Docstoc

How to Reset Your Air Conditioner Filter Light

Document Sample
How to Reset Your Air Conditioner Filter Light Powered By Docstoc
					Cabin Air Conditioner:

     1. Press and hold down the Off button for 4 seconds.

Carrier Air Conditioner:

     1. Press the Reset Filter button to reset the timer that calculates the next air filter change
        after you have inspected / cleaned the indoor return air filter.

Daikan Air Conditioner:

     1. Press the Filter Clean Reset button to reset the CLEAN FILTER INDICATOR after you
        have inspected / cleaned the indoor return air filter.

Frigidaire Air Conditioner:

     1. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.

GE Air Conditioner:

     1. Turn the air conditioner OFF and unplug it.
     2. The air conditioner must be unplugged for the automatic filter clean timer to reset. Clean the filter.
     3. After cleaning, replace the filter and plug the air conditioner back in.

Honeywell Air Conditioner:

     1. Press and hold the i button until the timer is displayed, followed by pressing the Up
        Arrow button (next to the Wake button)
     2. Press the Run Program button.

Kenmore Air Conditioner:

     1. To reset the filter indicator, press and hold the filter reset button for 3 seconds.

Lexus Air Conditioner:

     1. Without having foot on the brake, press the Start button twice to get to the IG-ON
        position.
     2. Then press and hold the "hard" OFF button next to the "hard" Auto button. Hold the OFF
        button for approx 5 seconds and you hear several beeps.

or

     1. Turn the engine switch to IG-ON mode.
     2. Push and hold the A/C OFF button for more than 4 seconds.
Lexus 2008 Air Conditioner:

     1. Push the "INFO" button & touch "Maintenance".
     2. Touch the desired button Delete All: To cancel all conditions which have been input or
        Reset All: To reset the item which has satisfied a condition. If "ON" is selected, the
        system gives maintenance information with the "Information" screen when the system is
        turned on. If "OFF" is selected, the "Information" screen is disabled.
     3. Input the Notice of Date: The next maintenance date must be input.
     4. Now input the Notice of Distance: The driving distance until the next maintenance check.
     5. Delete: To cancel the date and distance conditions.
     6. Reset: To reset the date and distance conditions.
     7. Touch "OK" The screen returns to the "Maintenance screen.

Lincoln LS 2001 Air Conditioner:

     1. Press and hold the setup button above the radio until it says system check. NOTE: All the
        doors must be closed.
     2. Watch the system check when it goes to A/C filter hit the reset button.
     3. Hold down the reset button to confirm.

Lincoln LS 2003 Air Conditioner:

     1. Press the STATUS control to access the System Check function, the message center will
        display A/C FILTER XX% RESET FOR NEW.
     2. Press and hold the RESET control to set to 100%.

Lincoln LS 2005 Air Conditioner:

     1. Insert the key and turn the ignition to "Run" or "On." It is not necessary to start the
        engine.
     2. Press the "Status" button above the radio until the system display changes to "AC Filter."
     3. Press and hold "Reset" above the radio. The system will beep and the "AC Filter" display
        resets to "100%."

Maytag Air Conditioner:

     1. Press the "Fan" button 2 times, then press the "Mode" button 1 time and it will reset.

Whirlpool Air Conditioner:

     1. Push in the filter reset on the remote using a straightened out paper clip or similar.

or

     1. On the control panel, press and hold the Mode and the Up Temp Arrow buttons for 6
        seconds.
or

     1. After having cleaned the filter just press the reset button located on the indoor unit behind
        the front panel to interrupt the flashing of the filter monitor indicator.

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:1101
posted:9/2/2011
language:English
pages:3