Docstoc

Wireline Snipper

Document Sample
Wireline Snipper Powered By Docstoc
					Wireline Snipper



                                                      The wireline snipper is used to cut the wireline at the
                                                      rope socket. The wireline snipper is assembled
                                                      around the wireline and dropped from surface. When
                                                      the snipper contacts the rope socket the lower portion
                                                      is forced upward, and the center wedge is forced
                                                      sideways, and cuts the wireline. If the force was
                                                      insufficient to cut the wireline, a flat bottomed go-
                                                      devil is then placed on the wireline and dropped on
                                                      top of the snipper to finish the cut. The snipper and
                                                      any go devils can be fished out of the hole with
                                                      standard fishing tools.




                                       Specification Guide

                             1 1/4”         1 1/2”          1 7/8”            2 1/8”            2 1/2”
         .082-.108 Wire    G125KS00A     G150KS00A       G187KS00A         G212KS00A         G250KS00A
Part #   .108 -.125 Wire   G125KS00B      G150KS00B      G187KS00B         G212KS00B         G250KS00B
         7/32 Wire             -              -          G187KS00D         G212KS00D         G250KS00D
Fishneck OD.                1 3/16”         1 3/8”          1 3/4”            1 3/4”             1 3/4”

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:26
posted:9/8/2011
language:English
pages:1