1198011pdf by msds


									- - - - - - - - - - - - - - - - MATERIAL SAFETY DATA SHEET - - - - - - - - - - - - - - Tomyln
----------------------------------------------------------SECTION I ----------------------------------------------------------DISTRIBUTED BY: TOMLYN PRODUCTS, 2285 EAST LANDIS AVENUE VINELAND, NJ 08360 EMERGENCY TELEPHONE NUMBER: (609) 691-2411 CHEMICAL NAME AND SYNONYMS: See below TRADE NAME AND SYNONYMS: Mitaplex-R CHEMICAL FAMILY: Pesticide FORMULA: ----------------------------------------------------------SECTION II - HAZARDOUS INGREDIENTS ----------------------------------------------------------An insecticidal mixture which includes Cube Root Brittle Extract (Rotenone), Acetone and Propylene Glycol ----------------------------------------------------------SECTION III - PHYSICAL DATA ----------------------------------------------------------BOILING POINT (deg F): VAPOR PRESSURE (mm Hg.): VAPOR DENSITY (AIR = 1): SPECIFIC GRAVITY (H2O = 1): EVAPORATION RATE (__________ = 1): SOLUBILITY IN WATER: APPEARANCE AND ODOR: ----------------------------------------------------------SECTION IV - FIRE AND EXPLOSION HAZARD DATA ----------------------------------------------------------FLASH POINT (Method Used): Not determined FLAMMABLE LIMITS: LEL: UEL: EXTINGUISHING MEDIA: Foam, dry chemical or carbon dioxide SPECIAL FIRE FIGHTING PROCEDURES: Self contained breathing apparatus UNUSUAL FIRE AND EXPLOSION HAZARDS: Acetone is highly volatile and readily gives off flammable vapors. ----------------------------------------------------------SECTION V - HEALTH HAZARD DATA ----------------------------------------------------------THRESHOLD LIMIT VALUE: EFFECTS OF OVEREXPOSURE: EMERGENCY FIRST AID PROCEDURES: If in eyes or on skin, flush with plenty of water and call a physician. If ingested - induce vomiting and call a physician immediately. ----------------------------------------------------------SECTION VI - REACTIVITY DATA ----------------------------------------------------------STABILITY: Stable CONDITIONS TO AVOID: Strong oxidizing agents INCOMPATIBILITY (Materials to Avoid): HAZARDOUS DECOMPOSITION OR BYPRODUCTS: HAZARDOUS POLYMERIZATION: Will not occur CONDITIONS TO AVOID: ----------------------------------------------------------SECTION VII - SPILL OR LEAK PROCEDURES ----------------------------------------------------------STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Cover area with absorbant material and sweep up - dispose of properly in accordance with local regulations. WASTE DISPOSAL METHOD: Do not reuse container. Small quantities may be disposed of in trash according to labeled instructions. For larger quantities, consult local regulations. ----------------------------------------------------------SECTION VIII - SPECIAL PROTECTION INFORMATION ----------------------------------------------------------RESPIRATORY PROTECTION (Specify Type): Special protection not generally required when used in accordance with labeled directions. Avoid contact with skin or eyes.

VENTILATION: LOCAL EXHAUST: MECHANICAL (General): SPECIAL: OTHER: PROTECTIVE GLOVES: EYE PROTECTION: OTHER PROTECTIVE EQUIPMENT: ----------------------------------------------------------SECTION IX - SPECIAL PRECAUTIONS ----------------------------------------------------------PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Store in a cool and dry place. Keep product in the original container in a secure area. OTHER PRECAUTIONS: Read entire label carefully before use. ----------------------------------------------------------The information contained in this Material Safety Data Sheet has been compiled from information believed to be accurate and from our own experience. While we believe that the data presented is factual, ImmunoGenetics, Inc. and it affiliates make no warranty or representation, nor assumes any responsibility in conjunction with the use of this information. ----------------------------------------------------------DISCLAIMER OF EXPRESSED AND IMPLIED WARRANTIES: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representation as to the accuracy or completeness of the information contained therein, and assume no responsibility regarding the suitability of this information for the user's intended purposes or for the consequences of its use. Each individual should make a determination as to the suitability of the information for their particular purpose(s). A request has been made to the manufacturer to approve the contents of this material safety data sheet. Upon receipt a new MSDS will be made available. ----------------------------------------------------------COMPAS Code: 11980110

Page 1 of 1

To top