8114

					                                  BANK OF INDIA
 Chandur
Bazaar BRANCH.
( Work to be completed within 10 days )
              QUOTAQTION DOCUMENT OF FURNISHING WORK.

SR                Description Of Item                    Unit      Qty.    Rate   Amount
NO.                                                                         (in   (in Rs.
                                                                           Rs.)
 1    Flooring:                                          Sq.ft
      Providing and laying of 2‟X2‟ Vitrified Tile
      flooring of approved make & shade viz. RAK        Verified
      (IMP-OFGY) of EURO (ATHENA) over
      necessary leveling screed of 1:4 cement           Ceramic
      mortar (20mm thick) with proper slope
      wherever required including pointing of the
      joints with white cement and matching
      pigments , curing etc. complete in all respects
      (excluding Toilets and Non –Customer area)
 2    Façade of Entrance Door-Refer Dwg.no.11            Sq.ft.    75.00
      Providing and fixing in position Aluminum
      composite panel Boxing with PVDF coating
      & LDPE core laminated Eurobond / Altobond
      / Alukbond Exterior Grade 4 mm thick with
      composite of (0.5mm - 3mm-
      0.5mm)including fabrication for the same
      with aluminum fabrication for the same
      silicon sealent (Dow Corning 789) masking
      tape, necessary scaffolding etc. as detailed in
      drawing no. (11) Complete in all respects.
 3    False ceiling (Armstrong)                          Sq.ft.    1790
      Providing & fixing in position false ceiling in
      Armstrong 600X 600 mm X 15/16 mm Dune
      Supreme RH 99 Prima title with Tegular edge
      framework as specified by Armstrong Co.
      with suspender wherever required. Making
      necessary framework for A.C. ducting, if any,
      and necessary cutout for diffusers and light
      feting, taping and finishing to proper & level,
      including making grooves and tapes doors for
      A.C. unit in 18 mm thick M.R. Grade
      Plywood with Stainless Steel hinges & locks
      with moulding 1” x 1” for edge including
      finishing with White Plastic Emulsion Paint
      etc. complete in all respect. (Note:- Only the
      Plane area will be measured for payment. No
      extra payment will be made for cutouts,
      grooves, moulding etc.)
4.    False Ceiling (Gypsum Board)                       Sq.ft.
     Providing & fixing in position false ceiling in
     Gypboard 12mm thick for horizontal &
     vertical fixed over G.I. framework as
     specified by India GypsmCo.Ltd. including
     trap door for A.C. unit in 18mm thick MR
     Grade plywood with Stainless Steel hinges &
     locks with moulding 1”x 1” for edge
     including finishing with white Plastic
     Emulation Paint etc. compete in all respect.
     (Note:- Only one plan area will be measures
     for payment. No extra payment will be made
     for cutouts, grooves, moulding etc.)
5    Painting                                          Sq.Ft
     Providing and applying White Plastic
     Emulation paint of Asian                          With
     Paint/ICIDulux/Berger and Sporty Yellow-X         putty
     104 shade of Royal Luxury Emulsion of
     Asian Paint in minimum 2 coats including
     scraping, opening of existing cracks, filling     Without
     up of “V” cracks with epoxy expandable            putty
     putty ti required depths, making good weak
     plastered/unplastered surface with cement
     plaster wherever required. Item to include
     Plaster of Paris, primer, palti, and making
     good existing surface to receive new paint
     including cleaning on completion of painting
     work etc. complete in all respect.
6.   Entrance Door                                     Sq.ft.    49
     Proving and fixing Entrance Door (glazed) as
     per drawing no. 11 in Silver
     Anodisedaluminium door section (Jindal
     make) in top and bottom, glazed with 12mm
     thick glass of approved make with etching
     and frosting. Item to include floor springs,
     locks. All necessary hardware of Stainless
     Steel finished as approved by the project
     Consultant/Bank complete in all respects.

7.   Front Office Counter:                             Sq.ft     13.5
     Proving and fixing in position Front Office                 “0”
     Counter 2‟-6” wide as per drawing No. (1-
     A,1_B, 1-C, 1-D & 15) comprising of the
     following complete in all respects:-
       i)     Working top made with 25 mm
              thick              plywood finished
              with 1 mm thick laminated. Outside
              edge of the working top shall be
              provided with 11/4X1” .teak wood
              moulding finished with melamine
              polish. Inside edge will be provided
        with ½ “X1” T.W. beading putti
        with melamine finish.
ii)     Vertical facia (Apron) made with
        18 mm thick plywood finished with
        1mm thick laminated with 1 mm
        thick grooves at the joint of
        laminates of two different shade.
iii)    Vertical drop (horizontal band)
        shall be provided on the facia below
        the working top made with 18mm
        thick laminated with provision for
        concealed light, 1 mm thick groove
        shall be provided at the joint of two
        different shade of laminates.
iv)     Glazed partition above working top
        to be provided with 12mm thick
        clear glass cut to be standard shape
        fixed to the partition as per fixing
        detail and boxing with concealed
        S,S, finished „D‟ bracket as shown
        in the drawing. The exposed edge
        of the glass shall be finished in
        mirror polish.
v)      3‟-10‟ high Boxing (10:X10”) made
        with 18 mm thick plywood finished
        with 1 mm thick laminated
        including providing and fixing 6
        mm thick square frosted glass at the
        height 3‟-2” above finished floor
        level.
vi)     1‟-9” high Boxing (5”X5”) made
        with 12 mm thick plywood finished
        with 1mm thick laminated.
vii)    Vertical support made with 18 mm
        thick plywood fished with white
        enamel paint.
viii)   Telescopic CPU Stand/ready made
        Keyboard tray shall be provided all
        approved model and make.
ix)     Footrest made with T.W. member
        of size 4”X1 ½ “ finished French
        polish .
x)      Drawer unit as per drawing shall be
        provided with multipurpose Godrej
        locks in each drawer. Facia of
        drawer unit shall be finished with 1
        mm thick limited and all other side
        shall be finished with white enamel
        paint. The drawer will provided
        with handles (Stainless Still finish)
                and channel as per approval of
                theproject consultant/Bank.
       xi)      Boxing as per drawing made with
                12mm thick plywood finished with
                synthetic enamel paint shall be
                provided below the table top for the
                LAN cabling/Telephone wire
                conducting.
       The item to include all necessary hardware
       and fitting in Stainless still finish, lipping
       to all the edge and making provision only
       for electrical fitting behind the front.
       Vertical drop and also in the 10”X10‟
       boxing as shown in the drawing. Necessary
       beading with melamine polish for fixing
       the glass are to be provided.
8.   Cash Counter;                                    Sq.ft   12‟0‟
     Providing and fixing in the position Cash
     Counter 2‟-9” wide as per drawing No. (2-A.,
     2-B, 2-C, 2-D, 2-E, 2-F) comprising of the
     following:
       i)       Working top made with 25 mm
                thick plywood finish with 1 mm
                thick laminated. Outside edge of the
                working top shall be provided with
                melamine polish. Inside edge will
                be provided with ½”X1” T.W.
                beading patti with melamine polish.
       ii)      Vertical facia (Apron) made wiyh
                18mm thick plywood finish with
                1mm thick laminated with 1mm
                thick groove at the joint of
                laminated of two different shade.
       iii)     Vertical drop (horizontal band)
                shall be provided on the fecia below
                the working top made with 18b mm
                thick plywood finish 1mm thick
                laminated with provision for
                concealed light, 1mm thick groove
                shall be provided at the joint of two
                different shade of laminated.
       iv)      Glazed partition 1‟-4” height above
                working top provided with 12mm
                thick toughened and frosted glass
                beside non-transparent film from
                inside foxed to partition as per
                fixing detail and to boxing with
                concealed S.S. finished „D‟ bracket
                as shown in the drawing. The
                exposed edged of the glass shall be
        finish in mirror polish.
v)      Transaction top shall be provided
        with 12mm thick toughened glass
        (partly glazed partly frosted) fixed
        horizontally with concealed
        stainless still D bracket, both
        exposed edge (inside and outside)
        shall be moulded and finished in the
        mirror polish.
vi)     Glazed partition having height 1.0”
        above the transaction top (in facia)
        shall be provided with 12mm thick
        glass (clear) with cut out of
        8”X4”as per drawing. The edge cut
        out and the top edge of the glass are
        to be mirror polished and to be
        fixed to be partition as per fixing
        detail and to boxing with concealed
        S.S. finished „D‟ bracket as shown
        in .
Glass (clear) above the sit to be fixed to
partition as per fixing detail and to boxing
with concealed S.S. finished „D‟ bracket as
shown in the drawing. The exposed edge
shall be finished in mirror polish.
vii)7‟-7” high Boxing (10‟X10”) made
with 8mm thick plywood as per drawing
with 1-6” horizontal extension at the top
including providing and fixing 6mm thick
square frosted glass at the height of 5”-11‟
above finished floor level.
ix)     1‟-9‟ high boxing (5”X5”) made
        with 12mm thick plywood finished
        with 1mm thick laminated aer to be
        provided.
x)      Telescopic CPU Stand/ready made
        Keyboard tray shall be provided all
        approved model and make.
xi)     footrest made with T.W. member of
        size 4‟X1 1/2'”finished with French
        polish.
xii)    Drawer unit as per drawing shall be
        provided and each drawer should
        have vertical partition for keeping
        currency notes and multipurpose
        Godrej locks. Facia of drawer unit
        shall be finished with white enamel
        paint. The drawer will be provided
        with handles (Stainless Steel
        finished) and channels as per
                  approval of the Project
                  Consultant/Bank .
         xiii) Boxing as per drawing made with
                  12mm thick plywood finished with
                  Synthetic enamel paint shall be
                  provided below the table top for
                  electrical conduiting and at the
                  bottom for the LAN
                  cabling/Telephone wire conduiting.
         The item to include all necessary hardware
         and fitting in Stainless Steel finish, lapping
         to all edge and making provision only for
         electrical fitting behind the Vertical drop
         and also in the 10”X10” boxing as shown
         in the drawing . necessary beading with
         matching melamine polish for fixing the
         glass are to be provided as per drawing/as
         directed.
9.    Solid Full Height Partition                       Sq.ft.
      Providing and fixing in opposition solid full
      Height Partition in frame work including
      door in the 2‟X2‟ grid (horizontally and
      vertically) comprising of 2”X11/2” T.W.
      section with 6mm thick plywood on the both
      side finished with 1mm thick laminated of
      the approved make and color as shown in
      drawing No. 17. item to include 2”X2” T.W.
      member for door frame. All exposed T.W.
      surface to be finish in melamine polish of the
      matching laminated color as directed
      including all necessary Stainless Still finish
      fitting/hardware, door closers, Godrej locks,
      and wood preservative paint etc. as per list of
      approved by the Project consultace/Bank
      complete in all respect.
      (Note: In case fall ceiling, the vertical T.W.
      member to be fixed with pucca ceiling but the
      area of partition payable will be below the
      fall ceiling only).
10.   Partly Gazed full Height partition                Sq.ft    285
      Providing and fixing in position partly glazed
      Full Height Partition work as show in the
      drawing nos. (3) & (4) including door as
      shown in the drawing No. (13) in frame work
      at 2‟X2‟ grid (Horizontally and Vertically)
      compromising of 2”X11/2” T.W. section
      and/or as per frame work show in the
      drawing with 6mm plywood on the both side
      finishing with 1mm thick laminated of
      approved shade and color as shown in the
      drawing. Item to include 8mm thick glass
      with etching and frosting as per design and
      2”X2” T,W. member for door frame to take
      8mm thick glass with etching and frosting.
      All exposed T.W. surface to be finished in
      melamine polish of matching laminated color
      as directed including all necessary Stainless
      Steel finish fitting/hardware, door closer,
      Godrej locks wood preservative paint etc. as
      per list of approved material and as approved
      by the project Consultance/Bank complete in
      all respect.
      (Note: in case of false ceiling, the vertical
      T.W. member to be fixed with pucca ceiling
      but the area of partition payable will be
      below the fall ceiling only).
11.   Party Glazed Partition for Cash Cabins         Sq.ft.   335
      Providing and fixing in the position 7‟-7”
      high partly glazed partition for cash Cabins
      as per drawing nos. (2-A,2-B,2-C,2-D&2-E)
      including door drawing no. (12) in frame
      work at 2‟X2‟ grid (horizontally and
      vertically) compromising of 2”X11/2” T.W.
      section and/or as per frame work show in the
      drawing with 6mm plywood on the both side
      finishing with 1mm thick laminated of
      approved shade and color as shown in the
      drawing. Item to 8mm thick glass with
      etching and frosting as per design and 2”X2”
      T,W. member for door frame to take 8mm
      thick glass with etching and frosting.
      The door will be provided withT.W. louvers
      finished in melamine polish of matching
      laminated color. The door are also to be
      provided with Godrej Night Latch. Tow
      wooden trays are also to be provided as per
      drawing. Necessary cuttuos are to be
      provided in the glass and the edge ofthe glass
      cutous are to be finished in mirror polish.
      All exposed T.W. surface to be finished in
      melamine polish of matching laminated color
      as directed including all necessary Stainless
      steel Finifhfittng/hardware, door closers,
      Godrej locks and wood preservative paint etc.
      as per list of approved material and as
      approved by the project Consultance/Bank
      complete in all respect.


12.   Partly Glazed Low Height Partition             Sq.ft    55
      Providing and fixing in position partly glazed
      low height partition (21?2” thick) in frame
      work with T.W. vertical member at 2” c/c
      and 3 horizontal member at equal distance
      comprising of 2”X11/2”T.W. section with
      6mm plywood on both side finish with 1mm
      thick laminated of the approved made and
      shade as shown in drawing no. (14)or(3).
      Item to include 12mm thick glass
      (clear/frosted) to be fixed as shown in mirror
      polish. T.W. runner should be melamine
      polished in matching colour of laminated etc
      complete in all respect.

13.   Managers Table/Officer’s Table
      Providing and fixing in position manager‟s         Manager     1 No
      Table of size 6‟-6”X3‟-6”as per drawing            Table
      no.(6)/Officers Table of size 5‟X2‟-6” as per      (6.6”x3‟)
      drawing no (5)including side storage
      (credenza) by sung 25mm thick plywood top
      and 18mm thick plywood for all other
      horizontal and vertical members. Telescopic
      CPU Stand/ready made keyboard tray shall
      be provided of approved model and make.
      footrest made with T.W> member of size
      4”X11/2” finished with French polish.

      Side „Storage ( Credenza ) as per drawing          Officer
      shall be provided. Facia of side Storage (         Table       5 No
      Credenza ) shall be finished with 1mm thick        6‟x2.‟6”
      laminates as shown in the drawing and all
      other sides shall be finished with white
      enamel paint. The side Storage (credenza)
      shall be provided with handles (Stainless
      Steel finish) and channels as per approval of
      the Project Consultant /Bank

      All exposed plywood to be finished with
      1mm thick laminate of approved make &                          1
      shade and all exposed edges of table top &
      ply verticals to have 1”x4” T.W. lipping. All
      exposed T.W.sections to be melamined and
      internal surfaces to have white enamel plaint
      as directed item to include ploywood boxing
      all necessary hardware and fitting in
      Stainless Steel finish, lipping to all edge etc.
      complete in all respect.
14    Staff Table                                        Each
      Providing and fixing in position Staff Table
      of size 4‟6”X2‟ 6” as per drawing No. (5)
      byusung 25mm thick plywood for top and
      18mm thick plywood for all other horizontal
      and vertical member. Telescopic CPU
      Stand/ready made Keyboard tray shall be
      provided.
      Drawer unit as per drawing shall be provided
      with multipurpose Godrej locks in each
      drawer. Facia of drawer unit shall be finished
      with 1mm thick laminated and all other side
      shall be finished with white enamel paint.
      The drawer will be provided with handles
      (Stainless steel finish) and channel as per
      approvel of the project Consultant/Bank.
      All exposed plywood surface to be finished
      with 1mm thick. Laminated of approved
      make and shade, and all exposed edges of
      table top and ply vertical to have 1”X1/4”
      T.W. lipping. All exposed T.W. sections to
      be melamined and internal surface to have a
      white enamel paint as Directed. The items to
      include plywood boxing, All necessary
      hardware and fittings in stainless steel finish,
      lipping to all its edges etc.complete in all
      respects.
15    Full height storage/ low Height Storage/           Sq.ft.
      Back Storage (Credenza).
      Providing and fixing in position full height
      Storage/ Low Height Storage/ Back Storage
      ( Credenza) as shown in DRg.No.(8),(9) &
      (10) respectively using plywood of required
      thickness finished with 1 mm thick laminated
      as shown in the Drawing and all other sides
      shall be finished with white enamel paint as
      details therein.
      The storage units shall be provided with
      handles.
      (Stainless Steel Finish) as per approval of the
      projects consultant/ Bank .
      All exposed plywood surface to be finished
      with 1 mm thk .laminated of approved make
      & shed and all exposed edges of plywood to
      have 1”x ¼ “ T.W. Lipping. All Exposed
      T.W. section to be melamined in matching
      colour laminates and internal surface to have
      white enamel paint as directed. Item to
      include all necessary Hardware and Fitting in
      Stainless Steel finish, Godrej multi purpose
      locks including magnetic ball catcher etc.
      compete in all respect.
16.   Side Table.                                        1 No     1No
      For specification/size please contact with
      Architect.
17.   Slip Counter.                                 4ft      1 No
       For specification/size please contact with
      Architect.
18.   Sofa
      3Seater                                       No       1 no
      4 Seater                                      No       2 no

19.   Providing blinds to windows                   Sq.ft.   50
      For specification/size please contact with
      Architect.
20.   Panelingof columns up to height of 8. ft      lumsum   4nos.
21.   TOTAL
QUOTATION DOCUMENT OF ELECTRICAL WORKS OFChandur Bazaar
BRANCH
(Time limit for completion of works is 10 days)
Sr.No. Item                         Quantity    Rate Amount.
1.      Point Wiring and fixing     Nos.
        of point wiring for Light,
        fan, bell,
        ex.fan(concealed type)
        with ISI 2X1.5 mm
        copper pvc insulated wire
        1100v grade with ISI
        mark Modular switches
        (Anchor roma)
1A.     Same as above but           Nos.
        independent 5 Amp
        switch & socket (Anchor
        roma)
2.      Providing 16Amp             Nos
        independent plug point
        (concealed type) with
        16amp. Modular switches
        & 2x2.5sq.mm. &1x1.5
        sq.mm. copper wire for
        Air
        conditioner/inverter/water
        cooler/Note counting
        Machine.
3.      Providing telephone         Nos.
        points modular jack type
        socket on wall/partition
        with suitable concealed
        MS box & plate including
        wall cutting and making
        the surface as it is.
4.      Supplying and erecting      Nos.
        unbreakable concealed
        type (03 to 18 module)
        modular switch box and
        plate duly erected flush to
        wall with required
        chiseling and with cement
        mortar/pop as per
        requirement to match the
        background in approval
        manner.
5.      Supply and fixing of ding No.
        dong bell of approved
        make along the necessary
        connection
6.   Supply and erecting           Nos. No
     ceiling fans with double
     ball bearing 1200mm.
     sweep complete erected
     in position, canopy
     &down road with hook,
     rubber bushing, clamp,
     nut & bolts etc.
     (Crompton/havells/Bajaj
     make)
7.   Supplying and erecting of     No
     heavy fresh air cum
     exhaust fan light duty 300
     mm. metallic body.
     Olastic blades
     (Crompton/havells/Bajaj
     make)
8.   Supply, installation,         Nos.
     testing, commissing of
     indoor recessed mounting
     Down Lighter 2x18w
     CFL mat finish (similer to
     havells/Bajaj)
9.   Supply installation           Nos.
     testing, commissioning
     approved make 1x40 watt
     surface mounting fitting
     (Philips/bajaj)
10   Supplying and erecting        Nos.
     Philips/Bajaj/Crompton
     make 1x40 watt hanging
     mirror optic type mace
     CRCA sheet not less than
     0.7 mm. thickness Silver
     on reflector side and gray
     on other surface complete
     with one 40 watt copper
     VPIT ballast, lock type
     tow holder, starter, holder
     and condenser duly wired
     up suitable for 250V
     supply and erect with the
     flexible twin core wire
     24/0.2 mm. and with
     necessary material and
     marking Sr. No. and date
     of erection (similer to
     havells/Bajaj) MS
     conduct with pipe (Ht. as
     per site situation) with
      socket check nute

11.   Providing & fixing 4 pole    Nos.
      isolator 63 amp. 415 volt
      of approved make.
12.   Providing and fixing 10      Nos.
      to 32 amp. SPMCB of
      approved make
13.   Earthing:-                   No.
      B-type earthing with 2”
      B-class G.I pipe,
      Charcoal, salt with
      necessary and required
      material
14    Special Earthling for        No.
      meter distribution wiring,
      with 8 no copper tar

15.   Distribution panel board     No.
      with concealed box
16.   Providing and fixing of      Nos.
      step type regular
      (moduler)
17.   Providing and fixing 100     Nos.
      A porcelain kit katfor
      mains on wood board.
18.   Automatic Change over        No.
      switch (for Genset)
      Supply and erecting
      automatic change over
      MCB in provided
      distribution
      board(MDS,L&T)
19    DPMCB (For UPS               No.
      Supply) supplying and
      erecting two pole MCB‟s
      40 Amp,Breaking
      capacity with required
      wiring connection with
      separate MS MCB
      connection box for UPS
      changing and UPS
      outgoing supply.
20    Providing & fixing           No.
      mirror optic 2Feetx2Feet
      (36x2 rod) Sqare fitting
      make Wipro/ Bajaj.
21   Providing and fixing
     brunch of wires of
     various size & thickness
     are as follow with 2.5 *
     1.5 sq. mm. copper pace
     insulated wire for earth
     from main DB to switch
     board, bus bar to DB
     including floor/wall
     cutting & making the
     surface as it is complete
     & as directed by
A    architect:                Mtr
B    Do as above but use in
     wire 4wire x6sq. mm.      mtr
     wire.
C    Do as above but use in    Mtr
     wire 2 x 4 sq. mm. wire.
D    Do as above but use in    Mtr
     wire 2 x 2.5 sq. mm. wire
     Do as above but use in
     wire 2 x 1.5 sq. mm. wire
E    Do as above but use 2
     pair telephone wire       mtr

21   AC point wiring with AC   nos
     starter & Ac socket
     (MDS,L&T)
22   Wall fan
     TOTAL
                                  BANK OF INDIA
  BRANCH.
( Work to be completed within 15 days )
              QUOTAQTION DOCUMENT OF FURNISHING WORK.

SR               Description Of Item                   Unit      Qty.    Rate Amount
NO.                                                                     (inRs.) (in Rs.
 1  Flooring:                                          Sq.ft
    Providing and laying of 2‟X2‟ Vitrified Tile
    flooring of approved make & shade viz.            Verified
    RAK (IMP-OFGY) of EURO (ATHENA)
    over necessary leveling screed of 1:4 cement      Ceramic
    mortar (20mm thick) with proper slope
    wherever required including pointing of the
    joints with white cement and matching
    pigments , curing etc. complete in all
    respects (excluding Toilets and Non –
    Customer area)
 2  Façade of Entrance Door-Refer Dwg.no.11            Sq.ft.     75
    Providing and fixing in position Aluminum
    composite panel Boxing with PVDF coating
    & LDPE core laminated Eurobond /
    Altobond / Alukbond Exterior Grade 4 mm
    thick with composite of (0.5mm         - 3mm-
    0.5mm)including fabrication for the same
    with aluminum fabrication for the same
    silicon sealent (Dow Corning 789) masking
    tape, necessary scaffolding etc. as detailed in
    drawing no. (11) Complete in all respects.
 3  False ceiling (Armstrong)                          Sq.ft.    1790
    Providing & fixing in position false ceiling in
    Armstrong 600X 600 mm X 15/16 mm Dune
    Supreme RH 99 Prima title with Tegular
    edge framework as specified by Armstrong
    Co. with suspender wherever required.
    Making necessary framework for A.C.
    ducting, if any, and necessary cutout for
    diffusers and light feting, taping and
    finishing to proper & level, including making
    grooves and tapes doors for A.C. unit in 18
    mm thick M.R. Grade Plywood with
    Stainless Steel hinges & locks with moulding
    1” x 1” for edge including finishing with
    White Plastic Emulsion Paint etc. complete
    in all respect. (Note:- Only the Plane area
    will be measured for payment. No extra
    payment will be made for cutouts, grooves,
    moulding etc.)
 4. False Ceiling (Gypsum Board)                       Sq.ft.
     Providing & fixing in position false ceiling in
     Gypboard 12mm thick for horizontal &
     vertical fixed over G.I. framework as
     specified by India GypsmCo.Ltd. including
     trap door for A.C. unit in 18mm thick MR
     Grade plywood with Stainless Steel hinges &
     locks with moulding 1”x 1” for edge
     including finishing with white Plastic
     Emulation Paint etc. compete in all respect.
     (Note:- Only one plan area will be measures
     for payment. No extra payment will be made
     for cutouts, grooves, moulding etc.)
5    Painting                                          Sq.Ft
     Providing and applying White Plastic
     Emulation paint of Asian Paint/ICI                With putty
     Dulux/Berger and Sporty Yellow-X 104
     shade of Royal Luxury Emulsion of Asian
     Paint in minimum 2 coats including                Without
     scraping, opening of existing cracks, filling     putty
     up of “V” cracks with epoxy expandable
     putty ti required depths, making good weak
     plastered/unplastered surface with cement
     plaster wherever required. Item to include
     Plaster of Paris, primer, palti, and making
     good existing surface to receive new paint
     including cleaning on completion of
     painting work etc. complete in all respect.
6.   Entrance Door                                     Sq.ft.       49
     Proving and fixing Entrance Door (glazed)
     as per drawing no. 11 in Silver
     Anodisedaluminium door section (Jindal
     make) in top and bottom, glazed with 12mm
     thick glass of approved make with etching
     and frosting. Item to include floor springs,
     locks. All necessary hardware of Stainless
     Steel finished as approved by the project
     Consultant/Bank complete in all respects.

7.   Front Office Counter:                       r.ft               13.5
     Proving and fixing in position Front Office
     Counter 2‟-6” wide as per drawing No. (1-
     A,1_B, 1-C, 1-D & 15) comprising of the
     following complete in all respects:-
       xii)   Working top made with 25 mm
              thick              plywood
              finished with 1 mm thick
              laminated. Outside edge of the
              working top shall be provided with
              11/4X1” .teak wood moulding
              finished with melamine polish.
       Inside edge will be provided with
       ½ “X1” T.W. beading putti with
       melamine finish.
xiii) Vertical facia (Apron) made with
       18 mm thick plywood finished
       with 1mm thick laminated with 1
       mm thick grooves at the joint of
       laminates of two different shade.
xiv) Vertical drop (horizontal band)
       shall be provided on the facia
       below the working top made with
       18mm thick laminated with
       provision for concealed light, 1
       mm thick groove shall be provided
       at the joint of two different shade
       of laminates.
xv)    Glazed partition above working
       top to be provided with 12mm
       thick clear glass cut to be standard
       shape fixed to the partition as per
       fixing detail and boxing with
       concealed S,S, finished „D‟
       bracket as shown in the drawing.
       The exposed edge of the glass
       shall be finished in mirror polish.
xvi) 3‟-10‟ high Boxing (10:X10”)
       made with 18 mm thick plywood
       finished with 1 mm thick
       laminated including providing and
       fixing 6 mm thick square frosted
       glass at the height 3‟-2” above
       finished floor level.
xvii) 1‟-9” high Boxing (5”X5”) made
       with 12 mm thick plywood
       finished with 1mm thick
       laminated.
xviii) Vertical support made with 18 mm
       thick plywood fished with white
       enamel paint.
xix) Telescopic CPU Stand/ready made
       Keyboard tray shall be provided
       all approved model and make.
xx)    Footrest made with T.W. member
       of size 4”X1 ½ “ finished French
       polish .
xxi) Drawer unit as per drawing shall
       be provided with multipurpose
       Godrej locks in each drawer. Facia
       of drawer unit shall be finished
       with 1 mm thick limited and all
                other side shall be finished with
                white enamel paint. The drawer
                will provided with handles
                (Stainless Still finish) and channel
                as per approval of the project
                consultant/Bank.
       xxii) Boxing as per drawing made with
                12mm thick plywood finished with
                synthetic enamel paint shall be
                provided below the table top for
                the LAN cabling/Telephone wire
                conducting.
       The item to include all necessary
       hardware and fitting in Stainless still
       finish, lipping to all the edge and making
       provision only for electrical fitting behind
       the front. Vertical drop and also in the
       10”X10‟ boxing as shown in the drawing.
       Necessary beading with melamine polish
       for fixing the glass are to be provided.
8.   Cash Counter;                                     12
     Providing and fixing in the position Cash
     Counter 2‟-9” wide as per drawing No. (2-
     A., 2-B, 2-C, 2-D, 2-E, 2-F) comprising of
     the following:
       vii)     Working top made with 25 mm
                thick plywood finish with 1 mm
                thick laminated. Outside edge of
                the working top shall be provided
                with melamine polish. Inside edge
                will be provided with ½”X1” T.W.
                beading patti with melamine
                polish.
       viii) Vertical facia (Apron) made wiyh
                18mm thick plywood finish with
                1mm thick laminated with 1mm
                thick groove at the joint of
                laminated of two different shade.
       ix)      Vertical drop (horizontal band)
                shall be provided on the fecia
                below the working top made with
                18b mm thick plywood finish
                1mm thick laminated with
                provision for concealed light, 1mm
                thick groove shall be provided at
                the joint of two different shade of
                laminated.
       x)       Glazed partition 1‟-4” height
                above working top provided with
                12mm thick toughened and frosted
        glass beside non-transparent film
        from inside foxed to partition as
        per fixing detail and to boxing
        with concealed S.S. finished „D‟
        bracket as shown in the drawing.
        The exposed edged of the glass
        shall be finish in mirror polish.
xi)     Transaction top shall be provided
        with 12mm thick toughened glass
        (partly glazed partly frosted) fixed
        horizontally with concealed
        stainless still D bracket, both
        exposed edge (inside and outside)
        shall be moulded and finished in
        the mirror polish.
xii)    Glazed partition having height
        1.0” above the transaction top (in
        facia) shall be provided with
        12mm thick glass (clear) with cut
        out of 8”X4”as per drawing. The
        edge cut out and the top edge of
        the glass are to be mirror polished
        and to be fixed to be partition as
        per fixing detail and to boxing
        with concealed S.S. finished „D‟
        bracket as shown in .
Glass (clear) above the sit to be fixed to
partition as per fixing detail and to boxing
with concealed S.S. finished „D‟ bracket
as shown in the drawing. The exposed
edge shall be finished in mirror polish.
vii)7‟-7” high Boxing (10‟X10”) made
with 8mm thick plywood as per drawing
with 1-6” horizontal extension at the top
including providing and fixing 6mm thick
square frosted glass at the height of 5”-11‟
above finished floor level.
xiv) 1‟-9‟ high boxing (5”X5”) made
        with 12mm thick plywood finished
        with 1mm thick laminated aer to
        be provided.
xv)     Telescopic CPU Stand/ready made
        Keyboard tray shall be provided
        all approved model and make.
xvi) footrest made with T.W. member
        of size 4‟X1 1/2'”finished with
        French polish.
xvii) Drawer unit as per drawing shall
        be provided and each drawer
        should have vertical partition for
                  keeping currency notes and
                  multipurpose Godrej locks. Facia
                  of drawer unit shall be finished
                  with white enamel paint. The
                  drawer will be provided with
                  handles (Stainless Steel finished)
                  and channels as per approval of the
                  Project Consultant/Bank .
         xviii) Boxing as per drawing made with
                  12mm thick plywood finished with
                  Synthetic enamel paint shall be
                  provided below the table top for
                  electrical conduiting and at the
                  bottom for the LAN
                  cabling/Telephone wire
                  conduiting.
         The item to include all necessary
         hardware and fitting in Stainless Steel
         finish, lapping to all edge and making
         provision only for electrical fitting behind
         the Vertical drop and also in the 10”X10”
         boxing as shown in the drawing .
         necessary beading with matching
         melamine polish for fixing the glass are to
         be provided as per drawing/as directed.
9.    Solid Full Height Partition                     Sq.ft.
      Providing and fixing in opposition solid full
      Height Partition in frame work including
      door in the 2‟X2‟ grid (horizontally and
      vertically) comprising of 2”X11/2” T.W.
      section with 6mm thick plywood on the both
      side finished with 1mm thick laminated of
      the approved make and color as shown in
      drawing No. 17. item to include 2”X2” T.W.
      member for door frame. All exposed T.W.
      surface to be finish in melamine polish of
      the matching laminated color as directed
      including all necessary Stainless Still finish
      fitting/hardware, door closers, Godrej locks,
      and wood preservative paint etc. as per list
      of approved by the Project consultace/Bank
      complete in all respect.
      (Note: In case fall ceiling, the vertical T.W.
      member to be fixed with pucca ceiling but
      the area of partition payable will be below
      the fall ceiling only).
10.   Partly Gazed full Height partition              Sq.ft    285
      Providing and fixing in position partly
      glazed Full Height Partition work as show in
      the drawing nos. (3) & (4) including door as
      shown in the drawing No. (13) in frame
      work at 2‟X2‟ grid (Horizontally and
      Vertically) compromising of 2”X11/2” T.W.
      section and/or as per frame work show in
      the drawing with 6mm plywood on the both
      side finishing with 1mm thick laminated of
      approved shade and color as shown in the
      drawing. Item to include 8mm thick glass
      with etching and frosting as per design and
      2”X2” T,W. member for door frame to take
      8mm thick glass with etching and frosting.
      All exposed T.W. surface to be finished in
      melamine polish of matching laminated
      color as directed including all necessary
      Stainless Steel finish fitting/hardware, door
      closer, Godrej locks wood preservative paint
      etc. as per list of approved material and as
      approved by the project Consultance/Bank
      complete in all respect.
      (Note: in case of false ceiling, the vertical
      T.W. member to be fixed with pucca ceiling
      but the area of partition payable will be
      below the fall ceiling only).
11.   Party Glazed Partition for Cash Cabins        Sq.ft.   335
      Providing and fixing in the position 7‟-7”
      high partly glazed partition for cash Cabins
      as per drawing nos. (2-A,2-B,2-C,2-D&2-E)
      including door drawing no. (12) in frame
      work at 2‟X2‟ grid (horizontally and
      vertically) compromising of 2”X11/2” T.W.
      section and/or as per frame work show in
      the drawing with 6mm plywood on the both
      side finishing with 1mm thick laminated of
      approved shade and color as shown in the
      drawing. Item to 8mm thick glass with
      etching and frosting as per design and
      2”X2” T,W. member for door frame to take
      8mm thick glass with etching and frosting.
      The door will be provided withT.W. louvers
      finished in melamine polish of matching
      laminated color. The door are also to be
      provided with Godrej Night Latch. Tow
      wooden trays are also to be provided as per
      drawing. Necessary cuttuos are to be
      provided in the glass and the edge ofthe
      glass cutous are to be finished in mirror
      polish.
      All exposed T.W. surface to be finished in
      melamine polish of matching laminated
      color as directed including all necessary
      Stainless steel Finifhfittng/hardware, door
      closers, Godrej locks and wood preservative
      paint etc. as per list of approved material
      and as approved by the project
      Consultance/Bank complete in all respect.


12.   Partly Glazed Low Height Partition           Sq.ft           55
      Providing and fixing in position partly
      glazed low height partition (21?2” thick) in
      frame work with T.W. vertical member at 2”
      c/c and 3 horizontal member at equal
      distance comprising of 2”X11/2”T.W.
      section with 6mm plywood on both side
      finish with 1mm thick laminated of the
      approved made and shade as shown in
      drawing no. (14)or(3). Item to include
      12mm thick glass (clear/frosted) to be fixed
      as shown in mirror polish. T.W. runner
      should be melamine polished in matching
      colour of laminated etc complete in all
      respect.

13.   Managers Table/Officer’s Table
      Providing and fixing in position manager‟s    Manager        No1
      Table of size 6‟-6”X3‟-6”as per drawing       Table
      no.(6)/Officers Table of size 5‟X2‟-6” as per (6.6”x3‟)
      drawing no (5)including side storage
      (credenza) by sung 25mm thick plywood top
      and 18mm thick plywood for all other
      horizontal and vertical members. Telescopic
      CPU Stand/ready made keyboard tray shall
      be provided of approved model and make.
      footrest made with T.W> member of size
      4”X11/2” finished with French polish.

      Side „Storage ( Credenza ) as per drawing       Officer
      shall be provided. Facia of side Storage (      Table        No5
      Credenza ) shall be finished with 1mm thick     5‟6‟x2.‟6”
      laminates as shown in the drawing and all
      other sides shall be finished with white
      enamel paint. The side Storage (credenza)
      shall be provided with handles (Stainless
      Steel finish) and channels as per approval
      of the Project Consultant /Bank

      All exposed plywood to be finished with
      1mm thick laminate of approved make &
      shade and all exposed edges of table top &
      ply verticals to have 1”x4” T.W. lipping. All
     exposed T.W.sections to be melamined and
     internal surfaces to have white enamel plaint
     as directed item to include ploywood boxing
     all necessary hardware and fitting in
     Stainless Steel finish, lipping to all edge
     etc. complete in all respect.
14   Staff Table                                   Each
     Providing and fixing in position Staff Table
     of size 4‟6”X2‟ 6” as per drawing No. (5)
     byusung 25mm thick plywood for top and
     18mm thick plywood for all other horizontal
     and vertical member. Telescopic CPU
     Stand/ready made Keyboard tray shall be
     provided.
     Drawer unit as per drawing shall be
     provided with multipurpose Godrej locks in
     each drawer. Facia of drawer unit shall be
     finished with 1mm thick laminated and all
     other side shall be finished with white
     enamel paint. The drawer will be provided
     with handles (Stainless steel finish) and
     channel as per approvel of the project
     Consultant/Bank.
     All exposed plywood surface to be finished
     with 1mm thick. Laminated of approved
     make and shade, and all exposed edges of
     table top and ply vertical to have 1”X1/4”
     T.W. lipping. All exposed T.W. sections to
     be melamined and internal surface to have a
     white enamel paint as Directed. The items to
     include plywood boxing, All necessary
     hardware and fittings in stainless steel
     finish, lipping to all its edges etc.complete
     in all respects.
15   Full height storage/ low Height Storage/      Sq.ft.
     Back Storage (Credenza).
     Providing and fixing in position full height
     Storage/ Low Height Storage/ Back Storage
     ( Credenza) as shown in DRg.No.(8),(9) &
     (10) respectively using plywood of required
     thickness finished with 1 mm thick
     laminated as shown in the Drawing and all
     other sides shall be finished with white
     enamel paint as details therein.
     The storage units shall be provided with
     handles.
     (Stainless Steel Finish) as per approval of
     the projects consultant/ Bank .
     All exposed plywood surface to be finished
     with 1 mm thk .laminated of approved make
      & shed and all exposed edges of plywood to
      have 1”x ¼ “ T.W. Lipping. All Exposed
      T.W. section to be melamined in matching
      colour laminates and internal surface to have
      white enamel paint as directed. Item to
      include all necessary Hardware and Fitting
      in Stainless Steel finish, Godrej multi
      purpose locks including magnetic ball
      catcher etc. compete in all respect.
16.   Side Table.                                   1 No    No
      For specification/size please contact with
      Architect.
17.   Slip Counter.                                  1 No   No1
       For specification/size please contact with   4ft
      Architect.
18.   Sofa
      3 Seater                                       No1    no
      4 Seater                                      No2

19.   Providing blinds to windows                  Sq.ft.   50
      For specification/size please contact with
      Architect.
20.   Paneling of 3 columns up to height of 8.     lumsum   .
      ft
21.   TOTAL
QUOTATION DOCUMENT OF ELECTRICAL WORKS OF
Charmorshi,ChandurBazaar,Wadsa           BRANCH
(Time limit for completion of works is 10 days)
Sr.No. Item                         Quantity    Rate Amount.
1.      Point Wiring and fixing     Nos.
        of point wiring for Light,
        fan, bell,
        ex.fan(concealed type)
        with ISI 2X1.5 mm
        copper pvc insulated wire
        1100v grade with ISI
        mark Modular switches
        (Anchor roma)
1A.     Same as above but           Nos.
        independent 5 Amp
        switch & socket (Anchor
        roma)
2.      Providing 16Amp             Nos
        independent plug point
        (concealed type) with
        16amp. Modular switches
        & 2x2.5sq.mm. &1x1.5
        sq.mm. copper wire for
        Air
        conditioner/inverter/water
        cooler/Note counting
        Machine.
3.      Providing telephone         Nos.
        points modular jack type
        socket on wall/partition
        with suitable concealed
        MS box & plate including
        wall cutting and making
        the surface as it is.
4.      Supplying and erecting      Nos.
        unbreakable concealed
        type (03 to 18 module)
        modular switch box and
        plate duly erected flush to
        wall with required
        chiseling and with cement
        mortar/pop as per
        requirement to match the
        background in approval
        manner.
5.      Supply and fixing of ding No.
        dong bell of approved
        make along the necessary
     connection
6.   Supply and erecting           Nos.
     ceiling fans with double
     ball bearing 1200mm.
     sweep complete erected
     in position, canopy
     &down road with hook,
     rubber bushing, clamp,
     nut & bolts etc.
     (Crompton/havells/Bajaj
     make)
7.   Supplying and erecting of
     heavy fresh air cum
     exhaust fan light duty 300
     mm. metallic body.
     Olastic blades
     (Crompton/havells/Bajaj
     make)
8.   Supply, installation,         Nos.
     testing, commissing of
     indoor recessed mounting
     Down Lighter 2x18w
     CFL mat finish (similer to
     havells/Bajaj)
9.   Supply installation           Nos.
     testing, commissioning
     approved make 1x40 watt
     surface mounting fitting
     (Philips/bajaj)
10   Supplying and erecting        Nos.
     Philips/Bajaj/Crompton
     make 1x40 watt hanging
     mirror optic type mace
     CRCA sheet not less than
     0.7 mm. thickness Silver
     on reflector side and gray
     on other surface complete
     with one 40 watt copper
     VPIT ballast, lock type
     tow holder, starter, holder
     and condenser duly wired
     up suitable for 250V
     supply and erect with the
     flexible twin core wire
     24/0.2 mm. and with
     necessary material and
     marking Sr. No. and date
     of erection (similer to
     havells/Bajaj) MS
     conduct with pipe (Ht. as
      per site situation) with
      socket check nute

11.   Providing & fixing 4 pole    Nos.
      isolator 63 amp. 415 volt
      of approved make.
12.   Providing and fixing 10      Nos.
      to 32 amp. SPMCB of
      approved make
13.   Earthing:-                   No.
      B-type earthing with 2”
      B-class G.I pipe,
      Charcoal, salt with
      necessary and required
      material
14    Special Earthling for        No.
      meter distribution wiring,
      with 8 no copper tar

15.   Distribution panel board     No.
      with concealed box
16.   Providing and fixing of      Nos.
      step type regular
      (moduler)
17.   Providing and fixing 100     Nos.
      A porcelain kit katfor
      mains on wood board.
18.   Automatic Change over        No.
      switch (for Genset)
      Supply and erecting
      automatic change over
      MCB in provided
      distribution
      board(MDS,L&T)
19    DPMCB (For UPS               No.
      Supply) supplying and
      erecting two pole MCB‟s
      40 Amp,Breaking
      capacity with required
      wiring connection with
      separate MS MCB
      connection box for UPS
      changing and UPS
      outgoing supply.
20    Providing & fixing           No.
      mirror optic 2Feetx2Feet
      (36x2 rod) Sqare fitting
      make Wipro/ Bajaj.
21   Providing and fixing
     brunch of wires of
     various size & thickness
     are as follow with 2.5 *
     1.5 sq. mm. copper pace
     insulated wire for earth
     from main DB to switch
     board, bus bar to DB
     including floor/wall
     cutting & making the
     surface as it is complete
     & as directed by
A    architect:                  Mtr
B    Do as above but use in
     wire 4wire x6sq. mm.        mtr
     wire.
C    Do as above but use in      Mtr.
     wire 2 x 4 sq. mm. wire.
D    Do as above but use in      Mtr
     wire 2 x 2.5 sq. mm. wire
     Do as above but use in
     wire 2 x 1.5 sq. mm. wire
E    Do as above but use 2
     pair telephone wire

21   AC point wiring with AC
     starter & Ac socket
     (MDS,L&T)
22   Wall fan
     TOTAL
                           Bank of India Nagpur 2 Zone
                       Tender for Empanelled venders only
       Name of work :- Interior Furnishing of Bank of India Chamorshi Branch.
       Cover should be reach on or before 20.08.2011 at following address.
       Bank of India, Zonal Office Nagpur 2 Zone, ADMS Dept. II nd Floor,
       Bank of India Building, S.V.Patel Marg, Kingsway, Nagpur 440 001.
             QUOTATION DACUMENT OF FURNITURE WORK
Sr.   Description of Item                            Unit    Qty.   Rate        Amount
No.                                                                 ( in Rs.)   ( in Rs. )
1.    ENTERANCE DOOR.                              Sft.      65
      Providing and fixing in position
      Aluminium glass door as per the standard
      drawings.
      Full hight partitions                        Sft.      400
2.    Providing & fixing partly glazed and partly
      panelled portions for store & ups Portion
      & at required position as per drawings and
      as directed by the Architect. ( Glazed
      portion at required places) as per design
      and drawing made out of aluminium
      section frame work of size 40x40 mm @
      400 mm c/c covered with century of
      approved hade and esign on both side of
      partions & as directed by the Architect.
      The glazed portion shall be of 10 mm thick
      plain/clear glass with necessary etching
      work as directed for partion and Doors as
      per drawing and as directed by the
      Architect. The glass shall be fixed with
      T.W. beading of size 35x25 mm with
      Necessary groves etc. complete. The
      Partition shall have overall thickness of 60
      mm.
3     Providing & fixing in position partly glazed   Sq.ft   60
      haft height (4’) partions work shown in
      drawing No.’s
4    False Ceiling (Armstrong)                    990   Sq.ft
    Providing and fixing in position false
    ceiling in Armstrong 600x600 mmx 15/16
    mm Dune supreme RH 99 Prima tile with
    Tegular edge framework as specified by
    Armstrong co. with suspenders wherever
    required. Making necessary framework for
    A.C. ducting. If any, and cutouts for
    diffusers and light fittings. Tapping and
    finishing to line and level, including
    making grooves and trap doors for AC unit
    in 18 mm thick MR grade plywood with SS
    Hinges and locks with white plastic
    Emulsion Paint etc. complete in all
    respects.
5    STORGE RACK IN STORE ROOM                    18    Rft
     Providing & fixing storage racks of 10‟0”
     height & at required position made out of
     18 mm thick MR grade ply of ISI Mark
     confirming to S-303finished with 1.0 mm
     thick laminate century. As per drawing and
     as erected by Architect. The Frame shall
     be made out of 18 mm thick . MR grade
     ply confirming to .S. 303 finished with 1.0
     mm thick laminate as per drawing and as
     directed by Architect. The shutters shall
     have overall thickness of 25 mm with
     made out 12 mm thick MR grade ply ISI
     mark confirming to ISI 303 shuter frame
     work shall be made out of size 75
     mmx12mm and 6m thick ply pressed on
     both sides tgo hae thickness of 25mm with
     T,W, Beading on edges of shutters
     finished with 1.0 mm thick Laminate in
     multi colour as per design and drawings
     and of approved shade and colour on
     external face. All internal shelves made out
     of 12 mm thick MR grade ply and finished
     with 0.8 mm thick laminate on top side &
     including all internal surfaces but
     excluding hidden faces. Shutters should
     have brass hinges with ball
     catchers,magnetic catchers, brass screws
     all internal hidden surfaces shall be
     painted with oil paint in two coats over a
     coat of primer with finishing, erection etc.
     complete
6     STORAGE RACK
     Providing & Fixing storage racks of 7‟0”     11    RMFT
     height & at required position made out of
    18 mm thick MR Grade ply of ISI Mark
    confirming to




    S-303 finished with 1.0 mm thick laminate
    century, As per drawsing and as erected by
    Architect. The Frame shall be made out of
    18 mm thick. MR Grade ply confirming to
    S.303 finished with 1.0 mm thick laminte
    as per drawing and as directed by
    Architect. The shutters shall have overall
    thickness of 25 mm made out of 12 mm
    thick MR grade ply ISI mark confirming to
    ISI 303 shutter frame work shall be made
    out of size 75mmx12mm and 6mm thick
    ply pressed on both sides to have thickness
    of 25 mm with T.W. Beading on edges of
    shutters finished with 1.0 mm thick.
    Laminate in multi colour as per design and
    drawing and of approved shade and colour
    on external face. All internal shelves made
    out of 12 mm thick MR grade ply and
    finished with 0.8 mm thick laminate on top
    side & including all internal surfaces but
    excluding hidden faces. Shutters should
    have Brass hinges with all catches,
    magnetic catchers, brass screws, all
    internal hidden surfaces shall be painted
    with oil paint in two coats over a coat of
    primer with finishing, erection etc.
    complete
7   LOW height storage rack 4’0”                6   RMt
    (Specification as above )
                                       //3//
Sr. Description of Item                      Unit    Qty.   Rate        Amount
No.                                                         ( in Rs.)   ( in Rs. )
8    Cash Counter                            RFT     10
     Providing and fixing partly glazed and
     partly panelled T.W. Door to cash
     cabin and at required postion made out
     of C,P.Teak wood framework of 75x35
     mm @375 mm c/c both ways with 6mm
     thick ply of MR grade of ISI mark
     confirming to IS -303 on both sides and
     finished with 1.00 mm thick laminate
     century as directed bhy Architect. The
     upper portopm pf the sjitter sja;; jave
     5mm thick glass panel above 900 mm
     or as directed from floor level with
     necessary etching and with T.W.
     beading of size 25x12 mm the shutter
     have brass hinges, Night latch of
     Godrej make/mortise lock/Aldrops as
     per reqauirement, Brass Tower Bolt
     150 mm long, Brass Handle 100mm
     ,Door stopper with Erection, finishing
     etc.    complete and as directed by
     Architect.
9   Cash cabin portion:                      Sq.ft   140
    Providing and fixing 7’ high partly
    glazed partition for cash cabins as per
    drawing No. (2-A,2-B,2-C,2-D & 2-E)
    including door drawing no. (12) in frame
    work at 2’x1 1/2 “ T.W. section and /or
    as per frame work shown in the
    drawings with 6 mm plywood on both
    sides finished with 1 mm thick laminates
    of approved shade and colour as shown
    in drawings. Item to include 8 mm thick
    glass with etching and frosting as per
    design and 2’x2” T.W. member for door
    sides and glass sides and T.W. door
    frame to take 8 mm thick with etchings
    and frosting
    The door will be provided with T.W.
    louvers finished in melamine polish of
    matching laminate colour. The doors are
    also to be provided with Godrej Night
    latch two wooden trays are also to be
    provided as per drawing. Necessary
    cutouts to provide in the glass and the
     edges of the glass     cutouts are to be
     finished in mirror polish. All exposed
     T.W. surfaces to be finished in melamine
     polish of matching laminate colour as
     directed including all necessary stainless
     steel finish fitting/hardware. Door
     closers. Godrej locks and wood
     preservative paint etc. as per list of
     approved material and as approved by
     the project consultant/Bank complete in
     all respects.
     Front Office Counter
     Providing and fixing office counter with 14    Rft
     25 mm thick top supported on 18 mm
     thick ply 1.2 mm c/c as per detailed
     drawing . Exposed surface of the couner
     has to be covered with 1 mm thick
     laminate. CPU & keyboard will be fixed
     to the ply. 5, mm thick glass will fixed at
     the top as per details of roasting as per
     drawing .

10      Painting (internal)
        Providing & applying white plastic
        emultion paint of Ashion Paint/ICI
        Deluxe/Berger & Sporty Yellow –
        X104 shade of Royal Luxury emulation
        of Asian paints in minimum 2 coats
        including scrapping, opening of
        existing cracks, filling up of “V” cracks
        with Epoxy expandable putty to
        required depth, making good weak
        plastered/unplastered surface with
        cement plaster wherever required. Item
        to include plaster of Paris, primer,
        putty, & making good existing surface
        to receive new paint including cleaning
        on completion of painting work etc.
        complete in all respect.
11        Providing and fixing plywood box 3                    Nos.
          The roller shutter.




                                                                        --4--

12    Slip Counter.                                      1 No    No1
      For specification/size please contact with        4ft
      Architect.
13.   Manager’s Table /Officer’s Table
                                                        Manager 1 No
      Providing and fixing in position manager
      table of made out of 18 mm hick ply and 1
      mm thick laminate & side storage with
      locking arrangement paint polishing etc.
      complete ( AS per Bank Standard Drgs).
      Officer’s Table
      Providing and fixing in position officer table
14    of made out of 18 mm thick ply & 1 mm thick       3 nos   3 nos
      laminate & side storage with locking
      arrangement paint polishing etc. complete (
      As per Banks standard Drgs)




                                                --7--




15        Sofa set with hand rest & low high
          back cushioned out 18 mm thick M.R
          grade plywood including all cushion
          work in 5 mm sitting base and 50 mm
          (b-ck) u from of 32 density (151
          marked ) and 25 mm thick .Rubber
         form over u foam of approved make
         for sea & backside with cloth
         approximate 250/- permit.             1 No.           1 no
         4 Seater Rs. 500/- per mt. upholstery

16.                                                  Sft.
         Venation Blinds
         For specifications/size please contact
         with Architect.
17.
         Paneling to columns: P & F 18 mm/6 mm       3         3 Nos.
         ply on the column as per drawing &
         design with 1 mm laminate on the top
         including 75 mm th. Designed Goth @ 2.1
         m ht. with melamine polish to all T.W.
         members as per the drawing and
         directions given by the Architect.

              TOTAL




Furniture
Make of Material:
1. Aluminium pipe : Jindal make 1.5 mm thick
2. Plywood              : Green(Premium) & Century(Red Core)only
No substitute like echotech & sainik will be accepted
3. laminates            : Green land & century 1 mm thick
4. Venetian Blinds      : Vista Lavlor only
5. Hardware             : Earl Bihari fittings only
6. Glass                : modi/Asariflot/saint gobain ( including Itchigs & frosting)
7. Teak wood & Beadings : All teak wood members should be red in colour & properly
seasoned & should be approved by the architect before use
8. Polish               : The polish will be melamine only
Note : 1. Any other material required will have to be brought as per the decision of Bank &
Architect only. The materials will be rejected if brought without the notice of Bank/architect.
2. Contractors are requested to visit the site, understand the tender drawings, and carry out
the work as per the instructions & specification given by the architect. No substitute material
will be entertain or brought to the site.
                           Bank of India Nagpur 2 Zone
                       Tender for Empanelled venders only
       Name of work :- Interior Furnishing of Bank of India Wadsa Branch.
       Cover should be reach on or before 20.08.2011 at following address.
       Bank of India, Zonal Office Nagpur 2 Zone, ADMS Dept. II nd Floor,
       Bank of India Building, S.V.Patel Marg, Kingsway, Nagpur 440 001.
             QUOTATION DACUMENT OF FURNITURE WORK
Sr.   Description of Item                             Unit    Qty.   Rate        Amount
No.                                                                  ( in Rs.)   ( in Rs. )
1.    ENTERANCE DOOR.                             Sft.        70
      Providing and fixing in position
      Aluminium glass door as per the standard
      drawings.
      Full hight partitions                       Sft.        360
2.    Providing & fixing partly glazed and partly
      panelled portions for store & ups Portion &
      at required position as per drawings and as
      directed by the Architect. ( Glazed portion
      at required places) as per design and
      drawing made out of aluminium section
      frame work of size 40x40 mm @ 400 mm
      c/c covered with century of approved hade
      and esign on both side of partions & as
      directed by the Architect. The glazed
      portion shall be of 10 mm thick plain/clear
      glass with necessary etching work as
      directed for partion and Doors as per
      drawing and as directed by the Architect.
      The glass shall be fixed with T.W. beading
      of size 35x25 mm with Necessary groves
      etc. complete. The Partition shall have
      overall thickness of 60 mm.

3     HALF HT PARTITION                               Sq.ft   35
      Providing & fixing in position partly glazed
      haft height (4ft) partions work shown in
      drawing with TW memers 50mm x 60mm
      @ 675 c/c with 6mm ply on both sides
      covered with imm laminate on both sides .
      The 5 mm thick glass has to be
      etched/frosted as per the requirement &
      detailed drawings and as directed by the
      Architect including melamine polish to the
      Tw eadings till the satisfaction & as per the
      design & directions given by the Architet.
4    False Ceiling (Armstrong)
    Providing and fixing in position false        1000   Sq.ft
    ceiling in Armstrong 600x600 mmx 15/16
    mm Dune supreme RH 99 Prima tile with
    Tegular edge framework as specified by
    Armstrong co. with suspenders wherever
    required. Making necessary framework for
    A.C. ducting. If any, and cutouts for
    diffusers and light fittings. Tapping and
    finishing to line and level, including
    making grooves and trap doors for AC unit
    in 18 mm thick MR grade plywood with SS
    Hinges and locks with white plastic
    Emulsion Paint etc. complete in all
    respects.
5    STORGE RACK IN STORE ROOM
     Providing & fixing storage racks of 7‟0”     34     Rft
     height & at required position made out of
     18 mm thick MR grade ply of ISI Mark
     confirming to S-303finished with 1.0 mm
     thick laminate century. As per drawing and
     as erected by Architect. The Frame shall be
     made out of 18 mm thick . MR grade ply
     confirming to .S. 303 finished with 1.0
     mm thick laminate as per drawing and as
     directed by Architect. The shutters shall
     have overall thickness of 25 mm with
     made out 12 mm thick MR grade ply ISI
     mark confirming to ISI 303 shuter frame
     work shall be made out of size 75
     mmx12mm and 6m thick ply pressed on
     both sides tgo hae thickness of 25mm with
     T,W, Beading on edges of shutters
     finished with 1.0 mm thick Laminate in
     multi colour as per design and drawings
     and of approved shade and colour on
     external face. All internal shelves made out
     of 12 mm thick MR grade ply and finished
     with 0.8 mm thick laminate on top side &
     including all internal surfaces but
     excluding hidden faces. Shutters should
     have brass hinges with ball
     catchers,magnetic catchers, brass screws
     all internal hidden surfaces shall be
     painted with oil paint in two coats over a
     coat of primer with finishing, erection etc.
     complete
6     STORAGE RACK
     Providing & Fixing storage racks of 7‟0”
     height & at required position made out of
    18 mm thick MR Grade ply of ISI Mark
    confirming to

    S-303 finished with 1.0 mm thick laminate
    century, As per drawsing and as erected by
    Architect. The Frame shall be made out of
    18 mm thick. MR Grade ply confirming to
    S.303 finished with 1.0 mm thick laminte
    as per drawing and as directed by
    Architect. The shutters shall have overall
    thickness of 25 mm made out of 12 mm
    thick MR grade ply ISI mark confirming to
    ISI 303 shutter frame work shall be made
    out of size 75mmx12mm and 6mm thick
    ply pressed on both sides to have thickness
    of 25 mm with T.W. Beading on edges of
    shutters finished with 1.0 mm thick.
    Laminate in multi colour as per design and
    drawing and of approved shade and colour
    on external face. All internal shelves made
    out of 12 mm thick MR grade ply and
    finished with 0.8 mm thick laminate on top
    side & including all internal surfaces but
    excluding hidden faces. Shutters should
    have Brass hinges with all catches,
    magnetic catchers, brass screws, all
    internal hidden surfaces shall be painted
    with oil paint in two coats over a coat of
    primer with finishing, erection etc.
    complete
7   LOW height storage rack 4’0”                  4   Rft
    (Specification as above )
                                      //3//
Sr. Description of Item                      Unit   Qty.    Rate        Amount
No.                                                         ( in Rs.)   ( in Rs. )
8    Cash Counter
     Providing and fixing partly glazed and RFT     10
     partly panelled T.W. Door to cash
     cabin and at required postion made out
     of C,P.Teak wood framework of 75x35
     mm @375 mm c/c both ways with 6mm
     thick ply of MR grade of ISI mark
     confirming to IS -303 on both sides and
     finished with 1.00 mm thick laminate
     century as directed bhy Architect. The
     upper portopm pf the sjitter sja;; jave
     5mm thick glass panel above 900 mm
     or as directed from floor level with
     necessary etching and with T.W.
     beading of size 25x12 mm the shutter
     have brass hinges, Night latch of
     Godrej make/mortise lock/Aldrops as
     per reqauirement, Brass Tower Bolt
     150 mm long, Brass Handle 100mm
     ,Door stopper with Erection, finishing
     etc.    complete and as directed by
     Architect.
9   Cash cabin portion:
    Providing and fixing 7’ high partly 260         Sq.ft
    glazed partition for cash cabins as per
    drawing No. (2-A,2-B,2-C,2-D & 2-E)
    including door drawing no. (12) in frame
    work at 2’x1 1/2 “ T.W. section and /or
    as per frame work shown in the
    drawings with 6 mm plywood on both
    sides finished with 1 mm thick laminates
    of approved shade and colour as shown
    in drawings. Item to include 8 mm thick
    glass with etching and frosting as per
    design and 2’x2” T.W. member for door
    sides and glass sides and T.W. door
    frame to take 8 mm thick with etchings
    and frosting
    The door will be provided with T.W.
    louvers finished in melamine polish of
    matching laminate colour. The doors are
    also to be provided with Godrej Night
    latch two wooden trays are also to be
    provided as per drawing. Necessary
    cutouts to provide in the glass and the
     edges of the glass     cutouts are to be
     finished in mirror polish. All exposed
     T.W. surfaces to be finished in melamine
     polish of matching laminate colour as
     directed including all necessary stainless
     steel finish fitting/hardware. Door
     closers. Godrej locks and wood
     preservative paint etc. as per list of
     approved material and as approved by
     the project consultant/Bank complete in
     all respects.
     Front Office Counter
     Providing and fixing office counter with 12.6   RFT
     25 mm thick top supported on 18 mm
     thick ply 1.2 mm c/c as per detailed
     drawing . Exposed surface of the couner
     has to be covered with 1 mm thick
     laminate. CPU & keyboard will be fixed
     to the ply. 5, mm thick glass will fixed at
     the top as per details of roasting as per
     drawing .

10      Painting (internal)
        Providing & applying white plastic
        emultion paint of Ashion Paint/ICI
        Deluxe/Berger & Sporty Yellow –
        X104 shade of Royal Luxury emulation
        of Asian paints in minimum 2 coats
        including scrapping, opening of
        existing cracks, filling up of “V” cracks
        with Epoxy expandable putty to
        required depth, making good weak
        plastered/unplastered surface with
        cement plaster wherever required. Item
        to include plaster of Paris, primer,
        putty, & making good existing surface
        to receive new paint including cleaning
        on completion of painting work etc.
        complete in all respect.
11        Providing and fixing plywood box 02                  Nos.
          The roller shutter.




                                                                             --4--

12    Slip Counter.                              .              1 No   No1
      For specification/size please contact with               4ft
      Architect
13.   Manager’s Table /Officer’s Table
                                                       Manager 1 No
      Providing and fixing in position manager
      table of made out of 18 mm hick ply and 1
      mm thick laminate & side storage with
      locking arrangement paint polishing etc.
      complete ( AS per Bank Standard Drgs).
      Officer’s Table                                  3 nos
14                                                             3 nos
      Providing and fixing in position officer table
      of made out of 18 mm thick ply & 1 mm thick
      laminate & side storage with locking
      arrangement paint polishing etc. complete (
      As per Banks standard Drgs)
                                             --7--




15       Sofa set with hand rest & low high
         back cushioned out 18 mm thick M.R
         grade plywood including all cushion
         work in 5 mm sitting base and 50 mm
         (b-ck) u from of 32 density (151
         marked ) and 25 mm thick .Rubber
         form over u foam of approved make
         for sea & backside with cloth
         approximate 250/- permit.
         4 Seater Rs. 500/- per mt. upholstery 2 No.            no

16.                                                  Sft.
         Venation Blinds
         For specifications/size please contact
         with Architect.
17.
         Paneling to columns: P & F 18 mm/6 mm       3         3 Nos.
         ply on the column as per drawing &
         design with 1 mm laminate on the top
         including 75 mm th. Designed Goth @ 2.1
         m ht. with melamine polish to all T.W.
         members as per the drawing and
         directions given by the Architect.

              TOTAL




Furniture
Make of Material:
1. Aluminium pipe : Jindal make 1.5 mm thick
2. Plywood              : Green(Premium) & Century(Red Core)only
No substitute like echotech & sainik will be accepted
3. laminates            : Green land & century 1 mm thick
4. Venetian Blinds      : Vista Lavlor only
5. Hardware             : Earl Bihari fittings only
6. Glass                : modi/Asariflot/saint gobain ( including Itchigs & frosting)
7. Teak wood & Beadings : All teak wood members should be red in colour & properly
seasoned & should be approved by the architect before use
8. Polish               : The polish will be melamine only
Note : 1. Any other material required will have to be brought as per the decision of Bank &
Architect only. The materials will be rejected if brought without the notice of Bank/architect.
2. Contractors are requested to visit the site, understand the tender drawings, and carry out
the work as per the instructions & specification given by the architect. No substitute material
will be entertain or brought to the site.
                              NAGPUR ZONE –II
                     SPECIAL TERMS AND CONDITIONS
1. The prospective bidder is advised to visit site to get himself acquainted with the site
conditions, prior to submitting his bid.
2. The prices quoted should be inclusive of all taxes & duties, as applicable on date. No extra
payment will be released under any pretext what so ever in this regard.
3. The prices quoted should be inclusive of freight, handling, unloading at site in Banks‟s
premises at Chamorshi,Chandur Bazaar &Wads Branch.
4. Octroi charges as per NMC‟s present rates will be deemed to have been included in the
offered prices. No Octroi exemption certificate & / Or extra payment will be released in this
regard.
5. The rates offered will be inclusive of labor charges for handling, installation, testing,
commissioning & giving test & Trial to the satisfaction of the Banks‟ officer/consultant
appointed by the Bank.
6. Statutory permissions, preparation & approval of drawing by the electrical inspector &
approval of installation by him, prior to commissioning will be the contractors‟ responsibility
& no extra payment will be made to the contractor on this account. However payment of
Government‟s fee in this regard will be released to the contractor against production of
relevant document, or it may be paid by the Bank directly to the department by cheque.
7. All the work of transfer of power connections from the existing DB to new DB will be
carried out on Sunday or any non working day, so that the day to day works of the Banks is
not hampered.
8. Official charges of MSEDCL foe meter shifting shall be paid by the Bank against
MSEDL‟s demand note. However day to day follow up for getting the demand note &
charging the supply after shifting shall be the contractor‟s responsibility.
NOTICE TO TENDERERS :
1. Sealed quotations should be addressed to The Zonal Manager, Bank of India, Zonal Office
2ndFloor,Nagpur and super-scribed as Quotation for Electrical Work& Furnishing Work at
Wadsa ,Chandurbazaar& Chamorshi Branch respectively and sent as to reach the office
of The Zonal Manager, Bank of India., Zonal Office, 2nd Floor Nagpur not later than 2.00 PM
on 20/08/ 2011
2. Quotations shall be opened at the office of Zonal Manager,Bank of India, Zonal Office ,
2nd Floor Nagpur on the 20/08/2011 at5.30 PM. The rates quoted shall be valid for 90 days
from the date of opening,(For any other details including plans please contact Zonal
Office )
3. The Zonal Manager ,Bank of India, Zonal Office, 2nd Floor, Nagpur does not bind himself
to accept the lowest or any quotation and reserves the right to accept or reject any or all the
quotations whether in whole or in part without assigning any reason for doing so. The Bank
reserves the right to negotiate with the lowest quotations/s .
4. Within seven days of the receipt of intimation from the owner of acceptance of his/their
quotation, the successful tenderer shall be bound to implement the contract by signing the
agreement in accordance with the draft agreement and the conditions of contract with the
owner.
5. The rates quoted by the contractor should include all charges for scaffolding, materials,
labour, hire for any tools, marking out and clearing of the site as mentioned in the
specifications. The rate quoted by the tenderer will be deemed to be for the finished work to
be measured at site. The rates shall be inclusive of all applicable taxes, sales tax,octroi duty,
works contract tax Provident Fund, Insurance etc. levied by any Government or any public
body. The contractor shall abide by the rules of Minimum Wages Act and child Labor act
and keep the Bank indemnified regarding the same.
6. The rate shall be binding to the Contractor for all the tender items till the completion of
the work irrespective of variation in market rates of material and labour.
7. Special attention of the tenderer is drawn to the alternative items in the schedule of
quantities. The rates and amount for these alternative items. If any, shall be duly filled in. The
Bank reserves the right to adopt any of the alternative items, after scrutinizing and deciding
upon the tenders or later when the work is being executed.
8. The successful tenderer should make own arrangement to obtain all materials required for
the work.
9. The various materials stored on site shall be protected from the fire or rains etc. and the
contractor shall be responsible for any damage caused to the Bank for the same.
10. The contractor shall allow enough facilities to the sub-contractors employed by the Bank
and should co-operate with them and that small holes etc. made by these sub-contractors to
the structure shall be properly corrected by the general contractor without any prejudice and
extra cost whatsoever.
11. The Bank reserves the right to omit any item or items or part thereof while execution of
the work for which contractor shall not claim any compensation whatsoever.
12. The contractor will have to follow the instructions and guidelines as issued to him by the
Bank. If any work is not carried out satisfactory or to the required standard in the opinion of
architect/Bank the contractor will have to rectify it again at his own cost, without any
additional payment and without any challenge.
I/We herby declare that I/We have read and understood the above instructions for the
guidance of the tenderer.
Date:
Seal                                                      Signature & Stamp of the
Tenderer
To,
The Zonal Manager,
Bank of India
Zonal Office 2nd Floor,
S.V.PatelMarg, Kingsway
Nagpur Zone-II, Nagpur

From :
-------------------------------------

-------------------------------------

----------------------------------------

Sub – Tender for the Electrical Work at Chandur Bazaar,Chamorshi &Wadsa
Branch.

Dear Sir,

With reference to the tender invited by you for above mentioned work, I/We here by offer to
execute the work. I/w e have examined and studied carefully all the drawings, specifications,
conditions of contract, site and agree to comply with them, I/we agree to complete the whole
work wihin the stipulated time from the date of work order. I/We are aware that any of
items/s can be cancelled or replaced and quantity of any of items can be increased or
decreased at any time by the Architect OR Bank, for which I/We shall not claim extra.




                                                                Yours Faithfully


                                                          Contractors‟ Signature
                                                          (with stamp & Address)
To,
The Zonal Manager,
Bank of India
Zonal Office 2nd Floor,
S.V.PatelMarg, Kingsway
Nagpur Zone-II, Nagpur

From :
-------------------------------------

-------------------------------------

----------------------------------------

Sub – Tender for Interior Furnishing Work at Chamorshi,Chandur bazaar & Wadsa
Branch.

Dear Sir,

With reference to the tender invited by you for above mentioned work, I/We here by offer to
execute the work. I/w e have examined and studied carefully all the drawings, specifications,
conditions of contract, site and agree to comply with them, I/we agree to complete the whole
work wihin the stipulated time from the date of work order. I/We are aware that any of
items/s can be cancelled or replaced and quantity of any of items can be increased or
decreased at any time by the Architect OR Bank, for which I/We shall not claim extra.




                                                                Yours Faithfully


                                                          Contractors‟ Signature
                                                          (with stamp & Address)
                      TENDER SENDING FORMAT
------------------------------------------------------------------------------------------------------------
Proposal No. NZO-II:ADMS:04                                         Date : 15.08.2011

Title of the Tender                            : Interior Furnishing work &ElectricalWork at our
.                                                Chamorshi,ChandurBazaar,Wadsa
Category                                       : Empanelled

Zone                                           : Nagpur II Zone

Items                                          : Interior Furnishing Work& Electrical Work

Tender Date                                    : 15.08.2011

Last Date of submission                        : 20.08.2011

Display from                                   : 15.08.2011

Display upto                                   : 20.08.2011

Description                                    : As per enclosed attachment



Please air Tender Notice on Banks Website


Zonal Manager
Nagpur 2 Zone

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:7
posted:8/31/2011
language:English
pages:47