Product Code ATF
A concentrated, heavy duty, cleaning fluid for use in high pressure cleaning machines. Designed to
remove traffic film or degrease engines, chassis and components.
Normal working strength is 0.5 per cent at the final nozzle. For the greatest economy and safety, the
detergent feed on the machine is adjusted to be just sufficient to give the required cleaning action. For
most machines pre-dilute the traffic film remover with an equal volume of water. Keep contact with
alkali sensitive materials to a minimum. Rinse the cleaned surface with water, not allowing the
cleaning solution to dry on. Machine manufacturers recommend you run plain water through the
machine after use.
Health and Safety
Irritant, contains sodium hydroxide (0.5-2.0%)
U.N. Number not applicable.
R36/38 Irritating to eyes and skin.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S2 Keep out of reach of children.
Produced by Morclean Jan 1998 wpd 'atf[fro' rc 6.0
PRODUCT SAFETY DATA SHEET
APPEARANCE: Pale Yellow Liquid
Product Name: AUTOVAL TRAFFIC FILM REMOVER ODOUR: Mild, characteristic.
CODE: ATF pH 1% IN WATER (TYPICAL): 10.4
SUPPLIER: MORCLEAN (HEAD OFFICE & ACCOUNT) BOILING POINT: 100C
Stephenson Road, MELTING POINT: Not applicable.
Speedwall Industrail Estate, STAVELEY,
Chestersfield, England S43 3JN
FLASH POINT: None.
Tel: (Chesterfield) 01246 471147
AUTO-IGNITION TEMP: None.
Fax (Admin & Sales): 01246 471247 EXPLOSIVE PROPERTIES: Not applicable.
Fax (Spares/Parts): 01246 270500
OXIDISING PROPERTIES: None.
VAPOUR PRESSURE: 17.5 mm Hg at 20C
RELATIVE DENSITY AT 20C (TYPICAL): 1.052
(2) COMPOSITION/INFORMATION ON INGREDIENTS SOLUBILITY: Miscible with water.
VISCOSITY: Free flowing.
Sodium hydroxide 1-2%
Sodium silicates 0.5-2%
(10) STABILITY AND REACTIVITY
Anionic surfactant 1-5%
Nonionic surfactant 0-1% HAZARDOUS REACTION: Incompatible with strong oxidising
agents and acids.
(3) HAZARDS IDENTIFICATION HAZARDOUS DECOMPOSITION PRODUCTS: None
HAZARDOUS POLYMERISATION: Will not occur.
EYE CONTACT: Will cause severe irritation. STABILITY: Stable.
SKIN CONTACT: Will cause irritation.
CONTACT WITH RESPIRATORY SYSTEM: Not a hazard in (11) TOXICOLOGICAL INFORMATION
normal use. Breathing fine mist may cause irritation.
FLAMMABILITY: Not combustible.
OTHER: Not applicable. EYE CONTACT: Will cause severe irritation.
SKIN CONTACT: Will cause irritation.
(4) FIRST AID MEASURES INHALATION: Not a hazard in normal use. Breathing fine mist may
cause irritation of the respiratory tract.
INGESTION: Moderate toxicity. Will cause severe irritation and
EYE CONTACT: Immediately flush eyes with water, holding eyelids damage to gastro-intestinal tract due to alkalinity.
apart, for at least 10 minutes. Seek medical assistance at once. LONG TERM: Based on current knowledge, no long term effects are
SKIN CONTACT: Remove contaminated clothing. Wash skin with anticipated if used correctly.
water and seek medical attention if irritation persists.
INHALATION: If fine mist is breathed remove to fresh air, keep warm (12) ECOLOGICAL INFORMATION
and at rest. Seek medical attention immediately.
INGESTION: Do not induce vomiting. Give 200-300 ml of water to drink
and seek medical assistance immediately. Phosphate free. All organic ingredients are biodegradable when well
diluted. Do not allow this product to enter water courses untreated.
(5) FIRE FIGHTING MEASURES Not applicable.
(6) ACCIDENTAL RELEASE
Consult national and local regulations.
Dilute well with water and dispose of in an approved and permitted
Take the necessary precautions to prevent contact. Shut off leaks if this biological treatment plant.
can be done without personal risk. Contain the spillage if possible.
Keep the area clear. Flush to foul sewer with a large quantity of water.
Observe Local Authority regulations. (14) TRANSPORT INFORMATION Not classified for
(7) HANDLING & STORAGE
(15) REGULATORY INFORMATION Irritant.
Store in a cool, dry place, protected from frost and away from acids and
strong oxidising agents. Occupational exposure limits: Sodium hydroxide 2mt/M³
OES 10 minute STEL
(8) EXPOSURE CONTROLS/PERSONAL PROTECTION
(16) OTHER INFORMATION
EYE PROTECTION: Chemical splash goggles.
It is for users to satisfy themselves of the suitability of this product for
HAND PROTECTION: Wear impervious gloves. their own applications.
BODY PROTECTION: As necessary to prevent contact. This information is believed to be accurate at the time of printing and is
RESPIRATORY PROTECTION: Not a hazard in normal use. given in good faith.
Avoid breathing spray. Produced by Morclean WPD6 'atf' rc 6.1
OTHER PROTECTIVE MEASURES: Not applicable. Date of issue: 20Jan 1998
(9) PHYSICAL & CHEMICAL PROPERTIES