SECTION SF 30 BLOCK 14 CONTINUATION PAGE by yaoyufang

VIEWS: 3 PAGES: 10

									                                                                                                                                                 1. CONTRACT ID CODE              P AGE OF P AGES
      AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT                                                                                                      J                        1        10
2. AMENDMENT/MODIFICATION NO.                                3. EFFECTIVE DATE           4. REQUISITION/P URCHASE REQ. NO.                                         5. P ROJECT NO.(If applicable)

0002                                                                                     0010043527
                                                                 15-Aug-2011
6. ISSUED BY                                    CODE         W911S7                      7. ADMINISTERED BY (If other than item 6)                           CODE

  MICC ICO - FT LEONARD WOOD
  ATTN CCMI-CEU-LW                                                                                            See Item 6
  561 IOWA AVENUE
  P O BOX 140
  FORT LEONARD WOOD MO 65473-0140


8. NAME AND ADDRESS OF CONT RACT OR (No., Street, County, State and Zip Code)                                                             X 9A. AMENDMENT OF SOLICIT AT ION NO.
                                                                                                                                            W911S7-11-T-0141

                                                                                                                                          X 9B. DAT ED (SEE IT EM 11)
                                                                                                                                            22-Jul-2011
                                                                                                                                              10A. MOD. OF CONT RACT /ORDER NO.

                                                                                                                                              10B. DAT ED (SEE IT EM 13)
CODE                                                               FACILIT Y CODE
                                                          11. T HIS IT EM ONLY APPLIES T O AMENDMENT S OF SOLICIT AT IONS
 X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer                       is extended,        X is not extended.

     Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:
     (a) By completing Items 8 and 15, and returning              copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
     or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE
     RECEIVED AT THE P LACE DESIGNATED FOR THE RECEIP T OF OFFERS P RIOR TO THE HOUR AND DATE SP ECIFIED MAY RESULT IN
     REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter,
     provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNT ING AND APPROPRIAT ION DAT A (If required)


                                           13. T HIS IT EM APPLIES ONLY T O MODIFICAT IONS OF CONT RACT S/ORDERS.
                                               IT MODIFIES T HE CONT RACT /ORDER NO. AS DESCRIBED IN IT EM 14.
   A. T HIS CHANGE ORDER IS ISSUED PURSUANT T O: (Specify authority) T HE CHANGES SET FORT H IN IT EM 14 ARE MADE IN T HE
      CONT RACT ORDER NO. IN IT EM 10A.

   B. T HE ABOVE NUMBERED CONT RACT /ORDER IS MODIFIED T O REFLECT T HE ADMINIST RAT IVE CHANGES (such as changes in paying
      office, appropriation date, etc.) SET FORT H IN IT EM 14, PURSUANT T O T HE AUT HORIT Y OF FAR 43.103(B).
   C. T HIS SUPPLEMENT AL AGREEMENT IS ENT ERED INT O PURSUANT T O AUT HORIT Y OF:

   D. OT HER (Specify type of modification and authority)

E. IMPORT ANT : Contractor                      is not,            is required to sign this document and return                           copies to the issuing office.

14. DESCRIPT ION OF AMENDMENT /MODIFICAT ION (Organized by UCF section headings, including solicitation/contract subject matter
    where feasible.)

 The purpose of this amendment is to revise the specification. Please see Section C for changes.




Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND T IT LE OF SIGNER (T ype or print)                                              16A. NAME AND T IT LE OF CONT RACT ING OFFICER (T ype or print)

                                                                                              TEL:                                             EMAIL:

15B. CONT RACT OR/OFFEROR                                     15C. DAT E SIGNED               16B. UNIT ED ST AT ES OF AMERICA                                              16C. DAT E SIGNED

                                                                                              BY                                                                             15-Aug-2011
   (Signature of person authorized to sign)                                                           (Signature of Contracting Officer)
EXCEPT ION T O SF 30                                                                  30-105-04                                                              ST ANDARD FORM 30 (Rev. 10-83)
APPROVED BY OIRM 11-84                                                                                                                                       Prescribed by GSA
                                                                                                                                                             FAR (48 CFR) 53.243
                                                                                             W911S7-11-T-0141
                                                                                                         0002
                                                                                                  Page 2 of 10

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES


SECTION B - SUPPLIES OR SERVICES AND PRICES



    CLIN 0018
        The CLIN description has changed from Projection Screen to CLIN is Deleted.
        The CLIN extended description has changed from Electrol Video Format; 57"x77"; Matte White(Dalite
74674)"Brand Name Or Equal" to DO NOT QUOTE THIS CLIN.
        The pricing detail quantity has decreased by 2.00 from 2.00 to 0.00.



    CLIN 0021
        The pricing detail quantity has decreased by 1.00 from 2.00 to 1.00.



     CLIN 0024
          The CLIN extended description 1 year Customer Service (aside from Warranty and Limitation of Liability
as provided by 52.212-4)*Provide Budgetry Estimate for following 2 years of Customer Service has been added.


SECTION C - DESCRIPTIONS AND SPECIFICATIONS



The following have been modified:
     SPECIFICATION
Specifications for Training Support Center Classroom Audio/Visual installation

***SUBJECT TO THE AVAILABILITY OF FUNDS – SEE SECTION I, FAR CLAUSE 52.232-18***
                      QUOTES MUST BE VALID THRU 30 September 2011

1. Scope: Purchase, program, and install control device, associated termination products, audio/visual
equipment (listed in the tasks section), video teleconferencing system, cable supporting products and
molding/raceway products so as to compliment and maintain a professional office environment within
the Training Support Center Classrooms Bldg 12350. The Government’s Space is two rooms (classroom
one (teleconference classroom) approx 20' x 37' and classroom two 20’ x 20’). The ideal system will
consist of the following audio visual pieces of equipment:

          3 ea 66” or 70” LED or LCD display with pitch adjustable wall mount
          2 ea Flat panel display smart board
          2 ea 15” interactive pen display smart board (EX: SMART ID350)
          2 ea Vertical rack (36” or 48”) for rack-mounted components, with casters, locking door, and
          storage utility drawer, 10 outlet plug strip, and rack fan
          2 ea Dual Deck DVD record and SVHS/VHS record and playback system (EX: JVC SR-DVM700)
          2 ea Rack mount for DVD combo (EX JVC RKMV-5)
                                                                                 W911S7-11-T-0141
                                                                                             0002
                                                                                      Page 3 of 10

     6 ea Ceiling mounted speakers
     2 ea LCD Projector (EX: Mitsubishi XL6500U/LU)with ceiling mounting bracket.
     2 ea Mixer AMP (must incl. Microphone/Speaker feedback inhibitor)
     2 ea RF Tuner
     2 ea Control system with touch panel, desk top docking station, PS, and extra stylus. (Cannot
     be wireless) (Programming will be included) (EX: Crestron TPS-4000 and Pro-2)
     2 ea High Def Ceiling Mounted document camera
     2 ea 8x8 Matrix XGA switcher with audio
     1 ea Sony EVID100 PTZ camera (or compatible equivalent)
     1 ea Codec 3000 MXP (384 kbps ISDN/1.5Mbps IP) (or compatible equipment)
     1 ea Codec 3000 MXP Natural Presenter Package (or compatible equivalent)
     1 ea Network Terminator NT-3 device
     1 ea Customer Core Services for Codec 3000 MSP
     1 ea Polycom VTX1000 or VTX1100 Teleconference system
     2 ea Rack mounted 2U unit computer
     1 ea Complete installation of A/V equipment by vendor (including cables, connectors, small
     tools, travel, Per Diem, and any additional hardware not listed)


2.   Tasks

       a. Purchase two Control systems with touch panel, ancillary equipment, power supply, all
          miscellaneous cables and connectors (Can not be wireless). Recommend Crestron TPS-
          4000 and Pro-2 device.
       b. Program the control devices to interface with all new A/V equipment, 2U computer, and
          video teleconferencing equipment (Codec will be a Tandberg 3000 MXP). The
          government will be provided the un-compiled controller basic program code of all
          programming (see Item 3d for details).
       c. Install one control device, ancillary equipment, power supply, all miscellaneous cables,
          and connectors within the classroom one and the other control device, ancillary
          equipment, power supply, all miscellaneous cables, and connectors within in classroom
          two as per the room drawing provided.
       d. Purchase two vertical racks (36” to 48”) with casters, locking door, and storage utility
          drawer, 10 outlet plug strip, and fan. Install one rack within in classroom one and the
          other rack in classroom two as per the room drawing provided.
       e. Purchase and install two (2) ea 66” or 70” LED/LCD Display, w/speakers, and mount
          within classroom one as per the room drawing provided.
       f. Purchase and install one (1) ea 66” or 70” LED/LCD Display, w/speakers, and mount
          within classroom two as per the room drawing provided.
       g. Purchase and install one (1) Smart board for a Flat-panel display and setup to interface
          with left side display and mount within classroom one as per the room drawing
          provided.
       h. Purchase and install one (1) Smart board for a Flat-panel display and setup to interface
          with display and mount within classroom two as per the room drawing provided.
       i. Purchase two LCD Projectors with ceiling mounts. Mount one in classroom one and the
          other in classroom two as per the drawing provided.
                                                                                  W911S7-11-T-0141
                                                                                              0002
                                                                                       Page 4 of 10

       j.   Purchase and install two rack mounted 2U unit computers with the following minimum
            configuration; (Intel Core 2, 3 GHz processor, 4 GB RAM, 16X DVD±RW Optical Drive,
            250GB SATA-3.0 Hard Disk Drive, USB Optical mouse, and USB CAC Keyboard). Install
            one system in classroom one’s A/V rack and the other in classroom two’s A/V rack as
            per the drawing provided.
       k.   Purchase and install two (2) tabletop interactive pen display smart board. Install one in
            classroom one and the other in classroom two as per the drawing provided.
       l.   Purchase and install a VTC system - Including Tandberg 3000 codec (384KB ISDN, 1.5
            Mbps IP, Natural Presenter Package), PTZ camera, and NT-3 device. These devices will
            be installed in classroom one’s A/V rack mentioned above, except the PTZ camera,
            which will be installed in the front of the classroom as per the room drawing provided.
            The system will integrate with the control system and the other audio visual
            components listed in this statement of work for classroom one.
       m.   Provide telephone conferencing capability through the Tandberg system.
       n.   Purchase and install one (1) Polycom Teleconference systems. Install the system in
            classroom two as per the room drawing provided.
       o.   Purchase and install two High Def Ceiling Mounted document cameras. Install one
            system near instructor’s station within classroom one and the other system in classroom
            two as per the room drawing provided.
       p.   Purchase and install the following audio visual components to support devices included
            in this work statement for classroom one. System must have the capability to support
            three (3) microphones (two tabletop microphones and one mobile). These components
            will be installed in the A/V rack within classroom one (with the exception of the ceiling
            speakers) as per the room drawing provided.
                    Dual Deck DVD record and SVHS/VHS record and playback system w/rack
                       mount
                    RF Tuner
                    Mixer amp
                    8x8 Matrix XGA switcher
                    Four ceiling mounted speakers.
       q.   Purchase and install the following audio visual components to support devices included
            in this work statement for classroom two. These components will be installed in the A/V
            rack within classroom two (with the exception of the ceiling speakers) as per the room
            drawing provided.
                    Dual Deck DVD record and SVHS/VHS record and playback system w/rack
                       mount
                    RF Tuner
                    Mixer amp
                    8x8 Matrix XGA switcher
                    Two ceiling mounted speakers.
       r.   Purchase and install all cabling, cable connectors, small tools, hardware components,
            and supplies required to complete the full installation, operation, and testing of the
            components listed within this work statement.
       s.   Purchase and install wall molding/raceways and pull poles when/where required to
            support cabling installation where current cable trays are not present.

3.   Standards
                                                                                   W911S7-11-T-0141
                                                                                               0002
                                                                                        Page 5 of 10


       a. The final projector location will be determined by the zoom specification of the
          projector, maximizing the ability to zoom in and out. The preferred location will be
          where the projections size will also allow for zooming in and out from the mid range of
          the zoom to both ends of the zoom spectrum. Structural and environment restrictions
          will be taken into account in final placement of the projector.
       b. The cabling will be routed, where possible, behind the finished surface. The intent is to
          use as little Panduit surface mounted material as possible. Where cabling protrudes
          thru the wall, cables will be terminated and connected to a mounted wall plate. Cabling
          will be supplied from the wall plate to the output devices in an easy quick
          connect/disconnect setup.
       c. The control device must interface with all audio visual components, the video
          teleconferencing system, briefing computers and the devices included in this work
          statement.
       d. System Code. For all requirements which require the Contractor to prepare a complex
          solution the contractor shall provide the government a copy of the "as-built" drawings
          for the integrated system, and a CD format copy of the un-compiled controller basic
          program code and all associated files necessary to be able to create a compiled code
          with the control system manufacturer’s software prior to the government acceptance.
       e. All audio visual components must be fully integrated through the control station.
       f. Video conferencing system must have the capability to control presentations from the
          control station’s control device.
       g. All equipment will be operational upon completion of work.
       h. All equipment will be within the manufacturer’s specifications/standards and local
          technical acceptance standards.
       i. All work is to be performed IAW local, EIA, TIA and Bell Standards.
       j. Wire mold shall be used for cable install when wall pulls are impractical.
       k. Contractor shall not exceed cable pull tensions recommended by the manufacturer.
       l. In such situations where cabling is not in a cable tray, wire way or pathway, the cable
          shall be suspended a minimum of 8 inches above ceilings by cable supports, no greater
          than 60 inches apart.
       m. Cable shall not be run through structural members or in contact with pipes, ducts, or
          other potentially damaging items.
       n. Placement of cable parallel to power conductors shall be avoided, if possible; a
          minimum separation of 12 inches shall be maintained when such placement cannot be
          avoided.
       o. Placement of unclassified cable parallel to classified shall be avoided, if possible; a
          minimum separation of one meter (39 inches) shall be maintained when such placement
          cannot be avoided.
       p. Plenum cable shall be used, IAW local fire code and at the direction of Directorate of
          Public Works.
       q. Plenum cables shall comply with flammability plenum requirements of NFPA 70.

4.   Quality Assurance

       a. All components will be tested by the contractor and all test results shall be given to the
          Government.
                                                                                     W911S7-11-T-0141
                                                                                                 0002
                                                                                          Page 6 of 10

            b. An operational test will be conducted with the DOIM Technical point of contact prior to
               final acceptance.
            c. The contractor will follow all Federal, State and Local Safety Regulations.
            d. Select ceiling tiles and floor panels will be left open for inspection of work by
               government on last day of install.

*** Contact Mr. David Wiseman four (4) weeks prior to installation ***


SECTION F - DELIVERIES OR PERFORMANCE

The following Delivery Schedule item for CLIN 0018 has been changed from:

        DELIVERY DATE              QUANTITY           SHIP TO ADDRESS                        UIC

        60 dys. ADC                2                  TADSS                                  W90NME
                                                      TADSS
                                                      684 MINNESOTTA AVE
                                                      FORT LEONARD WOOD MO 65473
                                                      FOB: Destination


To:

        DELIVERY DATE              QUANTITY           SHIP TO ADDRESS                        UIC

        60 dys. ADC                0                  TADSS                                  W90NME
                                                      TADSS
                                                      684 MINNESOTTA AVE
                                                      FORT LEONARD WOOD MO 65473
                                                      FOB: Destination


The following Delivery Schedule item for CLIN 0021 has been changed from:

        DELIVERY DATE              QUANTITY           SHIP TO ADDRESS                        UIC

        60 dys. ADC                2                  TADSS                                  W90NME
                                                      TADSS
                                                      684 MINNESOTTA AVE
                                                      FORT LEONARD WOOD MO 65473
                                                      FOB: Destination


To:

        DELIVERY DATE              QUANTITY           SHIP TO ADDRESS                        UIC

        60 dys. ADC                1                  TADSS                                  W90NME
                                                      TADSS
                                                      684 MINNESOTTA AVE
                                                      FORT LEONARD WOOD MO 65473
                                                      FOB: Destination
                                                                                                  W911S7-11-T-0141
                                                                                                              0002
                                                                                                       Page 7 of 10




SECTION H - SPECIAL CONTRACT REQUIREMENTS



The following have been modified:
      LOCAL INSTRUCTIONS
H1 USE OF TOBACCO PRODUCTS ON FORT LEONARD WOOD
The Contractor and its employees shall be familiar with and shall comply with the provisions of Executive Order
13058, Protecting Federal Employees and the Public From Exposure to Tobacco Smoke in the Federal Workplace,
and Title 41 CFR Part 102-74.315 [73 Federal Register 77518, Dec. 19, 2008].
H2 FIRE PREVENTION
a. The current Post Fire Regulations, AR 420-90, Fire Prevention and Protection, and FLW Supplements to AR
420-90 are by this reference made a part of this solicitation and resultant contract. The Contractor’s operations shall
conform to all applicable portions of those documents. All personnel entering on duty as Contractor’s employees
shall be instructed in the fire prevention program of the Post and shall be advised of the requirement of the Post Fire
Regulations as they pertain to this particular contract.
b. The Contractor shall obtain a written “Hot Work Permit” (DA Form 5383-R) prior to commencing all hot work
outside an approved shop area. Permits will be issued by the Fort Leonard Wood Fire Department, (573) 596-0883,
after all necessary precautions have been taken, such as wetting down the area, protection of combustible material,
and positioning of first aid fire extinguishers of proper type and class. Permits must be obtained in advance for use
of open flame devices, such as blow torches, portable furnaces, tar kettles, or gas and electric welding and cutting
equipment. Preparation and protection for such areas are the responsibility of the Contractor accomplishing the
work. An inspection conducted by the Fire Department prior to commencing work may be required; however, the
Contractor shall conduct an inspection of the area at least 30 minutes after completion of all work. The Contractor
shall be liable for any fire loss to Government property attributable to negligence on the part of the Contractor,
including failure to comply with fire prevention measures prescribed by terms of this contract.
c. The Fire Prevention-Protection Division is responsible for monitoring the Contractor in the area of fire
prevention and advising the Contracting Officer of all deficiencies. The Contracting Officer will alert the Contractor
if a violation is a fire hazard or fire protection deficiency.
d. The provision in no way authorizes anyone other than the Contracting Officer to commit the Government to
changes in the terms of the contract.
H3 NORMAL WORKING HOURS
a. The Contractor shall schedule his working hours to coincide with the working hours of the military reservation.
Normal working hours of the reservation are 7:30 a.m. to 4:00 p.m., Monday thru Friday, Legal Public Holidays
excepted. The Contractor shall not perform work on the reservation beyond the aforementioned working hours
without the written approval of the Contracting Officer.
For informational purposes, the Government observes the following holidays:
           New Year’s Day, 1 January
           Martin Luther King, Jr.’s Birthday, the third Monday in January
           Presidents’ Day, the third Monday in February
           Memorial Day, the last Monday in May
           Independence Day, 4 July
           Labor Day, the first Monday in September
           Columbus Day, the second Monday in October
           Veterans Day, 11 November
           Thanksgiving Day, the fourth Thursday in November
           Christmas Day, 25 December
When such holidays fall on a Saturday, the preceding Friday will be considered a holiday. When such holidays fall
on a Sunday, the succeeding Monday will be considered a holiday. (Applicable to Government personnel only.)
b. If the Contractor for his convenience desires to perform work during other than normal working hours or on other
than normal workdays, he shall notify the Contracting Officer in writing at least 72 hours in advance. The
Contractor shall not perform work beyond the normal working hours or normal workdays without the Contracting
                                                                                                   W911S7-11-T-0141
                                                                                                               0002
                                                                                                        Page 8 of 10

Officer’s written approval. The Contractor shall reimburse the Government for any additional expense occasioned
the Government thereby, such as, but not limited to, overtime pay for Government inspectors, utilities service, etc.
H4 UTILIZATION OF HEAVY TRACKED OR WHEELED EQUIPMENT
All projects that require the use of any heavy tracked or wheeled equipment on the streets will require prior approval
by the Directorate of Public Works.
H5 PREVENTION OF TRAINEE ABUSE
The Contractor and its employees shall be familiar with and shall comply with the provisions of Fort Leonard Wood
(FLW) Regulation 350-12, Training Leadership, as presently written and as subsequently amended. The Contractor,
upon its request, shall be furnished with a copy of FLW Regulation 350-12. However, failure to request a copy of
the regulation will not relieve the Contractor from complying with the requirements of this paragraph.
H6 EMPLOYEES OF CONTRACTOR
a. The Contractor shall furnish to the Contracting Officer upon commencement of work under this contract a written
statement containing the complete name, address, and job title of each employee including subcontractor employees
engaged in performance of the work under this contract. In the event of a change in employees necessitated by
illness, change in personnel, or other reasons, the Contractor shall advise the Contracting Officer of the change and
shall furnish him the same information on the new employee prior to his arrival on the premises.
b. The Contractor shall be responsible for the performance and conduct of his employees, to include subcontractor
employees, at all times while performing under the contract. Employees of the Contractor or subcontractor may be
denied entry to the installation by the military police or other authorized Government authority if it is determined
that such entry may be contrary to good order, discipline or the security of the installation. Pursuant to 18 U.S.C.
1382, the Installation Commander may bar individuals from entry on the installation.
H7 LIABILITY OF CONTRACTOR
The Contractor shall be liable for injuries or damages to persons or property resulting from the negligent acts or
omissions of the Contractor, his agents, employees and/or subcontractors.
H8 REGISTRATION OF VEHICLES
1. All motor vehicles within the boundaries of Fort Leonard Wood, Missouri, utilized by the Contractor and/or his
employees (POV's included) must be registered with the Law Enforcement Command (LEC). Vehicle registration is
a Department of the Army requirement.
2. All motor vehicles will be registered utilizing Department of Defense decals with expiration dates and
installation identification. The vehicle registration processing point is located in the Visitor’s Center, Building 100
at the Main Gate (Sverdrup) of Fort Leonard Wood, Missouri.
3. A Department of Defense decal will be issued for each registered vehicle. Contractors and Contractor employees
will be issued one of two types of decals, depending upon the length of time of the contract. For contracts of a year
or more in duration, an annually renewable decal will be issued. For those contracts of less than one year, a
temporary pass will be issued. Contractor personnel who are eligible to register as retired military or dependent of
military must register in such a manner.
4. Required documentation for registration consists of the following:
              -current valid driver's license
             -state vehicle registration
             -state safety inspection (if required by state of registration)
             -proof of insurance
             -motorcycle safety course (applicable to motor cycle registration only)
             -military, civilian or contractor identification
             -letter of employment verification (submitted on Company letterhead endorsed by the Ft. Leonard Wood
requiring activity who is the receiver of the service)
5. Decals must be permanently affixed to the vehicle. Authorized location is the upper center of the windshield,
under the rear view mirror (right front post for motor cycles). All individuals are responsible for their decals. If the
vehicle is sold, traded, incapacitated in any way, or employment is terminated, the individual must remove (scrape
decal off window) the decal and return it to LEC and they will destroy the sticker.
6. Vehicles without authorized decals are subject to being stopped for purposes of identification and/or issuance of a
daily or visitor pass.
H9 ACCIDENT PREVENTION AND SAFETY REQUIREMENTS
                                                                                                 W911S7-11-T-0141
                                                                                                             0002
                                                                                                      Page 9 of 10

a. In order to provide safety controls for protection to the life and health of employees and other persons, for
prevention of damage to property, materials, supplies and equipment, and for avoidance of work interruption in the
performance of this contract, the Contractor shall comply with all pertinent provisions of the Occupational Safety
and Health Act of 1970, Public Law 91-596. The Contractor shall also take or cause to be taken such additional
measures as the Contracting Officer may determine to be reasonable and necessary for the purpose.
b. The Contractor shall maintain an accurate record of, and shall report to the Contracting Officer in the manner and
on the forms prescribed by the Contracting Officer, exposure data and all accidents resulting in death, traumatic
injury, occupational disease and damage to property, materials, supplies, and equipment incident to work performed
under this contract.
c. The Contracting Officer will notify the Contractor of any non-compliance with the foregoing provisions and the
action to be taken. The Contractor shall, after receipt of such notice, immediately take corrective action. Such
notice, when delivered to the Contractor or his representative at the site of the work, shall be deemed sufficient for
the purpose. If the Contractor fails or refuses to comply promptly, the Contracting Officer may issue an order
stopping all or part of the work until satisfactory corrective action has been taken. No part of the time lost due to
any such stop orders shall be made the subject of claim for extension of time or for excess costs or damages by the
Contractor.
d. Compliance with the provisions of this clause by subcontractors shall be the responsibility of the Contractor.
H10 CONTRACTOR CORRESPONDENCE REQUIREMENTS
All Contractor and subcontractor originated correspondence under this contract shall be on the originating firm’s
letterhead, except in the case where pre-printed Government forms are used, shall be typed or handwritten in a
legible manner, and shall be submitted in the signed original, with supporting copies as required by the Contracting
Officer.
H-11 QUALIFICATIONS OF CONTRACTOR PERSONNEL
Contractor Personnel: The Contractor shall be responsible for selecting and staffing personnel who are well qualified
to perform the work required. No personnel will be utilized to perform the work of any wage classification required
to perform the tasks called for by the contract, who does not possess the necessary training and experience to qualify
as a Journeyman in the particular occupational classifications the work is associated with in the local area
(Missouri).
Apprentices and Trainees: A limited number of apprentices and trainees may be utilized to perform contract
requirements to the extent permitted by FAR 52.222-9 and the regulations cited therein.
Qualifications: Unless another standard is required by law or specified elsewhere in the specifications for a
particular occupational classification, the standard to be applied in determining an individual’s qualifications to
perform at the Journeyman level shall be as follows: A Journeyman is an individual who has been performing work
in a particular building trade for at least four years under the supervision of a Master. A Master id defined as an
individual who has at least four years of satisfactory experience as a Journeyman in a particular building trade.
H12 REQUIRED INSURANCE
a. The Contractor shall, at its own expense, procure and maintain during the entire period of his performance under
this contract the following minimum insurance:
         TYPE                                                         AMOUNT
(1) Workmen’s Compensation

   Workmen’s Compensation Insurance
   shall comply with applicable Federal and
   State Workers’ compensation and
   occupational disease statutes and shall
   extend to cover employee’s liability for
   accidental bodily injury or death and
   for occupational disease with a minimum
   liability of the greater of:                                   $100,000.00 or the
                                                                   State minimum
                                                                   Requirements
(2) Comprehensive General Liability with
   minimum limits of:
   Per accident or occurrence for bodily injury                   $500,000.00
(3) Comprehensive Automobile Liability with
                                                                                                  W911S7-11-T-0141
                                                                                                              0002
                                                                                                      Page 10 of 10

    minimum limits of:
    Per Person                                                      $200,000.00
    Per Accident for Bodily Injury                                  $500,000.00
    Per Accident for Property Damage                                 $ 20,000.00
b. Prior to commencement of work hereunder, the Contractor shall furnish to the Contracting Officer, a certificate
or written statement of the above required insurance. The policies evidencing required insurance shall contain an
endorsement to the effect that any cancellation or any material change in the policies adversely affecting the
interests of the Government in such insurance shall not be effective for such periods as may be prescribed by the
laws of the State in which this contract is to be performed and in no event less than thirty (30) days after written
notice thereof to the Contracting Officer.
c. The Contractor shall insert the substance of this clause, including this paragraph c, in subcontracts under this
contract that require work on a Government installation and shall require subcontractors to provide and maintain the
insurance required in the Schedule, or elsewhere in the contract. At least five (5) days before entry of each such
subcontractor’s personnel on the government installation, the contractor shall furnish (or ensure that there has been
furnished) to the Contracting Officer a current certificate of insurance, meeting the requirements of paragraph b
above, for each such subcontractor.
H12 INSPECTION OF WORK
Technical surveillance of workmanship and inspection of materials for work being performed under this contract
shall be the responsibility of the Director of Training Support Center or his authorized representative. This
provision in no way authorizes anyone other than the Contracting Officer to commit the Government to changes in
the terms of the contract. In the event it is determined necessary to designate a COR for this contract, such
designation shall be by a separate letter to the individual selected with a copy furnished to the Contractor.
H13 UTILITIES
At work sites where Government utilities are currently available, the Government will provide necessary utilities for
the completion of the work at no charge to the Contractor. The Contractor must satisfy himself as to the extent of
Government utility services available at each site and include any costs associated with the providing of necessary
utilities, not available from the Government, in the prices bid for the applicable bid item.
H-14 TAXES
The Missouri Department of Revenue agrees that contractors, subcontractors and material suppliers may claim an
exemption from Missouri sales and use tax with respect to tangible personal property and materials purchased or
used for the purpose of constructing, repairing or remodeling facilities for the United States of America, its agencies
and instrumentalities (“the United States”). Therefore, the Contracting Officer shall provide a project exemption
certificate to the successful contractor awarded this project. The Contractor shall further provide the project
exemption to all subcontractors purchasing construction materials for this project.
NOTE: THE PROJECT EXEMPTION CERTIFICATE DOES NOT ALLOW CONTRACTORS TO PURCHASE
MACHINERY, EQUIPMENT, OR TOOLS USED IN FULFILLING THIS CONTRACT, TAX EXEMPT.




(End of Summary of Changes)

								
To top