Chevron Automatic Transmission Fluid MD-3 - ravansanatoil.com by suchenfz

VIEWS: 147 PAGES: 8

									Automotive Transmission Fluids
Chevron offers a complete line of high-quality Automatic Transmission Fluids to meet these
tough conditions. Use the general guide below to select the right ATF for your vehicle.
However, always check your owner's manual for the required type of transmission fluid.

MD-3
Chevron Automatic Transmission Fluid MD-3 is a passenger car and light truck automatic
transmission fluid for most pre-2006 automatic transmissions built by General Motors, Ford
Motor Company and other makes requiring a high-performance, multi-purpose, power
transmission fluid. Chevron Automatic Transmission Fluid MD-3 is formulated with special
base oil for exceptional protection from heat, oxidation and wear. It is recommended for all
applications that call for the former DEXRON® III and MERCON® fluids and for Allison
C-4 fluids. Learn More

ATF+4®
Chevron ATF+4® Automatic Transmission Fluid is formulated with high purity synthetic
base stocks. It is designed to maintain its viscosity through excellent oxidation stability and
the use of long lasting viscosity modifiers. Chevron ATF+4 is specially formulated to give
full protection in all critical areas for Chrysler Group transmissions. Learn More

DEXRON®
Chevron Automatic Transmission Fluid DEXRON® -VI is designed to maintain its viscosity
through excellent oxidation stability and the use of long lasting viscosity modifiers.
DEXRON® -VI is designed specifically for use in all General Motors HydraMatic
transmissions produced for model year 2006 and beyond. It is the latest generation
technology approved for use by General Motors in automatic transmissions and automatic
transaxles where a DEXRON® -VI fluid is specified. Learn More

Multi-Vehicle
Chevron Multi-Vehicle ATF (MERCON® V) is an advanced technology high performance,
multipurpose power transmission fluid. Chevron Multi-Vehicle ATF is fully approved and
licensed under the MERCON® V and Allison C-4 specifications. In addition, it is suitable for
service fill of many transmissions manufactured by North American, Asian and European
OEMs. It provides excellent performance at all temperatures and is formulated to resist
viscosity breakdown for long fluid life. Learn More

Type F
Type F is specifically designed for most pre-1977 Ford vehicles and some makes between
1977 and 1981. Effective March 1997, Ford discontinued administration of approvals for
Type F fluids. However, there are still many vehicles on the road that use Type F. Type F and
MERCON fluids are not interchangeable.

Chevron ATF Type F is a high friction ATF for older Fords that specifically call for a Type F
fluid. Learn More




Chevron Automatic Transmission Fluid MD-3
Chevron Automatic Transmission Fluid MD-3 is a passenger car and light truck automatic
transmission fluid for most pre-2006 automatic transmissions built by General Motors, Ford
Motor Company and other makes requiring a high-performance, multi-purpose, power
transmission fluid.

It is formulated with ISOSYN® base stocks and additives that provide oxidation and thermal
stability, friction control, load-carrying ability, corrosion and wear protection. It helps protect
against the formation of deposits, sludge, varnish, and foam.

Chevron Automatic Transmission Fluid MD-3 provides outstanding durability.

Under the most severe operating conditions, Chevron Automatic Transmission Fluid MD-3:

      maintains friction control for smooth shift action
      is specially formulated to prevent shudder
      retains low temperature fluidity and high temperature stability for long operating periods
      protects automatic transmission fluid coolers from corrosion
      practically eliminates transmission overhauls due to sludge, corrosion, and wear

Customer Benefits

Chevron Automatic Transmission Fluid MD-3 delivers value through:

      Protection against the formation of lacquers, sludge, or other harmful deposits.
      Exceptional stability provided by excellent base oil and extra oxidation inhibitors.
      Quiet performance – Especially effective in reducing transmission "chatter." Assures smooth,
       quiet action at all speeds.
      Fast circulation during cold weather and excellent lubricating body when hot.
Applications

Chevron Automatic Transmission Fluid MD-3 is designed for use in most pre-2006 automatic
transmissions built by General Motors, Ford Motor Company and other makes requiring a
high performance, multi-purpose, power transmission fluid. It is recommended for all
applications that call for the former DEXRON®-III H and MERCON® fluids and for Allison
C-4 fluids.

Chevron Automatic Transmission Fluid MD-3 is also used as a light oil in compressors,
pumps and hydraulic systems.

      Always check your owners manual to determine the proper automatic transmission fluid for
       your transmission.
      General Motors transmissions manufactured in 2006 and beyond generally require a
       DEXRON®-VI automatic transmission fluid.
      Ford transmissions manufactured after 1996 may require a MERCON® V automatic
       transmission fluid.
      Ford transmissions manufactured before 1977 and some pre-1982 transmissions require a
       Type F fluid such as Chevron ATF Type F.
      Chrysler transmissions manufactured after 1996 require ATF+4® automatic transmission
       fluid.

Chevron Automatic Transmission Fluid MD-3 meets or exceeds manufacturer's performance
requirements:

      Caterpillar TO-2
      Allison C4 Fluid
      Denison P-46 Piston Pump
      Vickers Pump




Chevron ATF+4® Automatic Transmission Fluid
Chevron ATF+4® Automatic Transmission Fluid is formulated with high purity synthetic
base stocks. It is designed to maintain its viscosity through excellent oxidation stability and
use of long lasting viscosity modifiers.

ATF+4 has improved low temperature fluidity and viscosity breakdown performance over
previous generation Chrysler ATF fluids.

Chevron ATF+4 Automatic Transmission Fluid is specially formulated to give full protection
in all critical areas of Chrysler transmission operation.
Chevron ATF+4 Automatic Transmission Fluid:

      lubricates and prevents wear in gears, clutches, and bearings
      transfers engine power effectively
      removes heat efficiently
      operates well over a wide temperature range
      resists thermal and oxidative breakdown
      provides sufficient viscosity at high temperatures with minimal sheardown
      gives proper friction performance for Chrysler vehicles (smooth shift feel, no shudder)
      protects seals, gaskets, and other nonferrous components
      prevents sludge and varnish formation
      resists foaming

Customer Benefits

Chevron ATF+4 Automatic Transmission Fluid delivers value through:

      Warranty coverage as an officially approved Chrysler® Group fluid
      Correct viscosity and frictional characteristics to ensure smooth operation in Chrysler
       transmissions
      Extended drain intervals of at least 100,000 miles under normal operating conditions
      Long-lasting viscosity modifiers for longer fluid life

Applications

Chevron ATF+4 Automatic Transmission Fluid is designed for use in all Chrysler Group
automatic transmissions and automatic transaxles where a Mopar ATF PLUS®, ATF+2®,
ATF+3® or ATF+4® fluid is specified. The Chrysler Group includes Chrysler, Dodge,
Plymouth, Jeep and Eagle vehicles.

It is not recommended for use in transmissions specifying either DEXRON® or MERCON®
type fluids.

Chevron ATF+4 Automatic Transmission Fluid has been registered with the Chrysler
Corporation, license number 406300335.

Do not use in high pressure systems in the vicinity of flames, sparks and hot surfaces. Use
only in well ventilated areas. Keep container closed.
Chevron Automatic Transmission Fluid
Dexron®-VI
Chevron Automatic Transmission Fluid DEXRON®-VI is formulated with high purity
synthetic base stocks. It is designed to maintain its viscosity through excellent oxidation
stability and use of long lasting viscosity modifiers. Internal General Motors tests have shown
more than twice the durability and stability in friction tests compared to standard DEXRON-
III fluids. This will ensure consistent and smooth shift performance, even under extreme
driving conditions. Extensive validation testing by General Motors has shown DEXRON-VI
to be significantly better than previous DEXRON fluids in nearly every performance area.

Chevron Automatic Transmission Fluid DEXRON®-VI:

      Maintains friction control for smooth, consistent shifting
      Prevents clutch shudder in torque converters
      Improves fuel economy relative to previous DEXRON fluids because of lower viscous drag
       and outstanding low temperature pumpability
      Practically eliminates transmission overhauls due to sludge, corrosion, and wear
      Operates well over a wide temperature range
      Resists thermal and oxidative breakdown
      Provides sufficient viscosity at high temperatures with minimal sheardown
      Protects gears, bearings, clutch plates, seals, bushings and other components from wear and
       degradation
      Resists foaming and thereby gives better operability and longer equipment life

Customer Benefits

Chevron Automatic Transmission Fluid DEXRON®-VI delivers value through:

      Warranty coverage as an officially approved General Motors fluid
      Improved durability of viscosity and frictional properties to ensure smooth operation in
       General Motors transmissions
      Extended drain intervals of at least 100,000 miles under normal operating conditions
      Back serviceability to cover all earlier DEXRON recommendations

Applications

Chevron Automatic Transmission Fluid DEXRON®-VI is designed specifically for use in all
General Motors HydraMatic transmissions produced for Model Year 2006 and beyond. It is
the latest generation technology approved for use by General Motors in automatic
transmissions and automatic transaxles where a DEXRON®-VI fluid is specified. It is also
back serviceable in transmissions calling for DEXRON®-III or DEXRON®-II fluids.

Chevron Automatic Transmission Fluid DEXRON®-VI is not recommended for use in
transmissions which do not specify a DEXRON® fluid. In particular, it should not be used in
applications which call for Allison C-4, ATF+3®, ATF+4®, or MERCON® type fluids.

Chevron Automatic Transmission Fluid DEXRON®-VI meets General Motors specification
GMN10060 and has been registered with license number J60308.
Do not use in high pressure systems in the vicinity of flames, sparks and hot surfaces. Use
only in well ventilated areas. Keep container closed.




Chevron Multi-Vehicle ATF
Chevron Multi-Vehicle ATF is an advanced technology, high performance, multipurpose
power transmission fluid. It is fully approved and licensed under the MERCON® V and
Allison C-4 specifications. In addition, it is suitable for service fill of many transmissions
manufactured by North American, Asian, and European OEMs.

It is formulated with premium, severely hydroprocessed base stocks and carefully crafted
additives that provide oxidation and thermal stability, friction control, load-carrying ability,
corrosion and wear protection. It helps protect against the formation of sludge, varnish, other
harmful deposits, and foam.

Compared to conventional ATFs, Chevron Multi-Vehicle ATF has exceptional low
temperature flow properties and enhanced protection against viscosity breakdown at high
temperatures. It also has superior oxidation and thermal stability, resulting in longer service
life.

Under the most severe operating conditions, this fluid:

      Maintains friction control for smooth shift action and prevention of shudder
      Retains high temperature viscosity resulting in increased oil film thickness and better wear
       protection
      Greatly extends the time to transmission overhauls due to sludge, corrosion, or wear of
       gears, bearings, and clutches.

Customer Benefits

Chevron Multi-Vehicle ATF delivers value through:

      Lower inventory cost – One ATF can be used for the vast majority of automatic transmissions
       on the road today.
      Longer equipment life – Advanced formula protects against wear, corrosion, and the
       formation of lacquers, sludge, or other harmful deposits.
      Longer oil life – Premium base oil and extra oxidation inhibitors result in increased oil service
       life.
      Smoother operation – Carefully chosen friction modifiers allow for smooth shifting, efficient
       power transfer, and anti-shudder protection.
Applications

Chevron Multi-Vehicle ATF is recommended for all applications that call for the former
DEXRON®-III H fluid and for MERCON® V and Allison C-4 fluids. It has passed the
performance test requirements of ZF and Voith.

Chevron Multi-Vehicle ATF is suitable for service fill of the vast majority of vehicles made
in North America. It will also work well in many Japanese, Korean, and European vehicles
such as those made by Acura, BMW, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Jaguar, KIA,
Land Rover, Lexus, Mazda, Mitsubishi, Nissan, Saab, Subaru, Suzuki, Toyota, Volkswagen,
and Volvo.

Chevron Multi-Vehicle ATF has the following qualifications:

      Allison Transmission – C4-31632005
      Ford MERCON V – M5050901
      Voith – G607
      ZF – TE-ML 14A

Chevron Multi-Vehicle ATF has been tested for performance in Japanese transmissions under
the JASO 1A ATF standard. The product will deliver the shifting performance and superior
anti-shudder durability which is desired by Japanese and Korean automakers.

Always check your owner’s manual to determine the proper automatic transmission fluid for
your vehicle.

Chevron Multi-Vehicle ATF is not suitable for a limited number of special applications, such
as:

      Ford transmissions manufactured before 1977 and some pre-1982 transmissions require a
       Type F fluid such as Chevron ATF Type F (no friction modifier)
      Vehicles with continuously variable transmissions (CVTs) require special fluids.




Chevron Automatic Transmission Fluid Type F
Chevron Automatic Transmission Fluid Type F is a high performance lubricating fluid for
pre-1977 (and some 1977 to 1981) automatic transmissions built by Ford Motor Company
and other makes requiring a high friction Type F fluid.
It is manufactured using selected highly refined base oils and additives that provide oxidation
and thermal stability, friction control, cleanliness, load-carrying ability, corrosion and wear
protection, and prevent the formation of foam.

Chevron Automatic Transmission Fluid Type F is red in color for identification and leakage
control.

Chevron Automatic Transmission Fluid Type F protects against deposits, corrosion and wear,
provides proper shifting action, resists oxidation and viscosity increase, and ensures long
transmission life.

Customer Benefits

Chevron Automatic Transmission Fluid Type F delivers value through:

      Protection against the formation of lacquers and other harmful deposits
      Exceptional stability provided by excellent base oil and extra oxidation inhibitors
      Quiet performance – Especially effective in assuring proper action in Ford, Lincoln, and
       Mercury transmissions at all speeds.
      Fast circulation during cold weather and excellent lubricating body when hot.

Applications

Chevron Automatic Transmission Fluid Type F is recommended for automatic transmissions
in Ford, Mercury, and Lincoln passenger cars and light trucks manufactured by Ford Motor
Company and certain other makes prior to 1977, and some makes from 1977 to 1981 (consult
the vehicle owners manual).

This fluid is not to be used in Ford transmissions that require a fluid meeting Ford M2C138-
CJ. Chevron Automatic Transmission Fluid DEXRON®-III/MERCON® is the recommended
fluid in this case.

Chevron Automatic Transmission Fluid Type F meets the requirements of former Ford
specification M2C33-F.

Do not use in high pressure systems in the vicinity of flames, sparks and hot surfaces. Use
only in well ventilated areas. Keep container closed.

								
To top