To upgrade to software version 3

Document Sample
To upgrade to software version 3 Powered By Docstoc
					To upgrade to software version 3.1
****To UPGRADE 450 use files b4504401.img and b4504402.img
    To UPGRADE BPS use files bps2k310.img and bps2k310.diag
Here is what you should see after the upgrade.

 BPS: FW:3.0.0.5 SW:v3.1.0.78 ISVN:2
 450T: FW:V1.48 SW:v4.4.0.6

To upgrade to software version 3.1.1.14
The instruction below assumes that you already upgraded a stack to 3.1.

 Here is what you should see before the upgrade.

   BPS: FW:3.0.0.5 SW:v3.1.0.78 ISVN:2
   450T: FW:V1.48 SW:v4.4.0.6

 Here is what you should see after the upgrade:

   BPS: FW:3.0.0.5 SW:v3.1.1.14 ISVN:2
   450T: FW:V1.48 SW:v4.4.0.6


Step #1, load image files first

                     Software Download

    BPS 2000 Image Filename:       [ nortel_bps_test.img ]
    BPS 2000 Diagnostics Filename:   []

    450 Image Filename:         []
    TFTP Server IP Address:       [ 128.143.22.48 ]
    Start TFTP Load of New Image:     [ Software Image ]

**********************************************************
**********************************************************
To Get software version 3.0
Here is what you should see after the upgrade.

   BPS: FW:3.0.0.5 SW:v3.0.6.08 ISVN:2
   450T: FW:V1.48 SW:v4.4.0.6

-------------------------------------------------------------------------

Instructions for 450 only: It's important to download the firmware first.

step #1
  download boot code image - b4504401.img

 step #2
   download agent image - b4504402.img
   * don't need it if you are using 4.2 software since it's the same
firmware.

 -------------------------------
 Instructions for Hybrid mode: (yes, the download order is reverse from
450T).

Step #1, load image files first

                        Software Download

     BPS 2000 Image Filename:       [ bps2k306.img ]
     BPS 2000 Diagnostics Filename:   []

     450 Image Filename:         [ b4504402.img ]
     TFTP Server IP Address:       [ 128.143.22.48 ]
     Start TFTP Load of New Image:     [ BPS 2000 and 450 Image ]


 ** or you can use the following in NNCLI in config mode:

  download address 128.143.22.48 image bps2k306.img bs450-image
b4504402.img
Step #2: load BPS diagnose file (don't need this if you are using 2.5.0)

                     Software Download

     BPS 2000 Image Filename:       []
     BPS 2000 Diagnostics Filename:  [ bps2k306.diag ]

     450 Image Filename:         []
     TFTP Server IP Address:       [ 128.143.22.48 ]
     Start TFTP Load of New Image:     [ BPS 2000 Diagnostics ]


 ** or you can use the following in NNCLI in config mode:

  download address 128.143.22.48 diag bps2k306.diag

 Step #3: load 450 diagnose file. Yes, it's reverse of 450 upgrade.
      (don't need this if you are already using the FW1.48, or
4.2.0.16)

                     Software Download

     BPS 2000 Image Filename:       []
     BPS 2000 Diagnostics Filename:  []

     450 Image Filename:         [ b4504401.img ]
     TFTP Server IP Address:       [ 128.143.22.48 ]
     Start TFTP Load of New Image:     [ 450 Image ]

**********************************************************
**********************************************************
Older Software Versions 2.5.2

****To DOWNGRADE 450 use files b45042d01.img and b45042d02.img
    To DOWNGRADE BPS use files bps2k252.img and bps2k252.diag

Here is what you should see after the upgrade.

  BPS: FW:2.5.0.3 SW:v2.5.2.04 ISVN:2
  450T: FW:V1.48 SW:v4.2.0.22

Instructions for 450 only: It's important to download the firmware first.

step #1
  download boot code image - b45042d01.img

step #2
  download agent image - b45042d02.img
  * don't need it if you are using 4.2 software since it's the same firmware.
--------------------------------------------------------------------------------------
Instructions for Hybrid mode: (yes, the download order is reverse from 450T).

Step #1, load image files first

                     Software Download

    BPS 2000 Image Filename:       [ bps2k252.img ]
    BPS 2000 Diagnostics Filename:   []

    450 Image Filename:         [ b45042d02.img ]
    TFTP Server IP Address:       [ 128.143.22.48 ]
    Start TFTP Load of New Image:     [ BPS 2000 and 450 Image ]

 ** or you can use the following in NNCLI in config mode:

 download address 128.143.22.48 image bps2k252.img bs450-image b45042d02.img
Step #2: load BPS diagnose file (don't need this if FW is at 2.5.0.3)

                    Software Download

    BPS 2000 Image Filename:       []
    BPS 2000 Diagnostics Filename:  [ bps2k252.diag ]

    450 Image Filename:         []
    TFTP Server IP Address:       [ 128.143.22.48 ]
    Start TFTP Load of New Image:     [ BPS 2000 Diagnostics ]

 ** or you can use the following in NNCLI in config mode:
download address 128.143.22.48 diag bps2k252.diag

Step #3: load 450 diagnose file. Yes, it's reverse of 450 upgrade.
     (don't need this if you are already using the FW1.48, or 4.2.0.16)

                    Software Download

    BPS 2000 Image Filename:       []
    BPS 2000 Diagnostics Filename:  []

    450 Image Filename:         [ b45042d01.img ]
    TFTP Server IP Address:       [ 128.143.22.48 ]
    Start TFTP Load of New Image:     [ 450 Image             ]

 ** or you can use the following in NNCLI in config mode:

 download address 128.143.22.48 b450-image b45042d01.img


Older Software Versions 2.5.0

****To DOWNGRADE 450 use files b45042c01.img and b45042c02.img
    To DOWNGRADE BPS use files bps2k250.img and bps2k250.diag
Here is what you should see after the downgrade.

 BPS: FW:2.5.0.3 SW:v2.5.0.40 ISVN:2
 450T: FW:V1.48 SW:v4.2.0.16

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:18
posted:9/6/2011
language:English
pages:5