Docstoc

Care of Natural Stone

Document Sample
Care of Natural Stone Powered By Docstoc
					     CARE & MAINTENANCE
      FOR NATURAL STONE
Tile Choice stocks a wide range of care and
maintenance products from Lithofin, one of the
worlds leading manufacturers and suppliers of
aftercare products.

Ceramic and Porcelain Tiles require regular
cleaning to maintain their pristine appearance.
Tile Choice stocks a range of cleaning products
to suit everyday cleaning through to the most
demanding of situations.

Natural Stone requires preparation prior to installation
and care and attention once the stone has been
fixed. Tile Choice has the products available from
stock to ensure that your Natural Stone maintains
its original beauty.

It is very important to use the correct maintenance
and cleaning products to care for your floor.
Your floor is a porous material and should be
protected against moisture and dirt which can stain
your floor.



                                                           Sealing:
                                                           Before sealing takes place the area should be inspected for
                                                           adhesive residues and general dirt deposits. The areas must be
                                                           perfectly clean and dry before applying sealant as any dirt or other
                                                           deposits may interfere with the sealing process and become more
                                                           permanent. It is recommended that all areas that require sealing
                                                           are cleaned. There are a few different products that will protect
                                                           stone. Each has its own characteristics and has been designed to
                                                           give a required finish or to be used with a specific stone.

                                                           Grouting:
                                                           For all natural stone, Granfix Floor Tile Grout is recommended.
                                                           Flexible admixtures should be used in the correct proportions
                                                           where appropriate. Follow the manufacturers instructions,
                                                           remembering that polished finishes can be scratched by hard or
                                                           abrasive objects. The grout should be applied over the whole
                                                           area ensuring that the joints are completely filled. Remove
                                                           excess grout with a damp sponge, making sure that it is rinsed
                                                           out frequently with clean water.

                                                           Maintenance:
                                                           The following products are available to keep natural stone looking
                                                           at its best. Many of the products are used for more than one type
                                                           of stone; however, it is important to use the right product that
                                                           applies to your material.
LITHOFIN MN COBBLE WAX

                             For finishing treatment of antique marble floors with sandblasted or similarly processed surface.
                             Also suitable for later care of waxed antique marble surfaces. Creates hardwearing film, creates a
                             richly coloured, shiny appearance, makes the surface less sensitive and simplifies maintenance.

                             • READY FOR USE                                    • EASY TO POLISH
                             • FOR INDOOR USE ONLY                              • CONTAINS SOLVENTS, CFC-FREE
                             • COVERAGE: APPROX. 20M2/L                         • PACKAGING: 500ML, 1L, 5L




Description                                                                    Further Treatment
A special product from the LITHOFIN-Range for marble and natural stone         Further care of the antique marble surface treated should be done
(MN). It is a ready-to-use wax system in paste form and contains natural       with Lithofin MN Easy Care Cleaner, which should always be used with
and synthetic wax raw materials, which form a hard-wearing film.               washing water. If the surface become matt or dull freshen up with Lithofin
                                                                               MN Care-Sheen or re-wax with Lithofin MN Cobble Wax.
Properties
Lithofin MN Cobble Wax is a solid paste, which is easy to apply and spread.    Storage
It forms a surface wax layer, which can be polished when dry, and gives        Closed, cool and dry. Shelf life of approx. 2 years.
the background a coloursaturated, silky shine appearance. The surfaces
are also less sensitive, easier to maintain and are made more attractive.      Environmental Protection
                                                                               Contains solvents, free of chlorinated hydrocarbons. Disposal:
Technical Data                                                                 liquid product is classified as special waste. Containers are made of
Density: 0.80 g/m2                                                             environmentally friendly tin plate. Clean containers can be recycled through
pH-Value: n/a                                                                  collection systems.
Flashpoint: approx. 39°C (c.C)
Appearance: yellow-beige, solid                                                Safety
Odour: aromatic                                                                Contents: natural and synthetic waxes, resins, hydrocarbons. Risk and
                                                                               Safety Phrases: labelling: N, dangerous for the environment.
Field of Use                                                                   Flammable. Toxic to aquatic organisms, may cause longterm adverse
For final treatment of floors in antique cobbled marble with sand-blasted,     effects in the aquatic environment.
acid or similarly treated surface. To improve resistance to stains the         Repeated exposure may cause skin dryness or cracking. Vapours may
surfaces may also be pre-treated with Lithofin MN Stainstop. Treatment         cause drowsiness and dizziness.
results in a strong-colour, antique effect appearance. Lithofin MN Cobble      First Aid Procedures: remove contaminated soaked clothing immediately.
Wax is also used for maintaining already waxed surfaces. It is not suitable    No special measure necessary. In case of contact with skin wash off
for polished or sealed surfaces, or for external use.                          immediately with soap and water. In case of contact with eyes rinse
                                                                               thoroughly with plenty of water and seek medical advice. In case of
Surface Requirements                                                           ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
The surface must be completely dry, clean, free of stains and absorbent.       water and seek medical treatment.
Cement films can be removed with Lithofin CEMENT-AWAY or Lithofin MN           Emergency Procedures: in case of spill or other release, take up with
Builder’s Clean. The roughing up or opening of pores which occurs              absorbent material (e.g. sand, sawdust, general-purpose binder).
because of this makes it easier for the wax to penetrate. Any powdery lime     In case of fire formation of dangerous gases possible.
deposits can if necessary be removed mechanically with a hard pad.             Product does not burn, fire-extinguishing activities according to
Pre-treatment with Lithofin MN Stain-Stop is possible, to improve              surrounding.
resistance to stains. In this case apply Lithofin MN Cobble Wax
immediately after about 1-2 hours drying time. The temperature of the          ADR2003:
surface must not be below 12oC.                                                not a dangerous good.

Directions for Use                                                             Packaging
We strongly recommend applying a sample surface. This shows what the           1 litre tin with child-proof cap (10 per box)
result will be, and gives information on how much to apply, drying time etc.   5 litre bucket (2 per box)
Lithofin MN Cobble Wax is ready to use and can be worked directly out of
the tin. Particularly with more impervious surfaces, it should be warmed       This information should be considered to be informal and non-binding.
up in a waterbath to liquefy it more. The fluid, warm wax will penetrate       The products must be used according to local conditions and materials.
more deeply and give greater deepening of colour. Apply evenly and             Where no previous experience is available, or in cases of doubt, test the
thinly, spread and rub in with a fluff-free cloth. You may need to apply       product in an inconspicuous area. (GB8.00gps)
treatment twice with strongly absorbent, porous backgrounds. Polish with
a brush or polishing pad when dry.
Drying time: approx. 2 hours to polishing, can have things put on it after
about 12 hours. Where larger amounts are applied, extend the drying time
to about 24 hours.
Coverage: For first treatment about 20 m2/litre depending on type of
surface, about 40 m2/litre when re-waxing.


                                                                                                                               0800 1 560 560
LITHOFIN CEMENT-AWAY

                             Removes heavy cement film, mortar residues, several blooms, stubborn atmospheric dirt layers etc.
                             on building sites and outdoor areas. Can also be used on old natural and artificial concrete stone,
                             clinker, ceramics surfaces (not suitable for polished marble, limestone, etc.).

                             • CONCENTRATE                                                  • EXTRA STRONG
                             • HIGHLY ACTIVE                                                • CONTAINS ACID
                             • COVERAGE: APPROX. 30-50M2/L                                  • PACKAGING: 1L, 5L




In order to remove cement and mortar residues, acidic cleaners are              Storage
required. Simply “covering” these residues with oil or wax based products       Keep closed and cool. Shelf life of up to five years.
is not a real solution because the residues will reappear on the surface.
Restoring such surfaces then becomes a complex task.                            Environmental Protection
                                                                                The contained surfactants are biologically degradable according to
Description                                                                     EU-regulations. The acids are largely neutralized in the cleaning process.
Lithofin CEMENT-AWAY is based on a composition of special acids and             Disposal: diluted product may be added to waste water. Containers are
cleaning components. This time-tested combination has proven to be the          made of environmentally friendly polyetylene (PE). Clean containers can be
ideal product for many cleaning requirements of the professional user.          recycled through collection system.

Technical Data:                                                                 Safety
Density: 1,12 g/cm2                                                             Contents: non-ionic surfactants; acids; auxiliary agents.
pH-Value: <1 (concentrate)                                                      Risk and Safety Phrases: causes burns. Irritating to respiratory system.
Appearance: clear, yellowish                                                    Keep locked up and out of the reach of children. Do not breathe vapour.
Odour: almond-like                                                              Wear suitable protective clothing, gloves and eye/face protection. In case
Solubility in Water: very good                                                  of accident or if you feel unwell, seek medical advice immediately (show
                                                                                the label where possible). Use only in well-ventilated areas.
Properties                                                                      First Aid Procedures: remove contaminated soaked clothing immediately.
Lithofin CEMENT-AWAY effortlessly removes surface residues such as              In case of inhalation, ensure of fresh air. In the event of symptoms refer for
mortar and cement, efflorescences, encrusted and engrained dirt, rust as        medical treatment. In case of contact with skin wash off immediately with
well as calcium and limescale deposits.                                         soap and water. In case of contact with eyes rinse thoroughly with plenty
                                                                                of water and seek medical advice. In case of ingestion, do not induce
Field of Use                                                                    vomiting. If swallowed by mistake drink plenty of water and seek medical
Universally usable after tile laying, in natural stone workshops, for           treatment.
cleaning facades and wherever else ceramic tiles, natural and engineered        Emergency Procedures: in case of spill or other release, take up with
stone must be thoroughly cleaned.                                               absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
Lithofin CEMENT-AWAY is preferably used outdoors and at the installation        adequate ventilation. Product does not burn, fire-extinguishing activities
site during construction.                                                       according to surrounding.
Surfaces: suitable for all acid resistant surfaces such as ceramic tiles,
brick, clay and quarry tiles, terracotta, engineered stone, concrete and        ADR2003:
many natural stones.                                                            corrosive liquid, n.o.s.
Please Note: not suitable for polished and finely honed limestone               UN 1760, Class 8
(e.g. marble) and engineered stone. Iron containing natural stones such as      Packaging Group III
serizzo can develop yellow discolouration (rust) and should therefore
rather be treated with Lithofin MN Builder’s Clean to avoid this effect.        Packaging
For indoor use, we recommend Lithofin KF Cement Residue Remover for             1 litre bottle with child-proof cap (10 per box)
ceramics and Lithofin MN Builder’s Clean for natural stones.                    5 litre canister (2 per box)

Directions for Use                                                              Please Note: statements concerning environmental and safety issues refer
Dilute Lithofin CEMENT-AWAY up to 1:20 with water and apply it to the           to the product as delivered (concentrated). This information should be
wet surface. Allow the product to work briefly, then rinse with plenty of       considered to be informal and non-binding. The products must be used
clear water.                                                                    according to local conditions and materials. Where no previous experience
Please Note: always test the product in an inconspicuous area prior to use.     is available, or in cases of doubt, test the product in an inconspicuous area.
Lithofin CEMENT-AWAY is not suitable for surfaces acid sensitive surfaces       (GB11.04gps/11.02)
such as enamel, zinc, chrome, stainless steel, polished marble and
limestone, certain decorative tiles, lacquer, etc. Sensitive materials can be
damaged by vapours. Ensure good ventilation during and after use, and
ensure that no vapours remain in the room.
Coverage: approx. 10 to 30m2 depending on the kind and
stubbornness of the deposits.



                                                                                                                              0800 1 560 560
LITHOFIN TERRACOTTA IMPREGNATOR

                              1st step of the MODERN method: Pre-impregnation for increased protection against oil and grease.
                              Applied immediately before final treatment with Lithofin Cotto Wax-Finish.

                              • EASY TO APPLY                                       • READY FOR USE
                              • SOLVENT-FREE                                        • WATER-BASED
                              • DRIES QUICKLY                                       • COVERAGE: UP TO 10M2/L
                              • PACKAGING: 1L, 5L




Description                                                                        Storage
A special product from the LITHOFIN-Range for terracotta and cotto (TC).           Keep closed and cool. Frost-free. Shelf life of up to two years.
Lithofin TC Impregnator is a ready-to-use, solvent free impregnator based
on water and oil repellent polymers and additives. This product is part of         Environmental Protection
the modern method for protective treatment of terracotta.                          Free of solvents.
                                                                                   Disposal: containers are made of environmentally friendly polyetylene (PE).
Technical Data:                                                                    Clean containers can be recycled through collection system.
Density: approx. 1,00 g/cm3
Appearance: liquid, clear                                                          Safety
Odour: nearly odourless                                                            Contents: polymers; auxiliary agents. General Information: keep out of the
pH-Value: approx. 4,5                                                              reach of children. Treated surfaces present no health hazard once dry. First
                                                                                   Aid Procedures: remove contaminated soaked clothing immediately.
Properties                                                                         In case of inhalation, ensure of fresh air. In case of contact with skin wash
Lithofin TC Impregnator penetrates into porous surfaces and forms a thin,          off immediately with soap and water. In case of contact with eyes rinse
invisible film inside the capillaries. This treatment prevents water, dirt and     thoroughly with plenty of water and seek medical advice. In case of
oil from sinking into the surface. Cleaning the surface is greatly simplified.     ingestion, do not induce vomitting. If swallowed by mistake drink plenty of
The surface’s permeability is only slightly reduced, the appearance of the         water and seek medical treatment. Emergency Procedures: in case of spill
surface is not altered, but it may turn slightly darker.                           or other
                                                                                   release, take up with absorbent material (e.g. sand, sawdust, general
Field of Use                                                                       purpose binder). Ensure adequate ventilation. Product does not burn,
1. before grouting: for facilitating removing grouting material from porous        fire-extinguishing activities according to surrounding. In case of fire
surfaces.                                                                          formation of dangerous gases possible.
2. for protecting cotto, terracotta, clay slabs, terres quites, etc. against the
penetration of oil, grease, dirt and water. First step of the modern method        ADR2003:
for treating terracotta and cotto.                                                 not a dangerous good
Please Note: pre-treated and glazed surfaces can no be impregnated. In
cases of doubt try the product prior to use.                                       Packaging
                                                                                   1 litre bottle with child-proof cap (10 per box)
Directions for Use
1. as grouting aid: dilute Lithofin TC Impregnator approx. 1:3 up to 1:5           Please Note: statements concerning environmental and safety issues refer
depending on the absorbency of the surface. Evenly apply to the dry                to the product as delivered (concentrated). This information should be
surface. Allow the product to dry for approx. two hours before grouting.           considered to be informal and non-binding. The products must be used
2. as protective treatment: evenly and generously apply Lithofin TC                according to local conditions and materials. Where no
Impregnator undiluted to the clean and dry surface using a lambs wool              previous experience is available, or in cases of doubt, test the product in an
wiper or sponge. On very absorbent surfaces, repeat the application after          inconspicuous area. (GB11.04gps/8.03)
30 to 40 minutes. Avoid or immediately wipe over drips and puddles.
Application Temperature: the temperature of the surface should be
between 5°C and 25°C. Switch off under floor heating.
Drying Time: approx. one hour depending on the room temperature. The
finishing treatment with Lithofin Sealant should be commenced directly
after drying.
Please Note: remove product residues with a nonlinting cloth. Do not allow
product to dry on the surface. Always treat the entire surface. During
treatment, the surface may appear patchy. This effect will disappear after
the product has dried. Avoid or immediately remove splashes on wood,
glass, plastics, varnish, silicone joints and other sensitive
surfaces.
Coverage: approx. 5 to 10m2 per litre on soft clay slabs and terracotta,
approx. 10 to 15m2 per litre on Italian cotto.




                                                                                                                                 0800 1 560 560
LITHOFIN TERRACOTTA SEALANT

                             2nd step of the MODERN method: For treatment of surfaces which have been pre-treated with Lithofin
                             Terracotta Impregnator. Can also be used for treatment of materials which have already been
                             impregnated by the manufacturer. Produces a naturally bright, neutral appearance.

                             • EASY TO APPLY                                                • SELF-GLOSSING
                             • SOLVENT-FREE, WATER-BASED                                    • COVERAGE: UP TO 10M2/L
                             • PACKAGING: 1L, 5L




Description                                                                     Storage
A special product from the LITHOFIN-Range for terracotta and cotto (TC).        Keep closed and cool. Frost-free. Shelf life of up to three years.
Lithofin TC Sealant is a ready-to-use, solvent free sealer containing natural
waxes and high quality additives. This product is part of the modern            Environmental Protection
method for protective treatment of terracotta.                                  The contained surfactants are biologically degradable according to
                                                                                EU-regulations. Free of phosphates.
Technical Data:                                                                 Disposal: diluted product may be added to waste water. Containers are
Density: approx. 1,00 g/cm2                                                     made of environmentally friendly polyetylene (PE). Clean containers can be
Appearance: liquid, white                                                       recycled through collection system.
Odour: nearly odourless
pH-Value: n.a.                                                                  Safety
Solubility in Water: good, complete                                             Contents: anionic surfactants; acrylates; natural waxes; auxiliary agents.
                                                                                General Information: keep out of the reach of children. Treated surfaces
Properties                                                                      present no health hazard once dry.
Lithofin TC Sealant forms a shining protective film, which prevents dirt        First Aid Procedures: remove contaminated soaked clothing immediately.
from penetrating into the surface. Maintenance becomes easier because           In case of inhalation, ensure of fresh air. In case of contact with skin wash
the product also reduces the roughness of the surface. The surface’s            off immediately with soap and water. In case of contact with eyes rinse
appearance is improved while maintaining its natural brightness. The            thoroughly with plenty of water and seek medical advice. In case of
protective film is hard wearing, UV-resistant and does not yellow.              ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
                                                                                water and seek medical treatment.
Field of Use                                                                    Emergency Procedures: in case of spill or other release, take up with
For protecting and embellishing indoor surfaces made from cotto,                absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
terracotta, clay slabs, terres quites, etc. Also suitable for pre-treated       adequate ventilation. Product does not burn, fire-extinguishing
terracotta tiles.                                                               activities according to surrounding.
Please Note: pre-treating untreated and absorbent surfaces with Lithofin
TC Impregnator improves the protective effect and makes the surface             ADR2003:
appear brighter.                                                                not a dangerous good

Directions for Use                                                              Packaging
The surface to be treated must be clean and completely dry. Evenly and          1 litre bottle with child-proof cap (10 per box)
generously apply Lithofin TC Sealant with a sponge or non-linting wiper.
The product can also be sprayed on the surface and then immediately             Please Note: statements concerning environmental and safety issues refer
distributed with a sponge. After a drying time of approx. 40 to 60 minutes,     to the product as delivered (concentrated). This information should be
apply a second coat. Avoid drips and puddles and ensure that the product        considered to be informal and non-binding. The products must be used
is evenly distributed on the surface. On highly absorbent surface, a third      according to local conditions and materials. Where no previous experience
coat may be necessary. On pre-treated and waxed surfaces, apply slightly        is available, or in cases of doubt, test the product in an inconspicuous area.
less product. Clean all tools with water.                                       (GB7.05gps/8.03)
Please Note: Do not walk on the surface while it is not completely dry.
Always treat the entire surface. Avoid or immediately remove splashes on
wood, glass, varnish and other sensitive surfaces.
Application Temperature: the temperature of the surface should be
between 5°C and 25°C. Switch off under floor heating.
Coverage: approx. 5 to 10m2 per litre on soft clay slabs (two coats);
approx. 10 to 15m2 per litre on Italian cotto (two coats); approx. 10 to 15m2
per litre on pre-treated and waxed surfaces.
Advice: for regular maintenance cleaning, we recommend Lithofin
EASY-CARE. When necessary, use one cup of Lithofin TC Sealant per 10
litre bucket of water to touch up the protective film.




                                                                                                                              0800 1 560 560
LITHOFIN TERRACOTTA CLASSIC PRIMER

                             1st step of the CLASSIC method: works as a base before the final treatment. Determines the later
                             colour shade of the finish, and makes even application of Lithofin Classic Wax easier.

                             • COLOUR: ANTIQUE                                   • READY TO USE
                             • CONTAINS SOLVENTS                                 • DRIES QUICKLY
                             • COVERAGE: UP TO 10M2/L                            • PACKAGING: 1L, 5L




Description                                                                     Safety
A special produc from the LITHOFIN-Range for terracotta (TC).                   Contents: acrylates; silicones; aliphatic polymers; auxiliary agents.
The ready-to-use primer contains silocon- and acrylate resins carried in        Risk and Safety Phrases: labelling: Xn, harmful. May cause cancer.
organic solvents.                                                               Irritating to eyes and skin. Harmful to aquatic organisms, may cause
                                                                                long-term adverse effects in the aquatic environment. Vapours may cause
Properties                                                                      drowsiness and dizziness. Keep out of the reach of children. Do not breathe
Penetrates into porous surfaces and reduces their absorbency. This              vapour. Avoid contact with skin. If swallowed, seek medical advice
treatment renders the surface water repellent and is the precondition for       immediately and show this container or label.
treatment with Lithofin TC Classic Wax.                                         First Aid Procedures: remove contaminated soaked clothing immediately.
                                                                                In case of inhalation, move victim to open area. In the event of symptoms
Technical Data:                                                                 refer for medical treatment. In case of contact with skin wash
Density: approx. 0.8 g/cm3                                                      off immediately with soap and water. In case of contact with eyes rinse
pH-Value: n.a.                                                                  thoroughly with plenty of water and seek medical advice. In case of
Flash Point: > 23°C (c.C.)                                                      ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
Appearance: liquid, clear                                                       water and seek medical treatment.
Odour: aromatic                                                                 Emergency Procedures: in case of spill or other release, take up with
Solubility in Water: not soluble                                                absorbent material (e.g. sand, sawdust, general-purpose binder). In case of
                                                                                fire formation of dangerous gases possible. Suitable extinguishing
Field of Use                                                                    material: foam, dry powder, carbon dioxide, sand.
For priming absorbent terracotta and cotto surfaces, especially Italian
cotto. This treatment is the first step of the so called "classic" method for   ADR2003:
treating terracotta. This treatment is not suitable for nonabsorbent            labelling: UN1993. Additional comments on freight papers: non, limited
surfaces and for outdoor use.                                                   quantity.

Directions for Use                                                              Packaging
The surface to be treated must be completely dry and clean. Shake               1 litre bottle with child-proof cap (10 per box)
well before use. Try the product in an inconspicuous area in order to           5 litre canister (2 per box)
evaluate the effect. Evenly apply the undiluted product with a brush or an
applicator, avoid streaks and puddles. Even out the coat with a cloth or        This information should be considered to be informal and non-binding.
nylon pad before drying. Start treatment with Lithofin TC Classic Wax           The products must be used according to local conditions and materials.
immediately after drying (20 to 60 minutes).                                    Where no previous experience is available, or in cases of doubt, test the
Please Note: apply the product only after the silcone joints have been fixed.   product in an inconspicuous area. (GB1.06gps/8.03)
Application Temperature: between 10°C and 25°C, turn of underfloor
heating.
Drying Time: approx. 60 minutes.
Coverage: approx. 5 to 10m2 depending on the porousity of the surface.
Further Treatment Lithofin TC Classic Wax. Both products belong together
in a system known as the "classic" method.

Storage
Closed, cool and dry. Shelf life of up to 2 years. Open containers should be
used quickly.

Environmental Protection
Contains solvents, free of chlorinated hydrocarbons.
Disposal: liquid product is classified as special waste. Containers are made
of environmentally friendly tin plate. Clean containers can be recycled
through collection systems.




                                                                                                                              0800 1 560 560
LITHOFIN TERRACOTTA CLASSIC WAX

                                  2nd step of the CLASSIC method: For final treatment of primed surfaces. Forms an easy to
                                  polish, wear-resistant wax layer, which helps the patina develop. Can be used for future touch-up
                                  work.

                                  • COLOUR: COLOURLESS OR ANTIQUE                                • READY TO USE
                                  • PASTE FORM, EASY TO APPLY                                    • DRIES QUICKLY
                                  • CONTAINS SOLVENTS                                            • COVERAGE: UP TO 10M2/L
                                  • PACKAGING: 1L, 5L




Description                                                                    Safety
A special product from the LITHOFIN-Range for terracotta (TC). This            No health concerns once dry. Ensure adequate ventilation during and after
ready-to-use, colourless paste contains high quality natural and synthetic     use. Do not apply in rooms where food is stored.
waxes.                                                                         Contents: natural and synthetic waxes, aliphatic polymers, auxilliary
                                                                               agents.
Properties                                                                     Risk and Safety Phrases: Flammable. Toxic to aquatic organisms, may
Lithofin TC Classic Wax is easy to apply and distribute. The product forms     cause long-term adverse effects in the aquatic environment. Vapours may
a wax layer that can be polished to produce the typical (traditional)          cause drowsiness and dizziness. Keep out of the reach of children. Do not
terracotta look.                                                               breathe vapour. Avoid contact with skin. If swallowed, seek medical advice
                                                                               immediately and show this container or label.
Technical Data:                                                                First Aid Procedures: remove contaminated soaked clothing immediately.
Density: approx. 0.8 g/cm3                                                     In case of inhalation, move victim to open area. In the event of symptoms
pH-Value: n.a.                                                                 refer for medical treatment. In case of contact with skin wash
Flash Point: > 23°C                                                            off immediately with soap and water. In case of contact with eyes rinse
Appearance: yellowish white, pasty                                             thoroughly with plenty of water and seek medical advice. In case of
Odour: aromatic                                                                ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
Solubility in Water: not soluble                                               water and seek medical treatment.
                                                                               Emergency Procedures: in case of spill or other release, take up with
Field of Use                                                                   absorbent material (e.g. sand, sawdust, general-purpose binder). In case
For final treatment of terracotta floors that have been pre-treated with       of fire formation of dangerous gases possible. Suitable extinguishing
Lithofin TC Classic Primer (please refer to Technical Information 141- for     material: foam, dry powder, carbon dioxide, sand.
further information).
Waxing the surface is the second step of the so called "classical" method      ADR2003:
of treating terracotta. The treatment strengthens the colours and leaves an    not a dangerous good.
ellegant sheen. Lithofin TC Classic Wax is also suitable for touching up
waxed surfaces. The product is not suitable for glazed tiles, highly           Packaging
absorbent surfaces and outdoor use.                                            1 litre bottle (10 per box)
                                                                               5 litre bucket (2 per box)
Directions for Use
Stir before use. Approx. 60 minutes after applying Lithofin TC Classic         This information should be considered to be informal and non-binding. The
Primer, apply Lithofin TC Classic Wax to the surface with a cloth or a nylon   products must be used according to local conditions and materials. Where
pad and work into the surface. Pre-polish after approx. 10 minutes,            no previous experience is available, or in cases of doubt, test the product
preferably using a polishing machine. After approx. 60 minutes, the            in an inconspicuous area. (GB1.06gps/8.03)
surface has dried enough for the final polish (using a brush, pad or felt).
Do not walk on the surface for 12 hours. When touching up a used surface,
apply thinly and polish after approx. 10 minutes.
Please Note: on very lightly absorbent surfaces, a pretreatment may not be
necessary. Try in an inconspicuous area.
Drying Time: approx. 60 minutes until polishing, fully cured after 12 hours.
Coverage: approx. 20m2 per litre depending on absorbency, up to 50m2
when touching up old surfaces.

Storage
Closed, cool and dry. Shelf life of approx. 3 years. Environmental
Protection Contains solvents, free of chlorinated hydrocarbons.
Disposal: liquid product is classified as special waste. Containers are made
of environmentally friendly tin plate. Clean containers can be recycled
through collection systems.




                                                                                                                           0800 1 560 560
LITHOFIN MN COLOUR INTENSIFIER

                                  Improves the appearance of rough, absorbent natural and artificial stone surfaces. Invigorates the
                                  colours and accentuates the structure, makes water and dirt repellent.

                                  • READY FOR USE                                               • FOR INDOOR AND OUTDOOR USE
                                  • NO GLOSS                                                    • CONTAINS SOLVENTS
                                  • CAN BE APPLIED IN SEVERAL COATS                             • IDEAL FOR CONCRETE SLABS
                                  • COVERAGE: APPROX. 7-15M2/L                                  • PACKAGING: 1L, 5L




Description
A special product from the LITHOFIN-Range for marble, natural and              Drying Time: safe to walk on after approx. 30 minutes, completely dry after
engineered stone (MN). This ready-to-use siloxane impregnator is solvent       24 hours. Coverage: approx. 10m2 per litre depending on the surface.
based and contains special colour intensifying components.
                                                                               Storage
Technical Data:                                                                Keep closed, cool and dry. Shelf life of up to four years. Open containers
Density: approx. 0,85 g/cm2                                                    should be used quickly. Environmental Protection Contains solvents, free
Appearance: liquid, colourless, clear                                          of chlorinated hydrocarbons.
Odour: aromatic                                                                Disposal: liquid product is classified as special waste. Containers are made
pH-Value: n.a.                                                                 of environmentally friendly tin plate. Clean containers can be recycled
Flash Point: >25°C                                                             through collection systems.
Solubility in Water: not soluble
                                                                               Safety
Properties                                                                     Contents: hydrocarbons; siloxane polymers; auxilliary agents.
Lithofin MN Colour Intensifier penetrates into the surface rendering it        Risk and Safety Phrases: flammable. Harmful by inhalatio and in contact
water repellent while at the same time intensifying the colour without         with skin. Irritating to respiratory system. Toxic to aquatic organisms, may
producing any gloss. Surfaces appear more colourfull and fresh – wet           cause long-term adverse effects in the aquatic environment. Harmful: may
effect. The water resistance reduces the sensitivity of the surface, largely   cause lung damage if swallowed. Repeated exposure may cause skin
preventing staining and facilitating maintenance. Lithofin MN Colour           dryness or cracking. Keep out of the reach of children. Do not breathe
Intensifier does not form any layers, thereby maintaining the surfaces         vapour. Avoid contact with skin. If swallowed, do not induce vomiting: seek
water permeability. The slip resistance of the surface is hardly affected.     medical advice immediately and show this container or label.
Durability: indoors and with correct maintenance nearly unlimited.             First Aid Procedures: remove contaminated soaked clothing immediately.
Outdoors, depending on the type of stone, the colour will remain for           In case of inhalation, ensure of fresh air. In the
approx. 1 to 2 years, the protective effect for approx. 5 to 7 years. Can be   event of symptoms refer for medical treatment. In case of contact with skin
reapplied when the effect fades.                                               wash off immediately with soap and water. In case of contact with eyes
                                                                               rinse thoroughly with plenty of water and seek medical advice. In case of
Field of Use                                                                   ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
For adding lustre to wall and floor surfaces, stairs, entrance areas,          water and seek medical treatment.
terraces, etc. which appear bland and colourless. Suitable for indoor and      Emergency Procedures: in case of spill or other release, take up with
outdoor use.                                                                   absorbent material (e.g. sand, sawdust, general-purpose binder). In case of
Surfaces: all absorbent, porous natural stones (e.g. granite, gneiss,          fire formation of dangerous gases possible. Suitable extinguishing materi-
porphyr, marble, limestone, slate, etc.) and engineered stones with rough,     al: foam, dry powder, carbon dioxide, sand.
sawn, honed and flamed surfaces.
Please Note: for protecting polished and very finely honed natural and         ADR2003:
artificial stones, we recommend Lithofin STAINSTOP >W<, Lithofin MN            flammable liquid, n.o.s. UN 1993, Class 3 Packaging Group III
Stain-Stop or Lithofin SPLAS-STOP.
                                                                               Packaging
Directions for Use                                                             1 litre bottle with child-proof cap (10 per box)
The surface to be treated must be completely dry and clean. Where no           5 litre canister (2 per box)
prior experience exists or in cases of doubt, try the product in an
inconspicuous area prior to use. Evenly apply a consistent amount of           This information should be considered to be informal and non-binding.
Lithofin MN Colour Intensifier with a brush, a roller or a cloth. On highly    The products must be used according to local conditions and materials.
absorbent surfaces, this procedure may have to be repeated after five          Where no previous experience is available, or in cases of doubt, test the
minutes. Do not allow the surface residues to dry. Residues must be            product in an inconspicuous area. (GB11.04gps/3.03)
completely removed within ten minutes with a cloth. On large surfaces,
remove the residues with a squeegee and polish with a white pad.
Attention! treat only completely dry surfaces (drying time for newly laid
surfaces up to 8 weeks, otherwise several days). Non-absorbent surfaces
such as polished or fired materials such as porcelain or ceramic tiles can
not be treated. Glass, wood, plastics and other surfaces sensitive to
solvents must be protected against splashes. Application Temperature: the
temperature of the surface should be between 5°C and 25°C. Switch off
under floor heating.

                                                                                                                             0800 1 560 560
LITHOFIN MN EASY-CARE CLEANER

                                  Specifically designed for continuous care of all types of stone surfaces. Cleans and maintains the
                                  surface when wiped. Coarse and polished surfaces become increasingly beautiful and richer in
                                  colour and structure with regular use. Ideal for impregnated or sealed surfaces.

                                  • CONCENTRATE                                      • VERY HIGH YIELD
                                  • NOT LAYER FORMING                                • NON-BLEACHING
                                  • SOLVENT FREE                                     • PACKAGING: 1L, 5L

                                  • COVERAGE: USE ONE SQUIRT (CA. 20ML) PER 10L BUCKET OF WATER.


Description                                                                   Safety
A special product from the LITHOFIN-Range for marble, natural and             Contents: anionic surfactants; auxilliary agents. General Information: keep
engineered stone (MN). Lithofin MN Easy Care Cleaner is a high-yielding       out of reach of children. No health concerns once dry.
cleaning and maintenance concentrate, which contains active maintenance       First Aid Procedures: remove contaminated soaked clothing immediately.
components and mildly alkaline cleaning agents based on natural soaps.        No special measure necessary. In case of contact with skin wash off
                                                                              immediately with soap and water. In case of contact with eyes rinse
Technical Data:                                                               thoroughly with plenty of water and seek medical advice. In case of
Density: 1,0 g/cm2                                                            ingestion, do not induce vomitting. If swallowed by mistake drink plenty of
pH-Value: approx. 10 (concentrate)                                            water and seek medical treatment.
Appearance: viscous, yellowish                                                Emergency Procedures: in case of spill or other release, take up with
Odour: pleasant                                                               absorbent material (e.g. sand, sawdust, general-purpose binder).
Solubility in Water: complete                                                 In case of fire formation of dangerous gases possible. Product does not
                                                                              burn, fire-extinguishing activities according to surrounding.
Properties
Highly effective agents take up the dirt and so it can easily be removed by   ADR2003:
wiping. The remaining extremely thin care film is free of wax and does not    not a dangerous good.
build any layers. With continued use, the surface’s appearance will improve
in colour and structure. Lithofin MN Easy Care Cleaner leaves a pleasant      Packaging
odour.                                                                        500ml bottle with child-proof cap (10 per box)
                                                                              1 litre bottle with child-proof cap (10 per box)
Field of Use                                                                  5 litre canister (2 per box)
For regular maintenance cleaning of all marble and natural stone surfaces.
Surfaces: all natural stones such as carrara, travertine, jura marble,        Please Note: statements concerning environmental and safety issues refer
porphyr, serizzo, sandstone as well as engineered stone. The surfaces can     to the product as delivered (concentrated). This information should be
be polished, honed or rough, impregnated sealed or untreated.                 considered to be informal and non-binding. The products must be used
                                                                              according to local conditions and materials. Where no previous experience
Directions for Use                                                            is available, or in cases of doubt, test the product in an inconspicuous area.
Lithofin MN Easy Care Cleaner is always added to lukewarm water. One          (GB11.04gps/3.03)
squirt (approx. 20ml) per 10 litres of water. In case of absorbent, dirty
surfaces use a bit more. After wiping, allow the residues to dry on the
surface, do not rinse with clear water. Use either a floor mop, cloth or
cleaning machine for wiping
Coverage: Lithofin MN Easy Care Cleaner is a highyielding concentrate and
very economical. On large areas which are machine cleaned daily approx.
3 litres per 100m2 will be needed per month.
Advice: in areas subject to heavy wear and tear and on very dirty surfaces,
it may be necessary to occasionally use Lithofin MN Power-Clean. Further
Maintenance Natural stone floors should be wiped regularly. Especially on
polished marble, we recommend using Lithofin MN Easy Care Cleaner
three to four times, then using Lithofin MN Care-Sheen once.

Storage
Keep closed and cool. Not above 25°C. Shelf life of up to five years.

Environmental Protection
The contained surfactants are biologically degradable according to
EU-regulations. Does not contain any phosphates.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyetylene (PE). Clean containers can be
recycled through collection system.



                                                                                                                            0800 1 560 560
LITHOFIN TERRACOTTA EVER-SHEEN

                                  For occasional freshening up of gloss and wax protection. For surfaces treated with the CLASSIC
                                  method, encourages patina formation. Can be applied dissolved in washing water or undiluted.

                                  • CONCENTRATE                                       • SOLVENT-FREE
                                  • CONTAINS WAX                                      • CAN BE POLISHED

                                  • COVERAGE: APPROX. 20M2/L, UP TO 200M2 IF APPLIED DILUTED.
                                  • PACKAGING: 1L, 5L




Description                                                                    Safety
A special product from the LITHOFIN-Range for Terracotta (TC). Lithofin        Contents: non-ionic surfactants; acrylates; polymers; auxiliary agents.
TC Ever-Sheen is a solvent free protective care treatment based on water       General Information: Keep out of reach of children. No health concerns
soluble natural waxes and polymers.                                            once dry.
                                                                               First Aid Procedures: remove contaminated soaked clothing immediately.
Properties                                                                     No special measure necessary.In case of contact with skin wash off
Lithofin TC Ever-Sheen forms a shining protective film that enhances the       immediately with soap and water. In case of contact with eyes rinse
appearance, slightly intensifies the colour and reenforces the effectiveness   thoroughly with plenty of water and seek medical advice. In case of
of the original protective treatment. Surfaces become more vibrant in          ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
colour. Polishing will further increase the lustre.                            water and seek medical treatment.
                                                                               Emergency Procedures: in case of spill or other release, take up with
Technical Data                                                                 absorbent material (e.g. sand, sawdust, general-purpose binder). In case of
Density: approx. 1.0 g/cm3                                                     fire formation of dangerous gases possible. Product does not burn,
pH-Value: approx. 9                                                            fire-extinguishing activities according to surrounding.
Flash Point: n.a.
Appearance: milky                                                              ADR2003:
Odour: fresh                                                                   not a dangerous good.
Solubility in Water: very good
                                                                               Packaging
Field of Use                                                                   1 litre bottle with child-proof cap (10 per box)
For occasional touching up of waxed terracotta, cotto, terres cuites, etc.     5 litre canister (2 per box)
Only suitable for indoor use. Also suitable for pre-treated tiles.
Durability: depends on the level of wear to which the surface is subjected.    Please Note: statements concerning environmental and safety issues refer
Lithofin TC Ever-Sheen can be reapplied when the effectiveness begins to       to the product as delivered (concentrated). This information should be
diminish.                                                                      considered to be informal and non-binding. The products must be used
                                                                               according to local conditions and materials. Where no previous experience
Directions for Use                                                             is available, or in cases of doubt, test the product in an inconspicuous area.
Only apply to dry surfaces. For touching up, simply use Lithofin TC            (GB12.05gps/8.03)
Ever-Sheen (approx. 1/4 litre per 5 litres of water) instead of the regular
cleaning agent. On dull surfaces, apply undiluted using a sponge or a
lambs wool applicator. After drying, polish either by hand or using a
polishing machine. At least two coats are needed on untreated terracotta.
Allow the product to dry for 30 to 60 minutes between applications.
Please Note: do not walk on surface until dry.
Drying Time: 30 to 40 minutes.
Coverage: approx. 200 m2 per litre when used in cleaning water, approx.
20 m2 is used undiluted.

Storage
Closed, cool and frost free. Shelf life of up to 4 years. Advice Terracotta
should be cleaned regularaly. Lithofin EASY-CARE is highly suitable as an
additive to the washing water.

Environmental Protection
The contained surfactants are biologically degradable according to
EU-regulations. Does not contain any phosphates.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyetylene (PE). Clean containers can be
recycled through collection system.




                                                                                                                             0800 1 560 560
LITHOFIN KF GROUT CLEANER

                                  Restores joints of tile surfaces, walls and floors to their original colour. Removes grease, oil and
                                  dirt deposits from joints in kitchens and bathrooms, makes them hygienically clean and fresh.

                                  • HIGH YIELD                                        • ACTS INTENSIVELY
                                  • MILDLY ALKALINE                                   • COVERAGE: UP TO 3M2 /500ML
                                  • PACKAGING: 500ML




Description                                                                    Safety
A special product from the LITHOFIN-Range for ceramics, quarry tiles and       Contents: anionic surfactants (<5%), non-ionic surfactants (<5%), alkali,
porcelain (KF). This concentrated cleaner based on alkalines and does not      perfume, auxiliary agents. Risk and Safety Phrases: labelling: Xi, irritant.
contain any solvents. Active cleaning components are combined with             Irritating to eyes and skin. Keep out of the reach of children. In case of
grease and dirt dissolving auxilliary agents.                                  contact with eyes, rinse immediately with plenty of water and seek medical
                                                                               advice. If swallowed, seek medical advice immediately and show this
Properties                                                                     container or label.
Lithofin KF Grout Cleaner dissolved organic dirt, especially oil and grease.   First Aid Procedures: remove contaminated soaked clothing immediately.
After rinsing, the tiles and grout lines are hygenically clean.                In case of inhalation, ensure of fresh air. In the event of symptoms refer for
                                                                               medical treatment. In case of contact with skin wash off immediately with
Technical Data                                                                 soap and water. In case of contact with eyes rinse thoroughly with plenty
Density: approx. 1.0 g/cm2                                                     of water and seek medical advice. In case of ingestion, do not induce
pH-Value: approx. 12                                                           vomiting. If swallowed by mistake drink plenty of water and seek medical
Appearance: liquid, clear, brownish                                            treatment.
Odour: unspecified                                                             Emergency Procedures: in case of spill or other release, take up with
Solubility in Water: completely                                                absorbent material (e.g. sand, sawdust, general-purpose binder). Product
                                                                               does not burn, fire-extinguishing activities according to surrounding. Do
Field of Use                                                                   not use full water jet for safety reasons.
For restoring the original colour and appearance of groutlines, and for
thoroughly degreasing and cleaning grout in kitchens and bathrooms. Also       ADR2003:
suitable for cleaning baking trays, stoves, etc.                               labelling on transport boxes: UN1719.

Directions for Use                                                             Packaging
Put a squirt of Lithofin KF Grout Cleaner onto a moist sponge and apply to     500ml bottle with childproof cap (10 per box)
the surface to be cleaned. Allow to work for 10 to 15 minutes. In case of
very stubborn dirt, use neat and allow to work longer. Support the cleaner     Please Note: statements concerning environmental and safety issues refer
by brushing occasionally. Always rinse well with plenty of clear water.        to the product as delivered (concentrated). This information should be
Please Note: we highly recommend testing the product's suitability in an       considered to be informal and non-binding. The products must be used
inconspicuous area prior to use. Do not use on surfaces sensitive to           according to local conditions and materials. Where no previous experience
alkalines, such as polished marble, lacquered and varnished surfaces, etc.     is available, or in cases of doubt, test the product in an
Do not use on hot surfaces.                                                    inconspicuous area. (GB12.05gps/12.02)
Coverage: approx. 10m2 per litre.

Storage
Closed and cool. Do not store in temperatures above 25°C. Shelf life
approx. 3 years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyethylene (PE). Clean containers can
be recycled through collection systems.




                                                                                                                             0800 1 560 560
LITHOFIN KF GROUT PROTECTOR

                                  For joints in ceramic surfaces. Protects against greasy dirt and spots in kitchen and bathroom,
                                  and makes maintenance easier.

                                  • READY FOR USE                                     • INVISIBLE
                                  • LONG-TERM EFFECT                                  • CONTAINS NO SOLVENTS
                                  • COVERAGE: CA. 5M2/500ML                           • PACKAGING: 500ML




Description                                                                    Safety
A special product from the LITHOFIN-Range for ceramics, quarry tiles and       Contents: polymers; auxiliary agents. General Information: Keep out of the
porcelain (KF). Lithofin KF Grout Protector is a ready-to-use, solvent free    reach of children. Treated surfaces present no health hazard
special impregnator based on a combination of high quality water and oil       once dry.
repellent compounds.                                                           First Aid Procedures: Remove contaminated soaked clothing immediately.
                                                                               In case of inhalation, ensure of fresh air. In case of contact with skin wash
Technical Data                                                                 off immediately with soap and water. In case of contact with eyes rinse
Density: approx. 1,0 g/cm2                                                     thoroughly with plenty of water and seek medical advice. In case of
Appearance: liquid, clear                                                      ingestion, do not induce vomitting. If swallowed by mistake drink plenty of
Odour: unspecified                                                             water and seek medical treatment.
pH-Value: approx. 4,5                                                          Emergency Procedures: in case of spill or other release, take up with
Flash Point: n.a.                                                              absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
                                                                               adequate ventilation. Product does not burn, fire-extinguishing activities
Properties                                                                     according to surrounding.
Due to its low viscosity, Lithofin KF Grout Protector penetrates well into
porous surfaces. Once dry, the remaining active ingredients show a good        ADR2003:
water and an excellent oil repellent effect. Oil and other substances remain   not a dangerous good.
on the surface where they can easily be removed before they cause stains.
Removing greasy kitchen dirt becomes easier. The appearance on the             Packaging
surface is not altered; it may however become slightly darker.                 500ml bottle with child-proof cap (10 per box) This information should be
                                                                               considered to be informal and non-binding. The products must be used
Field of Use                                                                   according to local conditions and materials. Where no previous experience
For protecting absorbent, porous cement grouting especially in kitchens        is available, or in cases of doubt, test the product in an inconspicuous area.
and sanitary areas. Absorbent, non-glazed tiles can also be treated.           (GB11.04gps/11.02)

Directions for Use
The surface to be treated must be absorbent, clean and free of grease. Use
Lithofin KF Power-Clean for a deep cleaning of the surface. Evenly and
generously apply Lithofin KF Grout Protector undiluted to the dry surface
with a brush or roller. In case of highly absorbent cement grouting, repeat
the application several times. After approx. 20 minutes, carefully remove
all surface residues with a cloth. Do not allow the product to dry on the
surface.
Please Note: always try the product in an inconspicuous area prior to use.
Protect glass, porcelain, polished and varnished surfaces, plastics and
other sensitive surfaces against splashes.
Drying Time: approx. 2 hours. The impregnator will be fully effective after
48 hours, protect the surface against water, oil, etc. during this time.
Coverage: when treating grout joints: approx. 10m2 per 500ml.

Storage
Keep closed, cool and dry. Frost-free. Shelf life of up to two years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations. Free of solvents.
Disposal: containers are made of environmentally friendly polyethylene
(PE). Clean containers can be recycled through collection systems.




                                                                                                                             0800 1 560 560
LITHOFIN FZ INTENSIVE CLEANER

                                 For occasional thorough cleaning or for regular cleaning of floors subjected to heavy wear.
                                 Removes stubborn dirt, oil and grease. Suitable for all ceramic finishes.

                                 • CONCENTRATE                                       • EXTRA STRONG
                                 • ALKALINE                                          • SOLVENT-FREE

                                 • COVERAGE: 10-15M2/L AS THOROUGH BASE CLEANER,
                                  UP TO 100M2 FOR DILUTED APPLICATION.
                                 • PACKAGING: 1L, 5L


Description                                                                   Safety
A special product from the LITHOFIN-Range for fully vitrified ceramic and     Contents: non-ionic surfactants; sodium potassiumhydroxide; carbonates;
porcelain tiles (FZ). Lithofin FZ Intensive Cleaner is a strong alkaline      auxiliary agents. Risk and Safety Phrases: causes burns. Keep locked up
product based on highly active and biologically degradeable components.       and out of the reach of children. In case of contact with eyes, rinse
                                                                              immediately with plenty of water and seek medical advice. Wear suitable
Technical Data                                                                protective clothing, goves and eye/face protection. In case of accident or if
Density: approx. 1,1 g/cm2                                                    you feel unwell, seek medical advice immediately (show the label where
Appearance: liquid, yellowish                                                 possible).
Odour: pleasant                                                               First Aid Procedures: in case of inhalation ensure fresh air. In case of
pH-Value: >12                                                                 contact with skin wash off immediately with soap and water. In case of
Flash Point: >65°C                                                            contact with eyes rinse thoroughly with plenty of water and seek medical
Solubility in Water: --                                                       advice. Do not induce vomitting. If swallowed by mistake drink plenty of
                                                                              water and seek medical treatment.
Properties                                                                    Emergency Procedures: in case of spill or other release, take up with
Lithofin FZ Intensive Cleaner dissolves and removes stubborn engrained        absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
dirt, oil and grease, rubber, care product residues, etc.                     adequate ventilation. Product does not burn, fire-extinguishing activities
                                                                              according to surrounding.
Field of Use
For basic and thorough cleaning of surfaces where care with Lithofin FZ       ADR2003:
Conditioning Cleaner is not sufficient and for regular use on surfaces        caustic alkali liquid, n.o.s.
subject to heavy wear and tear. Suitable for all polished and unglazed        UN 1719, Class 8
porcelain tiles.                                                              Packaging Group III

Directions for Use                                                            Packaging
Dilute Lithofin FZ Intensive Cleaner up to 1:10 with cold or lukewarm water   1 litre bottle with child-proof cap (10 per box)
and distribute evenly on the surface with a brush or scrubber. Allow the      5 litre canister (2 per box)
product to work for 10 to 20 minutes, brushing occasionally and not
allowing the product to dry. Remove from the surface with a cloth or with     Please Note: statements concerning environmental and safety issues refer
a wet and dry vac and rinse the surface with clear water.                     to the product as delivered (concentrated). This information should be
Please Note: do not use on polished marble and other surfaces sensitive to    considered to be informal and non-binding. The products must be used
alkali. Always try the product in an inconspicuous area prior to use.         according to local conditions and materials. Where no previous experience
Coverage: as supplied: approx. 10 to 15m2 depending on dirt diluted: up to    is available, or in cases of doubt, test the product in an inconspicuous area.
200m2                                                                         (GB11.04gps/11.02)

Storage
Keep closed, cool and dry. Shelf life of up to five years. Environmental
Protection Surfactants are biologically degradeable in accordance with
EU-regulations.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyethylene (PE). Clean containers can
be recycled through collection systems.




                                                                                                                            0800 1 560 560
LITHOFIN KF TILE POLISH

                                   The ideal sealant for unglazed ceramic tiles, clinker and clay slabs. The glossy film freshens up
                                   the colours and makes care easier, especially for tiles with rough finishes. The occasionally need-
                                   ed touch-up is done by adding the product to cleaning water.

                                   • SELF-GLOSSING                                                • FREE OF SOLVENTS
                                   • FOR INDOOR USE ONLY                                          • SIMPLE TO APPLY

                                   • COVERAGE: ABOUT 20 M2/L UP TO 110 M2 IF APPLIED DILUTED
                                   • PACKAGING: 1L, 5L


Description                                                                      Safety
A special product from the LITHOFIN-Range for porcelain, ceramic and             Contents: non-ionic surfactants (<5%), polymers, auxiliary agents.
quarry tiles (KF). The solvent free acrylate sealant can be diluted with water   General Information: Keep out of reach of children. No health concerns
and is easy to use.                                                              once dry.
                                                                                 First Aid Procedures: remove contaminated soaked clothing immediately.
Properties                                                                       No special measure necessary. In case of contact with skin wash off
Once dry, Lithofin KF Tile Polish forms a film that gives dull, matt and         immediately with soap and water. In case of contact with eyes rinse
rough surfaces an ellegant sheen. Dirt will no longer penetrate into the         thoroughly with plenty of water and seek medical advice. In case of
surface and can easily be wiped away. Rough surfaces become smoother             ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
and therefore easier to maintain. The film protects the surface, while at the    water and seek medical treatment.
same time enhancing its appearance by slightly darkening the colours.            Emergency Procedures: in case of spill or other release, take up with
Existing marks of wear and tear are masked and become less visible.              absorbent material (e.g. sand, sawdust, general-purpose binder). In case of
                                                                                 fire formation of dangerous gases possible. Product does not burn,
Technical Data                                                                   fire-extinguishing activities according to surrounding.
Density: approx. 1.0 g/cm2
pH-Value: approx. 9                                                              ADR2003:
Appearance: milky-white                                                          not a dangerous good.
Odour: nearly odourless
                                                                                 Packaging
Field of Use                                                                     1 litre bottle with child-proof cap (10 per box)
Lithofin KF Tile Polish has been specifically developed for ceramic              5 litre canister (2 per box)
surfaces, such as unglazed, quarry and clay tiles. The surface film
enhances the appearance and facilitates maintenance. Lithofin KF Tile            Please Note: statements concerning environmental and safety issues refer
Polish is not recommended for outdoor areas and for surfaces subject to          to the product as delivered (concentrated). This information should be
heavy wear and tear. Not suitable for glazed and polished tiles.                 considered to be informal and non-binding. The products must be used
                                                                                 according to local conditions and materials. Where no previous experience
Directions for Use                                                               is available, or in cases of doubt, test the product in an inconspicuous area.
The surface must be clean and completely dry. Remove dirt deposits and           (GB12.05gps/4.03)
old care product residues with the suitable LITHOFIN cleaner. Evenly apply
Lithofin KF Tile Polish in undiluted form using an applicator, sponge or lint
free cloth. The product may be used diluted with water, if the surface is
not very absorbent. The amount of product to be applied depends on the
absorbency of the tile; make sure you leave a clearly visible film of
moisture on the surface. A second coat can be applied, if needed. In cases
of doubt, test in an inconspicuous area.
Drying Time: surface will be dry after approx. 40 to 60 minutes, depending
on temperature and humidity.
Coverage: approx. 15 to 20m2 per litre depending on surface.
Further Care Occasionally add Lithofin KF Tile Polish to the cleaning water
(one cup per ten litres) to touch up and maintain the protective film.

Storage
Closed and cool, frost free. Shelf life of up to 3 years.

Environmental Protection
The contained surfactants are biologically degradable according to
EU-regulations. Does not contain any phosphates.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyetylene (PE). Clean containers can be
recycled through collection system.



                                                                                                                               0800 1 560 560
LITHOFIN WEXA MULTI-PURPOSE CLEANER

                                  Disolves and thoroughly removes grease and oil deposits, care material residues, wax films, soot
                                  and the like.

                                  • CONCENTRATE                                       • MILDLY ALKALINE
                                  • UNIVERSALLY USABLE                                • COVERAGE: CA.7-15M2/L
                                  • PACKAGING: 1L, 5L




Description                                                                    Safety
Lithofin WEXA is a universally usable multi-purpose cleaning concentrate.      Contents: anionic surfactants ; non-ionic surfactants; phosphates; auxiliary
A combination of alkaline cleaning components and mild solvents allow          agents.
for a wide field of use. Lithofin WEXA can be diluted with water and can       General Information: as with all cleaners, avoid prolonged contact with skin
therefore be optimally adjusted for all uses.                                  or wear rubber gloves.
                                                                               First Aid Procedures: in case of contact with eyes rinse thoroughly with
Technical Data                                                                 plenty of water and seek medical advice. In case of ingestion, do not induce
Density: ca. 0,95 g/cm2                                                        vomiting. If swallowed by mistake drink plenty of water and seekmedical
pH-Value: ca. 10 (concentrate)                                                 treatment.
Appearance: yellowish, milky                                                   Emergency Procedures: in case of spill or other release, take up with
Odour: mildly aromatic, citrus-like                                            absorbent material (e.g. sand, sawdust, general-purpose binder). Product
                                                                               does not burn, fire-extinguishing activities according to
Properties                                                                     surrounding.
Lithofin WEXA dissolves and removes oold waxlayers, care product
residues, some sealants, selfgloss films, oily and greasy dirt, rubber and     ADR2003:
tar marks, paint, etc.                                                         not a dangerous good.

Field of Use                                                                   Packaging
For thoroughly cleaning all types of stones, tiles and other water and         1 litre bottle with childproof cap (10 bottles per box)
solvent resistant surfaces. Lithofin WEXA is universally usable in house,      5 litre canister (2 canisters per box)
garden, garage, workshop and industry. Can be used as a nearly odourless
wax and oil remover. Suitable for indoor and outdoor use.                      Please note: information about environmental protection and safety applies
                                                                               to the (concentrated) product as delivered. When the product is diluted,
Directions for Use                                                             these properties may change. This information should be considered to be
Apply Lithofin WEXA with a brush and allow it to work for 5 to 20 minutes      informal and non-binding. The products must be used according to local
depending on the stubbornness of the dirt deposit. Do not allow the            conditions and materials. Where no previous experience is available, or in
product to dry, brush occasionally. At the end of the working time, add        cases of doubt, test the product in an inconspicuous area.
water and brush. Remove the product from the surface with plenty of            (GB11.04gps/11.03)
water, either wiping or rinsing. In very stubborn cases, repeat this process
with longer working times and brushing. In case of light deposits, Lithofin
WEXA can be diluted up to 1:20 with water.
Please Note: solvent sensitive surfaces, such as rubber, plastics, newly
varnished surfaces, etc. may be attacked by the product. In cases of doubt,
test the product in an inconspicuous area.
Coverage: approx. 5-7 m2 per litre when used undiluted, up to 100 m2 when
used diluted.

Storage
Keep cool, closed and dry. Shelf life of up to two years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations. Free of chlorinated hydrocarbons.
Disposal: Containers are made of environmentally friendly tin plate. Clean
containers can be recycled through collection systems.




                                                                                                                             0800 1 560 560
LITHOFIN WAX-OFF

                                    Removes layers of wax, sealants, tar, oil stains, lacquer and glue. Soiling is dissolved and can then
                                    be washed off with water.

                                    • READY-TO-USE                                    • DEEP-ACTING
                                    • CONTAINS SOLVENTS                               • COVERAGE: CA.7-15M2/L
                                    • PACKAGING: 1L, 5L




Description                                                                    Safety
Lithofin WAX-OFF is a versatile, ready-to-use cleaner based on a highly        Contents: anionic surfactants; aliphatic and aromatic hydrocarbons;
active combination of solvents and cleaning components.                        auxiliary agents. Risk and Safety Phrases: flammable. Irritating to eyes and
                                                                               respiratory system. Toxic to aquatic organisms, may cause long-term
Technical Data                                                                 adverse effects in the aquatic environment. Harmful: may cause lung
Density: ca.0,82 g/cm2                                                         damage if swallowed. Repeated exposure may cause skin dryness or
pH-Value: n.a.                                                                 cracking. Vapours may cause drowsiness and dizziness. Keep out of the
Appearance: liquid, clear                                                      reach of children. Do not breathe vapour. Avoid contact with skin. If
Odour: aromatic, orange-like                                                   swallowed, do not induce vomiting: seek medical advice immediately and
Flash Point: approx. 39°C                                                      show this container or label.
Solubility in water: emulsifiable                                              First Aid Procedures: remove contaminated soaked clothing immediately.
                                                                               In case of inhalation, ensure of fresh air. In the event of symptoms refer for
Properties                                                                     medical treatment. In case of
Lithofin WAX-OFF dissolves organic dirt such as wax, oil, grease, tar, fresh   contact with skin wash off immediately with soap and water. In case of
paint, sealants, care product residues, etc. and allows them to be removed     contact with eyes rinse thoroughly with plenty of water and seek medical
with water.                                                                    advice. In case of ingestion, do not induce vomiting. If swallowed by
                                                                               mistake drink plenty of water and seek medical treatment.
Field of Use                                                                   Emergency Procedures: in case of spill or other release, take up with
For removing oily and greasy dirt deposits from solvent resistant surfaces     absorbent material (e.g. sand, sawdust, general-purpose binder). In case of
such as natural and engineered stone, ceramics, clay and quarry tiles,         fire formation of dangerous gases possible.
concrete, etc. Suitable for indoor and outdoor use. Also suitable for          Suitable extinguishing material: foam, dry powder, carbon dioxide, sand.
removing elastic joints (silicone).
                                                                               ADR2003:
Directions for Use                                                             flammable liquid, n.o.s.
Apply Lithofin WAX-OFF undiluted to the dry surface and distributed            UN 1993, Class 3
evenly. Allow the product to work for 5 to 20 minutes, brushing                Packaging Group II
occasionally. When all deposits are dissolved, add some water, brush and
remove the solution from the surface. On large surfaces use a squeegee or      Packaging
a wet and dry vac. Always rinse well with clear water. In case of stubborn     1 litre bottle with childproof cap (10 bottles per box)
deposits, repeat this procedure when the surface has dried.                    5 litre canister (2 canisters per box)
Please Note: the surface temperature must not exceed 25°C. Switch off
under florr heating. Solvent sensitive surfaces such as rubber, paint,         Please note: information about environmental protection and safety applies
varnish, linoleum, asphalt, some plastics, etc. must be protected against      to the (concentrated) product as delivered. When the product is diluted,
splashes. Always try the product in an inconspicuous area prior to use.        these properties may change. This information should be considered to be
Advice: in case of deep oil stains on natural and artificial stone, we         informal and non-binding. The products must be used according to local
recommend Lithofin OIL-EX.                                                     conditions and materials. Where no previous experience is available, or in
Coverage: approx. 7 to 15m2 depending on type and stubbornness of the          cases of doubt, test the product in an inconspicuous area.
deposits.                                                                      (GB11.04gps/5.02)

Storage
Keep cool, closed and dry. Shelf life of up to four years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations. Free of chlorinated hydrocarbons.
Disposal: Containers are made of environmentally friendly tin plate.
Clean containers can be recycled through collection systems.




                                                                                                                             0800 1 560 560
LITHOFIN KF MILDEW-AWAY

                                   Removes black spots, mould, fungus, algae and other organic discolorations in sanitary areas.
                                   Effective on tiles, silicon and cement joints, on plaster, stone and masonry.

                                   • EASY TO USE                    • FAST ACTING
                                   • CONTAINS CHLORINE              • COVERAGE: APPROX. 3M2/500ML
                                   • PACKAGING: 500ML-BOTTLE WITH SPRAYER




Description                                                                       Environmental Protection
A special product from the LITHOFIN-Range for ceramics, quarry tiles and          Surfactants are biologically degradeable in accordance with
porcelain (KF). Lithofin KF Mildew-Away is a ready-to-use special cleaner         EU-regulations. Disposal: diluted product may be added to waste water.
based on active chlorine compounds with a wide range of cleaning and              Containers are made of environmentally friendly polyethylene (PE). Clean
disinfecting properties.                                                          containers can be recycled through collection systems.

Technical Data                                                                    Safety
Density: approx. 1,1 g/cm2                                                        Contents: sodium-hypochlorite; non-ionic surfactants; auxilliary agents.
Appearance: liquid, clear, yellowish                                              Risk and Safety Phrases: irritating to eyes Keep out of the reach of children.
Odour: pungent                                                                    Do not breathe spray. In case of contact with eyes, rinse immediately with
pH-Value: approx. 13                                                              plenty of water and seek medical advice. If swallowed, seek medical advice
Flash Point: n.a.                                                                 immediately and show this container or label. Do not mix with acids. Do not
Solubility in Water: complete                                                     use in conjunction with other products, formation of dangerous gases
                                                                                  possible. Use only in wellventilated areas.
Properties                                                                        First Aid Procedures: remove contaminated soaked clothing immediately.
Lithofin KF Mildew-Away removes black mould and mildew spots as well              In case of inhalation, ensure of fresh air. In case of contact with skin wash
as discolouration caused by plants. The product works quickly and                 off immediately with soap and water. In case of contact with eyes rinse
efficiently, and through its preventive properties prevents further growth        thoroughly with plenty of water and seek medical advice. In case of
for a long time.                                                                  ingestion, do not induce vomiting. If swallowed by mistake drink plenty of
                                                                                  water and seek medical treatment.
Field of Use                                                                      Emergency Procedures: in case of spill or other release, take up with
For removing mould and mildew from cement and silicone grouting, from             absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
tiles and plastic parts in sanitary areas as well as for removing mould and       adequate ventilation. Product does not burn, fire-extinguishing activities
algae from masonry, concrete, natural stone and other similar surfaces.           according to surrounding. Special exposure hazards arising from the
                                                                                  substance, combustible products or resulting gases: Chlorine (Cl2).
Directions for Use                                                                Special protective equipment for fire fighters: Use breathing apparatus with
First remove the child-proof cap and replace it with the sprayer. Turn the        independent air supply.
nozzle to “spray” and, from adistance of approx. 15 to 20cm spray the
product on the afflicted surfaces. Allow the product to work for 10 to 20         ADR2003:
minutes, in very stubborn cases repeat the application after approx. 10           not a dangerous good.
minutes. Then completely remove from the surface with plenty of water
and a hard sponge or brush. Close the bottle with the childproof cap and          Packaging
clean the sprayer with water.                                                     500ml bottle with child-proof cap (10 per box) This information should be
Please Note: causes light stains on textiles. Do not spray on plants, textiles,   considered to be informal and non-binding. The products must be used
metals such as iron, copper, nickel, aluminium, etc. Immediately remove           according to local conditions and materials. Where no previous experience
splashes with plenty of water. Do not use on polished marble and sensitive        is available, or in cases of doubt, test the product in an inconspicuous area.
glazed tiles and enamel. We highly recommend trying the product in an             (GB11.04gps/12.02)
inconspicuous area prior to use.
Advice: in case of extreme mould growth on elastic joints, we recommend
removing the joint material, spraying the open joint with plenty of Lithofin
KF Mildew-Away and then closing the joint with new material.
Coverage: up to 5m2 per 500ml.

Storage
After use, remove sprayer and rinse well with water. Close bottle with
child-proof cap. Keep in cool and dark conditions. Store bottle standing up.
Use product within 6 months.




                                                                                                                                0800 1 560 560
LITHOFIN KF STAIN-STOP

                                  The special impregnation protects absorbent, stain-sensitive ceramic finishes against stains.
                                  Prevents the penetration of oil, grease and water to a high degree, making maintenance easier. No
                                  health hazard once the product has dried.

                                  • READY-TO-USE                                       • FOR INDOOR AND OUTDOOR USE
                                  • NO GLOSS                                           • LONG-TERM PROTECTION
                                  • CONTAINS SOLVENTS                                  • COVERAGE: CA.7-15M2/L
                                  • PACKAGING: 500ML, 1L, 5L

Description                                                                     Storage
A special product from the LITHOFIN-Range for ceramics, quarry tiles and        Keep closed, cool and dry. Shelf life of up to 3 years. Open containers
porcelain (KF). This ready-to-use special impregnator is solvent based and      should be used quickly.
contains high quality water and oil resistant components.
                                                                                Environmental Protection
Technical Data                                                                  Contains solvents, free of chlorinated hydrocarbons. Disposal: liquid
Density: approx. 0,78 g/cm2                                                     product is classified as special waste. Containers are made of
Appearance: liquid, colourless, clear                                           environmentally friendly tin plate. Clean containers can be recycled through
Odour: aromatic                                                                 collection systems.
pH-Value: n.a.
Flash Point: approx. 23°C                                                       Safety
Reduction in Water Absorbtion: 90 to 95%                                        Contents:hydrocarbons; auxiliary agents. Risk and Safety Phrases:
                                                                                flammable. Toxic to aquatic organisms, may cause long-term adverse
Properties                                                                      effects in the aquatic environment. Harmful: may cause lung damage if
Lithofin KF Stain-Stop penetrates into the surface and coats the capillaries    swallowed. Repeated exposure may cause skin dryness or cracking.
with an extremely thin, invisible film. Oil, grease and water are               Vapours may cause drowsiness and dizziness. Keep out of the reach of
not absorbed by the surface, but instead remain on the surface.                 children. Do not breathe vapour. Avoid contact with skin. If swallowed, do
During this time, dirt can easily be removed without leaving stains.            not induce vomiting: seek medical advice immediately and show this
The effectiveness depends on the amount of product absorbed by the              container or label.
surface. The characteristic appearance of the surface material is not or only   First Aid Procedures: remove contaminated soaked clothing immediately.
slightly altered.                                                               In case of inhalation, ensure of fresh air. In the event of symptoms refer for
                                                                                medical treatment. In case of contact with skin wash off immediately with
Field of Use                                                                    soap and water. In case of contact with eyes rinse thoroughly with plenty
For protecting unglazed ceramics against stains and for facilitating            of water and seek medical advice. In case of ingestion, do not induce
every-day maintenance. Highly recommended for use in kitchens,                  vomiting. If swallowed by mistake drink plenty of water and seek medical
bathrooms and other areas which may come into contact with water and            treatment. Emergency Procedures: in case of spill or other release, take up
oil. Please Note: Lithofin KF Stain-Stop does not or only slightly affect the   with absorbent material (e.g. sand, sawdust, generalpurpose binder).
slip resistance properties of the surface.                                      In case of fire formation of dangerous gases possible. Suitable
                                                                                extinguishing material: foam, dry powder, carbon dioxide, sand.
Directions for Use
The surface to be treated must be completely dry and clean. Where               ADR2003:
no prior experience exists or in cases of doubt, try the product in an          flammable liquid, n.o.s.
inconspicuous area prior to use. Areas should be treated in sections of         UN 1993, Class 3
approx. 10 to 15m2. On highly absorbent surfaces: evenly and generously         Packaging Group III
apply Lithofin KF Stain-Stop with a brush or roller. Avoid foam. On less
absorbent surfaces: use a brush or a cloth. After approx. 20 minutes, apply     Packaging
Lithofin KF Stain-Stop again to ensure that the entire surface is saturated.    1 litre bottle with child-proof cap (10 per box)
Then carefully remove all surface residues with a cloth. On large areas use     5 litre canister (2 per box)
a squeegee and a polishing machine with a white pad. Do not allow any
product to dry on the surface. On highly absorbent surfaces, a second           This information should be considered to be informal and non-binding. The
application after approx. 24 hours may be necessary. Attention! the liquid      products must be used according to local conditions and materials. Where
product must sink into the surface. Do not allow the product to dry on the      no previous experience is available, or in cases of doubt, test the product
surface. Dry residues will not be removable after 6 hours. Always try the       in an inconspicuous area. (GB11.04gps/10.03)
product in an inconspicuous area prior to use. Lithofin KF Stain-Stop can
only be used on absorbent and completely dry surfaces. Glass, ceramics,
wood, and other surfaces sensitive to solvents must be protected against
splashes. Application Temperature: the temperature of the surface should
be between 5°C and 25°C. Switch off under floor heating. Drying Time:
most solvents will evaporate within two hours. The product will be fully
effective after approx. 48 hours. Coverage: depends on the absorbency
of the material. Estimates: clay slabs: 4 to 8m2/litre unglazed quarry tiles:
8 to 12m2/litre Durability: up to 5 years in outdoor areas. Indoors, the
durability depends on the care products used. Strong de-greasing or layer
forming products are not suitable. For regular maintenance, we
recommend Lithofin KF Easy-Care.
                                                                                                                              0800 1 560 560
LITHOFIN MN POWER-CLEAN

                                  For thorough cleaning of used floors in case of severe general soiling, greasy dirt, residues of
                                  floor care materials, gloss-films etc. For final cleaning of new surfaces at building sites. This prod-
                                  uct is recommended for all types of natural stone, but especially for polished marble and lime-
                                  stone.

                                  • CONCENTRATE                                        • HIGHLY EFFECTIVE
                                  • ACID-FREE, MILDLY ALKALINE                         • NO SOLVENTS AND NO SMELL
                                  • COVERAGE: APPROX. 10-30M2/L                        • PACKAGING: 1L, 5L




Description                                                                     Safety
A special product from the LITHOFIN-Range for marble, natural and               Contents: non-ionic surfactant; solubilizer; auxilliary agents. Risk and
engineered stone (MN). Lithofin MN Power-Clean is a mildly alkaline             Safety Phrases: irritating to eyes. Keep out of the reach of children. In case
product, which contains a balanced mixture of cleaning components which         of contact with eyes, rinse immediately with plenty of water and seek
guarantee optimal performance.                                                  medical advice. If swallowed, seek medical advice immediately and show
                                                                                container or label.
Technical Data                                                                  First Aid Procedures: in case of inhalation ensure fresh air. In case of
Density: approx. 1,0 g/cm2                                                      contact with skin wash off immediately with soap and water. In case of
Appearance: liquid, colourless, clear                                           contact with eyes rinse thoroughly with plenty of water and seek medical
Odour: pleasant                                                                 advice. Do not induce vomitting. If swallowed by mistake drink plenty of
pH-Value: approx. 10                                                            water and seek medical treatment.
Flash Point: n.a.                                                               Emergency Procedures: in case of spill or other release, take up with
Solubility in Water: complete                                                   absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
                                                                                adequate ventilation. Product doeas not burn, fire-extinguishing
Properties                                                                      activities according to surrounding.
This special cleaner is nearly odourless and highly economic. Lithofin MN
Power-Clean removes grease and oil, all kinds of general and ingrained dirt     ADR2003:
as well as floor polish residues, old acrylic emulsions, care products, etc.    not a dangerous good.

Field of Use                                                                    Packaging
For thoroughly cleaning used or exceptionally dirty natural stone surfaces      500ml bottle with child-proof cap (10 per box)
and for initially cleaning newly laid surfaces. Suitable for use on polished,   1 litre bottle with child-proof cap (10 per box)
finely honed and rough marble and other natural stones. Facilitates             5 litre canister (2 per box)
removing cement residues from polished marble. Suitable for indoor and          Please Note: statements concerning environmental and safety issues refer
outdoor use.                                                                    to the product as delivered (concentrated). This information should be
                                                                                considered to be informal and non-binding. The products must be used
Directions for Use                                                              according to local conditions and materials. Where no previous experience
Apply and evenly distribute Lithofin MN Power-Clean as supplied or              is available, or in cases of doubt, test the product in an inconspicuous area.
diluted up to 1:5 depending on the nature of the dirt. Allow the product to     (GB11.04gps/12.02)
work for 10 to 20 minutes; brush occasionally. Do not allow to dry,
add water if necessary. Brush again before wiping up. On large areas, use
a squeegee to remove the product. Wash the surface thoroughly with clean
water. If the result is not satisfying, repeat allowing the product to work
longer and brushing more vigorously.
Please Note: avoid splashes on sensitive areas such as metal or wood,
painted or varnished surfaces, wall paper, etc. We highly recommend
trying the product in an inconspicuous area prior to use.
Coverage: as supplied: approx. 5 to 10m2 depending on dirt diluted: up to
30m2 Advice: for removing wax layers and the like, we recommend Lithofin
WAX-OFF. For cement residues and rust discolourations on granite and
gneiss, use Lithofin MN Builder’s Clean.

Storage
Keep closed, cool and dry. Not above 25°C. Shelf life of up to three years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations. Free of phosphates. Disposal: diluted product may be
added to waste water. Containers are made of environmentally friendly
polyethylene (PE). Clean containers can be recycled through collection
systems.


                                                                                                                              0800 1 560 560
LITHOFIN FZ PROTECTIVE IMPREGNATOR

                                   For initial treatment of new floors with polished and sensitive surfaces. Prevents penetration of
                                   water and oil, protects against stains and dirt, and makes maintenance easier.

                                   • READY FOR USE
                                   • INVISIBLE, DOES NOT FORM LAYERS
                                   • COVERAGE: UP TO 50M2/L
                                   • PACKAGING: 500ML, 1L, 5L




Description                                                                      Safety
A special product from the LITHOFIN-Range for fully vitrified ceramic and        Contents: polymers; water; auxiliary agents. General Information: keep out
porcelain tiles (FZ). Lithofin FZ Protective Impregnator is a water based        of the reach of children. Treated surfaces present no health hazard once
nearly odourless impregnator consisting of a combination of high quality         dry. First Aid Procedures: remove contaminated soaked clothing
water and oil resistant components.                                              immediately. In case of inhalation, ensure of fresh air. In case of contact
                                                                                 with skin wash off immediately with soap and water. In case of contact with
Technical Data                                                                   eyes rinse thoroughly with plenty of water and seek medical advice. In case
Density: approx. 1,0 g/cm2                                                       of ingestion, do not induce vomitting. If swallowed by mistake drink
Appearance: liquid, yellowish, clear                                             plenty of water and seek medical treatment.
Odour: non specific                                                              Emergency Procedures: in case of spill or other release, take up with
pH-Value: 3 to 6                                                                 absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
Flash Point: >65°C                                                               adequate ventilation. Product does not burn, fire-extinguishing activities
Solubility in Water: --                                                          according to surrounding. In case of fire formation of dangerous gases
                                                                                 possible.
Properties
This special impregnator effectively protects the surface against staining       ADR2003:
by inhibiting the penetration of water, oil, grease and dirt. Lithofin FZ        not a dangerous good
Protective Impregnator does not affect the appearance of the surface.
                                                                                 Packaging
Field of Use                                                                     1 litre bottle with child-proof cap (10 per box)
For protecting all newly laid absorbent polished and unglazed porcelain          5 litre canister (2 per box)
tiles in order to facilitate maintenance. Suitable for indoor and outdoor use.
                                                                                 This information should be considered to be informal and non-binding.
Directions for Use                                                               The products must be used according to local conditions and materials.
The surface to be treated must be completely clean and dry. Shake Lithofin       Where no previous experience is available, or in cases of doubt, test the
FZ Protective Impregnator well before use. Apply undiluted with a clean          product in an inconspicuous area. (GB11.04gps/12.02)
cloth or a lambs wool roller and ensure even distribution by wiping
(rolling) over the surface several times. For best results, treat the surface
in sections of approx. 15m2 at a time. After 10 to 20 minutes, completely
remove any surface residues with a squeegee or with a dry cloth.
Attention! the liquid product must sink into the stone. Immediately wipe off
puddles and drips. Do not allow the product to dry on the surface. Carefully
remove all residues and check against back light.
Please Note: impregnators are not suitable for all porcelain tiles. Always try
the product in an inconspicuous area prior to use. Protect glass, varnished
surfaces, plastics, etc. against splashes. Coverage: up to 50m2 per litre,
depending on the absorbency of the surface.

Storage
Keep closed, cool and dry. Shelf life of at least 12 months.
Open containers should be used quickly.

Environmental Protection
Solvent free, water based. Disposal: diluted product may be added to waste
water. Containers are made of environmentally friendly polyethylene (PE).
Clean containers can be recycled through collection systems.




                                                                                                                               0800 1 560 560
LITHOFIN MN SLATE-SEAL

                                  For rough and polished surfaces. Forms a shiny protective layer, strengthens the colour structure
                                  and simplifies maintenance.

                                  • READY FOR USE                                      • RECOMMENDED FOR INDOOR USE
                                  • CONTAINS SOLVENTS                                  • CAN BE APPLIED IN SEVERAL COATS
                                  • COVERAGE: APPROX. 10-20M2/L                        • PACKAGING: 1L, 5L




Description                                                                     Storage
A special product from the LITHOFIN-Range for marble, natural and               Keep closed, cool and dry. Shelf life of up to four years. Open containers
engineered stone (MN). This ready-to-use sealant contains high quality          should be used quickly.
acrylates and organic solvents.
                                                                                Environmental Protection
Technical Data                                                                  Contains solvents, free of chlorinated hydrocarbons.
Density: approx. 0,90 g/cm2                                                     Disposal: liquid product is classified as special waste. Containers are made
Appearance: liquid, colourless, clear                                           of environmentally friendly tin plate. Clean containers can be recycled
Odour: aromatic                                                                 through collection systems.
pH-Value: n.a.
Flash Point: >25°C                                                              Safety
Solubility in Water: not soluble                                                Contents: hydrocarbons; acrylates; polymers; auxiliary agents. Risk
                                                                                and Safety Phrases: flammable. Irritating to respiratory system. Toxic to
Properties                                                                      aquatic organisms, may cause long-term adverse effects in the aquatic
Lithofin MN Slate-Seal forms a shiny film on the surface, which closes          environment. Vapours may cause drowsiness and dizziness. Keep out of
the pores of the stone. This treatment prevents water and dirt                  reach of children. Do not breathe vapour. Avoid contact with skin.
from penetrating into the surface, making it easier to maintain. The            If swallowed, seek medical advice immediately and show this container or
permeability of the stone is greatly reduced. The colour structure of the       label.
stone is intensified; the surface develops a “wet look”. The slip resistance    First Aid Procedures: remove contaminated soaked clothing immediately.
can be affected depending on the type of stone and the amount of product        In case of inhalation, ensure of fresh air. In the event of symptoms refer for
applied. The protective film is hard-wearing and does not yellow.               medical treatment. In case of contact with skin wash off immediately with
Durability: indoors and with correct maintenance and depending on the           soap and water. In case of contact with eyes rinse thoroughly with plenty
level of wear and tear many years. Outdoors, depending on the type of           of water and seek medical advice. In case of ingestion, do not induce
stone the film will last for approx. 1 year. Can be reapplied when the effect   vomiting. If swallowed by mistake drink plenty of water and seek medical
fades.                                                                          treatment.
                                                                                Emergency Procedures: in case of spill or other release, take up with
Field of Use                                                                    absorbent material (e.g. sand, sawdust, general-purpose binder). In case
For glossy sealing of rough and honed natural and engineered stone              of fire formation of dangerous gases possible. Suitable extinguishing
surfaces. Embellishes the appearance and facilitates maintenance.               material: foam, dry powder, carbon dioxide, sand
Preferrably used indoors. Surfaces: nearly all absorbent, porous natural
stones (e.g. granite, gneiss, marble, limestone, slate, etc.) and engineered    ADR2003:
stones.                                                                         flammable liquid, n.o.s.
                                                                                UN 1993, Class 3
Directions for Use                                                              Packaging Group II
The surface to be treated must be completely dry and clean. Where no
prior experience exists or in cases of doubt, try the product in an             Packaging
inconspicuous area prior to use. Evenly apply Lithofin MN Slate-Seal with       1 litre bottle with child-proof cap (10 per box)
a clean roller or brush. In the case of highly absorbent surfaces, it may be    5 litre canister (2 per box)
necessary to apply a second coat. Please Note: non-absorbent, polished or
very finely honed surfaces can not be sealed. Glass, wood, varnish,             This information should be considered to be informal and non-binding. The
plastics and other surfaces sensitive to solvents must be protected against     products must be used according to local conditions and materials. Where
splashes. Tools can be cleaned with Lithofin WAXOFF. Lithofin MN                no previous experience is available, or in cases of doubt, test the product
Slate-Seal can be removed from the surface with Lithofin WAX-OFF.               in an inconspicuous area. (GB11.04gps/3.03)
Please ensure that no moisture can penetrate into the sealed surface, and
that moisture can not be transported through the surface from the ground.
Moisture inside the stone will cause the sealant to turn white.
Application Temperature: the temperature of the surface should be
between 5°C and 25°C. Switch off under floor heating.
Drying Time: safe to walk on after approx. 45 minutes, completely dry after
24 hours. Coverage: ca. 10m2/litre on rough limestone ca. 12m2/litre on
sawn granite ca. 20m2/litre on honed concrete stone


                                                                                                                              0800 1 560 560
LITHOFIN STAIN-AWAY

                                    Dissolves hardened wax layers, sealants, oil stains and grease residues, coats of paint and lac-
                                    quer etc.

                                    • READY-TO-USE                                    • EXTRA STRONG
                                    • CONTAINS CHC’S                                  • COVERAGE: APPROX. 7-10M2/L
                                    • PACKAGING: 1L




Description                                                                    Safety
This special remover contains alkalines and solvents. Lithofin STAIN-AWAY      Contents: dichlormethane, methanol, non-ionic surfactants (<5%),
removes stubborn organic dirt when other cleaners are no longer                alkalines, perfumes and auxilliary agents. Risk and Safety Phrases:
sufficient.                                                                    Possible risks of irreversible effects. Harmful: danger of serious damage to
                                                                               health by prolonged exposure through inhalation, in contact with skin and
Properties                                                                     if swallowed. Keep out of the reach of children. Do not breathe vapour.
Lithofin STAIN-AWAY softens incrusted layers of organic dirt and deposits      Avoid contact with skin and eyes. Wear suitable protective clothing and
so they can be washed off with water. The viscosity of the product allows      gloves. If swallowed, seek medical advice immediately and show this
it to be used on vetical surfaces as well.                                     container or label. Car. Cat. 3.
                                                                               First Aid Procedures: remove contaminated soaked clothing immediately.
Technical Data                                                                 In case of inhalation, ensure of fresh air. In the event of symptoms refer for
Density: approx. 1.2 g/cm2                                                     medical treatment. In case of contact with skin wash off immediately with
Flash Point: > 23°C (c.C.)                                                     soap and water. In case of contact with eyes rinse thoroughly with plenty
pH-Value: n.a.                                                                 of water and seek medical advice. In case of ingestion, do not induce
Appearance: viscous, cloudy                                                    vomiting. If swallowed by mistake drink plenty of water and seek medical
Odour: aromatic                                                                treatment. Emergency Procedures: in case of spill or other release, take up
Solubility in Water: emulsifiable                                              with absorbent material (e.g. sand, sawdust, general-purpose binder).
                                                                               In case of fire formation of dangerous gases possible.
Field of Use                                                                   Suitable extinguishing material: foam, dry powder, carbon dioxide, sand.
For removing incrusted wax layers, resinated oil and grease, crusted and
discoloured floor care products,paint and varnish, rubber, adhesive            Labelling Additional Comments on Freight Papers
residues, and other organic deposits from all solvent resistant surfaces.      a UN1593 none, limited quantities
Suitable for indoor and outdoor use. Surfaces: all quarry and ceramic tiles,   b Class 6.1,
natural stone such as granite, marble, travertine, etc, concrete and           UN1593
concrete tiles, wood and metal.                                                UN 1593 Dichlormethan, 6.1, III

Directions for Use                                                             Packaging
Generously apply Lithofin STAIN-AWAY to an approx. 5m2 large section of        a) 500ml bottle with childproof cap (10 per box)
the surface to be cleaned. Allow the product to work for 5 to 25 minutes.      b) 10 litre canister (single)
Brush occasionally. When the deposits are dissolved, add clear water,
brush and remove the solution from the surface.                                Please Note: statements concerning environmental and safety issues refer
Please Note: only use on dry surfaces. Lithofin STAIN-AWAY loses its           to the product as delivered (concentrated). This information should be
cleaning properties when mixed with water; do not dilute. After cleaning,      considered to be informal and non-binding. The products must be used
rinse the entire surface with plenty of clear water and bursh to remove        according to local conditions and materials. Where no previous experience
all product residues. Important: solvent sensitive surfaces such as            is available, or in cases of doubt, test the product in an inconspicuous area.
rubber, plastics, varnished surfaces, carpets, etc. must be protected from     (GB12.05gps/4.03)
Lithofin STAIN-AWAY. When in doubt, always test the product to ensure its
suitability.
Coverage: approx. 3 to 8m2 depending on the type of dirt.

Storage
Closed, cool and dry. Do not store in temperatures above 25°C. Shelf life
of up to 2 years.

Environmental Protection
Contains chlorinated hydrocarbons and should only be used when all other
methods have failed. Disposal: liquid product and product-water-solution
are considered special waste. Dispose of according to regulations. Product
must not enter the water system. Containers are made of environmentally
friendly tin plate. Clean containers can be recycled through collection
systems.


                                                                                                                             0800 1 560 560
LITHOFIN KF TILE RESTORER

                                   For thorough cleaning of used ceramic surfaces in case of particularly greasy general dirt; for
                                   removing encrusted floor care products and self-gloss films without leaving any traces.

                                   • CONCENTRATE                                        • SOLVENT FREE
                                   • MILDLY ALKALINE                                    • STRONGLY ACTING
                                   • SIMPLE TO USE                                      • COVERAGE: CA.10-30M2/L
                                   • PACKAGING: 1L, 5L




Description                                                                      Safety
A special product from the LITHOFIN-Range designed for ceramic                   Contents: non-ionic surfactants; sodium potassiumhydroxide; carbonates;
tiles (KF). Lithofin KF Tile Restorer is an alkaline, solvent-free, cleaning     auxiliary agents. Risk and Safety Phrases: causes burns. Keep locked
concentrate with a well-balanced combination of cleaning components and          up and out of the reach of children. In case of contact with eyes, rinse
special fat and dirt dissolving additives.                                       immediately with plenty of water and seek medical advice. Wear suitable
                                                                                 protective clothing, goves and eye/face protection. In case of accident or if
Technical Data                                                                   you feel unwell, seek medical advice immediately (show the label where
Density: approx. 1.1 g/cm2                                                       possible).
Appearance: liquid, yellowish                                                    First Aid Procedures: in case of inhalation ensure
Odour: pleasant                                                                  fresh air. In case of contact with skin wash off immediately with soap and
pH-Value: >12                                                                    water. In case of contact with eyes rinse thoroughly with plenty of water
Flash Point: >65°C                                                               and seek medical advice. Do not induce vomitting. If swallowed by mistake
Solubility in Water: --                                                          drink plenty of water and seek medical treatment.
                                                                                 Emergency Procedures: in case of spill or other release, take up with
Properties                                                                       absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure
Lithofin KF Tile Restorer dissolves and removes ingrained dirt, obstinate        adequate ventilation. Product does not burn, fire-extinguishing activities
general stains, oil and fat films, rubber and shoe marks, polymer and wax        according to surrounding.
layers, self-gloss emulsions, etc.
                                                                                 ADR2003:
Field of Use                                                                     caustic alkali liquid, n.o.s.
Lithofin KF Tile Restorer is used for all surfaces of coloured Victorian Tiles   UN 1719, Class 8
and all glazed or unglazed ceramic tiles. It has proved successful for           Packaging Group III
removing heavy dirt and maintenance of ceramic surfaces subject to
severe stress.                                                                   Packaging
                                                                                 1 litre bottle with child-proof cap (10 per box)
Directions for Use                                                               5 litre canister (2 per box)
Lithofin KF Tile Restorer is applied either neat or diluted in water at up to
1:10, depending on degree of soiling. Spread with a scrubber or wiping           Please Note: statements concerning environmental and safety issues refer
mop, and leave it to work for about 10 to 20 minutes, and scrub if               to the product as delivered (concentrated). This information should be
necessary. Do not let the solution start to dry. Then mop up with clean,         considered to be informal and non-binding. The products must be used
clear water, and then wipe once again with clean water.                          according to local conditions and materials. Where no previous experience
Please Note: do not use on polished marble and other surfaces sensitive to       is available, or in cases of doubt, test the product in an inconspicuous area.
alkali. Always try the product in an inconspicuous area prior to use.            (GB12.05gps/11.02)
Hint: we recommend Lithofin EASY-CARE for daily maintenance.
Coverage: as supplied: approx. 10 to 15m2 depending on dirt diluted:
approx. 50 to 100m2

Storage
Keep closed, cool and dry. Shelf life of up to five years.

Environmental Protection
Surfactants are biologically degradeable in accordance with
EU-regulations.
Disposal: diluted product may be added to waste water. Containers are
made of environmentally friendly polyethylene (PE). Clean containers can
be recycled through collection systems.




                                                                                                                               0800 1 560 560
LITHOFIN KF LIMESCALE-AWAY

         Completely dissolves all forms of limescale, encrustation and other deposits from shower heads,
         taps, bath and basin rim ceramics.

         • CONCENTRATE                           • MILDLY ACIDIOUS
         • PLEASANT SMELLING                     • COVERAGE: APPROX. 8 M2/500ML.
         • PACKAGING: 500ML




                                                                               0800 1 560 560

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:14
posted:9/6/2011
language:English
pages:24