-7.5    6.0”      7.50     .2953”                720-41005   100-5/16    114mm     7.94     .3125”   5/16”
720-37027          120-5/16   6.250”    7.94     .3125”     5/16”      720-41007   100-8.0     114mm     8        .315”
720-37026          120-8.0    6.250”    8.00     .3150”                720-41006   100-11/32   114mm     8.73     .3437”   11/32”

REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                           Fax: (626) 792-5341
                                                                                           www.FlandersCo.com
                                                                                                                                      15
                                         Valve Seat Cutters & Pilots
                        200 & 600 Series Cutters                                    150 Series EXPANDABLE PILOTS
     Flanders     Cutter Head      Head        No. of Blade                          for 200 & 600 Series Cutters
     Number       No. Dia.         Angles      Blades Part No.          Flanders     Pilot         Overall   MM     Inch      Fraction
     720-10244    244     1-1/4”   15°         3      720-63250         Number       No.           Length    Dia.   Dia.      Dia.
     720-10204    204     1-1/4”   15° x 46°   3x3    720-63250         720-37029    150-6.5       6”        6.5    .2559”
     720-10273    273     1-1/4”   15° x 60°   3 x3   720-63250/63252   720-37030    150-7.0       6”        7      .2756”
     720-10212    212     1-1/4”   15° x 75°   3 x3   720-63250/63254
                                                                        720-37006    150-9/32      6”        7.14   .2812”    9/32”
     720-10607    607     1-1/4”   30°         5      720-63250
                                                                        720-37031    150-7.5       6”        7.5    .2953”
     720-10602    602     1-1/4”   31°         5      720-63250
                                                                        720-37007    150-5/16      6-1/2”    7.94   .3125”    5/16”
     720-10203    203     1-1/4”   31° x 45°   3x3    720-63250
                                                                        720-37032    150-8.0       6-1/2”    8      .3150”
     720-10608    608     1-1/4”   45°         5      720-63250
     720-10270    270     1-1/4”   60°         3      720-63252         720-37033    150-8.5       6-1/2”    8.5    .3346”
     720-10222    222     1-1/4”   70°         3      720-63252         720-37008    150-11/32     6-1/2”    8.73   .3437”    11/32”
     720-10210    210     1-1/4”   75°         3      720-63252         720-37009    150-3/8       7”        9.53   .3750”    3/8”
     720-10201    201     1-3/8”   31° x 46°   3x3    720-63250/63251      140 Series Pilots for 200 & 600 Series Cutters
     720-10611    611     1-3/8”   31°         5      720-63250
                                                                        Flanders    Pilot          Overall   MM     Inch     Fraction
     720-10612    612     1-3/8”   15° x 46°   3x5    720-63250         Number      No.            Length    Dia.   Dia.     Dia.
     720-10615    615     1-3/8”   15° x 45°   3x3    720-63250         720-59501   140-5.0        152mm     5      .1969”
     720-10616    616     1-3/8”   30° x 45°   5x5    720-63251         720-59503   140-5.02       152mm     5.02   .1976”
     720-10618    618     1-1/2”   35° x 60°   5x5    720-63250/63252
                                                                        720-59502   140-5.5        152mm     5.5    .2165”
     720-10239    239     1-1/2”   11° x 45°   3x3    720-63251
                                                                        720-59504   140-5.52       152mm     5.52   .2173”
     720-10623    623     1-1/2”   15° x 30°   3x5    720-63250
                                                                        720-59505   140-6.0        152mm     6      .2362”
     720-10625    625     1-1/2”   15° x 45°   3x5    720-63251
                                                                        720-59615   140-6.02       152mm     6.02   .2370”
     720-10621    621     1-1/2”   15° x 46°   3x5    720-63251
     720-10213    213     1-1/2”   15° x 50°   3x3    720-63251/63254   720-59506   140-6.6        152mm     6.6    .2598”
     720-10234    234     1-1/2”   39° x 45°   3x3    720-63251         720-59507   140-6.98       152mm     6.98   .2748”
     720-10626    626     1-1/2»   30° x 45°   5x5    720-63251         720-59508   140-7.0        152mm     7      .2756”
     720-10208    208     1-1/2»   31° x 46°   3x3    720-63251         720-59509   140-7.02       152mm     7.02   .2764”
     720-10622    622H    1-1/2”   31° x 46°   5x5    720-63251         720-59321   140-9/32-1     5-1/4”    7.12   .2802”   9/32-.001”
     720-10205    205     1-1/2”   60°         3      720-63254         720-59320   140-9/32       5-1/4”    7.14   .2812”   9/32” Std.
     720-10271    271     1-1/2”   70°         3      720-63254
                                                                        720-59322   140-9/32+1     5-1/4”    7.17   .2822”   9/32+.001”
     720-10216    216     1-1/2”   75°         3      720-63254
                                                                        720-59323   140-9/32+2     5-1/4”    7.19   .2832”   9/32+.002”
     720-10635    635     1-5/8”   15° x 45°   5x5    720-63251
                                                                        720-59515   140-7.48       152mm     7.48   .2945”
     720-10631    631     1-5/8”   15° x 45°   3x5    720-63251
                                                                        720-59614   140-19/64-2    6”        7.49   .2949”   19/64-.002”
     720-10237    237     1-5/8”   30° x 45°   3x3    720-63251
     720-10641    641     1-3/4”   15° x 46°   3x5    720-63251         720-59516   140-7.50       152mm     7.5    .2953”
     720-10642    642H    1-3/4”   31° x 45°   5x5    720-63251         720-59613   140-19/64-1    6”        7.51   .2959”   19/64-.001”
     720-10643    643     1-3/4”   15° x 60°   5x5    720-63251/63254   720-59517   140-7.52       152mm     7.52   .2961”
     720-10645    645     1-3/4”   20° x 45°   5x5    720-63251         720-59610   140-19/64      6”        7.54   .2969”   19/64” Std.
     720-10293    293     1-3/4”   60°         3      720-63254         720-59611   140-19/64+ 1   6”        7.56   .2979”   19/64+.001”
     720-10647    647     2”       30°         2      720-63250         720-59612   140-19/64+2    6”        7.59   .2989”   19/64+.002”
     720-10652    652     2”       31° x 46°   5x5    720-63251         720-55159   140-5/16-4     152mm     7.84   .3085”   5/16-.004”
     720-10657    657     2”       60°         5      720-63254
                                                                        720-55161   140-5/16-3     6”        7.86   .3095”   5/16-.003”
                                                                                                                                  REV. 06-02-08



16                 (626) 792-7384
                www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                           Valve Seat Cutters
    140 Series Pilots for 200 & 600 Series Cutters . . . Continued
Flanders     Pilot            Overall MM Inch           Fraction
Number       No.              Length Dia. Dia.          Dia.
720-55163 140-5/16-1 6”                7.91 .3115” 5/16-.001”
720-55160 140-5/16            6”       7.94 .3125” 5/16” Std.
720-55164 140-5/16+1 6”                7.96 .3135” 5/16+.001”
720-59510 140-7.98            6”       7.98 .3142”
720-55165 140-5/16+2 6”                7.99 .3145” 5/16+.002”
720-59511 140-3.0             152mm 8         .3150”
720-59512 140-3.02            152mm 8.02 .3157”
720-51319 140-11/32-4 6-1/2” 8.62 .339” 11/32-.004”
720-51321 140-11/32-3 6-1/2” 8.65 .3407” 11/32-.003”
720-51322 130-11/32-2 6-1/2” 8.68 .3417” 11/32-.002”
720-51323 140-11/32-1 6-1/2” 8.7 .3427” 11/32-.001”
720-51320 140-11/32 6-1/2” 8.73 .3437” 11/32” Std.
720-51324 140-11/32+1 6-1/2” 8.76 .3447” 11/32+.001”
720-51325 140-11/32+2 6-1/2” 8.8 .3457” 11/32+.002”
720-51326 140-11/32+3 6-1/2” 8.81 .3468” 11/32+.003”
720-51327 140-11/32+4 6-1/2” 8.83 .3478” 11/32+.004”
720-51328 140-11/32+5 6-1/2” 8.86 .3488” 11/32+.005”
720-59524 140-9.0             165mm 9         .3543”
720-59525 140-9.02            165mm 9.02 .3551”
720-53801 140-3/8-4 7”                 9.4 .3700” 3/8-.004”
720-53802 140-3/8-3 7”                 9.45 .3720” 3/8-.003”
720-53803 140-3/8-2 7”                 9.47 .3730” 3/8-.002”
720-53804 140-3/8-1 7”                 9.5 .3740” 3/8-.001”
720-53800 140-3/8             7”       9.53 .3750” 3/8” Std.
720-53805 140-3/8+1 7”                 9.55 .3760” 3/8+.001”
720-53806 140-3/8+2 7”                 9.58 .3770” 3/8+.002”
720-53807 140-3/8+3 7”                 9.6 .3780” 3/8+.003”
720-53808 140-3/8+4 7”                 9.63 .379” 3/8+.004”
720-53809 140-3/8+5 7”                 9.65 .3800” 3/8+.005”
720-53810 140-3/8+6 7”                 9.68 .3810” 3/8+.006”
720-53811 140-3/8+7 7”                 9.7 .382” 3/8+.007”




REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                     Fax: (626) 792-5341
                                                                     www.FlandersCo.com
                                                                                           17
                                            Valve Seat Cutters
                                Neway Parts and Accessories
       Nylon T-Wrench                                                         720-90245 Pilot Puller Pin

                                                                                                           720-90267 Brush
                                         720-90260 Flat Head Screw

                                                720-90265 Lg. Wedge Blade Lock
                                                720-90266 Sm. Wedge Blade Lock
      720-90513 3/8”
      720-90505 1/2”
                                                                                      720-95001
                                Set Screw                                             Instruction Manual
                                720-90262                                                                         721-90709
          T-Wrench                                                                                                1/2 pint Valve seat
                                                                                                                  cutting fluid




                                 720-90542
                                 Adaptor 1/2 male to 3/8                       721-49700
     720-91008 3-Piece           female to use 720-91537                       Large plastic case           721-30300
     720-91537 2-Piece           on 100 series cutters                         for larger kits              Small plastic case

     Flanders Number             Description                                          Application
     720-90245                   Pilot Puller Pin                                     For All Pilots
     720-82246                   Parts Kit                                            Contains: Brush, Puller Pin, 5/64” Hex Key
     720-90260                   Flat Head Allen Screw 5-40                           Blade Lock Screw
     720-90262                   Set Screw Allen 10-32                                Hub Lock Screw
     720-90265                   Wedge for Blade Lock Screw                           200 & 600 Cutters
     720-90266                   Wedge for Blade Lock Screw                           100 Cutters
     720-90267                   Brush, Stiff Bristle                                 Clean Cutter Heads
     720-90542                   Socket Adaptor Only 3/8” Hex                         For 100 Cutters
     720-91008                   T-Wrench (3 Piece) w/Adaptor for 3/8” & 1/2” Drive   100, 200 & 600 Cutters
     720-91537                   T-Wrench (2 Piece) 1/2” Drive                        200 & 600 Cutters
     720-90513                   3/8” Nylon T-Wrench                                  100 Cutters
     720-90505                   1/2” Nylon T-Wrench                                  200 & 600 Cutters

                                 Carbide Blades For Neway Cutter Heads


     Seat Blade                       Narrowing Blade                   Blending Blade                     Special Blade
     720-63250   3/8” length          720-63252      1/2” length        720-63259      3/4” length         720-63553      5/16” length
     720-63251   1/2” length          720-63254      3/4” length        720-63352      1/2” length
     720-63253   5/16” length

                                                                                                                                   REV. 06-02-08



18            (626) 792-7384
           www.FlandersCompany.com
                                                                                              Fax: (626) 792-5341
                                                                                              www.FlandersCo.com
                                               Hones - Brushes
Brush Research - FLEX HONE
FLEX HONES
180 GRIT              240 GRIT
PART NO.              PART NO.        SIZE
526-01500             526-11500       1-1/2”   38MM
526-01625             526-11625       1-5/8”   41MM
526-01700             526-11700       1-3/4”   45MM
526-01875             526-11875       1-1/8”   48MM
526-02000             526-12000       2”       51MM
526-02125             526-12125       2-1/8”   54MM
526-02250             526-12550       2-1/4”   57MM
526-02500             526-12500       2-1/2”   64MM
526-02625             526-12625       2-5/8”   66.4MM
526-02750             526-12750       2-3/4”   70MM
526-03000             526-13000       3”       76MM
526-03250             526-13250       3-1/4”   83MM
526-03500             526-13500       3-1/2”   89MM
526-03750             526-13750       3-3/4”   95MM
526-04125                             4-1/8”   105MM
526-04625                             4-5/8”   118MM

VALVE GUIDE BRUSHES
PART NO.                      SIZE
526-00197                     .197”   5.0MM
526-00217                     .217”   5.5MM
526-00250                     .250”   6.4MM
526-00276                     .276”   7.0MM
526-00315                     .315”   8.0MM
526-00375                     .375”   9.5MM
526-00625                     5/16”


ROTOR BRUSHES                                              DISC BRUSH TOOL
PART NO.                      GRIT                         PART NO.         GRIT
526-50060                      60                          526-72046        46 GRIT
526-50120                     120                          526-72060        60 GRIT
526-50240                     240                          526-72080        80 GRIT



                       715-02601 Steel wire wheel brush.   Flex hone oil specially developed
                       13/16” wide, 6” dia.                for use with Brush Research flex
                       For 1/2” or 5/8” arbor.             hones.
                       Wire size .014.                     526-01008         1/2 pint can
                       Maximum 6,000 RPM                   526-01032         1 Quart Can



 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                 Fax: (626) 792-5341
                                                                                 www.FlandersCo.com
                                                                                                       19
                                                                 Brushes
     PARTS WASH BRUSHES
     PART NO.           Description
     526-60101    PW-A Straight Handle Flow Thru Design
     526-60202    PW-C Straight Handle                                                                   526-60404
     526-60303    PW-6P Ergonomic Handle Flow Thru Design
     526-60404    PW-7P Ergonomic Handle
     526-60505    PW-1P Ergo Hndl Paint Brush Style Flow Thru w/Valve
     526-60606    PW-4P Ergo Hndl Flow Thru w/Valve
     526-00034    PW-3/4 3/4” Dia. Polypropolene brush with
                         aluminum handle and scraper end
                                                                              526-60303


                    526-00034

                                                                              526-60606

                    526-60202



                    526-60101
                                                                              526-60505

       526-00010
       Acid Brushes
       Package of 6 each
                                                                        526-00001   Oil line brush with tynex nylon bristles.
                                                                                    1/4” dia. 2” length. 10” overall length.
                                                                        526-00002   Oil line brush with tynex nylon bristles.
                                                                                    5/16” dia. 2 1/2” length. 12” overall length.
                                                                        526-00003   Oil line brush with tynex nylon bristles.
     526-00093           Stainless steel wire toothbrush                            3/8” dia. 2 1/2” length. 12” overall length.



     526-00200           Steel wire chip brush 1-1/4” x 5-1/2”          715-05601   14” overall length steel wire brush
     526-00004
     Rotary End Brush
     • 1/2” dia. for use with
       1/4” drill motor                                                 526-00039   3” dia. x 9” long spoke brush
                                                                                                                             REV. 06-02-08



20               (626) 792-7384
              www.FlandersCompany.com
                                                                                       Fax: (626) 792-5341
                                                                                       www.FlandersCo.com
                                                           Hones
                   AMMCO Precision Sizing Cylinder Hones
       Large Hone Set
       527-00500
       Range 2-1/2” (64 mm) to 4-1/8” (104 mm), with extension available to increase
       range to 5-3/4” (145 mm)
       Replacement Parts And Accessories
       527-00619*       Roughing stones & felts (60 grit)
       527-00620*       Medium stones & felts (220 grit)
       527-00621        Fine stone grits & felts (400 grit)
       527-00388*       Stone carriers 2-1/2” to 3-5/16”
       527-00389*       Stone carriers 3-5/16” to 4-1/8”
       527-00391        Stone carriers 4-15/16” to 5-3/4”
       527-00037*       Stone retainer springs (Pack of 6)
       527-03567        Drive shank
       527-03933        Medium fine stones & felts (320 grit)
       527-00577        Clamp for holding stones
       527-02322        Screw for clamp #577
       *furnished with 527-00500 hone set




       Medium Hone Set
       527-03950
       1-7/8” (48mm) to 2-3/4” (69mm) with extension stones available to increase
       range to 3-5/8” (92mm)
       Replacement Parts And Accessories
       527-03951*       Roughing stones & felts (60 grit) 1-7/8” to 2-3/4”
       527-03952*       Finishing stones & felts (200 grit) 1-7/8” to 2-3/4”
       527-03953        Roughing stones & felts (60 grit) 2-3/4” to 3-5/8”
       527-03954        Finishing stones & felts (200 grit) 2-3/4” to 3-5/8”
       527-03955        Stones & felts (320 grit for aluminum) 1-7/8” to 2/3/4”
       527-03956        Stones & felts (320 grit for aluminum) 2-3/4” to 3-3/8”
       527-01880*       Drive Shank
       527-08554        Stop for Drive shank
       527-03957        12 Stone Retainer Springs
       *furnished with 527-03950 hone set




       Small Engine Hone Set
       527-08550
       Range 1-3/8” (35mm) to 2” (50mm) with extension stones available to in-
       crease range to 2-5/8” (66mm)
       Replacement Parts And Accessories
       527-08588*       Roughing stones & felts (60 grit) 1-3/8” to 2”
       527-08560*       Finishing stones & felts (220 grit) 1-3/8” to 2”
       527-08589        Roughing stones & felts (60 grit) 2” to 2-5/8”
       527-08590        Finishing stones & felts (220 grit) 2” to 2-5/8”
       527-08554*       Stop for Drive Shank
       527-08556*       Drive shank
       *furnished with 527-08550 hone set
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                       Fax: (626) 792-5341
                                                                                       www.FlandersCo.com
                                                                                                             21
                                                       Hones
                                   AMMCO Cylinder Hones
                                                Not recommended for two stroke engines
                                                       (Will hang-up on the ports)




     Deglazing Type Cylinder Hones


     527-03800
     Range 2” to 5”
     Oversizing impossible-breaks glaze-removes tool marks - cylinder contour not altered
     Flexible drive-hone hard-to-get-at cylinders in car
     Fast-20 seconds per cylinder
     Easy to use-no adjustment to make, constant correct honing pressure
     Operated by 1/4”, 3/8” or 1/2” electric drill


     Replacement Parts
     527-03810          Stone Set (280 grit) (standard equipment)
     527-03833          Stone Set (400 grit)
     527-03838          Flexible Drive
     527-01879          Drive Pins
     527-01880          Drive Shank




     527-08275
     Range 1-1/2” to 3-1/2”
     Oversizing impossible-breaks glaze-removes tool marks.
     Flexible drive -driven with a 3/8” or heavy duty 1/4” electric drill


     Replacement Parts
     527-08288          Stone Set (220 grit)
     527-00037          Retainer Springs - 6 Stone
     527-03957          Retainer Springs - 12 Stone
     527-00388          Stone Carriers - Small
     527-00389          Stone Carriers - Medium
     527-00391          Stone Carriers - Extra large




                                                                                                       REV. 06-02-08



22      (626) 792-7384
     www.FlandersCompany.com
                                                                                 Fax: (626) 792-5341
                                                                                 www.FlandersCo.com
                                                         Hones
                                         Sunnen - Cylinder Hones
                  The fastest and most accurate (to one-half thousandth) portable hone for cylinder reconditioning.
                  The only method that maintains alignment of the original bore.
                  Reconditions cylinder bore with less stock removal than other methods.
                  Maintains uniform wall thickness.
                  Assures longer block life.
                  Produces ANF finish specified by engine and ring manufacturers.
                  Recommended for fast seating of chrome or moly rings.
                  Correct stone length.
                  Fast stock removal-up to five thousandths (0.13mm) per minute.
                  Can be set up in a few minutes-no studs to remove.
                  All cylinder hones include metal storage box.


AN-111 STANDARD
PORTABLE CYLINDER
HONE
568-30111
Shipped with roughing and medium finishing stone sets, (AN-
100, AN-300) for range 2.7” to 4.1” (69-104 mm)
Includes 12” drive shank.
Shipping Weight: Approx. 9lbs.




JN-95 JUNIOR PORTABLE                                                                        568-30111

CYLINDER HONE
568-20095
Range: 2.0”-2.6” (51-66mm)
Ideal for outboard motors, motorcycles and similar small bore
engines within its range. Includes 2” drive shank and 12”
extension.
Note: All stone sets must be ordered separately. See chart.
Stone Set Range:
2.0” to 2.2”
2.2” to 2.4”
2.4” to 2.6”
Shipping Weight: Approx. 5 lbs.
                                                                      568-20095


SN-75 MIDGET PORTABLE
CYLINDER HONE
568-10075
Range: 1.75”-2.0” (44-51mm)
Recommended for small compressors, outboards motors and
similar small bore engines. Includes 2” drive shank and 12”
extension.
Note: All stone sets must be ordered separately. See chart.
Shipping Weight: Approx. 5lbs.
                                                                                           568-10075
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                     Fax: (626) 792-5341
                                                                                     www.FlandersCo.com
                                                                                                                      23
                                                         Hones
                                Sunnen - Honing Stones & Oil
                                                           SUNNEN
                                   STONE SETS FOR SUNNEN CYLINDER HONES
          FOR USE IN         DIAMETER      ROUGHING     FINISHING       MED.            POLISHING        FINE
        CYLINDER HONE          RANGE       STONE SET   STONE SET    FINISHING           STONE SET       FINISH
            MODELS                          (70 GRIT)   (150 GRIT)  STONE SET           (280 GRIT)   STONE SET
                                                                    (220 GRIT)                       (400 GRIT)
     568-10075 SN MIDGET     1.75" TO 2.0"   568-10100   568-10200                       568-10500     568-11887
               SN-75        (44 TO 51 MM)
                              2.0" TO 2.2"   568-20100   568-20200    568-20300          568-20500    568-22087
                            (51 TO 56 MM)
     568-20095 JN JUNIOR      2.2" TO 2.4"   568-20101   568-20201    568-20301          568-20501    568-22287
               JN-95        (56 TO 61 MM)
                              2.4" TO 2.6"   568-20102   568-20202    568-20302          568-20502    568-22487
                            (61 TO 66 MM)
     568-30111 STANDARD AN    2.5" TO 4.1"   568-30115   568-30215                       568-30515    568-32587
               AN-111       (63 TO 70 MM)
                              2.7" TO 4.1"   568-30100   568-30200    568-30300          568-30500    568-32787
                           (69 TO 104 MM)




                 Honing Aluminum Cylinders
                 Sunnen Cylinder Hones are ideal for reconditioning aluminum cylin-
                 ders. When honing aluminum, Sunnen Honing Oil must be used.
                 The general recommendation is as follows:
                 *For Roughing use the 150 grit stone set, the same type as for
                 cast iron cylinders.
                 *For Finishing use the 280 grit stone set, the same type as for cast
                 iron cylinders.




                  Sunnen Honing Oil
                  Finest quality honing oil. Not just a coolant, but
                  carefully compounded oil developed especially for
                  honing. Keeps honing stones clean and free cutting,
                  reduces honing time, gives longer life to stones and
                  mandrels, prodeces a controlled surface finish. Do
                  not use sustitutes such as kerosene, water-soluble
                  oils and other imitations.
                  568-40720          1 quart
                  568-40831          1 gallon.
                  568-40845          5 gallons.




                                                                                                            REV. 06-02-08



24           (626) 792-7384
          www.FlandersCompany.com
                                                                                Fax: (626) 792-5341
                                                                                www.FlandersCo.com
                                                      Carburetor
Sync Pro Carb Tuner                                                   Sync Pro Replacement Parts
121-08411                                                             121-08415 Manometer fluid refill
• Precise four channel vacuum indicator designed specifically for       • Non-toxic
  intake synchronization of engines with multiple carburetors or       • Mercury free
  throttle bodies (max vacuum range 40cm Hg)                           • Motion Pro blue color
• New mercury-free design uses non toxic manometer fluid
• For use with any 2, 3 or 4 cylinder four stroke motorcycles         121-08014 Replacement Hose Set
• Spill proof design means the tool can be stored in a
  horizontal or vertical position                                     121-08168 6mm Short Brass Adapters
• Easy to read scale for precise synchronization                       • Set of 4
• Unaffected by barometric pressure changes
• Includes hang hook to clip onto the handlebars for easy use         121-08013 5mm Brass Adapters - Honda/Suzuki
• Rugged, impact resistant ABS enclosure with convenient storage       • Set of 4
  area for adapters
• Rubber feet on enclosure bottom helps prevent sliding               121-08040 6mm Brass Adapters - Yamaha
• Includes manometer fluid, hoses, 5mm adapters, in-line restrictors    • 2 Short, 2 Long
  and instructions
• 5mm adapters are used on many Honda and Suzuki models               121-08216 Vacuum Adapter: Santoprene 5mm
• Optional 6mm adapters available for use on most Yamaha models
• Most Kawasaki models do not need adapters                           121-08217 Vacuum Adapter: Santoprene 6mm
• Patent Pending
                                                                      121-08218 Vacuum Adapter: Brass w/Cap 5mm

                                                                      121-08219 Vacuum Adapter: Brass w/Cap 6mm

                                                                      121-08426 Restrictor Jet 0.006”
                                                                       • Set of 4



                                                                      Float Bowl Wrench
                                                                      121-08366
                                                                      •   Designed to remove 17mm float bowl drain plugs
                                                                      •   Made from lightweight 6061 T-6™ aluminum
                                                                      •   Compact design to carry in your tool pack
                                                                      •   12 point hex and low profile design for tight access




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                Fax: (626) 792-5341
                                                                                                www.FlandersCo.com
                                                                                                                                25
                                                                 Carburetor
     FCR Carb Tool                                                          Main Jet Wrenches
     121-08181                                                              • High-quality die cast construction
                                                                            • 6mm round and hex jets and 8mm round
     • Contains longer bits for reaching into recessed cavities to adjust   • Cap holds a few spare main jets
       Keihin FCR carburetors                                               • Sold each
     • Ideal for trail riders and garage mechanics alike
     • Includes 6mm hex for main jets, long-reach straight slot for pilot
       jets & a 3mm Allen for float bowl removal
                                                                            121-08023 6mm Hex
                                                                            121-08024 8mm Round
                                                                            121-08025 6mm Round




                                                                            Carb Adjusting Tool
                                                                            121-08022
                                                                            • Made from alloy steel
                                                                            • Works with Mikuni or Keihin carburetors featuring an 8mm hex
     Mini-T Carb Tool                                                         nut and screwdriver-slot adjusting bolt
                                                                            • 11 inches long
     121-08136
     • Designed for on-the-trail jet changes
     • Perfect for Motion Pro T6 Tool Pack
     • Includes no. 2 Phillips bit, no.1 Straight-slot bit and
       6mm hex socket
     • Can store up to 3 main jets in handle
     • Specifically designed with 4-strokes in mind,
       but will also work on many 2-stroke models                           Pilot Screw Adjusting Tool
                                                                            121-08119
                                                                            • Designed for those hard-to-reach air/fuel mixture screws on most
                                                                              multi-cylinder motorcycles
                                                                            • Straight-slot blade tip can be rotated by rotating the handle
                                                                            • Length is 17 inches with a 110 degree angled head to extend
                                                                              reach 1 inch.
                                                                            • Tip height is adjustable, and can be set in place during use




                                                                                                                                       REV. 06-02-08



26               (626) 792-7384
              www.FlandersCompany.com
                                                                                                  Fax: (626) 792-5341
                                                                                                  www.FlandersCo.com
                                                         Carburetor
Deluxe Auxiliary Fuel Tank Auxiliary Fuel Tank
For Fuel-Injected Machines 121-08032
121-08189                  • For use when tuning a motorcycle with the gas tank removed
                                                                          • Includes 4 ft. of 1/4 inch fuel line and an 1/4 inch in-line fuel barb
• For use with fuel injected models with external fuel pumps as well      • Tank can also be used for refilling transmission oil on some late
  as standard carburetor equipped motorcycles                               model MX bikes
• Upgraded petcock for easier opening and closing                         • Holds up to 2000cc or 1/2 gallon of fluid
• Built-in fuel return line and breather on cap for use on fuel
  injected motorcycles
• Graduated scale on side of bottle provides accurate measurement
  of fluid volume
• Includes 4 ft. of 1/4 in. fuel line
• Tank can also be used for refilling transmission oil on some late
  model MX bikes
• Holds up to 2000cc or 1/2- gallon of fluid
• Not designed for fuel storage




                                                                          O-Clip Pincher Tool
                                                                          121-12024
                                                                          • Used to install and remove O-clips
                                                                          • PVC coated grip



Plastic Shears
121-12013
• Scissor-action cutter
• Fast cutting of thin wall and small diameter PVC or Tygon type tubing
• Replaceable, Teflon-coated tool steel blades                             Steel O-Clips
• Blades can be re-sharpened                                              • Sold in packs of 10

                                                                          121-12025          5/16” (for 3/16” hose)
                                                                          121-12026          7/16” (for 1/4” hose)
                                                                          121-12027          1/2” (for 5/16” hose)
                                                                          121-12028          9/16” (for 3/8” hose)




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                     Fax: (626) 792-5341
                                                                                                     www.FlandersCo.com
                                                                                                                                                     27
                                                                   Ignition
     Degree Wheel                                                      Timing Plug Wrench
     121-08092                                                         121- 08087
     • Manufactured from .052” thick aluminum with a 6.75” outside     • Fits all the Japanese motorcycles & ATV’s with the straight-slot
       diameter and a 6mm center hole                                    timing plugs
     • Black anodized finish                                            • Blade sizes are 16mm (5/8”), 22mm (7/8”), and 38mm (1 1/2”).
     • Easy to read
     •Check or set ignition timing
     • May also be used on 4-stroke engines to check or alter cam
       timing




                                                                       GL1200 Timing Cover Tool
                                                                       121-08057
                                                                       • Designed to reach the bolts holding the timing covers
                                                                         on the front of Goldwing engines.
     Ducati Timing Tool                                                • One end is used to break loose and tighten, the other end is used
                                                                         for spinning off after loosening.
     325-01044                                                         • GL1200 84-87
     • Crank turning tool. 1990 & later 750, 900, & 916’s




                                                                       2-Stroke Timing Kit For
                                                                       Water-Cooled Engines
                                                                       121-08250
                                                                       • Kit includes a dial indicator with extensions and a 14mm spark
                                                                         plug thread adapter
                                                                       • Allows inspection and adjustment of ignition timing
                                                                       • Designed to clear frame tubes on most recent water cooled
     Ignition System Tester                                              models
                                                                       • Gauge face size 1 1/2 in.
     121-08122
     • Test the integrity and strength of your ignition system.
     • Spark gap is adjustable from 0 to 10mm.
     • The larger the gap your ignition will jump, the stronger your
       system is.
     • Will test the spark on most motorcycles, watercraft, ATVs &
       snowmobiles.                                                    Air-Cooled Eng.
                                                                       Adapter Kit 121-08249
                                                                                                                                    REV. 06-02-08



28               (626) 792-7384
              www.FlandersCompany.com
                                                                                              Fax: (626) 792-5341
                                                                                              www.FlandersCo.com
                                        Spark Plug Wrenches
Spark Plug Socket                                                      Ratchet Spark Plug
121-08239                                                              Kit 121-08318
                                                                       Includes Wrench & Socket below.
For use with 5/8” spark plugs
• Special thin wall design fits in tight spaces                         Wrench 121-08147
• Perfect for use on water-cooled 4-strokes with 5/8” spark plugs
• Unique 2-step extension - Swivel or fixed                             Socket 121-08291
• 3/8” drive swivel extension can be turned with a Phillips            • Designed specifically to fit where there is limited space
  screwdriver, 3/8” ratchet or driver, or 14mm wrench or socket        • Ratchet mechanism works one way
• Spark plug socket can be turned with 3/8” driver, 19 mm wrench,      • Fits standard 13/16” plugs
  or 19 mm socket
• Spark plug socket can be used with a screwdriver to hold the front
  19 mm hex axles on late-model 4-stroke motorcycles
• Fits KTM 4-strokes, DR-Z400, CRF450R, YZ/WR400/426F,
  YZ250F, KLX300, DVX400 and many other motorcycles and ATVs
  with with 5/8” spark plugs




Spark Plug Wrench                                                      Spark Plug Socket
& Unique Holder                                                        121-08175
                                                                       Originally designed for Honda XR400s as a trail tool, but fits many

329-02024                                                                models with 18mm plugs
                                                                       • Thinwall design to fit into low clearance plug cavity
• Air cooled wrench & unique holder carries 2 plugs and 1 wrench.      • Versatile design allows socket to be driven with various tools
• For use with 13/16 in. spark plugs on air cooled bikes.                including the Motion Pro spark plug ratchet wrench, 3/8 in.
                                                                         ratchet, 13/16 in. wrench, tool kit bar, or a Phillips screw driver
                                                                         placed through the 8.5 mm hole at the top of the socket
                                                                       • For use on following applications:
                                                                       • Honda XR250R 84-03, XR350R 83-85, XR400R 96-04, XR500R
                                                                         81-84, XR600R 85-00, XR650L 93-07, TRX300 88-91,TRX400EX
                                                                         99-07, TRX400FW 96-99, TRX400ES 00, CRF150F 03-08,
                                                                         CRF230F 03-08
                                                                       • Kawasaki KLF400 93-96
                                                                       • KTM 400SXC 2000, 620LC4 96-97, 620SX 97-98, 640 LC4 99
                                                                       • Suzuki LT160E 90-92
329-02025                                                              • Yamaha YFM250 99-05, YFM350X 86-88 & 90-99, YFM600 98-
• Water cooled wrench & unique holder carries 2 plugs and 1 wrench.      01, XT225 92-02,TT600 85
• For use with 13/16 in. spark plugs on water cooled bikes.




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                 Fax: (626) 792-5341
                                                                                                 www.FlandersCo.com
                                                                                                                                               29
                               Spark Plug Wrenches
     Spark Plug Wrench                             Honda Spark Plug Wrench
     401-04100                                     401-04116
     3-Way for 10mm, 12mm, and 14mm plugs          16mm, 4.75” long, zinc plated.
                                                   HON# 89216-KYZ-700 Replacement



     Spark Plug Wrench                             Honda Spark Plug Wrench
     401-04110                                     401-04117
     12mm, fits NGK “D” series & ND “X” series.     4.75” long, zinc plated.
     4.75” long, Zinc plated.                      HON# 89216-MV9-000 Replacement




     Spark Plug Wrench                             Honda Spark Plug Wrench
     401-04111                                     401-04118
     13/16” for 14mm plugs.                        5.75” long, zinc plated.
                                                   HON# 89216-MR1-000 Replacement




     Spark Plug Wrench
     401-04113
     Fits most watercooled 2-stroke M/C, ATVs, &
      PWC with 13/16” plugs.



                                                                                     REV. 06-02-08



30           (626) 792-7384
          www.FlandersCompany.com
                                                               Fax: (626) 792-5341
                                                               www.FlandersCo.com
                                                   Upper Engine
Tappet Tool Set                                                      Multi-Valve Tools
                                                                     • Dramatically reduces the time necessary to replace valves in
121-08073                                                              modern 16 to 20 valve heads
• Heat treated and chrome plated for durability                      • Used to install valve spring keepers
• Set includes three wrenches, 8mm, 9mm & 10mm and three             • Replaces the large clamp-type valve spring compressor
  adjusters, screw type, 3mm & 4mm square                            • The small tool is designed to fit the valves of 4 and 5 valve
• Interchange adjusters and wrenches for 9 different combinations      cylinder head (5mm valve stem dia. or smaller)
• Fits nearly all Honda & Suzuki motorcycles and ATV’s with screw-   • The large tool is designed to fit valves with cylinder heads (5.5mm
  type adjuster as will as Yamaha SR 185/250, XT/TT250 & XS400         valve stem diameter or larger) with under 40 lbs. seat pressure
                                                                     • Instructions included
                                                                     • Made in U.S.A.


                                                                     Small Multi-Valve Tool
                                                                     121-08165
Universal Valve Adj. Kit                                             Large Multi-Valve Tool
6 Piece Kit - Hon, Kaw, Yam
                                                                     121-08166
325-01055
• Fits most 4-stroke single & multi-cylinder models.
• 8mm, 9mm, & 10mm wrench sockets w/straight slot & square tip
  adjusters & rocker adjuster nuts.




                                                                     British Valve Adjustment
                                                                     Tool - 2 Piece Kit
                                                                     325-01049
Universal Valve Adj. Kit                                             • Fits most (1950-1970’s) Triumph twins 500, 650, & 750cc
4 Piece Kit                                                            models. 7/16 USA - British 1/4 BS, 3/16 W, 5/16 BS, 1/4 W

325-01016
• Fits most 4-stroke single &
  multi-cylinder models.
• 9mm, & 10mm wrench sockets
  w/straight slot &
  square tip adjusters
  & rocker adjuster nuts.


 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                              Fax: (626) 792-5341
                                                                                              www.FlandersCo.com
                                                                                                                                            31
                                         Upper Engine
     Tappet Feeler Gauges                      Valve Shim Tools
     • Accurate tappet adjustments             • For adjusting valve clearance on twin-cam models
     • Makes adjustment quick and easy         • Holds valve spring bucket/collar down so adjusting shims
     • Packed 6 per display card                   can be removed
     • Made in the U.S.A.                      • Manufactured for hardened alloy steel

                                               121-08017 Suz/Yam Valve Tool
     121-08052 (Card/6)                        • Replaces Suzuki tool 09916-64510 and Yamaha tool YM-04125
                                               • Fits all Suzuki 4-stroke models with shim-type valve tappets
     121-08392 (Each)                          • Fits all Yamaha XJ600 Seca II models
     Sizes .002 & .003” Fits most Honda &
     some Suzuki models                        121-08018 Honda Valve Tool
                                               • Fits all CB750(ALL) 79-82, CB750SC 83, CB900C/F 80-82,
                                                 CB1000C 83, CB1100F 83,
     121-08053 (Card/6)                          CBX1050 79-82

     121-08393 (Each)
     Sizes .004 & .005” Fits some Honda
     models & Yamaha Singles

     121-08054 (Card/6)
     121-08394 (Each)                          Kawasaki Valve Tool
     Sizes .006 & .008” Fits BMW models
     and Kawasaki KL models                    121-08019
                                                • Fits all KZ 750/900/1000/1100/1300 models

     121-08055 Two Each of Above
     121-08378 (Card/6)
     121-08398 (Each)
     Sizes .005 & .024” Fits all 02-06 KTM
     250/450/525 4-strokes
                                                Yamaha Valve Tool
                                                121-08020
                                                • Replaces Yamaha OEM YM-01245
                                                • Fits all DOHC except: XZ550, XVZ1200/1300, FJ1100/1200,
                                                  XT250, XT/TT350




                                                                                                            REV. 06-02-08



32             (626) 792-7384
            www.FlandersCompany.com
                                                                      Fax: (626) 792-5341
                                                                      www.FlandersCo.com
                                                   Upper Engine
Valve & Rocker Clearance Piston Pin Tool
Adjustment Tools         121-08068
325-01016                • Aids in removing piston pins
                         • Fits all piston sizes from 40mm (1 5/8 in.) to 100mm (4 in.) and
 4 piece kit for fast, precision valve adjustment. Honda all 4 cycle     all piston pins from 12mm (1/2 in.) to 25mm (1 in.), including
 street & dirt including ATC models. Yamaha most late model 4            all single-cylinder engines from 50cc to 600cc and all 2, 3, &
 cycle. All makes using 9mm and 10mm rocker adjustor nuts.               4-cylinder models
325-01020                                                              • Will not damage piston during removal
                                                                       • Made in the U.S.A.
 Kawasaki 600, 750 & Ninja 1000 using 8mm
 & 10mm adjuster nuts




                        Spring Hooks
Valve Spring Compressor Made in the U.S.A
121-08247               121-08065 Standard Hook
• Improved quick action design
• Replacement for Honda tool 07757-0010000 &
  Kowa tool AKS-215-1010 OEM tools
• Accepts Motion Pro adapters (121- ) as well as Honda OEM
  adapters 07GME-KT70200, 07JME-KY20100,
  and 07959-KM30101 for use in shim under bucket and small
  diameter valve spring keeper applications
• Both cup-type and ball-type tips are included
                                                                       121-08127 Heavy Duty Hook




Adapter
121-08248
 For use in shim under bucket and small diameter
 valve spring keeper applications.

 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                Fax: (626) 792-5341
                                                                                                www.FlandersCo.com
                                                                                                                                          33
                                                           Upper Engine
     Gear Jammer                                                           Four Stroke
     121-08427                                                             Leak Down Tester
                                                                           121-08126
     • Locks gears in place for easy                                       • Designed to check the amount of cylinder leakage in a 4-stroke
       installation and removal                                              engine
     • Allows tightening lock nuts to                                      • With an air source of 70 to 160 psi. this system will pressurize the
       proper torque setting                                                 cylinder with 60 psi. of air
     • Works on virtually any motor                                        • Gauge will register the total percentage of leakage past the rings,
     • Powerful magnet holds tool in                                         head gasket, intake and exhaust valves
       place during use                                                    • 10, 12, & 14mm spark plug thread hoses, regulator and gauge
     • Billet 6061 T-6™ aluminum construction                                included
     • Blue anodized finish with laser engraved Motion Pro logo             • Speeds up troubleshooting & helps to isolate bad components
     • Originally developed for removing and installing the primary gear   • Includes convenient carrying box & instructions
       on a Honda CRF 450                                                  • Made in the U.S.A.
     • Made in USA
     • Not for use with impact guns
     • Patent pending

     Cam Gear Holder
     121-08437
     • Allows you to easily torque the
       cam gear bolts on a 2002-2006
       CRF450R/X & 2004-2008 TRX450R/
       ER without a second person                                          Two Stroke
     • Holds cam gear in place during
       removal / installation of bolts
                                                                           Leak Down Tester
     • Works on stock and aftermarket CRF450 & TRX450 cam gears            121-08071
     • Reduces stress on cam chain and adjuster                            • Check for air leaks in 2-stroke engines
     • Billet 6061 T-6™ aluminum construction with hardened steel pin      • Includes air pressure gauge, pump-up bulb and all the fitting and
     • Blue anodized finish with laser engraved Motion Pro logo               adapters for single and twin cylinder 2-stroke motorcycle engines
     • Made in USA                                                         • Packed with instructions in a convenient carry box

     Stud Installation Tools
     121-08152 Set of 3 Metric
     • Will install cylinder studs on most motorcycles
     • Hex head is 3/4 in. or 19mm
     • Sold individually and in a set with three metric sizes
     • Made in the U.S.A.
     121-08149           M6 x 1.00
     121-08150           M8 x 1.25
     121-08151           M10 x 1.25
     121-08148           3/8” x 16
                                                                                                                                          REV. 06-02-08



34               (626) 792-7384
              www.FlandersCompany.com
                                                                                                   Fax: (626) 792-5341
                                                                                                   www.FlandersCo.com
                                                    Upper Engine
154-06880                                                                                 The
                                                                                         Mityvac
The Leakdown Checker           will pinpoint compression ring leaks,
exhaust and intake valve leaks, leaks between cylinders or into the                 LEAKDOWN TESTER
water jacket, or other causes of compression loss.
Cylinder leakage tests have traditionally been done using compressed
air and special gauges. If compressed air wasnʼt available, the test
could not be done. If compressed air was used, and the piston was
not in exactly the right place, the engine could accidentally turn over,
creating a safety hazard.
The Mityvac leakdown checker allows a mechanic to do the test in
either the shop or the field. Some mechanics, for example, use it at
the racetrack or when checking out a used car, when air may not be
available.
The Mityvac leakdown checker requires no compressed air, no special
gauges other than its own built-in gauge, nor any special training.
Because it uses vacuum instead of pressure, itʼs far safer.
Itʼs fast, easy, accurate and itʼs completely portable.



                                                                    Torque Wrench Adapter
                                                                    121-08134
                                                                    • Chrome-vanadium tool steel with satin-chrome finish
                                                                    • Properly torque two-stroke cylinder base nuts
                                                                    • Will fit 12mm and 14mm nuts

Compression Tester                                                  • Extends the reach of 3/8” drive torque by 3”
                                                                    • Chart supplied
121-08188                                                           • Check owners manual for proper torque specifications
Designed to check cylinder compression
• Contains hoses for 10, 12 & 14mm spark plug applications
• Features a quick disconnect with a pressure release valve and a
  300 psi. gauge
• Packed in a convenient carry box, complete with instructions


                                                                    Adjustable Torque
                                                                    Wrench Adapter
                                                                    121-08380
                                                                    • Torque any fastener with a combination wrench or Allen wrench
                                                                    • Will work with 6mm (1/4”) through 19mm (3/4”)
Compression                                                           combination wrenches
                                                                    • Will work with 6mm and 8mm Allen wrenches
Tester 715-06400
Motorcycle compression tester with 10, 12, 14,
                                                                    • Heat-treated steel with a black oxide finish
                                                                    • 3/8” square drive is rated for a maximum torque of 90 ft-lbs
& 18mm adaptors included

Replacement Adaptors
715-02782 10mm.
715-02783 12mm.
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                                                                                                                      35
                                                   Mag Pullers




           121-08160                  121-08257                 121-08306                121-08321             121-08349




       121-08372            121-08386              121-08390                121-08425        325-01001          325-01002




     325-01003            325-01004               325-01005               325-01006          325-01007          325-01008




     325-01009         325-01010         325-01011            325-01012          325-01013      325-01014        325-01017




     325-01018           325-01019            325-01021              325-01030           325-01031          325-01037
                                                                                                                        REV. 06-02-08



36           (626) 792-7384
          www.FlandersCompany.com
                                                                                        Fax: (626) 792-5341
                                                                                        www.FlandersCo.com
                                              Mag Pullers




325-01039                    325-01042      325-01043     325-01045              325-01046           325-01050




                 325-01051                 325-01052                 325-01054                       325-01064



                                         Mag Pullers by Size
   16mm x 1.5 RH - male                    325-01010    30mm x 1.0 RH - female                   121-08386
   18mm x 1.5 RH - male                    325-01006    30mm x 1.5 RH - female                   325-01008
   18mm x 1.5 RH - male                    325-01017    30mm x 1.5 RH - female                   325-01014
   18mm x 1.5 RH -male                     325-01018    30mm x 1.5 RH - male                     325-01004
   19mm x 1.0 RH - male                    325-01050    33mm x 1.5 RH - female                   121-08390
   19mm x 1.5 RH - male                    325-01019    33mm x 1.5 RH - female                   325-01064
   20mm x 1.5 RH - male                    325-01007    33mm x 1.5 RH - male                     325-01002
   20mm x 1.5 RH - male                    325-01009    35mm x 1.5 RH - female                   325-01005
   20mm x 1.5 RH - male                    325-01021    35mm x 1.5 RH - female                   121-08349
   22mm x 1.5 RH - male                    325-01011    36mm x 1.5 RH- female                    325-01052
   24mm x 1.0 RH - female                  325-01030    38mm x 1.5 RH - female                   121-08306
   24mm x 1.0 RH - male                    325-01043    38mm x 1.5 RH - female                   325-01042
   24mm x 1.5 RH - female                  121-08257    38mm x 1.5 RH - female                   121-08321
   26mm x 1.0 RH - female                  325-01046    42mm x 1.5 RH - female                   325-01039
   26mm x 1.5 RH - male                    325-01012    50mm x 1.5 RH - female                   325-01031
   27mm x 1.0 LH - male                    325-01001    50mm x 1.5 RH - female                   325-01031
   27mm x 1.25 RH - male                   325-01003    3 Hole Disc w/3-6mm bolts                325-01054
   28mm x 1.0 RH - female w/12mm protec    121-08425    6 Hole Disc w/3-6mm & 3-8mm bolts        121-08160
   28mm x 1.0 RH - female w/14mm protec    121-08372    7 Hole Disc w/3-6mm bolts                325-01051
   28mm x 1.5 RH - male                    325-01045    8 Hole Disc w/3-6mm bolts                325-01013
                                                        12 Hole Disc Universal w/6 & 8mm bolts   325-01037
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                            Fax: (626) 792-5341
                                                                            www.FlandersCo.com
                                                                                                                 37
                                                         Pullers
                                                Mag Pullers by Application
     ATK - ROTAX                                            CM185T                        1978-1979   325-01010   XR400R                       2000-2003   325-01021
     30mm x 1.5 RH - male                       325-01004   XL/XR185                                  325-01019   CB450                                    325-01017
     26mm x 1.5 - male                          325-01012   ATC200 / BIG RED                          325-01019   CB450SC                      1982-1983   325-01021
     35mm x 1.5 RH - female, incl               325-01029   CM200T                        1980-1982   325-01010   CB450SC                      1985-1986   325-01021
       600cc
                                                            XL/XR200 - 20mm X 1.5 RH                  325-01010   CB450T                       1982        325-01021
                                                            XL/XR200 - 14mm X 1.5 RH                  325-01009   CM450 A,C,E                  1981-1983   325-01021
     ARCTIC CAT
                                                            ATC250ES                      1985-1987   325-01021   CM450 A,C,E                  1981-1983   325-01010
     DVX400                         2004-2007   325-01042
                                                            ATC250R                       1980-1986   325-01001   CMX450                       1987        325-01021
                                                            ATC250SX                      1985-1987   325-01021   CR450R                       1981        325-01001
     BOMBARDIER
                                                            CMX250                        1985-1987   325-01010   CRF450R                      2002-2007   121-08257
     DS650                          2000-2007   121-08321
                                                            CR250 Early - 18mm X 1.5 RH               325-01006   CRF450R                      2002-2007   325-01067
                                                            CR250 Early - 20mm X 1.5 RH               325-01007   CRF450X                      2004-2007   121-08425
     HONDA
                                                            CR250R                        1973-1982   325-01010   TRX450R                      2004-2005   121-08372
     CRF50F                         2004-2008   325-01001
                                                            CR250R                        1978-1980   121-08372   TRX450R/ER                   2006-2008   121-08425
     XR50R                          2000-2003   325-01001
                                                            CR250R                        1988-2007   325-01001   CR480R                       1982-1983   325-01001
     CRF70F                         2004-2007   325-01001
                                                            CRF250X - CRF250R             2004-2007   121-08257   CB500T - w/points            1975-1976   325-01010
     TRX70                          1986-1987   325-01001
                                                            CRF250X - CRF250R             2004-2007   325-01067   CR500R Early-18mm X 1.5 RH               325-01006
     CR80R                          1996-2002   325-01001
                                                            FL250 ODYSSEY                 1977-1984   325-01001   CR500R Early-20mm X 1.5 RH               325-01007
     CR80RB                         1996-2002   325-01001
                                                            MR250                         1976        325-01021   CR500R                       1988-2001   325-01001
     CRF80F                         2004-2008   325-01001
                                                            MT250                         1974-1976   325-01001   CX500                        1978-1979   325-01021
     XL80                           1980-1985   325-01001
                                                            NX250                         1988-1990   325-01021   CX500C                       1979-1982   325-01021
     XR80R                          1999-2003   325-01001
                                                            TL250                         1975-1976   325-01011   CX500D                       1979-1981   325-01021
     CR85R                          2003-2007   325-01001
                                                            TRX250                        1985-1987   325-01021   CX500TC                      1982        325-01021
     CR85RB                         2003-2007   325-01001
                                                            TRX250R                       1986-1989   325-01001   FT500                        1982-1983   325-01011
     ATC90                          1970-1978   325-01010
                                                            VTR250                        1988-1990   325-01021   GB500                        1989-1990   325-01011
     TRX90                          1993-2005   325-01001
                                                            XL/XR250 - Early              1972-1976   325-01011   GL500 / GL500I               1981-1982   325-01021
     CT90                           1966-1979   325-01010
                                                            XL/XR250                                  325-01009   VF500C                       1984-1986   325-01011
     CRF100F                        2004-2008   325-01001
                                                            XR250L                        1991-1996   325-01009   VF500F                       1984-1986   325-01009
     XL100                          1974-1985   325-01001
                                                            XR250R                        2000-2003   325-01011   VT500C                       1983-1986   325-01011
     XR100R                         1981-2003   325-01001
                                                            TRX300EX                      1993-2008   325-01021   VT500FT                      1983-1984   325-01011
     ATC110 - With CDI              1979-1985   325-01001
                                                            TRX300FW                      1988-2000   325-01021   XL500S                       1979-1981   325-01011
     ATC110 - With Points           1979-1985   325-01010
                                                            ATC350X                       1985-1986   325-01021   XR500                        1979-1980   325-01011
     CB125                          1973-1985   325-01019
                                                            CB350G                        1973        325-01010   CB550                                    325-01010
     CR125 Early - 18mm X 1.5 RH                325-01006
                                                            SL350 - w/points              1969-1973   325-01010   CBR600F                      1987-1990   325-01021
     CR125 Early - 20mm X 1.5 RH                325-01007
                                                            TRX350                        1986-1987   325-01021   VT600C,CD,CD2                1988-2007   325-01011
     CR125M                         1974-1978   325-01010
                                                            TRX350D                       1986-1987   325-01021   XL/XR600R                    1983-2000   325-01011
     CR125R                         1979-1982   325-01010
                                                            XL350                         1974-1978   325-01011   CB650                        1979-1982   325-01010
     CR125R                         1988-2007   325-01001
                                                            XL350R                        1984-1985   325-01021   CB650SC                      1983-1985   325-01018
     TRX125                         1985-1988   325-01001
                                                            XR350R                        1984-1985   325-01021   CX650C                       1983        325-01021
     XL125                          1974-1985   325-01019
                                                            CB360                         1974        325-01010   CX650T                       1983        325-01021
     CRF150R/RB                     2007-2008   121-08257
                                                            CB400 A,T1,T2                 1978-1979   325-01021   GL650                        1983        325-01021
     CRF150R/RB                     2007-2008   325-01067
                                                            CB400                         1980-1981   325-01010   GL650I                       1983        325-01021
     CB175 - w/points               1969-1973   325-01010
                                                            CM400A                        1979-1981   325-01021   NT650                        1988-1991   325-01011
     SL175 - w/points               1970-1972   325-01010
                                                            CM400C                        1981        325-01021   NX650                        1988-1989   325-01011
     XL175                          1976-1978   325-01001
                                                            CM400E                        1980-1981   325-01021   XR650L                       1993-2000   325-01011
     ATC185 / 185S                  1980-1983   325-01001
                                                            CM400T                        1979-1981   325-01021   XR650R                       2000-2007   325-01021
     ATC185                         1980-1983   325-01019
                                                            TRX400EX                      1999-2007   325-01021   XR650L/R                     2000-2007   325-01011
                                                                                                                                                             REV. 06-02-08



38                (626) 792-7384
               www.FlandersCompany.com
                                                                                                                  Fax: (626) 792-5341
                                                                                                                  www.FlandersCo.com
                                                       Pullers
                                             Mag Pullers by Application
Honda . . . continued                                    KAWASAKI                                              KLF300 - 30mm x 1.5                        325-01008

CB700SC Nighthawk                1984-1986   325-01010   50cc Mini’s                               325-01043   KLF300- 30mm x 1.5, 1”depth                325-01014

VF700C                           1984-1986   325-01011   KDX50                        2003-2006    325-01001   KLF300A                       1986-1987    325-01010

VF700C                           1987        325-01021   KX60                         1988-2003    325-01001   KH400 - w/points              1976-1978    325-01010

VF700F                           1984-1985   325-01011   KX65                         2000-2007    325-01001   KLX400B                       2003         121-08306

VF700S                           1984-1985   325-01011   KV75                         1976-1980    325-01001   KLX400B                       2003         325-01042

VFR700                           1986        325-01011   KD80                         1976,1980-   325-01001   KSF400A - KFX400              2003-2006    121-08306
                                                                                        1987                   KSF400A - KFX400              2003-2006    325-01042
VT700C                           1984-1987   325-01021
                                                         KDX80                        1980-1988    325-01001   KZ400                         1978-1979    325-01018
CB750A/K/F                       1969-1978   325-01009
                                                         KX80                         1998-2000    325-01001   KX420                         1980-1981    325-01010
CB750K/F/L                       1979-1982   325-01017
                                                         KX85                         2001-2007    325-01001   KZ440                         1980-1983    325-01018
VF750C                           1982-1983   325-01011
                                                         KE100                        1976-2001    325-01001   KLX450R                       2008         121-08425
VF750C                           1988        325-01021
                                                         KM100                        1976-1981    325-01001   KX450F                        2006-2008    121-08257
VF750F                           1983-1984   325-01011
                                                         KV100                        1970-1975    325-01001   KX450F                        2006-2008    325-01067
VF750S                           1982-1983   325-01011
                                                         KX100                        1995-2007    325-01001   EN500                                      325-01010
VFR750                           1986        325-01011
                                                         KLF110                       1996-2000    325-01018   EN500                         1990-2002    325-01018
VT750C                           1982-1983   325-01021
                                                         KLT110                       1984-1986    325-01010   EX500                                      325-01010
VT750C,CD,CD2                    1998-2000   325-01011
                                                         KLX110                       2003-2008    121-08372   EX500                         1987-2006    325-01018
PC800                            1989-1990   325-01021
                                                         F6 - 125                     1971-1973    325-01001   KX500                         Pre ‘81      325-01010
PC800                            1994-1998   325-01021
                                                         KE125                        1976-1983    325-01001   KX500                         1997-2004    325-01001
VFR800                           1998-2000   325-01021
                                                         KS125                        1974-1975    325-01001   KZ550 gpz                     1981-1985    325-01010
VT800C                           1988        325-01021
                                                         KX125                        1974-1981    325-01010   KZ550 gpz                     1980-1983    325-01018
CB900C/F                         1980-1982   325-01017
                                                         KX125                        1993-2005    325-01001   KLR600 - 22mm x 1.5           1984-1986    325-01011
CBR900RR / 929RR / 954RR         2000-2003   325-01021
                                                         KLT160                       1985         325-01005   KLR600 - 20mm x 1.5           1984-1986,   325-01009
CB1000                           1983        325-01017
                                                         F7 - 175                     1974-1975    325-01001   ZX600                         1985-1997    325-01010
VF1000F/R                        1984-1986   325-01011
                                                         KE175                        1976-1981    325-01001   ZX600                         1985-1997    325-01018
CB1100F                          1983        325-01017
                                                         KLT185                       1986-1987    325-01005   ZX/ZXR600                     1987-1999    121-08349
VF1100C                          1983-1986   325-01011
                                                         KDX200                       1997-2006    325-01001   KLR650 - 20mm x 1.5           1987-1995    325-01009
VF1100S                          1984-1985   325-01011
                                                         KLT200                       1983-1984    325-01010   KLR650 - 22mm x 1.5           1987-2006    325-01011
VT1100C                                      325-01021
                                                         KZ200                        1978-1979    325-01018   KL650B TENGAI - 20mm x 1.5    1990-1991    325-01009
                                                         KDX220R                      1997-2005    325-01001   KL650B TENGAI - 22mm x 1.5    1990-1991    325-01011
HUSABERG
                                                         EX250E/F                     1986-2007    325-01010   KZ650                         1978-1983    325-01018
Most 4-stroke 400,500,600                    325-01012
                                                         EX250E/F                     1986-2007    325-01018   KZ750                         1976-1984    325-01018
FE450E                           2007        325-01046
                                                         KDX250                       1980-1984    325-01001   VN750                         1986-2006    325-01010
FE650E                           2007        325-01046
                                                         KL250A                       1978-1982    325-01018   VN750A                        1986-2006    325-01018
                                                         KLR250/KL250D - 20mm x 1.5   1985-1995    325-01009   ZX750A gpz                    1983-1985    325-01010
HUSQVARNA
                                                         KLR250/KL250D - 22mm x 1.5   1985-1995    325-01011   ZX750A gpz                    1983-1985    325-01018
1960-1970 w/ Ignition Points                 325-01002
                                                         KLT250                       1982-1985    325-01010   KZ900 A4,A5,B1 LTD            1973-1976    325-01010
1970-1980 2-strokes w/ CDI’s                 325-01003
                                                         KSF250 MOJAVE                1987-2004    325-01005   KZ900 A4,A5,B1 LTD            1976-1980    325-01018
1990-Up WX series 2-strokes                  325-01011
                                                         KSF250 MOJAVE                1987-1999    325-01029   Z1 900A/B                     1973-1975    325-01010
Late model 2-strokes w/ CDI’s                325-01012
                                                         KSF250 MOJAVE                1996-2000    325-01018   ZX9                           1998-2003    121-08306
1990-Up E-series 350 4-strokes               325-01045
                                                         KX250                        1974-1979    325-01010   ZX9                           1998-2003    325-01042
1990-Up E-series 610 4-strokes               325-01045
                                                         KX250                        1992-2007    325-01001   KZ1000A/B/C                   1977-1980    325-01010
250,450,510cc 4-stroke                       325-01046
  TE,TC,SM,SMR                                           KX250F                       2004-2008    121-08257   KZ1000A/B/C                   1977-1980    325-01018
                                                         KX250F                       2004-2008    325-01067   KZ1100                        1981-1983    325-01018
                                                         KZ250                        1980-1981    325-01018   ZX1100A gpz                   1983-1984    325-01010
                                                         KLF300 - 35mm x 1.5                       325-01005   ZX1100A gpz                   1983-1984    325-01018
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                               Fax: (626) 792-5341
                                                                                                               www.FlandersCo.com
                                                                                                                                                                      39
                                                               Pullers
                                                     Mag Pullers by Application
     Kawasaki . . . continued                                                                                       LT250R Quadracer        1985-1990        325-01001
                                                                 450 SX               2003-2006        325-01046
     ZX12                                2000-2006   121-08306                                                      LT-4WD 250 / LTF-4WDX   1987-1998        325-01042
                                                                 450 SXF              2005-2006        325-01046
     ZX12                                2000-2006   325-01042                                                      LT-4WD 250 / LTF-4WDX   1987-1998        121-08306
                                                                 450 XC               2007             325-01046
     KZ1300A/B                           1979-1982   325-01010                                                      LTF250F                 2001-2002        325-01042
                                                                 450 XCG              2006             325-01046
     KZ1300A/B                           1979-1980   325-01018                                                      LTF250F                 2001-2002        121-08306
                                                                 450 XCW              2007             325-01046
                                                                                                                    LTF250                  2002-2007        325-01042
                                                                 520 EXC / MXC / SX   2000-2002        325-01046
     KTM                                                                                                            LTF250                  2002-2007        121-08306
                                                                 525 EXCG             2003-2006        325-01046
     Most current 2-strk Liquid cooled               325-01003                                                      LTZ250 - 38mm           2004-2007        325-01042
                                                                 525 MXCG             2003-2005        325-01046
     125,250,300,360,495 XC &                        325-01012                                                      LTZ250 - 38mm           2004-2007        121-08306
                                                                 525 XC               2007-2008        325-01046
       MX 2-strokes                                                                                                 LTZ250 - 50mm           2004-2007        325-01031
                                                                 525 XCG              2006             325-01046
     250,400,450,525,620                             325-01046                                                      PE250                   1977-1981        325-01013
                                                                 525 XCW              2007             325-01046
       EXC,MXC 4-strokes
                                                                                                                    RM250                   1987 & Earlier   325-01013
                                                                 530 XCRW             2008             325-01046
     250,400,450,525,620 SMC,SX                      325-01046
       4-strokes                                                 SUZUKI                                             RM250                   2000-2007        325-01001

     SX & SR Mini Racers                             325-01050   50cc Mini’s                           325-01043    RMZ250                  2004-2007        121-08257

     SX & SR Mini Racers                             325-01051   JR50                 1978-2006        325-01001    RMZ250                  2004-2007        325-01067

     50 SX Pro Jr LC / Sr LC             2002-2008               RM60                 1979-1983        325-01013    SP250                   1982-1985        325-01013

     50 SX Pro Jr Adv / Sr Adv           2002-2008               RM65                 2003             325-01001    TM250                                    325-01008

     50 Mini Adv /Jr Adv / Sr Adv        2002-2008               DS80                 1978-2000        325-01001    TS250                                    325-01008

     65 SX                               1999-2008   325-01001   LT80                 2004-2006        325-01031    LT300E                                   325-01005

     85 SX                               2004-2008   325-01001   RM80                 1987 & Earlier   325-01013    LT300E                                   121-08349

     105 SX                              2004        325-01001   RM80 / 85            1988-2008        325-01001    LTF300F                 1999-2001        325-01042

     105 SX                              2006-2008   325-01001   RM80                 1989-2001        121-08424    LTF300F                 1999-2001        121-08306

     125 EXC                             1998-2002   325-01001   RM85                 2002-2008        121-08424    DR350                                    325-01005

     125 SX                              1998-2008   325-01001   LTZ90                2007             325-01031    DR350                                    121-08349

     200 EXC                             1998-2005   325-01001   DR100                1983-1990        325-01001    DR370                   1978-1979        325-01013

     200 MXC                             1998-2002   325-01001   RM100                1987 & Earlier   325-01013    RM370                   1987 & Earlier   325-01013

     200 XC / XCW                        2006-2008   325-01001   RM100                2003             325-01001    SP370                   1978-1979        325-01013

     250 EXC                             2000-2005   325-01001   DRZ110               2003-2005        325-01073    AN400                   2003-2007        325-01042

     250 MXC                             2000-2002   325-01001   DR125                1982-1988        325-01001    AN400                   2003-2007        121-08306

     250 SX                              2000-2008   325-01001   LT125                1983-1987        325-01001    DR400                   1980             325-01013

     250 SXF                             2005-2008   325-01046   RM125                1987 & Earlier   325-01013    DRZ400E / EK            2000-2007        325-01042

     250 XC / XCW                        2006-2007   325-01001   RM125                1998-2007        325-01001    DRZ400E / EK            2000-2007        121-08306

     300 EXC                             1998-2005   325-01001   TM125                1973-1975        325-01008    DRZ400K                 2001-2007        325-01042

     300 MXC                             1998-2005   325-01001   LT160                1989-2003        325-01008    DRZ400K                 2001-2007        121-08306

     300 XC / XCW                        2006-2007   325-01001   LT160 E              1989             325-01001    DRZ400S                 2000-2006        325-01042

     380 EXC                             1998-2001   325-01001   PE175                1978-1984        325-01013    DRZ400S                 2000-2006        121-08306

     380 MXC                             1998-2001   325-01001   ALT185               1985             325-01001    DRZ400SM                2005-2007        325-01042

     380 SX                              1998-2001   325-01001   DR200                1986-1988        325-01001    DRZ400SM                2005-2007        121-08306

     400 EXC                             1998-2002   325-01046   LT230 / LT230F       1985-1993        325-01008    DRZ400Y                 2000             325-01042

     400 EXCG                            2004-2006   325-01046   DR250 Off Road       1986-1988        325-01013    DRZ400Y                 2000             121-08306

     400 MXC                             2001-2002   325-01046   DR250 Dual Sport                      325-01005    GSF400                  1991-1993        325-01005

     400 SX                              1998        325-01046   DR250                                 121-08349    GSF400                  1991-1993        121-08349

     400 SX                              2000-2002   325-01046   DRZ250               2001-2007        121-08306    LTA400                  02-04, 2006      325-01031

     400 XCW                             2007        325-01046   DRZ250               2001-2007        325-01042    LTF400                  2002-2004        325-01031

     450 EXCG                            2003-2006   325-01046   LT250                                 325-01008    LTF400F / LTA400F       2002-2007        325-01031

     450 EXCR                            2007-2008   325-01046   LT250E                                325-01005    LTZ400                  2003-2007        121-08306

     450 MXCG                            2003-2005   325-01046   LT250E                                121-08349    LTZ400                  2003-2007        325-01042

                                                                                                                                                               REV. 06-02-08



40                   (626) 792-7384
                  www.FlandersCompany.com
                                                                                                                   Fax: (626) 792-5341
                                                                                                                   www.FlandersCo.com
                                                      Pullers
                                            Mag Pullers by Application
Suzuki . . . continued                                  GS1100G                1982-1983   325-01010   YZ250F               2004-2008     325-01001

RM400                      1987 & Earlier   325-01013   GS1100GK               1982-1984   325-01010   YZ250F               2004-2008     121-08257

SP400                      1980             325-01013   GS1100GL               1982-1983   325-01010   YZ250F               2004-2008     325-01067

TM400                                       325-01008   GS1100L                1980        325-01010   BW350                1987-1988     325-01037

LTA450X                    2007             325-01031   GS1100S                1983        325-01010   RD350                1973-1975     325-01007

LTR450                     2006-2007        325-01031   GS1100                 1981-1984   325-01014   YFM350A              2004-2005     121-08349

RMZ450                     2005-2007        121-08257   GS1100                 1981-1984   121-08349   YFM350BA             2005-2006     121-08349

RMZ450                     2005-2007        325-01067   GSX 1100F/G (STARTER   1991-       325-01039   YFM350ER             1989-1995     121-08349
                                                          CLUTCH)                Present               YFM350FA             2004-2006     121-08349
RM465                      1987 & Earlier   325-01013
                                                        GSXR 1100 (STARTER     1991-       325-01039   YFM350FW             1989-1999     121-08349
LTA500F                    2000-2007        325-01031
                                                          CLUTCH)                Present
LTF500F                    1998-2007        325-01031                                                  YFM350FX Wolverine   1995-2005     121-08349
                                                        GS1150                 1983-1985   325-01014
DR500                      1981-1983        325-01039                                                  YFM350R              2004-2008     121-08349
                                                        GV1200                 1985-1986   325-01031
RM500                      1987 & Earlier   325-01013                                                  YFM350U              1996-1999     121-08349
                                                        GV1400                 1986-1987   325-01031
SP500X/Z D Series                           325-01039                                                  YFM350X Warrior      1989-2005     121-08349
                                                        VS1400 / S83           1987-2007   325-01031
GS550                      1977-1986        325-01010                                                  YFZ350 Banshee       1987-2006     325-01001
                                                        VL1500 / C90           1998-2007   325-01031
DR600                                       325-01029                                                  YZ360                1974-1975     325-01007
                                                        VZR1800 / M109R        2006-2007   325-01031
GSX600F (STARTER CLUTCH)   1988-2005        325-01039                                                  FZR400               1988-1990     325-01010

GSXR 600 - Early                            325-01009                                                  WR400F               1998-2000     325-01037
                                                        YAMAHA
GSXR 600                   2001-2007        121-08390                                                  WR400 F              1998-2000     121-08160
                                                        CA50                   1985-1986   325-01001
GSXR 600                   2001-2007        325-01064                                                  WR400 F              1998-2000     325-01054
                                                        PW50                   1982-2007   325-01001
SP600F                                      325-01039                                                  YFM400F, FW          1993-1999     121-08349
                                                        YSR50                  1987-1992   325-01001
DR650                                       325-01031                                                  YFM400A              2000-2004     121-08349
                                                        YFM60                              325-01001
DR650                                       325-01039                                                  YFM400F              1993-2007     121-08349
                                                        BW80                   1986-1990   325-01001
GS650                      1981-1983        325-01010                                                  YFM400 FA            2000-2006     121-08349
                                                        YFM80/G/R              1992-2007   325-01001
LS650 / S40                1987-2007        325-01031                                                  YFM400 FAH           2004-2005     121-08349
                                                        YZ80                   1994-2001   325-01001
SV650                      1999-2007        325-01009                                                  YFM400 FWN           2001          121-08349
                                                        YZ85                   2002-2007   325-01001
SV650S                     2001-2007        325-01009                                                  YFM 400 N            00-01, 2003   121-08349
                                                        YFM100                 1987-1991   325-01001
GV 700                                      325-01031                                                  YFM 400 P            2002          121-08349
                                                        YFM125                             325-01001
LTA700X                    2005-2007        325-01031                                                  YFM 400 S            2004          121-08349
                                                        YT125 - Tri-Moto       1980-1985   325-01001
VS700 GLP                  1986-1987        325-01031                                                  YZ 400F              1998-1999     325-01001
                                                        YZ125                  1999-2007   325-01001
GS750                      1977-1983        325-01010                                                  WR426F               2001-2002     121-08160
                                                        YT175 - Tri-Moto       1982-1983   325-01001
GSF750F (STARTER CLUTCH)   1991-Present     325-01039                                                  WR426F               2001-2002     325-01037
                                                        BW200                  1985-1988   325-01037
GSXR 750 - Early                            325-01009                                                  WR426F               2001-2002     325-01054
                                                        IT200                  1984-1986   325-01001
GSXR750                    2001-2007        121-08390                                                  YZ426F               2000-2002     325-01001
                                                        YFM200                 1985-1989   325-01001
GSXR750                    2001-2007        325-01064                                                  WR450F               2003          121-08386
                                                        YFM200                 1985-1989   325-01037
GSXR750 (STARTER CLUTCH)   1991-Present     325-01039                                                  WR450F               2004-2006     325-01064
                                                        YFS200 Blaster         1988-2005   325-01001
VS750                      1988-1991        325-01031                                                  WR450F               2004-2006     121-08390
                                                        TT225                  1986-1987   325-01010
VS800                      1992-1995        325-01031                                                  YFZ450               2004-2006     325-01064
                                                        YFM225                 1987-1988   325-01001
VX800                      1990-1993        325-01031                                                  YFZ450               2004-2006     121-08390
                                                        DT250                  1974-1979   325-01001
GS1000                                      325-01005                                                  YZ450F               2003-2005     325-01001
                                                        WR250F                 2001-2002   325-01054
GS1000                                      325-01010                                                  YZ450F               2006-2008     121-08257
                                                        WR250F                 2001-2002   121-08160
GS1000                                      121-08349                                                  YZ450F               2006-2008     325-01067
                                                        WR250F                 2001-2002   325-01037
GSXR1000 - Early                            325-01009                                                  YZ490                1982-1990     325-01001
                                                        WR250F                 2003-2008   121-08386
GSXR1000                   2001-2006        121-08390                                                  SC500                1973-1974     325-01001
                                                        YFM250                 1989-1991   325-01037
GSXR1000                   2001-2006        325-01064                                                  TT / XT 500          1976-1981     325-01001
                                                        YFM250                 1999-2008   325-01037
GS1100E                    1981-1982        325-01010                                                  XV500                1983          325-01037
                                                        YZ250                  Early       325-01007
GS1100ES                   1983             325-01010                                                  XV535                1987-2000     325-01037
                                                        YZ250                  2000-2007   325-01001
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                       Fax: (626) 792-5341
                                                                                                       www.FlandersCo.com
                                                                                                                                                      41
                                                                     Pullers
       Mag Pullers by                                     Swing Arm Bearing Tool
        Application                                       121-08213
      Yamaha . . . continued
                                                          • Designed for installation of the swingarm bearings
      XJ550 Maxim & Seca          1981-1983   325-01010
                                                            on late-model Japanese motorcycles
      FJ600                       1984-1985   325-01010
                                                          • Puller draws bearing into the swingarm
      FZ600                       1986-1988   325-01010   • Includes three drivers for use with common bearing sizes
      FZR600R                     1989-1999   325-01010   • Kits includes driver sizes I.D. 20mm / O.D 26mm,
      TT / XT 600                 1976-1981   325-01037     I.D. 21mm / O.D. 26mm and I.D. 22mm / O.D.27mm
      XS650                       1974-1983   325-01030
      XJ650 Maxim,Midnight,       1981-1983   325-01010
        Seca,Turbo
      XJ650 Maxim,Midnight,
        Seca,Turbo
                                  1985-1986   325-01010
                                                          Blind Bearing &
      YFM660F
      YFM700R
                                  2002-2006
                                  2006-2008
                                              121-08349
                                              121-08349
                                                          Bushing Remover
      XJ700 Maxim                 1985-1986   325-01010   121-08292
      XV700                       1984-1987   325-01037   • Set includes 30, 25, 20, 17, 15, 12, 10
      FZR750 R                    1987-1988   325-01010     and 8mm collets
      XJ750 Maxim,Midnight,Seca   1981-1983   325-01010   • 2 pound slide-hammer
      XV750                       1981-1983   325-01037   • Crossbar type shaft allows easy collet removal
      XV750                       1988-1997   325-01037   • Necessary tool for most transmission rebuilds
      XJ900 Seca                  1983..      325-01010   • Can be used for wheel bearing 26mm
      XV920                       1981-1983   325-01037     and I.D. 22mm / O.D.27mm
      FZR1000                     1986-1995   325-01010
      FJ1100                      1984-1985   325-01010
      XJ1100 Maxim                1982        325-01010
      XV1100                      1986-1998   325-01037   Crank Case
                                                          Separator
      FJ1200                      1986-1993   325-01010
      XVZ1300                     1986-2008   325-01037

                                                          121-08245
     Clutch &                                             • Will work on most 2 & 4-stroke engines with

     Primary Tool                                           vertically split cases
                                                          • Movable fingers allow a multitude of bolt
     325-01051                                              patterns to be used
                                                          • Included 6mm & 8mm mounting bolts
     • Special 7 hole flywheel puller disc
       w/6mm bolts                                        • Our unique design eliminates binding under
     • Removes clutch bodies, flywheels, &                   heavy loads
       primary gears
     • Fits: KTM SX & SR Mini Racer models,
       Cobra BM & CM series,
       & LEM CR & LX series                               Clutch Puller
                                                          121-08033
                                                          • Fits: Honda FL250 Odyssey 1977-1984
                                                          • Thread size 22mm x 1.8 R.H.
                                                          • For removal of primary belt drive clutch
                                                                                                                             REV. 06-02-08



42                     (626) 792-7384
                    www.FlandersCompany.com
                                                                                                       Fax: (626) 792-5341
                                                                                                       www.FlandersCo.com
                                                            Pullers
CR Seal / Bearing                                                      XR Seal / Bearing
Retainer Tool 44mm                                                     Retainer Tool
121-08228                                                              121-08227
• Versatile design features a 22mm hex and 3/8 in. square drive        • Replaces OEM tool 07710-0010100 to remove and replace the rear
• Precision design prevents damage to the retainer ring after peened     wheel bearing / seal retainer ring, part number 41231-429-000 and
  stakes have been removed by drilling                                   41231-286-000
• 44mm, replaces OEM tool 07710-0010200, to remove and replace         • Versatile design features a 22mm hex and 3/8 in. square drive
  the rear wheel bearing/seal retainer ring,                           • Precision design prevents damage to the retainer ring after peened
  part number 41231-KZ4-000                                              stakes have been removed by drilling
• For use on; CR125/250R 84-99 and CR500R 84-01                        • For use on: XR650L 93-07, XR600R 85-00, XR500 79-84, XR350R
                                                                         83-85, XR250R 84-95, XR200R 81-02, XL200R 83-84, XL250K
                                                                         72-76, MR250 76, CR250M 76




CR Seal / Bearing
Retainer Tool 47mm
121-08256
• Versatile design features a 22mm hex and 3/8 in. square drive
• Precision design prevents damage to the retainer ring after
  peened stakes have been removed by drilling
                                                                       CR Seal / Bearing
• For use on 47mm lock rings                                           Retainer Tool
• Replaces OEM tools 07HMA-KS70100, and 07YMA-KZ40100 to
  remove and replace the rear wheel bearing / seal retainer rings,
                                                                       121-08290
                                                                       • Versatile design features a 22mm hex and 3/8 in. square drive.
  part numbers 41231-KZ4-J20 and 41231-KS6-700
                                                                       • Precision design prevents damage to the retainer ring after peened
• For use on CR125/250R 00-07, CRF450R 02-07, CRF450X 05-08,
                                                                         stakes have been removed by drilling
  CRF250R 04-07, CRF250X 04-07
                                                                       • Replaces the OEM Honda tool to remove and replace the rear wheel
                                                                         bearing / seal retainer ring, part number 41231-430-000
                                                                       • For use on: CR250R 78-83, CR450R 81, CR480R 82-83




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                               Fax: (626) 792-5341
                                                                                               www.FlandersCo.com
                                                                                                                                              43
                                                         Lower Engine
     Rotor & Sprocket Holder                                               Clutch Holding Tool
     121-08270                                                             121-08008
     • Keeps flywheels, rotors and sprockets from rotating during           • Made from medium carbon steel with hardened jaws
       removal and installation                                            • Hold clutch hubs, flywheels, gears, sprockets, etc.
     • Holds sprockets and rotors with holes center to center at a         • Features 8mm spanner pins
       minimum distance of 13mm and a maximum distance of 230mm            • Jaws open up to 5 inches wide
     • Features 5 and 9mm pins                                             • Recommended for square tooth style clutch hubs
     • Adjustable stop-screw keeps tool open at set distance               • Not recommended for v-groove or half round style clutch hubs




     Timing Plug Wrench                                                    Counter Balancer &
     121-08087                                                             Clutch Hub Spanner
     • Fits all the Japanese motorcycles & ATV’s with the
       straight-slot timing plugs
                                                                           for Honda
     • Blade sizes are 16mm (5/8”), 22mm (7/8”), and 38mm (1 1/2”).        121-08385
                                                                           • Replaces 20mm end of Honda OEM tool 07716-0020100
                                                                           • Used to remove Honda OEM nut 90231-KY4-900
                                                                           • 4-Pin spanner made of heat-treated steel
                                                                           • Inside diameter is 20mm
                                                                           • Use with a 3/8” driver

                                                                           Fits Counter Balancer Nut on: CRF450R 02-07, CRF450X 05-08
                                                                           Fits Clutch Hub Nut on: PC50 69-70, Z50 68-99, S65 65-69

     Allen Extension                                                       Fits Crank Shaft Nut on: CA100 (Trail 50) 61-62, CA102 62-69,
                                                                             CA105 (Trail 50) 63-65, CA110 62-69
     121-08184
     • 5mm allen on 3/8 in. drive extension for hard-to-reach case bolts
     • Designed for use with air tools
     • Great for splitting engine cases
     • 6 1/4 in. long




                                                                                                                                      REV. 06-02-08



44              (626) 792-7384
             www.FlandersCompany.com
                                                                                                 Fax: (626) 792-5341
                                                                                                 www.FlandersCo.com
                                                  Lower Engine
Spin-on Oil Filter Wrench Oil Filter & Clutch Hub
121-08016                 Spanner Wrench
                          121-08015
• Especially designed for use on Honda V-type engines
• Fits many Japanese brand motorcycles with             • Made of heat-treated steel
  80mm diameter oil filters                              • Use with a 3/8 inch driver
• Can torque filter to factory specifications             • Inside diameter is 24mm
• Use with a 3/8 inch drive ratchet or extension        • Designed to fit oil filter & clutch hub nut on many Honda models
                                                          (single and twin-cylinder machines)
                                                        • Fits: most pre-78 CB, CL, CT, SL & XL models, XR200 80-84,
                                                          XR200R 81-01, XR250L 91-96, XR250R 86-95 & GL1000 75-77
                                                        • Replaces large end of 07716-0020100 OEM tool




KTM Oil Filter                                          Oil Filter Strap Wrench
Removal Tool                                            121-08069
121-08400                                               • Fits all spin-on type oil filters
• For easy removal of recessed KTM oil filters
• Conical point screw pierces and grabs the             • Use with 3/8 inch drive ratchet or extension
  sheet metal end-cap on filter                          • Can also be used to hold other cylindrically shaped parts
• Contoured handle provides a secure grip               • Maximum strap diameter 125mm ( 5 inches)
• Reduces potential damage to the engine cases
• Not for use on reusable oil filters




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                 Fax: (626) 792-5341
                                                                                 www.FlandersCo.com
                                                                                                                           45
                                            Suspension
     Fork Seal Drivers                           Fork Seal Bullets
     • CAD-II plated carbon steel                • Protects the fork seal and wiper of inverted forks from damage by
     • Split design                               the bushing groove during installation
     • Many sizes available                      • Eliminates the need to wrap the fork tube with tape
     • Each driver is approximately 25oz.        • Set includes all bullets
     • Sold individually
                                                 121-08272 Set of 7
     121-08170 39mm
                                                 121-08273 36mm Red
     121-08123 41mm
                                                 121-08274 41mm Blue
     121-08124 43mm
                                                 121-08275 43mm Green
     121-08125 45mm
                                                 121-08276 45mm Yellow
     121-08331 48mm
                                                 121-08277 46mm Black
     121-08221 35/36mm combo
                                                 121-08278 47mm White
     121-08138 46/47mm combo
                                                 121-08332 48mm Orange
     121-08171 49/50mm combo




                                                 Soft Jaws
                                                 560-90610
                                                 Aluminium inserts to prevent
                                                 marring of sufaces
                                                 clamped in vice.




                                                                                                             REV. 06-02-08



46              (626) 792-7384
             www.FlandersCompany.com
                                                                        Fax: (626) 792-5341
                                                                        www.FlandersCo.com
                                                       Suspension
Seal Mate                                                           Soft Jaw Vertical
• Easy way to keep your fork seals clean and debris free
• Extracts dirt and debris trapped between fork seal and tube       Suspension Vise
• Will work on conventional and up-side down forks                  121-08391
121-08356 Card of 12                                                • Designed to make rebuilding suspension simple and quick
                                                                    • Hold shocks and forks vertically while you change oil, re-valve, or

121-08395 Each                                                        change seals
                                                                    • Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a
                                                                      4 point grip system
                                                                    • Vise holds 39mm to 69mm diameter parts
                                                                    • Vise insert set holds 14mm to 39mm diameter parts
                                                                    • Steel Frame with adjustable pegs is designed to hold clean parts
                                                                      for reassembly

                                                                    HOW IT WORKS ON FORKS
                                                                    • Soft Jaws Fork Peg holds fork slider up for removal of dust seal
                                                                      and seal retaining clip
                                                                    • Bottom slide bar holds forks compressed while bleeding air
                                                                      (priming cartridge) during reassembly and is an excellent platform
                                                                      for adding, adjusting and taking fork oil level measurements
                                                                    • Can be used to assist in removing compression valve assembly
                                                                      (use of stock front axle required)
                                                                    HOW IT WORKS ON SHOCKS
                                                                    • Holds shock firmly around shock body or shock reservoir
                                                                    • Removable aluminum oil catch pan mounts close to the shock to
                                                                      eliminate oil spills/messes
                                                                    • Vise insert set will allow you to hold various shock shaft sizes to
                                                                      re-valve the shock
                                                                    • Facilitates removal of piston rod and seal head
                                                                    • Facilitates removal of shock reservoir caps, chamber pistons or
                                                                      bladder
Fork Oil Level Gauge                                                • Holds shock to remove spherical bearings or needle bearings
                                                                    • Holds shocks for removal of shock spring
121-08121
• For checking and adjusting the oil level on any conventional or
  inverted fork
• Adjustable ring will measure from 0-300mm
  Syringe has a capacity of 60ml




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                             Fax: (626) 792-5341
                                                                                             www.FlandersCo.com
                                                                                                                                            47
                                                              Suspension
     Folding Sag Scale                                                      Telescopic Sag Scale
     121-08336                                                              121-08406
     •   6061-T6 aluminum construction                                      • Simple one person sag setting tool
     •   Rigid folding design fits in most tool boxes                        • Easy to read scale with recording marker
     •   Direct reading scale (no subtracting required)                     • Direct reading scale
     •   Adjustable zero set point with extended range                      • Adjustable for full size offroad and MX bikes
     •   Will work on mini and full size motorcycles                        • Easy set up
     •   Inch and metric scale combination                                  • Will accommodate most hollow rear axles ranging from 9.7mm to
     •   Installs in rear axle                                               20.5mm inside diameter
     •   Can be used to check front or rear sag                             • Attaches directly to rear seat bolt on all mx/offroad applications
     •   Extended length 28 1/4 in.                                          with M6x1.0 & M8x1.25 thread pitches
     •   Folded length 15 3/4 in.                                           • Anodized aluminum body with laser engraved markings
                                                                            • Includes custom blow molded carrying case
                                                                            • Optional clamp P/N 08-0440 (not included) allows attachment to
                                                                             fender
                                                                            • For use on late model KTM we recommend
                                                                             purchasing optional fender clamp p/n 08-0440




     Fork Alignment Tool
     121-08412
     • Quick and easy to use tool for aligning front forks to insure they
       are parallel from top to bottom
     • Knurled adjustment screws for easy setup
     • Improves the handling characteristics of your front suspension
     • Reduces seal and bushing wear
     • Will work on 27 mm - 62 mm fork legs and tubes                       121-08440
     • Works on forks that are 140 mm to 220 mm on center
     • Patent pending
                                                                            Optional Fender Clamp
                                                                            • Allows attachment of UniSag sliding sag scale to fender
                                                                            • For use on late model KTM
                                                                            • Made from 6061-T6 aluminum




                                                                                                                                         REV. 06-02-08



48                (626) 792-7384
               www.FlandersCompany.com
                                                                                                   Fax: (626) 792-5341
                                                                                                   www.FlandersCo.com
                                                       Suspension
Fork Cap Wrench                                                       Damper Rod Fork Tool
121-08236                                                             121-08117
• For removing the fork caps on late-model RMs & CRs                  • Aids in assembly and disassembly of most 41, 43 & 45 Kayaba
• Can be used for removal of a compression stack on                     and Showa inverted forks.
  late-model RMs                                                      • Is used in applications where the manufacturer recommends the
• One end is 46mm, the other is 50mm                                    following tools: Honda OEM Tool # 07PMB-KZ4010A;
                                                                        Yamaha OEM Tool # YM-1423.
                                                                      • Not required on the 91-92 Honda
                                                                        CR models
                                                                      • Hardened steel with
                                                                        black finish



Fork Cap Wrench
Dual Chamber                                                          Combo Fork Damper Tool
• 12 mm slot for holding the damper rod for removing the rebound
  bolt. This allows for the removal of the cartridge from the lower
                                                                      121-08223
                                                                      •   Designed to hold the damper rod during assembly & disassembly
  fork leg                                                            •   One end features spanner-type prongs and the other a 27mm hex
• Made from billet 6061-T6 and anodized Motion Pro blue               •   Hardened steel with black finish
• Laser engraved markings with Motion Pro logo                        •   Honda: XR-400R 96-04, XR-650R 00-’07
• Original Motion Pro design                                          •   Suzuki: DRZ400 00-’06, DRZ400E ‘00-07

121-08428 50 mm WP
• 50mm, 6 point box wrench for removing the fork cap (cartridge)
  on WP 4860 MXMA dual chamber closed cartridge (WP USD 48
  mm) forks on late-model KTM’s


                                                                      Damping Rod Bleed Tool
                                                                      121-08337
                                                                      • For effortless retrieval of damping rod after spring installation
                                                                      • Perfect for working on Kayaba, Showa and WP inverted forks
                                                                      • Rod is zinc plated with a knurled handle for a sure grip
121-08429 49 mm                                                       • Rod includes covered bleed port to prevent
                                                                        oil splatter
• 49mm, 8 point box wrench for removing the fork cap (cartridge)
  on dual chamber closed cartridge forks on late-model Yamaha’s


                                                                       121-08285           M10 X P1.0 Brass Adaptor
                                                                       121-08346           M12 x P1.0 Brass Adaptor
                                                                       121-08347           M12 X P1.25 Brass Adaptor
                                                                       121-08352           M14 x P1.0 Brass Adaptor
 REV. 06-02-08
                                                                       121-08353           Damping Rod Only
                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                Fax: (626) 792-5341
                                                                                                www.FlandersCo.com
                                                                                                                                            49
                                                             Suspension
     Fork Compression Valve                                                Knuckle Ball Joint
     Removal Tool                                                          Separator
     121-08373                                                             121-08120
     • Replaces Yamaha OEM YM-01500                                        • Will not damage the A-arm, ball-joint stud or rubber boots
     • For removing the compression valve                                  • Complete with instructions
       from cartridge                                                      • Includes 121-08154, also sold separately for earlier versions
     • 19mm drive hex / 36mm octagon                                       • Designed to work on: Honda TRX250R 86-89, TRX250X 87-88/91-
     • Manufactured out of billet                                            92, TRX250 Recon 97-01, TRX300EX 93-01, TRX450R 04-07,
       6061 T-6™ aluminum Applications:                                      TRX450ER 06-07, Yamaha YFZ350 87-01, YFM350X 87-01
     • Yamaha: YZ 125/250 05-06, YZ 250F/450F 06



     Compression Bolt
     Removal Tool
     KTM WP Forks
     121-08436                                                             KTM Heim Joint Tool
     • Fits 2007 and 2008 KTM with
       WP 4860 MXMA CC forks -                                             121-08434
       07-08 SX/F & 08 XC/F                                                • Removes and replaces KTM Heim joints (P/N 50304090044) or
     • For removing and installing the                                       aftermarket equivalents
       compression valve assembly from the fork cap                        • Aligns Heim joint for easy installation
     • Allows you to properly torque the                                   • Built in stop correctly centers Heim joint in swing arm
       compression valve assembly during installation                      • Aligns and installs Heim joint seals
     • 17mm hex head                                                       • Anodized aluminum construction reduces the possibility of
     • Made from billet 6061 T-6™ aluminum                                   damaging your swing arm
     • Anodized finish with laser engraving                                 • Handle includes retention o-ring to hold Heim joint adaptors and
     • Caution: fork cap assembly under pressure! Always wear safety         Heim joint bearing in place
       glasses and refer to the fork manufacturer’s for correct assembly   • Ergonomic handle for a comfortable fit
       and disassembly procedures.                                         • Made from billet 6061-T6 and anodized Motion Pro blue
                                                                           • Laser engraved Motion Pro logo
                                                                           • Original Motion Pro design

     KTM Fork Cap Remover
     121-08290
     • 22mm hex and 3/8 in. square drive.
     • Allows removal and replacement
       of the accessory fork cap
       KTM part# 48600074S
     • Slotted to allow removal and
       replacement of caps
       with 121-11029 Pro Bleeders


                                                                                                                                        REV. 06-02-08



50               (626) 792-7384
              www.FlandersCompany.com
                                                                                                  Fax: (626) 792-5341
                                                                                                  www.FlandersCo.com
                                                      Suspension
Fork Holding Tool                                                     Pro Bleeder
3/8” Drive                                                            • Reduces harshness caused by air build-up
                                                                      • Allows bleeding of air pressure without tools
325-01025                                                             • One of the easiest bolt-on upgrades you can make to your forks
• Holds inner dampening rod while
  removing the bolt from the
  bottom of the fork leg.
                                                                      121-11027 M5x0.8
                                                                      • Set includes two Pro Bleeder valves with adapters, O-rings &
• Fits most KDX, KX, KZ, & Z series models                              instructions (installed height of 7/8 in. or 22mm)
                                                                      • Fits most Kayaba and Showa upside-down
T-Stem Nut Wrench                                                       forks with OE bleeder screws
                                                                      • Fits most late model
• This thin profile combination wrench has an open end wrench on         Japanese off-road motorcycles
  one end for loosening the T-Stem nut on late-model motocross
  bikes and some sportbike applications without removing the
  handlebars                                                          121-11029 M4x0.7
• The other side of the wrench has a spanner wrench that fits the      FOR KTM - M4X0.7 WITH EXTERNAL PRELOAD ADJUSTMENT
  slotted spanner nut used to set steering stem bearing adjustment.   • Kit includes bleeder valves and
  The thin profile of the wrench allows it to be used without            adapters for use on KTM fork caps,
  removing the triple clamps                                            part number 4860.0074S and
121-08232                                                               4860.0075S as well as all WP 43 and
                                                                        48mm fork caps with external spring
• 32 mm open end side fits T-Stem nut on most Honda CR models            preload adjustment (Also identifiable
• 46mm side fits slotted spanner nut on most Honda CR models             by the four holes which require the pin spanner 121-08290 KTM
121-08233                                                               Fork Cap Remover for cap removal
                                                                      • Does not fit on 2007 KTM SX and SXF models. Use 121-11053 for
• 32mm open end side fits T-Stem nut on most Kawasaki KX’s
• 38mm side fits slotted spanner nut on most Kawasaki KX’s               2007 WP 4860 MXMA CC closed cartridge forks.

121-08234                                                             121-11031 M4x0.7
• Fits late model RM up to 2005 (does NOT fit 2006 and later RM)
• 32mm open end side fits T-Stem nut on most Suzuki RM models          FOR KTM - M4X0.7 WITHOUT EXTERNAL PRELOAD ADJUSTMENT
• 42mm side fits slotted spanner nut on most Suzuki RM’s               • Kit includes bleeder valves and
                                                                        adapters for use on KTM fork caps,
121-08235                                                               part number 4860.0020S and
• 30mm open end side fits T-Stem nut on most Yamaha WR & YZ’s            4860.0020S1 as well as all WP 43
• 40mm side fits slotted spanner nut on most Yamaha WR & YZ’s            and 48mm fork caps without external
                                                                        spring preload adjustment.


                                                                      121-11053 M4x0.7
                                                                      WP 4860 MXMA CC
                                                                      FOR KTM- M4X0.7 WITH EXTERNAL PRELOAD ADJUSTMENT
                                                                      • Kit includes bleeder valves and
                                                                        adapters for use on 07-08 KTM
                                                                        SX/SXF/XC/XCF closed cartridge fork
                                                                        caps, part number 48600516S1,
                                                                        4860.0074S and 4860.0075S fork
                                                                        caps with external spring preload
                                                                        adjustment.
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                               Fax: (626) 792-5341
                                                                                               www.FlandersCo.com
                                                                                                                                         51
                                                               Suspension
     Pro Bleeder Fork Kit                                                      Nitrogen Needle Kit
     121-11028                                                                 121-08075
     • Kit is designed for the professional who wants the cleanest             • Nitrogen needle is use to fill shocks with self-sealing rubber
       possible setup                                                            valves (Some Yamaha & Ohlins)
     • Requires drilling, tapping and end milling of the fork caps             • Can be used in conjunction with a nitrogen bottle and regulator or
     • Kit includes two Pro Bleeder valves, 5/16 in. -32 tap, 9/32’’ drill       to our Nitrogen Shock Gauge
       bit, washers and instructions (low-profile installed height of 3/8 in.   • Instructions included
       or 9.5mm)                                                               • Made in the U.S.A.
     • Required 7/16 in. end mill (not included)
                                                                               121-98375
                                                                               Replacement Needle
                                                                                •Not available in all states




     Nitrogen Shock Gauge & Filler
     121-08072                                      ADDITIONAL PARTS:
     • 300 psi capacity
     • Bleeder valve and T-handle plunger pin chuck
                                                    121-08312
     • Swivel chuck has a 12 inch flexible hose                                 Schrader Valve Extension
     • Instructions, carrying box and Schrader valve extension
       included (required on some Showa shocks)
     • Replacement Shrader valve extension is item 121-08132                   121-08413
     • Made in the U.S.A.                                                      6ft. Hose
     • Regulator and transfer hose required to get Nitrogen from tank
       to Nitrogen Shock Gauge and Filler.
     • For regulator and transfer hose set use part number 121-08414           121-08414
       (does not include 121-08072).                                           Regulator & Hose
     • For transfer hose only use part number 121-08413
       (does not include Inert Gas Regulator or 121-08072).
                                                                               289-38906
                                                                               Schrader Valve for Air Release




                                                                                                                                           REV. 06-02-08



52               (626) 792-7384
              www.FlandersCompany.com
                                                                                                      Fax: (626) 792-5341
                                                                                                      www.FlandersCo.com
                                          Safety Wire & Twisters
.032” Safety
Lock Wire
• Stainless steel safety lock wire that
  resists work hardening and meets
  government specifications. 360 ft.
                                                                   528-01032
  roll in unique dispenser that saves
                                                                   360 ft. Roll
  waste and is easier to handle



                     352-02413
                     25 ft. Roll


Safety Wire Twister
401-03819 9”
401-03816 6.75”
Made from alloy steel forgings, these SAFETYTWIST pliers
offer the user rigid construction, tapered jaws, finely finished
cutting edges and a new “long life” twist mechanism. The
induction hardened cutting jaws will cut safety wire up to .060
diameter, or two twisted strands of .041” dia. wire. Tapered
jaws allow easy access into confined areas. Specially finished
jaw faces provide for maximum grip-minimum slip, on the wire
being twisted.

Safety Wire Kits
401-03820
9” Twister w/ 25 ft. wire
401-03817
6.75” Twister w/ 25 ft. wire

Helpful Hints For Twisting Your Wire                               Lockwire should be as short as possible, attached in the most direct
Lockwire should be installed only one at a time. If the wire is    way using the two (2) wire only and installed so the lockwire tends to
removed, for any reason, it should be destroyed. Kinks and sharp   tighten the bolt or nut. The ends of the wire should have a minumum
bends should not be made in lockwire.                              of three (3) turns.
                                                                                                     Three
                                                                                                   (3) turns
                                                                                                   Minimum



                             Three (3) turns Minimum



 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                             Fax: (626) 792-5341
                                                                                             www.FlandersCo.com
                                                                                                                                            53
                                                             Wrenches
     “MP” Metric Tool                                                       “MP” American Tool
      121-08161                                                             121-08173
     • A must-have for on-the-trail repairs or adjustments                  • Designed for roadside adjustments or service on motocycles with SAE
     • Can be used to remove 8, 10, 12 & 14mm bolts, #2 & #3 Phillips         hardware
       screws,small & medium straight-slot screws and 5 & 6mm Allen bolts   • Kit includes Straight-Slot, Phillips, Allen & Torx bits
     • Includes a 1/4 in. & 3/8 in. socket driver                           • Can be used to remove 5/16 in., 7/16 in., 1/2 and 9/16 in. nuts/bolts
     • 10mm & 12mm 1/4 in. drive sockets included                           • 7/16 in. and 1/2 in Drive sockets are also included
     • Enhance it by adding your own 1/4 in. or 3/8 in. drive socket        • Comes complete with a convenient durable nylon carrying case with belt
       attachments
     • Includes convenient carrying case                                    Replacement Parts
     • Hard nickel pewter finish
                                                                            121-08176            1/8 AND 3/16 HEX BIT
     Replacement Parts                                                      121-08177            7/32 AND 9/64 HEX BIT
     121-08162 #2 & #3 Phillips bit                                         121-08178             1/4 HEX AND T40 BIT
     121-08163 5mm & 6mm hex bit
                                                                            121-08179             TORX T25 AND T27 BIT
     121-08164 Straight-slot bit
                                                                            121-08180             SLOT & #2 PHILLIPS




      5/16” Deep Socket
      121-08384
      1/4” Drive 12 Point.
      • Developed specifically to work with all MP Bits
      • Chrome Vanadium Socket
      • Satin Chrome Finish
      • The perfect accessory for Folding Trail T-Handle Set (121-08297)
      • Use with any of our 1/4 inch drivers (121-08158, 121-08359,
        121-08363, 121-08364, 121-08231, 121-08297)

                                                                                                                                       REV. 06-02-08



54                (626) 792-7384
               www.FlandersCompany.com
                                                                                                  Fax: (626) 792-5341
                                                                                                  www.FlandersCo.com
                                                           Wrenches
Metric & Standard
T-Handles
Metric T-Handles                     Standard T-Handles
• Durable nickel pewter finish        • Polished chrome finish
• Deep 6-point sockets               • 12-point sockets
• Includes a vinyl storage pouch     • Includes a vinyl storage pouch
• Lifetime replacement warranty      • Lifetime replacement warranty

121-08113              T-HANDLE SET, 7 PC METRIC                           121-08315            T-HANDLE SET, 8 PC SAE
121-08093              8 MM                                                121-08307            5/16”
121-08094              10 MM                                               121-08308            3/8”
121-08095             12 MM                                                121-08309           7/16”
121-08096             13 MM                                                121-08310           1/2”
121-08097             14 MM                                                121-08311           9/16”
121-08098             17 MM                                                121-08312           5/8”
121-08099             19 MM                                                121-08313           11/16”
                                                                           121-08314           3/4”

                                                                           T-Handle Drivers
                                                                           • Use any 1/4 in. or 3/8 in. drive attachments such as sockets, hex
                                                                             drives, crows foot or swivels
                                                                           • Chrome-vanadium tool steel shafts
                                                                           • Durable nickel pewter finish
                                                                           • Lifetime replacement warranty
                                                                           121-08158 1/4 in. - 8.5” Long
                                                                           121-08159 3/8 in. - 10.5” Long
Dual Drive Mini T-Handles
• Use T-Handle drive to tighten/loosen fasteners and shaft drive for
  quick installation/removal of fasteners
• 1/4 in. drive has a compact 6 1/2 in. drive shaft length
• For tight access and easy transport
• Use with 1/4 in. drive sockets, hex drives, crow’s foot, swivels, etc.
• Chrome-vanadium tool steel shaft and T-Handle
• Durable nickel pewter finish
• Lifetime replacement warranty
121-08359 1/4 in. - 6.5” Long
121-08360 3/8 in. - 7.75” Long
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                                    Fax: (626) 792-5341
                                                                                                    www.FlandersCo.com
                                                                                                                                                 55
                                                             Wrenches

     Racer T-Handle Set
     121-08145
     • Includes the most popular size T-Handles
     • 8mm, 10mm, 12mm, and 14mm T-handle sockets
     • No. 2 and no. 3 T-handle Phillips screwdrivers
     • Durable nickel pewter finish
     • Includes a vinyl storage pouch
     • Lifetime replacement warranty on T-Handle sockets
     • One year warranty on the T-Handle screwdrivers

                                                                             T-Handle Phillips
                                                                             Screwdrivers
                                                                             • Chrome-vanadium tool steel shafts
                                                                             • Carbon-steel T-Handle
                                                                             • Durable hard nickel pewter finish
                                                                             • Sold each or in a set
                                                                             • Standard one year warranty
                                                                             121-08146          Set of 3 - Phillips #1, #2, #3
                                                                             121-08101          Phillips #1
                                                                             121-08102          Phillips #2
                                                                             121-08103          Phillips #3

     Ball End Allen T-Handles
     • Use T-Handle hex to tighten/loosen fasteners and ball-end hex on
       shaft for quick installation/removal of fasteners
     • Ball end allows for better access to hard to reach Allen-head bolts
       (up to 25-degree working angle)
     • Compact 6 3/4” shaft lengths for tight spaces and easy transport
     • Chrome-vanadium tool steel shaft and T-Handle
     • Durable nickel pewter finish
     • Lifetime replacement warranty
     121-08383           Set of 4 - Incl. 4, 5, 6, 8mm
     121-08374           4mm
     121-08375           5mm
     121-08376           6mm
     121-08377           8mm


                                                                                                                          REV. 06-02-08



56               (626) 792-7384
              www.FlandersCompany.com
                                                                                                   Fax: (626) 792-5341
                                                                                                   www.FlandersCo.com
                                                         Wrenches
Mini-Pro T-Handles                                                      121-08401           6mm        Mini-Pro Handle
•    Compact size for easy access and transport                         121-08128           8mm        Mini-Pro Handle
•    6 3/4 in. shaft length                                             121-08129          10mm        Mini-Pro Handle
•
•
     Chrome-vanadium tool steel shaft
     Durable nickel pewter finish
                                                                        121-08130          12mm        Mini-Pro Handle
•    Includes a vinyl storage pouch                                     121-08317          13mm        Mini-Pro Handle
•    Lifetime replacement warranty                                      121-08338          14mm        Mini-Pro Handle
121-08340                                             121-08320                                          121-08131
Five piece set includes                               Three piece set includes                           Three piece set includes
8, 10, 12, 13, and 14 mm sizes                        8, 10, 13 mm sizes                                 8, 10, 12 mm sizes




Tri Drive Mini T-Handle Kit
121-08389
• Use T-Handle drive to tighten/loosen fasteners and shaft drive for
  quick installation/removal of fasteners
• 1/4” drive has a compact 6” drive shaft length
• Compact size for use in tight spaces and is easy to carry
• Includes 8mm, 10mm, 12mm and 13mm sockets
• Use with 1/4” drive sockets, hex drives, crow’s foot, swivels, etc.
• Chrome-vanadium tool steel shaft and T-Handle
• Durable nickel pewter finish
• Lifetime replacement warranty


                                                                        T-Handle Ratchets
                                                                        • Chrome-vanadium tool steel
                                                                        • Compact design allows for use in confined spaces
                                                                        • Reversible ratchet
                                                                        • Comfortable grip
                                                                        • Patented design
                                                                        • Lifetime replacement warranty


                                                                        121-08231 1/4 in. Drive
                                                                        121-08226 3/8 in. Drive
    REV. 06-02-08


                       (626) 792-7384
                    www.FlandersCompany.com
                                                                                               Fax: (626) 792-5341
                                                                                               www.FlandersCo.com
                                                                                                                                    57
                                                         Wrenches
     Bits for 5/16” T-Handle
     • Durable nickel pewter finish
     • Rubber O-ring keep bits securely in place
     • Requires 121-08384 1/4 inch drive
       5/16 deep socket (not included)

     121-08162     #2 and #3 PHILLIPS BIT
     121-08163     M5 AND M6 HEX BIT
     121-08164     STRAIGHT SLOT BIT
     121-08176     1/8 AND 3/16 HEX BIT
     121-08177     7/32 AND 9/64 HEX BIT
     121-08178     1/4 HEX AND T40 BIT
     121-08179     TORX T25 AND T27 BIT
     121-08180     STRAIGHT SLOT & #2 PHILLIPS
     121-08382     3mm x 4mm HEX BIT
     121-08342     2 PIECE BIT SET, #2 & #3 PHILLIPS AND 4.6 & 5.6 STRAIGHT
     121-08343     3 PIECE BIT SET, #2 & #3 PHILLIPS, 4.6 & 5.6 STRAIGHT, M5 & M6 HEX
     121-08344     5 PIECE DRIVE BIT SET
     121-08345     7 PIECE DRIVE BIT SET


                                                                        Folding Trail T-Handle Set
                                                                        121-08297
                                                                        • Honorable mention in Dirt Rider Magazine December 2004
                                                                        • Compact 1/4 in. drive folding T-Handle is perfect for all tool packs
                                                                        • This unique T-handle set includes 8,10,12 and 13mm
                                                                          six-point sockets
                                                                        • Includes a nylon carrying case with internal pockets to hold your
                                                                          folding T-Handle, sockets and additional accessories
                                                                        • Customize your T-Handle set with your own 1/4 in. accessories
                                                                        • Features a durable hard nickel pewter finish
                                                                        • Standard one year warranty


     1/4” Drive 12 Point                                                6mm 1/4” Drive 6
     5/16” Deep Socket                                                  Point Socket
     121-08384                                                          121-08408
     • Works with all 5/16 Bits (see above)                             • For bolts commonly found on
     • Works with Folding Trail Set (see above)                           KTM and hose clamps found on
     • Works with any 1/4” Drive                                          most brand motorcycles
                                                                        • Made from chrome vanadium
                                                                          tool steel
                                                                        • Satin chrome finish
                                                                        • Perfect addition for any tool pack


                                                                                                                                      REV. 06-02-08



58               (626) 792-7384
              www.FlandersCompany.com
                                                                                                Fax: (626) 792-5341
                                                                                                www.FlandersCo.com
                                                         Wrenches
11 Slot T-Handle Rack                                         Wall Bracket for T-Handle
121-08114                                                     Rack 121-08435
                                                              • For mounting T-Handle Rack to the side of a toolbox, wall, etc.
• Easily hangs on the side of most tool boxes                 • Features a quick release pin for removing and attaching the rack
• Keeps T-Handles accessible and ready for action             • Includes built in bottle opener
                                                              • Made from heavy-duty 12 gauge zinc plated steel
                                                              • Wall Bracket works only with 121-08114




Hex & Star Pro Wrench Sets Dual Drive L-Handles
• 180 degree swivel head with extra long handle               • Impact resistant ergonomic molded handle reduces hand fatigue
  for accessing hard to reach places                          • Use drive side to tighten/loosen fasteners and shaft side for quick
• Pivot design allows for easy rotation around obstructions     installation/removal of fasteners
• Pivot design allows you to keep the wrench and fastener     • Use with 1/4” & 3/8” drive sockets, hex drives, crow’s foot, swivels, etc.
  engaged when access is limited                              • One piece chrome-vanadium tool steel shafts
• Heat treated alloy tool steel w/ Chrome plated finish        • Durable nickel pewter finish
• Includes heavy duty folding canvas storage pouch            • Lifetime replacement warranty

121-08420
• Hex Pro Metric Pivot Head Hex Wrench Set, 6 pc
• Includes 3, 4, 5, 6, 8, and 10 mm wrenches




                                                                               121-08361
121-08419                                                                      • 3/8” L-Handle 10” long
• Hex Pro SAE Pivot Head Hex Wrench Set, 5 pc
• Includes 3/16, 7/32, 1/4,
  5/16, and 3/8” wrenches                                                      121-08362
                                                                               • 3/8” L-Handle 7.5” long


121-08421                                                                      121-08363
• Star Pro, Pivot Head Star Wrench Set, 6 pc                                   • 1/4” L-Handle 10” long
• Includes T-25, T-27, T-30,
  T-40, T-45, and
  T-50 wrenches
                                                                               121-08364
                                                                               • 1/4” L-Handle 7.5” long
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                          Fax: (626) 792-5341
                                                                                          www.FlandersCo.com
                                                                                                                                             59
                                                              Wrenches
     T-Handle Wrenches                                                    Hex Wrenches
     401-03852                                                            Metric
     • Phillips #2                                                        911-00015   1.5mm
     401-03853                                                            911-00020   2.0mm
                                                                          911-00025   2.5mm
     • Phillips #3
                                                                          911-00030   3.0mm
                                                                          911-00040   4.0mm
                                                                          911-00050   5.0mm
                                                                          911-00060   6.0mm
     T-Handle Wrenches                                                    911-00080   8.0mm
     401-03860                                                            911-00100   10.0mm
     • 8 mm Socket                                                        911-00120   12.0mm
                                                                          911-00140   14.0mm
     401-03861                                                            911-00170   17.0mm
     • 10 mm Socket                                                       911-00190   19.0mm
     401-03862
     • 12 mm Socket                                                       American
     401-03863                                                            911-00245   5/64”
     • 14 mm Socket                                                       911-00246   3/32”
                                                                          911-00248   1/8”
                                                                          911-00250   5/32”
                                                                          911-00254   7/32”


     Ball End Allen Set 9 Piece
     121-08185
     • Made of chrome-vanadium tool steel
     • Sizes included 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10 mm
     • Ball end allows for better access to allen-head bolts (up to 25-
       degree working angle)
     • Convenient holder included




                                                                                                              REV. 06-02-08



60               (626) 792-7384
              www.FlandersCompany.com
                                                                                        Fax: (626) 792-5341
                                                                                        www.FlandersCo.com
                                           Specialty Tools
Jumper Cables                                     Impact Driver
401-96306                                         401-03800
• 6 ft. 10 Gauge                                  Loosens frozen bolts easily, or tightens them securely.
• Insulated, Color Coded Clamps                   Complete with 5/16” hex adaptor, 4 bits, & metal storage case.
                                                  3/8” Square Drive.                                   Made in Taiwan




Battery Charger                                   Magnetic Parts Dish
401-15650                                         121-08156
• 6V - 12V Battery Charger                        • All-purpose magnetic dish is ideal for keeping track of loose
• Half Amp Charge Rate                              fasteners and other small parts
                                                  • Attaches magnetically to any steel surface
                                                  • Measures 5” in diameter and is 1” deep
Replacement Pigtails 401-15651




Battery Acid Catch Tank                           Belt Tension Gauge
121-11007                                         121-08350
• Prevents battery acid overflow                   • Compact design
  onto chrome or painted surfaces                 • Scale for easy reference
  while still providing proper venting            • Designed to work with all belt drive models with a 10 lb.
• May be mounted anywhere near                     specification
  battery, along frame rail
• High-impact plastic tank
  3/4 in. dia. x 4 in. length
• Includes cable ties
  and tubing


 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                            Fax: (626) 792-5341
                                                                            www.FlandersCo.com
                                                                                                                        61
                                                          Specialty Tools
     Grip End Cutter                                                      Cable Soldering
     121-08335                                                            Equipment
     • Clean cut every time
     • Durable steel construction                                         615-99999 Solder Pot Kit
     • Perfect for installing hand guards                                 • Includes Solder Pot 615-01200, Flux 615-03001, & Solder 616-01500
     • Kit includes 6 in. extension, 1 in. cutter and 7/8 in. cutter      615-01200 Solder Pot
                                                                          • 120 Volt, 200 Watt, 11 9/16” diam., 1 1/2” deep
                                                                          • Quick heat-up
                                                                          • Three wire cord
                                                                          • Made in USA




     Cable Luber                                                          615-01222 Solder Pot
     401-81190                                                            • 220/240 Volt, 11 9/16” diam., 1 1/2” deep
     • Used to inject lubricant                                           • Quick heat-up
      into cable housing
     • Clamps over housing and                                            615-07000 Thermocape
      wire allowing an aerosol                                            • Reduces heat-up time
      can to be connected                                                 • Increases solder temp
     • Once lube runs out the far end,                                      for deeper penetration
      the cable is lubricated



     Swing Arm Bearing Tool 615-08000 Replcmt Element
                            • 120 Volt Heat Element

     121-08213              615-08022 Replcmt Element
     • Designed for installation of the swingarm bearings on late-model   • 220/240 Volt Heat Element
       Japanese motorcycles
     • Puller draws bearing into the swingarm
                                                                          615-01250 Replacement Cord
                                                                          • Three wire cord
     • Includes three drivers for use with common bearing sizes
     • Kits includes driver sizes I.D. 20mm / O.D 26mm, I.D. 21mm /
       O.D. 26mm and I.D. 22mm / O.D.27mm                                 616-01500 Solder
                                                                          • 1 1/2 lb. Bar




                                                                          615-03001 Flux
                                                                          • 3 oz. Bottle

                                                                                                                                        REV. 06-02-08



62               (626) 792-7384
              www.FlandersCompany.com
                                                                                                     Fax: (626) 792-5341
                                                                                                     www.FlandersCo.com
                                                             Pliers
Master Link Pliers                                                  Master Cylinder Snap
121-08230                                                           Ring Pliers
 • Designed to simplify installation and removal of clip-           121-08279
   type master links                                                • Allows removal of internal snap rings used in
 • One tip is shorter and notched to be placed on the                 hydraulic master cylinders
   pin which allows the longer end to push the clip                 • Replaces Honda# 07914-SA50001
                                                                    • Can be used to remove and replace small to medium internal snap
                                                                      rings up to 50mm deep, including those used for transmission
                                                                      gear locating, bearing retention, and oil seal retention
                                                                    • Applicable to some fork seal retaining rings damage
                                                                      during removal




Snap Ring Pliers
121-08186
• Economical pliers that easily work with both inside and outside
 opening snap rings or clips
• Includes 3 extra sets of tips, 1 additional straight tip and
 2 offset angled tips




Safety Wire Twister
401-03819 9”
401-03816 6.75”
Made from alloy steel forgings, these SAFETYTWIST pliers
offer the user rigid construction, tapered jaws, finely finished
cutting edges and a new “long life” twist mechanism. The
induction hardened cutting jaws will cut safety wire up to .060
diameter, or two twisted strands of .041” dia. wire. Tapered
jaws allow easy access into confined areas. Specially finished
jaw faces provide for maximum grip-minimum slip, on the wire
being twisted.
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                                                                                                                        63
                                                                Brakes

     Wing Nut Sockets                                                   Master Cylinder Snap
     121-08224                                                          Ring Pliers
     • Set of 2 includes large & small 3/8 in. drive                    121-08279
     • Designed to remove over-tightened or stuck wing nuts             • Allows removal of internal snap rings used in
     • Ideal for use on brake cables & rods                               hydraulic master cylinders
     • Can be used with air tools                                       • Replaces Honda# 07914-SA50001
     • Makes removing wing nuts easier and may save them from           • Can be used to remove and replace small to medium internal snap
       damage during removal                                              rings up to 50mm deep, including those used for transmission
                                                                          gear locating, bearing retention, and oil seal retention
                                                                        • Applicable to some fork seal retaining rings damage
                                                                          during removal




                                                                        Snap Ring Pliers
                                                                        121-08186
     DIY Brake and Clutch                                               • Economical pliers that easily work with both inside and outside
                                                                         opening snap rings or clips
     Bleeder 121-08316                                                  • Includes 3 extra sets of tips,
                                                                         1 additional straight tip and
     • Handle and body are made of high-strength Zytel                   2 offset angled tips
       (glass-reinforced nylon)
     • 10 ml. of fluid per injection stroke
     • RFI technology
     • Ergonomic design is compact and comfortable to use
     • Affordable to the individual technician or enthusiast
     • Includes adapters to fit most brake systems and brake fluid cans
     • Compatible with all brake fluids
     • Main body colors may vary
                                                                        Hydraulic Brake Bleeder
                                                                        121-08143
                                                                         • Make bleeding your brakes a one-person job.
                                                                         • Instructions included
                                                                         • Will not bleed air from a dry system
                                                                         • Made in the U.S.A.




                                                                                                                                    REV. 06-02-08



64              (626) 792-7384
             www.FlandersCompany.com
                                                                                               Fax: (626) 792-5341
                                                                                               www.FlandersCo.com
                                Tire & Wheel Tools & Supplies
Coats 220 Tire Changer
551-00220
   The COATS 220 is a simple to operate manual tire
changer designed to handle all types of wheels
from 8” to 23” and up to 8” wide. Designed to
change Motorcycle and ATV wheels, it also works
with trailers, golf carts, lawn and garden tractors
and small automotive wheels. Unlike changing
tires by hand, you can change tires much faster
and easier with less risk of damage to expensive
wheels. Designed & built in the USA to provide years of service.

• VERSATILE: Handles all spoked or cast motorcycle wheels from 14” to
  23” diameter, with one set of rim clamps. A second set of rim clamps
  services a wide variety of wheels from 8” to 17.5” diameter—such as
  ATV’s, automotive, etc. Works with both tubeless and tube-type tires.
• FAST: Specially designed outside rim clamping assures positive
  hold down—no need to remove brake discs or sprockets. A single
  heavy-duty forged steel combo tool is used for tire mounting and
  demounting.
• SIMPLE: Wheel is located at a convenient working height and is easily
  accessible. Overhead arm assembly pivots out of the way when not
  needed for use with the combo tool.
• WHEEL PROTECTION: Replaceable plastic protectors on mount/
  demount combo tool and replaceable plastic clamp pads on the three
  rim clamps helps prevent scratching or denting of wheels.
• BUILT-IN BEAD BREAKER: Sturdy mechanical leverage allows quick
  and easy loosening of even the most stubborn motorcycle beads. (For
  tough ATV beads, we recommend the MC135 ATV Bead Breaker.)




 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                          Fax: (626) 792-5341
                                                                          www.FlandersCo.com
                                                                                                65
                                 Tire & Wheel Tools & Supplies

     Replacement Parts for Coats 220 Tire Changer
     551-07043         13- Rim clamp adjustment screw
     551-01181         14 - Roll pin for clamp screw
     551-01017         15 - Roll pin for screw handle
     551-07090         16 - Handle for clamp screw
     551-07091         17 - Grip for handle
     551-01253         18 - Bushing for screw
     551-07560         21 - Slotted nut for clamp
     551-07559         22 - Adjustable rim clamp motorcycle
     551-07158         23 - Stationary rim clamp motorcyle
     551-07034         24 - Table top
     551-07562         25 - Adjustable rim clamp ATC
     551-07049         26 - Stationary rim clamp ATC
     551-07063         27 - Vertical pivot tube
     551-07064         29 - Locking knob
     551-06259         35 - Lube bottle
     551-00491         37 - Lube applicator
     551-07423         39 - Tire iron protectors (pair)
     551-08519              Long Protector (only)
     551-08520              Short Protector (only)
     551-07156         40 - Big tire iron
     551-07424         41 - Rim clamp protectors (6)
     551-08360         ATV bead breaker kit with longer arm for
                       more leverage and smaller shoe to fit small
                       wheels.


                                          Other accessories for the Coats Rim Tire Changer

                       A                  Part #             Description
                                          B) 551-81329       Bench Adaptor
                                          A) 551-08028       Tire Spreader

                           B




     Camel Stuff Tire Mounting Lubricant
     289-12095
     • 8 pound pail.
     • Makes tire mounting and dismounting easier.
     • Stops rubber squeaks.
     • Contains rust inhibitor.
     • Makes 5 gallons of lubricant when mixed with water.




     RC 100 Plastic Clamp                                            RC 100 Plastic Boot
     551-83248                                                       551-83374


                                                                                                   REV. 06-02-08



66             (626) 792-7384
            www.FlandersCompany.com
                                                                             Fax: (626) 792-5341
                                                                             www.FlandersCo.com
                               Tire & Wheel Tools & Supplies
Wheel Truing, Balancing
Stand & Accessories
560-90004             Wheel Truing & Balancing Stand.
                      Includes bearings at top of stand which roll
                      with much less resistance than
                      wheel bearings (no seal drag)
560-90003             Wheel Truing Stand Only.
                      Does not include bearings shown at
                      top of stand (see below)
560-90010             Bearing kit to convert truing stand
                      into balancing stand
560-90304             Replacement wheel center for truing stand.




                                                                      Super 6 Spoke Wrench
                                                                      560-90002
                                                                      Six of the most popular sizes all on one wrench. Extra thick
                                                                      for a longer bearing on the nipple flats than other wrenches.
                                                                      Avoids “Round Off” of nipples.




Spoke Wrenches
• Chrome-vanadium tool steel with a hard nickel pewter finish
• Square-end openings which grip the spoke nipple on all four sides
• Offset slotted ends make it easy and quick to use



121-08133 6mm & 6.3mm
121-08157 6.5mm & 6.8mm
121-08296 5mm & 7mm


REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                                                                                                                     67
               Tire & Wheel Tools & Supplies
     Clip-On Wheel Weights
                                                                                CLIP-ON WHEEL WEIGHTS
                                                      362-16011                     SOLD IN PACKS OF FIVE
                        362-16001                     362-16012      PART #          GRAMS      MAKE       O.E.M. NO.
                        362-16002                     *362-16013    362-16001           10g    HONDA      42705-MJ0-000
                        *362-16003
                                                                    362-16002           20g    HONDA      42706-MJ0-000
                                                                    362-16003           30g    HONDA      42707-MJ0-000
                                                                    362-16011           10g    HONDA      42705-MB0-000
                                                                                              KAWASAKI 41075-1011/1004
                                                                    362-16012           20g    HONDA      42706-MB0-000
                                                                                              KAWASAKI 41075-1012/1005
                                                                    362-16013           30g    HONDA      42707-MB0-000
                      362-16101                                                               KAWASAKI 41075-1013/1006
                      362-16102                      362-16311       362-16101          10g   KAWASAKI 41075-1051/1014
                      *362-16103                     362-16312       362-16102          20g   KAWASAKI 41075-1052/1015
                                                     *362-16313      362-16103          30g   KAWASAKI 41075-1053/1016
                                                                     362-16301
                                                                     362-16201          10g    YAMAHA
                                                                                               SUZUKI      29L-25398-00
                                                                                                            55411-45100
                                                                     362-16302          20g    SUZUKI
                                                                                               YAMAHA      55411-00A00
                                                                                                           29L-25398-10
                                                                     362-16202
                                                                     362-16303          20g
                                                                                        30g    SUZUKI
                                                                                               YAMAHA       55412-46100
                                                                                                           29L-25398-20
                                                                     362-16311          10g    SUZUKI
                                                                                               YAMAHA      55412-00A00
                                                                                                           1A1-25399-00
                                                                     362-16203
                                                                     362-16312          30g
                                                                                        20g    SUZUKI
                                                                                               YAMAHA       55413-46100
                                                                                                           1A1-25398-01
                                                                     362-16313          30g    SUZUKI
                                                                                               YAMAHA      55413-00A00
                                                                                                           2M0-25399-00
                                                     362-16401       362-16301          10g    YAMAHA      29L-25398-00
                                                     362-16402       362-16401          10g     SPOKE       UNIVERSAL
                    362-16301                                        362-16302          20g    YAMAHA      29L-25398-10
                    362-16302                        *362-16403      362-16402          20g     SPOKE       UNIVERSAL
                                                                     362-16303
                                                                     362-16403          30g
                                                                                        30g    YAMAHA
                                                                                                SPOKE      29L-25398-20
                                                                                                            UNIVERSAL
                    *362-16303
                                                                     362-16311          10g    YAMAHA      1A1-25399-00
                                                                     362-16312          20g    YAMAHA      1A1-25398-01
                                                                   * - this part
                                                                     362-16313     no. shown YAMAHA
                                                                                        30g                2M0-25399-00
                                                                     362-16401          10g    SPOKE        UNIVERSAL
                                                                     362-16402          20g    SPOKE        UNIVERSAL
                                                                     362-16403          30g    SPOKE        UNIVERSAL
     Adhesive Wheel Weights
     121-08064
     • Adhesive-backed wheel weights
     • 1/4 oz. segments
     • Box of 30 strips - 360 Segments total
     • Strip 1/2” x 6” Long, scored every 1/2”
     • Adhesive will work on spoked or cast wheels
     • Ideal size for motorcycle use
     • Made in the U.S.A.                                                     121-08046
                                                                              Card contains 6 strips of 12 1/4oz. segments
                                                                              (72 segments total)


     Standard Tape-A-Weights
     560-90013
     • Adhesive-backed wheel weights
     • 1/2 oz. segments
     • Box of 15 strips - 180 Segments total
     • Strip 3/8” x 12” Long
     • Adhesive will work on spoked or cast wheels
     • Made in the U.S.A.
                                                                                                                         REV. 06-02-08



68             (626) 792-7384
            www.FlandersCompany.com
                                                                                         Fax: (626) 792-5341
                                                                                         www.FlandersCo.com
                                Tire & Wheel Tools & Supplies
Tire Repair Tools & Accessories
Valve Core Remover        Angle Valve Stem
121-08183                 403-00945
• Allows for easy removal and installation of standard valve cores
                                                                     • Fits .453” or .625” rim holes
 in tubed or tubeless valve stems (Schrader valve)
• Perfect tool pack accessory




Plug-N-Patch
• Made for all tires, including steel belted radial.
                                                                     Tubeless Snap-In
• Fills the puncture. Seals the injury.
• Chemically vulcanizing.                                            Tire Valves
                                                                     Conventional snap-in tire valves complete with valve core
• In some cases, no need to remove tire.
• Sold Each                                                          and black plastic dust cap. They are manufactured to original
                                                                     equipment standards. The rubber used for these valves is re-
                                                                     sistant to ozone damage. IMPORTANT: Tires with snap-in
289-15290             Sm. Reinforced. Up to 1/8” Puncture            valves should not exceed a cold inflation pressure of 60
                      For Box: Order 15.                             P.S.I. Do not use in rims that exceed .156” in thickness.
289-15291             Med. Reinforced. 1/8” to 1/4” Puncture.
                      For Box: Order 10.
                                                                     289-30415 1-1/4” Valves for .625” dia. Rim Holes
                                                                     289-30412 7/8” Valves for .453” dia. Rim Holes
                                                                     289-30413 1-1/4” Valves for .453” dia. Rim Holes




Motorcycle Engine
Tire Pump 401-97600
Fits 10, 12,14 & 18mm spark plug
                                                                                               289-30412
holes. Special valving & air intake
parts ensure clean outside air
pumped into tire.
Kit contains 42” hose,
pump & adaptors.


                                                                         289-30415                                 289-30413
 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                             Fax: (626) 792-5341
                                                                                             www.FlandersCo.com
                                                                                                                                     69
                                     Tire & Wheel Tools & Supplies
     Bead Buddy™                                                             Hex Axle Tools
     No more fighting to keep the bead down while installing                  • Fits internal hex on many late model sportbike axles
      or repairing your off-road tires                                         and some dirt bikes
                                                                             • Four metric hex sizes: 17, 19, 22 and 24mm
     121-08187 Off-Road                                                      • Made in USA
     • A must for installing Bib Mousse tubes                                • Buell: XB9R, XB9S, XB12R, XB12S (2003-2004)
     • Used to push the tire bead down into the drop center of the rim on    • Honda: CBR600RR, CBR1000RR
       off-road wheels while using tire tools to change tires                • Kawasaki: ZX6R, ZX6RR, ZX600E/K, ZX7R, ZX9R, Z1000
     • Hooks over spoke and pushes bead down on opposite side of tire        • Suzuki: GSXR 2000-2004, DL 1000 V-Strom (all), SV1000
       from tire irons                                                       • Yamaha: R1, R6


                                                                             121-08355 T-6™ Superlight
                                                                             • Made from billet 7075 T-6™ aluminum
                                                                             • Weighs only 2.5 oz.
                                                                             • 3/8 in. square drive on both ends
                                                                               (rated for maximum 90 ft lbs torque)
                                                                             • For touring and trail side use only.

     121-08365 Supermoto
     • For use on 17” x 3 1/2” to 5” wheel widths
     • Used to push the tire bead down into the drop center of the rim on
       supermoto wheels while using tire tools to change tires
     • Hooks over spoke and pushes bead down on opposite side of tire
       from tire irons




                                                                             121-08397 Chrome-Moly
                                                                             • Heavy duty heat treated 4130 Chrome Moly construction.
                                                                             • 3/8 in. square drive on both ends
                                                                               (rated for maximum 150 ft lbs torque)
     121-08388 T-6™ Trail                                                    • Recommended for shop or home use
     • Assists in pushing the tire bead down in the drop center of the rim
       during tire changes
     • Machined from tough 6000 series aluminum
     • Light weight and compact enough for any tool pack
     • Delrin securing thumb screw keeps rims scar free
     • NOT recommended for users of Bib Mousse type off-road tubes




                                                                                                                                        REV. 06-02-08



70               (626) 792-7384
              www.FlandersCompany.com
                                                                                                   Fax: (626) 792-5341
                                                                                                   www.FlandersCo.com
                                     Tire & Wheel Tools & Supplies
                                     Tire Repair Tools & Accessories
Professional Tire
Pressure Gauges
•    High quality liquid filled 2.5 in. dial gauge with protective rubber boot
•    Accurate to plus/minus 1.5 percent of maximum gauge reading
•    Blue anodized 6061 T-6 body with pressure relief valve
•    High pressure hose with dual swivels and brass ball type air chuck

121-08258              2.5” 0-30 psi - MX & Off-Road
121-08259              2.5” 0-15 psi - ATV
121-08402              2.5” 0-60 psi - Street
121-08432              Glycerin Refill


                                                                                Motion Pro Bead Popper
                                                                                121-08439
                                                                                • Designed for breaking the bead on road & off-road motorcycle tires
                                                                                • Compact and lightweight (only 3.7 oz)
                                                                                • Can be used with the wheel on or off the motorcycle
                                                                                • Will not scratch the wheel
                                                                                • Made of a durable, high-impact plastic
                                                                                • Not for use on ATV tires
                                                                                • Made in the U.S.A.


Wheel Bearing Remover 8 Piece Metric Set
121-08269
• 8 piece metric set includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and 25mm removers
• Dependable split collet design
• Metric sizes to allow use with metric applications
• Also available as individual components


Replacement Parts
121-08260 Large Driver Rod
121-08261 Small Driver Rod
121-08262 10mm Remover
121-08263 12mm Remover
121-08264 15mm Remover
121-08268 17mm Remover
121-08266 20mm Remover
121-08267 25mm Remover
    REV. 06-02-08


                       (626) 792-7384
                    www.FlandersCompany.com
                                                                                                         Fax: (626) 792-5341
                                                                                                         www.FlandersCo.com
                                                                                                                                                       71
                                   Tire & Wheel Tools & Supplies
                                                         121-08049 Assortment Tire Irons
                                                         • Skin-packed kit includes Motion Pro 8.5”,
                                                         11” & 16” tire irons




                                                         16” Steel Tire Tool
                                                         121-08007
                                                         • Black-finished hardened alloy steel
     8.5” Steel Tire Irons                               • Double compound curved tire tool
                                                         • Sold each
     121-08003 Sold each
     121-08004 Card of 10

     11.5” Steel Tire Irons
     121-08005 Sold each
                                                         Spoon Tire Iron
                                                          • Hard nickel pewter finish
     Enduro Pro Tire Irons                                • 10” long & weighs 4.2 oz.
                                                          • Curved end fits securely in the hand
     121-08051
     • Hot-forged chrome-vanadium tool steel
     • Designed for the professional I.S.D.E. rider      121-08115
     • 8.5” long, 4.5oz. with a slender curve             Sold Each
     • Sold as pair with a custom vinyl carrying pouch
                                                         121-08409
                                                         Set of 2




                                                                                                       REV. 06-02-08



72             (626) 792-7384
            www.FlandersCompany.com
                                                                             Fax: (626) 792-5341
                                                                             www.FlandersCo.com
                              Tire & Wheel Tools & Supplies
                                                       Tire Irons
16” Tire Iron - Straight
401-27916


Rim Protectors
401-26090
• Protects your wheel from scratches and dings caused by tire changing tools
• Retrieval cords are included for easy use


Extended Rim Lock Nuts
121-11022
• Nut is made from 6061-T6 aluminum
• 12mm hex head (8mm X 1.25)
• Extra length makes removal and installation quick and easy
• Includes beveled washers to protect rims
• Gold anodized finish
• Set of 2


Rim Locks




       RIM LOCKS           EMGO STEEL              EMGO ALUMINUM               MOTION PRO ALUM.
        RIM SIZE                                                                                             TIRE SIZE
          1.6”              401-26000                 401-26050                   121-11009               250-300 WM-1
         1.85”              401-26010                 401-26060                   121-11010               325-350 WM-2
         2.15”              401-26020                 401-26070                   121-11011               400-450 WM-3
         2.50”                                                                    121-11017               500 + WM-4
         2.75”              401-26030                 401-26080                                           500 + WM-4

 REV. 06-02-08


                    (626) 792-7384
                 www.FlandersCompany.com
                                                                                              Fax: (626) 792-5341
                                                                                              www.FlandersCo.com
                                                                                                                         73
                                                              Tire Tools
     ATV Axle Wrench Set                                              Honda MX & ATC
     121-08155 Yamaha 50mm                                            Shock Wrench
     121-08237 Honda 41mm                                             121-08029
     121-08238 Kaw/Suz 46mm                                           • Heat-treated alloy steel
     • Sold as a set                                                  • Fits Honda MX models and ATC 200/250R/350X
     •121-08155 is relieved for use on the innermost nut during the
       torque process (cut-out allows it to pass over the jam nut)
     • Made from heat-treated steel
     • Includes a 1/2 in. drive slot for use with a
       torque wrench or breaker bar




     121-08155
                                                                      Honda ATC Axle Wrench
                                                                      121-08028
                                                                      • Heat-treated steel
                                                                      • 27mm hex on one end and a 42mm hex on the other
                                                                      • Fits most Honda ATC models




                                             121-08237




     121-08238




                                                                                                                          REV. 06-02-08



74              (626) 792-7384
             www.FlandersCompany.com
                                                                                         Fax: (626) 792-5341
                                                                                         www.FlandersCo.com
                                                             Tire Tools
T-6 Combo Levers™
• Tire spoon/axle nut hex wrench
• Lightweight forged 7075 T-6™ aluminum
• Hard anodized finish
• Under 10 inches in length and weigh only 3.5 oz.
• Hex wrench sizes fit most popular motorcycle axle nuts
• Perfect fit for Motion Pro T6™ Tool Pack
• Sizes: 22mm, 24mm, 27mm, 32mm and 12/13mm for
  rim lock nuts (sold separately)
• Hex ends are rated for a maximum torque of 90 ft-lbs.
• Not recommended for use with Bib Mousse tubes or tire balls

121-08284                         12/13 mm
121-08286                         22mm
121-08287                         24mm
121-08288                         27mm                                      The “Lip” on 121-08284 (only)
                                                                            is designed to push the tube
                                                                                                            The hex end on 121-08284
                                                                                                            (only), designed to work with
121-08289                         32mm                                      into the tire to prevent
                                                                            tube pinching.
                                                                                                            rim lock nuts, is stepped for
                                                                                                            12mm & 13mm.



3/8” Drive Adapters for T-6 Combo Lever™
•    Allows your T-6 Combo Lever™ to be used as a 3/8 in. driver
•    3/8 in. drive male and 1/4 in. drive female for use with sockets for smaller front axles
•    Lightweight billet 7075 T-6™ aluminum with chrome vanadium steel insert
•    Lightening holes
•    Coin knurled to facilitate turning sockets by hand
•    3/8 in. square drive is rated for a maximum torque of 90 ft-lbs.

121-08326 24mm
121-08327 27mm
121-08370 32mm

22mm 3/8” Drive Short Socket
121-08387
• Super Short (23mm high) to reduce weight
• 6 point chrome vanadium socket
• Satin Chrome Finish
• Designed for use with T-6 Combo Lever™ 3/8” Drive Adapters above
• Specifically designed to remove the front axle nut on the following applications because the lower fork leg prevents the use of 121-08286
  22mm T-6 Combo Lever™: Yamaha YZ 125 98-04, YZ 250 98-04, YZ 250F 02-04, YZ 400F 98-99, YZ 426F 00-02, YZ 450F 03-04
    REV. 06-02-08


                       (626) 792-7384
                    www.FlandersCompany.com
                                                                                                    Fax: (626) 792-5341
                                                                                                    www.FlandersCo.com
                                                                                                                                             75
                                                            Chain Tools
     Jumbo Chain Tool Kit                                                     Chain Breaker
     121-08135                                                                121-08001
     • Designed to break roller chain up to 630 (Fits all standard & O-ring   • For 420 to 530 chain
       chain sizes 520 to 630)                                                • Will push link pin completely through link / side plate
     • Designed to rivet chain up to 530 (not 630)                            • Handle folds away for easy storage
     • Masterlink side plate press kit included to press on side plates on    • Replaceable pin is heat treated for strength and wear resistance
       chains up to 530 (not 630)                                             • Will not work on EK 530 MVO/MVX
     • Screws & attachments are heat treated for strength and durability      • Max pin extension to drive out chain links is 18mm. The maximum
     • The extractor pin is precisely guided by a removable guide,              pin extension required to drive out the chain link is determined by
       ensuring long pin life                                                   measuring your chains width from outside face plate to outside
     • May be bolted to a work bench, supported in a vise or held by            face plate.
       handle
     • When bolted to a solid surface, air or electric wrenches may be
                                                                              121-08002 Replacement Pin
       used to break chain
     • Recommended for heavy-duty use
     • For riveting hollow nose master links
     • Requires 121-08142 Quad Stake Rivet Kit (not included) to rivet
       soft-nose type master link pin tip


     121-08D35 Replacement Pin




                                                                              Master Link Pliers
                                                                              121-08230
                                                                               • Designed to simplify installation and removal of clip-type master
                                                                                 links
                                                                               • One tip is shorter and notched to be placed on the pin which
                                                                                 allows the longer end to push the clip


     Quad Stake Rivet Kit
     121-08142
     • Safely and properly peen soft-nose-
       type master link pin tip
     • Retain that factory quad stake look
     • Not for use with hollow nose type
       master links.

                                                                                                                                            REV. 06-02-08



76              (626) 792-7384
             www.FlandersCompany.com
                                                                                                      Fax: (626) 792-5341
                                                                                                      www.FlandersCo.com
                                                             Chain Tools
                                         Press-fit Chain Link Tools
    Since about 1990, most new chains use press-fit type side plates on the connecting links. On this type of link, the side plate can not be installed
    properly without the aid of a special tool. The chain manufactures have decided the press fit adds strength to the connecting link and should always be
    used. The Motion Pro chain press tools below are designed to install the press-fit connecting links on 520-530 standard and O-Ring chains.

Chain Breaker &         Mini Chain Press Tool
Riveting Tool 121-08058 121-08070
•   Versatile enough to be used on cam chains or drive chains                 • Fits most 520 and 530 standard and O-ring chains
•   Will break chains from #35 to #630                                        • Hex key wrench is included with tool
•   For chain #520 and up, it is recommended to grind the rivet head          • Perfect addition for tool packs
•   Each kit includes 3 sizes to fit most chains (2mm, 3mm, 4mm)               • Made in the U.S.A.
•   Investment-cast, hardened body and redesigned body bolt
•   Recommended for light to medium-duty use
•   For riveting hollow nose master links
•   Kit includes press plates
121-08059 2mm Replacement Pin
121-08060 3mm Replacement Pin
121-08061 4mm Replacement Pin
121-08062 Replacement Rivet Tip
121-08067 Replacement Press Plates



                                                                              Chain Alignment Tool
                                                                              121-08048
                                                                              • Quick and accurate alignment.
                                                                              • Tool body clamps to rear sprocket while alignment rod points
                                                                                toward front sprocket.

Press Fit Chain Link Tool Kit                                                 • Made in the U.S.A.

121-08066
• Fits 520 and 530 standard and O-ring chains
121-08067 Replacement Press Plates
121-08403 Converts kit into chain breaker and
 riveting tool for 520, 525 and 530 chain.




REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                         Fax: (626) 792-5341
                                                                                                         www.FlandersCo.com
                                                                                                                                                             77
                                                            Chain Tools
     T-6 Chain Tool™                                                      Chain Breaker
     121-08358                                                            401-56400
     • For breaking 520 to 530 chain
     • For pressing on and off 520 and some 525 clip type
                                                                          Standard style. For up to 530 chains.
       master link side plates
     • Light weight, 6 oz. including press plates and handle
       (8 oz. with pouch)
     • Will push link pin completely through link/side plate
     • Handle detaches for easy storage. To reduce the weight even
       more a MP Tool (121-08161), 8mm combination wrench or 8mm
       socket with extension can be used as the handle
     • Custom pouch holds tool securely and includes pocket for extra
       chain or master links and a large accessory pocket
     • Body forged from high-strength 4130 chrome-moly
     • Body bolt and extractor bolt manufactured from billet high-
                                                                          Chain Riveting Tool
       strength 7075 T6 Aluminum
     • Replaceable pin is heat treated for strength and wear resistance
                                                                          401-56410
                                                                          Kit for installing Riveting Pins on cam or drive chains.
     • Press plates manufactured from light weight
       6061 T-6™ aluminum                                                 Kit has 3 pins (2.20 cam chain, 2.90-#35 chain, & 3.80
     • Perfect addition for tool packs                                      drive chain).
     • For use on clip type master links with press fit side plates only
     • This tool does not rivet master link pins

                   Does not rivet chain




                                                                          Chain Breaker
                                                                          401-56420
                                                                          Repair Shop Size
                                                                          • For 402, 428, 525, 530, & most 630 chains
                                                                          401-56421 Replacement Tip (Bag of 10)
     Replacement Parts
     121-08002 Replacement Pin
     121-08416 1/4” Drive x 8mm Adaptor



                                                                                                                                REV. 06-02-08



78                (626) 792-7384
               www.FlandersCompany.com
                                                                                               Fax: (626) 792-5341
                                                                                               www.FlandersCo.com
                                                Shop Equipment
                                              Parts Bin Boxes
                                           For best price, order 50 of a size
     18 Inches Long                                12 Inches Long
      109-01802          18 x 2 x4 1/2             109-01202          12 x 2 x 4 1/2
      109-01803          18 x 3 x4 1/2             109-01204          12 x4 x 4 1/2
      109-01804          18 x 4 x 4 1/2            109-01206          12 x 6 x 4 1/2
      109-01806          18 x 6 x 4 1/2            109-01210          12 x 10 x 4 1/2
      109-01808          18 x 8 x 4 1/2
      109-01810          18 x 10 x 4 1/2
      109-01812          18 x 12 x 4 1/2                                                        Tiny Bin Boxes
                                                                                    109-22402        Bin box divider fits 2” wide
                                                                                    109-22404        Bin box divider box fits 4” wide
                                                                                    109-22406        Bin Box divider box fits 6” wide




                                      Plastic Parts Boxes
                                                                     113-00200
                             113-00824                               18 compartment flexible
                             24 compartment flexible yellow           clear plastic box.
                             plastic box.                            Overall dimensions:
                             Overall dimensions:                     8-3/8” x 4-1/4” x 1- 5/16”
                             12” x 8-5/8” x 2-1/4”                   Compartment dimensions:
                             Compartment dimensions:                 1-5/16” x 1- 5/16” x 1-3/16”.
                             2-1/16” x 2-1/16” x 2-1/16”
                             Great for nuts and bolts.
                                                                     113-00201
                                                                     12 compartment clear plastic box.
                                                                     Overall dimensions:
                             113-00618                               8-3/8” x 4-1/4” x 1- 5/16”
                             18 compartment flexible yellow           Compartment dimensions:
                             plastic box.                            1-5/16” x 1- 5/16” x 1-3/16”
                             Overall dimensions:                     2” x 1-5/16” x 1-3/16”
                             10-7/8” x 6-1/2” x 1- 3/4”              4-1/8”x 1-5/16” x 1-3/16”
                                                                     Parts shown not included
                             Compartment dimensions:
                             2” x 1-11/16” x 1-1/2”
                             Great for screws and jets
                                                                     113-00210
                                                                     9 compartment clear plastic box.
                                                                     Overall dimensions:
                             113-00612                               7-1/16” x 3-1/2” x 1- 1/4”
                                                                     Compartment dimensions:
                             12 compartments flexible yellow
                             plastic box.                            1-5/8” x 1- 3/8” x 1-1/8”
                             Overall dimensions:                     3-7/16” x 1-1/8” x 1-1/8”
                             10-7/8” x 6-1/2” x 1- 3/4”
                             Compartment dimensions:
                                                                     113-00220
                                                                     6 compartment clear plastic box.
                             2” x 1-11/16” x 1-1/2”                  Overall dimensions:
                             Great for jets and needles              4-5/8” x 2-13/16” x 1- 3/16”
                                                                      Compartment dimensions:
                                                                     1-7/16 x 1-1/4” x 1”




                    113-72400                 Racer Special Spare Parts Box
                    15” x 11-3/4” x 2-1/2”    Contents are always visible and compartment sizes
                    24 Compartments           can be changed with the individual dividers provided.
                    15 movable dividers       See through lid shuts tight making spill proof in truck.
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                                Fax: (626) 792-5341
                                                                                                www.FlandersCo.com
                                                                                                                                       79
                                                    Shop Equipment
                                                    Cable Rack Displays
     These displays were designed with the dealer in mind. Now, cables can easily be displayed without taking up valuable
     shelf space. Simply hang them off the wall. We have redesigned our headercards so they hold the cable end prevent-
     ing cables from falling out of their display bags. Dealers can easily stock more applications by stocking Motion Pro
     cables than if you stocked only OEM cables. Hang these below one of our Motion Pro Banners and let your customers
     see your commitment to quality products.


     18” Cable Rack Display                                            36” Cable Rack Display
     121-01152                                                         121-01153
     • Hold up to 200 cables on wall space of 18” x 11”                • Hold up to 500 cables on wall space of 36” x 17”, with 14” depth
     • Black epoxy finish                                               • White epoxy finish
     • Kit contains 2 racks, end pieces, hardware and display header   • Kit contains 3 – 20-slot 36” cable racks, middle and end braces,
     card                                                              hardware and display header cards




     18” Cable Rack Only                                               36” Cable Rack Only
     121-01150                                                         121-01151
     • 10-slot cable holding system.                                   • 20-slot cable holding system
     • Black epoxy finish.                                              • White epoxy finish




                                                                                                                                 REV. 06-02-08



80             (626) 792-7384
            www.FlandersCompany.com
                                                                                            Fax: (626) 792-5341
                                                                                            www.FlandersCo.com
                                      Shop Equipment
                                          Display Hooks
                                             All wire display hooks for use on 1/4” peg board galvanized.
                                             .212” diameter wire.

                                             458-21804          4”
                                             458-21806          6”
                                             458-21808          8”
                                             458-21810          10”


                                             Peg or Slatwall hooks. Plastic base allows non-marring use on
                                             1/4” peg or slat wall displays. Galvanized .212” diameter wire

                                             458-23004          4”
                                             458-23006          6”
                                             458-23008          8”
                                             458-23010          10”




                                             Utility Hooks .312 wire for use on heavy objects.
                                             10” long Galvanized.

                                             458-21420          10”




                                             Gridwall Hooks for 3” wire gridwalls with stamped metal base
                                             with .212” diameter wire. Galvanized

                                             458-64004          4”
                                             458-64006          6”
                                             458-64008          8”
                                             458-64010          10”



                                             Slatwall Hooks, stamped metal base with .212” wire. Galvanized.

                                             458-24304          4”
                                             458-24306          6”
                                             458-24308          8”
                                             458-24310          10”




                                             Waterfall Garment Hooks. In standard for T-shirts, Jerseys or in Heavy
                                             Duty for leather jackets etc. 12” long.

                                             458-24605          Standard
                                             458-24607          Heavy Duty



REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                               Fax: (626) 792-5341
                                                                               www.FlandersCo.com
                                                                                                                      81
                                                  Shop Equipment
                                                     Display Hooks
     Scanner Hooks
     For peg or slat board.
     Enables placement of price and ID labels up front.
     Label holders must be ordered separately.

     458-33004         4”
     458-33006         6”
     458-33008         8”
     458-33009         9”
     458-35003         Label Holders
     458-01033         Labels - 33 per sheet



     All Wire Loop Hooks
     For heavier objects, .186” diameter wire. Galvanized.

     458-32004         4”
     458-32006         6”
     458-32008         8”




     Shelf Bracket
     May be used on peg or slat board,
     uses non-marring plastic hooks.

     458-23108         8”
     458-23110         10”
     458-23112         12”


                                                             Shelf Brackets




     Peg Board Mount Rack
     Holds books, catalogs, literature, brochures, etc.

     132-21018




     Helmet Hooks
     Designed to display without damaging all size
     motorcycle helmets.

     459-10033 Gridwall
     459-10034 Screw mount
     Quantity breaks @ 5 & 24 of one part number only.
     NO MIXING!




                                                                                                    REV. 06-02-08



82              (626) 792-7384
             www.FlandersCompany.com
                                                                              Fax: (626) 792-5341
                                                                              www.FlandersCo.com
                                              Shop Equipment
Microfiche Reader                                                         Please use 3 letter code on bulb to
                                                                         determine correct replacement lamp.
Replacement Lamps
523-10205           DED Fits: Datamate 100 & 175; Eye-Com
                    5000; Bell & Howell ABR IV, ABR VIII,
                    ABR900. 85 watts, 13 volts




523-10212           DDS Fits: Micron 700 series from Kawasaki;
                    NCR Ultra VII. 80 watts, 21 volts
                                                                   523-10205




523-10237           FLT Fits: Datamate 495A; Micron 385, Eye-
                    Com 1000, 1100, 1200, 2000, 2100, 3000,
                    8100;                                                                   523-10212
                    Micron XL Series. 25 watts, 13.8 volts




523-10401           FLS or JRC/M Fits: Datamate 414. 28 watts,
                                                                   523-10237
                    12 volts




523-11157           FCS Fits: Bell & Howell SR series, Microde-
                    sign Readers supplied by Honda,
                    Yamaha & Suzuki. 150 watts, 24 volts                                   523-10401




523-11160           FDT Fits: NCR 200, 243, 300, 500, 456-3. 100   523-11157
                    watts, 12 volts




523-11161           FML Fits: Bell & Howell, R735 from Yamaha,                               523-11160
                    Datamate 895A, Micron 780A. 50 watts, 13
                    volts




                                                                   523-11161
REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                               Fax: (626) 792-5341
                                                                               www.FlandersCo.com
                                                                                                               83
                                                 Shop Equipment
                                                  Catalog Holders
     291-01006         Black
     291-01007         Gray
     Steel catalog holder, 30 degree angle, for counter. Holds six section units
     (not included - must be ordered separately - see below), includes end wings.



     291-01012         Black
     291-01013         Gray
     Steel catalog holder, 30 degree angle, for counter. Holds twelve section units
     (not included - must be ordered separately - see below), includes end wings.



     291-01206        Black
     291-01207        Gray
     Add on section extension. Will contain six section units (not included - must be
     ordered separately - see below), does not include end wings.


     291-01212        Black
     291-01213        Gray
     Add on section extension. Will contain twelve section units (not included - must
     be ordered separately - see below), does not include end wings.


     291-05000        Black.
     291-05001        Gray
     End wings only for catalog holder stand. Sold as pair.




     291-02023
     Post section for three hole catalogs and loose sheets, 1 inch capacity




     291-02043
     Double post section for three hole catalogs and loose sheets,
     2-3/16 inch capacity




     291-02013
     Ring section for three hole catalogs and loose sheets, 1 inch capacity


     291-02033
     Double ring section for three hole catalogs and loose sheets,
     2 3/16 inch capacity


     291-02020
     Bar section for bound catalogs that are not drilled.
     Holds catalogs with a rod across the middle pages

                                                                                                              REV. 06-02-08



84              (626) 792-7384
             www.FlandersCompany.com
                                                                                        Fax: (626) 792-5341
                                                                                        www.FlandersCo.com
                                          Shop Equipment
                                Catalog Holder Accesories


                                            291-06612         Black (turntable only)
                                            291-06613         Gray (turntable only)

                                            Turnable, pivots 360 degrees. Holds #291-01006, 291-01007,
                                            291-01012, 291-01013, 291-01206 or 291-01207 from opposite
                                            page. Allows you to show catalog items to customers with ease.




                                            291-05175
                                            Index divider kit with 1/5” cut tabs containing 5 pages and inserts.




REV. 06-02-08


                   (626) 792-7384
                www.FlandersCompany.com
                                                                                  Fax: (626) 792-5341
                                                                                  www.FlandersCo.com
                                                                                                                   85
   (626) 792-7384         Fax: (626) 792-5341
www.FlandersCompany.com   www.FlandersCo.com

				
DOCUMENT INFO