Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

Download Catalogue - The Hobby eStore

VIEWS: 399 PAGES: 219

									                                   08/2011




1:5 Petrol Cars (3)
Electric RC Cars (23)
|___ 1:10 Brushless Cars (5)
|___ 1:10 Electric RC Cars (9)
|___ 1:16 Brushless Cars (2)
|___ 1:8 Brushless Cars (5)
|___ Electric Self Build (2)
Nitro RC Cars (30)
|___ 1:10 RTR Nitro RC Cars (16)
|___ 1:16 RTR Nitro RC Cars (2)
|___ 1:8 Nitro Rc Cars (10)
|___ Unbuilt Nitro Cars (2)
RC Aeroplanes (29)
|___ 4CH Stunt Planes (3)
|___ Large Scale RC Planes (8)
|___ RC Gliders (1)
|___ RC Scale Planes (4)
|___ RC Trainer Planes (3)
|___ RC Warbirds (6)
|___ Twin Motor RC Planes (4)
RC Boats (8)
|___ 1:14 RC Boats (1)
|___ 1:16 RC Boats (4)
|___ 1:30 RC Boats (1)
|___ Hovercraft (2)
RC Helicopters (18)
|___ 4Ch RC Helicopters (1)
|___ 6Ch RC Helicopters (10)
|___ Co-Axial RC Helicopter (3)
|___ Mini Helicopters (4)
RC Jets (17)
|___ 55mm EDF Fan Jets (1)
|___ 64mm EDF Fan Jets (11)
|___ 70mm EDF Fan Jets (3)
|___ Twin Fan Jets (2)



                                    Page 1/219
                            08/2011




RC Motorbikes (1)
RC Car Upgrade Parts (32)
RC Helicopter Parts (21)
RC Plane Parts (31)




                             Page 2/219
                                                                                                                              08/2011




1:5 Petrol Cars




                  ShengQi 1/5th Petrol RC Monster Trucks - HUMMER 2.4Ghz
                  Model: ZCA4


                  The latest 1/5th petrol trucks and buggies from ShengQi. Until now rc trucks that run on actual petrol have been
                  very expensive with prices starting at over £700 that made them a specialist and exclusive product. We are
                  pleased to say that ShengQi have now changed this and these great petrol trucks are now available to everyone at
                  realistic prices. These petrol rc trucks run on a mix of normal unleaded petrol and 2 stroke oil. Both of these are
                  available from any petrol station.


                  The all new ShengQi petrol trucks are beasts with a massive feature list. These are extreme petrol model trucks
                  with loads of power thanks to its DZY 23cc engine with Japanese Waibro Carburetor and NGK spark plug that
                  pushes these petrol trucks to speeds of up to 80 km/h! Check out the video below to see what these petrol monster
                  trucks are capable of. Look at similar 1/5th scale petrol rc trucks with the same or less specs on the market, as you
                  will see they retail for over twice what we are selling these for!


                  The first thing that you will notice when you open the trucks box is this petrol trucks massive size and the excellent
                  shells. The petrol trucks come fully built with a choice of camouflaged Hummer shell or black Ford F-150 monster
                  trucks shell that both look really cool. Everything you need is included with the trucks and as these are actual petrol
                  powered model trucks you can get the fuel from a petrol station rather than having to visit a model shop to get
                  special fuel like you have to with the nitro models. Unlike nitro rc trucks, these petrol RC trucks run on a mix of
                  normal unleaded petrol and 2 stroke oil. Both of these are available from any petrol station which makes the petrol
                  trucks more practical and cheaper to run than a nitro model. Mixing the petrol is very easy. You simply fill up a
                  petrol can with 5 litres of unleaded at the petrol station then pour in 125ml of 2 stroke oil. This oil is usually found
                  inside petrol stations with the other oils.


                  If you look at other 1:5 scale petrol RC trucks on the market you will see even though they are more expensive
                  than the ShengQi Petrol Trucks they usually don't include everything you need and you have to go out and
                  buy your own radio equipment, special 1:5 scale trucks steering servo, electronics battery pack and charger. With
                  this package everything you need is included, even a high capacity rechargeable battery pack with UK charger for
                  the receiver and servos and a tool kit with all the tools needed to maintain your model. Both the trucks servo and
                  radio equipment are OEM Futaba which means they are made in the Futaba factory to ensure they are good quality
                  and reliable.


                  This truck now comes with 2.4G radio equipment and the transmitter features an LCD display.


                  Specifications:
                  Petrol Trucks Scale: 1/5
                  D/W: Rear 2WD system, differential with built-in gears
                  Brakes: Rear Disc
                  Speed: 80km/h




                                                                                                                                 Page 3/219
                                                                                                         08/2011




Petrol Engine: Single cylinder, two stroke, air-cooled, 23cc
Torque: 1.8N.m
Power: 1.58kw / 2.15 bhp
Fuel: Petrol / engine oil (25:1)
Fuel tank capacity: 40 minutes
Trucks Start method: pull start
LxWxH: 700x530x350mm
Trucks Tyres: 190mm
Trucks Wheelbase (F/R): 480mm
Tread: 340mm(F)/370mm(R)


Features:
Fully assembled petrol RC Truck
Powerful pull start 23cc petrol engine
Heavy duty parts (many metal)
Differential with built-in gear
Fully adjustable oil-filled shocks
Disc brake system
CE/ROHS approved rc controller
Strong 15kg/cm OEM Futaba servo
Sealed electronics box for use on wet days
Aluminium chassis
Waibro Carburetor
NGK spark plug
2.4G rc radio equipment
80 km/h - petrol trucks top speed


Required To Use
A mix of normal unleaded petrol and 2 stroke oil (Both of these are available from any petrol station)
8 x AA Batteries
£414.49




ShengQi 1/5th Scale Petrol Radio Control Baja Buggy 2.4Ghz
Model: ZCA5


The latest 1/5th petrol rc cars from ShengQi. Until now rc cars that run on actual petrol have been very expensive
with prices starting at over £700 that made them a specialist and exclusive product. We are pleased to say
that ShengQi have now changed this and these great models are now available to everyone at realistic prices.
These petrol rc cars run on a mix of normal unleaded petrol and 2 stroke oil. Both of these are available from any
petrol station.


The all new ShengQi petrol RC Baja is a beast with a massive feature list. This is an extreme model with loads of




                                                                                                          Page 4/219
                                                                                                             08/2011




power thanks to its DZY 23cc engine with Japanese Waibro Carburetor and NGK spark plug that pushes it to
speeds of up to 80 km/h! The attention to detail and quality of parts is superior to others and can not be beaten on
value for money. Look at similar 1/5th petrol rc cars with the same or less specs on the market, as you will see they
retail for over twice what we are selling these for!


Our new stock of these is equipped with 2.4G Radio Equipment and an LCD transmitter.


The first thing that you will notice when you open the box is the massive size and the excellent carbon shell.
Unique to these models, the glossy finsihed shell looks amazing. Everything you need is included and as these are
actual petrol powered models you can get the fuel from a petrol station rather than having to visit a model shop to
get special fuel like you have to with the nitro models.


Unlike a nitro radio controlled car, the petrol RC baja runs on a mix of normal unleaded petrol and 2 stroke oil. Both
of these are available from any petrol station which makes them more practical and cheaper to run than a nitro
model. Mixing the petrol is very easy. You simply fill up a petrol can with 5 litres of unleaded at the petrol station
then pour in 125ml of 2 stroke oil. This oil is usually found inside petrol stations with the other oils.


If you look at other 1:5 scale petrol RC cars on the market you will see even though they are more expensive they
usually don't include everything you need and you have to go out and buy your own radio equipment, special
1:5 scale steering servo, electronics battery pack and charger. With this package everything you need is included,
even a high capacity rechargeable battery pack with UK charger for the receiver and servos and a tool kit with all
the tools needed to maintain the buggy. Both the servo and radio equipment are OEM Futaba which means they
are made in the Futaba factory to ensure they are good quality and reliable.


If you are looking for a quality petrol RC cars you will not find a better package for anywhere near this price. Hard
aluminium chassis, centrifugal clutch, helical toothed differential, central gearbox, big fuel tank, over length oil filled
shocks, the ShengQi Baja Buggy ticks all the boxes!


Specifications:
Scale: 1/5
D/W: Rear 2WD system, differential with built-in gears
Brakes: Rear Disc
Speed: 80km/h
Engine: Single cylinder, two stroke, air-cooled, 23cc
Torque: 1.8N.m
Power: 1.58kw / 2.15 bhp
Fuel: Petrol / engine oil (25:1)
Fuel tank capacity: 40 minutes
Start method: pull start
2.4GHz LCD transmitter
LxWxH: 817x480x280mm
Tyres: 170mm x 60mm
Wheelbase (F/R): 570mm


Features:
Fully assembled Baja Buggy




                                                                                                               Page 5/219
                                                                                                           08/2011




Powerful pull start 23cc engine
Heavy duty parts (many metal)
Differential with built-in gear
Fully adjustable oil-filled shocks
Disc brake system
CE/ROHS approved controller
Strong 15kg/cm OEM Futaba servo
Sealed electronics box for use on wet days
Aluminium chassis
Waibro Carburetor
NGK spark plug
80 km/h top speed
2.4GHz radio equipment
Beautiful carbon style shell


Required To Use:
A mix of normal unleaded petrol and 2 stroke oil (Both of these are available from any petrol station)
8 x AA Batteries
£399.49




ShengQi 1:5 Petrol RC Monster Trucks - FORD F-150 2.4Ghz
Model: ZCA1


The latest 1/5th petrol radio controlled cars from ShengQi. Until now rc cars that run on actual petrol have been
very expensive with prices starting at over £700 that made them a specialist and exclusive product. We are
pleased to say that ShengQi have now changed this and these great models are now available to everyone at
realistic prices. These petrol radio controlled cars run on a mix of normal unleaded petrol and 2 stroke oil. Both of
these are available from any petrol station.


The all new ShengQi petrol RC car is a beast with a massive feature list. This is an extreme model with loads of
power thanks to its DZY 23cc engine with Japanese Waibro Carburetor and NGK spark plug that pushes it to
speeds of up to 80 km/h! Check out the video below to see what this monster truck is capable of. Look at similar
1/5th scale models with the same or less specs on the market, as you will see they retail for over twice what we are
selling these for!


The first thing that you will notice when you open the box is the massive size and the excellent shells. They come
fully built with a choice of camouflaged Hummer shell or black Ford F-150 monster truck shell that both look really
cool. Everything you need is included and as these are actual petrol powered models you can get the fuel from a
petrol station rather than having to visit a model shop to get special fuel like you have to with the nitro models.
Unlike a nitro radio controlled car, the petrol Remote control cars runs on a mix of normal unleaded petrol and 2
stroke oil. Both of these are available from any petrol station which makes them more practical and cheaper to run
than a nitro model. Mixing the petrol is very easy. You simply fill up a petrol can with 5 litres of unleaded at the




                                                                                                             Page 6/219
                                                                                                             08/2011




petrol station then pour in 125ml of 2 stroke oil. This oil is usually found inside petrol stations with the other oils.


If you look at other 1:5 scale petrol Remote Control cars for sale on the market you will see even though they are
more expensive they usually don't include everything you need and you have to go out and buy your own
radio equipment, special 1:5 scale steering servo, electronics battery pack and charger. With this package
everything you need is included, even a high capacity rechargeable battery pack with UK charger for the receiver
and servos and a tool kit with all the tools needed to maintain the buggy. Both the servo and radio equipment are
OEM Futaba which means they are made in the Futaba factory to ensure they are good quality and reliable.


These trucks now come complete with 2.4Ghz radio equipment.


Features:
Fully assembled petrol RC car
Powerful pull start 23cc engine
Heavy duty parts (many metal)
Differential with built-in gear
Fully adjustable oil-filled shocks
Disc brake system
CE/ROHS approved controller
Strong 15kg/cm OEM Futaba servo
Sealed electronics box for use on wet days
Aluminium chassis
Waibro Carburetor
NGK spark plug
80 km/h top speed


Specifications:
Scale: 1/5
D/W: Rear 2WD system, differential with built-in gears
Brakes: Rear Disc
Speed: 80km/h
Engine: Single cylinder, two stroke, air-cooled, 23cc
Torque: 1.8N.m
Power: 1.58kw / 2.15 bhp
Fuel: Petrol / engine oil (25:1)
Fuel tank capacity: 40 minutes
Start method: pull start
2.4Ghz Radio equipment
LxWxH: 700x530x350mm
Tyres:190mm
Wheelbase (F/R): 480mm
Tread: 340mm(F)/370mm(R)


Required To Use
A mix of normal unleaded petrol and 2 stroke oil (Both of these are available from any petrol station)
8 x AA Batteries




                                                                                                                Page 7/219
          08/2011




£399.49




           Page 8/219
                                                                                                                              08/2011




Electric RC Cars -/- 1:10 Brushless Cars




                     Bullet Electric Brushless RC Buggy
                     Model: A2011T


                     Brushless motor systems are a new technology in electric remote control cars that until recently have only been
                     available as upgrades for normal rc cars. This is because to have a brushless setup not only requires the brushless
                     motor but also a brushless ESC, li-polymer battery and special li-polymer charger which are all very expensive and
                     would cost hundreds of pounds. Then came some brushless 1:16 scale brushless electric models that due to their
                     smaller size only needed a smaller brushless motor etc so could be priced at a realistic level. AND NOW... We are
                     pleased to introduce the full 1:10 scale Bullet brushless electric rc buggy. With a big brushless motor and 11.1V
                     Li-Polymer battery these models are ridiculously quick and at an amazing price!


                     The electric Bullet buggy is a high performance, high speed machine. With its unique narrow chassis and sway
                     bars fitted as standard the model performs both on and off the tarmac. The 4WD system with front and rear
                     differentials evenly distributes the massive power to the wheels making the Bullet a race winner.


                     The special motor in this model is much quicker than the motors found in other models. Because it is brushless it
                     also means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full
                     advantage of that the standard 7.2v Ni-Cd batteries that are found in most rc car kits has been replaced with a very
                     powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed for these special
                     batteries. The brushless RC buggy comes fully built with everything you need to get racing apart from eight normal
                     AA batteries for the radio handset. This is a high spec racing model that at full speed requires some real skill to
                     control it. It is therefore recommended for ages 14+.


                     Features:
                     1/10 Scale brushless powered car
                     4WD Shaft drive system
                     Fully ball raced
                     High torque servo
                     Extreme power brushless motor
                     Oil-filled shocks
                     Powerful Li-Polymer battery with balanced charger
                     Front and rear bevel differentials
                     Brushless ESC
                     Pre-painted exclusive body shell
                     High quality FM 27MHZ CE approved Radio system with changeable crystals.


                     Specifications:
                     Width: 260MM
                     Height: 140MM
                     Length: 390MM




                                                                                                                                Page 9/219
                                                                                                        08/2011




Wheelbase: 280MM
Gear ratio: 8.95:1
Wheel diameter.: 80*30MM
Ground clearance: 25MM
Radio: FM 27mhz Pistol Type
Battery: 11.1V 1800mah Li-Polymer
Motor: Brushless 2399kv
ESC: 25A Brushless
Scale: 1:10


Required To Use
8 x AA Batteries
£159.49




GS Racing Vision EvoE RTR Brushless RC Car
Model: GSC4282


So here is the GS Racing Vision Pro RTR The international race winning GS Racing is back in the UK with their
top of the range pro level series. GS Racing are known worldwide for their cutting edge, market leading models.
They are not only high performance with the latest components and designs, but also highly reliable thanks to their
high quality materials and construction in Taiwan using only Taiwan sourced parts. The R&D team has been
hard at work perfecting the brand new range ready for the next season. The EvoE is the top of the range 1/10th
electric car based on the standard Vision but with many performance upgrades pre-installed.


Equipped with a powerful 10.5R brushless motor, this car is wickedly fast. The motor provides smooth, rapid
acceleration and the torque needed for controlled fast cornering.


Built on the success of the Vision EVO RTR, GS have added a higher level of specification to these touring cars.
The transmission, suspension and all mechanical components have been strengthened and re-engineered to a
PRO level. The Vision is equipped with a 4mm 7075 aluminium alloy chassis, competition shocks and swaybar
system. The newly added belt drive system makes this car very fast and reliable. Other than the full list of features
below, the EvoE is packing a CNC lightened chassis; aluminium shock bodies with an adjustable damping system;
front and rear sway bars; lightened aluminium wheel hub; and aluminium parts where needed. The quality of these
models has to be seen to be believed, but these photographs show the attention to detail in the shells and also the
chassis.


The car comes complete with a powerful GS brushless motor, 2.4GHz radio equipment and choice of detailed
licensed body shell.


The EvoE comes boxed as follows:
100% Assembled
Pre-printed body




                                                                                                         Page 10/219
                                                                  08/2011




Decals
Manual
Full 2.4G radio equipment


Features
Fully adjustable pivot ball suspension
Finished pre-mounted body
GS Racing camber clip system
Belt drive system
2.4G Radio system with LCD display
Sealed radio box with transponder mount
Powerful GS brushless motor
7075 aluminium alloy chassis – for lightness and strength
Aluminium shock bodies with adjustable dampening system
Front and rear sway bar system
Lightened aluminium wheel hubs
GS Racing camber clip system


Specifications
Scale: 1/10th
Length: 380mm
Height: 104mm
Ground clearance: 5.5mm
Axle base: 260mm
Gear ratio: 5.82:1
Race Weight: 3300g
Radio equipment: 2.4GHz with LCD display
F. Wheelbase: 198mm
R. Wheelbase: 198mm


Required To Use
8 x AA Batteries
Lipo battery
£259.49




                                                                  Page 11/219
                                                                                                           08/2011




HSP Brushless Air Racer - 2.4Ghz
Model: H94126


The Air Racer is a unique new model. A brushless motor creates an air pocket under the model that keeps it
suspended in the air and then a second brushless motor powers a fan at the back pushing it to extreme speeds. A
micro servo fitted to a fin on the rear fan takes care of the steering giving full 360 degree control. Please note this
model does not run on water, it runs on land, sand and snow etc.


The Air Racer comes fully built with electronics and radio equipment included. The transmitter is an upgraded
2.4Ghz version and the model is powered by two high power brushless motors and electronic speed controllers. As
standard the model includes a 7.2V Ni-Mh battery and charger although upgrading to a Li-Po battery is highly
recommended to get the full performance from the brushless motors. This is a great fun model for someone looking
for something different or a perfect gift. Also available as an upgrade is an LED light kit as shown in the picture
which looks really cool when fitted.


Features
Unique fun model
Twin brushless motors and ESCs
Simple design for easy maintenance
Runs on smooth surfaces such as concrete, dirt, snow, sand etc (not water)
2.4Ghz radio equipment


Specifications
Scale: 1/10
Transmitter: 2.4Ghz
Motors: 1 x Brushless 3500KV + 1 x Brushless 2315KV
ESC: 1 x Brushless 25A, 1 x Brushless 18A
Battery: 7.2V 1600mAh Ni-Mh (upgrade to LiPo advised)
Charger: UK Standard Charger
Servo: 1 x Micro Servo


Required To Use
8 x AA batteries for the transmitter
£59.99




Raptor Radio Controlled Electric Brushless Truggy
Model: A2012T


This is the Raptor, it's a third of a metre wide, it's got a powerful brushless motor, and it's
incredibly fast, this is one of our most awesome radio controlled cars. Massive wheels, with high grip tyres, suitable
for use either on or off road, this Raptor will go pretty much anywhere, and it doesn't hang about. To cushion
the blows it is equipped all around with oil filled shock absorbers, and responsive and articulate wishbone
suspension technology. Performance isn't all that this truggy offers though, it has a prepainted shell, and is




                                                                                                            Page 12/219
                                                                                                        08/2011




ready to run straight from the box - just take the Raptor brushless rc truggy out, charge its battery, place 8AA
batteries in the handset and you're ready to go! With that big brushless motor and 11.1V Li-Polymer battery
these models are ridiculously quick and at an amazing price!


The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre
of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials
evenly distributes the massive power to the wheels making the Raptor a race winner.


The special motor in this model is much quicker than the motors found in other models. Because it is brushless it
also means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full
advantage of that the standard 7.2v Ni-Cd batteries that are found in most radio controlled cars kits has been
replaced with a very powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed
for these special batteries. The brushless Rc truggy comes fully built with everything you need to get racing apart
from eight normal AA batteries for the radio handset. This is a high spec racing model that at full speed requires
some real skill to control it. It is therefore recommended for ages 14+.


Features:
1/10 Scale brushless powered car
4WD Shaft drive system
Extreme power brushless motor
Oil-filled shocks
Powerful Li-Polymer battery with balanced charger
Front and rear bevel differentials
Brushless ESC
Pre-painted exclusive body shell
High quality FM 27MHZ CE approved Radio system with changeable crystals


Specifications:
Width: 330MM
Height: 140MM
Length: 410MM
Wheelbase: 270MMv Gear ratio: 8.95:1
Wheel dia.: 110*55MM
Ground clearance: 36MM
Radio: FM 27mhz Pistol Type
Battery: 11.1V 1800mah Li-Polymer
Motor: Brushless 2399kv
ESC: 25A Brushless
Scale: 1:10


Required To Use:
8x AA Batteries
£159.49




                                                                                                         Page 13/219
                                                                                                          08/2011




Trooper Brushless Radio Controlled Short Course Truck
Model: A2016T


Here we introduce the 1:10 scale brushless short course rc truck - the Trooper; this has a big brushless motor and
11.1V Li-Polymer battery so it will go unbelievably quickly. The 4WD system with front and rear differentials evenly
distributes the massive power to the big wheels making this truck a real tour de force.


Although this model is described as 1:10 scale it is as long as some of our 1:8 scale models like the Werewolf so
you really are getting a lot of model for your money. The Trooper rc truck is a high performance, high speed
machine. It is fitted with highly efficient heatsink metal motor mounts, as standard to prevent the motor getting too
hot when being pushed hard.


Brushless motor systems are a new technology that until recently have only been available as upgrades for normal
rc cars.


This is because to have a brushless setup not only requires the brushless motor but also a brushless ESC,
li-polymer battery and special li-polymer charger which are all very expensive and would cost hundreds of pounds.


Then came some brushless 1:16 scale brushless models that due to there smaller size only needed a smaller
brushless motor etc so could be priced at a realistic level.


The special motor in this model is much quicker than the motors found in other models. Because it is brushless it
also means the motor needs no maintenance and can handle a lot more power being pumped into it.


So to take full advantage of that the standard 7.2v Ni-Cd batteries that are found in most rc car kits has been
replaced with a very powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed
for these special batteries.


The brushless RC Truck comes fully built with everything you need to get going apart from eight normal AA
batteries for the radio handset. This is a high spec racing model that at full speed requires some real skill to control
it. It is therefore recommended for ages 14+.


Features
1/10 scale brushless short-course rc truck;
Fully assembled, ready to run, 4WD shaft drive system;
Low center of gravity and high durablity;
Motor mount can not only keep the motor cool, but also protect the motor when jumping and bashing;
10mm bore plastic oil shocks;
Aluminium chassis;
Powerful brushless motor and ESC;
Equipped with 11.1v Li-po battery and balanced charger.


Specifications
Width: 310mm;
Height: 190mm;
Length: 550mm;




                                                                                                           Page 14/219
                              08/2011




Track F/R: 320mm;
Wheelbase: 320mm;
Ground clearance: 28mm;
Gear ratio: 8.95
Weight: 2460g
3CH FM radio
3650 brushless motor
5A ESC
11.1V 2200mAh Li-po battery


Required To Use
8 x AA Batteries
£199.49




                              Page 15/219
                                                                                                                                08/2011




Electric RC Cars -/- 1:10 Electric RC Cars




                      Bug Crusher Electric Radio Controlled Truck
                      Model: NBC-E


                      If you are ready to take the electric rc hobby to the next level with a proper rc monster truck then this is the model
                      to go for. No longer do you have to pay hundreds of pounds if you want a fully built model that features all the
                      technology of any top spec truck.


                      This is a high spec model that not only is high quality and pro built but is also highly upgradeable. This model is not
                      to be confused with the entry level rc cars, this is a proper rc hobby racing machine! Aluminium centre drive shaft,
                      high spec electronic speed control, aluminium capped oil filled shocks, performance differentials, aluminium radio
                      tray and much more, the Bug Crusher is in a league of its own.


                      As standard the Bug Crusher comes with a high precision 540 motor, HSP speed controller and 7.2V 1800mah
                      Tamiya type battery pack. This setup gives more than enough power and speed for any serious racer but if you are
                      the kind of person that likes to take things to the extreme then you can upgrade your model with a brushless kit.
                      With the brushless motor, ESC and Li-po battery the truck will go ridiculously quick and will take some real skill to
                      control. You can add these upgrades at the bottom but please note they will not come fitted so you will need to fit
                      yourself. The upgrade kit contains 1 x high power brushless motor, 1 x brushless ESC, 1 x 11.1V 2200mah LiPo
                      battery and 1 x LiPo battery charger.


                      These models are kitted out with 2.4G wheel type controllers.


                      Features:
                      Aluminium centre drive joint
                      Powerful motor system
                      Large solid shock towers
                      High performance front/rear diffs
                      Powerful suspension
                      Aluminium radio tray
                      Eight oil filled aluminium capped shocks
                      Anti-skid tyres and chrome plated rims
                      Spring loaded tough bumper


                      Specifications:
                      Length: 400mm
                      Height: 160mm
                      Width: 300mm
                      Wheelbase: 275mm
                      Gear Ratio 1 Speed: 11:1
                      Ground Clearance: 30mm




                                                                                                                                 Page 16/219
                                                                                                         08/2011




Weight: 1530g
Tyres: 60mm width 120mm diameter
Radio: Wheel type
Motor : RC 540
ESC: HSP 03018
Battery: 7.2V 1800mah


Required To Use:
8 x AA Batteries
£89.49




Bullet Electric RC Buggy - Brushed Version
Model: A2011T-V1


The Bullet is a high spec electric radio controlled buggy that is amazing value for money. It comes fully built with
everything included but at a low price. This is a proper radio controlled race ready model with front and rear gear
differentials, electronic speed controller and powerful 540 motor.


The Bullet buggy is a high performance, high speed machine. With its unique narrow chassis and sway bars fitted
as standard the model performs both on and off the tarmac. The 4WD system with front and rear differentials
evenly distributes the massive power to the wheels making the Bullet a race winner.


The 4WD system not only improves handling but reduces wheel spin giving quicker acceleration. Each wheel has
its own independent wishbone suspension with an oil filled shock which also improves the performance of the
model. Along with the 4WD it also means the Bullet has good off road abilities. The electronic speed controller
allows you to put the power down gradually as needed with the brake allowing you to enter corners quicker and
then power out of the other side. Pushing the brake a second time activates reverse allowing you to back up if you
get stuck. The front a rear gear differentials improve cornering massively and like on a real car are essential at high
speeds.


Features
1/10 Scale car
4WD Shaft drive system
High power 540 brushed motor
Oil-filled shocks
7.2V Tamiya type battery pack with charger
Front and rear bevel differentials
Electronic speed controller
Pre-painted exclusive body shell
AM 27MHZ CE approved Radio system with changeable crystals for using more than one model at a time without
interference




                                                                                                          Page 17/219
                                                          08/2011




Specifications
Width: 260MM
Height: 140MM
Length: 390MM
Wheelbase: 280MM
Gear ratio: 8.95:1
Wheel dia.: 80*30MM
Ground clearance: 25MM
Radio: AM 27mhz Pistol Type
Battery: 7.2V Ni-Mh Tamiya type
Motor: 540 Brushed
ESC: Proportional forward, brake, proportional reverse.
Scale: 1:10


Required To Use
8 x AA Batteries
£104.49




                                                          Page 18/219
                                                                                                          08/2011




Flying Fish Electric Radio Controlled Drift Car
Model: H94123


This HSP Flying Fish represents a new generation of 1/10 scale on road drift RC car. This RTR Radio Controlled
Drift RC car is electric powered and perfect for indoor or outdoor drifting


Based on our popular and durable on road electric powered RC car, this drift version adds specially designed solid
compound drift tires pre-mounted high performance wheels. This RTR Radio Controlled Drift RC car is 4WD for
consistent drift action on a wide variety of surfaces, easy to drive, and has all of the features you need to adjust for
a perfect drift set-up: camber, toe-in, body level, etc.


Features:
Four wheel drive system
Front/rear camber and toe-in setup
Powerful RC 540 motor
Anodised aluminium centre drive shaft
High performance front/rear diffs
Stable rc car suspension arms & solid front/rear shock tower
Oil filled aluminium capped shocks
Precise steering fitting delivers quick response
High precision SP03018 electronic speed control (ESC)
Complete ball bearings for a smooth and an efficient drive
High performance anti-skid drift tires, chrome plated spoke rims & pre-mount drift wheels
7.2v 1800mAh Ni-MH battery power
Extra large front bumper foam provides protection against sudden impacts to rc car


Specifications:
Height: 112mm
Length: 360mm
Width: 200mm
Gear Ratio: 6:1
Track: 195mm
Ground Clearance: 4.5mm
Motor: RC540
Wheelbase: 260mm
Radio: 2ch Wheel type 27mhz
Wheel Diameter: 65mm
Wheel Width: 26mm
Battery: 7.2v 1800MaH with charger


Required to use:
8 x AA Batteries
£89.49




                                                                                                           Page 19/219
                                                                                                         08/2011




FS Racing Bolt 2WD Electric Remote Control Buggy
Model: FS53288


The newest radio control model from FS racing is the 2WD electric Bolt. This model has been designed with fun in
mind with the retro style 2wd system and rear mounted motor making this an old school racer. It comes with a
powerful 540 motor, ball differentials, electric speed controller, fully installed RC equipment and 7.2V battery pack
with charger all included so all you need to do is charge the batteries and race.


The high grip front tyres are coupled with over-sized ones at the rear making the buggy perfect for dirt tracks and
off road racing. As the buggy is 2WD all the power is sent to the rear tyres so they are extra thick allowing the
power to be put down with minimum skid while the the front tyres can dig into the dirt to give good grip. With this in
mind the gearbox which uses the latest ball diff design has been fully sealed to keep dust out and out-perform
standard gear type diffs.


Features
All new ball differentials made in Taiwan
Dust-proof sealed gear box
Fun 2WD, rear motor setup
Adjustable throughout
Oil filled shock absorbers
Aerodynamic body and spoiler
Fully built with everything included
High grip tyres


Specifications
Length: 380mm
Width: 250mm
Height: 148mm
Wheelbase: 268mm
Tyre width: 28mm (Front), 46mm (Rear)
Tread: 245mm (Front), 260mm (Rear)
Gear ratio: 8.51:1
Drive: 2WD
Remote control cars electric Motor: RC540
Radio: AM 27 Mhz
Battery pack: 7.2V 1800mAh Ni-Cd Rechargeable


Required To Use
8 x AA Batteries
£84.49




                                                                                                          Page 20/219
                                                                                                         08/2011




FS Racing Electric Radio Control Buggy Pro
Model: FS53888PRO


The all new pro buggy from FS racing is a 4WD high powered electric racing model. Not to be confused with toy
radio controlled buggies, these are the real deal. With a big powerful 540 motor, ball differentials and an electric
speed controller the RC buggy is very powerful. Fully installed RC equipment, 7.2V battery pack with charger are all
included.


The buggy comes fully built so all you need to do is charge the battery, do some pre-checks and then you are
ready to race. The radio transmitter has interchangeable frequency crystals so buggies can be raced against each
other without interference. The buggy style gives the best of both worlds and is excellent both on and off road. It
has enough ground clearance and large tyres for off road bashing but also has a low centre of gravity and race
setup making it just as capable on road. There are several versions of this buggy but this is the best pro version
packed with features that are not normally found on standard level models.


Something that really makes it stand out from the competition is that the standard gear diffs have been replaced
with special ball diffs as shown in the pictures at the bottom of this page. The battery has been upgraded to a
whopping 3000mAh and plastic parts under the most strain have been replaced with stronger aluminium ones. This
is matched with an upgraded ESC and powerful motor which all work together to make this a very quick model. The
buggy is fully ball raced instead of the usual metal bearings which means it runs smoother and quicker. Suspension
is independent on each wheel and is provided by aluminium oil filled shock absorbers. The model is highly
adjustable throughout so can be setup and changed to suit the driving conditions and drivers preference.


Features:
All new ball differentials
Four wheel drive system w/shaft drive
Fully ball raced (28 pcs)
Adjustable throughout
Aluminium oil filled shock absorbers
Upgraded with powerful 3000mAh battery
Fully built with everything included
Very high speed model
Upgraded aluminium parts


Specifications:
Length: 380mm
Width: 250mm
Height: 148mm
Wheelbase: 268mm
Tyre diameter: 85mm
Gear ratio: 9.17:1
Weight: 1400g
Drive: 4WD
Motor: RC540
Radio: AM 27 Mhz
Battery pack: 7.2V 3000mAh Ni-Cd Rechargeable




                                                                                                          Page 21/219
                                                                                                            08/2011




Required To Use
8 x AA Batteries
£109.49




FS Racing Electric Radio Controlled Car Pro
Model: FS53101


The all new rally car from FS racing is a 4WD high powered electric racing car. Not to be confused with toy radio
controlled cars, these are the real deal. With a big powerful 540 motor, bevel differentials and an electric speed
controller the RC car is very powerful. Fully installed RC equipment, 7.2V battery pack with charger are all included.


The remote control car comes fully built so all you need to do is charge the battery, do some pre-checks and then
you are ready to race. The radio transmitter has interchangeable frequency crystals so cars can be raced against
each other without interference. The rally car styles are fully licensed and look fantastic. Like with a real rally car the
focus for the chassis design and layout is on high speed with amazing handling and light off road use if needed.
The car has a very low centre of gravity which means it can perform better on road than trucks and buggies.


The rally car is packed with features that are not normally found on standard level models. For starters we have
upgraded the battery to a whopping 3000mAh. This means the car will run longer at it's maximum speed and
also have longer drive time between charges. This is matched with an upgraded ESC and powerful motor which all
work together to make this a very quick model. The remote control car is fully ball raced instead of the usual metal
bearings which means it runs smoother and quicker. Suspension is independent on each wheel and is provided by
oil filled aluminium capped shock absorbers. The remote control car model is adjustable throughout so can be
setup and changed to suit the driving conditions and drivers preference.


Features:
Four wheel drive system w/shaft drive
Functional front & rear differentials
Fully ball raced
Adjustable throughout including camber adjustment.
Licensed realistic body shell.
Oil filled shock absorbers
Upgraded with powerful 3000mAh battery
Supplied with AM radio equipment
Very high speed model


Specifications:
Length: 380mm
Width: 190mm
Height: 120mm
Wheelbase: 260mm




                                                                                                             Page 22/219
                                                                                                         08/2011




Weight: 1400g
Drive: 4WD
Motor: RC540
Radio: AM 27Mhz
Battery pack: 7.2V 3000mAh Ni-Cd Rechargeable


Required To Use:
8 x AA Batteries
£99.49




FS Racing Electric Remote Control Monster Truck
Model: FS53804


The all new monster truck from FS racing is a 4WD high powered electric racing RC truck. Not to be confused with
toy radio controlled cars, these are the real deal. With a big powerful 550 motor, bevel differentials and an electric
speed controller the RC truck is very powerful. Fully installed RC equipment, 7.2V battery pack with charger are all
included.


The truck comes fully built so all you need to do is charge the battery, do some pre-checks and then you are ready
to race. The radio transmitter has interchangeable frequency crystals so trucks can be raced against each other
without interference. The monster truck style with the large oversized tyres, increased ground clearance and
monster bumper make this a great model for off road bashing whilst the independent suspension and differentials
also means it can perform well on road when needed.


The truck is packed with features that are not normally found on standard level models. For starters we have
upgraded the battery to a whopping 3000mAh. This means the truck will run longer at it's maximum speed
and also have longer drive time between charges. This is matched with an upgraded ESC and powerful motor
which all work together to make this a very quick model. The truck is fully ball raced instead of the usual metal
bearings which means it runs smoother and quicker. Suspension is independent on each wheel and is provided by
oil filled aluminium capped shock absorbers.The model is adjustable throughout so can be setup and changed to
suit the driving conditions and drivers preference.


Features:
Four wheel drive system w/shaft drive
Functional front & rear differentials
AL6061/T6 chassis with carbon fibre surface
Fully ball raced
Front NCVD shaft
Monster oversized tyres
Oil filled shock absorbers
Upgraded with powerful 3000mAh battery
Fully built with everything included




                                                                                                          Page 23/219
                                                                                                         08/2011




Very high speed model


Specifications:
Length: 430mm
Width: 330mm
Height: 190mm
Tyre Diameter: 120mm
Gear Ratio: 10.8:1v Chassis: 2mm AL6061
Drive: 4WD
Motor: RC550
Radio: AM 27Mhz
Battery pack: 7.2V 3000mAh Ni-Cd Rechargeable


Required To Use
8 x AA Batteries
£109.49




Raptor Radio Controlled Electric Truggy - Brushed Version
Model: A2012T-V1


The Raptor is a high spec electric radio controlled truggy that is amazing value for money. It comes fully built with
everything included but at a low price. This is a proper radio controlled race ready model with front and rear gear
differentials, electronic speed controller and powerful 540 motor.


The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre
of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials
evenly distributes the massive power to the wheels making the Raptor a race winner.


The 4WD system not only improves handling but reduces wheel spin giving quicker acceleration. Each wheel has
its own independent wishbone suspension with an oil filled shock which also improves the performance of the
model. Along with the 4WD it also means the Raptor has good off road abilities. The electronic speed controller
allows you to put the power down gradually as needed with the brake allowing you to enter corners quicker and
then power out of the other side. Pushing the brake a second time activates reverse allowing you to back up if you
get stuck. The front a rear gear differentials improve cornering massively and like on a real car are essential at high
speeds.


Features
1/10 Scale car
4WD Shaft drive system
High power 540 brushed motor
Oil-filled shocks
7.2V Tamiya type battery pack with charger




                                                                                                          Page 24/219
                                                                                                          08/2011




Front and rear bevel differentials
Electronic speed controller
Pre-painted exclusive body shell
AM 27MHZ CE approved Radio system with changeable crystals for using more than one model at a time without
interference


Specifications
Width: 330MM
Height: 140MM
Length: 410MM
Wheelbase: 270MM
Gear ratio: 8.95:1
Wheel dia.: 110*55MM
Ground clearance: 36MM
Radio: AM 27mhz Pistol Type
Battery: 7.2V Ni-Mh Tamiya type
Motor: 540 Brushed
ESC: Proportional forward, brake, proportional reverse.
Scale: 1:10


Required To Use
8x AA Batteries
£104.49




XSTR Electric Radio Control Buggy 2.4G
Model: H94107


If you are ready to take the electric rc hobby to the next level with a proper rc buggy then this is the model to go
for. No longer do you have to pay hundreds of pounds if you want a fully built model that features all the technology
of any top spec buggy. This is a high spec model that not only is high quality and pro built but is also highly
upgradeable. This model is not to be confused with the entry level rc cars, this is a proper rc hobby racing machine!
Aluminium centre drive shaft, high spec electronic speed control, aluminium capped oil filled shocks, performance
differentials, aluminium radio tray and much more, the XSTR is in a league of it's own.


Now supplied with 2.4G radio gear this model represents amazing value for money!


As standard the XSTR comes with a high precision 540 motor, HSP speed controller and 7.2V 1800mah Tamiya
type battery pack. This setup gives more than enough power and speed for any serious racer but if you are the kind
of person that likes to take things to the extreme then you can upgrade your model with a brushless kit.


With the brushless motor, ESC and Li-po battery the truck will go ridiculously quick and will take some real skill to
control. You can add these upgrades at the bottom but please note they will not come fitted so you will need to fit




                                                                                                           Page 25/219
                                                                                                 08/2011




yourself.


The upgrade kit contains 1 x high power brushless motor, 1 x brushless ESC, 1 x 11.1V 2200mah LiPo battery and
1 x LiPo battery charger.


Features:
Aluminium centre drive joint
Powerful motor system
Aluminium shock towers
High performance front/rear diffs
Powerful suspension
Aluminium radio tray
Four oil filled aluminium capped shocks
Anti-skid tyres and chrome plated rims
Stylish off road wing
4WD system


Specifications:
Length: 400mm
Height: 160mm
Width: 250mm
Wheelbase: 275mm
Gear Ratio 1 Speed: 8.3:1
Ground Clearance: 26mm
Weight: 1300g
Tyre Width: 32mm (F) 40mm (R)
Tyre Diameter: 86mm
Radio: Wheel type 2.4G Transmitter
Motor : RC 540
ESC: HSP 03018
Battery: 7.2V 1800mah


Required To Use:
8 x AA Batteries
£89.49




                                                                                                  Page 26/219
                                                                                                                                 08/2011




Electric RC Cars -/- 1:16 Brushless Cars




                     Fire Wolf Electric Brushless RC Buggy
                     Model: A2003T


                     There is only one way to best describe this brushless RC car and that is extreme speed. The Fire Wolf will run at
                     over 40mph out of the box! This is all thanks to the brushless motor and high power 11.1v Li-Polymer battery pack.


                     The special motor in this model is much quicker than the motors found in other models. Because it is brushless it
                     also means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full
                     advantage of that the standard 7.2v Ni-Cd batteries that are found in most rc car kits has been replaced with a very
                     powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed for these special
                     batteries.


                     With this massive amount of power it is important that the model can handle the speed and pressure that is
                     produced so many of the parts have been made stronger like you would find in a nitro rc car. An aluminium chassis,
                     high torque servo, aluminium drive shaft and extra thick oil filled shocks, along with a mixture of metal and plastics
                     mean it has a better chance of surviving a high speed impact, although it is not indestructible.


                     The brushless RC car comes fully built with everything you need to get racing apart from eight normal AA batteries
                     for the radio handset. We have not been this excited about a new model for a long time and you will know why
                     when you hit the throttle for the first time and see it pop a little wheelie before taking off at such a crazy speed.
                     Highly recommended.


                     Features:
                     Fully assembled ready to run
                     High speed model - 40+ Mph
                     Fully ball raced
                     Powerful brushless motor
                     11.1v Li-po battery
                     Front/rear metal differentials
                     Aluminium drive shafts
                     Sway bar as standard
                     Adjustable camber
                     Adjustable oil filled shocks
                     Highly adjustable for race tuning
                     4WD shaft driven system
                     Slipper system
                     Aluminium chassis


                     Specifications:
                     Width: 187mm




                                                                                                                                  Page 27/219
                                                                                                             08/2011




Height: 108mm
Length: 232mm
Track: 126mm
Wheelbase: 177mm
Gear ratio: 10.86:1
Tyres: 70mm
Ground clearance: 18mm
Transmitter: 2ch FM


Required To Use
8 x AA Batteries
£124.49




Pioneer Electric Brushless RC Truggy
Model: A2010T


There is only one way to best describe this brushless radio controlled car and that is extreme speed. The Pioneer
will run at over 40mph out of the box! This is all thanks to the brushless motor and high power 11.1v Li-Polymer
battery pack.


The special motor in this brushless radio controlled car is much quicker than the motors found in other models.
Because it is brushless it also means the motor needs no maintenance and can handle a lot more power being
pumped into it. So to take full advantage of that the standard 7.2v Ni-Cd batteries that are found in most rc car kits
has been replaced with a very powerful 11.1v lithium battery along with a balanced lithium battery charger which is
needed for these special batteries.


With this massive amount of power it is important that the model can handle the speed and pressure that is
produced so many of the parts have been made stronger like you would find in a nitro rc car. An aluminium chassis,
high torque servo, aluminium drive shaft and extra thick oil filled shocks, along with a mixture of metal and plastics
mean it has a better chance of surviving a high speed impact, although is not indestructible.


The model comes fully built with everything you need to get racing apart from eight normal AA batteries for the
radio handset. We have not been this excited about a new model for a long time and you will know why when you
hit the throttle for the first time and see it pop a little wheelie before taking off at such a crazy speed. Highly
recommended.


Features:
Fully assembled ready to run
High speed model - 40+ Mph
Fully ball raced
Powerful brushless motor
11.1v Li-po battery




                                                                                                              Page 28/219
                                             08/2011




Front/rear metal differentials
Aluminium drive shafts
Sway bar as standard
Adjustable camber
Adjustable oil filled shocks
Highly adjustable for race tuning
4WD shaft driven system
Slipper system
Aluminium chass


Specifications:
Width: 205mm
Height:110mm
Length: 260mm
Track: 165mm
Wheelbase: 180mm
Gear ratio: 10.86:1
Tyres: 73mm x 39.5mm
Ground clearance: 25mm Transmitter: 2ch FM


Required To Use
8 x AA Batteries
£129.49




                                             Page 29/219
                                                                                                                               08/2011




Electric RC Cars -/- 1:8 Brushless Cars




                     Barbarian EXL 1/8 Scale Brushless RC Monster Truck 2.4G
                     Model: A2019T-1


                     The Barbarian EXL is a fully built, fully featured, top of the range 1/8 scale off-road monster truck, and comes with
                     many feature enhancements to make this a superb electric brushless motor powered model. This is the Pro version
                     and it is fitted with high quality components - is 4WD and equipped with a powerful brushless motor which gives this
                     monster phenomenal acceleration!


                     This model is the pinnacle of the brushless monster rc trucks range! Its shiny chrome wheels just finish off the well
                     engineered look of this model. Also you get a choice of colour for the beautifully finished shells - red or blue.


                     It has huge 16mm super big bore oil aluminum shocks, designed to smooth the ride as it speeds over the terrain of
                     your choice; these in turn are secured to the aluminium chassis by a hardened aluminium shock tower. Couple this
                     with the ultra-strength front and rear bumpers and you have a model that should withstand pretty much everything
                     you can throw at it!


                     Although no model is indestructible so we stock a full range of spares and upgrades to enhance and repair your
                     model should a mishap occur!


                     The Barbarian EXL Rc Trucks model is built using advanced components and innovative engineering to get the
                     best performance out of your package. It has a newly developed C-hub steering system, where the king pin axis
                     extends to the wheel centre; this feature improves steering performance. It has a specially designed suspension
                     system, with twin adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving
                     mode.


                     Part of its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting
                     with grip and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks
                     associated with monster truck use. It has been engineered with a gear ratio that offers both superb acceleration
                     and a high top speed. Not only this but the gearbox consists of all steel gear and is of a pinion design which makes
                     it easier to maintain and repair.


                     The Barbarian EXL is built around a narrow, but solid aluminum chassis; this centralised chassis design allows
                     quicker steering and faster response. The trucks blows are cushioned by the 16mm super big bore oil shocks, see
                     pictures.


                     It also has fully adjustable sway bar ball cups, for customisable and better traction and stability, depending on
                     whether you're trucks speeding across tarmac or roughing it over gravel and tougher terrain. Additionally the
                     front bumper is built so that it moves backwards on impact, this can prevent the chassis from becoming distorted or
                     even broken when landing after jumps. All the linkages can be set with adjustable turnbuckle.




                                                                                                                                Page 30/219
                                                                                                       08/2011




Due to the amount of power this combination of battery, ESC and motor can deliver, the Barbarian EXL features
two cooling fans - one for the motor, one for the ESC.


This is no small model, the Barbarian is a beast - 570mm long and with a massive 50mm of ground clearance - on
top of this it is almost as wide as it is long!


You'll be able to drive this almost everywhere - tarmac, gravel, on-road, off-road - the choice is yours.


Features
4WD, Brushless Power System;
Newly designed C-hub steering system. King pin axis extends to the wheel centre, improving steering
performance;
Newly developed suspension system, twin adjustable rear suspension modes for flexible driving;
Solid aluminum chassis, centralised chassis design to get quicker steering and fast response;
Motor mount, not only keeps the motor cool, but also protects the motor when jumping and bashing
Adjustable battery holder mounts, can fit almost all stick Li-Pos available in the market;
Optional mechanical braking system, provides accurate deceleration and jumping control;
16mm super big bore oil aluminum shocks;
All steel gear, machined motor gear, machined diff. gear;
17mm hex alum. wheel hub;
Realistic All-terrain tyres with foam inserts;
Ultra-strong front and rear bumpers;
Performance-designed chrome wheel.
Front CVD, has all ball bearing construction


Specifications
Height: 230mm
Length: 570mm
Width: 450mm
Wheel base: 370mm
Track F/R: 355mm
Ground clearance: 50mm
Weight: 4600g


Required To Use
8 x AA Batteries
£239.49




                                                                                                        Page 31/219
                                                                                                        08/2011




GS Racing CLXE 1/8th Electric RC Buggy KIT
Model: GSC8001ED


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. This is the CLXE Pro electric kit for experienced racers looking to upgrade to a
model that can win national rally-cross races.


Leaving behind old traditions and taking buggy design to a new and higher standard, is the Storm CLXE
competition 1/8th off road brushless buggy. Using the highly successful Storm CL-1 Advanced Plus as the
foundation, GS has created a lighter, stronger and more nimble buggy. Durability, balance, quality and weight: In
each area improvements have been made resulting in a buggy that turns faster lap times yet is consistent and easy
to drive.


The kit comes with loads of GS Factory Team optional parts that add strength and enhanced performance to meet
the hardest competition head-on. The CLXE Pro kit offers the new and best parts in one package to create the
ultimate racing machine. Zero bump steer, the smallest differentials in a model this size, captured hinge pins,
carbon and steel parts, the features just go on and on.


This is a PRO SPEC self assembly kit and will give you the leading edge in races.


Features
Adjustable wheelbase with long travel suspension front and rear
Zero bump steer 20 degree C-hub/knuckles
Compact and balanced chassis layout
Captured hinge pin design front and rear. All arms can be used left or right
Adjustable front upper and lower arm position settings
Rubber sealed bearings throughout
Adjustable Ackerman and ball bearing supported bell cranks
7075 CNC lightweight narrow chassis with steel droop stops
Lightweight 10T hardened helical cut pinion gears
Full set of lightweight CV driveshafts standard
Hard anodized wheel nuts with covered wheel nuts standard
Lightweight outdrives and lightweight 40T conical gears mated to small diameter differentials
Lightweight 42T spur gear, 2 piece center diff mount
16mm Aluminum threaded shocks with optional springs and pistons standard


Specifications
Scale: 1/8th
Length: 510mm
Height: 200mm
Ground clearance: 60mm
Axle Base: 326-330mm
F. Wheelbase: 305mm




                                                                                                         Page 32/219
                                                                                                         08/2011




R. Wheel Base: 307mm
Gear Ratio: 10.5:1 (40/10T)
Race Weight: 3600g


Required To Use
This is a kit only. Radio gear, electronics, motor, tyres etc are all required.
£369.49




Werewolf 1/8 Brushless Electric RC Buggy - PRO Version
Model: A2015TPRO


Our highest spec electric radio control car is the all new 1/8th brushless Werewolf. Designed with pro racing in
mind this model will allow you to race and win at a National level. It's feature packed with many new exclusive
innovations found only on this model that puts it ahead of the competition. The brushless setup with big powerful
motor and 11.1V li-po battery allows the Werewolf to go well over 50mph as standard out of the box and then the
upgradeable setup including the option to add an extra three batteries means the potential of the buggy is endless.
For a race though a model needs to be quick on the corners as well as the straight and the Werewolf certainly has
that covered with the highly adjustable settings and high spec design making it an all round race winner.


The Werewolf comes in two different versions, standard and pro. Although very similar the pro version has been
upgraded with sway bars and front CVD shafts fitted as standard. The pro version also has aluminium shocks with
adjustable turnbuckles whereas the standard has plastic shocks.


The brushless Radio control car comes fully built with everything you need to get racing apart from eight normal
AA batteries for the radio handset. As the radio equipment is 2.4G it means many models can be raced together at
the same time. This is a high spec radio control car racing model that at full speed requires some real skill to control
it. It is therefore recommended for ages 14+.


Features:
1/8 Scale brushless powered radio control car
Extreme High Speeds
2.4G Radio Equipment
4WD Shaft drive system
3 diff. shaft drive 4WD
2.5mm aluminium chassis
3mm F/R Alum. shock tower;
High-torque metal geared steering servo
Front universal drive shafts (pro version)
All linkages set with adjustable turnbuckles
Option for four disc brake system
Brushless motor, brushless ESC
Li-Po battery and balanced charger




                                                                                                          Page 33/219
                                                                                                             08/2011




Plus many more. See below images for rest of features.


Specifications
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3000g
Radio: 2.4Ghz Pistol Type
Battery: 11.1V Li-Po With Charger
Motor: Brushless with ESC
Scale: 1:8


Requied To Use
8 x AA Batteries
£259.49




Werewolf 1/8 Brushless Electric RC Buggy - Standard Version
Model: A2015T


Our highest spec electric radio controlled car is the all new 1/8th brushless Werewolf. Designed with pro racing in
mind this model will allow you to race and win at a National level. It's feature packed with many new exclusive
innovations found only on this model that puts it ahead of the competition. The brushless setup with big powerful
motor and 11.1V li-po battery allows the Werewolf to go well over 50mph as standard out of the box and then the
upgradeable setup including the option to add an extra three batteries means the potential of the buggy is endless.
For a race though a model needs to be quick on the corners as well as the straight and the Werewolf certainly has
that covered with the highly adjustable settings and high spec design making it an all round race winner.


The Werewolf comes in two different versions, standard and pro. Although very similar the pro version has been
upgraded with sway bars and front CVD shafts fitted as standard. The pro version also has aluminium shocks with
adjustable turnbuckles whereas the standard has plastic shocks.


The brushless RC car comes fully built with everything you need to get racing apart from eight normal AA batteries
for the radio handset. As the radio equipment is 2.4G it means many models can be raced together at the same
time. This is a high spec racing model that at full speed requires some real skill to control it. It is therefore
recommended for ages 14+


Features:
1/8 Scale brushless powered car
Extreme High Speeds




                                                                                                              Page 34/219
                                                         08/2011




2.4G Radio Equipment
4WD Shaft drive system
3 diff. shaft drive 4WD
2.5mm aluminium chassis
3mm F/R Alum. shock tower;
High-torque metal geared steering servo
Front universal drive shafts (pro version)
All linkages set with adjustable turnbuckles
Option for four disc brake system
Brushless motor, brushless ESC
Li-Po battery and balanced charger
Plus many more. See below images for rest of features.


Specifications:
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3000g
Radio: 2.4Ghz Pistol Type
Battery: 11.1V Li-Po With Charger
Motor: Brushless with ESC
Scale: 1:8


Required To Use
8 x AA Batteries
£229.49




                                                         Page 35/219
                                                                                                                                 08/2011




Electric RC Cars -/- Electric Self Build




                       Self build Raptor Rc Truggy - Brushed Version
                       Model: A2012S-B


                       These rc kits are perfect for those who enjoy building models as much as using them! Forget Lego etc, these self
                       build kits provide hours of fun and when they are finished they are actually fun to use! For the hours of use and
                       enjoyment you will get from first building and then racing them, these kits are amazing value for money. If you are
                       new to electric rc cars then buying a self build kit is a great way to learn about the hobby and see how they work
                       before going out and racing them. We sell some self builld models to schools as they are educational and a great
                       introduction to mechanics and engineering. There is no other product on the market that gives such a complete all
                       in the box kit like this.


                       The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre
                       of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials
                       evenly distributes the massive power to the wheels making the Raptor a race winner.


                       AND NOW... We are pleased to introduce the full 1:10 scale Raptor rc truggy self build kit. With a big motor and
                       7.2V battery these models are rapid, great fun and all this at an amazing price!


                       Unlike other self build rc kits on the market that only include the basic chassis and none of the electronics etc,
                       these rc kits include all the components needed to complete them! motor, ESC, pistol type radio equipment,
                       grease, oil etc - everything is there, even the tools to build them. Construction will take around 8 - 12 hours on
                       average and is recommended for ages 14+.


                       All you need once the model is fully constructed is 8 AA batteries for the transmitter, then you can let her rip!


                       Features
                       1/10 Scale build it yourself car
                       Everything needed to build included, even the tools.
                       4WD Shaft drive system
                       High power 540 motor
                       Oil-filled shocks
                       7.2V Tamiya type battery pack with charger
                       Front and rear bevel differentials
                       Electronic speed controller
                       Pre-painted exclusive body shell
                       CE approved Radio system with changeable crystals for using more than one model at a time without interference


                       Specifications
                       Width: 330MM
                       Height: 140MM




                                                                                                                                  Page 36/219
                                                                                                         08/2011




Length: 410MM
Wheelbase: 270MM
Gear ratio: 8.95:1
Wheel dia.: 110*55MM
Ground clearance: 36MM
Radio: AM 27mhz Pistol Type
Battery: 7.2V Ni-Mh Tamiya type
Motor: 540 Brushed
ESC: Proportional forward, brake, proportional reverse.
Scale: 1:10


Required To Use
8 x AA Batteries
£109.49




Self Build Raptor RC Truggy - Brushless Version
Model: A2012S-A


These kits are perfect for those who enjoy building models as much as using them! Forget Lego etc, these self
build kits provide hours of fun and when they are finished they are actually fun to use! For the hours of use and
enjoyment you will get from first building and then racing them, these kits are amazing value for money. If you are
new to electric rc cars then buying a self build kit is a great way to learn about the hobby and see how they work
before going out and racing them. We sell some self builld models to schools as they are educational and a great
introduction to mechanics and engineering. There is no other product on the market that gives such a complete all
in the box kit like this.


The Raptor truggy is a high performance, high speed speed machine. With its unique truggy tyres and low centre
of gravity design the models performs both on and off the tarmac. The 4WD system with front and rear differentials
evenly distributes the massive power to the wheels making the Raptor a race winner.


Brushless motor systems are a new technology that until recently have only been available as upgrades for normal
rc cars. This is because to have a brushless setup not only requires the brushless motor but also a brushless ESC,
li-polymer battery and special li-polymer charger which are all very expensive and would cost hundreds of pounds.
Then came some brushless 1:16 scale brushless models that due to their smaller size only needed a smaller
brushless motor etc so could be priced at a realistic level.


AND NOW... We are pleased to introduce the full 1:10 scale Raptor brushless rc truggy self build kit. With a big
brushless motor and 11.1V Li-Polymer battery these models are ridiculously quick and at an amazing price!


Unlike other self build kits on the market that only include the basic chassis and none of the electronics etc, these
kits include all the components needed to build them! Brushless motor, ESC, pistol type radio equipment, grease,
oil etc - everything is there, even the tools needed to build them. Construction will take around 8 - 12 hours on




                                                                                                          Page 37/219
                                                                                                          08/2011




average and is recommended for ages 14+.


The special motor in this kit is much quicker than the motors found in other models. Because it is brushless it also
means the motor needs no maintenance and can handle a lot more power being pumped into it. So to take full
advantage of that the standard 7.2v Ni-Cd batteries that are found in most rc car kits has been replaced with a very
powerful 11.1v lithium battery along with a balanced lithium battery charger which is needed for these special
batteries.


All you need once the model is fully constructed is 8 AA batteries for the transmitter, then you can let her rip!


Features
1/10 Scale brushless powered build it yourself car
Everything needed to build included, even the tools
4WD Shaft drive system
Extreme power brushless motor
Oil-filled shocks
Powerful Li-Polymer battery with balanced charger
Front and rear bevel differentials
Brushless ESC
Pre-painted exclusive body shell
High quality FM 27MHZ CE approved Radio system with changeable crystals


Specifications
Width: 330MM
Height: 140MM
Length: 410MM
Wheelbase: 270MM
Gear ratio: 8.95:1
Wheel dia.: 110*55MM
Ground clearance: 36MM
Radio: FM 27mhz Pistol Type
Battery: 11.1V 1800mah Li-Polymer
Motor: Brushless 2399kv
ESC: 25A Brushless
Scale: 1:10


Required To Use
8 x AA Batteries
£159.49




                                                                                                           Page 38/219
                                                                                                                           08/2011




Nitro RC Cars -/- 1:10 RTR Nitro RC Cars




                     Backwash Nitro Radio Controlled Buggy
                     Model: H94166


                     This is the great looking and even better performing HSP nitro radio controlled buggy. The buggy is extra tough
                     and a good all rounder performing well both on road and off. The Backwash is feature packed making it one of the
                     top spec buggies on the market and the .18 engine along with the automatic 2 speed gearbox makes it extremely
                     quick. Please note there are two other cheaper versions of the HSP nitro buggy but this is the top of the range one
                     that has the two speed gearbox and also the pivot ball suspension. These also have our upgrades on them such as
                     the chrome finished wheels, Infinity engine and wheel type transmitter. The Backwash comes fully built with
                     everything included apart from fuel, glow start (both optional below) and 12 normal AA batteries.


                     This version of this nitro radio controlled buggy have been upgraded with high quality Team Infinity engines.
                     Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and one
                     of the most reliable engines on the market. Usually these models come with engines made in Taiwan or China that
                     you will see being offered by other model shops selling these but from our experience we have found the extra few
                     pounds for a Japanese engine is well worth it for the difference in quality and performance.


                     We have specified this Backwash so that it is kitted out with wheel type 2.4GHz controllers. These have many
                     advantages over AM/FM transmitters:




                     Improved reliability due to less interference at this frequency range


                     Quicker more responsive control


                     Lower power consumption


                     Many models can drive together at once without need for checking frequencies and crystals etc




                     Specifications:
                     Length: 400mm
                     Height: 160mm
                     Width: 250mm
                     Wheelbase: 275mm
                     Gear Ratio 2 Speed: 5.84:1(H) 8.58:1(L)
                     Ground Clearance: 26mm
                     Front Tyres: 32mm width 86mm diameter
                     Rear Tyres: 40mm width 86mm diameter
                     Radio: Wheel type 2.4G




                                                                                                                            Page 39/219
                                                                                                       08/2011




Engine: Infinity .18


Required to use:
Fuel, glow start (both optional below) and 12 normal AA batteries.


Features:
Pivot Ball suspension
Assembled Oil-filled aluminium shocks
2.5mm thick anodised aluminium chassis
Composite Tuned Pipe
Pre-painted body with decals applied
Super-efficient 4WD shaft-drive
75 cc fuel tank with splash guard
2 speed automatic gearbox
Hollow light weight flywheel
Slipper clutch system to protect spur gear
High impact & high traction electroplated wheels
Fiber disc brake for extra stopping power
Front and rear hardened metal drive gears
Sealed radio box protects the electronics
Adjustable steel turnbuckles
High performance Infinity 18 Engine
Wheel controller
£154.49




Backwash Pro Nitro Radio Controlled Buggy
Model: H94166PRO


The Backwash Pro is the ultimate nitro radio controlled car with many hop ups included as standard. If you want a
race ready model with all the main upgrades pre-installed then this is the perfect choice. You can't get a
1/10th buggy with a longer features list or that looks this good. We have taken a standard Backwash and then
crammed it with all the best optional parts which if purchased separately would cost a lot more. Also included is a
rechargeable battery pack and charger for the electronics which gives more power and speed to the servos than
using normal AA batteries.


As well as all the features found on the standard Backwash nitro radio controlled car, this pro version includes the
following:




Polished Aluminium Tuned Exhaust Pipe


Steel Universals Drive Shafts




                                                                                                        Page 40/219
                                                                                                    08/2011




Aluminium Upper Chassis


Aluminium Front Suspension Upper Arms


Aluminium Front Suspension Lower Arms


Aluminium Front Servo Link


Aluminium Rear Servo Link


Aluminium Rear Suspension Lower Arms


Aluminium Pro Shock Absorbers


Aluminium Exhaust Pipe


Aluminium Wheel Hexes


Aluminium 4mm Flanged Lock Nut


Rechargeable battery pack and charger for the electronics




Comes with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature a simplified
carb that makes them the easiest to start and most reliable engines on the market. Nitro engines usually have two
or more tuning needles but these only have a single adjustment that makes them much easier to use without
sacrificing any power.


We have specified this upgraded Backwash so that it is kitted out with wheel type 2.4GHz controllers. These have
many advantages over AM/FM transmitters:




Improved reliability due to less interference at this frequency range


Quicker more responsive control


Lower power consumption


Many models can drive together at once without need for checking frequencies and crystals etc




Specifications:
Length: 400mm
Height: 160mm




                                                                                                      Page 41/219
                                                                                                         08/2011




Width: 250mm
Wheelbase: 275mm
Gear Ratio 2 Speed: 5.84:1(H) 8.58:1(L)
Ground Clearance: 26mm
Front Tyres: 32mm width 86mm diameter
Rear Tyres: 40mm width 86mm diameter
Radio: Wheel type 2.4G
Engine: Infinity .18


Required to use:
Fuel, glow start (both optional below) and 8 normal aa batteries.


Features:
All the top features of the standard Backwash nitro radio controlled car, plus loads of hop ups pre-installed as listed
above!
High performance Infinity 18 Engine
Wheel controller
Battery pack for electrics
£199.49




Bug Crusher Nitro Remote Control Monster Truck
Model: NBC-N


This is the great looking and even better performing monster truck. Many of the specs are the same as our
other nitro monster truck - the Conquistador - such as the high power gear ratio, aluminium shocks, large size 18
engine and high ground clearance. There are however a few differences. The most obvious difference is the visual
finish. Finished in a unique and funky paint job. Matched with the dual aluminium shocks and over sized wheels
with flashy rims we believe this could be the best looking nitro monster truck on the market.


This version of monster truck has been upgraded with high quality Team Infinity engines. Team
Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and one of the
most reliable engines on the market. Usually these models come with engines made in Taiwan or China that you
will see being offered by other model shops selling these but from our experience we have found the extra few
pounds for a Japanese engine is well worth it for the difference in quality and performance.


The Bug Crusher models are kitted out with wheel type controllersp>


Specifications:
Length: 400mm
Height: 185mm
Width: 310mm
Wheelbase: 275mm




                                                                                                          Page 42/219
                                                                                                         08/2011




Gear Ratio 1 Speed: 13.34:1
Ground Clearance: 30mm
Tyres: 60mm width 120mm diameter
Radio: Wheel type
Engine: Infinity .18


Required to use:
Fuel, glow start (both optional below) and 12 normal aa batteries.


Features:
Pivot Ball suspension
Innovative spring loaded bumper
8 Oil-filled aluminium shocks
2.5mm thick anodised aluminium chassis
Composite Tuned Pipe
Pre-painted body with decals applied
Super-efficient 4WD shaft-drive
75cc fuel tank with splash guard
Hollow light weight flywheel
Slipper clutch system to protect spur gear
High impact & high traction electroplated wheels
Fiber disc brake for extra stopping power
Front and rear hardened metal drive gears
Sealed radio box protects the electronics
Adjustable steel turnbuckles
High performance Infinity 18 Engine
Wheel controller
£159.49




Bug Crusher Pro Nitro Remote Control Truck
Model: NBC-NPRO


The Bug Crusher Pro is the ultimate 1:10 scale monster truck with many hop ups included as standard. If you want
a race ready monster truck with all the main upgrades pre-installed then this is the perfect choice. You can't
get a 1/10th monster truck with a longer features list or that looks this good. We have taken a standard Bug
Crusher and then crammed it with all the best optional parts which if purchased separately would cost a lot more.
Also included is a rechargeable battery pack and charger for the electronics which gives more power and speed to
the servos than using normal AA batteries.


As well as all the features found on the standard Bug Crusher this pro version includes the following:




                                                                                                         Page 43/219
                                                                                                      08/2011




Polished Aluminium Tuned Exhaust Pipe


Steel Universals Drive Shafts


Aluminium Upper Chassis


Aluminium Front Suspension Upper Arms


Aluminium Front Suspension Lower Arms


Aluminium Front Upper Arm Mount


Aluminium Rear Suspension Upper Arms


Aluminium Rear Suspension Lower Arms


Aluminium Pro Shock Absorbers


Aluminium Exhaust Pipe


Aluminium Wheel Hexes


Aluminium 4mm Flanged Lock Nut


Rechargeable battery pack and charger for the electronics




These models come with high quality Team Infinity engines. Team Infinity engines are made in Japan and feature
a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro engines
usually have two or more tuning needles but these only have a single adjustment that makes them much easier to
use without sacrificing any power.


These models are kitted out with wheel type controllers.




Specifications:
Length: 400mm
Height: 185mm
Width: 310mm
Wheelbase: 275mm
Gear Ratio 1 Speed: 13.34:1
Ground Clearance: 30mm
Tyres: 60mm width 120mm diameter
Radio: Wheel type
Engine: Infinity .18




                                                                                                       Page 44/219
                                                                    08/2011




Required to use:
Fuel, glow start (both optional below) and 8 normal aa batteries.


Features:
Pivot Ball suspension
Innovative spring loaded bumper
8 Oil-filled aluminium shocks
2.5mm thick anodised aluminium chassis
Composite Tuned Pipe
Pre-painted body with decals applied
Super-efficient 4WD shaft-drive
75cc fuel tank with splash guard
Hollow light weight flywheel
Slipper clutch system to protect spur gear
High impact & high traction electroplated wheels
Fiber disc brake for extra stopping power
Front and rear hardened metal drive gears
Sealed radio box protects the electronics
Adjustable steel turnbuckles
High performance Infinity 18 Engine
Wheel controller
£214.49




                                                                    Page 45/219
                                                                                                        08/2011




Condor Nitro Radio Controlled Buggy
Model: A3001T


The Condor nitro radio controlled car is our entry level model and is the easiest way to get into the exciting hobby
of model racing. Perfect for the beginner it features a simple gearbox, easy tune engine and easy layout which will
allow you to be racing in no time.


Beginners soon become novices so the Condor has still been designed with performance in mind. With its strong
alloy chassis, shaft driven 4WD system and sealed radio compartments it will tackle off road tracks as well as any
other model. The Condor comes fully built with radio control included. Just add fuel and a glow start (optional) and
prepare for some serious off road fun.


Each Acme Tech nitro radio controlled car now comes with a high quality .18 Team Infinity engine. Team Infinity
engines are made in Japan and feature a simplified carb that makes them the easiest to start and most reliable
engines on the market.


SPECIFICATIONS:
Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 8.35:1
Engine: Team Infinity .18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM


FEATURES:
1/10 Scale nitro radio controlled car
4WD Shaft drive system
Infinity powerful .18 pull start engine
Oil-filled shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glow Starter
£139.49




                                                                                                         Page 46/219
                                                                                                          08/2011




Condor Pro Nitro Radio Control Buggy
Model: A3002T


The Condor PRO is our favourite model. With high speed performance and off road capabilities you get the best of
both worlds. The Condor PRO is the next generation of the standard Condor, upgraded with a two speed automatic
gearbox, bigger engine and tough aluminium shock absorbers. It also comes fully loaded with racing ball bearings
througout instead of the standard metal bearings found in most models.


The Condor Pro boasts the high build quality of all Acme models with a strong alloy chassis, shaft driven 4WD
system and sealed radio compartments.


These nitro radio controlled cars come fully built with radio control included. Just add fuel and a glow start
(optional) and prepare for some serious off road fun.


Acme Tech nitro radio controlled cars now come with high quality Team Infinity engines. Team Infinity engines are
made in Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the
market. Engines in nitro radio controlled cars usually have two or more tuning needles but these only have a single
adjustment that makes them much easier to use without sacrificing any power.


SPECIFICATIONS:
Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: Team Infinity 18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM


FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity 18 size pull start engine
Aluminium oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
Anti-roll bars pre-fitted
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:




                                                                                                           Page 47/219
                                                                                                         08/2011




12 x AA Batteries
Model Fuel
Glowstarter
£159.49




Condor Pro Special Edition Nitro Buggy
Model: A3002TSE


The Condor Pro Special Edition is the top of the range Acme model with many hop ups installed as standard. With
all the aluminium upgrades and performance enhancing parts the Condor Pro becomes a stronger and better
performing model. We have taken a standard Condor Pro and then crammed it with all the best optional parts that if
purchased separately would cost a lot more. Top that of with the visual enhancements of the blue machined
aluminium parts and polished aluminium exhaust and you have got one awesome looking and performing buggy.


As well as all the features found on the standard Condor Pro this SE version includes the following:


1. Aluminium upper wishbones
2. Aluminium lower wishbones
3. Aluminium servo saver
4. Aluminium knuckle arms
5. Polish aluminium pipe
6. Hardened steel engine clutch gear
7. Hardened spur gear


Like the standard Condor Pro this special edition still comes fully built with UK radio equipment pre-installed.


Acme Tech models now come with high quality Team Infinity engines. Team Infinity engines are made in Japan
and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro
engines usually have two or more tuning needles but these only have a single adjustment that makes them much
easier to use without sacrificing any power.


SPECIFICATIONS:
Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: Team Infinity 18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM




                                                                                                          Page 48/219
                                                                        08/2011




FEATURES:
Fully Upgraded Special Edition!
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity 18 size pull start engine
Aluminium oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
Anti-roll bars pre-fitted
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£209.49




                                                                        Page 49/219
                                                                                                        08/2011




Conquistador Nitro RC Monster Truck
Model: A3003T


For the serious off roader the Conquistador nitro monster truck makes short work of even the toughest terrains. If
you are looking to race through mud, grass and even sand then this is the model for you.


With its long extra tough alloy shocks, bigger engine and stronger chassis the model has been carefully designed
to tackle any off road challenge. It features a sealed radio and battery compartment to keep the dirt out and big
chunky wheels for extra grip and ground clearance. The shaft driven 4WD system ensures that you wont be getting
left stuck in the mud! The model comes fully built with radio control included. Just add fuel and a glow start and
prepare for some serious off road fun.


Acme Tech models now come with high quality Team Infinity engines. Team Infinity engines are made in Japan
and feature a simplified carb that makes them the easiest to start and most reliable engines on the market. Nitro
engines usually have two or more tuning needles but these only have a single adjustment that makes them much
easier to use without sacrificing any power.


SPECIFICATIONS:
Width: 330MM
Height: 165MM
Track: 267MM
Length: 390MM
Wheel base: 280MM
Gear ratio: 10.44:1
Engine: Team Infinity 18
Wheel dia.: 108*56MM
Ground clearance (F/R): 38MM/46MM


FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Infinity 18 size pull start engine
Oil-filled Alluminium shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£149.49




                                                                                                         Page 50/219
                                                                                                       08/2011




Conquistador Special Edition Nitro RC Trucks
Model: A3006TSE


The Conquistador Special Edition is the top of the range Acme model with many hop ups installed as standard.
With all the aluminium upgrades and performance enhancing parts the Conquistador becomes a stronger and
better performing model. We have taken a standard Conquistador and then crammed it with all the best optional
parts that if purchased separately would cost a lot more. Top that of with the visual enhancements of the blue
machined aluminium parts and polished aluminium exhaust and you have got one awesome looking and
performing monster truck.


As well as all the features found on the standard Conquistador nitro trucks this SE version includes the following:


1. Aluminium upper wishbones
2. Aluminium lower wishbones
3. Aluminium servo saver
4. Aluminium knuckle arms
5. Polish aluminium pipe
6. Hardened steel engine clutch gear
7. Hardened spur gear
8 . Aluminium shock towers


Acme Tech nitro trucks now come with high quality Team Infinity engines. Team Infinity engines are made in
Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.
Engines in nitro trucks usually have two or more tuning needles but these only have a single adjustment that makes
them much easier to use without sacrificing any power.


The Conquistador Special Edition is the top of the range Acme model with many hop ups installed as standard.
With all the aluminium upgrades and performance enhancing parts the Conquistador becomes a stronger and
better performing model. We have taken a standard Conquistador and then crammed it with all the best optional
parts that if purchased separately would cost a lot more. Top that of with the visual enhancements of the blue
machined aluminium parts and polished aluminium exhaust and you have got one awesome looking and
performing monster truck.


SPECIFICATIONS:
Width: 330MM
Height: 165MM
Track: 267MM
Length: 390MM
Wheel base: 280MM
Gear ratio: 10.44:1
Engine: Team Infinity 18
Wheel dia.: 108*56MM
Ground clearance (F/R): 38MM/46MM


FEATURES:
Fully Upgraded Special Edition!




                                                                                                        Page 51/219
                                                                        08/2011




1/10 Scale nitro powered car
4WD Shaft drive system
Infinity 18 size pull start engine
Oil-filled Alluminium shocks
Single speed gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£209.49




                                                                        Page 52/219
                                                                                                            08/2011




Cyclone Nitro Remote Controlled Car
Model: A1001T


The Cyclone nitro car is our entry level model for the on road racer. Perfect for the beginner it features a simple
gearbox and easy layout which will allow you to be racing in no time. Although more simple than the PRO version
the Cyclone is still a seriously fast nitro racing car with an excellent performance profile.


With its strong alloy chassis, shaft driven 4WD system and sealed radio compartments you will be amazed at the
speed, handling and quality of such a low priced model. The Cyclone nitro cars come fully built with radio control
included. Just add fuel and a glow start and prepare to enter the world of nitro radio controlled racing.


Acme Tech nitro cars now come with high quality .18 Team Infinity engines. Team Infinity engines are made in
Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.


SPECIFICATIONS:
Width: 199MM
Height: 115MM
Track: 185MM
Length: 380MM
Wheelbase: 259MM
Gear ratio: 8.35:1
Engine: New Powerful Team Infinty 18
Wheel dia.: 64*26MM
Ground clearance: 8.5MM


FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Japanese high quality pull start engine
Oil-filled shocks
Single speed gear box
Powerful .18 engine
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£129.49




                                                                                                            Page 53/219
                                                                                                       08/2011




Cyclone Pro Nitro Radio Control Car
Model: A1002T


Our quickest model, the Cyclone PRO is for the serious racer. With exceptional quality, engineering and design it
offers the highest performance and responsive handling. The Cyclone PRO has been upgraded with a two speed
automatic gearbox and tough aluminium shock absorbers. It also comes fully loaded with racing ball bearings
throughout instead of the standard metal bearings found in most models. Ball bearings give a quicker and smoother
ride and most other manufacturers charge at least £30 for this upgrade.


Of course the model also boasts the high build quality of all Acme models with a strong alloy chassis, shaft driven
4WD system and sealed radio compartments. The Cyclone PRO comes fully built with radio control included - just
add fuel and a glow start.


Acme Tech models now come with high quality .18 Team Infinity engines. Team Infinity engines are made in
Japan and feature a simplified carb that makes them the easiest to start and most reliable engines on the market.


SPECIFICATIONS:
Width: 199MM
Height: 115MM
Track: 185MM
Length: 380MM
Wheelbase: 259MM
Gear ratio: 5.69:1 (High), 7.83:1 (Low)
Engine: New Team Infinity 18
Wheel dia.: 64*26MM
Ground clearance: 8.5MM


FEATURES:
1/10 Scale nitro powered car
4WD Shaft drive system
Fully ball raced system
Infinity .18 pull start engine
Aluminium adjustable oil-filled shocks
Two speed automatic gear box
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted and cut body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£149.49




                                                                                                        Page 54/219
                                                                                                        08/2011




GS Racing 1:9 Scale Mitsubishi Pajero Conqueror Nitro RallyTruck
Model: GSC5315APF


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. This is a real innovation from GS and is a Mitsubishi Shogun/Pajero based 1/9th
Scale 4WD truck - ready to conquer the land!


This model uses GS's vast experience of making buggies and touring cars to produce something special - an
rc model that performs as well off road as it does on tarmac, just like the real thing.


Using the best dust proofing technology available throughout its design (from the Shadow SB1 Buggy), with a new
front and rear suspension system, plus the Team Infinity .18 nitro engine, this car is able to meet pretty much any
terrain you can throw at it, be it the street, or rugged trails.


The Conqueror Is feature packed including the all new designed GS rally car suspension system with front and
rear sway bar systems fitted. The differentials use the highest quality "Competition Line" range of race
gears and the pinion gear is a high performance type made of a powder metallurgy steel. The crown gear is of the
same high specification. It is fitted with pre-glued Mitsubishi Pajero tyres; has 4WD transmission with a centre
slipper clutch and to get all these special components moving it is fitted with the Team Infinity .18 engine with tuned
exhaust.


Equipped with 2.4G radio gear with LCD readout on the transmitter and a GS racing nitro starter set included., this
really is a top pro-spec rc model.


The Model comes boxed as follows:




100% Assembled


GS nitro starter tool kit included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features:
100% factory assembled 1/8th scale race buggy
Over 50% compatible with Shadow SB1 series Buggy




                                                                                                          Page 55/219
                                                                                                        08/2011




Fully fitted with precision ball bearings
Tuned rear exhaust system
Powerful Team Infinity .18 Pull Start Engine
GS 1/9th Pre-glued rally wheels on Mitsubishi Pajero Wheels
Pre-painted and trimmed Kom Designs body with decals
Front Universal driveshafts
All new design GS rally car suspension system
Front and rear sway bar system
GS "Competition Line" high quality race differential gears
GS high performance crown gear and pinion gear made of powder metallurgy steel
4WD transmission with center slipper clutch


Specifications:
Length: 490mm
Width: 230mm
Height: 210mm
Ground clearance: 29mm
Wheelbase: 304mm
Track: F: 198mm R: 200mm
Weight: 2350g
2.4G radio gear
Gear ratio: C47/13T, F/R: 39/11T


Required To Use:
12 x AA Batteries
Model Fuel
£259.49




GS Racing Shadow SB1 Nitro Rc Buggy
Model: GSC5215


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. The Shadow is GS Racing's brand new 1/10th nitro buggy that is perfect for
both beginner and advanced racers.


The newly designed front and rear aluminium shock towers plus long travel suspension system greatly upgrades
the durability and handling. No e-clips are used in the suspension system so the car can be maintained and
adjusted easily. The car is fitted with the powerful Team Infinity .18 rear exhaust engine and with a tuned pipe for
optimum nitro performance. The body is perfectly balanced and the weight is distributed evenly throughout the




                                                                                                         Page 56/219
                                                                                                       08/2011




chassis giving stability and control. This model has a high specification and packed with features to keep even the
most experienced basher entertained. Fitted with off road tyres and wheels to enhance the stability when driving at
speed, this buggy is a superb way of finding out for yourselves the world of 1/10th scale buggy fun.


Equipped with 2.4G radio gear with LCD readout on the transmitter and a GS racing nitro starter set included, this
really is a top pro-spec radio controlled buggy.


The model comes boxed as follows:




100% Assembled


GS nitro starter tool kit included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features:
100% factory assembled 1/10th scale race buggy
Over 50% compatible with Shadow ST1R series truck
Fully fitted with precision ball bearings
Unique rear exhaust system
Powerful Team Infinity .18 Pull Start Engine
Pre-glued off road tyres on GS super buggy wheels
Pre-painted and trimmed Kom Designs body with decals
Front universal driveshafts
Long travel, coil over, impact absorbing oil filled shocks.
4WD transmission with center slipper clutch
GS high performance crown gear and pinion gear made of powder metallurgy steel
GS "Competition Line" high quality race differential gears


Specifications:
Length: 450mm
Width: 326mm
Height: 150mm
Ground clearance: 50mm
Wheelbase: 296mm
Track: F/R 265mm
Weight: 2350g
2.4G radio gear




                                                                                                       Page 57/219
                                                                                                          08/2011




Engine: Infinity .18 rear exhaust


Required To Use:
12 x AA Batteries
Model Fuel
£229.49




GS Racing ST1 1/10 Nitro Radio Controlled Truggy
Model: GSC5100PT1


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. If you are looking for the perfect 1/10th scale off road nitro vehicle with the
performance of more expensive race trucks - then you've found it! The Shadow ST1 is the perfect truck for
you!


The Shadow ST1 comes packed with features such as 4WD, centre slipper clutch, oil filled shocks, race inspired
tyres and wheels, powerful rear exhaust engine, 2.4G radio gear, easy access components, and it's all topped
off with a Kom Designs pre-painted body shell.


The all new GS Shadow ST1 Nitro Truck, designed and built ground up for unmatched performance and fun; it is
all about satisfying your need for fun and speed in the dirt and on the street. All four corners feature extra thick and
highly durable suspension arms. The arms feature captured hinge pins, a feature found usually only on more
expensive race kits. Long travel, coil over, impact absorbing oil filled shocks provides unbeatable rough terrain
handling. Receiver and battery are sealed and protected from the elements inside the low profile radio box. The
steering servo is laid down for lower centre of gravity.


The 4wd transmission is built around an adjustable dual disk slipper clutch equipped centre spur gear. Front and
rear sealed gear differentials provide the ultimate in traction and stability. Multiple shock mounting locations are
standard, and ride height adjustments are a breeze. The car is fitted with the powerful Team Infinity .18 rear
exhaust engine and with a tuned pipe for optimum nitro performance.


The body is perfectly balanced and the weight is distributed evenly throughout the chassis giving stability and
control. This model has ample specification and features to keep even the most experienced basher entertained!
Equipped with 2.4G radio gear and with LCD readout on the transmitter with a GS racing nitro starter set included.,
this really is a superbly spec'd truck for the money!


The model comes boxed as follows:




                                                                                                           Page 58/219
                                                                  08/2011




100% Assembled


GS nitro starter tool kit included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features:
100% factory assembled 1/10th scale truck
Over 50% compatible with Shadow ST1R series truck
Fully fitted with precision ball bearings
Tuned .18 exhaust system
Powerful Team Infinity .18 Pull Start Engine
Pre-glued off road tyres on GS super truggy wheels
Pre-painted and trimmed Kom Designs body with decals
Front Universal driveshafts
Long travel impact absorbing oil filled shocks
4wd transmission with centre slipper clutch
Front/rear sealed gear diffs
Ultra thick and durable suspension arms with capture hinge pins
Low profile radio tray
Taiwan high quality build and components


Specifications
Length: 430mm
Width: 330mm
Height: 155mm
Ground clearance: 28mm
Wheelbase: 295mm
Track: F/R 265mm
Weight: 2213.8g
2.4G radio gear
75cc fuel tank


Required To Use:
12 x AA Batteries
Model Fuel
£229.49




                                                                  Page 59/219
                                                                                                        08/2011




GS Racing Vision Pro RTR Nitro RC Car 2.4G
Model: GSC4182


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. The Vision Pro is the top of the range 1/10th nitro car based on the standard
Vision but with many performance upgrades pre-installed.


Built on the success of the Vision EVO RTR, GS have added a higher level of specification to these touring cars.
The transmission, suspension and all mechanical components have been strengthened and re-engineered to a
PRO level. The Vision is equipped with a 4mm 7075 aluminium alloy chassis, competition shocks and swaybar
system. The newly added aluminium two speed gear set makes this car very fast and reliable. Other than the full
list of features below, the Vision Pro is packing a CNC lightened chassis; aluminium shock bodies with an
adjustable damping system; front and rear sway bars; lightened aluminium wheel hub; and an aluminium 2 speed
gear ratio system. The quality of these models has to be seen to be believed, but these photographs show the
attention to detail in the shells and also the chassis.


The Vision Pro comes complete with a powerful Team Infinity .18 engine, 2.4GHz radio equipment, nitro starter set
and choice of detailed licensed body shell.


The Vision Pro comes boxed as follows:




100% Assembled


GS nitro starter tool kit included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features:
Fully adjustable pivot ball suspension
Finished pre-mounted body
GS Racing camber clip system
75cc fuel tank with splash guard
2.4G Radio system included
Sealed radio box with transponder mount
GS fuel bottle and glowstarter included




                                                                                                         Page 60/219
                                                                                                         08/2011




Powerful nitro engine
7075 aluminium alloy chassis – for lightness and strength
Aluminium shock bodies with adjustable dampening system
Front and rear sway bar system
Lightened aluminium wheel hubs
Aluminium 2 speed gear box system
GS Racing camber clip system


Specifications:
Length: 380mm
Width: 198mm
Height: 104mm
Ground clearance: F/R: 4.5/5.5mm
Wheelbase: 260mm
Track: 172mm
Gear ratio: 11.69:1
Weight: 1700g
Tank: 75cc
Radio equipment: 2.4GHz with LCD display
Engine: Team Infinity .18 Nitro


Required To Use:
12 x AA Batteries
Model Fuel
£214.49




HSP Gladiator 1/10th Scale Nitro Off Road Truggy
Model: H94110


This is the stunning looking and even better performing HSP nitro radio controlled truggy. The fusion of buggy and
truck in to one awesome set of wheels. This truggy is extra tough and a great off road performer, it can still stand its
ground on the road too! The Gladiator is feature packed making it one of the top spec truggies on the market and
the .18 engine, and two-speed automatic gearbox makes it extremely quick. The Gladiator comes fully built with
everything included apart from fuel, glow start (both optional below) and 12 normal AA batteries.


It has some special features that add to the quality of this model. For example the front and rear diffs are not only
assembled from high quality bevel gears, but they have been designed for easy user maintenance. Likewise the
disc brake system allows users to quickly change the brake pads and so ensuring you'll always have optimum
braking power. If you don't quite stop in time, there's bumpers front and back that'll take some of
the sting out of the impact.


This version of this nitro radio controlled truggy has been upgraded with high quality Team Infinity engines.




                                                                                                          Page 61/219
                                                                                                         08/2011




Team Infinity engines are made in Japan and feature a simplified carb that makes them the easiest to start and one
of the most reliable engines on the market. Usually these models come with engines made in Taiwan or China that
you will see being offered by other model shops selling these but from our experience we have found the extra few
pounds for a Japanese engine is well worth it for the difference in quality and performance.


We have specified this upgraded Gladiator so that it is kitted out with traditional stick type controllers whereas
normally they come with the wheel type controllers. This is a personal choice of what you are more comfortable
with.


Features
Four wheel drive system
Hi-spec easy maintenance diffs
6061/T6 anodized aluminum chassis
13.8g lightweight aluminum flywheel
Disc brake system
Extra large 75cc leak proof fuel tank
Hard wearing truggy tyres
Top quality 1/10th scale wheel rims
Oil filled shock absorbers
High flow dual foam element air filter
5-position adjustment on tower
Camber, toe in/out adjustment
3mm shock towers, oil-pressured
Composite lower arms, C-hub front arms, and turnbuckle upper links
Front and rear bumpers


Specifications
Length: 400mm
Height: 160mm
Width: 300mm
Wheelbase: 275mm
Gear Ratio 2 Speed: 5.84:1(H) 8.58:1(L)
Ground Clearance: 35mm
Wheel Diameter: 105mm
Radio: Stick type Engine: Infinity .18


Required To Use
12 x AA Batteries
Model Fuel
Glowstarter
£149.49




                                                                                                           Page 62/219
                                                                                                                              08/2011




Nitro RC Cars -/- 1:16 RTR Nitro RC Cars




                     NB16 Nitro Radio Controlled Buggy
                     Model: A3007T


                     The all new Acme mini nitro cars - Half the size but twice the fun! All the features of a full sized model packed into
                     a super mini, super cute little monster! These nitro cars are so much fun whizzing round your garden or take them
                     down to your local club to wow the crowd with something they have never seen before.


                     No radio controlled car collection is complete without one of these. The NB16 nitro cars come fully built with all
                     radio equipment included. If you want a model that you can race both seriously at tracks but also have some fun
                     with at home then this is the model to go for.


                     The NB16 comes fully built with transmitter included. All that you need to be up and running is fuel, a glow start
                     (both available below as options), 4 AAA batteries for the receiver and 8 AA batteries for the transmitter (these are
                     standard sized batteries available from supermarkets etc.)


                     SPECIFICATIONS:
                     Width: 187MM
                     Height: 108MM
                     Track: 126MM
                     Length: 232MM
                     Wheelbase: 177MM
                     Gear ratio: 11:1
                     Engine: New Powerful Toki 05 nitro engine
                     Wheel dia.: 70mm
                     Ground clearance: 18MM


                     FEATURES:
                     Fully assembled
                     Oil filled shocks
                     Front & rear sway bar system
                     4WD shaft driven system
                     Aluminium oil-filled shocks
                     Bevel gear differentials
                     Powerful .05 engine
                     High torque mini servos
                     AAA battery case for receiver
                     38cc fuel tank
                     14pcs ball bearings
                     Hop-ups in alum coming soon
                     27MHZ CE approved Radio system with changeable crystals.




                                                                                                                               Page 63/219
                                                                                                          08/2011




REQUIRED TO USE:
4 x AAA Batteries
8 x AA Batteries
Model Fuel
Glowstarter
£114.49




NB16-T Nitro Radio Controlled Truggy
Model: A3010T


The NB16-T is a mini nitro car with a big powerful punch. Small enough for back yard racing but powerful enough
to outrun a lot of full scale models! All the features and more that you would expect from a full size nitro car have
been squeezed into this little monster truck. The result is a serious bit of kit for major back garden fun.


Mini nitro models have been very popular since Acme released the world's first mini nitro car in 2006 because
unlike the original sized models you do not need a field or track to race them on. If you want a model that you can
race both seriously at tracks but also have some fun with at home then this is the model to go for.


SPECIFICATIONS:
Width: 208MM
Height: 108MM
Track: 208MM
Length: 297MM
Wheel base: 191MM
Gear ratio: 11.2:1
Engine: Toki 06 Size
Wheel dia.: 73x39.5MM
Ground clearance (F/R): 19MM
Chassis: 2mm-thick hard anodized alum.
Drive: Four wheel shaft drive
Fuel Tank: 38cc
Ball Bearings: Full set
Shocks: Four oil filled shocks
Shock towers: Anodized aluminum
Clutch Bell: Steel
Differentials: Bevel gear type
Brakes: Metal disc brake
Clutch shoes: 2 shoe race spec
Exhaust: Alloy manifold and tuned plastic pipe
Caster: Adjustable
Camber: Adjustable




                                                                                                              Page 64/219
                                                                    08/2011




Body: Pre-painted
Build : Fully built


FEATURES:
1/16 Scale mini nitro powered truggy
High quality Toki engine
Thick aluminium shock mounts
Solid steel drive cups
2 piece racing clutch
Disc brake system gives ultimate stopping power
Sealed radio box protects electronics
27MHZ CE approved Radio system with changeable frequency crystals
C-hub front and rear suspension
Front & rear differentials
Fully ball raced
Metal manifold
High torque mini servos
Fully assembled
Alum. upgrades available
Front and rear anti roll bars fitted as standard


Required To Use:
4 x AAA Batteries
8x AA Batteries
Model Fuel
Glowstarter
£129.49




                                                                    Page 65/219
                                      08/2011




Nitro RC Cars -/- 1:8 Nitro Rc Cars




                                      Page 66/219
                                                                                                        08/2011




Attacker 1/8 Nitro Rc Buggy
Model: A3017T


The Attacker is ACME's entry level to the world of 1/8 scale nitro powered model buggies. You'll find it
hard to find a fully built 1/8 buggy at this price anywhere, yet we've still spec'd this machine with
aluminium shocks and a .18 nitro engine.


It features a high downforce rear wing too as an aid to grip at speed. Designed as an off-road buggy, it has fully
functional suspension and will run on a variety of terrains. This buggy has everything you need to introduce you to
the thrills and spills of 1/8 scale radio controlled cars.


FEATURES:
1/8 Scale Gas Powered Car
Fully Assembled
4wd Shaft Drive System
W/.18 Easy-To-Start Pull Start Powerful Engine
Oil-Filled Aluminium Shocks
Single Speed
Front And Rear Bevel Differentials
W/125cc Fuel Tank
Quicker Steering And Fast Response
Low Centre Of Gravity Design


SPECIFICATIONS:
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3300g
Transmitter: 2 channel


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£169.49




                                                                                                         Page 67/219
                                                                                                         08/2011




Barbarian NXL 1/8 Scale RC Nitro Monster Truck 2.4G
Model: A3019T


The ACME Barbarian NXL is a fully built, fully featured, top of the range 1/8 scale off-road monster truck, and
comes with many feature enhancements to make this a superb nitro model. This is the Pro version and it is fitted
with high quality components - such as an aluminium tuned pipe, is 4WD and equipped with a powerful .25 nitro
engine!


It has huge 16mm super big bore oil aluminum shocks, designed to smooth the ride as it speeds over the terrain of
your choice; these in turn are secured to the aluminium chassis by a hardened aluminium shock tower. Couple this
with the ultra-strength front and rear bumpers and you have a model that should withstand pretty much everything
you can throw at it!


Although no model is indestructible so we stock a full range of spares and upgrades to enhance and repair your
model should a mishap occur!


The Barbarian NXL is built using advanced components and innovative engineering to get the best performance
out of your package. It has a newly developed C-hub steering system, where the king pin axis extends to the wheel
centre; this feature improves steering performance. It has a specially designed suspension system, with twin
adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving mode.


Part of its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting
with grip and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks
associated with monster truck use. It has been engineered with a gear ratio that offers both superb acceleration
and a high top speed. Not only this but the gearbox consists of all steel gear and is of a pinion design which makes
it easier to maintain and repair.


The barbarian NXL is built around a narrow, but solid aluminum chassis; this centralised chassis design allows
quicker steering and faster response. The blows are cushioned by the 16mm super big bore oil shocks, see
pictures.


It also has fully adjustable sway bar ball cups, for customisable and better traction and stability, depending on
whether you're speeding across tarmac or roughing it over gravel and tougher terrain. Additionally the front
bumper is built so that it moves backwards on impact, this can prevent the chassis from becoming distorted or even
broken when landing after jumps. All the linkages can be set with adjustable turnbuckle.


Its 1/8th scale length of 550mm and 28mm of ground clearance mean this nitro truck is a real big boys toy - you
will enjoy this!


Features
4WD, RTR, nitro powered monster truck;
Newly C-hub steering system. King pin axis extends to the wheel centre, this improves steering performance;
Newly developed suspension system, twin adjustable rear suspension modes for flexible driving mode &
smooth driving mode;
New lightweight ultra-compact gear box with a low centre of gravity and high durability;
Front bumpers allow backward movement, this protects chassis from crash and jump impact;




                                                                                                          Page 68/219
                                                                                                        08/2011




6061-T6 solid aluminum chassis, centralised chassis design to allow quicker steering and fast response;
Newer gear ratios, offers faster acceleration and higher speed;
Easy to maintain and repair pinion gearbox;
16mm super big bore oil aluminum shocks;
All steel gears, machined motor gear, machined diff. gear;
Fully adjustable sway bar ball cups;
Hardened alum. shock tower;
Ultra-strength front and rear bumper;
High torque steering 9kg servo with metal gear;
Model is ball raced throughout


Specifications
Height: 190mm
Length: 550mm
Width: 310mm
Wheel base: 320mm
Track F/R: 320mm
Ground clearance: 28mm
Gear ratio: 8.95
Weight: 4300g


Required To Use
12 x AA Batteries
Model Fuel
Glowstarter
£239.49




GS Racing CL-1 1/8th Nitro Rc Rallycross Buggy
Model: GSC3010APF


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. This CL-1 is GS Racing's top of the range RTR rally cross buggy and comes
with GS Racing's latest technology and upgrades pre-fitted.


The CL-1 is designed for those wanting ultimate performance with the luxury of a RTR model. Without any
modifications out of the box the buggy can be raced at a national level and will not let you down. The features list
goes on and on and as well as all the features you would expect from a top of the range pro model there are also
extra features found exclusively on the GS range such as the super sensitive suspension and the smallest
differential system to be found on any buggy of this scale. The CL-1 is used by professional racers around the




                                                                                                         Page 69/219
                                                                                                      08/2011




world and can compete with any model out there. Comes with a GS racing nitro starter set included.


Powered by a big block .25 Team Infinity rear exhaust nitro engine this buggy is fierce and fast. The engine
provides smooth, rapid acceleration and the torque needed for jumping and controlled fast cornering. Fitted with
spider tyres and dish wheels to enhance the stability when driving at speed, this buggy is perfect for someone
looking to upgrade their model to the highest level or for someone who wants to jump straight in with a highest
performance model.


The gorgeous pre-painted body, which comes with the striking stickers included, was designed by US top 10 driver
Marty Kom. When the CL-1 hits the track all eyes will be on you.


The model comes boxed as follows:




100% Assembled


GS nitro starter set included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features
100% factory assembled 1/8th scale race buggy
Full range of options/upgrades available
Fully fitted with precision ball bearings
Tuned exhaust system
Powerful Team Infinity .25 Engine
Pre-glued GS Road Spider tyres on GS dish wheels
Front universal drive shafts
Pre-painted and trimmed Kom Designs body with decals


Specifications
Length: 520mm
Width: 310mm
Height: 220mm
Ground clearance: 75mm
Wheelbase: 325-330mm
Track: F:306mm, R:306mm
Gear ratio: C:44/13T, F/R 38/11T
Weight: 3450g




                                                                                                       Page 70/219
                                                                                                        08/2011




2.4G radio gear


Required To Use
12 x AA Batteries
Model Fuel
£299.49




GS Racing Storm CLX Pro 1/8th Nitro Rc Buggy KIT
Model: GSC8001U


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. This is the CLX Pro kit for experienced racers looking to upgrade to a model that
can win national rally-cross races.


Leaving behind old traditions and taking buggy design to a new and higher standard, is the Storm CLX competition
1/8th off road nitro buggy. Using the highly successful Storm CL-1 Advanced Plus as the foundation, GS has
created a lighter, stronger and more nimble buggy. Durability, balance, quality and weight: In each area
improvements have been made resulting in a buggy that turns faster lap times yet is consistent and easy to drive.


The kit comes with loads of GS Factory Team optional parts that add strength and enhanced performance to meet
the hardest competition head-on. The CL-1 Pro kit offers the new and best parts in one package to create the
ultimate racing machine. Ferodo brake pads, zero bump steer, double stage air filter, captured hinge pins, the
features just go on and on.


This is a PRO SPEC chassis and will give you the leading edge in races.


Features
Adjustable wheelbase with long travel suspension front and rear
Ferodo brake pads with vented brake discs
Zero bump steer 20 degree C-hub/knuckles
Compact and balanced chassis layout
Forward mounted double stage air filter and integrated splash guard
Front filter and PT mount included
Captured hinge pin design front and rear. All arms can be used left or right
Adjustable front upper and lower arm position settings
Easy access radio box with optional plate if on/off switch is not used roll center
Rubber sealed bearings throughout
Adjustable Ackerman and ball bearing supported bell cranks
7075 CNC lightweight narrow chassis with steel droop stops




                                                                                                         Page 71/219
                                                                                                        08/2011




Lightweight 10T hardened helical cut pinion gears
Full set of lightweight CV driveshafts standard
Hard anodized wheel nuts with covered wheel nuts standard
Lightweight outdrives and lightweight 40T conical gears mated to small diameter differentials
Lightweight 42T spur gear, 2 piece center diff mount with off center brake cams and integrated brake
disc guides
Aluminum 3 shoe clutch with 5x11mm bearing equipped 16T bell
16mm Aluminum threaded shocks with optional springs and pistons standard


Specifications
Length: 510mm
Height: 200mm
Ground clearance: 60mm
Wheelbase: 326-330mm
Track: F:305mm, R:307mm
Gear Ratio: 10.5:1 (F/R 40/10T)
Race Weight: 3300g


Required To Use
This is a kit only. Radio gear, electronics, engine etc are all required.
£349.49




GS Racing Storm Evo 25 1/8th RC Nitro Buggy
Model: GSC2025CPF


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. The first of the 1/8th lineup is this striking GS Racing Evo 25.


This fantastic RC Buggy has all the features you would expect from a top of the range 1/18th buggy and 75% of
the parts are compatible with the rest of the GS 1/8th buggies. The Evo 25 has inherited the super sensitive
suspension from its stablemates plus the smallest differential system to be found on any buggy of this scale. These
two features alone give this buggy the greatest accelerating and handling performance possible. In addition the
suspension linkages are all fully adjustable allowing you control over the handling so that it can be configured for
different tracks and racing styles.


Powered by a big block .25 Team Infinity rear exhaust nitro engine this buggy is fierce and fast. The engine
provides smooth, rapid acceleration and the torque needed for jumping and controlled fast cornering.


Fitted with spider tyres and dish wheels to enhance the stability when driving at speed, this buggy is a superb way




                                                                                                          Page 72/219
                                                                                                          08/2011




of finding out for yourselves the world of 1/8th scale buggy fun.


The Evo 25 is highly configurable and as you would expect from a buggy of this level, the camber, toe in, wheel
base, suspension and even the front tracking can all be configured to give you the edge against the competition
when racing.


Comes with GS racing nitro starter set included and equipped with 2.4G radio gear with LCD readout, this really is
a top pro-spec rc buggy. Front universal drive shafts, 3 shoes racing clutch, steel spur gear, the features list just
goes on and on.


The model comes boxed as follows:




100% Assembled


GS starter set included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features
100% factory assembled 1/8th scale race buggy
Over 75% compatible with Storm series buggies
Full range of options/upgrades available
Fully fitted with precision ball bearings
Tuned .25 exhaust system
Powerful Team Infinity .25 Engine
Pre-glued GS Road Spider tyres on GS dish wheels
Front universal drive shafts
Pre-painted and trimmed Kom Designs body with decals
Low centre of gravity
Dust guard front C-hub
125cc fuel tank with filter and adjustable pressure fitting
Adjustable front/rear toe in and camber
Front, centre and rear differentials
3 shoe clutch system
Adjustable wheelbase
Heavy duty suspension arms
4WD shaft driven transmission
46 tooth spur gear




                                                                                                           Page 73/219
                                                                                                        08/2011




Specifications
Length: 490mm
Height: 182mm
Ground clearance: 22mm
Wheelbase: 320-325mm
Track: F:256mm (adjustable), R:251mm
Tyres: 116mm x 42mm
Weight: 3350g
Radio: 2.4G
Fuel tank: 125cc


Required To Use
12 x AA Batteries
Model Fuel
£279.49




GS Racing XUT II Pro 1/8th Nitro Radio Controlled Truggy Kit
Model: GSC3070


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. This is the XUT II Pro kit for experienced racers looking to upgrade to a model that
can win national truggy races.


The GS XUT II pro kit comes with the best of the GS optional parts that strengthen the structure and enhance the
performance in order to meet the hardest competition head on. The chassis offers the lowest centre of gravity in a
1/8th truggy, with the center of weight mass concentrated as close to the center line as possible.


The brand new chassis greatly improves the durability and drive. The kit adds more things like front and rear 3mm
7075 T6 CNC lightened shock towers, hard coated aluminium chassis, long stroke racing shock springs, 5mm ultra
light steering plate and low profile servo tray with lay down steering servo mounting.


This is a PRO SPEC chassis and will give you the leading edge in races.


Features
Pro Spec 1/8th Scale Race Truggy kit
Pre-fitted with GS optional upgrade parts
Full Precision Engineered Ball Bearings
GS Dish Truggy Wheels with GS Cubic Truggy Tires




                                                                                                         Page 74/219
                                                                                                         08/2011




Full CVD drive shafts
Front and rear long stroke racing shocks
New lightened chassis
Adjustable 5mm steering plate with ball bearing set
Aluminium wing joint set
GS High performance aluminium 35mm fly wheel
GS professional fuel filter set
Lightened front/rear diff. outdrive
Front and rear aluminium chassis stiffener


Specifications
Length: 530mm
Width: 420mm
Height: 215mm
Ground Clearance: 75mm
Wheelbase: 370-375mm
Track: F/R 330-360mm
Gear Ration: C:58/13T, F/R:38/11T
Weight: 4130g


Required To Use
This is a kit only. Radio gear, electronics, engine etc are all required.
£369.49




GS Racing XUT RTR 1/8th Scale Nitro RC Truggy 2.4G
Model: GSC3060APF


The international race winning GS Racing is back in the UK with their top of the range pro level series. GS Racing
are known worldwide for their cutting edge, market leading models. They are not only high performance with the
latest components and designs, but also highly reliable thanks to their high quality materials and construction in
Taiwan using only Taiwan sourced parts. The R&D team has been hard at work perfecting the brand new
range ready for the next season. Their top of the line 1/8th race ready truggy is the spectacular XUT.


This fantastic truggy is feature packed and highly configurable. As well as all the features you would expect on a
truggy of this level it also has many that are not found on even more expensive models. GS cubic truggy tyres,
aluminium 13mm big bore shocks, over sized 145cc fuel tank with splash guard, over sized inner bearings in the
front and rear hubs, the list goes on and on. The chassis offers the lowest center of gravity in a 1/8th truggy, with
the center of weight mass concentrated as close to the center line as possible.


Powered by a big block .25 Team Infinity rear exhaust nitro engine this truggy is fierce and fast. The engine
provides smooth, rapid acceleration and the torque needed for jumping and controlled fast cornering. Fitted with
pre-glued cubic tyres and dish wheels to enhance the stability when driving at speed, this truggy is perfect for




                                                                                                          Page 75/219
                                                                                                    08/2011




someone looking to upgrade to the highest level or for someone who wants to jump straight in with a highest
performance model.


The gorgeous pre-painted body, which comes with the striking stickers included, was designed by US top 10 driver
Marty Kom. The truggy is finished with a high down force GS Eagle wing and high quality 2.4Ghz radio equipment.
Whether looking to do some serious bashing or racing at a national level, the XUT can do it all. Comes with a GS
racing nitro starter set included.


The model comes boxed as follows:




100% Assembled


GS tool kit included


Pre-printed body


Decals


Manual


Full 2.4G radio equipment




Features
100% Factory Assembled 1/8th Scale Race Truggy
Over 50% Compatible with Storm CL-1 Series Buggies
Full Line of Options and Upgrade Parts Available
Full Precision Engineered Ball Bearings
Tuned .25 Exhaust System
Powerful Infinity Big Block .25 Rear Exhaust Engine with Pull Start
GS Dish Truggy Wheels with Pre-glued GS Cubic Truggy Tires
Front Universal Driveshafts
Aluminum 13mm Big Bore Oil-Filled Shocks
Pre-Painted and Trimmed Korn Designs Body with Decals
Professional 3mm Aluminum Hard-Coated Chassis
Adjustable 3mm Aluminum Steering Plate
Adjustable Servo Saver Pipe Set
145cc Big Fuel Tank
Oversized Bearings in Front and Rear Hub System


Specifications
Length: 530mm
Width: 420mm
Height: 215mm
Ground Clearance: 75mm




                                                                                                     Page 76/219
                                                                                                         08/2011




Wheelbase: 370-375mm
Track: F/R 330-360mm
Gear Ratio: C 58/13T, F/R 38/11T
Weight: 4100g


Required To Use
12 x AA Batteries
Model Fuel
£319.49




Mighty 1/8th Scale Nitro Powered Pro Rc Truggy
Model: A3018T-2PRO


The ACME Mighty is a fully built, fully featured, top of the range 1/8 scale off-road truggy, and comes with many
feature enhancements to make this great looking car not only look the part but 'be' the part! This is the
Pro version and it is fitted with high quality components, is 4WD and equipped with a powerful .25 nitro engine!


The Mighty is built using advanced components and innovative engineering to get the best performance out of your
package. It has a newly developed C-hub steering system, where the king pin axis extends to the wheel centre (see
picture above) this feature improves steering performance. It has a specially designed suspension system, with twin
adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving mode.


Part of its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting
with grip and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks
associated with buggy use. It has been engineered with a gear ratio that offers both superb acceleration and a high
top speed. Not only this but the gearbox consists of all steel gear and is of a pinion design which makes it easier to
maintain and repair.


The Mighty is built around a narrow, but solid aluminum chassis; this centralised chassis design allows quicker
steering and faster response. The blows are cushioned by the 16mm super big bore oil shocks, pictured left. The
Mighty also has fully adjustable sway bar ball cups, and a high-downforce wing for better traction and stability.


Additionally the front bumper is built so that it moves backwards on impact, this can prevent the chassis from
becoming distorted or even broken when landing after jumps. All the linkages can be set with adjustable turnbuckle.


Features
New C-hub steering;
Newly developed suspension;
Twin adjustable rear suspension;
Lightweight ultra-compact gear box;
Solid aluminum chassis;
Quicker steering and fast response;




                                                                                                          Page 77/219
                                                                                                      08/2011




16mm super big bore oil shocks;
New gear ratio;
Easy maintenance pinion gearbox;
All Steel Gear;
Adjustable Sway bar ball cups (Pro only);
High-downforce wing


Specifications
Height: 195mm
Length: 570mm
Width: 440mm
Wheel base: 355mm
Track F/R: 370mm
Ground clearance: 40mm
Gear ratio: 13.1
Weight: 3950g
Transmitter: 2 channel


Required To Use
12 x AA Batteries
Model Fuel
Glowstarter
£239.49




Warrior 1/8 Nitro Radio Controlled Buggy
Model: A3015T


The ACME Warrior is a fully built, fully featured, race ready, top of the range 1/8 scale 4WD off-road buggy, and
comes with many feature enhancements to make this great looking car not only look the part but 'be' the
part! There are few versions available and all have high quality components, and a powerful .21 nitro engine.


This model is available in two versions:




Standard Version


Pro Version




The warrior is built using advanced components and innovative engineering to get the best performance out of
your package. It has a newly developed C-hub steering system, where the king pin axis extends to the wheel centre
(see picture right) this feature improves steering performance. It has a specially designed suspension system, with




                                                                                                        Page 78/219
                                                                                                          08/2011




twin adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving mode. Part of
its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting with grip
and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks
associated with buggy use. It has been engineered with a gear ratio that offers both superb acceleration and a high
top speed. Not only this but the gearbox consists of all steel gear and is of a pinion design which makes it easier to
maintain and repair.


The Warrior is built around a solid aluminum chassis, which has a width of only 129mm; this centralised chassis
design allows quicker steering and faster response. The blows are cushioned by the 16mm super big bore oil
shocks, pictured left. The Warrior also has fully adjustable sway bar ball cups, and an adjustable high-downforce
wing for better traction and stability. Additionally the front bumper is built so that it moves backwards on impact, this
can prevent the chassis from becoming distorted or even broken when landing after jumps.


Some features are specific to the Pro version and are not found on the standard version:




The standard model uses the normal dogbone, not CVD as in the Pro;


The standard version hasn't been equipped with the Front & Rear Swaybar system;


There are only 2pcs diff.gears which on front, rear & center gear box of standard, while PRO is 4pcs;


The thickness of chassis & shock tower that on standard is 2.5mm & 3mm respectively, while the Pro is
3mm & 4mm;


The standard uses metal bearing.


All the linkages on Pro can be set with adjustable turnbuckle.




FEATURES:
New C-hub steering;
Newly developed suspension;
Twin adjustable rear suspension;
Four wheel drive
Lightweight ultra-compact gear box;
Solid aluminum chassis;
Width of only 129mm;
Quicker steering and fast response;
16mm super big bore oil shocks;
New gear ratio;
Easy maintenance pinion gearbox;
All Steel Gear;
Adjustable Sway bar ball cups (Pro only);
Adjustable high-downforce wing;




                                                                                                           Page 79/219
                                                                                                          08/2011




SPECIFICATIONS:
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3300g
Transmitter: 2 channel


Required To Use:
12 x AA Batteries
Model Fuel
Glowstarter
£189.49




Warrior 1/8 Nitro Rc Buggy - Pro Version
Model: A3015TPRO


The all new Warrior PRO is a fully built, fully featured, race ready, top of the range 1/8 scale 4WD off-road buggy,
and comes with many feature enhancements to make this great looking car not only look the part but 'be'
the part! There are few versions available and all have high quality components, and a powerful .21 nitro engine.


The warrior is built using advanced components and innovative engineering to get the best performance out of
your package. It has a newly developed exclusive C-hub steering system, where the king pin axis extends to the
wheel centre (see picture right) this feature improves steering performance. It has a specially designed suspension
system, with twin adjustable rear suspension modes which allows for a flexible driving mode and a smooth driving
mode.


Part of its performance is due to the lightweight ultra-compact gear box; this has a low centre of gravity, assisting
with grip and control. The gearbox is also built to be highly durable, so that it can cope better with the hard knocks
associated with buggy use. It has been engineered with a gear ratio that offers both superb acceleration and a high
top speed.


Not only this but the gearbox consists of all steel gear and is of a pinion design which makes it easier to maintain
and repair.


The Warrior Pro is built around a solid aluminum chassis, which has a width of only 129mm; this centralised
chassis design allows quicker steering and faster response. The blows are cushioned by the 16mm super big bore
oil shocks, pictured left. The Warrior also has fully adjustable sway bar ball cups, and an adjustable high-down
force wing for better traction and stability. Additionally the front bumper is built so that it moves backwards on
impact, this can prevent the chassis from becoming distorted or even broken when landing after jumps.




                                                                                                           Page 80/219
                                                                                                   08/2011




Some features are specific to this Pro version and are not found on the standard version:




The standard model uses normal dogbones, not CVDs as in this Pro


This Pro version has been equipped with a front and rear sway bar system


The standard only has 3 diff. gearboxes on the front, rear & center gear while the Pro has 4


The thickness of the chassis and shock tower on the standard is 2.5mm & 3mm respectively while the Pro is
a thicker 3mm & 4mm


The standard uses metal bearing whereas this Pro used ball raced bearings


All the linkages on the Pro can be set with the adjustable turnbuckles




Features
New C-hub steering;
Newly developed suspension;
Twin adjustable rear suspension;
Four wheel drive
Twin brake system
Lightweight ultra-compact gear box;
Solid aluminum chassis;
Width of only 129mm;
Quicker steering and fast response;
16mm super big bore oil shocks;
New gear ratio;
Easy maintenance pinion gearbox;
All Steel Gear;
Adjustable Sway bar ball cups (Pro only);
Adjustable high-downforce wing;


Specifications
Height: 185mm
Length: 505mm
Width: 310mm
Wheel base: 315~320mm
Track F/R: 310mm
Ground clearance: 30mm
Weight: 3300g
Transmitter: 2 channel


Required To Use




                                                                                                   Page 81/219
                    08/2011




12 x AA Batteries
Model Fuel
Glow starter
£214.49




                    Page 82/219
                                                                                                                               08/2011




Nitro RC Cars -/- Unbuilt Nitro Cars




                      Condor Self Build Nitro RC Buggy Kit
                      Model: A3001


                      Forget lego etc, these self build kits provide hours of fun and when they are finished they are actually fun to use!
                      For the hours of use and enjoyment you will get from first building and then racing them these kits are amazing
                      value for money. If you are new to nitro rc cars then buying a self build kit is a great way to learn about the hobby
                      and see how they work before going out and racing them. We sell some of these models to schools as they are
                      educational and a great introduction to mechanics and engineering. There is no other product on the market that
                      gives such a complete all in the box kit like this.


                      Unlike other self build kits on the market that only include the basic chassis and none of the electronics etc, these
                      kits include everything needed to complete and even the tools you need to build them! Team Infinity 18 engine,
                      pistol type radio equipment, grease, oil etc - everything is there. Construction will take around 8 - 12 hours on
                      average and is recommended for ages 14+.


                      The most important thing with a self build kit is the instruction manual. With these kits the manual has been given a
                      lot of attention to ensure a smooth construction. This is a not a few pages pamphlet like with some other kits, this is
                      a thick manual that was designed and written in the UK to make sure nothing was lost in translation at the factory.
                      Construction is broken down into many stages with each corresponding stage's parts packaged separately.
                      The steps are clearly shown using CAD 3D images with every part labeled individually.


                      The end result is the Condor off road buggy. A highly capable off road model that features a strong alloy chassis,
                      shaft driven 4WD system, oil filled shocks, front and rear differentials and sealed radio tray. The Condor is powered
                      by a Japanese Team Infinity size 18 engine that rockets the model to over 40mph. The buggy can be upgraded
                      with a range of performance hop ups available from our site and you can even fit a two speed gearbox to make it
                      even quicker!


                      Features:
                      1/10 Scale nitro radio controlled buggy
                      4WD Shaft drive system
                      Infinity powerful .18 pull start engine
                      Oil-filled shocks
                      Front and rear bevel differentials
                      75CC Fuel tank
                      Metal disc brake system
                      Pre-painted body shell
                      Sealed box for protecting receiver system
                      High quality 27MHZ CE approved Radio system with changeable crystals.


                      Specifications:




                                                                                                                                Page 83/219
                                                                                                         08/2011




Width: 267MM
Height: 155MM
Track: 240MM
Length: 430MM
Wheelbase: 280MM
Gear ratio: 8.35:1
Engine: Team Infinity .18
Wheel dia.: 88*34MM(FRONT); 88*41MM(REAR)
Ground clearance: 27MM


Required to use:
13 x AA batteries for radio equipment and Fuel
£139.49




Cyclone Self Build Nitro RC Car Kit
Model: A1001


Forget lego etc, these self build kits provide hours of fun and when they are finished they are actually fun to use!
For the hours of use and enjoyment you will get from first building and then racing them these kits are amazing
value for money. If you are new to nitro rc cars then buying a self build kit is a great way to learn about the hobby
and see how they work before going out and racing them. We sell some of these models to schools as they are
educational and a great introduction to mechanics and engineering. There is no other product on the market that
gives such a complete all in the box kit like this.


Unlike other self build kits on the market that only include the basic chassis and none of the electronics etc, these
kits include everything needed to complete and even the tools you need to build them! Team Infinity 18 engine,
pistol type radio equipment, grease, oil etc - everything is there. Construction will take around 8 - 12 hours on
average and is recommended for ages 14+.


The most important thing with a self build kit is the instruction manual. With these kits the manual has been given a
lot of attention to ensure a smooth construction. This is a not a few pages pamphlet like with some other kits, this is
a thick manual that was designed and written in the UK to make sure nothing was lost in translation at the factory.
Construction is broken down into many stages with each corresponding stage's parts packaged separately.
The steps are clearly shown using CAD 3D images with every part labeled individually.


The end result is the Cyclone racing car. A seriously quick model that features a strong alloy chassis, shaft driven
4WD system, oil filled shocks, front and rear differentials and sealed radio tray. The Cyclone is powered by a
Japanese Team Infinity size 18 engine that rockets the model to over 40mph. The car can be upgraded with a
range of performance hop ups available from our site and you can even fit a two speed gearbox to make it even
quicker!


Specifications:




                                                                                                          Page 84/219
                                                                        08/2011




Width: 199MM
Height: 115MM
Track: 185MM
Length: 380MM
Wheelbase: 259MM
Gear ratio: 8.35:1
Engine: New Powerful Team Infinity 18
Wheel dia.: 64*26MM
Ground clearance: 8.5MM


Required to use:
13 x AA batteries for radio equipment and Fuel


Features:
1/10 Scale nitro powered car
4WD Shaft drive system
Japanese high quality pull start engine
Oil-filled shocks
Powerful .18 engine
Front and rear bevel differentials
75CC Fuel tank
Metal disc brake system
Pre-painted exclusive body shell
Sealed box for protecting receiver system
High quality 27MHZ CE approved Radio system with changeable crystals.
£134.49




                                                                        Page 85/219
                                                                                                                               08/2011




RC Aeroplanes -/- 4CH Stunt Planes




                    Accipiter Badius 4CH Electric RC Brushed Plane
                    Model: G503


                    Accipiter Badius is the latin name of a species of raptor, a bird of prey known for its fast manoeuvring ability, and
                    this naming should give a clue as to the capabilities of this plane. You can tell by looking at it, that it has been
                    designed with aerobatics in mind!


                    We've specified this plane with the 35Hz controller and brushed motor options, making it an affordable entry
                    level outfit, ideal for someone with some flying experience wanting to buy their first aerobatic plane. Additionally the
                    Accipiter Badius is almost ready to fly straight from the box with all its electronic components pre-installed at the
                    factory. Within a few minutes of opening the box, you can have this plane powering across the sky.


                    The controller gives the plane a good 500m range and you can enjoy around fifteen minutes flying from one charge
                    of the battery.


                    This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
                    included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
                    These steps should take around 30 minutes to complete.


                    Features
                    4 CH Full RC - Aileron, Elevator, Rudder, Throttle
                    Full aerobatic characteristics
                    Ready to Fly in Just Minutes!
                    Tough and lightweight
                    Pre-installed Electronics
                    Suitable for intermediate and expert pilots


                    Specifications
                    Length: 900mm
                    Wing span: 900mm
                    Wing area: 13.8dm sq
                    Weight: 380g
                    Wing loading: 27.5g/dm sq
                    Battery: Ni-MH 8.4V-600mAh
                    Power: 370 brushed motor
                    Control: 4 ch radio system
                    3 mini servos and ESC
                    Range: 500m
                    Flying time: approx 15 minutes




                                                                                                                                 Page 86/219
                   08/2011




Required To Use
8 x AA Batteries
£69.99




                   Page 87/219
                                                                                                         08/2011




Extra 330 4CH Brushless Aerobatic RC Plane 2.4GHz
Model: DY8923


Fly in 3D and perform aerobatic manoeuvres with the new Dynam Extra 330. This 4 channel plane has been
designed specifically with acrobatic flight in mind to make pulling off stunts and tricks much easier. It’s
almost ready to fly with everything included and will only take minutes to complete the minor assembly needed.
This plane is designed with meticulous care and will not disappoint. It even comes with an aeroplane pilot inside the
cockpit!


To perform some aerobatic stunts a lot of power is required but that is no problem for the Extra 330 as it is fitted
with a brushless motor and ESC. The combination of this along with the high capacity li-polymer rechargeable
battery gives the plane tonnes of power for true 3D flight.


The Extra 330 comes with a 2.4G radio which means the range is longer and more stable plus you do not have to
worry about interference from other fliers. The plane is made from strong but lightweight foam that is more resistant
to crashes and gives easier stable flight even in windy conditions. The plane can take off from the ground or can be
hand launched.


Features
4 Channel 2.4G radio
Acrobatic 3D flying
Speed 400 Brushless Motor
4 Servos
Almost ready to fly. Minor assembly required.
Everything included apart from 8 x AA batteries for the transmitter
Great Aerobatic Capabilities
Powerful li-po battery with charger
Long 20 minutes flight time


Specifications
Wing Span: 37in/940mm
Length: 29.7in/755mm
Weight: 18oz/510g
Wing Area: 14.6dm²
Motor: Brushless (1050kv)
Servos: 4 x 9g High Speed
ESC: 25A Brushless
Battery: 11.1V 1250mAh Li-Polymer
Field charger with crocodile clips, suitable for car/leisure battery
Transmitter: 4CH 2.4Ghz
Receiver: 5CH Micro
Range: 1000m


Required To Use
8 x AA Batteries
£119.99




                                                                                                          Page 88/219
                                                                                                            08/2011




Focus EP 400 Aerobatics 3D 4CH RTF Plane
Model: DY8921


The new four channel, ready to fly Dynam Focus EP 400 is a beautifully designed single engined plane; factory
finished so that you can have it out of the box and flying in minutes. Virtually ready to go, all you need to fly it are
batteries and a few simple final assemply steps.


Perfect for all levels, this plane has the power and agility to perform incredible 3D aerobatic manoeuvres, thanks to
it's brushless motor and ESC. This power and its stability means it will work brilliantly in windy conditions too.
The Focus EP 400 not only looks good and realistic, but it is well made, strong and built for crash resistance, so
you can fly with confidence.


** This plane is available in either yellow, or blue. We are stocking the blue variant, though some of the pictures
here show the yellow model**


The Focus 400 is fitted with a brushless motor, which has several advantages over the brushed type. They are
more efficient and reliable, make less noise, haver a longer lifetime, and most importantly they deliver more power!
Added together this gives your aeroplane better capabilities for performing 3D aerial stunts.


Features
Construction: All foam
Wings: 1 pc wing with ailerons
Cowling: Plastic
Canopy: Clear plastic
Cockpit Features: Moulded foam
Landing Gear: Main and nose
Aileron Control: Single servo
Hardware: All necessary hardware included
Motor Mount: Plastic


Specifications
Overall Length: 774.7mm
Wing Span: 965mm
Wing Area: 17.3dm2
Fly Weight: 455g
Wing Loading: 17.3g/dm2
Drive System: Brushless Motor (1250kv)
Servo: 3X 9g High Speed Micro Servos
Speed Controller: 18A Brushless ESC
Battery: 11.1V 1250mAh Li-Polymer
Field charger with crocodile clips, suitable for car/leisure battery
Control: 4 CH Multi-functional FM Radio and 6 CH Micro Receiver
Range: 1000m


Required To Use
8 x AA Batteries




                                                                                                             Page 89/219
          08/2011




£119.99




          Page 90/219
                                                                                                                                    08/2011




RC Aeroplanes -/- Large Scale RC Planes




                    Cessna 182 Red RC plane PNP VERSION
                    Model: ST-T01A-PNP


                    The Cessna 182 Skylane is an American four-seat, single-engine, light airplane, built by Cessna of Wichita,
                    Kansas. It has the option of adding two child seats, installed in the baggage area. The Cessna 182 was introduced
                    in 1956 as a tricycle gear variant of the 180. In 1957, the 182A variant was introduced along with the name
                    Skylane.


                    Later models have added more powerful engines and bigger windows. Cessna cites the 1990s resumption in
                    producing general aviation aircraft such as this model due to change in U.S. liability laws. In 2005, Cessna began
                    offering the Garmin G1000 glass cockpit as an optional upgrade to the Skylane. Subsequently the glass cockpit
                    became standard equipment.


                    What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
                    Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
                    installed but is missing the receiver, transmitter, batteries and charger.


                    This is a large scale model and the attention to detail is amazing. All the decals are already in place and it really
                    does look the part. Striking colours, and its large size - it has a 1410mm wingspan, yes that's over 1.4 metres!
                    This massive scale make the Cessna 182 a stunning model aeroplane, that anyone would be proud to own, not
                    only that but much more stable than smaller models and easier to control, even in windy conditions.


                    You simply cannot get a better model Cessna of this scale and quality at this low price!


                    Included is an electronic speed controller, electric brushless motor and 4 electric servos all pre-installed. A 4ch
                    transmitter which is required to complete the model gives full 3D control of the aileron, elevator, rudder, and throttle.
                    The brushless motors gives enormous powerallowing full aerobatic characteristics and inside loops, outside loops,
                    axial rolls, inverted flight and spins are all possible.


                    The attention to detail from Starmax who are the leading rc jet manufacturers gives the plane a nice realistic
                    appearance. The plane can take off from the ground or can be hand launched. The Cessna is made from shock
                    resistant EPS foam with reinforced fuselage and strong wings. Should you need any spare parts though they are all
                    available from our site. This plane is a lot of fun and you will certainly enjoy flying this fantastic model.


                    Features
                    Pre-painted foam fuselage & wings
                    90% assembled
                    Some Pre-installed electrics
                    CAD engineering quality
                    Stunning paintwork




                                                                                                                                    Page 91/219
                                                                                                           08/2011




State of the art components
Can perform amazing aerobatics


Specifications
Length: 1030mm
Flight weight: 930g
Wingspan :1410mm
4pcs 9G servos
Wing load: 34g/dm2
Out-runner Brushless motor, KV900
30A ESC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£109.99




J3 Green Large Scale RC plane PNP Version
Model: ST-T02B-PNP


The Piper J-3 Cub is a small, simple, light aircraft that was built between 1937 and 1947 by Piper Aircraft. With
tandem (fore and aft) seating, it was intended for flight training but became one of the most popular and best-known
light aircraft of all time. The Cub's simplicity, affordability and popularity invokes comparisons to the Ford
Model T automobile.


It was used successfully in a number of military variants and this is the model we have here for you.


This is a large scale model and this beautifully finished aeroplane has a 1.4 metre wingspan, that's over four
and a half feet! This enormous size makes it very stable even in windy conditions, and makes it easier to control.
Not only that, but with a wingspan this big, it is one of the most impressive planes on the market at this amazing
price.


With a powerful brushless motor pre-installed, once you hook it up with the battery of your choice, this is going to
be one fast aeroplane!


It is almost completely built straight out of the box, only a few minutes of minor final assembly steps will be
required, plus the extra components which aren't included such as the receiver, transmitter, battery and
charger to get this classic aeroplane airbourne.


This model is well made, although lightweight, and it is built to be crash resistant, and to give a long life of fun
flying. The J3 is exceedingly stable, and will fly at low speeds, which makes it safe and fun, even for the beginner. It
is also possible to fly these planes at low altitude, great for when you're learning so those crashes aren't




                                                                                                             Page 92/219
                                                                                                            08/2011




too severe!


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


Like all our Starmax PNP models, the Piper J-3 is built to a very high standard and designed to reflect the looks of
the real model faithfully. It is equipped with a very powerful brushless motor, an ESC and most of the necessary
electronics installed. All you need to get this bird airborne is a transmitter, receiver, a Li-po battery and charger, all
of which are available as options above.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Can Take Off From Grass
Powerful Brushless Motor
Most electronics pre-installed
All linkages and control horns pre-installed
Realistic replica livery


Specifications
Wingspan: 1400mm
Wing Load: 56 g/dm²
Fly Weight: 1800g
4 pcs 9 g servos
Brushless motor 3648 out runner KV700
45A ESC 5A UBEC
Propeller: 12090


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£119.99




                                                                                                             Page 93/219
                                                                                                        08/2011




Large Scale HC Hobby B-25 Mitchell 5Ch Rc Aeroplane
Model: C-B25


The new B-25 Mitchell from HC Hobby is a fantastic large scale plane that has both the design and appearance of
the real bomber. With 2 powerful brushless motors, the B25 has plenty of power for short distance take-offs from
grass or tarmac and is capable of aerobatic action. The B-25 features HC Hobby patented sequenced servo
operated retractable landing gear and gear doors that add to the fantastic appearance. Check out the video below
to see them in action. This fantastic model is a pleasure to fly and its highly detailed appearance will wow the
crowds.


The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The kit itself is pre-assembled and
includes a whopping ten 9g servos to move all of the control surfaces, including flaps, twin rudder, retracts and
retract bay doors. Modular design means it is easy to replace damaged parts, such as main wing, tail wing, landing
gear, nose cone, propeller, etc in the rare event of your adventures taking a rough landing!


The B-25 Mitchell has a massive wingspan of 1355mm and is a whopping 1041mm long. The all up flying weight of
the model is 1750g once you've added a receiver and 3 cell 11.1v li-po battery. Two brushless 20A
ESC's are installed to power the twin brushless motors and drive the scale 3 bladed counter rotating props.
The B-25 can even be flown with only one engine. The model also has working navigational LEDS to complete the
scale appearance.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Working Retracts
Working Lights
Can Take Off From Grass
Twin Brushless Motors with counter-rotating props
Sequenced servo operated retractable landing gear and gear doors
All electronics pre-installed
All linkages and control horns pre-installed


Specifications
Wingspan: 1355mm
Length: 1041mm
Weight: 1750g
ESC: 2 x 20A
Motor: 2 x Brushless motor
Servo: 10 x 9g


Required To Use
5 Channel Transmitter and Receiver
11.1V 2200mAh Lipo battery and charger
£189.99




                                                                                                         Page 94/219
                                                                                                         08/2011




Large Scale HC Hobby Mosquito 5Ch Rc Aeroplane
Model: C-MOSQUITO


Following on from the amazing B-25 from HC Hobby comes their brand new plane, the Mosquito. A perfect replica
of the World War II British bomber, this remote control plane is a work of art. With 2 powerful brushless motors, the
Mosquito has plenty of power for short distance take-offs from grass or tarmac and is capable of aerobatic action.
The Mosquito remote control plane features sequenced servo operated retractable landing gear and gear doors
that add to the fantastic appearance. You will struggle to find a better looking plane than this on the market.


The Mosquito plane is constructed from a highly durable EPO-FLEXY foam. The kit itself is pre-assembled and
includes a whopping eight 9g servos to move all of the control surfaces, including flaps, twin rudder, retracts and
retract bay doors. Modular design means it is easy to replace damaged parts, such as main wing, tail wing, landing
gear, nose cone, propeller, etc in the rare event of your adventures taking a rough landing!


The Mosquito remote control plane has a massive wingspan of 1355mm and is a whopping 950mm long. The all
up flying weight of the model is 1700g once you've added a receiver (does not come with the model) and 3
cell 11.1v li-po battery (does not come with the model). Two brushless 20A ESC's are installed to power the
twin brushless motors and drive the scale 3 bladed counter rotating props. The Mosquito can even be flown with
only one engine.


Features
Massive Large Scale Plane
High Detailed Model Highly
Durable Tough EPO Construction
Working Retracts
Working Lights
Can Take Off From Grass
Twin Brushless Motors with counter-rotating props
Sequenced servo operated retractable landing gear and gear doors
All servos pre-installed
All linkages and control horns pre-installed


Specifications
Wingspan: 1355mm
Length: 950mm
Weight: 1700g
ESC: 2 x 30A
Motor: 2 x Brushless motor
Servo: 8 x 9g


Required To Use
5 Channel Transmitter and Receiver (does not come with the model)
11.1V 2200mAh Lipo battery and charger (does not come with the model)
£224.99




                                                                                                          Page 95/219
                                                                                                           08/2011




Large Scale MX2 Blue RC Plane PNP Version
Model: ST-T03B-PNP


The MX2 is a carbon fibre, two seat tandem sport aircraft produced by MX Aircraft of North Carolina. MX2s are
renowned for their reliability and performance. 1 step up is the MXS-R, the MX2's older brother, the MXS-R is
a single seat aerobatic aircraft, known for its great performance in the Red Bull Air Race.


The MX2 can pull a G-load of plus and minus 12 Gs, giving it tight turns and loops and a range of aerobatic
maneuvers. It has a top speed of 220 knots (410 km/h), a stall speed of 58 knots (107 km/h), and can roll at more
than 420 degrees per second. Its vertical penetration is up to 3,600 feet (1,100 m).


This is a striking blue version of the MX2, it has an amazing livery which will make it look awesome as you guide it
through the skies. It is in fact a replica of the planes used by the Gary Ward Airshows team. See picture above for
the real thing!


Starmax have pulled out all the stops with this one and it looks magnificent. With its sporting acrobatic pedigree
this is a radio controlled aeroplane that will give the experienced pilot hours of grin factor entertainment.


This is a large scale rc aeroplane offering both great looks and additional stability in the air, even when it is windy.


The MX2 is a large scale beast with a 1.4m wingspan - that's over 4 and a half feet wide. Yes, that big! You
won't be able to find a bigger, faster and more stunning MX2 anywhere at this price!


Propelled by a powerful brushless motor this plane will rocket and weave through the skies, rolling, looping,
twisting an turning as fast and as steeply as your skills and nerve will allow!


The MX2 is 95% built from the box, and most of the electronics are not only supplied but fitted too. All you need to
complete the model is a transmitter, receiver, Li-po battery and charger - all these are options on this page.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Can Take Off From Grass
Powerful Brushless Motor
Most electronics pre-installed
Amazing acrobatic ability
Realistic replica livery


Specifications
Wingspan: 1400mm
Length: 1240mm
Wing Load: 35 g/dm²
Fly Weight: 1900g
4 pcs 9g servos, 2 pcs 12g servos
Brushless motor 3648 out runner KV600




                                                                                                            Page 96/219
                                                                                                           08/2011




45A ESC 5A


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£129.99




Large Scale MX2 Green RC Plane PNP Version
Model: ST-T03A-PNP


The MX2 is a carbon fibre, two seat tandem sport aircraft produced by MX Aircraft of North Carolina. MX2s are
renowned for their reliability and performance. 1 step up is the MXS-R, the MX2's older brother, the MXS-R is
a single seat aerobatic aircraft, known for its great performance in the Red Bull Air Race.


The MX2 can pull a G-load of plus and minus 12 Gs, giving it tight turns and loops and a range of aerobatic
maneuvers. It has a top speed of 220 knots (410 km/h), a stall speed of 58 knots (107 km/h), and can roll at more
than 420 degrees per second. Its vertical penetration is up to 3,600 feet (1,100 m).


The MX2 Green we have here is a replica of one first used in the first air race season in 2006 in Abu Dhabi - see
picture above.


Starmax have pulled out all the stops with this one and it looks magnificent. With its sporting acrobatic pedigree
this is a radio controlled aeroplane that will give the experienced pilot hours of grin factor entertainment.


This is a large scale rc aeroplane offering both great looks and additional stability in the air, even when it is windy.


The MX2 is a large scale beast with a 1.4m wingspan - that's over 4 and a half feet wide. Yes, that big! You
won't be able to find a bigger, faster and more stunning MX2 anywhere at this price!


Propelled by a powerful brushless motor this plane will rocket and weave through the skies, rolling, looping,
twisting an turning as fast and as steeply as your skills and nerve will allow!


It's 95% built from the box, and most of the electronics are not only supplied but fitted too. All you need to
complete the model is a transmitter, receiver, Li-po battery and charger - all these are options on this page.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Can Take Off From Grass
Powerful Brushless Motor
Most electronics pre-installed




                                                                                                            Page 97/219
                                                                                                            08/2011




Amazing acrobatic ability
Realistic replica livery


Specifications
Wingspan: 1400mm
Length: 1240mm
Wing Load: 35 g/dm²
Fly Weight: 1900g
4 pcs 9g servos, 2 pcs 12g servos
Brushless motor 3648 out runner KV600
45A ESC 5A


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£129.99




P51 Mustang Large Scale RC Plane Red PNP Version
Model: ST-T04C-PNP


The P-51 Mustang was a single seater fighter plane, which was designed and built for World War II in just 117
days! The Royal Air Force used it as a fighter bomber, a reconnaissance plane, and as a bomber escort on raids
over Germany in 1944. It was powered by a supercharged Rolls Royce Merlin engine and was fitted with six .50
caliber (12.7 mm) M2 Browning machine guns.


Rearward visibility was a problem with WW2 fighter planes and this was solved by using a 'bubble' or
'teardrop' canopy. This new type of canopy was a development in the P-51D version, considered the
definitive Mustang, and is the model we have for you here.


Dago Red is a P-51 Mustang, restored as a competitive air racer by Frank Taylor in 1981. Dago Red holds several
world records, including the 15 km (517.323 mph) set in 1983. This model is an exact replica of this famous model.
Bright red and huge with its 1600mm wingspan - yes that's well over five feet, it is bound to be an eye-catcher
wherever you fly it.


It's massive scale not only looks amazing but adds to the stability of the aircraft which makes it easier to fly,
but also means you can take this one out even in windy conditions.


It is almost completely built straight out of the box, only a few minutes of minor final assembly steps will be
required, plus the extra components which aren't included such as the receiver, transmitter, battery and
charger to get this legend of the 20th century airbourne. This model is well made, although lightweight, and it is built
to be crash resistant, and to give a long life of fun flying. The P-51D is exceedingly stable, and will fly at low
speeds, which makes it safe and fun, even for the beginner. It is also possible to fly these planes at low altitude,




                                                                                                             Page 98/219
                                                                                                            08/2011




great for when you're learning so those crashes aren't too severe!


Like all our Starmax PNP models, the P51 Mustang is built to a very high standard and designed to reflect the
looks of the real model faithfully. This model even has retractable undercarriage, and flashing LED lights to add to
the realism. It is equipped with a very powerful brushless motor, an ESC and most of the necessary electronics
installed. All you need to get this bird airborne is a transmitter, receiver, a Li-po battery and charger, all of which are
available as options above.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Can Take Off From Grass
Powerful Brushless Motor
Most electronics pre-installed
All linkages and control horns pre-installed
Amazing acrobatic ability
Realistic replica livery
With flaps and retracts
LED navigation lights on main wing


Specifications
Prop:16*6 4 blades
Wingspan: 1600mm
Length: 1400mm
Flying weight: 2700g
Motor: 4558 out runner motor KV400
ESC: 70A
Servo: 4pcs*9G, 2pcs*17G
With flaps and retracts
Main wing with LED


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£189.99




P51 Mustang Large Scale RC Plane Silver PNP Version
Model: ST-T04B-PNP


The P-51 Mustang was a single seater fighter plane, which was designed and built for World War II in just 117
days! The Royal Air Force used it as a fighter bomber, a reconnaissance plane, and as a bomber escort on raids




                                                                                                             Page 99/219
                                                                                                            08/2011




over Germany in 1944. It was powered by a supercharged Rolls Royce Merlin engine and was fitted with six .50
caliber (12.7 mm) M2 Browning machine guns.


Rearward visibility was a problem with WW2 fighter planes and this was solved by using a 'bubble' or
'teardrop' canopy. This new type of canopy was a development in the P-51D version, considered the
definitive Mustang, and is the model we have for you here.


This model is a faithful and large scale replica of the full size P-51D Mustang (pictured above), the attention to
detail in the canopy and the WWII USAF decals is excellent and will not disappoint.


And when we say large scale we mean LARGE SCALE! This model plane has wingspan of 1600mm - giving all the
advantages that the massive size can offer, including brilliant graphics, CAD designed detail, and when flying -
additional stability making flying easier, even in windy conditions.


It is almost completely built straight out of the box, only a few minutes of minor final assembly steps will be
required, plus the extra components which aren't included such as the receiver, transmitter, battery and
charger to get this legend of the 20th century airbourne. This model is well made, although lightweight, and it is built
to be crash resistant, and to give a long life of fun flying. The P-51D is exceedingly stable, and will fly at low
speeds, which makes it safe and fun, even for the beginner. It is also possible to fly these planes at low altitude,
great for when you're learning so those crashes aren't too severe!


Like all our Starmax PNP models, the P51 Mustang is built to a very high standard and designed to reflect the
looks of the real model faithfully. This model even has retractable undercarriage, and flashing LED lights to add to
the realism. It is equipped with a very powerful brushless motor, an ESC and most of the necessary electronics
installed. All you need to get this bird airborne is a transmitter, receiver, a Li-po battery and charger, all of which are
available as options above.


Features
Massive Large Scale Plane
High Detailed Model
Highly Durable Tough EPO Construction
Can Take Off From Grass
Powerful Brushless Motor
Most electronics pre-installed
All linkages and control horns pre-installed
Amazing acrobatic ability
Realistic replica livery
With flaps and retracts
LED navigation lights on main wing


Specifications
Prop:16*6 4 blades
Wingspan: 1600mm
Length: 1400mm
Flying weight: 2700g
Motor: 4558 out runner motor KV400




                                                                                                            Page 100/219
                                             08/2011




ESC:70A
Servo:4pcs*9G,, 2pcs*17G
With flaps and retracts
Main wing with LED


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£189.99




                                             Page 101/219
                               08/2011




RC Aeroplanes -/- RC Gliders




                               Page 102/219
                                                                                                          08/2011




Sonic 185 Brushless 4CH 2.4G Brushless RC Glider
Model: DY8929


The Sonic 185 is an excellent choice of 'next' plane for pilots, who feel that they have mastererd the
rudiments of radio contolled flight, though suitable for beginners too. The Sonic has a 1.85 metre wingspan and a
powerful brushless motor with LiPo batteries. With this model you can turn off the motor, then soar down slopes
and climb with the thermals to enjoy the experience of truly silent flight.


Made from the same crash resistant foam material as other planes in the Dynam range, the Sonic is factory
finished, complete with a 4 channel receiver which allows full control of the rudder, elevator, ailerons and throttle.
For easier transportation, the Sonic has a split wing design and a carbon fibre wing joiner.


The Sonic 185 comes with a 2.4G radio which means the range is longer and more stable plus you do not have to
worry about interference from other fliers. The plane is made from strong but lightweight foam that is more resistant
to crashes and gives easier stable flight even in windy conditions.


Features
Sonic 185 4CH Remote Control Plane
Brushless 200W Motor
4-CH FM Transmitter Receiver
Motor, ESC, and 4 Servos pre-installed
Mains Power Supply for charger
Automatic Li-Po Balance Charger
High power Li-Po battery 7.4V–1800mAh


Specifications
Wing Span: 1850mm
Length: 1090mm
Weight RTF: 980g
Electric Motor: Brushless 200W
Battery: 7.4V 1800mAh 15C Li-Po
ESC: 35A
Radio: 4CH, 4 Servos (9g)


Required To Use
8 x AA Batteries
£149.99




                                                                                                          Page 103/219
                                                                                                                                  08/2011




RC Aeroplanes -/- RC Scale Planes




                    Cessna EP 400 4CH Brushless Electric RC Plane
                    Model: DY8924


                    Cessna is a brand of aeroplane manufacturer that almost everyone is familiar with, so when you fly one of our
                    Cessna 400s, you'll be cutting a recognisable shape in the sky! More people have learned to fly for real in one
                    of these than any other plane so it's the perfect place to start and develop your RC aeronautical skills.


                    Not only is this plane a great one to learn on, but the Cessna 400 is set up to perform 3D aerobatic manoeuvres
                    too. It is not only lightweight, but strong and more importantly in those first flights, it's crash resistant! All the
                    necessary electronics are pre-installed, so it's only a matter of minutes from opening the box, conducting the
                    final assembly steps and you'll have this 4 channel aircraft soaring through the skies.


                    The Cessna EP 400 is fitted with a brushless motor, which has several advantages over the brushed type. They
                    are more efficient and reliable, make less noise, haver a longer lifetime, and most importantly they deliver more
                    power! Added together this gives your aeroplane better capabilities for performing 3D aerial stunts.


                    Features
                    Moulded foam airframe parts
                    Extensive decal sheet
                    Pre-installed servos and pushrods
                    Pre-installed BP-12 brushless outrunner motor with 18 Amp brushless speed control
                    Spare Propeller
                    Molded plastic cowl
                    Landing Gear


                    Specifications
                    Length: 762mm
                    Wing Span: 960mm
                    Wing area: 15.3dm sq
                    Flying weight: 430g
                    Wing loading: 28.1g/sq dm
                    Motor: Brushless Motor(kv1750)
                    Battery: LiPo 11,1V-1250 mAh - 10C
                    Field charger with crocodile clips, suitable for car/leisure battery
                    ESC: 18A
                    Radio: Dynam Ne-Ko 4 channel, 35 mHz
                    Servo: 3 stk Dynam microservo, 8.4g
                    Receiver: micro receiver - 5 CH
                    Propeller: 2 stk Dynam 8x4,3




                                                                                                                                 Page 104/219
                   08/2011




Required To Use
8 x AA Batteries
£119.99




                   Page 105/219
                                                                                                              08/2011




Dynam DC-3 SkyBus 4 ch Brushless rc plane
Model: DY8931


This is a twin engined and realistic looking airliner, and is unique as the only purpose built passenger plane in our
range. It comes with 35MHz radio equipment and is powered by two brushless motors which make it extremely
powerful. It is also supplied with a high capacity Lipo battery which will give you the longest flight times possible.
This radio controlled model is a replica of the Douglas DC-3 - the aircraft whose range and speed revolutionised air
travel, the plane was first flown in 1935 and remarkably some are still in service today! The famous C-47 Dakota
military plane was also derived from this airliner, and enthuiasts like to paint this model in a livery faithful to its type,
so you can make it look like a Skybus with the included decals, or create your own unique model DC-3 or a C-47
Dakota!


Its looks make it stand out from the crowd, and its striking dimensions, with a wingspan of 57" certainly mean
this plane will be noticed. The Skybus is constructed from EPO foam, which does give it some durability and an
element of crash resistance, which can be handy on those first few flights.


This is an RTF or ready to fly kit which includes everything you need apart from the 8 AA batteries that you will
need for your transmitter. Approximately 30-45 minutes of basic assembly is all that should be required from
opening the box to getting the remote controlled aeroplane flying.


Features
Realistic look
Large and very striking model
Brushless powered for the best performance
35MHz radio equipment
Suitable for all levels of experience
4 channel control


Specifications
Wingspan:1470mm
Fuselage length:980mm
Wing Area:24.6dm2
Wing loading:48.8g/dm2
Flying weight:1200g
Servo:9g*4
Battery:11.1V 2200mAh 15C Li-Po
ESC:40A*2
Brushless Outrunner Motor:KV:1100


Required To Use
8 x AA batteries
£149.99




                                                                                                              Page 106/219
                                                                                                          08/2011




Jaguar 3CH Military J3 Piper Cub RC Plane
Model: G401-1


This Jaguar is a Piper Cub based military aeroplane, it is factory finished in its United States Air Force livery and
looks like an authentic World War II, Warbird.


This is a great beginners plane and comes nearly fully assembled in the box, all you have to do is snap on a few
final parts, and you're off! No tools are required.


Its two-stick three channel transmitter allows you to simply control up, down, left and right, so even a novice should
have it flying in minutes. This plane has been configured with brushed motor/35Hz combination making it an ideal,
low cost, entry level option for someone wanting to sample the world of radio controlled aeroplanes for the first
time.


Features
Flying time: approx. 15 mins
Flying height: approx. 300m
Range: 500m
Millitary USAF Livery
Can take off from the ground or hand


Specifications
Wing span: 955mm
Length: 730mm
Weight: 640g
Battery: 8.4v-650mAh NI-MH
Power: 380 brushed motor
4 channel TX
6 channel RX
2*9g servo,
1*25A brush ESC
Flying weight:450g


Required To Use
8 x AA Batteries
£69.99




                                                                                                         Page 107/219
                                                                                                           08/2011




Super Cub Piper PA-18 4CH Brushless RC Plane - 2.4GHz
Model: DY8927


The Piper PA-18 Super Cub is a two-seat, single-engine monoplane, introduced in 1949 by Piper Aircraft. Over
9,000 were built in nearly 40 years of production. The Super Cub was renowned for its ability to take off and land in
short distances, and due to this was made into float planes as well. The real thing would cruise at around 185 km/h,
115 mph, at altitudes up to 19,000 feet.


The new Dynam Super Cub PA-18 is ready to fly (RTF) with all electronics pre-installed. So you can have it out of
the box and up in the air, within a matter of minutes. This plane is suitable for all users, from the novice to the
expert, and will keep the most experienced of pilots entertained with its aerobatic skill. It’s light-weight,
strong, and crash resistant so that you can fly it with confidence no matter what your ability. This plane comes with
a powerful, brushless motor system which enables it to perform 3D aerobatic stunts, and to be flown easily, even in
windy conditions. You can even steer the rear wheel for greater control on the ground!


The Super Cub comes with a 2.4G radio which means the range is longer and more stable plus you do not have to
worry about interference from other fliers. The plane is made from strong but lightweight foam that is more resistant
to crashes and gives easier stable flight even in windy conditions. The plane can take off from the ground or can be
hand launched.


Features
Dynam Super Cub PA-18 4CH RC Remote Control Plane
Brushless Motor and ESC
4CH Transmitter/Receiver
110V-240V Power Adapter
Field charger with crocodile clips, suitable for car/leisure battery
11.1V 1250mAh Li-Po Rechargeable Battery
2 Propellers and Landing Gear
English User Manual


Specifications
Wing Span: 1070mm
Overall Length: 710mm
Fly Weight: 530g
Wing Area: 17.1dm²
Fuselage Length: 630mm
Drive System: Brushless Motor (1750kv)
Servo: 3 x 8.4g High Speed Micro Servos
Speed Controller: 18A Brushless ESC
Battery: 11.1V 1250mAh Li-Polymer
Control: 6 CH Transmitter and 6 CH Micro Receiver
Range: 1000m


Required To Use
8 x AA Batteries
£119.99




                                                                                                          Page 108/219
                                      08/2011




RC Aeroplanes -/- RC Trainer Planes




                                      Page 109/219
                                                                                                       08/2011




EZ Hawk Electric 3CH RTF Brushless Trainer Plane
Model: DY8925EZ


Dynam EZ Hawk with its brushless motor is the perfect trainer for beginners. Only a small amount of assembly is
required once the box is opened and you'll by flying this plane in minutes!


The EZ Hawk powered trainer is constructed from a durable EPO foam, so it can take the knocks and crashes as
you learn to use it to its full capability. The EZ Hawk is propelled by a powerful Dynam Speed 400 brushless motor
run off a Dynam Brushless Electronic Speed Control (ESC). This combination of power and control makes it an
excellent aerobatic craft. It also comes with a Li-Po battery and charger for longer flights.


The EZ Hawk is fitted with a brushless motor, which has several advantages over the brushed type. They are more
efficient and reliable, make less noise, haver a longer lifetime, and most importantly they deliver more power!
Added together this gives your aeroplane better capabilities for performing 3D aerial stunts.


Features
EZ Hawk plane inc. undercarriage and prop
Electronic Speed Controller
Dynam Speed 400 Brushless Motor
Tx and Rx crystals 35 Mhz
Battery: 11.1v 1250mah Li-Po battery


Specifications
Wing span :1370mm
Length : 870mm
Weight : 680g
Charger: 3 Cell Li-po balance charger
Transmitter: NE-KO4 FM 4 channel
Receiver: Dynam 35Mhz 5CH receiver
Servos: 9g micro servos (3pcs)


Required To Use
8 x AA Batteries
£114.99




                                                                                                       Page 110/219
                                                                                                       08/2011




Hawk Sky 4CH Brushless Sport Trainer Plane - 2.4GHz
Model: DY8925PRO


Dynam Hawksky with its brushless motor is the perfect trainer for beginners, who want a plane that they can learn
on, but is also capable of impressive stunts as their skills develop. Only a small amount of assembly is required
once the box is opened and you'll by flying this trainer in minutes!


The Hawksky plane is constructed from a durable EPO foam, so it can take the knocks and crashes as you learn
to use it to its full capability. The Hawk Sky is propelled by a powerful Dynam Speed 400 brushless motor run off a
Dynam Brushless Electronic Speed Control (ESC). This combination of power and control makes it an excellent
aerobatic craft. It also comes with an Li-po battery and charger for longer flights


The Hawksky comes with a 2.4G radio which means the range is longer and more stable plus you do not have to
worry about interference from other fliers. The plane is made from strong but lightweight foam that is more resistant
to crashes and gives easier stable flight even in windy conditions. The plane can take off from the ground or can be
hand launched.


Features
Hawk Sky plane inc undercarriage and propeller
Dynam 3 Cell standard Li-po charger
Brushless Electronic Speed Controller
Dynam Speed 400 Brushless Motor


Specifications
Wing span :1370mm
Length : 917mm
Fuselage length: 870mm
Weight : 600g
Wing area: 22.8dm2
Charger: 3 Cell Li-po charger
Transmitter: 4 Ch
Receiver: 5CH receiver
Servos: 8.4g micro servos (4pcs)
ESC: Brushless Electronic Speed Controller


Required To Use
8 x AA Batteries
£124.99




                                                                                                       Page 111/219
                                                                                                          08/2011




Snow Bird 3CH Electric Brushed RC Planes
Model: DY8928


This is the latest Snow Bird plane from Dynam, a 3 channel model. Everything apart from the batteries is included
in the box and you can have the craft in the air within minutes of opening it, without need for tools or glue!


This plane is suitable for all, from novice pilots to those with much more experience. To cope with the rigours of
being used to learn on it has a tough plastic and foam construction and even comes with two sets of wings, a thick
one for beginners, and a thinner one for experienced pilots. The wings are reinforced with a carbon rod, for
additional robustness.


Free FMS flight simulator freeware is supplied together with a USB interface cable to connect your transmitter
directly to your computer. The transmitter supplied is a 4 channel stick operated device not the more simplified
training transmitter illustrated on the box.


Features
Aeroplane (90% assembled)
2 Main Wing Sets
3 Channel FM Radio Transmitter
Wall Battery Charger
High Quality Rechargeable 7.2V 650mAh Ni-MH Battery
USB Simulation Cable
English Manual


Specifications
Wingspan: 880mm
Overall Length: 740mm
Wing Area: 11.3dm2
Wing Loading: 31.9g/dm2
Flying Weight: 360g
Motor: Brushed
Servo: 2X 7g servos
Battery: 7.2V 650mAh Ni-MH
Control: 4CH FM Radio Transmitter and 3CH Receiver
Range: 2000 feet


Required To Use
8 x AA Batteries
£59.99




                                                                                                         Page 112/219
                                                                                                                                    08/2011




RC Aeroplanes -/- RC Warbirds




                    Focke-Wulf FW-190 4CH Fighter Scale Plane
                    Model: G604


                    The Focke-Wulf Fw 190 Würger was a German single-seat, single-radial engine fighter aircraft designed by
                    Kurt Tank in the late 1930s. It was used by the Luftwaffe during the Second World War, and is up there with the
                    Spitfire and the P-51D Mustang as one of the best fighter planes of the period. The Fw 190 had a top speed of over
                    400 mph and could undertake sorties of around 500 miles. To take down its target the Focke was equipped with
                    two 13 mm MG 131 machine guns with 475 rpg (rounds per gun), and four 20 mm MG 151/20 E cannons with 250
                    rpg in the wing root and 140 rpg outboard.


                    Once you've opened the box, this replica Fw 190 will be ready for take-off in only a few minutes, radio
                    equipment and everything you need to fly (apart from 8 AA batteries for the transmitter) is included in the package.


                    This model is lightweight, extremely tough, and the fuselage has been finished, carefully emulating the details of
                    the original aeroplane. This plane features excellent stability and awesome aerobatic capabilities. An experienced
                    pilot will have it performing inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns,
                    hammerheads, and even spins!


                    This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
                    included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
                    These steps should take around 30 minutes to complete.


                    Features
                    4 CH Full RC - Aileron, Elevator, Rudder, Throttle
                    Full aerobatic characteristics
                    Powerful brush motor
                    Excellent stability
                    Ready to Fly in Just Minutes!
                    Super tough
                    lightweight
                    Shock Resistant Fuselage
                    Strong Wings
                    Pre-installed Electronics
                    Suitable for beginners and experts
                    Only required 8 AA batteries for the transmitter to start flying


                    Specifications
                    Wing span: 1010mm
                    Length: 890mm
                    Flying Weight: 410g




                                                                                                                                   Page 113/219
                                                                                                            08/2011




Power: 370 carbon brush motor
Speed Controller: 25A speed controller
Servo: 3x10g
Battery: 8.4 V 600mah Ni-MH
Control: 4Ch 35Mhz Multifunctional Radio Tx/Rx Range: 800 feet


Required To Use
8 x AA Batteries
£69.99




Messerschmitt ME-109 4CH Brushless RC Plane 2.4Ghz
Model: G602


This radio controlled RTF 4 CH 2.4Ghz GuanLi Messerschmitt ME-109 electric brushless WWII 3D plane has a
tough, but lightweight airframe and the outer shell is superbly finished, carefully emulating the details of the real
thing. This fighter model is incredibly stable and will fly at low speed and low altitude making it simple, safe and fun,
even for the beginner.


The Messerschmit's design makes it a brilliant 3D aerobatic performer for the experienced pilot: inside loops,
outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all possible. It can roll
quickly and is super stable even when flying upside down. The wing and body are specially designed to allow high
G manoeuvres, however the wing loading is still very low.


The Me-109 has been upgraded with a powerful brushless motor and a 2.4Ghz radio transmitter making it a
perfect choice for the enthuiast. We have also upgraded the charger from a standard one to a balanced charger
included in the price. This makes charging safer and better for the battery.


As you can see from the pictures this plane has been meticulously created, faithfully reproducing the famous
warbird in a manner that does its aeronautical reputation justice. The model can be used within minutes of opening
the box as it's 90% assembled for you at the factory. The Me-109 was the best known and most produced
German fighter of World War II. It was the backbone of the German fighter command and ruled the skies over
Europe from 1939 to 1941 as Hitler spread his empire over the continent. The Me-109s earned the respect of
Germany's enemies in every theater of conflict and were greatly feared by Allied bomber crews during the
later half of the war.


This ME-109 has been a favorite of R/C modelers for years and is now available as an easy-going ready-to-fly
replica that is small enough and quiet enough for flying sorties at your local park or sport field! This plane is
described as RTF or ready to fly. This means that everything except batteries for the transmitter is included in the
box and that only a few minor stages of assembly remain such as attaching the wings and tailplane. These steps
should take around 30 minutes to complete.


Features




                                                                                                            Page 114/219
                                                                                                            08/2011




Powerful brushless motor and Li-Po battery
4 CH Full RC - Aileron, Elevator, Rudder, Throttle
2.4Ghz Radio Equipment
Rudder helps steer plane on ground
Full aerobatic characteristics
Excellent stability
Ready to Fly in Just Minutes!
Super tough
Lightweight
Shock Resistant Fuselage
Strong Wings
Pre-installed Electronics
Suitable for beginners and experts
Only required 8 AA batteries for the transmitter to start flying


Specifications
Wing span: 900mm
Length: 780mm
Flying weight: 405g
Drive: 2410 Brushless Motor 1200KV
Speed Controller:20A Brushless ESC
Servo: 3x10g
Battery: 11.1V 1000mah 15C LiPo Battery
Control: 4 CH 2.4Ghz Radio Tx & Rx
Range: 1000 feet


Required To Use
8 x AA Battreries
£99.99




P51D WWII Mustang Brushless 4CH RC Plane 2.4G
Model: G501-2


The P51D is a four channel full function radio controlled plane. It has full aerobatic abilities with inside loops,
outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins all possible. The rudder
helps steer the plane on ground meaning take offs from the ground are possible. The super tough plane comes with
all electronics included and is ready to fly in just minutes.


This model is a perfect replica of the famous WWII warbird and great attention has been given to the details. The
huge strong wings and shock resistant reinforced fuselage make it reliable and crash resistant as well as improving
flight performance. **Some of the pictures show a green version of the plane, the one which we ship is finished in
black. **




                                                                                                           Page 115/219
                                                                                                        08/2011




This is the upgraded version of the P-51D Mustang that has been upgraded with a powerful brushless motor and
li-polymer battery giving more power and speed. The radio equipment has also been upgraded to 2.4Ghz which is
more reliable and increases the range. The standard charger has been replaced with a UK balanced charger
included in the price. This makes charging safer and better for the battery.


This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
These steps should take around 30 minutes to complete. The model is suitable for both beginners and experienced
pilots.


Features
4 CH Full RC - Aileron, Elevator, Rudder, Throttle
2.4Ghz radio equipment
Full aerobatic characteristics
Powerful brushless motor and Li-Polymer battery
Excellent stability
Ready to Fly in Just Minutes!
Super tough
Lightweight
Shock Resistant Fuselage
Strong Wings
Pre-installed Electronics
Suitable for beginners and experts
Only required 8 AA batteries for the transmitter to start flying


Specifications
Wing span: 870mm
Length: 730mm
Flying weight: 405g
Battery: Li-Po 11.1V-1000mAh
Power: C2410 brushless motor
Control: 4CH 2.4G RC system 3 servos 25A brushless
ESC Range: 1000 feet


Required To Use
8 x AA Batteries
£99.99




                                                                                                        Page 116/219
                                                                                                              08/2011




Tiger Moth 4CH Brushless RC Biplane - 2.4GHz
Model: G408


The de Havilland DH 82 Tiger Moth is a 1930s biplane designed by Geoffrey de Havilland and was operated by the
Royal Air Force and others as a primary trainer. Over 4000 Tiger Moths were made for the RAF during World War
II, and the plane remained in service until 1952. Tiger Moths are still used recreationally today.


This replica of the classic aircraft is virtually ready to fly straight out of the box, only about 30 minutes of tinkering
will be required to get this compact, and quiet aeroplane in the air.


This model has a tough, but lightweight airframe, and the outer shell has been finished, emulating the details of the
real thing. The Tiger Moth is incredibly stable and will fly at remarkably low speeds, and at low altitude making it
simple, safe and fun, even for the beginner. The Tiger Moth's design also makes it an excellent 3D aerobatic
performer for the experienced pilot: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns,
hammerheads, and spins are possible; it can roll very quickly and is super stable even when flying upside down.


This model has been specified with a powerful brushless motor, li-po battery and a 2.4Ghz radio transmitter,
making it a perfect choice for the enthusiast. We have also upgraded the charger from a standard one, to a
balanced charger included in the price. This makes charging safer and better for the battery.


This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
These steps should take around 30 minutes to complete.


Features
4 Ch Full RC - Aileron, Elevator, Rudder, Throttle
2.4Ghz Radio Equipment
Powerful brushless motor setup
High capacity Li-Polymer battery
Full aerobatic characteristics
Excellent stability
Ready to Fly in Minutes!
Super tough
lightweight
Shock Resistant Fuselage
Strong Wings
Pre-installed Electronics
Suitable for beginners and experts


Specifications
Wing span: 800mm
Length: 670mm
Flying weight: 400g
Battery: Li-Po 11.1V-1000mAh
Power: C2410 brushless motor
Control: 2.4Ghz 4CH RC system




                                                                                                             Page 117/219
                    08/2011




4 servos
25A brushless ESC
Range: 1000 feet


Required To Use
8 x AA Batteries
£99.99




                    Page 118/219
                                                                                                                               08/2011




RC Aeroplanes -/- Twin Motor RC Planes




                    A-10 Thunderbolt II RTF 4CH RC Brushless Scale Model Jet 2.4G
                    Model: G603


                    The A-10 Thunderbolt II (also known as the Warthog) comes with all electronics and radio gear included and is the
                    upgraded version featuring twin brushless motors and 2.4Ghz radio equipment. You will not find a 2.4G twin
                    brushless jet that is better priced than this. The A-10 has superb manoeuverability even at low speeds and altitude,
                    this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs
                    and landings, allowing it top operate from the smallest and most basic airfields.


                    This model replica of the A-10 Thunderbolt II requires only minor assembly such as attaching the wings etc so you
                    can get it in the air within minutes of opening the box. Once assembled this plane looks amazing and quite
                    imposing with a wingspan of nearly three feet!


                    When it is airbourne it has full four channel radio control, allowing adjustment of the aileron, elevator, throttle, and
                    when the plane is on the ground, it is complete with front wheel steering.


                    Powered by twin 2410 brushless motors(1200KV) this plane is capable of high speed, 3D aerobatic stunts and also
                    is able to fly in windy conditions. The A-10 is a confident acrobat and capable of a full range of impressive tricks
                    and maneuvers in experienced hands. It can perform: inside loops, outside loops, axial rolls, inverted flight, knife
                    edge, stall turns, hammerheads, and spins. Despite its aerobatic pedigree, the same design that gives it the ability
                    to carryout breathtaking 3D moves, means it is a stable plane and so also suitable for the beginner and mid-level
                    pilot too.


                    The Thunderbolt has been fitted with twin powerful brushless motors, and a 2.4Ghz radio transmitter for more
                    stable control and a longer range. The brushless motors are powered by a 11.1V Li-polymer battery instead of the
                    standard Ni-Mh. It is the perfect choice for the enthuiast. We have also upgraded the charger from a standard one,
                    to a balanced charger included in the price. This makes charging safer and better for the battery.


                    This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
                    included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
                    These steps should take around 30 minutes to complete.


                    Features
                    4 CH Full RC - Aileron, Elevator, Wheel, Throttle
                    Upgraded 2.4Ghz Radio Equipment
                    Twin Brushless Motors
                    Full aerobatic characteristics
                    Powerful brushless motors
                    Excellent stability
                    Ready to Fly in Just Minutes!




                                                                                                                               Page 119/219
                                                                                                           08/2011




Super tough & Lightweight
Shock Resistant Fuselage
Pre-installed Electronics
Suitable for beginners and experts
Only required 8 AA batteries for the transmitter to start flying
10-15 minutes flight time


Specifications
Wing span: 872mm
Length: 968mm
Flying Weight: 450g
Drive: Twin brushless motors 1200KV
Speed Controller: 25A brushless ESC
Servo: 3x10g
Battery: 11.1V 15C 1500MAH Li-Po
Charger: Li-Po balance charger
Control: 4 CH 2.4GHz Radio Tx and Rx


Required To Use
8 x AA Batteries
£119.99




Catalina 4CH Brushless Twin Power RC Sea Plane 2.4GHz
Model: G607


The Catalina was an American flying boat of the 1930s and 1940s, produced by Consolidated Aircraft. It was such
a versatile aeroplane that it performed numerous functions during WWII, and was used by the Air Forces, Armies
and Navies of many countries.


Catalinas were used in anti-submarine warfare, patrol bombing, convoy escorts, search and rescue missions and
cargo transport. It was the most successful aircraft of its kind and produced in greater numbers than any other
flying boat. Some remained in military service until the 1980s and even today the Catalina continues to be used as
an airtanker in some parts of the world.


The Catalina has full four channel radio control allowing adjustment of the aileron, elevator, rudder, and throttle; it
can even be steered when floating on the water. Yes, water! This model sea plane has been designed so that it can
actually take off and land on water, the twin brushless motors it is powered with can send it soaring effortlessly from
your local lake or pond, into the sky. With its wingspan of just over four and a half feet it really does look
spectacular, see the video below! The design of this aeroplane does not make it as agile as some other models, but
it can pull a loop from a shallow dive and looks fantastic doing a low flypast either over land or water. In any case
the power of the twin brushless motors enables it to be flown in many conditions, even when it is windy. The
Catalina has been specified with a powerful brushless motor, and a 2.4Ghz radio transmitter, making it a perfect




                                                                                                           Page 120/219
                                                                                                          08/2011




choice for the enthuiast. We have also upgraded the charger from a standard one, to a balanced charger included
in the price. This makes charging safer and better for the battery


The Catalina is nearly ready to fly straight from the box, all the necessary glue and tools are included in the in the
carton and you will have it flying in no more than a few minutes. All you'll need are 8 AA batteries for the
transmitter. This plane is described as RTF or ready to fly, this means that everything except batteries for the
transmitter is included in the box and that only a few minor stages of assembly remain, such as attaching the wings
and tailplane. These steps should take around 30 minutes to complete.


Features
4 CH Full RC - Aileron, Elevator, Rudder, Throttle
Rudder can steer on ground and water
Powerful brushless motor
Excellent stability
Ready to Fly in Just Minutes!
Super tough
Lightweight
Shock Resistant Fuselage
Strong Wings
Pre-installed Electronics
Suitable for beginners and experts
Only required 8 AA batteries for the transmitter to start flying


Specifications
Wing span: 1380mm
Length: 880mm
Flying Weight: 780g
Battery: Li-po 11.1V-1500mAh
Power: twin C2410 brushless motors
Control : 4CH RC 2.4G system, 4 servos
2 x 25A brushless ESC
Range: 1000 feet


Required To Use
8 x AA Batteries
£129.99




                                                                                                         Page 121/219
                                                                                                              08/2011




Dynam DC-3 SkyBus 4 ch Brushless rc plane
Model: DY8931


This is a twin engined and realistic looking airliner, and is unique as the only purpose built passenger plane in our
range. It comes with 35MHz radio equipment and is powered by two brushless motors which make it extremely
powerful. It is also supplied with a high capacity Lipo battery which will give you the longest flight times possible.
This radio controlled model is a replica of the Douglas DC-3 - the aircraft whose range and speed revolutionised air
travel, the plane was first flown in 1935 and remarkably some are still in service today! The famous C-47 Dakota
military plane was also derived from this airliner, and enthuiasts like to paint this model in a livery faithful to its type,
so you can make it look like a Skybus with the included decals, or create your own unique model DC-3 or a C-47
Dakota!


Its looks make it stand out from the crowd, and its striking dimensions, with a wingspan of 57" certainly mean
this plane will be noticed. The Skybus is constructed from EPO foam, which does give it some durability and an
element of crash resistance, which can be handy on those first few flights.


This is an RTF or ready to fly kit which includes everything you need apart from the 8 AA batteries that you will
need for your transmitter. Approximately 30-45 minutes of basic assembly is all that should be required from
opening the box to getting the remote controlled aeroplane flying.


Features
Realistic look
Large and very striking model
Brushless powered for the best performance
35MHz radio equipment
Suitable for all levels of experience
4 channel control


Specifications
Wingspan:1470mm
Fuselage length:980mm
Wing Area:24.6dm2
Wing loading:48.8g/dm2
Flying weight:1200g
Servo:9g*4
Battery:11.1V 2200mAh 15C Li-Po
ESC:40A*2
Brushless Outrunner Motor:KV:1100


Required To Use
8 x AA batteries
£149.99




                                                                                                              Page 122/219
                                                                                                         08/2011




Messerschmitt T-109 4CH Brushed Rc Plane
Model: G606


The 4Ch Guan Li Messerschmitt T-109 Fighter Plane is lightweight and extremely tough plane featuring a
reinforced fuselage and wings so it's as crash resistant as possible. The fuselage has been factory finished
and the details of the real plane have been carefully reproduced.. This plane features excellent stability and
amazing aerobatic capabilities. Once you've become experienced you will have it performing inside loops,
outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and even spins!


Like many of our planes this Messerschmitt T-109 Fighter Plane is virtually ready to fly straight from the box, all
you'll need is 8 AA batteries to power the transmitter. The big feature of the plane is the twin motor setup and
unique design that looks fantastic when flying.


This plane is described as RTF or ready to fly, this means that everything except batteries for the transmitter is
included in the box and that only a few minor stages of assembly remain, such as attaching the wings and tailplane.
These steps should take around 30 minutes to complete.


Features
4 CH Full RC - Aileron, Elevator, Rudder, Throttle
Full aerobatic characteristics
Powerful brushed motor
Excellent stability
Ready to Fly in Just Minutes!
Super tough
lightweight
Shock Resistant Fuselage
Strong Wings
Pre-installed Electronics
Suitable for beginners and experts
Only required 8 AA batteries for the transmitter to start flying


Specifications
Wing span: 1200mm
Length: 780mm
Flying Weight: 410g
Power: Twin 370 carbon brush motor
Gearbox: 1:5.33 gear w 1080 propeller
Speed Controller: 40A ESC
Servo: 3x10g
Battery: 9.6V 650mAh Ni-MH
Radio Gear: 4CH 35Mhz Radio Tx/Rx Range: 800 feet


Required To Use
8 x AA Batteries
£79.99




                                                                                                         Page 123/219
                                                                                                                           08/2011




RC Boats -/- 1:14 RC Boats




                    1:14 Scale Spurt Radio Controlled Speed Boat 40" Long
                    Model: MRS-757T6027


                    This 40 inch long radio controlled boat is powered by a 540 type racing motor with a built in water cooling system,
                    which allows for a tremendous amount of torque and thrust to be delivered over extended periods.


                    The remote control boat sports a high gloss exterior paint job on a polycarbonate plastic hull, which not only makes
                    the boat look great, but it gives a certain level of durability too.


                    With the sporty design, the Spurt rc boats can reach a speeds up to 20mph (depending on water condition). This
                    remote control boat comes with everything you need to start playing right out-of-the-box (you'll have to charge
                    the battery pack for about 4 hours though... standard RC model procedure)


                    Package Includes:
                    Remote Control Boat (100% assembled)
                    Radio Controller with antenna
                    Wall Battery Charger 7.2v
                    Ni-CD 1800 mAh Ni-CD Rechargeable battery
                    Extra Propeller
                    Boat Display Stand
                    English Manual


                    Features
                    Full Function Radio Control (Forward , Left and Right turn, Stop)
                    Water cooling system for motor
                    High speed servo for the rudder control giving great manoeuvrings capabilities!
                    Professional large torsion propeller
                    Powerful high speed 540 motor, capable of pushing this remote control boat to 20 mph
                    Equipped with a waterproof hatch to the radio compartment to keep radio equipment safe and dry
                    Wheel-type controller allows for easy and responsive control
                    Professional Hi-Capacity rechargeable battery and quick battery charger
                    100% metal mechanism which is durable
                    Outdoor operating range up to 100m away
                    Upto 20 minutes playing time for each charge
                    Complete Kit, Ready to Run (Everything is included and 100% assembled - only required 8 AA batteries for the
                    transmitter to start racing)


                    Specifications
                    Length: 1010mm (39.7 inch)
                    Width: 280mm (11 inch)




                                                                                                                          Page 124/219
                         08/2011




Height: 229mm (9 inch)


Required To Use
8 AA batteries
£59.99




                         Page 125/219
                                                                                                                             08/2011




RC Boats -/- 1:16 RC Boats




                    1:16 Scale Dolphin Radio Controlled Boats with Water Cooled Moto
                    Model: MRS-6031


                    This is the new 32 Inch long Dolphin RTR Electric RC Racing Speed Boat. This superb looking boat is driven by a
                    powerful 540 type racing motor, which for its size produces an incredible amount of power. It comes with
                    professionally designed large torsion propeller which provide an immense amount of thrust. Its hard plastic body
                    design gives this RC boat extreme durability.


                    With the superb sporty design, this vessel is easy to control while gliding effortlessly on the water. The high
                    capacity battery gives you more running time - upto 25 minutes per charge, depending on conditions and it also
                    comes with a quick charger so that time out of the water is at a minimum.


                    Its size and power mean that it is suitable for use on rivers, lakes, and ponds.


                    Complete Kit, Ready to Run Includes:
                    Boat (100% assembled)
                    Radio Controller with antenna
                    Wall Battery Charger
                    7.2v NiCD 1800 mAh NiCD Rechargeable battery
                    Spare Propeller
                    Boat Display Stand
                    English Manual


                    Features
                    Full Function Radio Controlled (Forward , Left and Right turn, Stop)
                    Special speed controller for boats delivers a reliable, smooth, non-stepped driving force
                    Water cooling system for motor
                    High speed servo for rudder control for great maneuvering capabilities!
                    Large torsion propeller
                    Powerful high speed 540 motor, capable of pushing this boat up to 15-20mph
                    Equipped with a waterproof hatch to the radio compartment to keep radio equipment safe and dry
                    Wheel-type controller allows for easy and responsive
                    Professional Hi-Capacity rechargeable battery and quick battery charger
                    100% metal mechanism for durability
                    Outdoor operating range up to 100 metres away
                    Upto 25 minutes playing time for each charge


                    Specifications
                    Length: 810mm (32 inch)
                    Width: 270mm (10.6 inch)




                                                                                                                             Page 126/219
                                               08/2011




Height: 191mm (7.5 inch)
Wall Battery Charger
7.2v NiCD 1800 mAh NiCD Rechargeable battery
Spare Propeller


Required To Use
8AA batteries for the transmitter
£59.99




                                               Page 127/219
                                                                                                         08/2011




Arrow Wind 1:16 Electric Remote Control Boat RTR
Model: MRS-4017


The brand new Arrow Wind rc boats is fast and furious fun. With a SC 390 type racing motor and a large torsion
propeller you can reach speeds of 25+ MPH, and really put this craft through the motions.


Features authentic and stylish detailing, this remote control boat is perfect for pools, ponds, rivers, and lakes. Take
this fully functional reproduction model of an offshore rc boats out to the water and watch it fly! The propellers can
be controlled from the boats dual joystick transmitter to provide top speeds with forward, left, and right turning
functions. It comes with a 9.6v 700 mAh Ni-Cd rechargeable battery and charger.


A red or white colour version remote control boat will be shipped depending on stock availability.


Features
Catamaran Hull Design for Easy Control
3-Function Remote Control
Fully Assembled and Ready-To-Run
SC 390 Type Racing Motor
Professional Large Torsion Propeller
Spare Propellers, Spring Washer, & Thread Nut


Specifications
Speed: 15 - 25+ MPH
Frequencies: 27 or 40MHz
SC 390 Type Racing Motor
Range: approx. 100m
Length: 550mm.
Width: 345mm.
Height: 125mm.


Required To Use
8 AA batteries for transmitter
£34.99




Hi-speed Radio Controlled Hydro Rc Boats 1:16 Electric
Model: MRS-6026


This high speed hydro boat is powered by a 540 high speed racing motor. It is styled like the offshore race boats
and is highly manouvreable at speed as it skims across the water. It features a large torsion propeller which gives
the maximum possible speed from the 540 motor. The speed controller has been developed to give a smooth
increase in power as you increase the throttle, this gives a better acceleration through the water.


With this model radio controlled boats the racing motor is water cooled and coupled with the 7.2V racing battery




                                                                                                         Page 128/219
                                                                                                       08/2011




pack makes it very quick.


The boat can be used for up to 35 minutes per charge.


This model radio controlled boats come with everything you need (except batteries for the transmitter) and is ready
to go straight out of the box, in either white or yellow scheme depending on stock.


The package includes:
Boat (100% assembled)
Radio Controller with antenna
Battery Charger
7.2v Rechargeable battery
Spare Propeller
Boat Display Stand
English Manual


Features
Full Function Radio Controlled model (Forward, Left and Right turn, Stop).
Special speed controller for boats delivers a reliable, smooth, non-stepped driving force Water cooling for motor
High speed servo for rudder control for great maneuvering capabilities.
R/C Racing Boat model with professional torsion larger propeller.
Powerful high speed water-cooled 540 motor.
Equipped with a waterproof hatch to the radio compartment to keep radio equipment safe and dry.
Wheel-type controller allows for easy and sure control.
Vector-push design.
Hi-Capacity rechargeable battery.
Quick battery charger.
100% metal activating mechanism which is durable.
Outdoor operating range up to 100m away.
Approx 35 minutes playing time for each charge.
Complete Kit, Ready to Run model.


Specifications
Length: 700mm
Width: 360mm
Height: 185mm
Operating range: 100m
18mph top speed
540 Electric motor
Boat speed controller


Required To Use
8AA batteries for the transmitter
£59.99




                                                                                                      Page 129/219
                                                                                                        08/2011




Super Cyclone Electric RC Boat 1:16 scale RTR
Model: MRS-6037


The brand new ready to run 1/16th scale electric Super Cyclone RC speed boat brings speed and excitement on
the water as it twists and turns. The fully loaded electric Cyclone radio controlled boats are constructed from an
ABS plastic hull, and is finished to be one of the most detailed and realistic rc boats on the market. The high
performance 380 motor will blast the Cyclone out of the water at 15+ mph and all is controlled by a micro servo with
9.6v battery and charger.


This speed boat will delight anyone who likes radio controlled boats. It comes with a pistol grip transmitter and can
power through water on ponds, lakes, and rivers.


Features
Full Function Radio Controlled (Forward, Left and Right turn, Stop)
Professional torsion propeller
The boat is powered by a 380 type racing motor
High speed micro servo for rudder control for great maneuvering capabilities!
Glossy exterior paint
Professionally designed and manufactured propeller which provides huge thrust
Damage resistant propeller
Easy to control
Professional Hi-Capacity rechargeable battery and quickly battery charger
Durable mechanics
Outdoor operating range up to 100m
Approx speed 15+mph
Approx 20 minutes running time for each charge
Complete Kit, Ready to Run (Everything is included and 100% assembled -- only required 8 AA batteries for the
transmitter to start racing)


Specifications
Length : 620mm
Width : 155mm
Height:190mm
Boat (100% assembled)
Radio Controller with antenna
Wall Battery Charger
9.6V 700mAH Ni-CD Rechargeable Boat Battery
Boat Display Stand
English Manual


Required To Use
8 AA batteries for transmitter
£39.99




                                                                                                        Page 130/219
                                                                                                                            08/2011




RC Boats -/- 1:30 RC Boats




                    Flip and Dive Radio Controlled RC Boat 1:30
                    Model: MRS-4019


                    This an amazing little 1:30 scale boat that can perform some neat tricks as it skims across the water. With a flick of
                    a switch, you can make it dive under the surface then leap out of the water again. This model is easy to use and as
                    much fun as you can have on water.


                    Suitable for use on the pond, rivers, swimming pools, lakes and even the sea on a calm day, this boat is
                    guaranteed to provide hours of fun for the whole family.


                    Colour supplied will be either red or yellow depending on stock availability.


                    Features
                    Simple controls
                    Stunt ability - can dive and jump in and out of the water


                    Specifications
                    Length: 430mm
                    Width: 245mm
                    Height: 140mm
                    Motor: 390 Type
                    Battery: 1*9.6V(Ni-cd) Battery pack
                    Controller:1*9V(006P)Battery
                    Speed: 4.5m/s
                    Distance: Over 80m
                    Function: Forward, Stop, Turn left, Turn Right, Flip & Dive


                    Required To Use
                    9V battery for controller
                    £34.99




                                                                                                                            Page 131/219
                                                                                                                              08/2011




RC Boats -/- Hovercraft




                     Mini Remote Control Hovercraft
                     Model: MRCH-9106


                     This mini remote controlled hovercraft is designed for fun in the back garden, on snow the local pond and even the
                     bath! It charges quickly to give 10 minutes of play, so there's no long gaps between runs.


                     This little craft is suitable for anyone from 8 years up and makes a brilliant present for anyone into remote control
                     toys, and has a range of about 10m from the remote.


                     Despite its small size it operates in the same fasion as the real thing, with a powerful ruddered fan providing the
                     thrust.


                     Features
                     Ruddered fan to provide thrust
                     Black rubber skirt like real hovercraft
                     Suitable for the bath, pond, and back garden
                     Works on both land and water


                     Specifications
                     Product battery: 3.7V lipo battery
                     Remote Control Battery: 4 * 1.5V AA (not included)
                     Charging time :20-30 minutes
                     Play Time: 10 minutes
                     Remote control distance: 10 meters


                     Required To Use
                     4AA batteries for the remote control unit
                     £24.99




                                                                                                                              Page 132/219
                                                                                                         08/2011




Radio Controlled RC Hovercraft - Electric
Model: MRCH-6649


The ultimate land and water vehicle is here! Yes now you can move effortlessly from one to the other with this
amazing electric powered hovercraft.


Carefully designed for realism, the detail on this hovercraft is excellent. It has a powerful rear mounted fan with
rudders and a black rubber skirt as seen on the famous cross-channel hovercraft.


It comes in a range of striking colour schemes and will bring a smile to anybody's face, as you take it off land
and drive it into water for the first time!


Features
Able to run on land and water
Electric powered
Realistic design, and striking livery
Everything you need is included
Ready to run straight out of the box!


Specifications
product size: 28x21x12cm
gift boxed
Equipped with 6V 800MAH NICD battery
9.6V transmitter battery included.


Required To Use
Everything is included
£39.99




                                                                                                         Page 133/219
                                                                                                                                  08/2011




RC Helicopters -/- 4Ch RC Helicopters




                     Walkera HM 4# Dragonfly 4ch RC Helicopter - 2.4Ghz
                     Model: WHM4


                     The HM 4# Remote Control Helicopter is the easy to control, easy to repair and fun to fly 4 channel helicopter from
                     Walkera. The 4# was developed for one reason - "To make a durable helicopter for the first time flyer and
                     help them to enjoy this hobby", and Walkera really have succeeded. If you want to learn how to fly a proper
                     single blade remote control helicopter then this is the best choice. The Walkera series of rc helicopters feature good
                     performance for superior strength, stability, controllable flight and durability. The HM 4# is designed with beginners
                     in mind and is completely assembled in the factory so you can be enjoying flying your helicopter within minutes of
                     opening the box. We've brought this helicopter as an upgrade to the Honey Bee V2 from Esky as they're
                     virtually identical but the Walkera has an upgraded LCD transmitter and is cheaper!


                     The rotor head is equipped with strong plastic parts, which makes it tough, and the frame structure is so simple
                     that breakages are rare, although not impossible! For the first time flyer, if you stock up on spare blades and extra
                     flybars then you're ready to start this hobby! If you have experience in controlling co-axial helicopters, this
                     helicopter is the ideal choice to bring you into the world of 4 channel tail rotor, true rc helicopters.


                     The transmitter and receiver have been upgraded to 2.4Ghz technology, which is more reliable and allows many
                     models to be used at the same time without having to change crystals in MHz tx systems.


                     Not only is it 2.4GHz but this transmitter has an LCD display, it is Walkera's latest model and has many other
                     useful features including the ability for the length or tension of the control sticks to be adjusted.It offers three
                     helicopter flight modes and each flight mode is capable of various settings and parameter adjustments; it has
                     frequency-hopping spread spectrum 2.4G technology and features automatic code pairing and ID assignment.


                     This advanced transmitter really makes this remote control helicopter package incredible value for money.


                     Features
                     Best model to learn to fly a single blade remote control helicopter.
                     Simple mechanical structure design, easy maintenance.
                     Durable Material, capable of bearing most crashes without any damage.
                     Fully assembled and tested in the factory.
                     Digital sub-micro servos offer precise and powerful control.
                     New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 models to
                     fly in the same field at the same time.
                     High performance 370SH motor powered by 7.4V 800mAh Lipo offers 10 to 12 minute flight time.


                     Specifications
                     Weight: 267g (Battery included)
                     Servo: weight 9.1g / speed 0.12sec/60o(4.8V)/ torque 1.1kgf.cm / dimension 22.5*11.8*27mm




                                                                                                                                  Page 134/219
                                      08/2011




Receiver: RX-2421
Gyro: Built-in
Battery: 7.4V 800mAh Li-Po
Transmitter: 2.4G LCD WK-2402
Tail Rotor Diameter: 146 mm
Main Rotor Diameter: 485 mm
Overall Length: 480 mm
Tail Motor: 1220FE33
Drive Motor: 370SH


Required To Use
8 AA batteries for the transmitter,


 
£99.99




                                      Page 135/219
                                                                                                                                  08/2011




RC Helicopters -/- 6Ch RC Helicopters




                     CopterX 450 Pro Torque Tube RTF 2.4G RC Helicopter
                     Model: CX450PROTT-R


                     Designed for the pilot in search of the best performance 450 helicopter on the market. The CopterX CX450 pro
                     helicopter was specifically conceived for high performance flight but with easy maintenance in mind. Constructed
                     from the finest quality components, this helicopter is a leader in its class. This is a shaft driven heli, the alternative
                     drive system for rc helicopters, and offers certain performance advantages over the belt driven copters.


                     No need to ever spend money upgrading the 450 Pro as all upgrades come as standard with full CNC aluminum or
                     carbon throughout. All parts are ball raced & aluminum parts were finished with a beautiful anodized grey. The
                     carbon blades are top of the line products & can really perform during heavy load conditions. A lot of parts on
                     the rotor head are over sized or hardened. 4mm feathering shaft, hardened aluminum alloy washout, oversize main
                     shaft lock collar, one piece swashplate, etc. All these allow high loading for extreme 3D maneuvers.


                     The tail drive system also features a light weight but rigid CNC & carbon construction including carbon tail
                     blades. A one piece carbon frame reduces the number of aluminum parts necessary for the frame resulting in a
                     light weight and rigid construction. All mounts are aluminum including a special composite canopy mount to reduce
                     vibration.




                     NB. These are the pictures of the kit version, hence it appears no electronics are included; however we are selling
                     the RTF version which includes all electronics and new pictures will be coming soon.


                     Package Contents: This is the RTF version and contains everything you need, apart from 8 x AA Batteries for the
                     transmitter.




                     CopterX CX 450SE V2 x 1


                     CopterX 3500Kv Brushless Motor x 1


                     CopterX 50A ESC x 1


                     CopterX 2.4G Transmitter & Receiver x 1


                     CopterX 9g Servos x 4


                     CopterX Gyro 240 x 1


                     Full Size Aluminum Case x 1




                                                                                                                                  Page 136/219
                                                                                                        08/2011




CopterX Balance UK Charger x 1


UK Switching Adapter x 1


CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£279.99




CopterX Black Angel Pro RC Helicopter - KIT Version
Model: CX450BA-KIT


Black Angel is one of the most advance 450 size 3D helicopters on the market. With it’s innovative design
and robust aluminium and carbon construction, Black Angel is able to offer performance rivals can only dream of.
The Black Angel is a completely new helicopter designed from the ground up. A lot of unique features are brand
new or only available for larger helicopters. Things like +/- 15 degree pitch range; carbon main and tail blade;
carbon fly paddle; one piece carbon fiber main frame; CNC main rotor and tail drive assembly; oversized bearing
and feathering shaft; pre painted fiber glass streamline canopy, etc. With it’s wide range of adjustability you
will be able to take the hobby to the highest level.


This model is available in a KIT Version or a RTF Version


FEATURE SUMMARY
 




+/- 15 extra wide pitch range


Over sized feathering shaft, screws, blade grip bearing etc. for low maintenance


4mm feathering shaft with thrusted bearing for accurate high load 3D operation


Hardened aluminum washout base & rudder slider is long lasting & light weight


240 reinforced swash plate for positive response


One piece CCPM swash plate design for durability


Simple head design for quick output and easy maintenance


Fully ball raced to handle head speed of 3500rpm+ & tail speed of 13600rpm+


Extra wide drive belt for trouble free and quick operation




                                                                                                        Page 137/219
                                                                                                       08/2011




Direct tail drive system weight saving and quicker response


Extra wide drive belt to ensure non slip and sensitive rudder control


High strength nylon main gear for quite and smooth operation


Precise high wear resistance aluminum alloy pulley set


One piece carbon fiber main frame for strength and durability


Light weight carbon bottom plate, ESC mount, battery mount & anti rotation bracket.


High strength aluminum alloy tail boom look • Aluminum alloy rudder servo mount


Light weight one piece composite landing skid


Plastic Canopy mounts to isolate canopy vibration


Light weight high strength glass fiber per painted canopy




No need to ever spend money upgrading the Black Angel as all upgrades come as standard with full CNC
aluminum or carbon throughout. All parts are ball raced & aluminum parts were finished with a beautiful
anodized grey. The carbon blades are top of the line products & can really perform during heavy load
conditions. A lot of parts on the rotor head are over sized or hardened. 4mm feathering shaft, hardened aluminum
alloy washout, oversize main shaft lock collar, one piece swashplate, etc. All these allow high loading for extreme
3D maneuvers. The tail drive system also features a light weight but rigid CNC & carbon construction including
carbon tail blades. The extra wide long life drive belt ensures positive rudder control during 3D maneuvers and belt
tensioners on both ends reduce the chance of skipping and derailing. A one piece carbon frame reduces the
number of aluminum parts necessary for the frame resulting in a light weight and rigid construction. All mounts are
aluminum including a special composite canopy mount to reduce vibration.


Package Contents:
Please note the Black Angel is available in either KIT form or RTF. The RTF version will still require some setup
but everything is included and it comes pre-built. The KIT version does not include any electronics and requires
some assembly.


KIT
CopterX CX450 Black Angel Kit x 1
(Please note that the KIT Version does not come with Aluminium carry case)


RTF
CopterX CX450 Black Angel Kit x 1
CopterX 3500Kv Brushless Motor x 1
CopterX 50A ESC x 1




                                                                                                       Page 138/219
                                                                                                        08/2011




CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 3
Fusonic High Speed Digital Servo x 1
CopterX Gyro 240 x 1
Full Size Aluminum Case x 1
CopterX UK Balance Charger x 1
Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£209.99




CopterX Black Angel Pro RC Helicopter - RTF Version
Model: CX450BA-RTF


Black Angel is one of the most advance 450 size 3D helicopters on the market. With it’s innovative design
and robust aluminium and carbon construction, Black Angel is able to offer performance rivals can only dream of.
The Black Angel is a completely new helicopter designed from the ground up. A lot of unique features are brand
new or only available for larger helicopters. Things like +/- 15 degree pitch range; carbon main and tail blade;
carbon fly paddle; one piece carbon fiber main frame; CNC main rotor and tail drive assembly; oversized bearing
and feathering shaft; pre painted fiber glass streamline canopy, etc. With it’s wide range of adjustability you
will be able to take the hobby to the highest level.


This model is available in a KIT Version or a RTF Version


FEATURE SUMMARY
 




+/- 15 extra wide pitch range


Over sized feathering shaft, screws, blade grip bearing etc. for low maintenance


4mm feathering shaft with thrusted bearing for accurate high load 3D operation


Hardened aluminum washout base & rudder slider is long lasting & light weight


240 reinforced swash plate for positive response


One piece CCPM swash plate design for durability


Simple head design for quick output and easy maintenance


Fully ball raced to handle head speed of 3500rpm+ & tail speed of 13600rpm+




                                                                                                        Page 139/219
                                                                                                       08/2011




Extra wide drive belt for trouble free and quick operation


Direct tail drive system weight saving and quicker response


Extra wide drive belt to ensure non slip and sensitive rudder control


High strength nylon main gear for quite and smooth operation


Precise high wear resistance aluminum alloy pulley set


One piece carbon fiber main frame for strength and durability


Light weight carbon bottom plate, ESC mount, battery mount & anti rotation bracket.


High strength aluminum alloy tail boom look • Aluminum alloy rudder servo mount


Light weight one piece composite landing skid


Plastic Canopy mounts to isolate canopy vibration


Light weight high strength glass fiber per painted canopy




No need to ever spend money upgrading the Black Angel as all upgrades come as standard with full CNC
aluminum or carbon throughout. All parts are ball raced & aluminum parts were finished with a beautiful
anodized grey. The carbon blades are top of the line products & can really perform during heavy load
conditions. A lot of parts on the rotor head are over sized or hardened. 4mm feathering shaft, hardened aluminum
alloy washout, oversize main shaft lock collar, one piece swashplate, etc. All these allow high loading for extreme
3D maneuvers. The tail drive system also features a light weight but rigid CNC & carbon construction including
carbon tail blades. The extra wide long life drive belt ensures positive rudder control during 3D maneuvers and belt
tensioners on both ends reduce the chance of skipping and derailing. A one piece carbon frame reduces the
number of aluminum parts necessary for the frame resulting in a light weight and rigid construction. All mounts are
aluminum including a special composite canopy mount to reduce vibration.


Package Contents:
Please note the Black Angel is available in either KIT form or RTF. The RTF version will still require some setup
but everything is included and it comes pre-built. The KIT version does not include any electronics and requires
some assembly.


KIT
CopterX CX450 Black Angel Kit x 1
(Please note that the KIT Version does not come with Aluminium carry case)


RTF
CopterX CX450 Black Angel Kit x 1




                                                                                                       Page 140/219
                                                                                                       08/2011




CopterX 3500Kv Brushless Motor x 1
CopterX 50A ESC x 1
CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 3
Fusonic High Speed Digital Servo x 1
CopterX Gyro 240 x 1
Full Size Aluminum Case x 1
CopterX UK Balance Charger x 1
Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£359.99




CopterX ME V2 Pro RC Helicopter - KIT Version
Model: CX450ME-KIT


The CopterX CX 450 V2 ME (eCCPM) represents the state of the art in micro helicopter technology by utilising the
latest design techniques and highest quality materials. This kit is for the flyers who want uncompromised
performance and quality to take the hobby to the highest level. The ME version is perfect for people who want a
proper 450 helicopter with all the features of the more expensive SE and BA versions but with a lower initial outlay.
The ME achieves this by keeping all the technology and layout the same but swaps some of the expensive carbon
and aluminium parts for aluminium and plastic. This model is available in a KIT Version or RTF version.


RC HELICOPTERS FEATURE SUMMARY:




The Aluminum frame improves the rigidity and is perfect for 3D flying.


SSG battery mounting plate connects to the main frame. It makes the center of gravity closer to the rotor blades
and reduces the correction needed when rolling.


High quality designed rotor head set provides smooth movements.


Uses Ball and Hiller two system mixing control. Through the simple structure of the Ball control system,
power-saving of the Hiller system and the CCPM control you can simultaneously control 3 servos for AILE, EVLE,
PIT 3 actions. This CCPM control system is great for 3D flying control and extending the life cycle of servos.


New streamlined skeleton makes the gyro more efficient.


New tail rotor control set, control piece and movable ball link for smooth pitch travel.


Adjustable flybar weight - When normal flying you can add the weights on the flybar paddles for stable flight.
When aerobatic flying remove the flybar weight for the flexibility of 3D actions.




                                                                                                       Page 141/219
                                                                                                            08/2011




New gear ratio (4.24:1) is suitable for the high KV brushless motor and provides more safety and reliability.


All the kit uses stainless steel linkage balls for wear resistance and anti-oxidization.


Great stable and sensitive mixing lever design gives great stability and precision for 3D flight.


CX 450ME special adjustable pitch system, hold rotation system and tail rotor drive belt system making this an
original and ground breaking helicopter.




The CX450 is one of the top spec Rc helicopters on the market for people who want to take the hobby to the
highest level. What's great about the ME version is that although to keep the costs down some of the
carbon/aluminium parts have been replaced with aluminium & plastic, they are all the same shape so can be
upgraded at any time. If you do not want the initial bigger outlay of the SE or BA versions then you can still get this
version with all the same technology and if you decide to later can upgrade it at your own pace. CCPM, anti
rotation, dual cooling fan, adjustable throughout etc., this helicopter has it all. The tail drive system also features a
light weight but rigid construction. The extra wide long life drive belt ensures positive rudder control during 3D
maneuvers and belt tensioners on both ends reduce the chance of skipping and derailing. The aluminium frame is
light weight and rigid. The ME version represents real value for money and you will not find another 450 scale rc
helicopters with these features at this low price.


RC Helicopters Package Contents:
Please note the CopterX 450ME V2 is available in either KIT form or RTF. The RTF version will still require some
setup but everything is included and it comes pre-built. The KIT version does not include any electronics and
requires some assembly.


KIT
CopterX CX 450ME V2 Kit x 1


RTF
CopterX CX 450ME V2 x 1
CopterX 3500Kv Brushless Motor x 1
CopterX 50A ESC x 1
CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 4
CopterX Gyro 240 x 1
CopterX Balance UK Charger x 1
UK Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£64.99




                                                                                                            Page 142/219
                                                                                                         08/2011




CopterX ME V2 Rc Helicopter - RTF Version
Model: CX450ME-RTF


The CopterX CX 450 V2 ME (eCCPM) represents the state of the art in micro helicopter technology by utilising the
latest design techniques and highest quality materials. This kit is for the flyers who want uncompromised
performance and quality to take the hobby to the highest level. The ME version is perfect for people who want a
proper 450 helicopter with all the features of the more expensive SE and BA versions but with a lower initial outlay.
The ME achieves this by keeping all the technology and layout the same but swaps some of the expensive carbon
and aluminium parts for aluminium and plastic. This model is available in a KIT Version or RTF version.


RC HELICOPTERS FEATURE SUMMARY:




The Aluminum frame improves the rigidity and is perfect for 3D flying.


SSG battery mounting plate connects to the main frame. It makes the center of gravity closer to the rotor blades
and reduces the correction needed when rolling.


High quality designed rotor head set provides smooth movements.


Uses Ball and Hiller two system mixing control. Through the simple structure of the Ball control system,
power-saving of the Hiller system and the CCPM control you can simultaneously control 3 servos for AILE, EVLE,
PIT 3 actions. This CCPM control system is great for 3D flying control and extending the life cycle of servos.


New streamlined skeleton makes the gyro more efficient.


New tail rotor control set, control piece and movable ball link for smooth pitch travel.


Adjustable flybar weight - When normal flying you can add the weights on the flybar paddles for stable flight.
When aerobatic flying remove the flybar weight for the flexibility of 3D actions.


New gear ratio (4.24:1) is suitable for the high KV brushless motor and provides more safety and reliability.


All the kit uses stainless steel linkage balls for wear resistance and anti-oxidization.


Great stable and sensitive mixing lever design gives great stability and precision for 3D flight.


CX 450ME special adjustable pitch system, hold rotation system and tail rotor drive belt system making this an
original and ground breaking helicopter.




The CX450 is one of the top spec Rc helicopters on the market for people who want to take the hobby to the
highest level. What's great about the ME version is that although to keep the costs down some of the
carbon/aluminium parts have been replaced with aluminium & plastic, they are all the same shape so can be
upgraded at any time. If you do not want the initial bigger outlay of the SE or BA versions then you can still get this
version with all the same technology and if you decide to later can upgrade it at your own pace. CCPM, anti




                                                                                                         Page 143/219
                                                                                                            08/2011




rotation, dual cooling fan, adjustable throughout etc., this helicopter has it all. The tail drive system also features a
light weight but rigid construction. The extra wide long life drive belt ensures positive rudder control during 3D
maneuvers and belt tensioners on both ends reduce the chance of skipping and derailing. The aluminium frame is
light weight and rigid. The ME version represents real value for money and you will not find another 450 scale rc
helicopters with these features at this low price.


RC Helicopters Package Contents:
Please note the CopterX 450ME V2 is available in either KIT form or RTF. The RTF version will still require some
setup but everything is included and it comes pre-built. The KIT version does not include any electronics and
requires some assembly.


KIT
CopterX CX 450ME V2 Kit x 1


RTF
CopterX CX 450ME V2 x 1
CopterX 3500Kv Brushless Motor x 1
CopterX 50A ESC x 1
CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 4
CopterX Gyro 240 x 1
CopterX Balance UK Charger x 1
UK Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£219.99




CopterX SE V2 Pro RC Helicopter - KIT Version
Model: CX450SE-KIT


The CopterX CX 450 V2 Superior Edition (eCCPM) represents the state of the art in micro helicopter technology by
utilising the latest design techniques and highest quality aluminium and carbon materials. The aluminum parts are
anodized in a fantastic looking blue color which really stand out against the high gloss carbon frame. This kit is for
the flyers who want uncompromised performance and quality to take the hobby to the highest level.


This model is available in a KIT Version or a RTF Version.


FEATURE SUMMARY




New CNC carbon frame improves the rigidity and is perfect for 3D flying.


CCPM collective pitch version with new aluminum parts for prompt, precision action.




                                                                                                            Page 144/219
                                                                                                           08/2011




SSG battery mounting plate connects to main frame. It makes the center of gravity closer to the rotor blades
reducing the correction needed after 3D maneuvers.


Rigid CNC aluminum rotor head for precise and smooth movements.


Uses Ball and Hiller two system mixing control.


CCPM control can simultaneously control 3 servos for AILE, EVLE & PIT actions. This CCPM control system
is great for 3D flying control and extending the life cycle of servos.


New streamlined carbon tail rotor blades makes the gyro more efficient.


New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.


Adjustable flybar weight - When normal flying you can add the weights to the flybar paddles for stable flight. When
aerobatic flying you can remove the weights for added flexibility.


CNC Metal tail unit and tail holder use high rigid aluminum.


New gear ratio(4.24:1), suitable for the higher KV motor.


Uses aluminum alloy drive pulley and tail drive pulley for high rigidity and wear resistance. It is efficient to reduce
the rotation loss and makes it smoother.


Stainless steel anti-oxidization linkage balls are used throughout and are wear resistant


Tail rotor hub is made of stainless steel and is very rigid.


Great stable and sensitive mixing lever design. Gives high stability and precision for 3D flight.


CX 450SE special adjustable pitch system, hold rotation system and tail rotor drive belt system makes this a
fantastic and original helicopter.




The CX450 SE is one of the top spec helicopters on the market. No need to ever spend money on upgrades as the
SE has them all prefitted. To buy a standard helicopter and then upgrade it to this level would cost many times
more. With full CNC aluminum or carbon throughout the CX450SE is a tough and higly capable model for extreme
flying. All parts are ball raced & a lot of parts on the rotor head are over sized or hardened. Not only are the
materials high spec but so is the technology making this an amazing package.


CCPM, anti rotation, dual cooling fan, adjustable throughout etc., this helicopter has it all. The tail drive system
also features a light weight but rigid CNC & carbon construction. The extra wide long life drive belt ensures
positive rudder control during 3D maneuvers and belt tensioners on both ends reduce the chance of skipping and
derailing. The carbon frame is light weight and rigid. All mounts are aluminum including a special composite canopy
mount to reduce vibration.




                                                                                                           Page 145/219
                                                                                                         08/2011




KIT
CopterX CX 450SE V2 Kit x 1
(Please note that the Kit version does not come with Aluminimum carry case)


RTF
CopterX CX 450SE V2 x 1
CopterX 3500Kv Brushless Motor x 1
CopterX 50A ESC x 1
CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 4
CopterX Gyro 240 x 1
Full Size Aluminum Case x 1
CopterX Balance UK Charger x 1
UK Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£124.99




CopterX SE V2 Pro RC Helicopter - RTF Version
Model: CX450SE-RTF


The CopterX CX 450 V2 Superior Edition (eCCPM) represents the state of the art in micro helicopter technology by
utilising the latest design techniques and highest quality aluminium and carbon materials. The aluminum parts are
anodized in a fantastic looking blue color which really stand out against the high gloss carbon frame. This kit is for
the flyers who want uncompromised performance and quality to take the hobby to the highest level.


This model is available in a KIT Version or a RTF Version.


FEATURE SUMMARY




New CNC carbon frame improves the rigidity and is perfect for 3D flying.


CCPM collective pitch version with new aluminum parts for prompt, precision action.


SSG battery mounting plate connects to main frame. It makes the center of gravity closer to the rotor blades
reducing the correction needed after 3D maneuvers.


Rigid CNC aluminum rotor head for precise and smooth movements.


Uses Ball and Hiller two system mixing control.




                                                                                                         Page 146/219
                                                                                                           08/2011




CCPM control can simultaneously control 3 servos for AILE, EVLE & PIT actions. This CCPM control system
is great for 3D flying control and extending the life cycle of servos.


New streamlined carbon tail rotor blades makes the gyro more efficient.


New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.


Adjustable flybar weight - When normal flying you can add the weights to the flybar paddles for stable flight. When
aerobatic flying you can remove the weights for added flexibility.


CNC Metal tail unit and tail holder use high rigid aluminum.


New gear ratio(4.24:1), suitable for the higher KV motor.


Uses aluminum alloy drive pulley and tail drive pulley for high rigidity and wear resistance. It is efficient to reduce
the rotation loss and makes it smoother.


Stainless steel anti-oxidization linkage balls are used throughout and are wear resistant


Tail rotor hub is made of stainless steel and is very rigid.


Great stable and sensitive mixing lever design. Gives high stability and precision for 3D flight.


CX 450SE special adjustable pitch system, hold rotation system and tail rotor drive belt system makes this a
fantastic and original helicopter.




The CX450 SE is one of the top spec helicopters on the market. No need to ever spend money on upgrades as the
SE has them all prefitted. To buy a standard helicopter and then upgrade it to this level would cost many times
more. With full CNC aluminum or carbon throughout the CX450SE is a tough and higly capable model for extreme
flying. All parts are ball raced & a lot of parts on the rotor head are over sized or hardened. Not only are the
materials high spec but so is the technology making this an amazing package.


CCPM, anti rotation, dual cooling fan, adjustable throughout etc., this helicopter has it all. The tail drive system
also features a light weight but rigid CNC & carbon construction. The extra wide long life drive belt ensures
positive rudder control during 3D maneuvers and belt tensioners on both ends reduce the chance of skipping and
derailing. The carbon frame is light weight and rigid. All mounts are aluminum including a special composite canopy
mount to reduce vibration.


KIT
CopterX CX 450SE V2 Kit x 1
(Please note that the Kit version does not come with Aluminimum carry case)


RTF
CopterX CX 450SE V2 x 1
CopterX 3500Kv Brushless Motor x 1




                                                                                                           Page 147/219
                                                                                                          08/2011




CopterX 50A ESC x 1
CopterX 2.4G Transmitter & Receiver x 1
CopterX 9g Servos x 4
CopterX Gyro 240 x 1
Full Size Aluminum Case x 1
CopterX Balance UK Charger x 1
UK Switching Adapter x 1
CopterX Li-Polymer Battery 11.1V 15C 2200mAh x 1
£249.99




NINJA 400 6ch RTF 2.4GHz Remote Controlled Helicopter
Model: KHN400-3


The Ninja 400 is brand new to the market and is a top of the range remote controlled helicopter from Skyartec. It is
a big 400 size helicopter aimed at intermediate to advanced pilots. This high spec model is one of the most
advanced we sell not to mention one of the best quality electric helicopters on the market. The Ninja 400 version is
the replacement to the King 3 from Esky. It is the step up from Wasp V3 and is feature packed for extreme stunts
and tricks. If you have had a 4ch or 6ch radio controlled helicopter before and want to take the hobby to the next
level then this model can go all the way.


The main differences between a standard 6ch helicopter and this are:




Belt driven tail - Unlike other models which have a separate motor on the tail this has a new belt driven tail system
for precise aerobatic actions and more reliable performance. The tail system has a slipper clutch to help avoid
damage if you crash it. 


Sturdier construction - The Ninja features a metal tail boom, strong fins and bulkier parts all round. 


Aluminium and carbon construction for strength and lightweight.


Brushless motor - This powerful large current motor gives enough torque to pull off the most demanding
stunts. 


Separate gyro etc - Most helicopters have an all in one mixer, receiver, speed controller and gyro. This is great for
a simple radio controlled helicopter but for a stunt helicopter like this an all in one unit would not be enough. The
Ninja therefore comes with separate high quality receiver/mixer, speed controller and Gyro making it highly
adjustable and reliable. 


Upgradeable - The Ninja features upgradeable parts which are available from our upgrade section, the model can
be kitted out with metal parts, and other enhancements.




                                                                                                          Page 148/219
                                                                                                   08/2011




New 7 channel Transmitter.




What's the Ninja got to offer?


This all new Ninja 400 version has some major improvements and advantages over some other models in its class:




New brushless motor and ESC for more power 


Skyartec's all new head lock gyro for sport flying and 3D acrobatics 


Digital servos 


Upgraded battery from 1000mah to 1500mah 


New high-tech radio system 


Improved main frame. These upgrades all work together to give the Ninja 400 increased stability, power and
accuracy as well as giving more direct control to the pilot.




Features:
Completely assembled and tested at the factory.
120 degree ECCPM control system.
New High-tech 6-channel RC system.
High performance Heading Lock gyro is Capable of sport flying and 3D aerobatics.
Digital Sub-Micro servos and Micro Heading Lock gyro offer precise and powerful control.
Stainless steel fly bar, main shaft and tail shaft.
High Performance 4500KV out-runner brushless motor used as the main drive makes the flight much stable and
gives more power.
Auto-rotation landing system.
Precise control and hovering.
Suitable for indoor/outdoor use.
Ultra-tough and resilient but lightweight structure.
Belt Drive System.
High Inertial Main Blade.
High Rigidity Iron Main Shaft.
Full Ball Bearing & Metal Ball End.
High rigidity alloy tail boom.
High Strength Tail Stand.


Specifications:
main rotor diameter: 580mm
main motor type: BL 4500kv
main body length: 550mm




                                                                                                   Page 149/219
                                                                                                          08/2011




Average flight time approx :10min
Flight Weight: 440g
Battery type: 11.1V 1100mAh Li-Po
Radio system: 7ch 2.4G
Main Rotor RPM: 3000


Required to use:
Everything you need is in the box except for:
8 AA batteries for the transmitter
£169.99




Wasp V3 6ch CCPM RTF 2.4GHz RC Helicopter
Model: KHWH03-7


The Wasp V3 radio controlled helicopter is the latest 6 channel aerobatic helicopter with collective pitch and belt
driven tail rotor. Not to be confused with the normal radio controlled helicopters that are on the market, this is an
advanced model with wooden blades and more stable flight giving the ability to fly upside down and perform
advanced stunts both indoors and outdoors. If you are looking for a helicopter that can do more than the standard
movements and want to try something that can fly at high speeds and perform stunts then this is the helicopter to
go for.




The WASP V3 is suitable for both indoor and outdoor flying as the collective pitch rotor head allows quick response
on control inputs and copes easily with windy outdoor conditions. Not only can you learn how to fly a 6 channel
helicopter with this model but you can then take the hobby so much further with the advanced performance abilities.


 


The Wasp V3 replaces the old Honey Bee CP3 and has been upgraded and improved in many ways. As well as
looking better the helicopter has been constructed from lightweight but strong carbon and aluminium, giving you a
much more resilient helicopter, but without adding to it's weight. It also has stronger parts used throughout
including much thicker landing skids to protect it from heavy landings. The electronics have been upgraded with
digital servos and new brushless motor that along with the belt drive system and aluminium parts make it much
better value for money than the old Honey Bee CP3 that uses a brushed motor setup.


 


The transmitter and receiver have been upgraded to the new 2.4Ghz technology. 2.4Ghz is more reliable and
allows many models to be used at the same time without having to change crystals like with the older MHz
versions.


 




                                                                                                          Page 150/219
                                                                                                     08/2011




This model is designed with German know-how. It can be flown easily near the ground, and is highly
damage-resistant. It has been designed to allow people to learn to fly before moving to the next more expensive
models. The WASP V3's light and handy design is ideal for beginners due to its small body and good stability.
Expert pilots will also enjoy this model however, because of its 3D acrobatic capabilities.


Features:
CCPM system allows more aerobatic actions and tricks.
Belt driven tail rotor.
Symmetrical stronger wooden airfoil has better aerobatic characteristics.
Powerful brushless motor allows indoor and outdoor use.
370 super motor provides super power for high performance flight.
Simple mechanical structure design, easy maintenance.
Durable Material, capable of bearing most crashes without any damage.
High performance main rotor blade significantly increase the strength for performing advanced 3D maneuvers.
Adjustable Pitch Control System, stainless steel Fly Bar.
Fully assembled and tested in the factory.
New high-tech 7-channel 2.4G rc transmitter system.
Digital sub-micro servos offer precise and powerful control.


Specifications:
Main Rotor Diameter: 475mm
Length: 450mm
Flying Weight: 293g (Battery included)
Driven system: Skyartec 4500KV brushless motor
Gyro: Skyartec Head Lock
Servo: 3X Skyartec 9g,1X Skyartec 5g
ESC: Skyartec 15A
Battery: Skyartec 7.4V 900mAh Lithium Li-Po
Control system: SKY703 2.4GHz 7 channel Transmitter and Receiver
Radio Control Range: 2500 feet (762m)


Required to use:
Everything you need is in the box except for:
8 AA batteries for the transmitter




 
£129.99




                                                                                                     Page 151/219
                                                                                                         08/2011




WASP V4 Belt 250 RTF 2.4G RC Helicopter
Model: KHWH05-2


Skyartec's new flagship model is the Wasp V4 Belt 250. This is Skyartec's highest spec helicopter and
one of the best helicopters available on the market. Aimed at intermediate to advanced pilots it is capable of
extreme stunts and maneuvers. For people who want to take this hobby all the way to the professional level this is
the helicopter to go for.


This brand-new WASP V4 BELT 250 helicopter which is equipped with 7-channel 2.4GHz transmitter, is designed
to be a high performance, easy to control, stable, durable,and lightweight helicopter. It uses Cyclic Collective Pitch
Mixing (CCPM), and is constructed from metal and carbon for strength and lightness.


Its brushless motor is driven by a powerful 11.1V Li-po battery.


Everything about the helicopter has been designed for precise extreme flying. Massive power is provided from the
4500 KV brushless motor and generous 900mAh Li-Polymer battery allowing this helicopter to do things that others
would simply can't. The Wasp V4 comes fully built with radio equipment included and also features a new
head lock gyro that aids in sport flying and aerobatics. The construction and design is high quality with alloy parts
used where needed.


The Wasp V4 Belt 250 uses a belt driven tail rotor which is superior to the separate tail motor system used on
entry level models. The helicopter has also been made stronger with a steel fly bar, main shaft and tail shaft along
with a strong tail stand and shock proof metal landing skids. Ball bearings are used throughout instead of the
normal metal bearings and a high inertial main blade is used to create even more lift. The included radio system is
Skyartec's latest feature packed high quality 7ch transmitter with digital servos used in the helicopter for more
precise control.


You can expect extremely smooth control and stable flight, with precise controlling and hovering, whether you are
flying this outdoors or in a large indoor space. As mentioned earlier tough carbon fibre and Aluminum Alloy
materials, are used in the helicopters construction giving it the best of both worlds - light and strong. Approximately
15 minutes flight time on each charge, but you can order a spare battery and extend your flying time. Complete Kit,
Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter not included)


Features:
Completely assembled and tested at the factory.
120 degree eCCPM control system.
New high-tech 7-channel 2.4Ghz RC system
High performance head lock gyro is capable of sport flying and 3D aerobatics.
Digital sub-micro servos and micro head lock gyro offer precise and powerful control.
Stainless steel fly bar, main shaft and tail shaft.
4500KV brushless motor, 18A brushless ESC and 3S 11.1V 900mAh 20C Li-Po battery deliver incredible power
and performance.
Auto-rotation system
Belt drive system
High inertial main blade
Shock proof iron landing skids




                                                                                                         Page 152/219
                                                  08/2011




Full ball bearings and metal ball ends
Strong carbon fibre tail stand


Specifications
Main Rotor Diameter : 470mm
Length : 460mm
Flying Weight : 330g
Driven system : Skyartec 4500KV brushless motor
Gyro : Sky600 Head Lock
Serv : 3X Skyartec 9g + 1X Skyartec 5g
ESC: Skyartec 18A
Battery : Skyartec 11.1V 900mAh Lithium Li-Po


Required to use:
Everything you need is in the box except for:
8 AA batteries for the transmitter


 
£189.99




                                                  Page 153/219
                                            08/2011




RC Helicopters -/- Co-Axial RC Helicopter




                                            Page 154/219
                                                                                                           08/2011




Esky Chinook 4CH RC Helicopter - 2.4GHz
Model: 8002328


The all new Chinook helicopter from Esky looks fantastic and is great fun to fly. This is a proper 4ch helicopter
giving it full 3d control including banking left and right which is something that the other 3ch ones on the market can
not do. It also has a high capacity 7.4v li-po battery giving loads of power and proper Esky radio equipment giving it
a much greater range. The Chinook has four sets of blades powered by four separate motors and along with the
built in gyro and digital servos make this helicopter fun and responsive to fly.


The Chinook is available in two different styles. A coast guard finish as per the picture at the top or a military
camouflage finish as can be seen in the picture below.


The Chinook comes totally pre built with everything needed to get flying included in the box. The helicopter radio
equipment is the latest high quality 2.4Ghz version from Esky which makes it very reliable and also means that
many helicopters can be used at the same time without interfering with each other. Included in the kit is also some
spare blades in case you damage the original ones.


Features
Completely assembled and tested at the factory.
Twin coaxial rotor systems.
Four high performance micro motors provide the ultimate in thrilling flight.
Uses the latest 2.4GHz radio control system technology.
Two high performance micro digital servos.
3 in 1 control unit provides amazing stability that newcomers will find reassuring.


Specifications
Length: 251mm
Width: 56mm
Height: 153mm
Rotor diameter: 210mm
Weight: 145g
Motors: 4 x N30
Transmitter/Receiver: 2.4GHz 4CH
Battery: 7.4V 450mAh Li-polymer
3in1Controller (gyro, mixer, ESC)
Servos: Digital 4g, 0.5kg/cm, 0.12s/60°


Required To Use
Nothing extra needed, everything is included.
£89.99




                                                                                                           Page 155/219
                                                                                                          08/2011




Esky Co-Comanche 4CH RC Helicopters- 2.4Ghz Version
Model: 8000007


The Co-Comanche is one of the coolest looking RC helicopters on the market. Unlike the usual boring shells that
come with most helis, this one comes with a realistic looking camouflaged army style. The model is based on the
RAH-66 Co-Comanche which is a new helicopter being used for reconnaissance missions and assaults on land
forces.


The helicopter was designed by ESky as a 4CH helicopter with a co-axial, double rotor blade system. This makes
it very easy to fly so can been flown by anyone with minimum practice and are therefore a great way to get into the
hobby. You can have all the fun and thrills of flying a proper rc helicopter but without the hours of practice. There
are many twin blade RC helicopters on the market now but the Comanche is in a league of it's own with much
better performance and agility. Not to be confused with the toy twin blade helis, this is a proper model featuring a
proper 4 channel controller, long lasting lithium battery and gyro.


The Comanche comes with everything included in the box including the fully built heli, instructions, 4 ch controller,
lithium battery, lithium charger, UK 240V ac/dc adaptor, 12V car battery adaptor, AA batteries for the controller, a
flight simulator software programme and even a couple of spare blades in case you break one. It comes in a cool
display box which makes it a great gift for any teen or big kid!


The Comanche comes with a high quality 4ch controller. You can choose between the Mhz version with
changeable frequency crystals or the Ghz version which does not require different crystals to be used with other
models in the same area. Both are UK mode 2 which means that the throttel control is on the left hand side. This is
a proper radio set that you should not confuse with the ones that come with the toy RC helicopters which have a
very short range. These ones have a range of hundreds of meters!


This helicopter was designed with a divided canopy and fuselage connected by a carbon fibre rod which is
practical and looks great. There are three sliding wheels in the landing strut, which can slide automatically while
taking off and landing. The ornamental tail houses a ducted rotor blade that actually rotates automatically when
flying the helicopter! ESKY's original transmitter to computer cable is included in the pack. Installing the flight
simulator software from the enclosed disc on your computer and connecting the simulator port in the transmitter to
the computer will allow you to practice your flying on your computer before going for your real flight!


Features
Novel and distinct sculpt with high emulation art
Designed for beginner and is suitable for indoor flight
Lifter pulley and culvert tail rotor design ensure a more enjoyable flight
Airline operation with graceful movements and sensitive reaction
RTF after unwrapping the packing and fixing the battery and dispense with debugging
Flight simulator software and cable are included as well as four spare blades.


Specifications
Main rotor diameter:340mm
Weight:242g
Length:435mm,width:95mm,height:185mm
Power system:180 motor*2




                                                                                                          Page 156/219
                                                                                                             08/2011




RTF
Transmitter: 4CH (including training switch and simulator port. 2.4 Ghz
4 in 1 mix controller (W/gyro,mixer,ESC,receiver)
Servo:(8g,1.3kg.CM,0.12s/60¡)
Battery:7.4V 800mAh Li-polymer battery


Required To Use
Nothing extra needed, everything is included.
£89.99




Walkera HM Comanche Co-axial 4ch RC helicopter
Model: W54Q4


This is the latest 2.4Ghz Walkera RAH-66 Comanche 5#4Q4, radio controlled helicopter!


As you can see, it looks stunning, and is finished to a great level of detail and quality of finish. It comes in a
Ready-To-Fly package with all things you need to get started, other than 8 AA batteries for the transmitter. It is very
stable and easy to fly, even a complete novice will have this chopper flying around quite happily with in an hour or
so. This is the top model with the upgraded metal rotor head and 2.4GHz LCD transmitter, making it an excellent
package and great value for money.


Its overall length is about 336mm. With compact 90 degree swashhplate structure, the servo and other parts are
easy to install. The tiny 4-in-1 controller has an integrated Receiver, ESC, Gyro and Mixer with high sensitivity and
strong resistance to interference.


The transmitter and receiver have been upgraded to 2.4Ghz technology, which is more reliable and allows many
models to be used at the same time without having to change crystalsas in MHz tx systems.


Not only is it 2.4GHz but this transmitter has an LCD display, it is Walkera's latest model and has many other
useful features including the ability for the length or tension of the control sticks to be adjusted.It offers three
helicopter flight modes and each flight mode is capable of various settings and parameter adjustments; it has
frequency-hopping spread spectrum 2.4G technology and features automatic code pairing and ID assignment.


With the Li-po batteries you should get approximately 15 or more minutes flight time on each charge, which is
plenty of time to hone your skills, but why not order a spare or two and extend the amount of time you can have
piloting your heli. The Co-Comanche is a great choice for a beginner, and someone who is thinking of moving on to
larger tail-rotor helicopters, as training with these gives you a good grounding in the hand to eye coordination and
spacial awareness required to fly all helicopters, but without the complex controls of the single rotor and 6 channel
choppers.


Features
•CNC-machined metal rotor head and coaxial format, with state-of-the-art workmanship.




                                                                                                             Page 157/219
                                                                                                           08/2011




•New 2.4G spread spectrum technology, with the functions of automatic code pairing and ID assignment.
Allows many RC helis to fly in the same field at the same time.
•It utilizes the 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro
sensitivity adjustment.
•High performance 2 x 180PH motor, powered by 7.4V 800mAh Lipo, offers 10-to 12-minute flight time,
depending on the flight modes.


Specifications
Tail Rotor Dia. B : 410 mm
Main Rotor Dia. A : 410 mm
Gyro: Built-in
Drive Motor: 2*180PH
Receiver: RX-2403D
Weight: 269g (Battery included)
Transmitter: WK-2402
Battery: 7.4V 800mAh Li-Po
Overall Length: 336 mm
Servo: WK-7.6-3 ;weight 8.4g ;speed 0.12sec/60o(4.8V) ;torque 1.4kgf.cm(4.8V) ;dimension 22.5X11.5X24mm


Required To Use
8 AA batteries for transmitter
£114.99




                                                                                                           Page 158/219
                                      08/2011




RC Helicopters -/- Mini Helicopters




                                      Page 159/219
                                                                                                          08/2011




Z008 Mini 4ch RC Helicopter RTF with Gyro and USB
Model: MRH-Z008


This palm size helicopter 4 channel helicopter is amazing! This tiny heli is able to move in 6 directions, including
spinning on its own axis, just like the real thing!


The light but strong metal body frame protects the helicopter from those inevitable crashes, though not
indestructible it won't break easily. The blades too are made of a flexible plastic and so are much more able to
survive any collisions.


Though it has 4 channels and is highly manouvreable, it's co-axial twin rotor design makes it very easy to fly
and even a complete novice should be able to control it perfectly after about half an hour. Another great feature is
that you can choose from one of three frequencies so you and your friends can fly up to three of these at the same
time!


It charges via the transmitter or alternatively by plugging it into the USB slot on your Mac or PC, which should
mean you can charge it up pretty much anywhere.


This is a brilliant model and a fantastic introduction to rc helicopters. Suitable from the age of about 8 upwards to
108! It comes in either the blue or red variety depending on stock.


Features
You can charge the heli through transmitter or computer through USB wire
Z008 allow you to play with 3 helis at the same time with your friends, as it offers 3 selectable bands
Coaxial design makes flying this model easy
The newly designed body enhances the stability and balance of the heli
Built-in Gyro and 4 motors allows fast, stable flight, with anti-rotation control


Specifications
Overall Size: 20x13x12cm
Channels: 4 Channels (Rotate Clockwise/Anti-Clockwise, Move Left/Right, Move Forward/Backward/Up/Down)
Charging Time: Approx.: 40 minutes
Flight Duration: 5 – 8 minutes
Battery: 3.7V 140 mAh Lipo
Remote Bands: 3 Selectable Bands


Required To Use
6 x AA batteries for the transmitter
£34.99




                                                                                                          Page 160/219
                                                                                                                              08/2011




RC Jets -/- 55mm EDF Fan Jets




                   A-4 Blue Angels Skyhawk 4CH EDF 55mm RC Jet
                   Model: ST-D22A


                   The Douglas A-4 Skyhawk is a delta winged, carrier-capable, ground-attack aircraft designed for the United States
                   Navy and U.S. Marine Corps. Fifty years after the aircraft's first flight, and having played key roles in conflict
                   including the Falkland's War, some of the nearly 3,000 Skyhawks produced remain in service.


                   The A-4 Skyhawk was used by the Blue Angels between 1974 and 1986. The Blue Angels are the US Navy's
                   Navy Flight Demonstration Squadron; they first performed in 1946 and are currently the world's oldest flying
                   aerobatic team. The striking blue and yellow planes are supremely capable, aerobatic performers.


                   Starmax have produced an excellent replica of the A-4 in these stunning Blue Angel colours. The EPO foam
                   fuselage is both strong and extremely light, designed to withstand the occasional crash landing. The authentic
                   decals finish off the look and you are presented with a fantastic looking model. The A-4 has a powerful brushless
                   motor and a 55mm fan, this is a smaller fan than our other jets, and is an ideal entry level into the world of model jet
                   piloting. Despite its smaller fan, the Skyhawk is no slouch and this model is capable of 90mph!


                   This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
                   about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
                   The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
                   even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


                   The delta wing design and lightweight fuselage enable this aeroplane to be supremely manoeuverable and in the
                   right hands will take your breath away with the 3D aerobatics it can pull off. Stunts the A-4 is capable of include:
                   inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all
                   possible. If you're really good you will be able to perform the famous 'Cobra Manoeuvre' with your
                   A-4.


                   This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
                   everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
                   transmitter. The A-4 is also available in a grey colour scheme, for those who prefer a more military look and feel to
                   their model aircraft, whatever colour you choose, they both have the same awesome power and handling.


                   Features
                   Pre-painted foam fuselage & wings
                   90% assembled
                   Pre-installed electrics
                   CAD engineering quality
                   Stunning paintwork
                   55 mm electric ducted fan




                                                                                                                              Page 161/219
                                       08/2011




State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Powerful batteries
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 468mm
Length: 680mm
Flying Weight:450g
Wing area: 7dm²
Wing Load: 65g/dm²
Radio System: 4Ch Tx and 6 Ch Rx
Four 9 gram servos
55mm Ducted fan
Brushless motor
30A ESC
Battery: 3 Cell Li-Po,1300 mAh,11.1V


Required To Use
8 x AA Batteries
£139.99




                                       Page 162/219
                                                                                                                                08/2011




RC Jets -/- 64mm EDF Fan Jets




                   Alpha Jet Camo 64mm 5CH RC EDF Jet Plane - 2.4GHz
                   Model: ST-X25B


                   The Dassault/Dornier Alpha Jet is a light attack jet and advanced trainer aircraft, jointly manufactured by Germany
                   and France. It is the main rival of the BAe Hawk, although it hasn't been made in as great numbers, it has
                   been supplied to the French Air Force, Luftwaffe, Royal Thai Air Force, and the Portuguese Air Force amongst
                   others.


                   Being so light and powerful makes the Alpha perfect for aerobatics and is used by the Patrouelle de France flight
                   demonstration team to spectacular effect. The Red Bull company also own an Alpha and use it for their own
                   demonstration purposes, painted in their own livery.


                   Starmax have worked their usual wonders in the finish and design of this foam structured plane. The fuselage is
                   both strong and extremely light, designed to withstand the occasional crash landing. It is complete with a detailed
                   paint job and looks ready for air to air combat. What all this adds up to is an exceedlingly rapid and nimble jet. In
                   this model we have a 64mm ducted fan with powerful 14.8v battery, 5ch electronics controlling the aileron, rudder,
                   elevator and the throttle. This gives you one of the fastest and most agile model aeroplanes on the market for this
                   price. This plane will travel at speeds in excess of 100mph. You will not be disappointed! The fifth channel:
                   that's used for dropping a scale bomb!


                   It's not just the Patrouelle de France who can perform aerobatics in an Alpha; once you've mastered
                   this jet you'll be able to attempt stunts such as: inside loops, outside loops, axial rolls, inverted flight, knife
                   edge, stall turns, hammerheads, and spins are all possible. If you're really good you will be able to perform the
                   famous 'Cobra Manoeuvre' with your Alpha.


                   This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
                   about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
                   The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
                   even in windy conditions. This aeroplane can take off from the ground or can be hand launched


                   This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
                   everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
                   transmitter. The model comes with a choice of US or Luftwaffe decals.


                   Features
                   Pre-painted foam fuselage & wings
                   90% assembled
                   Pre-installed electrics
                   CAD engineering quality
                   Stunning paintwork




                                                                                                                               Page 163/219
                                                                                                               08/2011




64mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Powerful batteries
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 745mm
Length: 980mm
Fly Weight: 740g
Wing Load: 56g/dm²
Radio: 2.4G ( 5Ch Tx and 6 Ch Rx)
Seven 9 gram servos
64mm Ducted fan
Brushless Powered: Powerful 2601 outer runner brushless motor
30A/45A ESC
Battery: 4 Cell Li-Po, 2200 mAh,14.8V


Required To Use
8 x AA Batteries
£169.99




AMX Red Vectored Thrust 64mm 5CH RC EDF Jet
Model: ST-X24A


The AMX International AMX "Ghibli" is a ground-attack aircraft which has been specifically designed for
battlefield interdiction, close air support and reconnaissance missions. The AMX is capable of operating at high
subsonic speed and low altitude, by day or night, and if necessary, from bases with poorly equipped or damaged
runways.It was built in a joint venture between Brazil and Italy. Low IR signature and reduced radar equivalent
cross-section help prevent detection, while low vulnerability of structure and systems aid survivability. Integrated
ECM, air-to-air missiles and nose-mounted guns provide self-defence capabilities. This combination of features
enabled the Italian Air Force's AMX squadrons to fly 252 combat sorties over Kosovo as part of Operation
Allied Force, without a single loss.


The AMX has something extra for you though: it features vectored thrust.


Thrust vectoring is the ability of an aircraft to direct the thrust from its engine(s) in a direction other than parallel to
the vehicle's longitudinal axis. The technique was originally employed to provide upward vertical thrust as a
means to give aircraft vertical (VTOL) or short (STOL) takeoff and landing ability. Soon, it was realised that using
vectored thrust in combat situations enabled aircraft to perform manoeuvres not available to conventional-engined




                                                                                                              Page 164/219
                                                                                                           08/2011




planes.


So, what does all this mean? Well, you've got a 64mm ducted fan with powerful 14.8v battery, and 5ch
electronics. Coupled with the vectored thrust, this gives you one of the fastest and most agile model aeroplanes on
the market for this price. This plane will travel at speeds in excess of 100mph. You will not be disappointed!


The power that this plane packs allows it to perform a full aerobatic display: inside loops, outside loops, axial rolls,
inverted flight, knife edge, stall turns, hammerheads, and spins are all possible. If you're really good you will
be able to perform the famous 'Cobra Manoeuvre' with your AMX.


This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
transmitter.


Features
Pre-painted foam fuselage & wings
90% assembled
Pre-installed electrics
CAD engineering quality
Stunning paintwork
64 mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Powerful batteries
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 692mm
Length: 868mm
Flying Weight: 680g
Wing area: 9dm²
Wing Load: 75g/dm²
Radio: 2.4G (4Ch Tx and 6 Ch Rx )
Four 9 gram servos
64mm Ducted fan
Brushless Powered: Powerful 2061 outer runner brushless motor
45A ESC
Battery: 4 Cell Li-Po, 2200 mAh,14.8V




                                                                                                           Page 165/219
                                                                                                             08/2011




Required To Use
8 x AA Batteries
£159.99




F-35 Lightning 64mm Grey RC EDF Jet PNP Version
Model: ST-D04A-PNP


The Lockheed Martin F-35 Lightning II is a, single-seat, single-engine, stealth multirole fighter, that can perform
close air support, tactical bombing, and air defense missions. The F-35 is intended to be the world's premier
strike aircraft and to be active until 2040, with close and long-range air-to-air capability.


The F-35 is required to be four times more effective than existing fighters in air-to-air combat, eight times more
effective in air-to-ground combat, and three times more effective in reconnaissance and suppression of air
defenses – all while having better range and requiring less logistics support!The first flight of the F35 was in
2006.


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


This scale model of the F-35 has been carefully designed using CAD technology and, this is evident in the realistic
and high quality finish seen in this plane. All parts are pre-painted to a high level of detail, the jet really does look
fantastic, and as an added bonus it's 95% built straight out of the box, with only a few stages of assembly and
components needed to complete before you can take to the air.


All the Starmax jets are seriously big, large-scale models and this is no exception, it is 840mm long and has a
640mm wingspan, which not only means it looks great, but adds to its stability.


This plane is incredibly stable and has well proportioned, controllable power; you only need to nudge the throttle
gently and the F35 will shoot down your runway and take off. It will take off either from the ground or can be
launched from the hand, and when it is launched, the F35 accelerates like a rocket and takes to the air with ease,
and looks absolutely awesome when in flight.The Lightning can perform a whole host of aerobatics in skilled hands,
but due to its stability it is a suitable choice of aeroplane for someone wishing to learn the thrills of model jets. That
said, this plane can do in excess of 90mph!!


The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


Features
Pre-painted foam fuselage & wings
Some Pre-installed electrics
CAD engineering quality




                                                                                                             Page 166/219
                                                                                                         08/2011




Stunning paintwork
64mm electric ducted fan
State of the art components
Can perform amazing aerobatics
Is capable of the 'Cobra Manoeuvre'
Range: 1000m


Specifications
Wing span: 608mm
Length: 840mm
Flying Weight: 600g
Wing Load: 57g/dm2
Wing area: 8.7dm2
9 gram servos
Brushless motor and 25A ESC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£99.99




F-4E Phantom II 64mm 4CH RC EDF Fighter Jet - 2.4GHz
Model: ST-D04C


The F-4E Phantom II is a tandem two-seat, twin-engined, all-weather, long-range supersonic jet interceptor
fighter/fighter-bomber originally developed for the U.S. Navy. First entering service in 1960, the Phantom continued
to form a major part of U.S. military air power throughout the 1970s and 1980s, and even now are in active service
with a number of other countries. Despite the imposing dimensions and a maximum takeoff weight of over 27,000
the F-4E had a top speed of Mach 2.23 and an initial climb of over 41,000 ft/min. Shortly after its introduction, the
Phantom set 15 world records, including an absolute speed record of 1,606.342 mph and an absolute altitude
record of 98,557 ft.


The F-4 had several variants, but this model the F-4E was the one chosen by The Thunderbirds, who are the air
demonstration squadron of the U.S. Air Force.


Like all the planes in the Starmax range, the Phantom has lots of detail, a great factory finished look, with a clear
canopy with cockpit, the landing gear are easy to remove and replace, and the whole model has been designed for
easy fan access for maintenance. In the air, it's phenomenal, capable of around 70mph, which for something
less than 80cms long is very fast indeed. It is launchable by hand or will take off from the ground with ease. As you
can no doubt imagine, this package of power and size, makes for an extremely agile aeroplane; this fighter has an
amazing 3D aerobatic repertoire in experienced hands with a tremendous roll rate and an ability to climb vertically
at incredible speed. The videos show you just how capable the F-4E is!




                                                                                                         Page 167/219
                                                                                                         08/2011




This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


Features
Pre-painted foam fuselage & wings
Pre-installed electrics
CAD engineering quality
Stunning paintwork
64mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Is capable of the 'Cobra Manoeuvre'
Range: 1000m


Specifications
Wingspan: 542mm
Length: 788mm
Flying Weight: 540g
Wing area: 8dm2
Wing Load: 67g/dm2
Radio System: 4Ch Tx and 6 Ch Rx ,
Four 9 gram servos
64mm Ducted fan
Brushless motor and 25A ECS
Battery: 1300Mah, 11.1V


Required To Use
8 x AA Batteries
£159.99




F-5 64mm Tiger EDF RC Jet PNP Version
Model: ST-D18A-PNP


The real Northrop F-5E Tiger II are part of a family of widely used light supersonic fighter aircraft, designed and
built by Northrop in the United States, beginning in 1960s. Hundreds remain in service in air forces around the
world. The F-5E "Tiger II" was a greatly improved version of the earlier F-5A "Freedom
Fighter". Redesigned as a highly maneuverable, lightweight and inexpensive air superiority fighter, the E
featured an air-to-air fire control radar system and a lead computing gun sight. More powerful J85 engines required




                                                                                                         Page 168/219
                                                                                                             08/2011




the fuselage to be both widened and lengthened. The forward wing root was redesigned to give the "Tiger
II" wing its characteristic triple delta shape.


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


The unique scheme used on this model is a perfect replica of the special upgraded Brazilian F-5E shown below
which was designed to celebrate 30 years of service of the F-5E Tiger in the Brazilian Air Force.


532mm wingspan, 939mm long, 125 sq. in. wing area, 18-1/2 oz. flying weight. Tough EPO foam construction
makes a more durable airframe, less prone to dings and dents. The Jet comes with many of the major components
pre-installed and ready for final assembly. All you need to do to complete is glue in place the vertical fin, rockets
and the EPO nose cone. The 64mm fan is installed with a smooth-running out runner motor and a 30 amp speed
control. The 4 servos (2-aileron, 2-elevator) are pre-installed and pre-connected to the flying surfaces. Then you
need to add the receiver, battery and transmitter (not included) Flight battery access is located under the canopy,
making a quick change easy to do. The jet comes with removable landing gear with a turning nose wheel. It can be
flown with or without the gear. If you don't have a smooth runway, hand launching is easy to do and belly
landings are a breeze. The high visibility color scheme really helps with maintaining orientation with this fast jet.
Small-yes, twitchy-no; the F-5E has great speed and really grooves in the air. The jet is suitable for intermediate to
advanced pilots.


The Starmax jets are truly large scale, making them not only look amazing, and dramatic but it adds to the stability
of the model in the air. For true EDF jet enjoyment you'll find it hard to beat the Starmax.


Included is an electronic speed controller, ducted fan with electric brushless motor and 4 electric servos all
pre-installed. A 4ch transmitter which is required to complete the model gives full 3D control of the aileron, elevator,
rudder and throttle. The ducted fan system with the brushless motors gives enormous power pushing the jet to
crazy speeds. The high power allows full aerobatic characteristics and inside loops, outside loops, axial rolls,
inverted flight, knife edge, stall turns, hammerheads, and spins are all possible.


The attention to detail from Starmax who are the leading rc jet manufacturers gives the jet a nice realistic
appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at high
speeds then you can also fly the plane very slowly while you get used to it without any problems. The jet is made
from shock resistant EPS foam with reinforced fuselage and strong wings. Should you need any spare parts though
they are all available from our site. This plane is a lot of fun and you will certainly enjoy flying this fantastic model.


Features
64 mm EDF
Full aerobatic characteristics
Brushless setup
Ready to fly in just minutes
Super tough, lightweight airframe
Perfect appearance and emulation
Take off from ground or hand launched
Excellent flight performance




                                                                                                             Page 169/219
                                                                                                            08/2011




Stable inverted flight
Made by Starmax - industry leaders in quality
Slow speed flying capable


Specifications
Wingspan: 532mm
Length: 939mm
Flying Weight: 500g
Wing area: 7dm2
Wing Load: 70g/dm2
Servos: 5 x 9g servos
Fan: 64MM Ducted
Motor: Powerful 14L in-runner brushless
ESC: 25A ESC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£89.99




F-5E SWISS Tiger 64mm EDF 4CH RC Jet - 2.4GHz
Model: ST-D18A


The Northrop F-5A/B Freedom Fighter and F-5E/F Tiger II are part of a family of widely used, light supersonic
fighter aircraft, designed and built by Northrop in the United States, beginning in the 1960s. Hundreds remained in
service in air forces around the world, even into the early 21st Century, and the type has also been the basis for a
number of other aircraft.


This particular variant was used by the Patrouille Suisse, an aerobatic team of the Swiss Air Force founded in
1964. The team currently flies six Northrop F-5E Tiger II fighter/bomber jets.


Like all the planes in the Starmax range, the F-5E is finished in the factory to a high standard and represents an
excellent replica of the real aircraft. Extra features like the realistic landing gear, and the clear cockpit complete with
pilot add to the authenticity and realism present in this model.


However, not only does it look fantastic, but - as you'd expect from an aeroplane selected by an International
aerobatic team - it is an amazing 3D aerobatic aircraft, and capable of over 90mph. This package of power and
size, gives it a fantastic repertoire in experienced hands with a tremendous roll rate and an ability to climb vertically
at incredible speed. The videos show you just how capable the F-5E is! If you're really good you will be able to
perform the famous 'Cobra Manoeuvre' with this jet. It is launchable by hand or will take off from the
ground with ease.




                                                                                                            Page 170/219
                                                                                                        08/2011




This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
transmitter.


Features
Pre-painted foam fuselage & wings
90% assembled
Pre-installed electrics
CAD engineering quality
Stunning paintwork
Capable of over 90mph
64mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Is capable of the 'Cobra Manoeuvre'
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 532mm
Length: 939mm
Flying Weight: 500g
Wing area: 7dm²
Wing Load: 70g/dm²
Radio System: 4Ch Tx and 6 Ch Rx ,
Five 9 gram servos
64MM Ducted fan
Brushless motor and 25A ESC
Battery: 1300Mah, 11.1V.


Required To Use
8 x AA Batteries
£159.99




                                                                                                        Page 171/219
                                                                                                               08/2011




F/A-18E 64mm Jolly Roger RC Jet EDF PNP Version
Model: ST-D01B-PNP


The F/A-18 known as the Hornet is a supersonic, all-weather, carrier-capable, multirole fighter jet, designed to
attack both ground and aerial targets. Introduced in the early 80s and capable of Mach 1.8 (1,190mph) at 40,000
feet, it is still in active service around the world in roles such as fighter escort, fleet air defense, suppression of
enemy air defenses (SEAD), air interdiction, close air support and aerial reconnaissance. The F/A-18E has been a
popular choice of fighter for aircraft carrier deployment. Strike Fighter Squadron 103 (VF-103), nicknamed the Jolly
Rogers is an aviation unit of the United States Navy established in 1952. They fly the Hornet emblazoned with a
sinister skull and cross bones on the tailfins, and it is these planes that have been reproduced in the model you see
here.


This scale model of the real thing has been beautifully crafted using CAD technology and, this is evident in the
realsitic and high quality finish seen in this plane. All parts are pre-painted to a high level of detail, the jet really
does look fantastic, and as an added bonus it's 95% built , with only a few stages of assembly to complete
before you can take to the air.


This is a large scale model, 980mm long and with a 648mm wingspan, it looks awesome, dominates the sky and
also improves the flying experience.


This plane is incredibly stable and has just the right amount of power; only a couple of flicks of the throttle are
needed to get this jet taxiing and ready for take off. The Jolly Rogers model accelerates like a rocket and takes to
the air with ease, and once in the air, that's when the fun begins! The F/A 18E can perform pretty much any
aerial acrobatic manoeuvre you could possibly ask of it, but due to its stability it is a suitable choice of aeroplane for
someone wishing to learn the thrills of model jets.


The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


Features
Pre-painted foam fuselage & wings
Some Pre-installed electrics
CAD engineering quality
Stunning paintwork
64mm electric ducted fan
State of the art components
Can perform amazing aerobatics
Is capable of the 'Cobra Manoeuvre'


Specifications
Wing span: 686mm
Length: 980mm




                                                                                                               Page 172/219
                                                                                                               08/2011




Flying weight: 560g
Wing area: 10dm²
Wing Load: 56g/dm²
Five 9 gram servos
Brushless Powered: Powerful 15L inner runner brushless motor and 25A ESC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries


 
£99.99




F/A-18E 64mm Tiger PNP Version EDF RC Jet
Model: ST-D01E-PNP


The F/A-18 known as the Hornet is a supersonic, all-weather, carrier-capable, multirole fighter jet, designed to
attack both ground and aerial targets. Introduced in the early 80s and capable of Mach 1.8 (1,190mph) at 40,000
feet, it is still in active service around the world in roles such as fighter escort, fleet air defence, suppression of
enemy air defenses (SEAD), air interdiction, close air support and aerial reconnaissance. The F/A-18E has been a
popular choice of fighter for aircraft carrier deployment.


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


This is a large scale model and with its brightly coloured design and size together looks amazing, this really has to
be seen to be believed. It is nearly a metre long and has a 686mm wingspan. Not only does this large scale make
the model look good, but it means it's more stable in flight too, even in windy conditions. These Starmax jets
will not disappoint.


This scale model of the real thing has been beautifully crafted using CAD technology and, this is evident in the
realsitic and high quality finish seen in this plane. All parts are pre-painted to a high level of detail, the jet really
does look fantastic, and as an added bonus it's 95% complete straight out of the box, with only a few stages
of assembly to complete before you can take to the air. All you need in addition to what's in the box is a
transmitter, receiver, battery and charger - all of which are options on this page.


The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


Features
Pre-painted foam fuselage & wings




                                                                                                               Page 173/219
                                                                                                               08/2011




Pre-installed electrics
CAD engineering quality
Stunning paintwork
64mm electric ducted fan
State of the art components


Specifications
Wing span: 686mm
Length: 980mm
Flying weight: 560g
Wing area: 10dm²
Wing Load: 56g/dm²
Five9 gram servos
Brushless Powered: Powerful 15L inner runner brushless motor and 25A ESC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£99.99




F16 64mm RC Jet Vectored PNP Version in Black and Grey
Model: ST-D29A-PNP


The General Dynamics F-16 Fighting Falcon is a multirole jet fighter aircraft originally developed by General
Dynamics for the United States Air Force. Designed as a lightweight, daytime fighter, it evolved into a successful
multirole aircraft. Over 4,400 aircraft have been built since production was approved in 1976.


The Fighting Falcon is a dogfighter with numerous innovations including a frameless bubble canopy for better
visibility, side-mounted control stick to ease control while maneuvering, a seat reclined 30 degrees to reduce the
effect of g-forces on the pilot, and the first use of a relaxed static stability/fly-by-wire flight control system that
makes it a highly nimble aircraft. The F-16 has an internal M61 Vulcan cannon and has 11 hardpoints for mounting
weapons, and other mission equipment. Although the F-16's official name is "Fighting Falcon", it is
known to its pilots as the "Viper", due to it resembling a viper snake and after the Battlestar Galactica
Colonial Viper starfighter.


This fighter is one of the classics, the F-16 is the one that springs to mind when people think of fighter jets.


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


The Starmax jets are truly large scale, making them not only look amazing, and dramatic but it adds to the stability




                                                                                                               Page 174/219
                                                                                                             08/2011




of the model in the air. For true EDF jet enjoyment you'll find it hard to beat the Starmax.


This one has an 800mm wingspan and a very powerful brushless motor - if you couple this with the 14.8V battery
and charger that you'll need to finish the plane (along with a transmitter, and receiver) you are going to be in
posession of an extremely rapid model!


The speed of the F16 really has to be seen to be believed, they can be launched from the ground or hand held and
as soon as you hit that throttle lever on the transmitter of your choice, this jet will rocket all the way to 80-90mph
depending on flight conditions.


The F-16 also has a feature called thrust vectoring. Thrust vectoring is the ability of an aircraft to direct the thrust
from its engine(s) in a direction other than parallel to the vehicle's longitudinal axis. The technique was
originally employed to provide upward vertical thrust as a means to give aircraft vertical (VTOL) or short (STOL)
takeoff and landing ability. Soon, it was realized that using vectored thrust in combat situations enabled aircraft to
perform manoeuvres not available to conventional-engined planes. One of the RC channels on this jet allows you to
change the direction in which the EDF fan pushes the thrust, meaning that this is one of the most agile EDF jets
that money can buy.


Included is an electronic speed controller, ducted fan with electric brushless motor and 7 electric servos all
pre-installed. A 4ch transmitter which is required to complete the model gives full 3D control of the aileron, elevator,
rudder, throttle, and the vectored thrust. The ducted fan system with the brushless motors gives enormous power
pushing the jet to crazy speeds.


The attention to detail from Starmax who are the leading rc jet manufacturers gives the jet a nice realistic
appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at high
speeds then you can also fly the plane very slowly while you get used to it without any problems. The jet is made
from shock resistant EPS foam with reinforced fuselage and strong wings. Should you need any spare parts though
they are all available from our site. This plane is a lot of fun and you will certainly enjoy flying this fantastic model.


The power that this plane packs allows it to perform a full aerobatic display: inside loops, outside loops, axial rolls,
inverted flight, knife edge, stall turns, hammerheads, and spins are all possible. If you're really good you will
be able to perform the famous 'Cobra Manoeuvre' with your AMX.


Features
Pre-painted foam fuselage & wings
Thrust vectoring
90% assembled
Some Pre-installed electrics
CAD engineering quality
Stunning paintwork
64 mm electric ducted fan
State of the art components
Can perform amazing aerobatics


Specifications
Wingspan: 800mm




                                                                                                             Page 175/219
                                                                                                             08/2011




Length: 1020mm
Wing Load: 35 g/dm²
Fly Weight: 1100g
7 pcs 9g servos
Brushless motor 2632 out runner KV4100
45A ESC 5A UBEC


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£99.99




F9F Panther 64mm 4CH RC EDF Fighter Jet - 2.4GHz
Model: ST-D10A


The Grumman F9F Panther was one of the U.S. Navy's first successful carrier-based jet fighters. Introduced
in 1958 the Panther was the most widely used US Navy jet fighter of the Korean War, flying 78,000 sorties and
scoring the first air-to-air kill by the US Navy in the war, the downing of a North Korean Yakovlev Yak-9 fighter.


Capable of 575mph and with a range of 1,300 miles, this jet had quite a thirst for fuel. As there was insufficient
space within the wings and fuselage for the amount of fuel required, permanently-mounted wingtip fuel tanks were
added which had the side benefit of improving the fighter's rate of roll! The jet was retired by the US in the late
fifties to early sixties, but was still in service with the Argentinian Navy (the only foreign buyer of the Panther) until
1969.


Like all the planes in the Starmax range, the Panther is finished in the factory to a high standard and represents an
excellent replica of the real aircraft. Extra features like the realistic landing gear, and the clear cockpit complete with
pilot add to the authenticity and realism present in this model.


But! Looks are only half of the story with these models. In the air, it is an incredible acrobat, and capable of over
90mph. It is launchable by hand or will take off from the ground with ease. As you can no doubt imagine, this
package of power and size, makes for an extremely agile aeroplane; this fighter has an amazing 3D aerobatic
repertoire in experienced hands with a tremendous roll rate and an ability to climb vertically at incredible speed.
The videos show you just how capable the F9F is! If you're really good you will be able to perform the famous
'Cobra Manoeuvre' with this jet.


This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also




                                                                                                             Page 176/219
                                                                                                           08/2011




everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
transmitter.


Features
Pre-painted foam fuselage & wings
90% assembled
Pre-installed electrics
CAD engineering quality
Stunning paintwork
Capable of over 90mph
64mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Is capable of the 'Cobra Manoeuvre'
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 770mm
Length: 793mm
Flying Weight: 520gv Radio System: 4Ch Tx and 6 Ch Rx ,
Four 9 gram servos
64mm Ducted fan
Brushless motor and 25A ESC
Battery: 1300Mah, 11.1V


Required To Use
8 x AA Batteries
£149.99




He 162 Salamander 64mm RC EDF Fighter Jet - 2.4GHz
Model: ST-D05A


Heinkel's He 162 Volksjäger ("People's Fighter") was a German single-engine,
jet-powered fighter aircraft used by the Luftwaffe in WWII. The original 162 was constructed mainly from wood as
metals were in short supply and prioritised for other aircraft. Despite this the He 162 was the fastest of the first
generation of Axis and Allied jets. Volksjäger was the Reich Air Ministry's official name for the He 162.
Other names given to the plane include Salamander, which was the codename of its construction program. It took
less than 90 days from the final design being chosen to a finished aircraft actually flying!,/p>


The He 162 is a clean, sporty-looking little aircraft, with a sleek, streamlined fuselage. The BMW jet engine was




                                                                                                           Page 177/219
                                                                                                               08/2011




mounted in a pod situated on top of the fuselage directly aft of the cockpit. Twin vertical tailfins were mounted at the
ends of the upswept tailplanes to clear the jet exhaust, a high-mounted straight wing with a forward-swept trailing
edge and shallow dihedral, an ejection seat was provided for the pilot (deemed far more valuable than the machine
itself), and tricycle landing gear that retracted into the fuselage.


This scale model of the He 162 has been carefully designed using CAD technology and, is a faithful replica of the
World War II original. All parts are pre-painted to a high level of detail, the aeroplane looks amazing! As an added
bonus it's 95% complete straight out of the box, with only a few stages of assembly to complete before you
can take to the air. This plane is a stable model and has a well chosen, powerful motor for its size; you only need to
give it a little touch of throttle and this warbird will be off, skywards. It will take off either from the ground or can be
launched from the hand, and when it is launched, the fighter takes to the air with ease, and looks extremely realistic
in the air.The He 162 can perform a whole host of aerobatics in skilled hands, but due to its stability it is a suitable
choice of aeroplane for someone wishing to learn the thrills of model jets.


This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


The He-162 comes with a sheet of Luftwaffe decals so that you can decorate your model as you wish.


Features
Pre-painted foam fuselage & wings
Pre-installed electrics
CAD engineering quality
Stunning paintwork
64mm electric ducted fans
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Range: 1000m


Specifications
Wing span: 790mm
Length: 988mm
Flying Weight: 600g
Wing Load: 47g/dm²
Wing area: 12.8dm²
Radio System: 4Ch Tx and 6 Ch Rx
Four 9 gram servos Brushless motor
25A ESC
Battery: 3 Cell Li-Po ,1300 mAh,11.1V


Required To Use
8 x AA Batteries
£139.99




                                                                                                              Page 178/219
                                                                                                                                08/2011




RC Jets -/- 70mm EDF Fan Jets




                   F-117 Blacknight Stealth 70mm EDF RC Jet PNP Version
                   Model: ST-D21A-PNP


                   The Lockheed F-117 Nighthawk is a stealth ground attack aircraft formerly operated by the United States Air
                   Force. The F-117A's first flight was in 1981, and it achieved initial operating capability status in October 1983.
                   The F-117 was a 'black' project, an ultra-secret program for much of its life, until the late 1980s.


                   The F-117 is shaped to deflect radar signals and is about the size of an F-15 Eagle. The single-seat Nighthawk is
                   powered by two non-afterburning General Electric F404 turbofan engines, and has quadruple-redundant fly-by-wire
                   flight controls. It shares many components with the F-16 Fighting Falcon, F/A-18 Hornet and F-15E Strike Eagle.


                   What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost
                   Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
                   installed but is missing the receiver, transmitter, batteries and charger.


                   Among the penalties for stealth are lower engine power thrust, due to losses in the inlet and outlet, a very low wing
                   aspect ratio, and a high sweep angle (50°) needed to deflect incoming radar waves to the sides. With these
                   design considerations and no afterburner, the F-117 is limited to subsonic speeds.


                   Starmax have worked their usual wonders in the finish and design of this foam structured plane. The fuselage is
                   both strong and extremely light, designed to withstand the occasional crash landing. It is complete with a detailed
                   paint job, and factory affixed decals to complete the realistic look of your F-117 Stealth fighter.


                   However, not only does it look fantastic, it is an amazing aerobatic aircraft, and capable of incredible speed. This
                   model of this infamous jet fighter has got a 70mm ducted fan and automatic landing gear.The power that this plane
                   packs allows it to perform a full aerobatic display: inside loops, outside loops, axial rolls, inverted flight, knife edge,
                   stall turns, hammerheads, and spins are all possible. If you're really good you will be able to perform the
                   famous 'Cobra Manoeuvre' with this Nighthawk. The videos show you just how capable it is!


                   This jet is also equipped with a powerful brushless motor, for the best performance. The plane is made from strong
                   but lightweight foam that is more resistant to crashes and gives easier stable flight even in windy conditions. This
                   aeroplane can take off from the ground or can be hand launched.


                   This plane is 90% assembled and so only a few minutes of final finishes are needed, and a few additional
                   components before you can fly. Also most of what you need is in the box, apart from 8 AA batteries, transmitter,
                   receiver, Li-po battery and charger.


                   Features
                   Pre-painted foam fuselage & wings
                   90% assembled




                                                                                                                                Page 179/219
                                                                                                         08/2011




Some Pre-installed electrics
CAD engineering quality
Automatic landing gear
Stunning paintwork
70mm electric ducted fan
State of the art components
Can perform amazing aerobatics


Specifications
Wingspan: 734mm
Length: 1100mm
Flying Weight: 980g
70mm Ducted fan
Motor: 2836 outer runner brushless motor
ESC: 45A ESC 5A UBEC
Seven 9g servos, one 17g servo
Automatic landing gear system
Steering front landing gear


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£109.99




F-15 Desert Vectored Thrust 70mm 5CH EDF Jet Plane
Model: ST-D19D


The McDonnell Douglas (now Boeing) F-15 Eagle is a twin-engine, all-weather tactical fighter designed to gain and
maintain air superiority in aerial combat. It is considered among the most successful modern fighters with over 100
aerial combat victories. The Eagle first flew in July 1972, and entered service in 1976. The F-15 is expected to be in
service with the U.S. Air Force until 2025.


Since the 1970s, the Eagle has also been exported to Israel, Japan, and Saudi Arabia. Despite originally being
envisaged as a pure air superiority aircraft, the design proved flexible enough that an all-weather strike derivative,
the F-15E Strike Eagle, was later developed, and entered service in 1989.


This Starmax replica of the F-15 is a top-level model aeroplane, featuring vectored thrust, retractable landing gear
and the craftsmanship and factory finish that people come to expect from our models.The finish and design of this
foam structured plane has been undertaken to a very high standard. The fuselage is both strong and extremely
light, designed to withstand the occasional crash landing. It is complete with a detailed paint job, and factory affixed
decals to complete the realistic look of your F-15.




                                                                                                         Page 180/219
                                                                                                               08/2011




Thrust vectoring is the ability of an aircraft to direct the thrust from its engine(s) in a direction other than parallel to
the vehicle's longitudinal axis. The technique was originally employed to provide upward vertical thrust as a
means to give aircraft vertical (VTOL) or short (STOL) takeoff and landing ability. Soon, it was realized that using
vectored thrust in combat situations enabled aircraft to perform manoeuvres not available to conventional-engined
planes.


So, what does all this mean? Well, you've got a 70mm ducted fan with powerful 14.8v battery, 5ch
electronics, and automatic landing gear. Coupled with the vectored thrust, this gives you one of the fastest and
most agile model aeroplanes on the market for this price. You will not be disappointed!


**Some of the pictures of this model show the red version, we are shipping the desert camo paintjob shown in the
top picture - more pictures of the desert colours will be posted as soon as we have taken them**


This is an amazing 3D aerobatic aircraft, and capable of incredible speed. The punch that this plane packs allows it
to perform a full aerobatic display: inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns,
hammerheads, and spins are all possible. If you're really good you will be able to perform the famous
'Cobra Manoeuvre' with this F-15.


This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
transmitter


Features
Pre-painted foam fuselage & wings
90% assembled
Pre-installed electrics
CAD engineering quality
Vectored thrust
Automatic landing gear
Stunning paintwork
70mm electric ducted fan
State of the art components
2.4G Transmitter
Can perform amazing aerobatics
Powerful batteries
Approx 15min flight time
Range: 1000m


Specifications
Wingspan: 750mm
Length: 1100mm




                                                                                                              Page 181/219
                                                                                                           08/2011




Flying Weight: 950g
Radio: 2.4G 5Ch Tx and 6 Ch Rx
70mm Ducted fan
Motor: Powerful 2836 outer runner brushless motor
ESC: 45A ESC 5A UBEC
9 x 9g servos
17g servo, with vectored feature
Automatic landing gear system
Steering front landing gear
Battery: 4 Cell Li-Po, 2200mAh,14.8V
Charger: 4S Charger


Required To Use
8 x AA Batteries
£249.99




F-5E Camo 70mm 5CH EDF Jet With Retracts - 2.4GHz
Model: ST-D03A


The real Northrop F-5E Tiger II are part of a family of widely used light supersonic fighter aircraft, designed and
built by Northrop in the United States, beginning in 1960s. Hundreds remain in service in air forces around the
world. The F-5E "Tiger II" was a greatly improved version of the earlier F-5A "Freedom
Fighter". Redesigned as a highly maneuverable, lightweight and inexpensive air superiority fighter, the E
featured an air-to-air fire control radar system and a lead computing gun sight. More powerful J85 engines required
the fuselage to be both widened and lengthened. The forward wing root was redesigned to give the "Tiger
II" wing its characteristic triple delta shape. This excellent model is based on the US Navy desert camo finish.


This F-5E is one of the highest spec and quickest jets on the market. It is a massive 1.3m in length and is fitted
with a 70mm EDF. Extra power and speed is produced by the big 14.8V, 2200mah LiPo battery and 40A brushless
setup. As well as extra power and speed this jet also features an automatic landing gear system and turning front
wheel. To allow this the set includes a 5ch transmitter and eight servos. It's a highly maneuverable model that
can easily perform inverted flight, loops and rolls etc.The model comes pre-painted with everything you need
included apart from the normal AA batteries for the transmitter. The model is almost ready to fly out of the box with
only very minor assembly required such as attaching the wings. Everything you need to complete is included in the
box.


Included is a 5ch 1000m range transmitter, electronic speed controller, ducted fan with electric brushless motor
and 8 electric servos all pre-installed. The 5ch transmitter gives full 3D control of the aileron, elevator, rudder,
throttle and retracts. The 70mm ducted fan system with the brushless motors and li-po battery gives enormous
power pushing the jet to crazy speeds. The high power allows full aerobatic characteristics and inside loops,
outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are all possible.




                                                                                                           Page 182/219
                                                                                                             08/2011




The attention to detail from Starmax who are the leading rc jet manufacturers gives the jet a nice realistic
appearance. The jet can take off from the ground or can be hand launched. If you are not ready to be flying at high
speeds then you can also fly the plane very slowly while you get used to it without any problems. The jet is made
from shock resistant EPS foam with reinforced fuselage and strong wings. Should you need any spare parts though
they are all available from our site. This plane is a lot of fun and you will certainly enjoy flying this fantastic model.


Features
70mm EDF
Upgraded 14.8V battery
Working retracts
5 Channel Digital Proportional
Full aerobatic characteristics
Brushless setup
Ready to fly in just minutes
Super tough, lightweight airframe
Perfect appearance and emulation
Take off from ground or hand launched
Excellent flight performance
Stable inverted flight
Made by Starmax - industry leaders in quality
Slow speed flying capable
Apr. 15 min's flight time per charge


Specifications
Wingspan: 760mm
Length: 1312mm
Flying Weight: 900g
Wing area: 12.44dm2
Wing Load: 72.3g/dm2
Radio System: 5Ch Tx and 6Ch Rx
Servos: 8 x 9 gram servos
Fan: 70mm Ducted fan
Motor: Powerful 2836 out runner brushless
ESC: 40A ESC 5A UBEC
Battery: 2200Mah, 14.8V
Radio Control Range: 3000 feet (1000m)


Required To Use
8 x AA Batteries
£239.99




                                                                                                             Page 183/219
                                                                                                                                 08/2011




RC Jets -/- Twin Fan Jets




                     A-10 Warthog 64mm 5CH EDF Twin Rc Jet - 2.4GHz
                     Model: ST-D14C


                     The A-10 Thunderbolt II (also known as the Warthog) is an American single-seat, twin-engine, straight-wing jet
                     aircraft designed to provide close air support of ground forces. It was the first USAF aircraft designed exclusively for
                     close air support. The A-10 has superb manoeuverability even at low speeds and altitude, this is due to its large
                     wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing
                     it to operate from the smallest and most basic airfields.


                     Like all the planes in the Starmax range, the A-10 is finished in the factory to a high standard and represents an
                     excellent replica of the real aircraft. Extra features like the realistic landing gear add to the authenticity and realism
                     present in this model. This model features twin 64mm EDF jets, twin ESCs and a massive 2500mAh battery. It also
                     has 5 channels which allows an electric landing gear retracting mechanism.


                     This jet comes with a 2.4G radio which means the range is longer and more stable plus you do not have to worry
                     about interference from other fliers. It is also equipped with a powerful brushless motor, for the best performance.
                     The plane is made from strong but lightweight foam that is more resistant to crashes and gives easier stable flight
                     even in windy conditions. This aeroplane can take off from the ground or can be hand launched.


                     This plane is 90% assembled and so only a few minutes of final finishes are needed before you can fly. Also
                     everything you need is in the box, apart from 8 AA batteries, which you'll need to power the radio contol
                     transmitter.


                     Features
                     Pre-painted foam fuselage & wings
                     90% assembled
                     Pre-installed electrics
                     CAD engineering quality
                     Retractable landing gear
                     Stunning paintwork
                     Twin 64mm electric ducted fans
                     State of the art components2.4G Transmitter
                     Can perform amazing aerobatics
                     Powerful batteries
                     Approx 15min flight time
                     Range: 1000m


                     Specifications
                     Wingspan: 1030mm
                     Length: 949mm




                                                                                                                                 Page 184/219
                                                                                                           08/2011




Twin 64mm EDF, twin ESC, twin Motor
Radio System: 5Ch Tx and 6 Ch Rx
8 servos
Brushless motor and 25A ESC
Suspension electric retract system
Battery: 2500 mAh,11.1V


Required To Use
8 x AA Batteries
£239.99




F14 twin 70mm Jolly Roger Top Gun EDF RC Jet PNP Version
Model: ST-D08A-PNP


The Grumman F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep winged aircraft. It was the
United States Navy's primary maritime air superiority fighter, fleet defence interceptor and tactical
reconnaissance platform from 1974 to 2006. In 1986, the F-14 was the main aircraft featured in the Tom Cruise film
Top Gun, spawning a surge in U.S. Navy recruiting. The F-14 Tomcat was designed as both an air superiority
fighter and a long-range naval interceptor, it has a two seat cockpit with a canopy that gives all-round visibility.


The Tomcat's defining feature is its variable geometry wings that swing automatically during flight; for
high-speed intercept, they are swept back, and they then swing forward again for lower speed flight. It has a
maximum speed of Mach 2.34 (1,544 mph) at high altitude, and has a service ceiling of 50,000 ft.


This incredible jet aircraft is equipped with an internal 20 mm M61 Vulcan Gatling-type gun mounted on the left
side, and can carry AIM-54 Phoenix, AIM-7 Sparrow, and AIM-9 Sidewinder anti-aircraft missiles.


Now for the details on the F-14 Jolly Rogers which you can fly! Like all the planes in the Starmax range, the F-14 is
finished in the factory to a high standard and represents an excellent replica of the real aircraft. But this one is
special, not only does it look like the real McCoy but it shares most of the functionality of the real thing too. The
variable geometry or swing-wings on this model jet actually work, as does the landing gear, thanks to its 6 channel
electronics. You can control each position of the wings from fully open to fully retracted. How good does this jet look
with the wings fully retracted?!


The F-14 Jolly Rogers is an extremely high spec model; it features twin 70mm EDF jets, and twin ESCs, making it
very quick.


The Starmax F-14 is a massive model, it has an 1100mm wingspan, so not only does it look fantastic, and will
dominate the sky above you, this large size makes it much more stable in flight. If you want the ultimate ducted fan
jet, then this is the one for you. It is stunning, manouvreable and exceedingly fast. You will be Top Gun!


What does PNP mean? PNP stands for plug and play, and describes a model that is somewhere between Almost




                                                                                                           Page 185/219
                                                                                                             08/2011




Ready to Fly (ARF) and Ready to Fly (RTF). A PNP model has the motor, ESC, servos and some radio gear
installed but is missing the receiver, transmitter, batteries and charger.


This model is an amazing 3D aerobatic aircraft, and capable of incredible speed. The twin engined punch that this
plane packs allows it to perform a full aerobatic display: inside loops, outside loops, axial rolls, inverted flight, knife
edge, stall turns, hammerheads, and spins are all possible. If you're really good you will be able to perform the
famous 'Cobra Manoeuvre' with this Tomcat.*


This jet is equipped with a powerful brushless motor, for the best performance. The plane is made from strong but
lightweight foam that is more resistant to crashes and gives easier stable flight even in windy conditions. This
aeroplane can take off from the ground or can be hand launched.


This plane is 90% assembled and so only a few minutes of final build finishes are needed, and a few components
before you can fly.


Features
Pre-painted foam fuselage & wings
90% assembled
Some Pre-installed electrics
CAD engineering quality
Working swing wings
Retractable landing gear
Stunning paintwork
Twin 70mm electric ducted fans
State of the art components
Can perform amazing aerobatics


Specifications
Wingspan: 1100mm
Length: 1086mm
Flying Weight: 1100-1300g
Twin 70mm ducted fan
Twin motor: Powerful 2430 outer runner brushless motor
Twin ESC: 45A ESC 5A UBEC
With variable sweep wing, retract system


Required To Use
Transmitter, receiver, battery and charger
8 x AA Batteries
£249.99




                                                                                                             Page 186/219
                                                                                                                         08/2011




RC Motorbikes




                1:16 Scale Racing RC Motorbike
                Model: MRM-3657-NM


                This rc motorbike is designed to appear and feel like the hi powered Moto GP race motorbikes and it doesn't
                disappoint in appearence or in handling! Our electric radio controlled motorbike is ideal for beginners and those
                with more experience, who'll be able to pull wheelies and powerslide round the bends. This 1:16 scale rc
                bikes model has a well-balanced and low centre of gravity, and is also equipped with slide bars to help the beginner
                keep it upright. This bike comes in two different versions and this is the top of the range version with the upgraded
                Ni-Mh battery giving more power and longer run time.


                You are able to take this rc motorbike along the street travelling slowly or at high speed, you can also race it
                around the local track and use all your skill to get this cool rc bike around as fast as possible. Can you get your
                knee down?!


                Features:
                Accurate 1:16 scale motorcycle
                Full RC controls: left, right, accelerate, brake
                Rechargeable battery and charger
                Capable of up to 10mph


                Specifications:
                Frequency:27mhz, 40mhz
                Speed: 15Km/h - 10mph
                Product Size: 32 x 13.5 x 24cm
                Battery:7.2V800mA rechargeable battery(included)
                Battery for Transmitter: 9V battery(included)
                Charge Time:5-6 hours
                Run Time:about 20 Minutes.


                Required To Use
                Everything is included
                £29.99




                                                                                                                         Page 187/219
                                                                                                               08/2011




RC Car Upgrade Parts




                   Balance Li-po Battery Charger 7.4, 11.1v
                   Model: AB1066
                   Balance Li-po Battery Charger 7.4, 11.1v with UK 3-pin plug
                   £14.99




                   Blue Bird - High-torque Steering Servo
                   Model: GSC-900189


                   "Blue Bird" BMS-616MG+HS High-torque Servo, w/Ball Bearing & Metal Gear, 7.6kg-cm
                   (110oz-in) @4.8V/8.4kg-cm (117oz-in) @6.0V
                   £19.99




                   Common Spare Parts Pack (Plastic)
                   Model: 3010PARTS


                   Common Spare Parts Pack (Plastic)
                   £24.99




                                                                                                               Page 188/219
                                                                                                            08/2011




Common Spares Parts Pack (Plastic) 3003
Model: 3003PARTS


Common Spares Parts Pack (Plastic) 3003
£29.99




Complete Hex/Screwdriver Set 6pcs - High Quality Tool Set
Model: H80216


1 x slot:end size 5.8mm, 1 x phillips:end size 5.8mm, 4 x hex: end size 1.5, 2., 2.5, 3.
£24.99




Failsafe
Model: S30124


Designed to return the throttle servo to a preset position in the event that radio signal is lost or the receiver battery
voltage falls below a factory preset voltage (4v). It is recommended that full brakes be programmed as the failsafe
position
£12.99




Female T-Connector
Model: 33060


Converts Battery connectors - Deans Male into a Male Tamiya style connector
£3.99




                                                                                                           Page 189/219
                                                                                            08/2011




Genese 2200KV Brushless Motor + 120A HV ESC + Set-up Board
Model: GSC-ESC001


Powerful Genese 2200KV Brushless Motor + 120A HV ESC + Set-up Board, for pro 1/8 Scale Models
£159.99




GP Rechargeable Batteries and Charger For Radio Equipment (A)
Model: 0BATTPACKA


1 x GP AA battery charger
8 x Rechargeable GP AA 1300mAh batteries
£19.99




GP Rechargeable Batteries and Charger For Radio Equipment (B)
Model: 0BATTPACKB


1 x GP AA battery charger
12 x Rechargeable GP AA 1300mAh batteries
£19.99




GP Rechargeable Batteries and Charger For Radio Equipment (C)
Model: 0BATTPACKC


1 x GP AA/AAA battery charger
8 x Rechargeable GP AA 1300mAh batteries
4 x Rechargeable GP AAA 1000mAh batteries
 
£24.99




                                                                                            Page 190/219
                                                                                   08/2011




GS CL-1 to AD+ World Conversion Upgrade Kit
Model: GSC3004-C


Upgrade your GS CL-1 nitro buggy to the AD+ World spec. Includes:




New lightweight 7075 T6 Aluminium CNC milled hard anodized Teflon coated chassis


4mm longer wheel base


New central differentail & engine position for better centre of gravity


New geometry lightweight front & rear shock towers


New lightweight front & rear crown gears for better acceleration


New Carbon fiber radio tray with improved centre of gravity design


New front & rear lightweight CVD set


Adjustable front wheelbase/weight balance


New low profile receiver box with aluminium battery heat sink


New high down force wing


Dust-free wheel nuts with o-rings


New lightweight 7075 aluminium chassis braces
£119.99




GS Racing CLX Front Pivot Ball System Conversion Kit
Model: GSC8001P


Gs Racing CLX Front Pivot Ball System Conversion Kit
£59.99




                                                                                   Page 191/219
                                                                             08/2011




GS XUT to XUT AD World Conversion Upgrade Kit
Model: GSC3051-C


Upgrade your GS XUT nitro truggy to the AD World spec. Includes:




Front and rear 13mm long stroke shocks


Aluminium Wing joint set


Lightened Front/Rear Diff Outdrives


Full CVD Drive Shafts


Front & rear aluminium chassis braces


Low profile radio tray
£89.99




HSP 2.4ghz TX and RX
Model: H800024


HSP 2.4ghz TX and RX
£34.99




LiPo Battery (7.4V 1600mAh) Upgrade For Air Racer
Model: H18247


LiPo Battery (7.4V 1600mAh) Upgrade For Air Racer (Requires Li-Po Charger)
£19.99




                                                                             Page 192/219
                                                                                                        08/2011




Model Technics ZZIP 25% 2.27 Litres Nitro Model Fuel
Model: 25-2.27L




Zzip contains 6%/7% Lowvisc oil 2% Reg Techniplate and 2% castor oil. This is American Concept fuel for cars,
truks and bugs. Zzip has all the advantages of castor oil plus the high power and quick pick-up of a low viscosity
lubricant. But there is a downside to using Zzip --- if you don’t win a race, you can’t blame the fuel!




 
£13.99




Nitro Glow Starter Set
Model: B1016


Nitro Glow Starter Set - The glowstarter is the tool needed to allow you to start your engine.


The glow starter is used to heat the glow plug of a nitro engine to a high enough temperature to ignite the fuel in
the engine cylinder. The glow starter can be removed after the engine is running.


 


 
£14.99




                                                                                                        Page 193/219
                                                                                                           08/2011




Option LED Light Kit For High Speed Air Racer
Model: H23318


Option LED Light Kit For High Speed Air Racer
£12.99




Optional Electric Starter - This replaces the manual pullstart
Model: 0HPA-0004


Optional Electric Starter - This replaces the manual pullstart that comes fitted on your model. The drill start will only
fit engines that have a 12mm one way bearing
£24.99




Spare 11.1V 1800mAh Li-Po Battery
Model: 3B1086


Spare 11.1V 1800mAh Li-Po Battery for 1:10 Acme
£34.99




Spare 11.1V Li-Po Battery for Werewolf
Model: 3B1091


Spare 11.1V Li-Po Battery for Werewolf
£44.99




                                                                                                          Page 194/219
                                                           08/2011




Spare 3 Cell Li-Po Battery (11.1v/1300mah)
Model: 3B1057


Spare 3 Cell Li-Po Battery (11.1v/1300mah) for 1:16 Acme
£24.99




Spare 7.2V 3000mAh Battery with Tamiya Style Connector
Model: FS511110


Spare 3000mAh 7.2V Battery with Tamiya Style Connector
£29.99




Spare Battery Pack
Model: ZBATTERY


Shengqi Spare Battery Pack
£24.99




Spare Li Po Battery 11.1v 2200mah For Trooper
Model: 3B1110


Spare Li Po Battery 11.1v 2200mah For Trooper
£44.99




                                                           Page 195/219
                                                          08/2011




Spare Standard Battery Pack (7.2v 1800ma)
Model: H03014


Spare Standard Battery Pack (7.2v 1800ma)
£14.99




Spare Team Infinity Glow Plug
Model: 0EG0002


Spare Team Infinity Glow Plug


 
£4.99




Starter Box
Model: S401432


Starter Box
£29.99




Upgrade Parts Pack
Model: 3010UPGRADES


All the basic upgrades you would want in one pack.
£49.99




                                                          Page 196/219
                                                                  08/2011




Zzip Nitro Fuel 15% - World Class Model Fuel and made in the UK
Model: 162.27LTR


UK Mainland delivery only.
£12.99




                                                                  Page 197/219
                                                                                                                 08/2011




RC Helicopter Parts




                      Complete Hex/Screwdriver Set 6pcs - High Quality Tool Set
                      Model: H80216


                      1 x slot:end size 5.8mm, 1 x phillips:end size 5.8mm, 4 x hex: end size 1.5, 2., 2.5, 3.
                      £24.99




                      GP Rechargeable Batteries and Charger For Radio Equipment (A)
                      Model: 0BATTPACKA


                      1 x GP AA battery charger
                      8 x Rechargeable GP AA 1300mAh batteries
                      £19.99




                      Spare 7.4V Li-Poly Battery
                      Model: 8EK1-0181


                      Spare 7.4V Li-Poly Battery for RC Helicopters.
                      £19.99




                                                                                                                 Page 198/219
                                                   08/2011




Spare ABS Main Blade For Ninja 400
Model: KNI-59


Spare ABS Main Blade For Ninja 400
£8.99




Spare ABS main rotor blade For Wasp V3
Model: KWH3-044
Spare ABS main rotor blade For Wasp V3
£9.99




Spare ABS main rotor blade For Wasp V4
Model: KWH4-042


Spare ABS main rotor blade For Wasp V4
£8.99




Spare Battery For Ninja 400 -11.1V 1100MAH LI-PO
Model: KLP001
Spare Battery For Ninja 400 -11.1V 1100MAH LI-PO
£14.99




                                                   Page 199/219
                                                 08/2011




Spare Battery For Wasp V3 - 7.4V 900MAH LI-PO
Model: KLP007


Spare Battery For Wasp V3 - 7.4V 900MAH LI-PO
£24.99




Spare Battery For Wasp V4 - 11.1V 900MAH LI-PO
Model: KLP000


Spare Battery For Wasp V4 - 11.1V 900MAH LI-PO
£19.99




Spare CopterX Carbon Main Rotor Blades
Model: CX450-06-05
Spare CopterX Carbon Main Rotor Blades
£29.99




Spare CopterX Class 320mm Main Blades
Model: BL-320V-C-02


Spare CopterX Class 320mm Main Blades
£29.99




                                                 Page 200/219
                                          08/2011




Spare Landing Skid
Model: W54Q4-Z-12
Landing skid for Walkera Comanche
£2.99




Spare Li-po Battery (7.4v 800mah)
Model: WHM4-Z-28


Li-po Battery 7.4v 800mah for Dragonfly
£14.99




Spare Li-Po Battery, 7.4v 450mah
Model: 8002484


Spare Li-Po Battery, 7.4v 450mah
£19.99




Spare Main rotor blade A (4pcs)
Model: 8002482


Spare Main rotor blade A (4pcs)
£4.99




                                          Page 201/219
                                                        08/2011




Spare Main rotor blade B (4pcs)
Model: 8002481


Spare Main rotor blade B (4pcs)
£4.99




Spare Plastic Blade A
Model: 8EK1-0312


Spare Plastic Blade A for co-axial RC helicopters.
£5.99




Spare Plastic Blade B
Model: 8EK1-0313


Spare Plastic Blade B for co-axial RC helicopters.
£5.99




Spare Rotor Blades (4 pcs)
Model: W54Q4-Z-02
Main rotor blade for Walkera Comanche upper and lower
£5.99




                                                        Page 202/219
                                                            08/2011




Spare Set Of Main blades 4CH
Model: 8000189
Spare Set Of Main blades for use with 4CH RC helicopters.
£9.99




Training Set
Model: 8000203


Training Set for use with RC helicopters.
£12.99




                                                            Page 203/219
                                                               08/2011




RC Plane Parts




                 2.4ghz 4CH Transmitter Mode 2 with Receiver
                 Model: ST-4CHTX


                 2.4ghz 4CH Transmitter Mode 2 with Receiver
                 £44.99




                 2.4ghz 5CH Transmitter Mode 2 With Receiver
                 Model: ST-5CHTX
                 2.4ghz 5CH Transmitter Mode 2 With Receiver
                 £55.99




                 AC/DC Adaptor (UK)
                 Model: DYA-0003
                 AC/DC adaptor for DC-3 SkyBus
                 £7.99




                                                               Page 204/219
                                                                08/2011




GP Rechargeable Batteries and Charger For Radio Equipment (A)
Model: 0BATTPACKA


1 x GP AA battery charger
8 x Rechargeable GP AA 1300mAh batteries
£19.99




HC Hobby 2200 mAh 20C Li-Po Battery Pack
Model: C500001
HC Hobby 2200 mAh 20C Li-Po Battery Pack
£34.99




HC Hobby 5Ch Mode 2 Transmitter 2.4ghz
Model: CTRANSMITTER
HC Hobby 5Ch Mode 2 Transmitter 2.4ghz
£19.99




HC Hobby 6Ch Receiver 2.4ghz
Model: CRECEIVER


HC Hobby 6Ch Receiver 2.4ghz
£12.99




                                                                Page 205/219
                                         08/2011




HC Hobby Balanced LiPo Charger
Model: C200001


HC Hobby Balanced LiPo Battery Charger
£29.99




Spare 11.1v 1000mah Battery
Model: GBATT11.1-10


Spare 11.1v 1000mah Battery
£24.99




Spare 11.1V 1300mah Battery
Model: ST-11.1V1300


Spare 11.1V 1300mah Battery
£29.99




Spare 11.1V 1500mah Battery
Model: GBAT11.1-150


Spare 11.1V 1500mah Battery
£24.99




                                         Page 206/219
                                                         08/2011




Spare 11.1v 2200mah 15C Li-po Battery
Model: DY-6006


Spare 11.1v 2200mah 15C Li-po Battery for DC-3 SkyBus.
£34.99




Spare 11.1V 2500mah Battery
Model: ST-11.1V2500


Spare 11.1V 2500mah Battery
£59.99




Spare 14.8V 2200mah Battery
Model: ST-14.8V2200


Spare 14.8V 2200mah Battery
£44.99




Spare 5*5 Propeller
Model: DYP-1001
Spare 5*5 Propeller for Dynam planes.
£3.99




                                                         Page 207/219
                                                     08/2011




Spare 7.2v 650mah Ni-Mh Battery
Model: DY-6011


Spare 7.2v 650mah Ni-Mh Battery for Dynam planes.
£9.99




Spare 7.4v 1800mAh Li-Po Battery
Model: 450-SP-218


Spare 7.4v 1800mAh Li-Po Battery for Dynam planes.
£24.99




Spare 8*4 Propeller (2pcs)
Model: DYP-1002
Spare 8*4 Propeller (2pcs) for DC-3 SkyBus.
£3.99




Spare 8.4V 600mah Battery
Model: GBATT8.4-600


Spare 8.4V 600mah Battery
£14.99




                                                     Page 208/219
                                                   08/2011




Spare 8.4V 650mah Battery
Model: GBATT8.4-650


Spare 8.4V 650mah Battery
£16.99




Spare 9.6v 650mah Battery
Model: GBAT9.6-650


Spare 9.6v 650mah Battery
£16.99




Spare Folding Propeller Blades
Model: 210-SP-006


Spare Folding Propeller Blades for Dynam glider.
£4.99




Spare Propeller for Extra 330
Model: EXA007


Spare Propeller for Extra 330
£3.99




                                                   Page 209/219
                                                                                                      08/2011




Spare Propellor 1pc
Model: GPROPWBIRD


For Guan'li prop planes.


Please contact us with the model of your plane and order number after purchasing this item, to ensure we get the
correct propellor for your model to you.


If purchased as an optional extra to an RC plane you will receive the correct propellor for the plane ordered.
£2.99




Spare Propellor Fan
Model: GPROPFAN
Spare Propellor Fan
£3.99




Spare Sport Propellor
Model: GPROPSPORT


Spare Sport Propellor
£3.99




Starmax Lipo Balance Charger for 11.1V
Model: ST-11.1VCHAR
Starmax Lipo Balance Charger for 11.1V
£9.99




                                                                                                      Page 210/219
                                             08/2011




Starmax Lipo Balance Charger for 14.8V
Model: ST-14.8VCHAR


Starmax Lipo Balance Charger for 14.8V
£14.99




Starmax Lipo Battery 11.1V 2200mah
Model: ST-11.1V2200
Starmax Lipo Battery 11.1V 2200mah
£29.99




Starmax Lipo Battery 14.8V 3700mah
Model: ST-14.8V3700
Starmax Lipo Battery 14.8V 3700mah
£89.99




Starmax RC 6ch 2.4Ghz Mode 2 With Receiver
Model: ST-6CHTX


Starmax RC 6ch 2.4Ghz Mode 2 With Receiver
£49.99




                                             Page 211/219
                                                                         08/2011




        Product name                                               Category     Page

1:14 Scale Spurt Radio Controlled Speed Boat 40" Long - MRS-757T6027       1:14 RC
                                  Boats       125
 1:16 Scale Racing RC Motorbike - MRM-3657-NM                 RC Motorbikes    187
1:16 Scale Dolphin Radio Controlled Boats with Water Co - MRS-6031        1:16 RC
                                  Boats       127
 2.4ghz 4CH Transmitter Mode 2 with Receiver - ST-4CHTX      RC Plane Parts    204
 2.4ghz 5CH Transmitter Mode 2 With Receiver - ST-5CHTX      RC Plane Parts    204
A-10 Thunderbolt II RTF 4CH RC Brushless Scale Model Je - G603Twin Motor RC Plan
                                        120
A-10 Warthog 64mm 5CH EDF Twin Rc Jet - 2.4GHz - ST-D14C       Twin Fan Jets     185
 A-4 Blue Angels Skyhawk 4CH EDF 55mm RC Jet - ST-D22A 55mm EDF Fan Jets       162
 AC/DC Adaptor (UK) - DYA-0003                               RC Plane Parts    204
 Accipiter Badius 4CH Electric RC Brushed Plane - G503     4CH Stunt Planes     87
Alpha Jet Camo 64mm 5CH RC EDF Jet Plane - 2.4GHz - ST-X25B 64mm EDF Fan Jets
                                        164
 AMX Red Vectored Thrust 64mm 5CH RC EDF Jet - ST-X24A 64mm EDF Fan Jets       166
Arrow Wind 1:16 Electric Remote Control Boat RTR - MRS-4017        1:16 RC Boats
                                        128
 Attacker 1/8 Nitro Rc Buggy - A3017T                     1:8 Nitro Rc Cars     67
 Backwash Pro Nitro Radio Controlled Buggy - H94166PRO1:10 RTR Nitro RC         42
 Backwash Nitro Radio Controlled Buggy - H94166        1:10 RTR Nitro RC        40
 Balance Li-po Battery Charger 7.4, 11.1v - AB1066     RC Car Upgrade Par      188
Barbarian NXL 1/8 Scale RC Nitro Monster Truck 2.4G - A3019T 1:8 Nitro Rc Cars
                                        69
Barbarian EXL 1/8 Scale Brushless RC Monster Truck 2.4G - A2019T-11:8 Brushless
                                   Cars       31
 Blue Bird - High-torque Steering Servo - GSC-900189   RC Car Upgrade Par      188
 Bug Crusher Electric Radio Controlled Truck - NBC-E   1:10 Electric RC C       17
 Bug Crusher Pro Nitro Remote Control Truck - NBC-NPRO1:10 RTR Nitro RC         45
 Bug Crusher Nitro Remote Control Monster Truck - NBC-N1:10 RTR Nitro RC         43
 Bullet Electric RC Buggy - Brushed Version - A2011T-V11:10 Electric RC C        18
 Bullet Electric Brushless RC Buggy - A2011T           1:10 Brushless Car       10
Catalina 4CH Brushless Twin Power RC Sea Plane 2.4GHz - G607Twin Motor RC Plan
                                        121
 Cessna 182 Red RC plane PNP VERSION - ST-T01A-PNP     Large Scale RC Pla       92
 Cessna EP 400 4CH Brushless Electric RC Plane - DY8924     RC Scale Planes    105



                                                                         Page 212/219
                                                                        08/2011




 Common Spares Parts Pack (Plastic) 3003 - 3003PARTS    RC Car Upgrade Par   189
 Common Spare Parts Pack (Plastic) - 3010PARTS          RC Car Upgrade Par   188
 Complete Hex/Screwdriver Set 6pcs - High Quality Tool S - H80216RC Helicopter
                                   Part     198
Complete Hex/Screwdriver Set 6pcs - High Quality Tool S - H80216RC Car Upgrade
                                   Par     189
 Condor Nitro Radio Controlled Buggy - A3001T           1:10 RTR Nitro RC      46
 Condor Pro Nitro Radio Control Buggy - A3002T          1:10 RTR Nitro RC      48
 Condor Pro Special Edition Nitro Buggy - A3002TSE      1:10 RTR Nitro RC      49
 Condor Self Build Nitro RC Buggy Kit - A3001           Unbuilt Nitro Cars     84
Conquistador Special Edition Nitro RC Trucks - A3006TSE1:10 RTR Nitro RC        52
 Conquistador Nitro RC Monster Truck - A3003T           1:10 RTR Nitro RC      50
CopterX ME V2 Pro RC Helicopter - KIT Version - CX450ME-KIT6Ch RC Helicopters
                                      142
CopterX ME V2 Rc Helicopter - RTF Version - CX450ME-RTF6Ch RC Helicopters      144
CopterX SE V2 Pro RC Helicopter - KIT Version - CX450SE-KIT6Ch RC Helicopters
                                      146
CopterX SE V2 Pro RC Helicopter - RTF Version - CX450SE-RTF6Ch RC Helicopters
                                      148
    CopterX 450 Pro Torque Tube RTF 2.4G RC Helicopter - CX450PROTT-R6Ch RC
                               Helicopters        137
    CopterX Black Angel Pro RC Helicopter - RTF Version - CX450BA-RTF6Ch RC
                               Helicopters        141
    CopterX Black Angel Pro RC Helicopter - KIT Version - CX450BA-KIT6Ch RC
                               Helicopters        139
 Cyclone Self Build Nitro RC Car Kit - A1001            Unbuilt Nitro Cars     85
 Cyclone Pro Nitro Radio Control Car - A1002T           1:10 RTR Nitro RC      54
 Cyclone Nitro Remote Controlled Car - A1001T           1:10 RTR Nitro RC      53
 Dynam DC-3 SkyBus 4 ch Brushless rc plane - DY8931        RC Scale Planes   106
 Dynam DC-3 SkyBus 4 ch Brushless rc plane - DY8931     Twin Motor RC Plan   122
 Esky Chinook 4CH RC Helicopter - 2.4GHz - 8002328      Co-Axial RC Helico   155
Esky Co-Comanche 4CH RC Helicopters- 2.4Ghz Version - 8000007Co-Axial RC Helico
                                      157
Extra 330 4CH Brushless Aerobatic RC Plane 2.4GHz - DY8923    4CH Stunt Planes
                                      88
EZ Hawk Electric 3CH RTF Brushless Trainer Plane - DY8925EZ RC Trainer Planes
                                      110
F-117 Blacknight Stealth 70mm EDF RC Jet PNP Version - ST-D21A-PNP 70mm EDF Fan
                                   Jets     180


                                                                        Page 213/219
                                                                         08/2011




F-15 Desert Vectored Thrust 70mm 5CH EDF Jet Plane - ST-D19D 70mm EDF Fan Jets
                                      182
F-35 Lightning 64mm Grey RC EDF Jet PNP Version - ST-D04A-PNP 64mm EDF Fan Jets
                                      167
F-4E Phantom II 64mm 4CH RC EDF Fighter Jet - 2.4GHz - ST-D04C 64mm EDF Fan Jets
                                      168
 F-5 64mm Tiger EDF RC Jet PNP Version - ST-D18A-PNP      64mm EDF Fan Jets   170
F-5E Camo 70mm 5CH EDF Jet With Retracts - 2.4GHz - ST-D03A 70mm EDF Fan Jets
                                      183
F-5E SWISS Tiger 64mm EDF 4CH RC Jet - 2.4GHz - ST-D18A 64mm EDF Fan Jets       171
F/A-18E 64mm Tiger PNP Version EDF RC Jet - ST-D01E-PNP 64mm EDF Fan Jets       174
F/A-18E 64mm Jolly Roger RC Jet EDF PNP Version - ST-D01B-PNP 64mm EDF Fan Jets
                                      173
F14 twin 70mm Jolly Roger Top Gun EDF RC Jet PNP Versio - ST-D08A-PNP         Twin
                                 Fan Jets    186
 F16 64mm RC Jet Vectored PNP Version in Black and Grey - ST-D29A-PNP 64mm EDF
                                 Fan Jets    176
 F9F Panther 64mm 4CH RC EDF Fighter Jet - 2.4GHz - ST-D10A 64mm EDF Fan Jets
                                      177
 Failsafe - S30124                                       RC Car Upgrade Par   189
 Female T-Connector - 33060                              RC Car Upgrade Par   189
 Fire Wolf Electric Brushless RC Buggy - A2003T          1:16 Brushless Car     28
 Flip and Dive Radio Controlled RC Boat 1:30 - MRS-4019       1:30 RC Boats    131
Flying Fish Electric Radio Controlled Drift Car - H941231:10 Electric RC C        19
 Focke-Wulf FW-190 4CH Fighter Scale Plane - G604               RC Warbirds   114
 Focus EP 400 Aerobatics 3D 4CH RTF Plane - DY8921         4CH Stunt Planes     90
 FS Racing Electric Radio Controlled Car Pro - FS531011:10 Electric RC C        23
FS Racing Electric Radio Control Buggy Pro - FS53888PRO1:10 Electric RC C        22
FS Racing Electric Remote Control Monster Truck - FS538041:10 Electric RC C        24
FS Racing Bolt 2WD Electric Remote Control Buggy - FS532881:10 Electric RC C
                                      20
  Genese 2200KV Brushless Motor + 120A HV ESC + Set-up Bo - GSC-ESC001RC Car
                               Upgrade Par    190
  GP Rechargeable Batteries and Charger For Radio Equipme - 0BATTPACKARC Car
                               Upgrade Par    190
  GP Rechargeable Batteries and Charger For Radio Equipme - 0BATTPACKBRC Car
                               Upgrade Par    190
    GP Rechargeable Batteries and Charger For Radio Equipme - 0BATTPACKARC
                              Helicopter Part      198


                                                                         Page 214/219
                                                                           08/2011




  GP Rechargeable Batteries and Charger For Radio Equipme - 0BATTPACKCRC Car
                                  Upgrade Par        190
GP Rechargeable Batteries and Charger For Radio Equipme - 0BATTPACKA        RC Plane
                                    Parts       205
GS CL-1 to AD+ World Conversion Upgrade Kit - GSC3004-CRC Car Upgrade Par         191
GS Racing XUT II Pro 1/8th Nitro Radio Controlled Trugg - GSC3070 1:8 Nitro Rc
                                     Cars       75
 GS Racing XUT RTR 1/8th Scale Nitro RC Truggy 2.4G - GSC3060APF 1:8 Nitro Rc
                                     Cars       77
 GS Racing Shadow SB1 Nitro Rc Buggy - GSC5215             1:10 RTR Nitro RC      58
 GS Racing 1:9 Scale Mitsubishi Pajero Conqueror Nitro R - GSC5315APF1:10 RTR
                                   Nitro RC           56
 GS Racing CLXE 1/8th Electric RC Buggy KIT - GSC8001ED1:8 Brushless Cars          33
GS Racing Storm Evo 25 1/8th RC Nitro Buggy - GSC2025CPF 1:8 Nitro Rc Cars          74
 GS Racing Vision EvoE RTR Brushless RC Car - GSC4282 1:10 Brushless Car          11
 GS Racing CLX Front Pivot Ball System Conversion Kit - GSC8001PRC Car Upgrade
                                     Par     191
GS Racing CL-1 1/8th Nitro Rc Rallycross Buggy - GSC3010APF 1:8 Nitro Rc Cars
                                        71
 GS Racing Vision Pro RTR Nitro RC Car 2.4G - GSC4182 1:10 RTR Nitro RC           61
GS Racing Storm CLX Pro 1/8th Nitro Rc Buggy KIT - GSC8001U 1:8 Nitro Rc Cars
                                        72
GS Racing ST1 1/10 Nitro Radio Controlled Truggy - GSC5100PT11:10 RTR Nitro RC
                                           59
GS XUT to XUT AD World Conversion Upgrade Kit - GSC3051-CRC Car Upgrade Par        192
  Hawk Sky 4CH Brushless Sport Trainer Plane - 2.4GHz - DY8925PRO RC Trainer
                                    Planes      111
 HC Hobby 5Ch Mode 2 Transmitter 2.4ghz - CTRANSMITTER         RC Plane Parts   205
 HC Hobby 6Ch Receiver 2.4ghz - CRECEIVER                      RC Plane Parts   205
 HC Hobby 2200 mAh 20C Li-Po Battery Pack - C500001            RC Plane Parts   205
 HC Hobby Balanced LiPo Charger - C200001                      RC Plane Parts   206
He 162 Salamander 64mm RC EDF Fighter Jet - 2.4GHz - ST-D05A 64mm EDF Fan Jets
                                        178
 Hi-speed Radio Controlled Hydro Rc Boats 1:16 Electric - MRS-6026         1:16 RC
                                    Boats       129
 HSP 2.4ghz TX and RX - H800024                            RC Car Upgrade Par   192
 HSP Brushless Air Racer - 2.4Ghz - H94126                 1:10 Brushless Car     12
HSP Gladiator 1/10th Scale Nitro Off Road Truggy - H941101:10 RTR Nitro RC           62
J3 Green Large Scale RC plane PNP Version - ST-T02B-PNPLarge Scale RC Pla          93


                                                                           Page 215/219
                                                                            08/2011




 Jaguar 3CH Military J3 Piper Cub RC Plane - G401-1            RC Scale Planes   107
Large Scale HC Hobby Mosquito 5Ch Rc Aeroplane - C-MOSQUITOLarge Scale RC Pla
                                        95
Large Scale HC Hobby B-25 Mitchell 5Ch Rc Aeroplane - C-B25Large Scale RC Pla
                                        94
Large Scale MX2 Green RC Plane PNP Version - ST-T03A-PNPLarge Scale RC Pla           98
Large Scale MX2 Blue RC Plane PNP Version - ST-T03B-PNPLarge Scale RC Pla           97
 LiPo Battery (7.4V 1600mAh) Upgrade For Air Racer - H18247RC Car Upgrade Par
                                        192
 Messerschmitt T-109 4CH Brushed Rc Plane - G606            Twin Motor RC Plan   123
Messerschmitt ME-109 4CH Brushless RC Plane 2.4Ghz - G602            RC Warbirds    115
Mighty 1/8th Scale Nitro Powered Pro Rc Truggy - A3018T-2PRO 1:8 Nitro Rc Cars
                                        78
 Mini Remote Control Hovercraft - MRCH-9106                         Hovercraft   132
 Model Technics ZZIP 25% 2.27 Litres Nitro Model Fuel - 25-2.27LRC Car Upgrade
                                     Par     193
 NB16 Nitro Radio Controlled Buggy - A3007T                 1:16 RTR Nitro RC      64
 NB16-T Nitro Radio Controlled Truggy - A3010T              1:16 RTR Nitro RC      65
    NINJA 400 6ch RTF 2.4GHz Remote Controlled Helicopter - KHN400-36Ch RC
                                  Helicopters         150
 Nitro Glow Starter Set - B1016                             RC Car Upgrade Par   193
 Option LED Light Kit For High Speed Air Racer - H23318RC Car Upgrade Par          194
   Optional Electric Starter - This replaces the manual pu - 0HPA-0004RC Car
                                  Upgrade Par         194
P51 Mustang Large Scale RC Plane Silver PNP Version - ST-T04B-PNPLarge Scale RC
                                     Pla     101
P51 Mustang Large Scale RC Plane Red PNP Version - ST-T04C-PNPLarge Scale RC Pla
                                            99
 P51D WWII Mustang Brushless 4CH RC Plane 2.4G - G501-2            RC Warbirds     116
 Pioneer Electric Brushless RC Truggy - A2010T              1:16 Brushless Car     29
 Radio Controlled RC Hovercraft - Electric - MRCH-6649              Hovercraft   133
Raptor Radio Controlled Electric Brushless Truggy - A2012T1:10 Brushless Car
                                        13
Raptor Radio Controlled Electric Truggy - Brushed Versi - A2012T-V11:10 Electric
                                     RC C        25
Self build Raptor Rc Truggy - Brushed Version - A2012S-BElectric Self Buil           37
Self Build Raptor RC Truggy - Brushless Version - A2012S-AElectric Self Buil
                                        38
ShengQi 1:5 Petrol RC Monster Trucks - FORD F-150 2.4Gh - ZCA1        1:5 Petrol Cars


                                                                            Page 216/219
                                                                        08/2011




                                           8
ShengQi 1/5th Scale Petrol Radio Control Baja Buggy 2.4 - ZCA5    1:5 Petrol Cars
                                           6
ShengQi 1/5th Petrol RC Monster Trucks - HUMMER 2.4Ghz - ZCA4    1:5 Petrol Cars
                                          4
 Snow Bird 3CH Electric Brushed RC Planes - DY8928      RC Trainer Planes    112
Sonic 185 Brushless 4CH 2.4G Brushless RC Glider - DY8929         RC Gliders    103
 Spare 11.1V 1800mAh Li-Po Battery - 3B1086            RC Car Upgrade Par    194
 Spare 11.1V Li-Po Battery for Werewolf - 3B1091       RC Car Upgrade Par    194
 Spare 11.1V 2500mah Battery - ST-11.1V2500                 RC Plane Parts   207
 Spare 11.1v 2200mah 15C Li-po Battery - DY-6006            RC Plane Parts   207
 Spare 11.1V 1500mah Battery - GBAT11.1-150                 RC Plane Parts   206
 Spare 11.1V 1300mah Battery - ST-11.1V1300                 RC Plane Parts   206
 Spare 11.1v 1000mah Battery - GBATT11.1-10                 RC Plane Parts   206
 Spare 14.8V 2200mah Battery - ST-14.8V2200                 RC Plane Parts   207
 Spare 3 Cell Li-Po Battery (11.1v/1300mah) - 3B1057   RC Car Upgrade Par    195
 Spare 5*5 Propeller - DYP-1001                             RC Plane Parts   207
 Spare 7.4v 1800mAh Li-Po Battery - 450-SP-218              RC Plane Parts   208
 Spare 7.2v 650mah Ni-Mh Battery - DY-6011                  RC Plane Parts   208
 Spare 7.4V Li-Poly Battery - 8EK1-0181                RC Helicopter Part    198
Spare 7.2V 3000mAh Battery with Tamiya Style Connector - FS511110RC Car Upgrade
                                   Par     195
 Spare 8*4 Propeller (2pcs) - DYP-1002                      RC Plane Parts   208
 Spare 8.4V 650mah Battery - GBATT8.4-650                   RC Plane Parts   209
 Spare 8.4V 600mah Battery - GBATT8.4-600                   RC Plane Parts   208
 Spare 9.6v 650mah Battery - GBAT9.6-650                    RC Plane Parts   209
 Spare ABS main rotor blade For Wasp V4 - KWH4-042     RC Helicopter Part    199
 Spare ABS main rotor blade For Wasp V3 - KWH3-044     RC Helicopter Part    199
 Spare ABS Main Blade For Ninja 400 - KNI-59           RC Helicopter Part    199
Spare Battery For Wasp V4 - 11.1V 900MAH LI-PO - KLP000RC Helicopter Part      200
 Spare Battery Pack - ZBATTERY                         RC Car Upgrade Par    195
 Spare Battery For Wasp V3 - 7.4V 900MAH LI-PO - KLP007RC Helicopter Part      200
Spare Battery For Ninja 400 -11.1V 1100MAH LI-PO - KLP001RC Helicopter Part     199
 Spare CopterX Carbon Main Rotor Blades - CX450-06-05 RC Helicopter Part     200
 Spare CopterX Class 320mm Main Blades - BL-320V-C-02 RC Helicopter Part     200
 Spare Folding Propeller Blades - 210-SP-006                RC Plane Parts   209
 Spare Landing Skid - W54Q4-Z-12                       RC Helicopter Part    201
 Spare Li-po Battery (7.4v 800mah) - WHM4-Z-28         RC Helicopter Part    201
 Spare Li-Po Battery, 7.4v 450mah - 8002484            RC Helicopter Part    201


                                                                        Page 217/219
                                                                          08/2011




 Spare Li Po Battery 11.1v 2200mah For Trooper - 3B1110RC Car Upgrade Par      195
 Spare Main rotor blade B (4pcs) - 8002481              RC Helicopter Part     202
 Spare Main rotor blade A (4pcs) - 8002482              RC Helicopter Part     201
 Spare Plastic Blade A - 8EK1-0312                      RC Helicopter Part     202
 Spare Plastic Blade B - 8EK1-0313                      RC Helicopter Part     202
 Spare Propellor 1pc - GPROPWBIRD                           RC Plane Parts     210
 Spare Propeller for Extra 330 - EXA007                     RC Plane Parts     209
 Spare Propellor Fan - GPROPFAN                             RC Plane Parts     210
 Spare Rotor Blades (4 pcs) - W54Q4-Z-02                RC Helicopter Part     202
 Spare Set Of Main blades 4CH - 8000189                 RC Helicopter Part     203
 Spare Sport Propellor - GPROPSPORT                         RC Plane Parts     210
 Spare Standard Battery Pack (7.2v 1800ma) - H03014     RC Car Upgrade Par     196
 Spare Team Infinity Glow Plug - 0EG0002                RC Car Upgrade Par     196
 Starmax Lipo Balance Charger for 14.8V - ST-14.8VCHAR      RC Plane Parts     211
 Starmax Lipo Balance Charger for 11.1V - ST-11.1VCHAR      RC Plane Parts     210
 Starmax Lipo Battery 11.1V 2200mah - ST-11.1V2200          RC Plane Parts     211
 Starmax Lipo Battery 14.8V 3700mah - ST-14.8V3700          RC Plane Parts     211
 Starmax RC 6ch 2.4Ghz Mode 2 With Receiver - ST-6CHTX      RC Plane Parts     211
 Starter Box - S401432                                  RC Car Upgrade Par     196
Super Cub Piper PA-18 4CH Brushless RC Plane - 2.4GHz - DY8927     RC Scale Planes
                                        108
Super Cyclone Electric RC Boat 1:16 scale RTR - MRS-6037       1:16 RC Boats     130
 Tiger Moth 4CH Brushless RC Biplane - 2.4GHz - G408           RC Warbirds     118
 Training Set - 8000203                                 RC Helicopter Part     203
Trooper Brushless Radio Controlled Short Course Truck - A2016T1:10 Brushless Car
                                            15
 Upgrade Parts Pack - 3010UPGRADES                      RC Car Upgrade Par     196
 Walkera HM Comanche Co-axial 4ch RC helicopter - W54Q4Co-Axial RC Helico      158
Walkera HM 4# Dragonfly 4ch RC Helicopter - 2.4Ghz - WHM44Ch RC Helicopters      135
 Warrior 1/8 Nitro Radio Controlled Buggy - A3015T       1:8 Nitro Rc Cars      80
 Warrior 1/8 Nitro Rc Buggy - Pro Version - A3015TPRO    1:8 Nitro Rc Cars      82
 Wasp V3 6ch CCPM RTF 2.4GHz RC Helicopter - KHWH03-7 6Ch RC Helicopters       151
 WASP V4 Belt 250 RTF 2.4G RC Helicopter - KHWH05-2     6Ch RC Helicopters     153
Werewolf 1/8 Brushless Electric RC Buggy - PRO Version - A2015TPRO1:8 Brushless
                                     Cars        34
 Werewolf 1/8 Brushless Electric RC Buggy - Standard Ver - A2015T1:8 Brushless
                                     Cars        35
 XSTR Electric Radio Control Buggy 2.4G - H94107        1:10 Electric RC C      26
Z008 Mini 4ch RC Helicopter RTF with Gyro and USB - MRH-Z008     Mini Helicopters


                                                                         Page 218/219
                                                                    08/2011




                                  160
Zzip Nitro Fuel 15% - World Class Model Fuel and made i - 162.27LTRRC Car
                            Upgrade Par   197




                                                                   Page 219/219

								
To top