Docstoc

COMPRESSOR MAPS COMPRESSOR MAPS

Document Sample
COMPRESSOR MAPS COMPRESSOR MAPS Powered By Docstoc
					                                  COMPRESSOR MAPS                                                                                                                                                                                                                                                                                                                          COMPRESSOR MAPS




                                                                                                                                                                                                                                                                                                                                                                                                                                           MAPS
MAPS


                                  HOW TO PROPERLY MATCH A TURBOCHARGER                                                                                                                                                                                         as P2/P1, is located on the left hand vertical axis of the compressor For most street applications the best solution for selecting turbine
                                                                                                                                                                                                                                                               map. Select a compressor map where the air flow and the pressure wheels and turbine housings, is to choose the smallest wheel
                                  Turbocharger systems are a complex combination of many different                                                        turbocharged. The best rule to gauge how much airflow an engine will                                 ratio intersect at a flow rate where the plotted efficiency is no less diameter available that meets the horsepower level wanted. Turbine
                                  parts. From the turbo itself and intercooler to the fuel management                                                     need to make a certain amount of power is to use a factor of 10. This                                than 70%-65% for a street application. There will probably be more wheel HP limits are located on page 48. It is also important to
                                  system and the quality of the engine’s internal components, a vehicle                                                   is based upon the rule that it generally takes 1 lb. of air to make 10 HP.                           than one compressor which will satisfy your requirements – in this remember that response/spool-up time is greatly affected by turbine
                                  must have many different things just in the right order to run properly.                                                Thus, if an engine makes 500 HP then it flows 50 lbs. of air per minute.                             case, pick the compressor which has the LOWEST surge air flow limit wheel diameter and turbine housing A/R. The A/R sizing can be used
                                                                                                                                                                                 It is also important to note that cubic feet per                              at the selected pressure ratio – this will provide                                              as a tool to fine tune the response range in the
                                  One of the most important aspects to a well
                                                                                                                                                                                 minute or cfm, is not a valid value to use in                                 the widest range of performance at the boost         “There will probably be more than          RPM band. The smaller the A/R, the faster the
                                  designed turbo system is choosing the right
                                                                                                                                                                                 measuring air for turbochargers. Once a                                       pressure your vehicle will be operating at.          one compressor which will satisfy          turbocharger will be able to spool up from the
                                  compressor and turbine wheel correctly the
                                                                                                                                                                                 turbocharger has compressed air, the air has                                                                                        your requirements – in this case,         increase in exhaust gas velocity entering the
                                  first time. When the right wheels are selected                                                                                                                                                                               Turbine selection must also be considered for a
                                                                                                                                                                                 density. This density gives the air weight and                                                                                    pick the compressor which has the turbine housing. Backpressure has become a
                                  you can be confident that the turbocharger is                                                                                                                                                                                successful turbocharger match. Most
                                                                                                                                                                                 must be measured in lbs./minute. The                                                                                                                                          major tuning issue associated with high
                                  going to perform exactly as it should without                                                                                                                                                                                turbochargers described in this catalog are
                                                                                                                                                                                                                                                                                                                    LOWEST surge air flow limit at the
                                                                                                                                                                                 conversion formula from cfm to lbs./min. is to                                                                                                                                performance turbocharged engines and the
                                  complications from surging, excessive lag, or
                                                                                                                                                                                 multiply or divide by 0.0691 depending upon                                   designed for use with an external wastegate or        selected pressure ratio – this will
                                  overspeeding. There are a few key mathematical                                                                                                                                                                                                                                        provide the widest range of            turbine wheel and turbine housing A/R are both
                                                                                                                                                                                 the conversion direction. For example 500 HP                                  other device to bleed off excess exhaust
                                  formulas and general information points that                                                                                                                                                                                                                                      performance at the boost pressure          critical to maximizing the performance of the
                                                                                                                                                                                 or 50 lbs./min equals 723.59 cfm (50 / 0.0691)                                energy when a desired boost is attained.
                                  you should be familiar with before choosing                                                                                                                                                                                                                                                                                  turbo system. Backpressure is the pressure that
                                                                                                                                                                                 and 723.59 cfm equals 50 lbs./min. (723.59 x                                  TURBONETICS Inc. offers four different external      your vehicle will be operating at”.
                                  your wheels.                                                                                                                                                                                                                                                                                                                 the exhaust gas generates trying to enter into
                                                                                                                                                                                 0.0691). Keep this conversion in mind when                                    gates matched for various HP outputs.
                                                                                                                                                                                                                                                                                                                                       the turbine housing inlet. If backpressure becomes too great (a 2:1 ratio),
                                  This section is intended to provide general                                                                                                    selecting a compressor wheel, as this is a key                                Turbine selection is a variable based on intended use, weight, and the exhaust gases can not escape the cylinder head and can possibly
                                  turbocharger sizing information not specific turbocharger-vehicle-                                                      point in selecting a compressor wheel for a turbocharger.                                            desired response. Turbine power available to drive the compressor cause major tuning, performance and durability issues. It is important
                                  engine solutions. Typical turbocharger matches are the result of                                                                                                                                                             wheel can vary in two ways: 1) The area to radius (A/R) ratio of the to try to keep the backpressure to boost pressure ratio as low as
                                                                                                                                                          After the HP is converted to airflow in lbs./min., a compressor wheel
                                  engine dynamometer testing and installed vehicle performance                                                                                                                                                                 turbine housing can be changed to alter turbine inlet pressure; and possible and should be no greater than 1.5:1 for best performance
                                                                                                                                                          selection can be made by matching the air flow plotted on the
                                  evaluation. Often, compromises must be made to arrive at a match                                                                                                                                                             2) The turbine wheel trim can be specified to affect an increase or (Example: 15 psi of boost to 22.5 psi of backpressure).
                                                                                                                                                          compressor map, with the associated pressure ratio. Pressure ratio is
                                  that yields satisfactory response and power.                                                                                                                                                                                 decrease in turbine pressure for a given turbine housing A/R (see page
                                                                                                                                                          defined as absolute compressor discharge pressure P2, divided by the
                                  Actual power produced by any gasoline-fueled engine is a function of                                                    absolute inlet (ambient) pressure. For example: (boost pressure in psi                               46-47 for various turbine housing selections).
                                  how much air flows through the cylinder head and engine itself,                                                         + ambient pressure in psi; ie. 15 psi of boost + 14.7 psi (1 atmosphere)                                                                   To view all of Turbonetics compressor maps, log on to www.turboneticsinc.com
                                  regardless of whether it is naturally aspirated, supercharged or                                                        / 14.7 (1 atmosphere) = 2.02 Pressure Ratio. The pressure ratio, shown
                                                                                    To view all of Turbonetics compressor maps, log on to www.turboneticsinc.com                                                                                                                                                                                                                    HP 106
                                                                                                                                                                                                                                                                              HP 76
                                                                   T04E-50                                                                                      T04B 60-1




                                                                                                                                                                                                                                                                                                                                             P R E S S U R E R AT I O P c / P 1 c
                                                                                                                                                                                                                                       P R E S S U R E R AT I O P c / P 1 c
                            P R E S S U R E R AT I O P c / P 1 c




                                                                                                                         P R E S S U R E R AT I O P c / P 1 c
       turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                                                                                                                            turboneticsinc.com
                                                                                                                                                                                                                                                                                                                                                                               Corrected Mass Air Flow (LB/MIN) = W√ T1c/545/ (P1c/28.4)
                                                                                                                                                                Corrected Mass Air Flow (LB/MIN) = W√ T1c/545/ (P1c/28.4)
                                                          Corrected Mass Air Flow (LB/MIN) = W√ T1c/545/ (P1c/28.4)
                                                                                                                                                                                                                                                                              Corrected Mass Air Flow (LB/MIN) = W√ T1c/545/ (P1c/28.4)




  42                                                                                                                                                                                                                                                                                                                                                                                                                                       43
COMPRESSORS




                                                                                                                                                                                                                                                                                                                                                                                 COMPRESSORS
                                   COMPRESSOR WHEELS & HOUSINGS                                                                                                                                                                                COMPRESSOR WHEELS & HOUSINGS



                                                                                                   T3 COMPRESSOR
                                                                                                   WHEELS & HOUSINGS - BIG SHAFT
                                                                                                                                                                                                               T04E SUPER COMPRESSOR
                                                                                                                 WHEELS                                    HOUSING-POLISHED                                    WHEELS & HOUSINGS - BIG SHAFT
                                                                                                    Trim      Part No.   Inducer   Major           Inlet       Part        Inlet        Part        Chrysler
                                                                                                                                                   Size        No.         Size         No.         Turbo II               WHEELS                                   HOUSING-POLISHED
                                                                                                     35       20266T      1.396    2.367          2.35''       20499       3.00''      20499-3        N/A      TRIM      PART NO.    INDUCER    MAJOR        INLET SIZE        PART NO.      INLET SIZE        PART NO.
                                                                                                     40       20267T      1.484    2.367          2.35''       20372       3.00''      20372-3        N/A
                                                                                                                                                                                                                40        20574T      1.870       3.20           2.75''            30424          3.00”         30425
                                                                                                     45       20263T      1.595    2.367          2.35''       20373       3.00''      20373-3        N/A
                                                                                                                                                                                                                46        20575T      2.003       3.20           2.75''            30426          3.00”         30427
                                                                                                     50       20268T      1.674    2.367          2.35''       20374       3.00''      20374-3       20658
                                                                                                                                                                                                                50        20576T      2.122       3.20           2.75''            30490          3.00”         30491
                                                                                                     55       20264T      1.760    2.367          2.35''       20500       3.00''      20500-3        N/A
                                                                                                                                                                                                                54        20577T      2.170       3.20           2.75''            30429          3.00”         30462
                                                                                                     60       20272T      1.830    2.367          2.35''       20375       3.00''      20375-3       20659
                                                                                                                                                                                                                57        20578T      2.230       3.20           2.75''            30430          3.00”         30431
                                                                                                   SUPER 60   20324T      1.900    2.367          2.35''       20376       3.00''      20376-3       20649
                                                                                                                                                                                                                60        20579T      2.290       3.20           2.75''            30497          3.00”         30432



                                                                                                   All compressor housings
                                                                                                   come polished                                                                                                 Super T04E wheels feature larger 3.20'' major
                                                                                                                                                                                                                 diameter for increased airflow.



                                   T04B COMPRESSOR
                                   WHEELS & HOUSINGS - BIG SHAFT
                                                  WHEELS                               HOUSING-POLISHED
                                    TRIM       PART NO.    INDUCER      MAJOR         INLET SIZE   PART NO.       INLET PART NO.
                                   SUPER-S      20394T       2.298       3.000          2.75''       20202         3.0'' 20202-3                                                                                                                                                                                                              60-1 full-sized housings feature
                                   SUPER-V      20364T       2.180       3.000          2.75''       20203         3.0'' 20203-3                                                                                                                                                                                                              4'' inlet and .70 A/R for
                                   SUPER-H      20288T       2.298       3.000          2.75''       20192         3.0'' 20192-3                                                                                                                                                                                                              maximum efficiency.




                                                                                                                                                                                                                                                                                      60-1 / 62-1 COMPRESSOR
                                                                                                                                                                                                                                                                                      WHEELS & HOUSINGS - BIG SHAFT
                                   All Turbonetics compressor wheels cast with
                                   H.I.P. - Hot Isostatic Processing, to ensure the                                                                                                                                                                                                                       WHEELS                        HOUSING-POLISHED
                                   strongest wheels possible.                                                                                                                                                                                                                              TRIM        PART NO.      INDUCER    MAJOR   INLET SIZE           PART NO.
                                                                                                                                                                                                                                                                                       60-1 HI-FI         20230T        2.324    3.00     2.75''               20210
                                                                                                                                                                                                                                                                                         60-1             20177T        2.324    3.00     4.00''               20190
                                                                                                                                                                                                                                                                                         62-1             20255T        2.441    3.00     4.00''               20249




                                                                                                   T04E COMPRESSOR                                                                                             T-SERIES COMPRESSOR
                                                                                                   WHEELS & HOUSINGS - BIG SHAFT                                                                               WHEELS & HOUSINGS - BIG SHAFT
                                                                                                                  WHEELS                                   HOUSING-POLISHED
                                                                                                                                                                                                                           WHEELS                                   HOUSING-POLISHED
                                                                                                    TRIM      PART NO.   INDUCER   MAJOR          INLET SIZE    PART NO.    INLET SIZE         PART NO.
                                                                                                                                                                                                               TRIM      PART NO.    INDUCER     MAJOR              INLET SIZE                      PART NO.
                                                                                                      40      30373T       1.870    3.00            2.75''       30424         3.00”             30425
                                                                                                      46      30374T       2.003    3.00            2.75''       30426         3.00”             30427         HP-58      30335        2.300      3.304                   4.00''                     20450
                                                                                                      50      30375T       2.122    3.00            2.75''       30490         3.00”             30491         HP-61      30423        2.403      3.542                   4.00''                     20498
                                                                                                      54      30376T       2.170    3.00            2.75''       30429         3.00”             30462         HP-66      30327        2.580      3.584                   4.00''                     20452
                                                                                                      57      30377T       2.230    3.00            2.75''       30430         3.00”             30431         HP-70      30329        2.720      3.850                   4.00''                     20453
                                                                                                      60      30378T       2.290    3.00            2.75''       30497         3.00”             30432         HP-72      30336        2.840      4.030                   4.00''                     20454
                                                                                                                                                                                                               HP-76      30372        3.020      4.030                   4.00''                     20466
              turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                                                                    turboneticsinc.com
                                                                                                   Compressor housings feature the most
                                                                                                   efficient A/R sizes to match each individual                                                                  Log on to www.turboneticsinc.com to view all the
                                                                                                   compressor wheel trim.                                                                                        Turbonetics Turbocharger dimensions in the tech
                                                                                                                                                                                                                 data section.




     44                                                                                                                                                                                                                                                                                                                                                                          45
TURBINES




                                                                                                                                                                                                                                                                                                                                            TURBINES
                                TURBINE HOUSINGS                                                                                                                                                                                                                         TURBINE HOUSINGS

                                4 BOLT T3 TURBINE HOUSING                                                                                                                                    T4 TURBINE HOUSINGS - ON CENTER                                           T4 TURBINE HOUSING - TANGENTIAL/DIVIDED
                                                                                                                         A/R              TRIM                  STYLE             PART NO.
                                                                                                                                                                                                                                                                         A/R     TRIM         STYLE         V BAND PART NO. SLIP PART NO.
                                                                                                                         .48            STAGE 1                 4 BOLT             21283-1
                                                                                                                                        STAGE 2                 4 BOLT             21283-2                                                                               . 58   STAGE V      TANG/DIV          20694-5
                                                                                                                                        STAGE 3                 4 BOLT             21283-1                                                                                         P                           20694-3          20665
                                                                                                                                        STAGE 5                 4 BOLT             21283-5                                                                                         S                           20694-4

                                                                                                                         .63            STAGE 1                 4 BOLT             21284-1                                                                               . 70   STAGE V      TANG/DIV          20695-5
                                                                                                                                        STAGE 2                 4 BOLT             21284-2                                                                                         P                           20695-3          20666
                                                                                                                                        STAGE 3                 4 BOLT             21284-3                                                                                         S                           20695-4
                                                                                                                                        STAGE 5                 4 BOLT             21284-5
                                                                                                                                                                                                                                                                         . 84   STAGE V      TANG/DIV          20696-5
                                                                                                                                                                                                                                                                                   P                           20696-3          20667
                                                                                                                                                                                                                                                                                   S                           20696-4
                                                                                                                           A/R           TRIM                   STYLE            PART NO.
                                T3 TURBINE HOUSING                                                                                                                                                   FRONT                                          BACK                1.00         P       TANG/DIV          20698-3          20668
                                                                                                                           . 36         STAGE I                                  20369-1
                                                                                                                                        STAGE II              STANDARD           20369-2                                                                                             S                         20698-4
                                                                                                                                        STAGE III                                20369-3
                                                                                                                                        STAGE V                                  20369-5                                                                                1.15         P       TANG/DIV          20697-3          20669
                                                                                                                                                                                              A/R             TRIM               STYLE         ON CENTER PART NO.                    S                         20697-4
                                                                                                                                                                                              . 58           STAGE V          ON CENTER             20258-5
                                                                                                                                                                                                                P                                   20258-3             1.32         P       TANG/DIV          20670-3          30261
                                                                                                                           . 48         STAGE I                                  20357-1                        S                                   20258-4                          S                         20670-4
                                                                                                                                        STAGE II              STANDARD           20357-2
                                                                                                                                        STAGE III                                20357-3      . 69           STAGE V          ON CENTER             20269-5             1.52         P       TANG/DIV          20671-3          30262
                                                                                                                                        STAGE V                                  20357-5                        P                                   20269-3                          S                         20671-4
                                                                                                                                                                                                                S                                   20269-4

                                                                                                                                                                                              . 81           STAGE V          ON CENTER             20281-5
                                                                                                                                                                                                                                                                       front
                                                                                                                           . 63         STAGE I                                  20358-1                        P                                   20281-3
                                                         Standard T3                                                                    STAGE II              STANDARD           20358-2                        S                                   20281-4
                                                                                                                                        STAGE III                                20358-3
                                                                                                                                        STAGE V                                  20358-5       .96              P             ON CENTER             20296-3
                                                                                                                                                                                                                S                                   20296-4
                                                                                                                                                                                                                                                                                                          All Tangential Turbine Housings
                                                                                                                                                                                                                                                                                                          now feature 3˝ v-band discharge
                                                                                                                                                                                              1.30              P             ON CENTER             20237-3
                                                                                                                           . 82         STAGE I                                  20359-1                        S                                   20237-4
                                                                                                                                        STAGE II              STANDARD           20359-2
                                                                                                                                        STAGE III                                20359-3
                                                                                                                                        STAGE V                                  20359-5                                                                                                          back

                                                                                                                                                                                             T4 TURBINE HOUSING -
                                                             G/N                                                           . 63         STAGE I                                  20307-1     TANGENTIAL/UNDIVIDED
                                                                                                                                        STAGE II               CHRYSLER          20307-2
                                                                                         CHRYSLER                                       STAGE III                                20307-3
                                                                                                                                        STAGE V                                  20307-5                                                                                                                       top
                                                                                                                                                                                             All Tangential Turbine Housings
                                                                                                                                                                                             now feature 3˝ v-band discharge
                                TOYOTA CT-26                                                                               . 63          STOCK                                   20241-1
                                                                                                                                                                                             machined into housing

                                                                                                                                        STAGE III                G/N             20241-3
                                                                                                                                                                                                                                                                       T4 TURBINE HOUSING -
                                                                                                                                        STAGE V                                  20241-5                                                                               TANGENTIAL/DIVIDED-EURO
                                                                                                                                         P TRIM                                  20241-P
                                                                                                                                                                                              A/R      TRIM              STYLE       V BAND PART NO.   SLIP PART NO.     A/R    TRIM         STYLE          V BAND PART NO. SLIP PART NO.
                                                                                                                                                                                              . 50    STAGE V          TANG/UN-DIV        20672-5                        . 84    P        TANG/DIV/EURO         20699-3         30456
                                                                                                                                                                                                         P                                20672-3         30252                  S                              20699-4
                                 A/R      TRIM      STYLE   PART NO.         NOTES                                         . 82          STOCK                                   20240-1
                                STOCK    STOCK SUPRA 7MG 20535-1       STOCK REPLACEMENT                                                STAGE III                G/N             20240-3      . 58    STAGE V                             20690-5                       1.00     P        TANG/DIV/EURO         20700-3         30457
                                        STAGE III SUPRA 7MG 20535-3    USE WITH T3/T4 Chra                                              STAGE V                                  20240-5                 P                                20690-3         20673                  S                              20700-4
                                        STAGE V SUPRA 7MG 20535-5      USE WITH T3/T4 Chra                                               P TRIM                                  20240-P                 S                                20690-4

                                                                                                                                                                                              . 68    STAGE V                             20691-5
                                                                                                                                                                                                         P                                20691-3         20459
           turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                              turboneticsinc.com
                                3K K-26 TURBINE HOUSINGS                                             A/R     TRIM         STYLE                     PART NO.           NOTES                             S                                20691-4
                                                                                                    8 CM2    STOCK        88-89 944 PORSCHE         20536-1            STOCK REPLACEMENT
                                                                                                             STAGE II     PORSCHE/AUDI              20536-2            USE WITH T3/T4 CHRA    . 81       P                                20692-3         20393
                                                                                                             STAGE III    PORSCHE/AUDI              20536-3            USE WITH T3/T4 CHRA               S                                20692-4
                                                                                                             STAGE V      PORSCHE/AUDI              20536-5            USE WITH T3/T4 CHRA            STAGE V                             20692-5

                                                                                                    10 CM2   STOCK        88-89 944 PORSCHE         20537-1            STOCK REPLACEMENT      . 96       P                                20693-3         20689
                                                                                                             STAGE II     PORSCHE/AUDI              20537-2            USE WITH T3/T4 CHRA               S                                20693-4
                                                                                                             STAGE III    PORSCHE/AUDI              20537-3            USE WITH T3/T4 CHRA
                                                                                                             STAGE V      PORSCHE/AUDI              20537-5            USE WITH T3/T4 CHRA



    46                                                                                                                                                                                                                                                                                                                                      47
                                TURBINE WHEELS                                                                                                                                                                                                    EXHAUST MANIFOLDS




                                                                                                                                                                                                                                                                                                 MANIFOLDS
TURBINES


                                TURBINE WHEEL DESIGN                                                                                                                                                                                                                         EXHAUST MANIFOLDS
                                This is the area that has seen the greatest performance gain         configuration, designed to maximize the exhaust gas energy
                                over the past few years. Turbonetics utilizes 713C Inconel for all   and still keep backpressures low. Backpressure is the opposite
                                of it’s turbine wheels. 713C Inconel, a nickel based super alloy,    of boost pressure. It is the pressure of the exhaust gas trying to
                                is much stronger and has a higher temperature threshold than         get past the turbine wheel. When the backpressure is elevated
                                most other turbine wheel materials. Blade design has also            it can prevent the turbocharger from continuing to make boost
                                changed markedly of late. Older turbine wheels featured 11 or        and efficiently deliver air to the engine. The F1 wheels minimize
                                more blades. As horsepower has continually increased so has          backpressure to allow the most horsepower possible for a given
                                the need to maximize the efficiency of the exhaust wheel.            wheel size.
                                Turbonetics’ F1 Turbine wheels are a 10 bladed, tall-tip-height


                                                                                                                                                                                                                                                                     PN 21139
                                                                                                                                    All Turbine wheels now come standard
                                                                                                                                    “Big Shaft” including all T3 wheels
                                                                                                                                                                           VEHICLE                                                  ENGINE                    TURBO/GATE MOUNT      PART NO.

                                                                                                                                                                           ACURA/HONDA
                                                                                                                                                                                Integra/Honda Civic V-Tec & Non-Tec                 1.8L & 1.6L (B18 & B16)   T3/Evolution          21135
                                                                                                                                                                                Honda Civic                                         1.5L & 1.6L (D15/16)      T3/Evolution          30512
                                                                                                                                                                                Honda Prelude                                       2.2L DOHC (H22)           T3/Evolution          30535
                                                                                                                                                                                Honda Accord                                        2.2L SOHC (F22)           T3/Evolution          30536*
                                                                                                                                                                                Acura RSX/Honda K Series                            2.0L K20                  T3/Evolution          31063
                                                                                                                                                                                S2000                                               2.0L                      T3/Evolution          30537

                                                                                                                                                                           AUDI
                                                                                                                                                                                   A3, '96 - 2000 Transverse Engine                 1.8L 20V                  T3/Evolution          30513

                                                                                                                                                                           BMW
                                                                                                                                                                                   3.25/3.28i, M3 ('87-'97) E36, 525, 530           2.5L/2.8L/3.0L            T3                    30528

                                                                                                                                                                           DODGE
                                                                                                                                                                                   SRT-4 ('03-'05) A853                             2.4L                      T3/Evolution          31092

                                                                                                                                                                           MAZDA
                                                                                                                                                                                626 '90-'98                                         2.0L 16V                  T3/Evolution          30515*
                                                                                                                                                                                Pick-up B2000 & B2200, '79-'94                      2.0L 8V & 2.2L 12V        T3/Evolution          30516*
                                                                                                                                                                                Pick-up B2600, '89-Up                               2.6L                      T3/Evolution          30517

                                                                                                                                                                           MITSUBISHI
                                                                                                                                                                                Eclipse '90-'99 (Factory Turbo) Conv.T3/4           2.0L                      T3/Evolution          21139
                                                                                                                                                                                Eclipse '95-'99 (non turbo)                         2.0L                      T3/Evolution          30532*
                                                                                                                                                                                Starion, Montero '83-'89                            2.6L                      T3/Evolution          30533
                                                                                                                                                                                Lancer Evolution VIII                               2.0L                      T3/Evolution          31060

                                                                                                                                                                           NISSAN
                                                                                                                                                                                 Pick-up '99-Up                                     2.4L 16V                  T3/Evolution          30519*
                                                                                                                                                                                 Pick-up / Pathfinder '99-Up                        3.3L 12V (V6)             T3/Evolution          30520*
                                                                                                                                                                                 Patrol                                             4.5L 12V (inline 6 cyl)   T3/Evolution          30521*
                                                                                                                                                                                 240SX                                              2.4L                      T4/Evolution          30534
                                                                                                            TRIM            HP          EXDUCER DIA.       MAJOR DIA.            Sentra Spec-V                                      2.5L QR25DE               T3/Evolution          21436
                                                                                                            T3                                                             SUZUKI
                                                                                                            Stage I        325HP           1.916"            2.320"              Esteem, Sidekick, Swift GTI                        1.3L DOHC/1.6L 16V        T3/Evolution          30522*
                                                                                                            Stage II       400HP           2.120"            2.555"
                                                                                                            Stage III      475HP           2.227"            2.555"        TOYOTA
                                                                                                            Stage V        550HP           2.437"            2.795"              Celica        (5SFE, 3SFE or 3SGTE)                2.0L & 2.2L               T3/Evolution          30523
                                                                                                                                                                                 MR2 90'-95' turbo/non-turbo(5SFE, 3SFE or 3SGTE)   2.0L & 2.2L               T3/Evolution          30523
                                                                                                            T04                                                                  RAV4          (5SFE, 3SFE or 3SGTE)                2.0L & 2.2L               T3/Evolution          30523
                                                                                                            P              700HP           2.542"            2.920"              Land Cruiser, '93-'99 (1FZFE)                      4.5L 24V                  T4                    30524*
                                                                                                            S             1000HP           2.693"            3.111"              Pick Up, '81-'95                                   22R 2.4L 8V               T3/Evolution          30525*
                                                                                                            MID FRAME                                                            Supra Twin turbo conversion to single TO4B/E/S     2JZ-GTE                   T4/Racegate           30526
                                                                                                            F1            1000HP           2.960''           3.230''             Supra '82-'91 non-turbo & factory turbo            5MGE & 7MGE               T4                    30527
           turboneticsinc.com




                                                                                                                                                                                                                                                                                                   turboneticsinc.com
                                                                                                                                                                                 Scion xB                                           1.5L                      T3/Evolution          31061
                                                                                                            Y2K                                                                  Scion tC                                           2.4L                      T3/Evolution          21279
                                                                                                            STAGE 1       1200HP           3.306''           3.80''
                                                                                                            STAGE 2       1400HP           3.955''          4.3165''       VOLKSWAGEN
                                                                                                                                                                                Bug, Jetta, Golf IV                                 1.8L 20V                  T3/Evolution          30513
                                                                                                            THUMPER                                                             Corrado '92-Up / Golf GTI 92'-Up                    2.8L VR-6                 T4/Evolution          30529*
                                                                                                            E             1000HP           3.780''           5.100''            Golf GTI '90-'92                                    2.0L 16V                  T3/Evolution          30530
                                                                                                            F             1500HP           4.180''           5.100''            Jetta, Scirocco '86-'88                             1.8L & 2.0L 16V           T3/Evolution          30530
                                                                                                            G             2000HP           4.400''           5.100''
                                                                                                                                                                           * Special Order Item




    48                                                                                                                                                                                                                                                                                           49
                                   PARTS & ACCESSORIES                                                                                                                                                                                                PARTS & ACCESSORIES




                                                                                                                                                                                                                                                                                                                       ACCESSORIES
ACCESSORIES


                                   ASME COMPRESSOR INLET KITS                                                                                                                           HEATSHIELDS                                                     V-BAND TURBINE DISCHARGE PARTS
                                   Designed and engineered with ASME specifications, the                   Manufactured of spun aluminum, kit comes complete with
                                                                                                                                                                                        Stainless steel construction utilizing the most advanced
                                   compressor inlet kit allows you to achieve maximum air                  polished horn, hose & clamps. Adds approximately 2.5-3" to
                                                                                                                                                                                        aerospace materials available. (For T4; Max. temperature:
                                   velocity while increasing air volume at your compressor inlet.          length of turbo inlet.
                                                                                                                                                                                        1600ºF). Heat shielding made of aerospace ceramic fiber
                                                                                                                                                                                        wrapped with corrugated aluminum foil. Ideal for protecting
                                      PART NO.                   DESCRIPTION
                                                                                                                                                                                        sensitive components.
                                      10766                      3'' Inlet Kit
                                      10767                      4'' Inlet Kit

                                                                                                                                                                                                                                                                                               PN 20244
                                                                                                                                                                                                                                                                                            Turbine Housing
                                                                                                                                                                                                                                                                                              Weld Flange




                                                                                                                                                                                                                                                                    PN 30242
                                                                                                                                                                                                                                                                  V-Band Clamp




                                                                                                                                                                                                PN 30149 On-Center
                                                                                                                                                                                                                                                                                                     PN 30241
                                                                                                                                                                                                                                                                                                  Tube Weld Flange



                                                                                                                            Manny Buginga
                                                                                                                                                                                                                            PN 20163
                                                                                                                            2005 World Challenge SSO Champion
                                                                                                                            Uses a single Super Thumper turbo.                                                                                           V-BAND TURBINE
                                                                                                                            First true 10.5'' tire vehicle to break the 200 MPH mark.                                                                    DISCHARGE PARTS
                                                                                                                                                                                                                                                          PART NO.               DESCRIPTION
                                                                                                                                                                                                                                                          30230                  Housing Weld Flange, 2.5''
                                                                                                                                                                                                                                                          20244                  Housing Weld Flange, 3''
                                   STAINLESS STEEL BELLOWS                                                   PLENUMS                                                                                                                                      20534                  Housing Weld Flange, 3.5''
                                                                                                                                                                                                                                                          20533                  Housing Weld Flange, 4''
                                                                                                             LOW PROFILE PLENUM                                                                                                                           30231                  Tube Weld Flange, 2.5''
                                                                                                                                                                                                                                                          30241                  Tube Weld Flange, 3''
                                                                                                             Pressure plenum with 3" side entry. Low profile, great for                                                                                   30407                  Tube Weld Flange, 3.5''
                                                                                                             use where hood clearance is a factor. Fits standard 5.5"                           PN 31040                                                  30409                  Tube Weld Flange, 4''
                                                                                                             carb. inlet.                                                                       T3 5-Bolt Discharge                                       30419                  Y2K/Thumper Tube Weld Flange
                                                                                                                                                                                                                                                          30231-S                Tube Weld Flange - Stainless, 2.5''
                                                                                                                                                                                                                                                          30241-S                Tube Weld Flange - Stainless, 3''
                                                                                                                                                                                                                                                          30407-S                Tube Weld Flange - Stainless, 3.5''
                                                                                                                                                                                                                                                          30409-S                Tube Weld Flange - Stainless, 4''
                                               PN 30318
                                                                                                                                                                                                                                                          30232                  V-Band Clamp Assembly, 2.5''
                                                          PN 30316                                                                                                                                                                                        30242                  V-Band Clamp Assembly, 3''
                                                                             PN 30800           PN 30799                         PN 20200                       PN 10351                                                                                  30408                  V-Band Clamp Assembly, 3.5''
                                   PN 30271
                                                                                                                                                                                                                                                          30410                  V-Band Clamp Assembly, 4''
                                                                                                             PRESSURE PLENUM                                                                                             PN 30223 Tangential              30421                  Y2K/Thumper V Band Clamp
                                     STAINLESS STEEL ELBOWS
              turboneticsinc.com




                                                                                                                                                                                                                                                                                                                          turboneticsinc.com
                                       PART NO.             DESCRIPTION                                      Pressure plenum with 2.5" top and side entry. Supplied with                                                                                  20760                  V-Band Adapter, 3''- 3.5''
                                                                                                             PN 20204, blank flange and gasket. Fits standard 5.5" inlet,                                                                                 20761                  V-Band Adapter, 3 - 4''
                                       30271                Stainless Steel Elbows, 1.5'' ID                                                                                                HEATSHIELDS
                                       30316                Stainless Steel Elbows, 2'' ID                   can be modified to fit most four barrel EFI throttle bodies.
                                       30318                Stainless Steel Elbows, 3'' ID                                                                                                      PART NO.                       DESCRIPTION
                                       30799                HD Stainless Steel Elbows, 2.5'' ID x 7.1L
                                                                                                             Ball-burnished finish.
                                                                                                                                                                                                30149                      T4 Standard, On-Center
                                       30800                HD Stainless Steel Elbows, 2.5'' ID x 9.25 L     PLENUMS                                                                            30223                      T4 Standard, Tangential
                                                                                                                                                                                                31040                          T3, Tangential
                                                                                                                 PART NO.                       DESCRIPTION                                     20163                       Heatshield, 6” X 14”
                                                                                                                 10351                          3” side entry
                                                                                                                 20200                          2.5” top and side entry



     50                                                                                                                                                                                                                                                                                                                51
                                   HOSES & CLAMPS                                                                                                                                                                                                                        HOSES & CLAMPS




                                                                                                                                                                                                                                                                                                                                     ACCESSORIES
ACCESSORIES


                                   NITRILE CONNECTOR                                                                                                                            SILICONE CONNECTORS
                                   NITRILE 90° ELBOWS
                                   (Nitrile Rubber for Intake Only — Non Pressurized Plumbing)                                                                                  Top-quality, high-strength, high-
                                                                                                                                                                                temperature hose couplings.
                                    SIZE                PART NUMBER                                                                                                                                                                                         SILICONE
                                    2''                   PN 30208
                                                                                                                                                                                Multi-layered flurosilicone with
                                                                                                                      NITRILE 45° ELBOWS                                                                                                                    VACUUM HOSES
                                    2.25''                PN 30168                                                                                                              fiberglass reinforcements.                                                                                                Vacuum Hoses
                                    2.5''                 PN 30170
                                    2.75''                PN 30217                                                    SIZE             PART NUMBER                                                                                                           SIZE              BLUE                   RED               BLACK
                                                                                                                      2.25''             PN 30221                                                                                       Transition Hoses
                                    3''                   PN 30190                                                                                                                                                                                           .156'' ID       30542-B                30542-R            30542-BK
                                    4''                   PN 30199                                                    3''                PN 30216                                 SILICONE TRANSITION HOSES                                                  .250'' ID       30543-B                30543-R            30543-BK
                                    5''                   PN 30218                                                    4''                PN 30169
                                                                                                                      5''                PN 30171                                   SIZE                    BLUE                RED                BLACK
                                                                                                                                                                                                                                                            SOLD BY THE FOOT.
                                                                                                                                                                                    1.75'' to 2.5''        30488-1            30488-3             30488-4
                                   (Notrile Rubber for Intake Only —                                                                                                                2'' to 2.25''          30436-1            30436-3             30436-4
                                   Non Pressurized Plumbing)                                                                                                                        2'' to 2.375''         30437-1            30437-3             30437-4                    SILICONE HUMP HOSES
                                                                                                                                                                                    2'' to 2.5''           30438-1            30438-3             30438-4
                                                                                                                                                                                                                                                                              SIZE         BLUE               RED          BLACK
                                                                                                                                                                                    2'' to 2.75''          30477-1            30477-3             30477-4
                                                                                                                                                                                    2'' to 3''             30501-1            30501-3             30501-4                     2''         30379-1           30379-3       30379-4
                                                                                                                                                                                    2.25'' to 2.5''        30311-1            30311-3             30311-4                     2.25''      30433-1           30433-3       30433-4
                                                                       NITRILE                                                                                                      2.25'' to 2.75''       30637-1            30637-3             30637-4                     2.375''     30434-1           30434-3       30434-4
                                                                                                                                                                                    2.25'' to 3''          30638-1            30638-3             30638-4                     2.5''       30380-1           30380-3       30380-4
                                                                       TRANSITION HOSES
                                                                                                                                                                                    2.375'' to 2.75''      30486-1            30486-3             30486-4                     2.75''      30312-1           30312-3       30312-4
                                                                            SIZE                        PART NUMBER                            NITRILE HUMP HOSES                                                                                                             3''         30435-1           30435-3       30435-4
                                                                                                                                                                                    2.5'' to 2.75''        30439-1            30439-3             30439-4
                                                                            2'' to 2.25''                 PN 30196                               SIZE             PART NUMBER                                                                                                 3.25''      30628-1           30628-3       30628-4
                                                                                                                                                                                    2.5'' to 3''           30440-1            30440-3             30440-4   HUMP HOSES
                                                                            2'' to 2.5''                  PN 30206                               3''                 PN 30215                                                                                                 3.5''       30629-1           30629-3       30629-4
                                                                                                                                                                                    2.75'' to 3''          30487-1            30487-3             30487-4
                                                                            2.5'' to 3''                  PN 30213                               4''                 PN 30220                                                                                                 4''         30630-1           30630-3       30630-4
                                                                                                                                                                                    3'' to 3.25''          30642-1            30642-3             30642-4
                                                                            2.75'' to 3''                 PN 30197                               5''                 PN 30222       3'' to 3.5''           30499-1            30499-3             30499-4
                                                                            2.75'' to 4''                 PN 30192
                                                                                                                                                                                    3'' to 4''             30502-1            30502-3             30502-4
                                                                            3'' to 4''                    PN 30188                                                                                                                                          SILICONE HOSE
                                                                                                                                                                                    3.25'' to 4''          30639-1            30639-3             30639-4
                                                                            4'' to 5''                    PN 30219
                                                                                                                                                                                    3.5'' to 4''           30640-1            30640-3             30640-4
                                                                                                                                                                                                                                                            COUPLING (HD .188” WALL, 60 PSI)
                                                                                                                                                                                                                                                             SIZE         3 FOOT STICKS       3'' COUPLINGS
                                                                                                                                                                                                                                                             1''            30353-100              30281
                                                                                                                                                                                                                                                             1.5''          30353-150              30896
                                                                                                                                                                                                                                                             2''            30353-200              30282
                                                                                                                                                                                                                                                             2.25''         30353-225              30283
                                                                                                                                                                                                                                                             2.375''        30353-238              30305
                                   SPECIAL NITRILE CONNECTORS                                                                                                                                                                                                2.5''          30353-250              30284
                                    SIZE                  DESCRIPTION                       PART NUMBER                                                                                                                                                      2.75''         30353-275              30285
                                    3'' to 4''            Transition 90°                     PN 30191                                                                                                                                                        3''            30353-300              30286
                                    2.75'' to 3''        Close Radius 90°                    PN 30194                                                                                                           90° ELBOWS                                   3.25''         30353-325              30287                  HOSE
                                    3'' to 3''           Close Radius 90°                    PN 30193                                                                                                                                                        3.5''          30353-350              30453                COUPLINGS
                                    3'' to 3'' to 3''           “T”                          PN 30195                                                                             SILICONE 90° ELBOWS                                                        4''            30353-400              30303
                                    4'' to 4'' to 4''           “T”                          PN 30198                                                                              SIZE                  BLUE                 RED                BLACK
                                                                                                                                                                                   2''                  30447-1              30447-3             30447-4
                                                                                                                                                                                                                                                            SILICONE HOSE COUPLINGS
                                                                                                                                                                                   2.25''               30448-1              30448-3             30448-4    (STD .125'' WALL, 30 PSI)
                                                                                                                                                                                   2.375''              30450-1              30450-3             30450-4     SIZE             BLUE                  RED                BLACK
                                                                                                                                                                                   2.5''                30449-1              30449-3             30449-4     2''            30128-1            30128-3                 30128-4
                                                                                                                                                                                   2.75''               30451-1              30451-3             30451-4     2.25''         30161-1            30161-3                 30161-4
                                                                                                                                                                                   3''                  30452-1              30452-3             30452-4     2.375''        30304-1            30304-3                 30304-4
                                      T-BOLT CLAMPS HEAVY-DUTY STAINLESS STEEL                                                                                                     3.25''               30634-1              30634-3             30634-4     2.5''          30172-1            30172-3                 30172-4
                                      Much stronger than conventional “Worm-Drive” clamps! Inner band                                                                              3.5''                30635-1              30635-3             30635-4     2.75''         30129-1            30129-3                 30129-4
                                                                                                                        T-BOLT CLAMPS                                              4''                  30636-1              30636-3             30636-4     3''            30162-1            30162-3                 30162-4
                                      protects hose from extrusion. .75" wide. Includes self locking nut.                  PART NO.        HOSE ID      SIZE RANGE (DIA)                                                                                     3.25''         30641-1            30641-3                 30641-4
                                                                                                                           30275-150        1.50''        1.44''-1.58''                                                                                      3.5''          30482-1            30482-3                 30482-4
                                                                                                                           30275-155        1.50''        1.69''-1.94''                                                                                      4''            30302-1            30302-3                 30302-4
                                                                                                                           30275-175        1.75''        1.94''-2.25''
                                                                                                                           30275-200        2.00''        2.19''-2.44''                                                                                     SILICONE HOSE STICKS
                                                                                                                           30275-225        2.25''        2.44''-2.75''                                                                                     (3' LONG, STD .125'' WALL 30 PSI)
                                                                                                                           30275-238        2.38''        2.58''-2.83''                                                                                      SIZE            BLUE                 RED                    BLACK
                                                                                                                           30275-250        2.50''        2.63''-2.94''                                                                                      1.5''        30352-150-B         30352-150-R             30352-150-BK
                                                                                                                           30275-275        2.75''        2.94''-3.25''           SILICONE                                                                   1.75''       30352-175-B         30352-175-R             30352-175-BK
                                                                                                                           30275-300        3.00''        3.19''-3.50''           45° ELBOWS                                              45° ELBOWS         2''          30352-200-B         30352-200-R             30352-200-BK
              turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                        turboneticsinc.com
                                                                                                                           30275-325        3.25''        3.44''-3.80''                                                                                      2.25''       30352-225-B         30352-225-R             30352-225-BK
                                                                                                                           30275-350        3.50''        3.69''-4.00''             SIZE                 BLUE                  RED                 BLACK     2.375''      30352-238-B         30352-238-R             30352-238-BK
                                                                                                                           30275-400        4.00''        4.19''-4.50''                                                                                      2.5''        30352-250-B         30352-250-R             30352-250-BK
                                                                                                                                                                                    2''                 30441-1              30441-3              30441-4
                                                                                                                           30275-450        4.50''        4.50''-4.81''                                                                                      2.75''       30352-275-B         30352-275-R             30352-275-BK
                                                                                                                                                                                    2.25''              30442-1              30442-3              30442-4
                                                                                                                           30275-500        5.00''        5.19''-5.50''                                                                                      3''          30352-300-B         30352-300-R             30352-300-BK
                                                                                                                                                                                    2.375''             30443-1              30443-3              30443-4
                                                                                                                           30275-550        5.50''        5.50''-5.81''                                                                                      3.25''       30352-325-B         30352-325-R             30352-325-BK
                                                                                                                                                                                    2.5''               30444-1              30444-3              30444-4
                                                                                                                                                                                    2.75''              30445-1              30445-3              30445-4    3.5''        30352-350-B         30352-350-R             30352-350-BK
                                                                                                                                                                                    3''                 30446-1              30446-3              30446-4    4''          30352-400-B         30352-400-R             30352-400-BK
                                                                                                                                                                                    3.25''              30631-1              30631-3              30631-4
                                                                                                                                                                                    3.5''               30632-1              30632-3              30632-4
                                                                                                                                                                                    4''                 30633-1              30633-3              30633-4


     52                                                                                                                                                                                                                                                                                                                              53
                                   FLANGES & GASKETS                                                                                                                                                                    FLANGES & GASKETS




                                                                                                                                                                                                                                                                                                  ACCESSORIES
ACCESSORIES


                                    GASKETS                                                         FITTINGS                                                   FLANGES                                                 TEFLON® / STAINLESS STEEL BRAIDED LINES
                                                                                                                                                               RaceGate Flange PN 20397
                                    T3 Turbine Inlet Gasket, Stainless Steel PN 30263                 3/8" NPT x 5/8" Hose Fitting Straight PN 30133                                                                   Oil Supply Hose ass’y, -4AN Female Swiv. Ends, 12" PN 31012
                                                                                                      3/8" NPT x 5/8" Hose Fitting, 90° PN 30134               RaceGate Flange, Stainless Steel PN 20397S
                                    T3 4 Bolt Turbine Discharge Gasket, Stainless Steel PN 21467                                                                                                                       Oil Supply Hose ass’y, -4AN Female Swiv. Ends, 12" PN 31013
                                                                                                      1/2" NPT x 5/8" Hose Fitting, Straight PN 30244          Godzilla Flange, Steel PN 20507S
                                    (Fits T3 4-Bolt & K-26 Housings)
                                                                                                      1/2" NPT x 5/8" Hose Fitting 45° PN 30816                Godzilla Flange, Aluminum PN 20507A                     Oil Supply Hose ass’y, -3AN Female Swiv. Ends, 12" PN 31014
                                    T4 Turbine Inlet Gasket, Stainless Steel PN 30143
                                                                                                      1/2" NPT x 5/8" Hose Fitting, 90° PN 30245               GN Discharge Flange PN 20248                            Oil Supply Hose ass’y, -3AN Female Swiv. Ends, 12" PN 31015
                                    T4 Turbine Inlet Gasket (Divided) PN 30143-DIV
                                                                                                      1/8" NPT x 5/32" Hose Straight PN 30306                  Oil Drain Flange T3/T4, 1/2" NPT PN 20259
                                    T4 Turbine Discharge Gasket PN 30142                                                                                                                                               Oil Supply Hose ass’y, SS/ Teflon®, -3AN Female Swiv. Ends, 36" PN 10721
                                                                                                      1/8" NPT x 5/32" Hose, 90° PN 30307                      Oil Drain Flange T3/T4, 1/2" NPT, Billet PN 20259B
                                    T4 Turbine Discharge Gasket, Stainless Steel PN 30142S                                                                                                                             Oil Supply Hose ass’y, SS/ Teflon®, -3AN Female Swiv. Ends, 48" PN 10722
                                                                                                      1/8" NPT x 1/4" Hose, 90° PN 30324                       Y2K/Thumper/Mid Frame Oil Drain Flange PN 21521
                                    T3/T4 Oil Inlet Gasket PN 30238                                   5/32" Hose x .156" Hose x 5/32" Hose, “T” PN 30308       Swing Valve Discharge Flange PN 20368                   Oil Supply Hose ass’y, SS/ Teflon®, -3AN Female Swiv. Ends, 60" PN 10723
                                    T3/T4 Oil Drain Gasket PN 30141                                   O2 Sensor Bung, 18mm x 1.50mm Pitch PN 20587             Evolution Block-off Flange PN 20251                     Oil Supply Hose ass’y, SS/ Teflon®, -4AN Female Swiv. Ends, 36" PN 10724
                                    Thumper Gasket Kit PN 10794                                       O2 Sensor Bung, 18mm x 1.50mm Pitch,
                                                                                                                                                               Oil Inlet Y2K/Thumper/Mid Frame 1/4" PN 21520
                                                                                                      S.Steel PN 20587S                                                                                                Oil Supply Hose ass’y, SS/ Teflon®, -4AN Female Swiv. Ends, 48" PN 10725
                                    (Includes Oil Inlet, Drain & Turbine Inlet)
                                                                                                      Oil Drain Weld Bung, 1/2" NPT, Aluminum PN 20580A        Oil Inlet Flange T3/T4 PN 30500
                                    Evolution “Fire-Ring” Flange Gasket PN 20142                                                                                                                                       Oil Supply Hose ass’y, SS/ Teflon®, -4AN Female Swiv. Ends, 60" PN 10726
                                                                                                      Oil Drain Weld Bung, 1/2" NPT, Steel PN 20580S           Adaptor HKS To NewGen PN 20613
                                    Racegate “Fire-Ring” Flange Gasket PN 20396
                                                                                                      O2 Extension Bung (Long) PN 21376                        Adaptor Evolution To NewGen PN 20614
                                    Pressure Plenum (PN 20200) Flange Gasket PN 20217                 3.62" 18mm x 1.50 Pitch                                                                                          All stainless steel braided lines are highly
                                                                                                                                                               Adaptor Racegate To NewGen PN 20615
                                                                                                                                                                                                                       temperature resistant and feature air
                                                                                                      O2 Extension Bung (Short) PN 21376-1
                                    Godzilla Discharge Horn Gasket PN 20510                                                                                    Oil Filter Replacement PN 20754                         craft quality fittings.
                                                                                                      2.30" 18mm x 1.50 Pitch

                                    FLANGES
                                                                                                                                                             OIL LINE FITTINGS
                                    T3 Turbine Inlet Flange, Drilled PN 20365                         T4 Turbine Discharge Flange, 2.5" Hole Dia. PN 20168
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -3AN, short PN 30544              Oil Line Fitting, 1/8" NPT x -4AN, 90° PN 30554
                                    T3 Turbine Inlet Flange, Stainless Steel PN 20365S                T4 Turbine Discharge Flange, 2.5" Hole Dia.
                                                                                                      Stainless Steel PN 20168S                              Oil Line Fitting, 1/8" NPT x -3AN, medium PN 30545             Oil Line Fitting, 1/4" NPT x -4AN, 90° PN 30555
                                    T3 Turbine Inlet Flange, Tapped M10 PN 20980
                                                                                                      T4 Turbine Discharge Flange, 3'' Hole Dia. PN 20174    Oil Line Fitting, 1/8" NPT x -4AN, short PN 30546              Adapter Fitting, 1/8" MPT x 1/4" FPT M10x1.00 x-3 PN 30556
                                    T3 5-Bolt Turbine Discharge Flange PN 20367
                                                                                                      T4 Turbine Discharge Flange, 3'' Hole Dia.             Oil Line Fitting, 1/4" NPT x -4AN, PN 30547                    Adapter Fitting, 1/4" MPT x 1/8" FPT M10x1.25 x-3 PN 30557
                                    T3 5-Bolt Turbine Discharge Flange, Stainless Steel PN 20367S     Stainless Steel PN 20174S
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -3AN, 45° PN 30548                Adapter Fitting, M10x1.00 x -3AN PN 30558
                                    T3 4-Bolt Discharge Flange PN 21418                               Dodge 5.9 Stage II Turbo Adaptor Flange PN 21476
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -4AN, 45° PN 30549                Adapter Fitting, M10x1.25 x -3AN PN 30559
                                    T3 4-Bolt Turbine Discharge Flange, Stainless Steel PN 21418S
                                                                                                      Evolution Flange, Drilled PN 20260
                                                                                                                                                             Oil Line Fitting, 1/4" NPT x -4AN, 45° PN 30550                Adapter Fitting, M10 x1.50 x -3AN PN 30560
                                    T4 Turbine Inlet Flange, Drilled PN 21102
                                    T4 Turbine Inlet Flange, Tapped M10 PN 21103                      Evolution Flange, Drilled, Stainless Steel PN 20260S
              turboneticsinc.com




                                                                                                                                                                                                                                                                                                     turboneticsinc.com
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -3AN, 90°, short PN 30551         Oil Line Fitting, 1/2" NPT x 1/2" NPT, 45° PN 30561

                                    T4 Turbine Inlet Flange, 2.25'' Hole Dia. PN 20167                Evolution Flange, Tapped 5/16''-18 PN 20261
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -3AN, 90°, medium PN 30552        Oil Line Fitting, Adaptor (T) 1/8" NPT M x F x F PN 30562

                                    T4 Turbine Inlet Flange, Stainless Steel PN 20167S                Evolution Flange, Tapped M8 PN 20981
                                                                                                                                                             Oil Line Fitting, 1/8" NPT x -3AN, 90°, long PN 30553

                                                                                                      Evolution Flange, Tapped,
                                                                                                      Stainless Steel PN 20261S


     54                                                                                                                                                                                                                                                                                           55
                               INTERCOOLER INTRODUCTION                                                                                                                                                                                             INTERCOOLERS




                                                                                                                                                                                                                                                                                                                   SPEARCO
SPEARCO




                               SPEARCO
                               INTERCOOLERS

                               Conventional intercooler cores are thin-walled, extruded aluminum
                               tubes that are not designed to handle extreme boost pressures, and
                               limit cooling performance because of their narrow width. W.A.V.E.
                               Technology Cores utilize the latest design advances in strength and
                               durability and maximize cooling effectiveness through a greater
                               surface area. Wider is better!
                                                                                                                                                      Turbonetics, INC., home of Spearco racing intercoolers, is proud   In addition to the standard cores as listed herein, Spearco
                                                                                                                                                      to offer this new catalog section, which is completely             can manufacture special size bar and plate style cores in
                                                                                                                                                      revised and provides more application information than ever        thicknesses of 1.25", 2.0", 2.25", 3.0", 3.5", 4.0", 4.5", and
                                                                                                                                                      before. The air/liquid section has been enlarged and               6.0". Contact Spearco for any special size requirements.
                                                                                                                                                      includes a greater selection of dimensional drawings and
                                                                                                                                                                                                                         For custom fabrication, fax your specs on the Custom
                                                                                                                                                      other data with regard to air/liquid intercoolers in drag
                                                                                                                                                                                                                         Intercooler Specification Fax Form available on the web at
                                                                                                                                                      racing applications.
                                                                                                                                                                                                                         www.spearcointercoolers.com.
                                                                                                                                                      In addition to the various cast-aluminum manifolds shown
                                                                                                                                                      in this catalog, which are used on a variety of cores by
                                                                                                                                                      cutting their length to match the core, Spearco can also
                                                                                                                                                      fabricate special manifolds from aluminum sheet and
                                                                                                                                                      channel for special applications to fit all intercooler
                                                                                                                                                      installation requirements. Pictured in this catalog are some
                                                                                                                                                      of the special intercooler assemblies which have been
                                                                                                                                                      produced for race, offroad, industrial, marine, and other
                                                                                                                                                      applications. Spearco can fabricate to customer
                                                                                                                                                      specifications or sketches and also offers complete
                                                                                                                                                      engineering assistance for intercooler design and application.




                                                                                                                                                                                                                         All of Spearco’s intercoolers are welded by certified technicians, trained to fabricate
                                                                                                                                                                                                                         and build air-to-air and liquid-to-air assemblies to your exact specifications.




                                 W.A.V.E. Technology (Wide Area Vane Effectiveness)                  Spearco’s Pat. Pending manufacturing process
                                 is the ultimate combination in strength and                         these unique cores are capable of comfortably
                                 efficiency in heat exchanger cores. Specifically                    withstanding pressures in excess of 200+ psi.
                                 designed to maximize cooling by utilizing the most                  W.A.V.E. Technology cores set the standard for
                                 surface area possible in a given space. The Spearco                 high-pressure forced-induction durability and
                                 W.A.V.E. core incorporates a complex network of                     cooling effectiveness. Whether you are a high
                                 highly effective vanes to regularly decrease                        performance enthusiast or a Pro Drag racer
                                 temperatures by as much as 30º over conventional                    seeking the peace of mind to make the next
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                     turboneticsinc.com
                                 tube n’ fin units. In addition to their phenomenal                  round the W.A.V.E. Technology intercoolers and
                                 cooling ability, W.A.V.E. Technology cores are                      radiators are for you.
                                 manufactured to be “BOMB PROOF”. Due to




   56                                                                                                                                                                                                                                                                                                              57
                               INTERCOOLER KITS                                                                                                                                                                                              INTERCOOLER KITS




                                                                                                                                                                                                                                                                                                         SPEARCO
SPEARCO


                                                                                                                                                                   DODGE NEON SRT-4 UPGRADE INTERCOOLER
                               1990-1996 TOYOTA MR2                                                                                                                A true high performance factory upgrade. This bolt-on              bolt-on without any modifications or cutting to the vehicle. The
                               TURBOCHARGED INTERCOOLER UPGRADE KIT                                                                                                intercooler features a W.A.V.E. Technology core which allows       Stage-II kit will require the removal of the factory bumper
                               This intercooler upgrade features a massive 6" X 5.9" X 11.75"     tubes, brackets, intercooler and fan. No cutting is required.    maximum efficiency and low pressure drops. Unique end tank         reinforcement bar. Approximate install time 1-2 hours.
                               core in conjunction with a 440 CFM SPAL fan for optimum            Installation time is approximately 3 hours. This kit is          design allows boost pressure to evenly distribute throughout
                               performance. This design offers very low pressure drop and         guaranteed to outperform any other kit on the market.            the entire core, maximizing the entire surface area of the core.
                               extremely low charge temperature. Complete kit includes all                                                                         5hp gains on the Stage-I unit and as much as 15hp gain on the
                                                                                                                                                                   Stage-II unit by just bolting them on. Both units are a direct




                                                                                                                                                                                                                Stage I
                                                                                                                                                                                                               PN 2-475                                               Stage II
                                                                                                                                                                                                                                                                     PN 2-476
                                                                                                                       PN 2-442 Turbocharged MR-2 1990-1996


                                                                                                                                                                   SUBARU WRX/STi INTERCOOLER UPGRADE KIT
                                                                                                                                                                   Spearco’s WRX intercooler kit features the largest air-to-air      results have shown performance improvements of up to
                                                                                                                                                                   top-mount intercooler in the market. Utilizing the factory         15 horsepower when compared to the stock intercooler. This
                                                                                                                                                                   mounting points, the massive 4.5"-thick unit bolts on easily       kit comes complete with clamps and silicone hose. Boost
                               TOYOTA SUPRA 7MGT-E                                                                                                                 without any modifications to the vehicle. Factory turbo piping     pressure can now be increased without the horsepower-
                               INTERCOOLER UPGRADE KIT                                                                                                             and blow-off valve can be bolted on easily with standard hand      robbing effects of the extreme charge temperatures normally
                               This is a bolt-on, high-performance intercooler upgrade using a    the larger, oversize intercooler core assembly, all necessary    tools. The massive 1,000 CFM intercooler offers a very low         associated with compressed intake air.
                               very high flow core, rated at 1080 CFM. This replacement core      hardware, tubing, elbows and hoses as shown for installation     pressure drop and extremely low charge temperatures. Dyno
                                                                                                                                                                                                                                                                                      WRX PN 2-450
                               assembly offers a 24% decrease in pressure drop, as well as a      and connection into existing factory piping system with simple                                                                                                                       STi PN 2-451
                               22% increase in heat rejection. The kit includes, in addition to   hand tools. Approximate installation time is 3 to 4 hours.                                                                                                  (Raptor bypass not included) PN 10903
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                           turboneticsinc.com
                                                                                                                     PN 2-142 Toyota Supra 1987-1992
                                                                                                                           CARB EO# D-140-22



   58                                                                                                                                                                                                                                                                                                    59
                               INTERCOOLER KITS                                                                                                                                                                                              INTERCOOLER KITS




                                                                                                                                                                                                                                                                                                       SPEARCO
SPEARCO


                               FORD LIGHTNING HEAT EXCHANGER UPGRADE KIT                                                                                             TOYOTA SUPRA 1994-98 INTERCOOLER UPGRADE KIT
                               This factory replacement heat exchanger provides unequalled       the factory Ford heat exchanger hold back your performance.
                                                                                                                                                                     This system features a large, high capacity, front-mount          only minor trimming to the front bumper. Whether you are
                               temperature reduction with virtually no pressure drop.            You need to upgrade to performance parts that live up to the
                                                                                                                                                                     intercooler with our newest W.A.V.E. technology. Maximum          using this kit with your stock turbos or with an aftermarket
                               Constructed with Spearco’s W.A.V.E. Technology core, do not let   same potential as your engine. Easy to install in 1-2 hours.
                                                                                                                                                                     intercooler efficiency and low pressure drop is obtained          system, the intercooler will support well over 600hp.
                                                                                                                                                                     through our unique and proprietary fin design. Kit includes all   Intercooler pipe features a mounting flange for Turbonetics’
                                                                                                                                                                     pipes and mounting hardware for a direct fit application with     Raptor blow-off valve that is also included with this system.




                                                                                                                                               PN 2-482




                                                                                                                                                                                                                                                               PN 2-460



                                                                                                                                                                     EVO VIII INTERCOOLER UPGRADE
                               SUBARU LEGACY INTERCOOLER UPGRADE
                                                                                                                                                                     This direct bolt-on high performance intercooler upgrade          increasing cooling efficiency and dramatically reducing
                               The Subaru Legacy wagon lives up to the family crest by           reduces the intake charge temp and allows you to turn the
                                                                                                                                                                     features the same W.A.V.E. Technology as used in all the other    pressure drop. The W.A.V.E. Technology core is capable of
                               making lots of power in a real sleeper vehicle. Blow the doors    boost up to see the true potential of this engine. Designed to be
                                                                                                                                                                     high horsepower race cars. This intercooler is also the largest   dropping temperatures by as much as 220º F. Kit includes all
                               off those other sports cars when you bolt-on the new Spearco      a direct factory replacement, the Spearco assembly drops right
                                                                                                                                                                     intercooler you can fit without any modification or cutting to    heavy duty T-bolt clamps and silicone hose needed for
                               top mount intercooler. The W.A.V.E. Technology core provides      into place in less than 2 hours of install time.
                                                                                                                                                                     the vehicle. All factory mounting brackets are retained.          installation. Approximate install time 1-2 hours.
                               maximum efficiency in the tight stock location and greatly
                                                                                                                                                                     Computer modeled round end tank design, center air inlet and
                                                                                                                                                                     outlets provide maximum boost pressure distribution, thus
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                         turboneticsinc.com
                                                                                                                                          PN 2-485


                                                                                                                                                                                                PN 2-470


   60                                                                                                                                                                                                                                                                                                  61
                               AIR/AIR & AIR/LIQUID INTERCOOLERS                                                                                                                                                   CONFIGURATION & CUSTOM FABRICATION




                                                                                                                                                                                                                                                                                                                                             SPEARCO
SPEARCO


                               SPEARCO STANDARD SIZE                                                                INTERCOOLER SELECTION GUIDE                                                              ASSEMBLY CONFIGURATION                     CUSTOM FABRICATION
                               AIR/AIR INTERCOOLER CORES                                                                                                                                                     CHART CAST MANIFOLDS
                                                                                                                    Below is a chart showing various engine sizes and                                                                                   Using any of the extensive line of air/air intercooler cores
                                CORE PART #            .SIZE                 FLOW RATE           ASSY. PART NO.     applications which can be used to quickly locate basic core                                                                         listed on page 42. Spearco can custom fabricate end
                                2-100         3.00" x 28.00" x 30.00"              –                  –
                                                                                                                    sizes that, from a size and flow standpoint, would                                       CHART 1 -                                  tanks, or intercooler manifolds, in an endless number of
                                2-101         3.00" x 17.70" x 30.00"              –                  –
                                                                                                                    be applicable to your specific application. The chart is                                 FOR CORES UP TO 7.9" HIGH                  configurations to fit individual specifications. Some of the
                                2-102         3.00" x 17.00" x 36.00"              –                  –
                                2-103         3.00" x 22.50" x 30.00"              –                  –
                                                                                                                    intended to give a general selection only of the cores                                                                              more common configurations are shown below. Manifolds
                                2-110         3.50" x 9.24" x 6.00"              540                2-220
                                                                                                                    that could be used in these applications. Additional sizing                                                                         can be straight or tapered with tube sizes of 1.75", 2.0",
                                                                                                                                                                                                               A                      B
                                2-111         2.25" x 8.20" x 11.20"             428                  –             information and general information on intercooling is                                                                              2.25", 2.50", 2.75", 3.0", and 4.0". In addition, the cast
                                2-112         3.00" x 20.23" x 7.00"             1080               2-300           available online at www.turboneticsinc.com in the                                                                                   manifolds shown on the previous page can be modified by
                                2-113         3.50" x 6.80" x 11.75"             320                2-222           intercooler section.                                                                                                                sawing off connections, capping, hole sawing, or welding
                                2-115         3.50" x 18.48" x 6.00"             1080               2-221                                                                                                                                               in hose connections as required.
                                2-116         3.50" x 13.60" x 11.75"            645                2-223           SPEARCO STANDARD
                                2-118         2.25" x 10.00" x 18.50"            695                2-228           AIR/LIQUID INTERCOOLER CORES                                                               C                      D
                                2-120         3.50" x 7.90" x 24.00"             740                2-238
                                2-121         3.00" x 24.30" x 7.00"               –                  –                CORE ONLY PART NO.             CORE SIZE (INCHES)                    CORE ASSEMBLY
                                2-122         3.50" x 23.25" x 24.00"              –                  –                2-104                        2.25"D x 4.65"W x 14"H                        2-278
                                                                                                                       2-105                          6"D x 8.5"W x 8.63"H                        2-276
                                2-161         3.50" x 7.90" x 12.88"             700                2-225
                                                                                                                       2-106                        3"D x 4.25"W x 17.26"H                        2-279        E                      F
                                2-167         3.50" x 15.80" x 12.88"            1050               2-226              2-107                           4.5"D x 9.3"W x 7"H                        2-275
                                2-172         3.50" x 10.40" x 10.50"            1010               2-245              2-108                         9"D x 10.125"W x 9"H                         2-261
                                2-173         4.50" x 10.50" x 16.50"            460                2-257              2-109                         4.5"D x 20.25"W x 9"H                        2-254
                                                                                                                       2-117                      4.5"D x 10.125"W x 13.5"H                       2-260                                                                        A                                        B
                                2-174         4.50" x 16.40" x 8.75"             1050               2-237
                                                                                                                       2-170                        4.5"D x 10.125"W x 9"H                        2-230
                                2-175         4.50" x 25.10" x 6.50"             920                2-239              2-171                       4.5"D x 10.125"W x 4.5"H                       2-231
                                2-176         4.50" x 26.20" x 11.0"             1200               2-233              2-200                          3.65"D x 6"W x 3.5"H                        2-252      CHART 2 -
                                2-177         4.50" x 18.50" x 6.50"             725                2-240              2-201                           3.65"D x 6"W x 7"H                         2-264      FOR CORES UP TO 9.25" HIGH
                                                                                                                       2-202                         6"D x 12"W x 13.51"H                         2-281
                                2-178         3.50" x 7.80" x 20.00"             760                2-247
                                                                                                                       2-204                       4.5"D x 4.65"W x 9.75"H                        2-320
                                2-179         4.50" x 19.70" x 20.75"            1000               2-277              2-206                         2.25"D x 4.65"W x 7"H                        2-265
                                2-180         3.50" x 13.00" x 17.25"            760                2-235              2-213                         3"D x 4.25"W x 8.63"H                        2-270
                                2-181         3.50" x 20.80" x 10.50"            1500               2-246              2-214                         6"D x 4.25"W x 8.63"H                        2-271                                                                            C                                       D
                                                                                                                       2-215                          4.5"D x 4.65"W x 7"H                        2-269
                                2-182         3.50" x 15.60" x 20.00"            1500               2-248
                                                                                                                       2-219                        12"D x 12"W x 13.51"H                         2-280            A                      B
                                2-192         3.50" x 9.50" x 12.40"             630                2-242
                                                                                                                    All of the above cores are available in multiples, see Air/Liquid Section for details.
                                2-194         3.50" x 19.00" x 12.40"            1260               2-243
                                2-195         3.50" x 9.40" x 8.375"             500                2-249
                                2-196         3.50" x 18.80" x 8.375"            1000               2-250                                                                                           A        CHART 3 -
                                2-197         4.50" x 10.93" x 18.50"            1400               2-234              A = Depth                                                                             FOR CORES UP TO 18.50" HIGH
                                2-203         3.50" x 6.52" x 24.00"             640                2-255              B = Height                                                                                                                                                                                  F
                                2-205         3.50" x 13.04" x 24.00"            1280               2-256              C = Length/Width                                                              B                                                                           E
                                2-207         3.00" x 14.20" x 18.50"            1010               2-266
                                2-208         3.50" x 6.50" x 17.25"             525                2-258
                                2-209         3.00" x 7.125" x 18.50"            670                2-262
                                2-210         6.00" x 5.90" x 11.75"             670                2-267
                                2-211         6.00" x 11.80" x 11.75"            1180               2-268
                                2-212         4.50" x 5.12" x 18.50"             790                2-263                                                                                                                                                                                                        H
                                2-216         3.50" x 10.50" x 28.00"            790                2-272                                                                                                                                                                              G
                                2-217         3.50" x 21.00" x 28.00"            1280               2-273                                                     C                                                           A
                                2-218         4.50" x 5.85" x 16.50              790                2-274
                                5-114         2.25" x 6.25" x 22.00"             695                5-245
                                                                                                                                                                                                                                                B
                                                                                                                                                                   All Air / Liquid Assemblies are
                               * First two dimensions of the core represent the charge side. The second dimension                                                  available in these configurations
                                 can be cut down to create a smaller core (in increments of one charge row and
                                 one ambient row).
                                                                                                                                                                                                                                                                                                 I
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                               turboneticsinc.com
                               ** Approximate flow rate in CFM means the core will flow the CFM shown with          WATER INLET/OUTLET CONNECTIONS ARE AVAILABLE IN:
                                  1.5PSI pressure drop. The core can flow more CFM, but the pressure drop                    1/2" NPT • 3/4" NPT • 1" NPT
                                  will be higher.                                                                                                                                                                                                       Specify tube location (top, bottom, center) and size of tube inlet and outlet.
                                 For custom applications over 1000 HP please contact your sales representative.
                                                                                                                                                                                                                                                        For the designs, fax Spearco a sketch showing the maximum space available,
                                                                                                                                                                                                                                                        tube location, tube diameter, and all details and you will receive a quote by fax.
                                                                                                                                                                                                                            HOSE INLET OPTIONS:         Fax form located on our website.
                                                                                                                                                                                                                   1.0" • 1.50" • 2.0" • 2.25" • 2.5"
                                                                                                                                                                                                                   2.75" • 3.0" • 3.5" • 4.0" • 5.0"


   62                                                                                                                                                                                                                                                                                                                                        63
                               AIR/AIR FIN CONFIGURATION                                                                                                                            AIR/AIR FIN CONFIGURATION




                                                                                                                                                                                                                                                            SPEARCO
SPEARCO




                                CORE #2-110   ASSEMBLY #2-220          CORE #2-113   ASSEMBLY #2-222          CORE #2-115   ASSEMBLY #2-221
                                                                                                                                              CORE #2-212   ASSEMBLY #2-263          CORE #2-216   ASSEMBLY #2-272          CORE #2-217   ASSEMBLY #2-279




                                CORE #2-116   ASSEMBLY #2-223          CORE #2-161   ASSEMBLY #2-225          CORE #2-167   ASSEMBLY #2-226




                                                                                                                                              CORE #2-210   ASSEMBLY #2-274          CORE #2-120   ASSEMBLY #2-238          CORE #2-112   ASSEMBLY #2-300



                                CORE #2-172   ASSEMBLY #2-245          CORE #2-173   ASSEMBLY #2-257          CORE #2-174   ASSEMBLY #2-237




                                CORE #2-175   ASSEMBLY #2-239          CORE #2-176   ASSEMBLY #2-233          CORE #2-178   ASSEMBLY #2-247
                                                                                                                                              CORE #2-110   ASSEMBLY #2-228          CORE #2-203   ASSEMBLY #2-255          CORE #2-205   ASSEMBLY #2-256




                                CORE #2-179   ASSEMBLY #2-277         CORE #2-180    ASSEMBLY #2-235          CORE #2-101   ASSEMBLY #2-246




                                                                                                                                              CORE #2-207   ASSEMBLY #2-266          CORE #2-208   ASSEMBLY #2-258          CORE #2-209   ASSEMBLY #2-262




                                CORE #2-102   ASSEMBLY #2-248          CORE #2-192   ASSEMBLY #2-242          CORE #2-194   ASSEMBLY #2-243
          turboneticsinc.com




                                                                                                                                                                                                                                                              turboneticsinc.com
                                                                                                                                              CORE #2-210   ASSEMBLY #2-267          CORE #2-211   ASSEMBLY #2-268
                                CORE #2-195   ASSEMBLY #2-249          CORE #2-196   ASSEMBLY #2-250          CORE #2-197   ASSEMBLY #2-234



                                       VISIT WWW.TURBONETICSINC.COM FOR ALL INTERCOOLER CORE DIMENSIONS AND FULL SIZE DRAWINGS.                        VISIT WWW.TURBONETICSINC.COM FOR ALL INTERCOOLER CORE DIMENSIONS AND FULL SIZE DRAWINGS.




   64                                                                                                                                                                                                                                                       65
                               UNIVERSAL AIR/AIR ASSEMBLY                                                                                 UNIVERSAL AIR/AIR ASSEMBLY




                                                                                                                                                                       SPEARCO
SPEARCO




                               5-375                                                         5-374
                               - Core Dimension                                              - Core Dimension
                                 3.50'' thick x 7.90'' tall x 28.0'' wide                      3.50” thick x 7.90” tall x 20.0” wide
                               - Hose Connection – 2.50'' OD                                 - Hose Connection – 2.50” OD

                                 500HP                                                         450HP
                                                                                                                                                     PN 5-374
                                                                             PN 5-375




                               5-364                                                         5-377
                               - Core Dimension                                              - Core Dimension
                                 3.50'' thick x 10.50'' tall x 28.0'' wide                     3.50'' thick x 7.90'' tall x 20.0'' wide
                               - Hose Connection – 3.0'' OD                                  - Hose Connection – 2.50'' OD
                                 650HP                                                         450HP
                                                                                                                                                     PN 5-377
                                                                               PN 5-364




                               5-312                                                         5-378
                               - Core Dimension                                              - Core Dimension
                                 3.50'' thick x 10.50'' tall x 24.0'' wide                     3.50'' thick x 7.90'' tall x 24.0'' wide
                               - Hose Connection – 3.0'' OD                                  - Hose Connection – 2.50'' OD
                                                                                               550HP
                                 550HP                                                                                                               PN 5-378



                                                                               PN 5-312




                               2-221A-3C                                                     2-379
                               - Core Dimension                                              - Core Dimension
                                                                                               3.50'' thick x 7.90'' tall x 28.0'' wide
          turboneticsinc.com




                                 3.50'' thick x 18.48'' wide x 9.0'' tall




                                                                                                                                                                         turboneticsinc.com
                               - Hose Connection – 2.50'' OD                                 - Hose Connection – 2.50'' OD
                                 760HP                                                         500HP
                                                                                                                                                      PN 2-379



                                                                              PN 2-221A-3C



   66                                                                                                                                                                  67
                               LIQUID INTERCOOLER GUIDE                                                                                                                                                                                      LIQUID INTERCOOLER GUIDE




                                                                                                                                                                                                                                                                                                                                    SPEARCO
SPEARCO


                               AIR-TO-LIQUID INTERCOOLERS                                                                                                                               DRAG RACING WITH AIR-TO-LIQUID INTERCOOLERS
                               Spearco offers basic air/liquid intercooler cores that can be                                                                                            There are diverse opinions about the advantage of air/liquid        Now, consider a drag car using an air/liquid intercooler
                               combined in a large variety of ways to suit intercooler needs on                                                                                         intercoolers versus air/air intercoolers in drag racing             circulating ice water. The pump is turned on before the burn
                               Roots or Centrifugal superchargers and turbochargers. Refer to                                                                                           applications. Some say there is no advantage over air/air           out and when you leave the line the charge temperature will
                               the detailed drawings.                                                                                                                                   and they also say if there is an advantage it is offset by the      remain more stable throughout the run and the charge
                                                                                                                                                                                        added weight.                                                       temperature can actually be much lower than ambient
                               Air/liquid intercoolers operate by pumping cooled water through
                                                                                                                                                                                                                                                            temperature, (depending on the size of the intercooler). A
                               the cores either from a front-mounted radiator or heat                                                                                                   The real facts are that other than a small additional weight
                                                                                                                                                                                                                                                            properly sized air/liquid intercooler could easily give a charge
                               exchanger or chilled water produced by circulating the liquid                                                                                            factor, a proper application of an air/liquid intercooler will
                                                                                                                                                                                                                                                            temperature of 60˚ (on a 90˚ day!), which would be 60˚ lower
                               through a container filled with ice, as used in drag racing.                                                                                             increase power more than enough to offset any additional
                                                                                                                                                                                                                                                            than the air/air unit. This reduction in charge temperature not
                               Depending on engine size and heat load, we recommend a                                                                                                   weight, and will always yield superior performance over an
                                                                                                                                                                                                                                                            only gives a significant increase in power and torque, but also
                               container that will hold a minimum of 12 pounds of ice. If a front                                                                                       air/air unit. In addtion, the additional weight is sometimes
                                                                                                                                                                                                                                                            allows the use of more aggressive ignition timing for even
                               radiator is used, this should be as large as possible since the                                                                                          needed for ballast, eliminating this disadvantage. To
                                                                                                                                                                                                                                                            greater increases in power.
                               temperature of the liquid entering the intercooler determines                                                                                            understand why air/liquid intercoolers are superior for drag
                               the cooling effectiveness. We recommend a radiator as used on                                                                                            racing, consider that the cooling medium in an air/air
                               small automobiles with a minimum surface area of at least 260                                                                                            intercooler is the ambient temperature of the outside air at
                               sq. inches. Radiator technology is preferable rather than oil                                                                                            any given time. If we have an engine running at 30 PSI of
                               cooler technology as these are specifically designed to cool                                                                                             boost pressure, with an ambient temperature of 90˚F
                               water/glycol. When these intercoolers are used with chilled                                                                                              depending on compressor efficiency, the discharge
                               water, it is possible, in some cases, to get charge temperatures                                                                                         temperature will be approximately 400˚.
                               below ambient temperature, therefore remarkable increases in                                                                                             Assume that you have an air/air intercooler that can give 90%
                               air density and power are possible.                                                                                                                      effectiveness at over 100mph and less at lower vehicle
                                                                                                                                                                                        speeds. 90% at the above condition will give a temperature
                                                                                                                                                                                        out of the intercooler of approximately 120˚F., and higher
                                                                                                                                                                                        temperature out at lower speeds due to lower cooling and
                               SPEARCO WATER PUMP                                                    CORE EFFICIENCY CHART                                                              velocity across the surface of the core. Additionally, you are
                               Spearco’s new water pump features all the latest technology in         PART NO.      COOLING LIQUID ˚F       CFM          TEMP OUT ˚F         P DROP     leaving the line with a hot intercooler caused by heating
                               water pump design. New lightweight ABS body construction (as             2-230               45              700                81                 .18   during burn out.
                               compared to the previous bronze body) coupled with the new                 45               1100             111               .37
                               magnetic-drive system offers you superb flow capacity for all
                                                                                                          45               1500             137               .70                                                                                                                      PN 2-280
                               your intercooling needs. The hose barbs are now incorporated
                                                                                                         110               700              137               .18
                               as part of the ABS body design eliminating additional barb                                                                                                                                                                   FOR DRAG RACING: Ice/liquid reservoir size depends on engine size and
                               fittings. This new unit operates quieter, cooler, and draws less          110               1100             161               .37                                                                                           horsepower, however a rough estimate is shown below:
                               amperage as compared to its previous counterpart without                  110               1500             182               .70                       AIR/LIQUID INTERCOOLER RECOMMENDATIONS
                               sacrificing flow. Produces an estimated 6- to 8-gpm at the               2-231               45              450               116                 .05
                               waterside head pressure.                                                                                                                                 ENGINE SIZE                             HIGH PERFORMANCE   RACING   RESERVOIR CAPACITY
                                                                                                          45               700              148               .10                                                                     STREET
                                                                                                                                                                                                                                                              1.5 to 3.0 liters   3 lbs ice plus 2 gallons liquid (600 cu. in.)
                                                                                                         110               450              165               .05                       1.6 Litre (100 CID) to 2.3 Liter (140 CID)   2-252         2-230
                                                                                                                                                                                                                                                              3.1 to 4.5 liters   6 lbs ice plus 2 gallons liquid (800 cu. in.)
                                                                                                         110               700              191               .10                                                                    2-265         2-231      4.6 liters and up   12 lbs ice plus 3 gallons liquid (1200 cu. in.)
                                                                                                        2-261               45              1400               81                 .18                                                2-270         2-271
                                                                                                          45               2200             111               .37                       2.4 Litre (146 CID) to 4.0 Liter (245 CID)   2-230         2-230
                                                                                                          45               3000             161               .70                                                                    2-231         2-231
                                                                                                         110               1400             137               .18
                                                                                                                                                                                                                                     2-269         2-269
                                                                                                         110               2200             161               .37
                                                                                                                                                                                                                                     2-271         2-271
                                                                                                         110               3000             182               .70
                                                                                                                                                                                                                                     2-275
                                                                                                        2-252*              45              270               121             .15PSI
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                      turboneticsinc.com
                                                                                                                                                                                                                                     2-276
                                                                                                         130               270              176              .15PSI
                                                                                                                                                                                        4.1 Litre (250 CID) to 7.5 Liter (460 CID)   2-230         2-219
                                                                                                          45               450              141              .25PSI
                                                                                                                                                                                                                                     2-269         2-230
                                                 PN 2-1441                                               130               450              189              .25PSI
                                                                                                                                                                                                                                     2-271         2-261
                                                                                                    * Performance based on boost pressure of 15 PSI, inlet temperature of 275˚F
                                                                                                                                                                                                                                     2-275
                                                                                                    Performance rate calculated with 30 PSI boost, 400˚ inlet temperature and
                                                                                                    100˚ or 45˚ cooling liquid. When used at lower boost levels, temperature                                                         2-276
                                                                                                    reduction will be less.



   68                                                                                                                                                                                                                                                                                                                               69
                               LIQUID INTERCOOLERS                                                                                                                                                                                            LIQUID INTERCOOLERS




                                                                                                                                                                                                                                                                                                                SPEARCO
SPEARCO


                                PART NO. 2-252                                                      PART NO. 2-270
                                                                                                                                                                         PART NO. 2-230                                                        PART NO. 2-254
                                Effective on engines up to 2.6L (160 CID) or 450 CFM. Available
                                                                                                                                                                                                                                               For high horsepower racing engines up to 2500hp.
                                in configurations A or B.
                                                                                                                                                                         Effective on engines up to 7.4L (454 CID) or 1500 CFM.                Available as shown or it can be fabricated to suit your
                                                                                                                                                                         Available in configurations A, B, or C shown below.                   dual supercharger or turbocharger applications.
                                                                                                                                                                         Air manifold outlet 3" OD. Core only:




                               HORSEPOWER                                                         HORSEPOWER                                                           HORSEPOWER                                                             HORSEPOWER
                                 350                                                                400                                                                 1000                                                                   2000
                                 PART NO. 2-265                                                     PART NO. 2-231                                                       PART NO. 2-276                                                         PART NO. 2-259
                                                                                                    Effective on engines up to 4.2L (260 CID) or 700 CFM. Available                                                                             For high horsepower racing engines up to 2500hp. Available as
                                                                                                    in configurations A or B shown below. Air manifold outlet 3" OD.                                                                            shown or it can be fabricated to suit your dual supercharger
                                                                                                                                                                                                                                                or turbocharger applications.




                               HORSEPOWER                                                         HORSEPOWER                                                           HORSEPOWER                                                             HORSEPOWER
                                 400                                                                500                                                                 1000                                                                   2000
                                 PART NO. 2-278                                                     PART NO. 2-269                                                       PART NO. 2-275
                                                                                                                                                                                                                                                PART NO. 2-261
                                                                                                                                                                                                                                                For high horsepower racing engines up to 2500hp.
                                                                                                                                                                                                                                                Available as shown or it can be fabricated to suit.




                               HORSEPOWER                                                         HORSEPOWER                                                           HORSEPOWER                                                             HORSEPOWER
                                 500                                                                600                                                                 1000                                                                   2200
                                 PART NO. 2-271                                                     PART NO. 2-279                                                       PART NO. 2-260                                                         PART NO. 2-280

                                                                                                                                                                                                           This configuration is arranged
                                                                                                                                                                                                           so it can be mounted on top of
                                                                                                                                                                                                           the intake manifold on high
                                                                                                                                                                                                           performance V-8 racing engines
                                                                                                                                                                                                           with centifugal superchargers,
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                  turboneticsinc.com
                                                                                                                                                                                                           custom fabricated with or with-
                                                                                                                                                                                                           out mounting flanges in 2, 3, or
                                                                                                                                                                                                           4 core arrangement. This set-up
                                                                                                                                                                                                           gives excellent results using
                               HORSEPOWER                                                         HORSEPOWER                                                           HORSEPOWER                          circulated ice water with          HORSEPOWER
                                 600                                                                800                                                                1200                                extremely low pressure drop.
                                                                                                                                                                                                                                               3000


   70                                                                                                                                                                                                                                                                                                           71
                               WATER/ALCOHOL INJECTION SYSTEM                                                                                                                                                                              INTERCOOLER MANIFOLDS & CASTINGS




                                                                                                                                                                                                                                                                                                                                                             SPEARCO
SPEARCO


                                WIS – WATER / ALCOHOL INJECTION SYSTEM                                                                                                                                                       INTERCOOLER MANIFOLDS                                               ALUMINUM ELBOWS
                                The system is comprised of a dash-mounted controller and a                               It is user adjustable between 1.5-4.5V. Adjustment to this
                                high-pressure diaphragm pump designed to receive a Pulse                                 potentiometer will determine the starting point of the water
                                Width Modulation (PWM) signal from the controller.                                       injection system. As shown in the chart below, 1.5V of a 2
                                                                                                                                                       bar MAP sensor represents
                                The pump can be used with a
                                                                                                                                                       approximately 0.4 bar below
                                high concentration of alcohol
                                                                                                                                                       atmosphere (vacuum), while
                                (75%) as well as just water
                                                                                                                                                       a 3 bar sensor represents                                              1-990
                                alone; this is particularly                                                                                                                                                                                                                                       2-420
                                                                                                                                                       almost atmospheric pressure.
                                useful for applications where                                                                                                                                                                 3.5"W X 2.7"H X 9.25"L - 2.25" OD hose connection extends 1.1"
                                alcohol can enhance the fuel                                                                              The injection % range is set by                                                     beyond core in length. Mounting bosses on top and end.              4" Elbow
                                octane or just as additional                                                                              the ‘GAIN’ potentiometer on                                                         Can be cut down for use on cores up to 9.25" in height.
                                fuel at high boost levels. It                                                                             the controller. As the red LED
                                is recommended that alcohol                                                                               lights up, it indicates about
                                be added for cold operating                                                                               80% of full injection and will
                                conditions.                                                                                               continue to get brighter until
                                                                                                                                          it approaches 100%. The gain
                                The dash controller only
                                                                                                                                          potentiometer can be set to                                                         1-992
                                measures 2.3” x 1.4” x 0.6”
                                                                                                                                          arrive at any level at any
                                tall, perfectly suited to fit into                                                                                                                                                                                                                                1-411
                                                                                                                                          boost. The water injection                                                          3.5"W X 3.0"H X 18.48"L - 2.25" OD hose connection extends 1.1"
                                any small cockpit space.
                                                                                                                                          system can be switched off via                                                      beyond core length. Mounting bosses on top. Can be used on cores    2.25" OD U-bend, short radius, unequal length
                                Although small in size, it Full user control over the entire operating range of a 1, 2, 3 –bar MAP Sensor                                                                                     up to 18.5" in height.
                                                                                                                                          an ‘ON/OFF’ push button,
                                contains all the necessary controls to enable the user to cover
                                                                                                      indicated by a green LED on the controller. This latest plug’n
                                the ‘mid’ to ‘high’ load range of any 0-5V output MAP sensor.
                                                                                                      play water injection from Turbonetics sets a new standard for
                                Injection triggering point is set by the ‘THRESHOLD’ the growing water injection market currently shared by many
                                potentiometer and is indicated by a blue LED on the controller. new water injection manufacturers.



                                                                                                                                                                                                                              1-993                                                               1-903
                                                                                    SPECIFICATIONS:
                                                                                                                                                                                                                              3.5"W X 1.8"H X 7.9"L - 2.5" OD hose connection.                    3" OD x 3" OD 90˚ short radius Elbow
                                                                                    Input voltage:..............................................10-15V    PWM Pump:
                                                                                                                                                             PWM input range ........................... 0-100%               Can be cut down for use on cores up to 7.9" in height.
                                                                                    Input current::
                                                                                                                                                             Max. Pressure .................................... 6 bar
                                                                                        Standby: .................................................50ma
                                                                                                                                                             Max. Flow ....................310cc/ min @ 6 bar
                                                                                        100% duty cycle .........................................5A
                                                                                                                                                             Max. Flow ........................1litre / min @ 3bar
                                                                                    MAP sensor input range: ................................0-5V
                                                                                                                                                         Input port ......................6mm OD hose barb
                                                                                                                                                             Output port ...................4mm OD hose barb
                                                                                    Dash Controller PWM output:
                                                                                                                                                         Atomizing Water jet:
                                                                                       Duty Cycle .......................................... 0-100%
                                                                                                                                                             Orifice: ................................................ 1mm
                                                                                       PWM frequency .................................... 100Hz
                                                                                                                                                             Material: ..........................Nickel over Brass            1-995
                                                                                                                                                             Thread: ..................................M8 x 0.75mm
                                                                                                                                                             Filter (Disc type) ........100 micron Stainless                  3.5"W X 5.0"H overall X 9.25"L - 2" OD hose connection canted       CAST ALUMINUM ELBOWS
                                                                                                                                                                                                                              up 30˚ viewed from end and angled up 10˚ viewed from the top.         PART NO.                    DESCRIPTION
                                                                                                                                                                                                                              Mounting boss on end. Can be cut down for use on cores                20184                       Cast Aluminum Elbow, 2"
                                                                                                                                                                                                                              up to 9.25" in height.                                                20544                       Cast Aluminum Elbow, 2.25"
                               APPLICATIONS AND FEATURES:                                                                                                                                                                                                                                           20201                       Cast Aluminum Elbow, 2.5"
                               • Charge-air cooling for forced induction engines      • Intermittent diaphragm pump – more reliable                            • Only three wires needed to be connected                                                                                            20545                       Cast Aluminum Elbow, 3"
                                                                                        than the normal windshield washer pump                                   for total control
                               • Minimizing the onset of detonation
                                                                                      • Built in thermal-cut in water pump                                     • Can be used with any 0-5V load sensors
                               • Suitable to run water and alcohol mixtures                                                                                      (built-in over voltage protection circuitry)
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                                               turboneticsinc.com
                                                                                      • Enable “Meaner & Leaner” air / fuel ratio
                               • Plug n’ play controller for ease of installation                                                                              • Inline 100-micron stainless steel filter
                                                                                      • Increase octane rating on low grade pump fuel
                               • All components are properly engineered                                                                                        • Water tank - optional                                        1-996
                                for reliable operation                                • Dash controller allows real-time user flow
                                                                                        control with status LEDs                                                                                                              3.5"W X 1.8"H X 7.9"L - 2.5" OD hose connection extends 1.1"       1-997
                                                                                                                                                                                                                              Mounting boss on top. Can be cut down
                                                                                                                                                                A water/alcohol injection system has been
                                                                                                                                                                                                                              for use on cores up to 7.9" in height.                             3.5"W X 1.8"H X 10.5"L - 3" OD hose
                                                                                                                                                                custom engineered for forced induction
                                                                                                                                                                on the 350Z/G35. Includes reservoir, lines,
                                                                                                                                                                and all necessary installation hardware to
                                                                                                                                                                bolt on. PN 31121

   72                                                                                                                                                                                                                                                                                                                                                        73
                               APPAREL & PROMOTIONAL                                                                                                                                                                                                                   TERMS & CONDITIONS




                                                                                                                                                                                                                                                                                                                                                             TERMS
APPAREL


                               BADGES AND DECALS



                                                                                         www.TU RBONETICSINC.com




                                MYLAR DECAL      PN 2-1441                           DECAL             PN 21535                       MYLAR DECAL       PN 21417
                                                                                                       Decal size: 3.5'' x 10''
                                DECAL            PN 21536                                                                             BADGE             PN 21416
                                                 Badge size: 12'' x 4''                                                                                 Badge size:1.125'' x 4''
                                BADGE            PN 21415                                                                             BADGE             PN 21413                                                    2255 AGATE COURT, SIMI VALLEY, CA 93065            TEL: (805) 581-0333 / FAX: (805) 584-1913
                                                 Badge size: 1.125'' x 4''                                                                              Badge size:1.625'' x 6''


                                                                                                                                                                                   TERMS AND CONDITIONS                                                                REPAIR ORDERS / PERFORMANCE UPGRADES
                                                                                                                                                                                   The following Terms and Conditions are effective November 1, 2006 and are           Contact a Sales and Technical Support Representative for information on
                               T-SHIRTS                                                                                                                                            subject to change without notice.                                                   turbocharger and related product repairs and performance upgrades.
                                                                                                                                                                                                                                                                       Available options, estimated pricing, shipment method, and RGA (Returned
                                                                                                                                                                                   PAYMENT METHOD                                                                      Goods Authorization) tracking number will be communicated at the time of the
                                                                                                                                                                                   Visa, MasterCard, American Express, cashier’s check, and money order are            call. After receipt of the product, we will contact you with our visual inspection
                                                                                                                                                                                   accepted. Company checks are accepted only upon approval.                           evaluation and final pricing. At that time you will be asked for approval to
                                                                                                                                                                                   HEAT EXCHANGER ORDERS                                                               complete the repair / upgrade. Not communicating your decision within 30
                                                                                                                                                                                   All heat exchanger products are subject to customer-approved drawings and           days after this contact may result in the return of the product to you.
                                                                                                                                                                                   a 50% deposit prior to acceptance of the order. No returns or exchanges on          REFUSED SHIPMENTS
                                                                                                                                                                                   customer-approved heat exchanger products will be accepted.                         Sending a shipment back to Turbonetics does not automatically constitute the
                                                                                                                                                                                   SHIPPING                                                                            right to a refund or credit. Turbonetics may, at its discretion, require different
                                                                                                                                                                                   All shipments are FOB Simi Valley, California, USA Shipping charges include         payment means for any reshipped refused shipments. It is the customer’s
                                                                                                                                                                                   insurance for full value of the product unless prohibited by the shipping agency.   responsibility to make all arrangements with Turbonetics for disposition of the
                                                                                                                                                                                                                                                                       refused shipment. Customer is responsible for all outgoing and return
                                                                                                                                                                                   FINAL SHIPMENT HOUR                                                                 shipping and handling charges regardless of disposition of refused shipment.
                                                                                                                                                                                   Orders received no later than 2:00P (14:00) will be shipped that day, inventory     Accounts that refuse a COD-Cashier’s Check/Money Order shipment will
                                                                                                                                                                                   levels permitting.                                                                  require a new payment method prior to acceptance of future orders.
                                                                                                                                                                                   AUTOMATIC ORDER CANCELLATION                                                        RETURNED CHECKS
                                                                                                                                                                                   Unless told otherwise, Turbonetics will automatically cancel open orders (back      Any customer checks returned to Turbonetics for insufficient funds from any
                                                                                                                                                                                   orders) after 60 days from the order entry date.                                    institution will incur a $25.00 USD processing charge. Any customer who
                                                                                                                                                                                                                                                                       submits an invalid check will be refused further shipments until such time as
                                                                                                                                                                                   CLAIMS
                                                                                                                                                                                                                                                                       any outstanding debt is cleared. Customers submitting invalid checks are
                                                                                                                                                                                   A claim for damage in transit must be made by the customer directly to the
                                                                                                                                                                                                                                                                       subject to cancellation of their buying status and / or their payment terms.
                                                                                                                                                                                   shipping agency as soon as the damage is discovered. Turbonetics is not liable
                                                                                                                                                                                                                                                                       Turbonetics will prosecute any fraudulent payments to the full extent
                                                                                                                                                                                   for the condition of merchandise as handled by the shipper once the shipper
                                                                                                                                                                                                                                                                       of the law.
                                                                                                                                                                                   has accepted delivery from Turbonetics.
                                                                                                                                                                                   RETURNED GOODS AUTHORIZATION TRACKING NUMBER                                        WARRANTY - "NO-FAULT / NO-HASSLE" WARRANTY PROGRAM
                                                                                                                                                                                   Turbonetics will only accept product returns, repair orders / upgrades, and         Turbonetics will repair or replace, at our expense, any new Turbonetics /
                                                                                                                                                                                   warranty requests that have been approved and are returned with a                   Spearco products that fail, including products used in racing or competition
                                                                                                                                                                                   corresponding Returned Goods Authorization (RGA) tracking number. Contact           applications, for a period of one year from the original date of purchase.
                                                                                                                                                                                   Turbonetics for approval and the RGA number. Write the RGA number clearly           (All turbocharger and cartridge assemblies have a factory installed inline oil
                                                                                                                                                                                   on the outside of the package and include it inside the package. This is very       filtration device. This filter device must remain in place if any warranty is to be
                                                                                                                                                                                   important in allowing us to properly identify and process your request. Failure     considered under the No-Fault / No-Hassle program.) Warranty is limited to
                                                                                                                                                                                   to comply with this requirement will result in the delay of processing or the       Turbonetics products and does not include progressive or subsequential
                                 GREY T-SHIRT        PN 11253-XX                     WHITE T-SHIRT       PN 11256-XX                     BLACK T-SHIRT       PN 11254-XX                                                                                               damage and does not cover removal or installation labor or associated parts.
                                                                                                                                                                                   product being returned to you.
                                       (M, L, XL, 2XL, 3XL)                                (M, L, XL, 2XL, 3XL)                                  (M, L, XL, 2XL)                                                                                                       Remanufactured units, upgraded units, and O.E.M. replacement units are
                                                                                                                                                                                   RETURN POLICY                                                                       covered by a 90-day warranty or the O.E. warranty period. Warranty is
                                                                                                                                                                                   Only unused and complete merchandise may be accepted for return subject             non-transferable and must be processed via the original purchaser from
                                                                                                                                                                                   to inspection and acceptance by Turbonetics. No goods will be accepted              Turbonetics. Contact Turbonetics for return approval, RGA (Returned Goods
                               LICENSE PLATE FRAMES                                                                                                                                without prior return authorization from Turbonetics. Call for approval and RGA      Authorization) tracking number, and shipping method PRIOR to sending
                                                                                                                                                                                   (Returned Goods Authorization) tracking number.                                     the product to Turbonetics. Our Customer Service Representative will provide
                                                                                                                                                                                                                                                                       packaging and shipping instructions. Please include your invoice with
                                                                                                                                                                                   • No returns will be accepted without an RGA tracking number.                       the shipment.
                                                                                                                                                                                   • No returns will be accepted after ninety (90) days from the original
          turboneticsinc.com




                                                                                                                                                                                                                                                                                                                                                              turboneticsinc.com
                                                                                                                                                                                                                                                                       Turbonetics products are manufactured to strict quality standards using all the
                                                                                                                                                                                     shipping date from Turbonetics unless approved.                                   latest and highest grade materials. All turbochargers are professionally
                                                                                                                                                                                                                                                                       assembled and VSR tested as complete assemblies to assure proper balance,
                                                                                                                                                                                   • All approved returns are subject to a 15% restocking charge NO EXCEPTIONS.        oil flow and long life with trouble free performance. Turbonetics highly
                                                                                                                                                                                   • The original invoice must accompany the return.                                   recommends that the installation of mechanical or electrical parts be
                                                                                                                                                                                                                                                                       performed by trained professionals. Improperly installed products may lead to
                                                                                                                                                                                   • Approved returns will be issued credit only.                                      unsafe and unreliable conditions.

                                                                          PN 30315                                                PN 30687



   74                                                                                                                                                                                                                                                                                                                                                        75

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:517
posted:9/1/2011
language:English
pages:17