Blinking Printer by kikoek06


									 Why your printer gets blink on its lamp? and then why your printer doesn't work? It means the printer
should be reset. It will occurs when your printer is giving warnings that your printer is due maintenance,
                                                     this usually means that the printer has counted the
                                                    amount of prints you've printed and reached a limit,
                                                             which is set in the printer hardware.
                                                The printer will stop completely after a certain amount of
                                                   prints (overflow), normally requiring you to take your
                                                   printer to an Epson dealer for servicing and resetting.
                                                 The service maintenance that would then be carried out
                                                 is the draining / replacement of the ink pad that catches
                                                 all the waste ink and resetting of the protection counter.
                                                  The ink pad replacement may be unnecessary, as this is
                                                    rarely full when the maintenance messages appear.
                                                    Therefore, the only requirement now is to reset the
                                                  counter which will then release your printer hardware
                            and start counting your prints from zero once more.

 If the printer has passed the maximum prints and you've continued printing throughout the warnings,
  after the 'overflow' amount of prints, it will lock out completely giving you two flashing lights on your
      printer which you can't reset without this software or without pressing a sequence of buttons.

To top