Installing the Cisco VPN and SSL Clients

Document Sample
Installing the Cisco VPN and SSL Clients Powered By Docstoc
					Upgrading the Cisco VPN Client
PRIOR TO UPGRADING YOUR EXISTING VPN CLIENT, PLEASE CONNECT TO THE INFOR NETWORK (I.E.
ESTABLISH A VPN CONNECTION IF WORKING REMOTELY) AND DOWNLOAD/SAVE THE NEW CISCO CLIENT
VERSION 5.0.03 INSTALL FILE. THE INSTALL CAN BE OBTAINED BY DOUBLE-CLICKING HERE.(ACTIVATED
LATER) IF YOU ARE ACTIVELY USING A VPN CONNECTION YOU WILL BE INSTRUCTED AT A LATER POINT TO
DISCONNECT AND CLOSE YOUR VPN CONNECTION.

If you are currently using the Cisco VPN Client, you must uninstall the version you are using (even if it is the same or a
higher version than this install!).

NOTE: If you use your current Cisco VPN client to access customer networks and use their custom connection profiles
then please backup those profiles before proceeding with the uninstall. Double-click HERE to start the copy process.
Click Open, and Run when prompted. Once complete please proceed to Step 1.

If you do not have custom connection profiles please proceed to Step 1.

NOW YOU HAVE BACKED UP YOUR CISCO CONNECTIONS AND HAVE DOWNLOADED/SAVED THE NEW
INSTALLATION FILE. IF YOU ARE CURRENTLY CONNECTED TO INFOR VIA A VPN CONNECTION YOU MUST
DISCONNECT PRIOR TO CONTINUING WITH THESE INSTRUCTIONS OTHERWISE YOU COULD COMPROMISE
THE STABILITY OF YOUR MACHINE.




Uninstalling the current Cisco client
 Step: 1     Click the Windows Start button and select All Programs, Control Panel, Add/Remove programs.
             The following screen will display:
 Select the
Step: 2 Locate the VPN Client item and click Change/Remove. The following screen will display:




Step: 3     After a few minutes, the following screen will display:




Step: 4     Click Finish to reboot your machine.
Cisco full client install:

Step: 1 Close all running applications and browser windows.

Step: 2 Double click on InforCiscoVPN.exe that was saved to your desktop during the download phase.

The following screen will display:




Step: 3 Click OK to continue or Cancel to abort the installation. The following screens will display:
Step: 4 When complete click Yes to restart your computer.




Using the Full Cisco Client



Step: 1 Click the                    shortcut that was placed onto your Desktop.

The following screen will display:

Note: You may or may not have all the access sites listed below.
Step: 2 Note: You will notice that there are four standard access sites. Generally, you will connect to a region that
coincides with your current location:

Americas regions: Select Infor-RemoteAccess-Americas
Europe regions: Select Infor-RemoteAccess-EMEA
Asia regions:     Select Infor-RemoteAccess-APAC
                  Select Infor-RemoteAccess-China

Step: 3 Highlight your region and Click the Connect option (you can also double click the access site).

The following screen will display:




Step: 4 Enter your Domain\Username and Password using the format pictured above: i.e. infor\jdoe

Step: 5 Click OK. After a successful connection you will see the Cisco pad-lock in your System Tray.




To disconnect from VPN, right click the Lock icon and select Disconnect, (you can also double-click on the lock and select
Disconnect)

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:8/27/2011
language:English
pages:6