Docstoc

LEVERKNOB DEAD BOLT ENTRY SETS

Document Sample
LEVERKNOB DEAD BOLT ENTRY SETS Powered By Docstoc
					                                                                      LEVER/KNOB DEAD BOLT ENTRY SETS
CONTENTS
This section contains Complete Dead Bolt Entry Sets and Trim Only Dead Bolt Entry Sets. Complete Sets include
bronze trim, tubular passage latch, dead bolt, cylinder(s), spindle, fasteners and installation instructions. All Complete
Dead Bolt Entry Set part numbers begin with CS. Trim Only Sets include bronze trim, spindle, fasteners, and
installation instructions. No locks, cylinder(s) or latches are included. All Trim Only Dead Bolt Entry Set part numbers
begin with TS. Dead Bolt Entry Trim Sets can be machined to be compatible with most high quality latches and dead
bolts. The lock manufacturer, model number of lock, and cylinder type must be specified when ordering Trim Only Sets.
Refer to Section 2 for knob, lever, key cover and turn piece options.
TABLE OF CONTENTS:
400 Series Lever/Knob Dead Bolt Entry Sets                                                     Pages            5-2 – 5-10
600 Series Lever/Knob Dead Bolt Entry Sets                                                     Pages            5-11 – 5-14
OP700 Series Lever/Knob Dead Bolt Entry Sets                                                   Page             5-15
900 Series Lever/Knob Dead Bolt Entry Sets                                                     Pages            5-16 – 5-19
1200 Series Lever/Knob Dead Bolt Entry Sets                                                    Pages            5-20 – 5-21
Ridge Collection Lever/Knob Dead Bolt Entry Sets                                               Pages            5-22 – 5-24
Banded Corrugated Collection Lever/Knob Dead Bolt Entry Sets                                   Page             5-25
Hampton Collection Lever/Knob Dead Bolt Entry Sets                                             Page             5-26
Trellis Collection Lever/Knob Dead Bolt Entry Sets                                             Page             5-27
Deco Collection Lever/Knob Dead Bolt Entry Sets                                                Page             5-28
Corrugated Collection Lever/Knob Dead Bolt Entry Sets                                          Page             5-29
Bandbox Collection Lever/Knob Dead Bolt Entry Sets                                             Page             5-30
Hand Peened Collection Lever/Knob Dead Bolt Entry Sets                                         Page             5-31
Corduroy Collection Lever/Knob Dead Bolt Entry Sets                                            Page             5-32

ORDERING INSTRUCTIONS:

Complete Sets: Always provide quantity, item number, lever/knob number, function, patina, door handing, backset and
door thickness.

*Example of order for 900 Series lever x lever Complete Dead Bolt Entry Set.
QTY     ITEM#/LEVER#           FUNCTION            PATINA        HANDING                                          BACKSET                 THICKNESS
 1     CS-951PLD/L111        Single Cylinder        W1               RH                                            2 3/8”                   1 3/4”

Trim Sets: Always provide quantity, item number, lever/knob number, lock manufacturer, model number, and cylinder
type, patina, handing, backset, and thickness.

*Example of order for OP700 Series lever x lever Trim Only Dead Bolt Entry Set.
QTY     ITEM#/LEVER#         FUNCTION               PATINA      HANDING                                           BACKSET                 THICKNESS
 1     TS-OP700/L102 Baldwin 5513 Latch               S3             RH                                            2 3/8”                   1 3/4”
                           8231 Dead Bolt
                            Single Cylinder

Custom Sets: See Custom Ordering Instructions in the General Information section at front of binder.

DOOR HANDING GUIDE:
                               INSIDE                                                                                   INSIDE




                              OUTSIDE                                                                                  OUTSIDE
          Left Hand (LH)                     Right Hand (RH)                        Left Hand Reverse (LHR)                              Right Hand Reverse (RHR)


                                                                                                                                          Revised 02/02/11


                                                                                                                                                                    5-1
      Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                      A406 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

            2 1/2"       2 1/2"                              2 1/2"       2 1/2"                               2 1/2"       2 1/2"                               2 1/2"      2 1/2"




                                                                                                                                                        7 1/2"
                                                    7 1/2"
  7 1/2"




                                                                                                      7 1/2"
           CS-A406PLD                                        CS-A406PLD-DC                                     CS-A406PLD-PF                                     TS-A406PLD-FD
           -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
            dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
           -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with L-103 lever.
           -Shown with L-103 lever.                          -Shown with L-103 lever.                          -Shown with L-103 lever.
            OR                                                OR                                                OR
           TS-A406PLD                                        TS-A406PLD-DC                                     TS-A406PLD-PF
           -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.

    CS-A406PLD                       Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 7 1/2" exterior plate #EP-A406KC.
                                     2 1/2" x 7 1/2" interior plate #EP-A406TPC.
    CS-A406PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.

    CS-A406PLD-PF                    Patio function.
    TS-A406PLD-FD                    Full dummy. No key cover or turn piece.
    2 3/8" or 2 3/4" backset standard.
    1 3/8" minimum door thickness.
    Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
    Always specify lever/knob design.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

    TS-A406PLD                       Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 7 1/2" exterior plate #EP-A406KC.
                                     2 1/2" x 7 1/2" interior plate #EP-A406TPC.
    TS-A406PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.

    TS-A406PLD-PF                    Patio function.
    TS-A406PLD-FD                    Full dummy. No key cover or turn piece.
    Specify manufacturer and function of latch and lock to be used.
    Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
    Always specify lever/knob design.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                            5-2
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                          407 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Will not cover 2 1/8" bore.

             2"           2"                                     2"           2"                                 2"           2"                                   2"          2"




                                                                                                                                                        8 3/4"
  8 3/4"




                                                    8 3/4"




                                                                                                      8 3/4"
           CS-407PLD                                         CS-407PLD-DC                                      CS-407PLD-PF                                      TS-407PLD-FD
           -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
            dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
           -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with L-120 lever.
           -Shown with L-120 lever.                          -Shown with L-120 lever.                          -Shown with L-120 lever.
            OR                                                OR                                                OR
           TS-407PLD                                         TS-407PLD-DC                                      TS-407PLD-PF
           -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.

   CS-407PLD                       Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   2" x 8 3/4" exterior plate #EP-407KC.
                                   2" x 8 3/4" interior plate #EP-407TPC.
   CS-407PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.
   CS-407PLD-PF                    Patio function.
   TS-407PLD-FD                    Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   *Will not cover 2 1/8" bore.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
  TS-407PLD                        Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   2" x 8 3/4" exterior plate #EP-407KC.
                                   2" x 8 3/4" interior plate #EP-407TPC.
  TS-407PLD-DC                     Double cylinder. 1 3/4" minimum door thickness.
  TS-407PLD-PF                     Patio function.
  TS-407PLD-FD                     Full dummy. No key cover or turn piece.
  Specify manufacturer and function of latch and lock to be used.
  Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
  Always specify lever/knob design.
  *Will not cover 2 1/8" bore.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                            5-3
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                      A407 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Will not cover 2 1/8" bore.

             2"           2"                                     2"          2"                                  2"           2"                                    2"           2"




                                                                                                      9 1/4"
  9 1/4"




                                                                                                                                                        9 1/4"
                                                    9 1/4"




           CS-A407PLD                                        CS-A407PLD-DC                                     CS-A407PLD-PF                                     TS-A407PLD-FD
           -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
            dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
           -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with L-113 lever.
           -Shown with L-113 lever.                          -Shown with L-113 lever.                          -Shown with L-113 lever.
            OR                                                OR                                                OR
           TS-A407PLD                                        TS-A407PLD-DC                                     TS-A407PLD-PF
           -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
    CS-A407PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2" x 9 1/4" exterior plate #EP-A407KC.
                                    2" x 9 1/4" interior plate #EP-A407TPC.
    CS-A407PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.

    CS-A407PLD-PF                   Patio function.
    TS-A407PLD-FD                   Full dummy. No key cover or turn piece.
    2 3/8" or 2 3/4" backset standard.
    1 3/8" minimum door thickness.
    Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
    Always specify lever/knob design.
    *Will not cover 2 1/8" bore.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

    TS-A407PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2" x 9 1/4" exterior plate #EP-A407KC.
                                    2" x 9 1/4" interior plate #EP-A407TPC.
    TS-A407PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
    TS-A407PLD-PF                   Patio function.
    TS-A407PLD-FD                   Full dummy. No key cover or turn piece.
    Specify manufacturer and function of latch and lock to be used.
    Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
    Always specify lever/knob design.
    *Will not cover 2 1/8" bore.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                            5-4
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                        408 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

           2 1/2"       2 1/2"                               2 1/2"       2 1/2"                               2 1/2"       2 1/2"                               2 1/2"      2 1/2"




                                                    8 3/4"




                                                                                                      8 3/4"
  8 3/4"




                                                                                                                                                        8 3/4"
           CS-408PLD                                         CS-408PLD-DC                                      CS-408PLD-PF                                      TS-408PLD-FD
           -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
            dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
           -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with L-102 lever.
           -Shown with L-102 lever.                          -Shown with L-102 lever.                          -Shown with L-102 lever.
            OR                                                OR                                                OR
           TS-408PLD                                         TS-408PLD-DC                                      TS-408PLD-PF
           -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-408PLD                        Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 8 3/4" exterior plate #EP-408KC.
                                    2 1/2" x 8 3/4" interior plate #EP-408TPC.
   CS-408PLD-DC                     Double cylinder. 1 3/4" minimum door thickness.
   CS-408PLD-PF                     Patio function.
   TS-408PLD-FD                     Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-408PLD                        Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 8 3/4" exterior plate #EP-408KC.
                                    2 1/2" x 8 3/4" interior plate #EP-408TPC.
   TS-408PLD-DC                     Double cylinder. 1 3/4" minimum door thickness.
   TS-408PLD-PF                     Patio function.
   TS-408PLD-FD                     Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                            5-5
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                   A408 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

           2 1/2"       2 1/2"                          2 1/2"        2 1/2"                          2 1/2"       2 1/2"                         2 1/2"      2 1/2"




                                               9 1/4"
9 1/4"




                                                                                                                                         9 1/4"
                                                                                             9 1/4"
           CS-A408PLD                                   CS-A408PLD-DC                                 CS-A408PLD-PF                               TS-A408PLD-FD
           -Complete set with passage latch,            -Complete set with passage latch,             -Complete set with passage latch,           -Trim set only.
            dead bolt, cylinder and spindle.             dead bolt, cylinders and spindle.             dead bolt and spindle.                     -Full dummy.
           -Single cylinder.                            -Double cylinder.                             -Patio function.                            -Shown with K-208 knob.
           -Shown with K-208 knob.                      -Shown with K-208 knob.                       -Shown with K-208 knob.
            OR                                           OR                                            OR
           TS-A408PLD                                   TS-A408PLD-DC                                 TS-A408PLD-PF
           -Trim set only. No latch or dead bolt.       -Trim set only. No latch or dead bolt.        -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
         CS-A408PLD                  Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 9 1/4" exterior plate #EP-A408KC.
                                     2 1/2" x 9 1/4" interior plate #EP-A408TPC.
         CS-A408PLD-DC               Double cylinder. 1 3/4" minimum door thickness.
         CS-A408PLD-PF               Patio function.
         TS-A408PLD-FD               Full dummy. No key cover or turn piece.
         2 3/8" or 2 3/4" backset standard.
         1 3/8" minimum door thickness.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

     TS-A408PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 9 1/4" exterior plate #EP-A408KC.
                                     2 1/2" x 9 1/4" interior plate #EP-A408TPC.
     TS-A408PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
     TS-A408PLD-PF                   Patio function.
     TS-A408PLD-FD                   Full dummy. No key cover or turn piece.
     Specify manufacturer and function of latch and lock to be used.
     Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
     Always specify lever/knob design.


PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                            5-6
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                  409 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

       2 1/2"      2 1/2"                            2 1/2"       2 1/2"                             2 1/2"       2 1/2"                           2 1/2"      2 1/2"




                                                                                              10"




                                                                                                                                             10"
10"




                                               10"




      CS-409PLD                                      CS-409PLD-DC                                   CS-409PLD-PF                                   TS-409PLD-FD
      -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
       dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
      -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with K-201 knob.
      -Shown with K-201 knob.                        -Shown with K-201 knob.                        -Shown with K-201 knob.
       OR                                             OR                                             OR
      TS-409PLD                                      TS-409PLD-DC                                   TS-409PLD-PF
      -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.

      CS-409PLD                    Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                   2 1/2" x 10" exterior plate #EP-409KC.
                                   2 1/2" x 10" interior plate #EP-409TPC.
      CS-409PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
      CS-409PLD-PF                 Patio function.
      TS-409PLD-FD                 Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
      TS-409PLD                    Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                   2 1/2" x 10" exterior plate #EP-409KC.
                                   2 1/2" x 10" interior plate #EP-409TPC.
      TS-409PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
      TS-409PLD-PF                 Patio function.
      TS-409PLD-FD                 Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.


PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                             5-7
          Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                               A409 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

           2 1/2"     2 1/2"                              2 1/2"     2 1/2"                          2 1/2"     2 1/2"                              2 1/2"    2 1/2"




                                                                                                                                              11"
    11"




                                                                                               11"
                                                    11"



           CS-A409PLD                                     CS-A409PLD-DC                              CS-A409PLD-PF                                  TS-A409PLD-FD
           -Complete set with passage latch,              -Complete set with passage latch,          -Complete set with passage latch,              -Trim set only.
            dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.          dead bolt and spindle.                        -Full dummy.
           -Single cylinder.                              -Double cylinder.                          -Patio function.                               -Shown with L-114 lever.
           -Shown with L-114 lever.                       -Shown with L-114 lever.                   -Shown with L-114 lever.
            OR                                             OR                                         OR
           TS-A409PLD                                     TS-A409PLD-DC                              TS-A409PLD-PF
           -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.     -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-A409PLD                     Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 11" exterior plate #EP-A409KC.
                                  2 1/2" x 11" interior plate #EP-A409TPC.

   CS-A409PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.

   CS-A409PLD-PF                  Patio function.

   TS-A409PLD-FD                  Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5 1/2" center to center available. Please specify.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-A409PLD                     Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 11" exterior plate #EP-A409KC.
                                  2 1/2" x 11" interior plate #EP-A409TPC.
   TS-A409PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   TS-A409PLD-PF                  Patio function.
   TS-A409PLD-FD                  Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5 1/2" center to center available. Please specify.
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                               5-8
          Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                   410 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

         3"            3"                                3"           3"                                3"           3"                                3"          3"




                                                10"




                                                                                               10"
 10"




                                                                                                                                              10"
       CS-410PLD                                      CS-410PLD-DC                                   CS-410PLD-PF                                   TS-410PLD-FD
       -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
        dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
       -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with L-110 lever.
       -Shown with L-110 lever.                       -Shown with L-110 lever.                        OR
        OR                                             OR                                            TS-410PLD-PF
       TS-410PLD                                      TS-410PLD-DC                                   -Trim set only. No latch or dead bolt.
       -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-410PLD                      Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  3" x 10" exterior plate #EP-410KC.
                                  3" x 10" interior plate #EP-410TPC.
   CS-410PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   CS-410PLD-PF                   Patio function.
   TS-410PLD-FD                   Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-410PLD                     Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                 3" x 10" exterior plate #EP-410KC.
                                 3" x 10" interior plate #EP-410TPC.
   TS-410PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   TS-410PLD-PF                  Patio function.
   TS-410PLD-FD                  Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                               5-9
         Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                        A410 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

              3"           3"                                    3"          3"                                     3"           3"                                   3"         3"
11 1/2"




                                                    11 1/2"




                                                                                                                                                          11 1/2"
                                                                                                       11 1/2"
           CS-A410PLD                                         CS-A410PLD-DC                                      CS-A410PLD-PF                                      TS-A410PLD-FD
           -Complete set with passage latch,                  -Complete set with passage latch,                  -Complete set with passage latch,                  -Trim set only.
            dead bolt, cylinder and spindle.                   dead bolt, cylinders and spindle.                  dead bolt and spindle.                            -Full dummy.
           -Single cylinder.                                  -Double cylinder.                                  -Patio function.                                   -Shown with K-211 knob.
           -Shown with K-211 knob.                            -Shown with K-211 knob.                            -Shown with K-211 knob.
            OR                                                 OR                                                 OR
           TS-A410PLD                                         TS-A410PLD-DC                                      TS-A410PLD-PF
           -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
          CS-A410PLD                   Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                       3" x 11 1/2" exterior plate #EP-A410KC.
                                       3" x 11 1/2" interior plate #EP-A410TPC.
          CS-A410PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
          CS-A410PLD-PF                Patio function.
          TS-A410PLD-FD                Full dummy. No key cover or turn piece.
          2 3/8" or 2 3/4" backset standard.
          1 3/8" minimum door thickness.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

          TS-A410PLD                   Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                       3" x 11 1/2" exterior plate #EP-A410KC.
                                       3" x 11 1/2" interior plate #EP-A410TPC.
          TS-A410PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
          TS-A410PLD-PF                Patio function.
          TS-A410PLD-FD                Full dummy. No key cover or turn piece.
          Specify manufacturer and function of latch and lock to be used.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                              5-10
               Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                601 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

          3"           3"                           3"            3"                           3"            3"                           3"           3"




                                                                                                                                 13"
                                                                                      13"
                                           13"
13"




      CS-601PLD                                  CS-601PLD-DC                               CS-601PLD-PF                               TS-601PLD-FD
      -Complete set with                         -Complete set with                         -Complete set with                         -Trim set only.
       passage latch, dead bolt,                  passage latch, dead bolt,                  passage latch, dead bolt                  -Full dummy.
       cylinder and spindle.                      cylinders and spindle.                     and spindle.                              -Shown with K-205 knob.
      -Single cylinder.                          -Double cylinder.                          -Patio function.
      -Shown with K-205 knob.                    -Shown with K-205 knob.                    -Shown with K-205 knob.
       OR                                         OR                                         OR
      TS-601PLD                                  TS-601PLD-DC                               TS-601PLD-PF
      -Trim set only. No latch                   -Trim set only. No latch                   -Trim set only. No latch
       or dead bolt.                              or dead bolt.                              or dead bolt.



Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
      CS-601PLD                    Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                   3" x 13" exterior plate #EP-601KC.
                                   3" x 13" interior plate #EP-601TPC.
      CS-601PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
      CS-601PLD-PF                 Patio function.
      TS-601PLD-FD                 Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      Note: 5", 5 1/2", and 6" center to center available. Please specify.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

      TS-601PLD                    Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                   3" x 13" exterior plate #EP-601KC.
                                   3" x 13" interior plate #EP-601TPC.

      TS-601PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.

      TS-601PLD-PF                 Patio function.
      TS-601PLD-FD                 Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      Note: 5", 5 1/2", and 6" center to center available. Please specify.
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                   5-11
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                    A601 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

                3"          3"                                 3"          3"                            3"          3"                             3"          3"




                                                                                                                                       14 1/2"
   14 1/2"




                                                  14 1/2"




                                                                                            14 1/2"
             CS-A601PLD                                     CS-A601PLD-DC                             CS-A601PLD-PF                              TS-A601PLD-FD
             -Complete set with                             -Complete set with                        -Complete set with passage                 -Trim set only.
              passage latch, dead bolt                       passage latch, dead bolt,                 latch, dead bolt and spindle.             -Full dummy.
              cylinder and spindle.                          cylinders and spindle.                   -Patio function.                           -Shown with L-115 lever.
             -Single cylinder.                              -Double cylinder.                         -Shown with L-115 lever.
             -Shown with L-115 lever.                       -Shown with L-115 lever.                   OR
              OR                                             OR                                       TS-A601PLD-PF
             TS-A601PLD                                     TS-A601PLD-DC                             -Trim set only. No latch
             -Trim set only. No latch                       -Trim set only. No latch                   or dead bolt.
              or dead bolt.                                  or dead bolt.



Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-A601PLD                       Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                    3" x 14 1/2" exterior plate #EP-A601KC.
                                    3" x 14 1/2" interior plate #EP-A601TPC.
   CS-A601PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.
   CS-A601PLD-PF                    Patio function.
   TS-A601PLD-FD                    Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5", 5 1/2", and 6" center to center available. Please specify.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-A601PLD                       Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                    3" x 14 1/2" exterior plate #EP-A601KC.
                                    3" x 14 1/2" interior plate #EP-A601TPC.
   TS-A601PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.
   TS-A601PLD-PF                    Patio function.
   TS-A601PLD-FD                    Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5", 5 1/2", and 6" center to center available. Please specify.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                            5-12
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                              602 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

          3 1/2"       3 1/2"                      3 1/2"       3 1/2"                       3 1/2"       3 1/2"                       3 1/2"       3 1/2"




                                                                                                                                13"
                                                                                      13"
                                            13"
   13"




         CS-602PLD                                CS-602PLD-DC                              CS-602PLD-PF                              TS-602PLD-FD
         -Complete set with passage               -Complete set with                        -Complete set with passage                -Trim set only.
          latch, dead bolt, cylinder               passage latch, dead bolt                  latch, dead bolt and spindle.            -Full dummy.
          and spindle.                             cylinders and spindle.                   -Patio function.                          -Shown with L-108 lever.
         -Single cylinder.                        -Double cylinder.                         -Shown with L-108 lever.
         -Shown with L-108 lever.                 -Shown with L-108 lever.                   OR
          OR                                       OR                                       TS-602PLD-PF
         TS-602PLD                                TS-602PLD-DC                              -Trim set only. No latch
         -Trim set only. No latch                 -Trim set only. No latch                   or dead bolt.
          or dead bolt.                            or dead bolt.



Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.

   CS-602PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                 3 1/2" x 13" exterior plate #EP-602KC.
                                 3 1/2" x 13" interior plate #EP-602TPC.
   CS-602PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   CS-602PLD-PF                  Patio function.
   TS-602PLD-FD                  Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5", 5 1/2", and 6" center to center available. Please specify.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-602PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                 3 1/2" x 13" exterior plate #EP-602KC.
                                 3 1/2" x 13" interior plate #EP-602TPC.
   TS-602PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   TS-602PLD-PF                  Patio function.
   TS-602PLD-FD                  Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 5", 5 1/2", and 6" center to center available. Please specify.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                 5-13
         Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                      A602 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

            3 1/2"        3 1/2"                             3 1/2"         3 1/2"                      3 1/2"        3 1/2"                      3 1/2"       3 1/2"
15 1/4"




                                                                                            15 1/4"
                                                  15 1/4"




                                                                                                                                       15 1/4"
           CS-A602PLD                                       CS-A602PLD-DC                             CS-A602PLD-PF                              TS-A602PLD-FD
           -Complete set with passage                       -Complete set with passage                -Complete set with passage                 -Trim set only.
            latch, dead bolt, cylinder                       latch, dead bolt, cylinders               latch, dead bolt and spindle.             -Full dummy.
            and spindle.                                     and spindle.                             -Patio function.                           -Shown with K-209 knob.
           -Single cylinder.                                -Double cylinder.                         -Shown with K-209 knob.
           -Shown with K-209 knob.                          -Shown with K-209 knob.                    OR
            OR                                               OR                                       TS-A602PLD-PF
           TS-A602PLD                                       TS-A602PLD-DC                             -Trim set only. No latch
           -Trim set only. No latch                         -Trim set only. No latch                   or dead bolt.
            or dead bolt.                                    or dead bolt.


Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
          CS-A602PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                         3 1/2" x 15 1/4" exterior plate #EP-A602KC.
                                         3 1/2" x 15 1/4" interior plate #EP-A602TPC.
          CS-A602PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
          CS-A602PLD-PF                  Patio function.
          TS-A602PLD-FD                  Full dummy. No key cover or turn piece.
          2 3/8" or 2 3/4" backset standard.
          1 3/8" minimum door thickness.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.
          Note: 5", 5 1/2", and 6" center to center available. Please specify.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

          TS-A602PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                         3 1/2" x 15 1/4" exterior plate #EP-A602KC.
                                         3 1/2" x 15 1/4" interior plate #EP-A602TPC.
          TS-A602PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
          TS-A602PLD-PF                  Patio function.
          TS-A602PLD-FD                  Full dummy. No key cover or turn piece.
          Specify manufacturer and function of latch and lock to be used.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.
          Note: 5", 5 1/2", and 6" center to center available. Please specify.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                           5-14
               Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                     OP700 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

              3"           3"                                   3"           3"                                  3"            3"                                  3"          3"




                                                                                                    8 3/4"




                                                                                                                                                      8 3/4"
8 3/4"




                                                  8 3/4"



         CS-OP700PLD                                       CS-OP700PLD-DC                                    CS-OP700PLD-PF                                    TS-OP700PLD-FD
         -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
          dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
         -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with K-203 knob.
         -Shown with K-203 knob.                           -Shown with K-203 knob.                           -Shown with K-203 knob.
          OR                                                OR                                                OR
         TS-OP700PLD                                       TS-OP700PLD-DC                                    TS-OP700PLD-PF
         -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.            -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
         CS-OP700PLD                   Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                       3" x 8 3/4" exterior plate #EP-OP700KC.
                                       3" x 8 3/4" interior plate #EP-OP700TPC.
         CS-OP700PLD-DC Double cylinder. 1 3/4" minimum door thickness.
         CS-OP700PLD-PF                Patio function.
         TS-OP700PLD-FD                Full dummy. No key cover or turn piece.
         2 3/8" or 2 3/4" backset standard.
         1 3/8" minimum door thickness.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

         TS-OP700PLD                   Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                       3" x 8 3/4" exterior plate #EP-OP700KC.
                                       3" x 8 3/4" interior plate #EP-OP700TPC.
         TS-OP700PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
         TS-OP700PLD-PF                Patio function.
         TS-OP700PLD-FD                Full dummy. No key cover or turn piece.
         Specify manufacturer and function of latch and lock to be used.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                         5-15
               Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                      950 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available. Will not cover 2 1/8" bore.

               2"        2"                                    2"        2"                                 2"        2"                                 2"        2"




                                                                                                                                              8 3/4"
                                                   8 3/4"
   8 3/4"




                                                                                                 8 3/4"
            CS-950PLD                                       CS-950PLD-NKC-DC                              CS-950PLD-PF                                 TS-950PLD-FD
            -Complete set with passage latch,               -Complete set with passage latch,             -Complete set with passage latch,            -Trim set only.
             dead bolt, cylinder and spindle.                dead bolt, cylinders and spindle.             dead bolt and spindle.                      -Full dummy.
            -Single cylinder.                               -Double cylinder.                             -Patio function.                             -Shown with L-109 lever.
            -Shown with L-109 lever.                        -Shown with L-109 lever.                      -Shown with L-109 lever.
             OR                                             *Shown without key covers.                     OR
            TS-950ML                                         Must be specified NKC.                       TS-950ML-PF
            -Trim set only. No lock.                         OR                                           -Trim set only. No lock.
                                                            TS-950ML-DC
                                                            -Trim set only. No lock.


Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
  CS-950PLD                         Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2" x 8 3/4" exterior plate #EP-950KC.
                                    2" x 8 3/4" interior plate #EP-950TPC.
  CS-950PLD-DC                      Double cylinder. 1 3/4" minimum door thickness.
  CS-950PLD-PF                      Patio function.
  TS-950PLD-FD                      Full dummy. No key cover or turn piece.
  2 3/8" or 2 3/4" backset standard.
  1 3/8" minimum door thickness.
  Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
  Always specify lever/knob design.
  All functions available without key cover. Please add NKC to part number.
  *Will not cover 2 1/8" bore.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

  TS-950PLD                         Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2" x 8 3/4" exterior plate #EP-950KC.
                                    2" x 8 3/4" interior plate #EP-950TPC.
  TS-950PLD-DC                      Double cylinder. 1 3/4" minimum door thickness.
  TS-950PLD-PF                      Patio function.
  TS-950PLD-FD                      Full dummy. No key cover or turn piece.
  Specify manufacturer and function of latch and lock to be used.
  Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
  Always specify lever/knob design.
  All functions available without key cover. Please add NKC to part number.
  *Will not cover 2 1/8" bore.


PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                  5-16
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                               951 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available. Will not cover 2 1/8" bore.

         2"        2"                                2"          2"                               2"         2"                                2"        2"




                                                                                          10"




                                                                                                                                       10"
                                             10"
10"




      CS-951PLD                                    CS-951PLD-NKC-DC                             CS-951PLD-PF                                 TS-951PLD-FD
      -Complete set with passage latch,            -Complete set with passage latch,            -Complete set with passage latch,            -Trim set only.
       dead bolt, cylinder and spindle.             dead bolt, cylinders and spindle.            dead bolt and spindle.                      -Full dummy.
      -Single cylinder.                            -Double cylinder.                            -Patio function.                             -Shown with K-202 knob.
      -Shown with K-202 knob.                      -Shown with K-202 knob.                      -Shown with K-202 knob.
       OR                                          *Shown without key covers.                    OR
      TS-951ML                                      Must be specified NKC.                      TS-951ML-PF
      -Trim set only. No lock.                      OR                                          -Trim set only. No lock.
                                                   TS-951ML-DC
                                                   -Trim set only. No lock.


Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
      CS-951PLD                  Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                 2" x 10" exterior plate #EP-951KC.
                                 2" x 10" interior plate #EP-951TPC.
      CS-951PLD-DC               Double cylinder. 1 3/4" minimum door thickness.
      CS-951PLD-PF               Patio function.
      TS-951PLD-FD               Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      All functions available without key cover. Please add NKC to part number.
      *Will not cover 2 1/8" bore.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

      TS-951PLD                  Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                 2" x 10" exterior plate #EP-951KC.
                                 2" x 10" interior plate #EP-951TPC.
      TS-951PLD-DC               Double cylinder. 1 3/4" minimum door thickness.
      TS-951PLD-PF               Patio function.
      TS-951PLD-FD               Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      All functions available without key cover. Please add NKC to part number.
      *Will not cover 2 1/8" bore.
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                       5-17
          Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                 952 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.
            2 1/2"     2 1/2"                           2 1/2"      2 1/2"                         2 1/2"    2 1/2"                          2 1/2"     2 1/2"
     10"




                                                  10"




                                                                                             10"




                                                                                                                                       10"
           CS-952PLD                                    CS-952PLD-NKC-DC                           CS-952PLD-PF                              TS-952PLD-FD
           -Complete set with passage latch,            -Complete set with passage latch,          -Complete set with passage latch,         -Trim set only.
            dead bolt, cylinder and spindle.             dead bolt, cylinders and spindle.          dead bolt and spindle.                   -Full dummy.
           -Single cylinder.                            -Double cylinder.                          -Patio function.                          -Shown with L-111 lever.
           -Shown with L-111 lever.                     -Shown with L-111 lever.                   -Shown with L-111 lever.
            OR                                          *Shown without key covers.                  OR
           TS-952ML                                      Must be specified NKC.                    TS-952ML-PF
           -Trim set only. No lock.                      OR                                        -Trim set only. No lock.
                                                        TS-952ML-DC
                                                        -Trim set only. No lock.


Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-952PLD                      Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 10" exterior plate #EP-952KC.
                                  2 1/2" x 10" interior plate #EP-952TPC.
   CS-952PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   CS-952PLD-PF                   Patio function.
   TS-952PLD-FD                   Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   All functions available without key cover. Please add NKC to part number.
   Note: 4 1/2" and 5 1/2" center to center available. Please specify.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-952PLD                      Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 10" exterior plate #EP-952KC.
                                  2 1/2" x 10" interior plate #EP-952TPC.
   TS-952PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   TS-952PLD-PF                   Patio function.
   TS-952PLD-FD                   Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   All functions available without key cover. Please add NKC to part number.
   Note: 4 1/2" and 5 1/2" center to center available. Please specify.
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                        5-18
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                      953 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.

         2 1/2"       2 1/2"                               2 1/2"       2 1/2"                          2 1/2"      2 1/2"                          2 1/2"      2 1/2"




                                                                                                                                           8 3/4"
8 3/4"




                                                8 3/4"




                                                                                              8 3/4"
         CS-953PLD                                       CS-953PLD-NKC-DC                              CS-953PLD-PF                                 TS-953PLD-FD
         -Complete set with passage latch,               -Complete set with passage latch,             -Complete set with passage latch,            -Trim set only.
          dead bolt, cylinder and spindle.                dead bolt, cylinders and spindle.             dead bolt and spindle.                      -Full dummy.
         -Single cylinder.                               -Double cylinder.                             -Patio function.                             -Shown with K-206 knob.
         -Shown with K-206 knob.                         -Shown with K-206 knob.                       -Shown with K-206 knob.
          OR                                             *Shown without key covers.                     OR
         TS-953ML                                         Must be specified NKC.                       TS-953ML-PF
         -Trim set only. No lock.                         OR                                           -Trim set only. No lock.
                                                         TS-953ML-DC
                                                         -Trim set only. No lock.



Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
     CS-953PLD                     Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   2 1/2" x 8 3/4" exterior plate #EP-953KC.
                                   2 1/2" x 8 3/4" interior plate #EP-953TPC.
     CS-953PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.

     CS-953PLD-PF                  Patio function.

     TS-953PLD-FD                  Full dummy. No key cover or turn piece.
     2 3/8" or 2 3/4" backset standard.
     1 3/8" minimum door thickness.
     Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
     Always specify lever/knob design.
     All functions available without key cover. Please add NKC to part number.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

     TS-953PLD                     Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   2 1/2" x 8 3/4" exterior plate #EP-953KC.
                                   2 1/2" x 8 3/4" interior plate #EP-953TPC.
     TS-953PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
     TS-953PLD-PF                  Patio function.
     TS-953PLD-FD                  Full dummy. No key cover or turn piece.
     Specify manufacturer and function of latch and lock to be used.
     Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
     Always specify lever/knob design.
     All functions available without key cover. Please add NKC to part number.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                              5-19
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                1245 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

            2 1/2"      2 1/2"                            2 1/2"      2 1/2"                                 2 1/2"     2 1/2"                             2 1/2"     2 1/2"




                                                                                                                                                 15 1/2"
  15 1/2"




                                               15 1/2"




                                                                                                  15 1/2"
   CS-1245PLD                                            CS-1245PLD-DC                                      CS-1245PLD-PF                                  TS-1245PLD-FD
   -Complete set with passage latch,                     -Complete set with passage latch,                  -Complete set with passage latch,              -Trim set only.
    dead bolt, cylinder and spindle.                      dead bolt, cylinders and spindle.                  dead bolt and spindle.                        -Full dummy.
   -Single cylinder.                                     -Double cylinder.                                  -Patio function.                               -Shown with L-114 lever.
   -Shown with L-114 lever.                              -Shown with L-114 lever.                           -Shown with L-114 lever.
    OR                                                    OR                                                 OR
   TS-1245PLD                                            TS-1245PLD-DC                                      TS-1245PLD-PF
   -Trim set only. No latch or dead bolt.                -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.


Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-1245PLD                     Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 15 1/2" exterior plate #EP-1245KC.
                                  2 1/2" x 15 1/2" interior plate #EP-1245TPC.
   CS-1245PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   CS-1245PLD-PF                  Patio function.
   TS-1245PLD-FD                  Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.
   Note: 4 1/2", 5", 5 1/2" center to center available. Please specify.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-1245PLD                     Single cylinder. Lever/knob x lever/knob. (4 1/2" center to center spacing).
                                  2 1/2" x 15 1/2" exterior plate #EP-1245KC.
                                  2 1/2" x 15 1/2" interior plate #EP-1245TPC.
   TS-1245PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
   TS-1245PLD-PF                  Patio function.
   TS-1245PLD-FD                  Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/zknob design.
   Note: 4 1/2", 5", 5 1/2" center to center available. Please specify.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                      5-20
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                                   1250 LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
             3"         3"                               3"         3"                                      3"         3"                               3"        3"




                                                                                                                                             21 1/2"
21 1/2"




                                             21 1/2"




                                                                                                21 1/2"
          CS-1250PLD                                   CS-1250PLD-DC                                      CS-1250PLD-PF                                TS-1250PLD-FD
          -Complete set with passage latch,            -Complete set with passage latch,                  -Complete set with passage latch,            -Trim set only.
           dead bolt, cylinder and spindle.             dead bolt, cylinders and spindle.                  dead bolt and spindle.                      -Full dummy.
          -Single cylinder.                            -Double cylinder.                                  -Patio function.                             -Shown with K-209 knob.
          -Shown with K-209 knob.                      -Shown with K-209 knob.                            -Shown with K-209 knob.
           OR                                           OR                                                 OR
          TS-1250PLD                                   TS-1250PLD-DC                                      TS-1250PLD-PF
          -Trim set only. No latch or dead bolt.       -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.

Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
      CS-1250PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                     3" x 21 1/2" exterior plate #EP-1250KC.
                                     3" x 21 1/2" interior plate #EP-1250TPC.
      CS-1250PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
      CS-1250PLD-PF                  Patio function.
      TS-1250PLD-FD                  Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      Note: 5 1/2" center to center available. Please specify.

Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

      TS-1250PLD                     Single cylinder. Lever/knob x lever/knob. (6" center to center spacing).
                                     3" x 21 1/2" exterior plate #EP-1250KC.
                                     3" x 21 1/2" interior plate #EP-1250TPC.
      TS-1250PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
      TS-1250PLD-PF                  Patio function.
      TS-1250PLD-FD                  Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      Note: 5 1/2" center to center available. Please specify.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                 5-21
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                  421 RIDGE LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.

          2 1/2"       2 1/2"                               2 1/2"       2 1/2"                               2 1/2"       2 1/2"                              2 1/2"      2 1/2"




                                                                                                    8 3/4"




                                                                                                                                                      8 3/4"
8 3/4"




                                                  8 3/4"




         CS-421PLD                                         CS-421PLD-DC                                      CS-421PLD-PF                                      TS-421PLD-FD
         -Complete set with passage latch,                 -Complete set with passage latch,                 -Complete set with passage latch,                 -Trim set only.
          dead bolt, cylinder and spindle.                  dead bolt, cylinders and spindle.                 dead bolt and spindle.                           -Full dummy.
         -Single cylinder.                                 -Double cylinder.                                 -Patio function.                                  -Shown with K-215 knob.
         -Shown with K-215 knob.                           -Shown with K-215 knob.                           -Shown with K-215 knob.
         -Shown with TPC-306 turn piece.                    OR                                               -Shown with TPC-306 turn piece.
          OR                                               TS-421PLD-DC                                       OR
         TS-421PLD                                         -Trim set only. No latch or dead bolt.            TS-421PLD-PF
         -Trim set only. No latch or dead bolt.                                                              -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
         CS-421PLD                    Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                      2 1/2" x 8 3/4" exterior plate #EP-421KC.
                                      2 1/2" x 8 3/4" interior plate #EP-421TPC.
         CS-421PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
         CS-421PLD-PF                 Patio function.
         TS-421PLD-FD                 Full dummy. No key cover or turn piece.
         2 3/8" or 2 3/4" backset standard.
         1 3/8" minimum door thickness.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
         TS-421PLD                   Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 8 3/4" exterior plate #EP-421KC.
                                     2 1/2" x 8 3/4" interior plate #EP-421TPC.
         TS-421PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
         TS-421PLD-PF                Patio function.
         TS-421PLD-FD                Full dummy. No key cover or turn piece.
         Specify manufacturer and function of latch and lock to be used.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                         5-22
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                422 RIDGE LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.

          3"           3"                                3"           3"                                 3"           3"                               3"         3"
10"




                                                10"




                                                                                               10"




                                                                                                                                              10"
       CS-422PLD                                      CS-422PLD-DC                                   CS-422PLD-PF                                   TS-422PLD-FD
       -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
        dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
       -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with K-214 knob.
       -Shown with K-214 knob.                        -Shown with K-214 knob.                        -Shown with K-214 knob.
       -Shown with TPC-306 turn piece.                 OR                                            -Shown with TPC-306 turn piece.
        OR                                            TS-422PLD-DC                                    OR
       TS-422PLD                                      -Trim set only. No latch or dead bolt.         TS-422PLD-PF
       -Trim set only. No latch or dead bolt.                                                        -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
      CS-422PLD                    Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   3" x 10" exterior plate #EP-422KC.
                                   3" x 10" interior plate #EP-422TPC.
      CS-422PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
      CS-422PLD-PF                 Patio function.
      TS-422PLD-FD                 Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
      TS-422PLD                    Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                   3" x 10" exterior plate #EP-422KC.
                                   3" x 10" interior plate #EP-422TPC.
      TS-422PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
      TS-422PLD-PF                 Patio function.
      TS-422PLD-FD                 Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                              5-23
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                               423 RIDGE LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.

             2 1/2"     2 1/2"                              2 1/2"      2 1/2"                             2 1/2"      2 1/2"                             2 1/2"     2 1/2"




                                                                                                                                                   12”
                                                                                                    12”
                                                     12”
      12”




            CS-423PLD                                      CS-423PLD-DC                                   CS-423PLD-PF                                   TS-423PLD-FD
            -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
             dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
            -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with L-148 lever.
            -Shown with L-148 lever.                       -Shown with L-148 lever.                       -Shown with L-148 lever.
            -Shown with TPC-306 turn piece                  -Shown with KC-300 key cover.                 -Shown with TPC-306 turn piece
             & KC-300 key cover.                            OR                                             & KC-300 key cover..
             OR                                            TS-423PLD-DC                                    OR
            TS-423PLD                                      -Trim set only. No latch or dead bolt.         TS-423PLD-PF
            -Trim set only. No latch or dead bolt.                                                        -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-423PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                  2 1/2" x 12" exterior plate #EP-423KC.
                                  2 1/2" x 12" interior plate #EP-423TPC.
   CS-423PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   CS-423PLD-PF                   Patio function.
   TS-423PLD-FD                   Full dummy. No key cover or turn piece.
  2 3/8" or 2 3/4" backset standard.
  1 3/8" minimum door thickness.
  Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
  Always specify lever/knob design.




Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
   TS-423PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                  2 1/2" x 12" exterior plate #EP-423KC.
                                  2 1/2" x 12" interior plate #EP-423TPC.
   TS-423PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   TS-423PLD-PF                   Patio function.
   TS-423PLD-FD                   Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                    5-24
        Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
431 BANDED CORRUGATED LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

       3 1/2"         3 1/2"                          3 1/2"         3 1/2"                          3 1/2"        3 1/2"                          3 1/2"       3 1/2"
10"




                                               10"




                                                                                              10"




                                                                                                                                             10"
      CS-431PLD                                      CS-431PLD-DC                                   CS-431PLD-PF                                   TS-431PLD-FD
      -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
       dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
      -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with K-201 knob.
      -Shown with K-201 knob.                        -Shown with K-201 knob.                        -Shown with K-201 knob.
       OR                                             OR                                             OR
      TS-431PLD                                      TS-431PLD-DC                                   TS-431PLD-PF
      -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
      CS-431PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     3 1/2" x 10" exterior plate #EP-431KC.
                                     3 1/2" x 10" interior plate #EP-431KC.
      CS-431PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
      CS-431PLD-PF                   Patio function.
      TS-431PLD-FD                   Full dummy. No key cover or turn piece.

      2 1/2" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.


Trim sets for tuular passage latch, dead bolt with spindle, no latch, dead bolt or cylinder(s) included.
      TS-431PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     3 1/2" x 10" exterior plate #EP-431KC.
                                     3 1/2" x 10" interior plate #EP-431TPC.
      TS-431PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
      TS-431PLD-PF                   Patio function.
      TS-431PLD-FD                   Full dummy. No key cover or turn piece.

      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                             5-25
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                      441 HAMPTON LEVER/KNOB DEAD BOLT ENTRY SETS
 Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
 Additional functions available.

            3 1/4"        3 1/4"                               3 1/4"         3 1/4"                              3 1/4"        3 1/4"                              3 1/4"       3 1/4"




                                                                                                      11 1/2"




                                                                                                                                                         11 1/2"
11 1/2"




                                                   11 1/2"




          CS-441PLD                                          CS-441PLD-DC                                       CS-441PLD-PF                                       TS-441PLD-FD
          -Complete set with passage latch,                  -Complete set with passage latch,                  -Complete set with passage latch,                  -Trim set only.
           dead bolt, cylinder and spindle.                   dead bolt, cylinders and spindle.                  dead bolt and spindle.                            -Full dummy.
          -Single cylinder.                                  -Double cylinder.                                  -Patio function.                                   -Shown with K-226 knob.
          -Shown with K-226 knob.                            -Shown with K-226 knob.                            -Shown with K-226 knob.
           OR                                                 OR                                                 OR
          TS-441PLD                                          TS-441PLD-DC                                       TS-441PLD-PF
          -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.




 Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.

          CS-441PLD                   Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                      3 1/4" x 11 1/2" exterior plate #EP-441KC.
                                      3 1/4" x 11 1/2" interior plate #EP-441TPC.
          CS-441PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
          CS-441PLD-PF                Patio function.
          TS-441PLD-FD                Full dummy. No key cover or turn piece.
          2 3/8" or 2 3/4" backset standard.
          1 3/8" minimum door thickness.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.



 Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
          TS-441PLD                   Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                      3 1/4" x 11 1/2" exterior plate #EP-441KC.
                                      3 1/4" x 11 1/2" interior plate #EP-441TPC.
          TS-441PLD-DC                Double cylinder. 1 3/4" minimum door thickness.
          TS-441PLD-PF                Patio function.
          TS-441PLD-FD                Full dummy. No key cover or turn piece.
          Specify manufacturer and function of latch and lock to be used.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                             5-26
              Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                                   451 TRELLIS LEVER/KNOB DEAD BOLT ENTRY SETS
 Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
 Additional functions available.

            3 1/2"        3 1/2"                               3 1/2"        3 1/2"                               3 1/2"        3 1/2"                              3 1/2"      3 1/2"




                                                                                                      10 1/2"




                                                                                                                                                         10 1/2"
10 1/2"




                                                   10 1/2"




          CS-451PLD                                          CS-451PLD-DC                                       CS-451PLD-PF                                       TS-451PLD-FD
          -Complete set with passage latch,                  -Complete set with passage latch,                  -Complete set with passage latch,                  -Trim set only.
           dead bolt, cylinder and spindle.                   dead bolt, cylinders and spindle.                  dead bolt and spindle.                            -Full dummy.
          -Single cylinder.                                  -Double cylinder.                                  -Patio function.                                   -Shown with K-225 knob.
          -Shown with K-225 knob.                            -Shown with K-225 knob.                            -Shown with K-225 knob.
           OR                                                 OR                                                 OR
          TS-451PLD                                          TS-451PLD-DC                                       TS-451PLD-PF
          -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.             -Trim set only. No latch or dead bolt.




 Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
          CS-451PLD                     Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                        3 1/2" x 10 1/2" exterior plate #EP-451KC.
                                        3 1/2" x 10 1/2" interior plate #EP-451TPC.
          CS-451PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
          CS-451PLD-PF                  Patio function.
          TS-451PLD-FD                  Full dummy. No key cover or turn piece.
          2 3/8" or 2 3/4" backset standard.
          1 3/8" minimum door thickness.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.



 Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.
          TS-451PLD                    Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                       3 1/2" x 10 1/2" exterior plate #EP-451KC.
                                       3 1/2" x 10 1/2" interior plate #EP-451TPC.
          TS-451PLD-DC                 Double cylinder. 1 3/4" minimum door thickness.
          TS-451PLD-PF                 Patio function.
          TS-451PLD-FD                 Full dummy. No key cover or turn piece.
          Specify manufacturer and function of latch and lock to be used.
          Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
          Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                             5-27
               Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                              461 DECO LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.

             3"          3"                                 3"          3"                                 3"          3"                                 3"         3"




                                                                                                  12"




                                                                                                                                                 12"
    12"




                                                   12"



          CS-461PLD                                      CS-461PLD-DC                                   CS-461PLD-PF                                   TS-461PLD-FD
          -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
           dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
          -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with L-142 lever.
          -Shown with L-142 lever.                       -Shown with L-142 lever.                       -Shown with L-142 lever.
           OR                                             OR                                             OR
          TS-461PLD                                      TS-461PLD-DC                                   TS-461PLD-PF
          -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
   CS-461PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                  3" x 12" exterior plate #EP-461KC.
                                  3" x 12" interior plate #EP-461TPC.
   CS-461PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.
   CS-461PLD-PF                   Patio function.
   TS-461PLD-FD                   Full dummy. No key cover or turn piece.
   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

   TS-461PLD                      Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                  3" x 12" exterior plate #EP-461KC.
                                  3" x 12" interior plate #EP-461TPC.
   TS-461PLD-DC                   Double cylinder. 1 3/4" minimum door thickness.

   TS-461PLD-PF                   Patio function.
   TS-461PLD-FD                   Full dummy. No key cover or turn piece.
   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.



PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                  5-28
          Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                     1410 CORRUGATED LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

           2 1/2"     2 1/2"                             2 1/2"      2 1/2"                             2 1/2"      2 1/2"                             2 1/2"     2 1/2"




                                                                                                  10"




                                                                                                                                                 10"
    10"




                                                   10"

          CS-1410PLD                                     CS-1410PLD-DC                                  CS-1410PLD-PF                                  TS-1410PLD-FD
          -Complete set with passage latch,              -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
           dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
          -Single cylinder.                              -Double cylinder.                              -Patio function.                               -Shown with L-106 lever.
          -Shown with L-106 lever.                       -Shown with L-106 lever.                       -Shown with L-106 lever.
           OR                                             OR                                             OR
          TS-1410PLD                                     TS-1410PLD-DC                                  TS-1410PLD-PF
          -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.



Complete sets with tubular passage latch, dead bolt, cylinder(s), spindle.
   CS-1410PLD                       Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 10" exterior plate #EP-1410KC.
                                    2 1/2" x 10" interior plate #EP-1410TPC.
   CS-1410PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.
   CS-1410PLD-PF                    Patio function.
   TS-1410PLD-FD                    Full dummy. No key cover or turn piece.

   2 3/8" or 2 3/4" backset standard.
   1 3/8" minimum door thickness.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch or cylinder(s) included.
   TS-1410PLD                       Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 10" exterior plate #EP-1410KC.
                                    2 1/2" x 10" interior plate #EP-1410TPC.
   TS-1410PLD-DC                    Double cylinder. 1 3/4" minimum door thickness.
   TS-1410PLD-PF                    Patio function.
   TS-1410PLD-FD                    Full dummy. No key cover or turn piece.

   Specify manufacturer and function of latch and lock to be used.
   Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
   Always specify lever/knob design.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                                  5-29
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                                1510 BANDBOX LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

       2 1/2"      2 1/2"                              2 1/2"     2 1/2"                              2 1/2"     2 1/2"                             2 1/2"    2 1/2"
10"




                                                10"




                                                                                               10"




                                                                                                                                              10"
      CS-1510PLD                                      CS-1510PLD-DC                                  CS-1510PLD-PF                                  TS-1510PLD-FD
      -Complete set with passage latch,               -Complete set with passage latch,              -Complete set with passage latch,              -Trim set only.
       dead bolt, cylinder and spindle.                dead bolt, cylinders and spindle.              dead bolt and spindle.                        -Full dummy.
      -Single cylinder.                               -Double cylinder.                              -Patio function.                               -Shown with K-206 knob.
      -Shown with K-206 knob.                         -Shown with K-206 knob.                        -Shown with K-206 knob.
       OR                                              OR                                             OR
      TS-1510PLD                                      TS-1510PLD-DC                                  TS-1510PLD-PF
      -Trim set only. No latch or dead bolt.          -Trim set only. No latch or dead bolt.         -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s), spindle.
      CS-1510PLD                     Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 10" exterior plate #EP-1510KC.
                                     2 1/2" x 10" interior plate #EP-1510TPC.
      CS-1510PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
      CS-1510PLD-PF                  Patio function.
      TS-1510PLD-FD                  Full dummy. No key cover or turn piece.

      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.


Trim sets for tubular passage latch, dead bolt, with spindle, no latch or cylinder(s) included.
      TS-1510PLD                     Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                     2 1/2" x 10" exterior plate #EP-1510KC.
                                     2 1/2" x 10" interior plate #EP-1510TPC.
      TS-1510PLD-DC                  Double cylinder. 1 3/4" minimum door thickness.
      TS-1510PLD-PF                  Patio function.
      TS-1510PLD-FD                  Full dummy. No key cover or turn piece.

      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                              5-30
            Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
           HP1510 HAND PEENED LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.

       2 1/2"     2 1/2"                            2 1/2"     2 1/2"                              2 1/2"     2 1/2"                             2 1/2"    2 1/2"
10"




                                                                                            10"




                                                                                                                                           10"
      CS-HP1510PLD                                CS-HP1510PLD-DC                                 CS-HP1510PLD-PF                                TS-HP1510PLD-FD
      -Complete set with passage latch,           -Complete set with passage latch,               -Complete set with passage latch,              -Trim set only.
       dead bolt, cylinder and spindle.            dead bolt, cylinders and spindle.               dead bolt and spindle.                        -Full dummy.
      -Single cylinder.                           -Double cylinder.                               -Patio function.                               -Shown with K-HP214
      -Shown with K-HP214 knob.                   -Shown with K-HP214 knob.                       -Shown with K-HP214 knob.                       knob.
       OR                                          OR                                              OR
      TS-HP1510PLD                                TS-HP1510PLD-DC                                 TS-HP1510PLD-PF
      -Trim set only. No latch or dead bolt.      -Trim set only. No latch or dead bolt.          -Trim set only. No latch or dead bolt.




Complete sets with tubular passage latch, dead bolt, cylinder(s), spindle.
      CS-HP1510PLD                  Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 10" exterior plate #EP-HP1510KC.
                                    2 1/2" x 10" interior plate #EP-HP1510TPC.
      CS-HP1510PLD-DC Double cylinder. 1 3/4" minimum door thickness.
      CS-HP1510PLD-PF               Patio function.
      TS-HP1510PLD-FD               Full dummy. No key cover or turn piece.
      2 3/8" or 2 3/4" backset standard.
      1 3/8" minimum door thickness.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      **Upcharge: A separate charge for hand peened knob or lever applies.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch or cylinder(s) included.
      TS-HP1510PLD                  Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 10" exterior plate #EP-HP1510KC.
                                    2 1/2" x 10" interior plate #EP-HP1510TPC.
      TS-HP1510PLD-DC Double cylinder. 1 3/4" minimum door thickness.
      TS-HP1510PLD-PF               Patio function.
      TS-HP1510PLD-FD               Full dummy. No key cover or turn piece.
      Specify manufacturer and function of latch and lock to be used.
      Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
      Always specify lever/knob design.
      **Upcharge: A separate charge for hand peened knob or lever applies.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                       5-31
           Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m
                             1908 CORDUROY LEVER/KNOB DEAD BOLT ENTRY SETS
Illustrations are for demonstration purposes only. Any lever or knob may be substituted for lever or knob shown.
Additional functions available.
          2 1/2"       2 1/2"                             2 1/2"        2 1/2"                         2 1/2"        2 1/2"                          2 1/2"      2 1/2"
8 3/4"




                                                                                                                                           8 3/4"
                                                8 3/4"




                                                                                              8 3/4"
          CS-1908PLD                                     CS-1908PLD-DC                                 CS-1908PLD-PF                                TS-1908PLD-FD
          -Complete set with passage latch,              -Complete set with passage latch,             -Complete set with passage latch,            -Trim set only.
           dead bolt, cylinder and spindle.               dead bolt, cylinders and spindle.             dead bolt and spindle.                      -Full dummy.
          -Single cylinder.                              -Double cylinder.                             -Patio function.                             -Shown with K-217 knob.
          -Shown with K-217 knob.                        -Shown with K-217 knob.                       -Shown with K-217 knob.
           OR                                             OR                                            OR
          TS-1908ML                                      TS-1908ML-DC                                  TS-1908ML-PF
          -Trim set only. No lock.                       -Trim set only. No lock.                      -Trim set only. No lock.



Complete sets with tubular passage latch, dead bolt, cylinder(s) and spindle.
         CS-1908PLD                 Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 8 3/4" exterior plate #EP-1908KC.
                                    2 1/2" x 8 3/4" interior plate #EP-1908TPC.
         CS-1908PLD-DC              Double cylinder. 1 3/4" minimum door thickness.

         CS-1908PLD-PF              Patio function.

         TS-1908PLD-FD              Full dummy. No key cover or turn piece.
         2 3/8" or 2 3/4" backset standard.
         1 3/8" minimum door thickness.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.



Trim sets for tubular passage latch, dead bolt, with spindle, no latch, dead bolt or cylinder(s) included.

         TS-1908PLD                 Single cylinder. Lever/knob x lever/knob. (3 7/16" center to center spacing).
                                    2 1/2" x 8 3/4" exterior plate #EP-1908KC.
                                    2 1/2" x 8 3/4" interior plate #EP-1908TPC.
         TS-1908PLD-DC              Double cylinder. 1 3/4" minimum door thickness.
         TS-1908PLD-PF              Patio function.
         TS-1908PLD-FD              Full dummy. No key cover or turn piece.
         Specify manufacturer and function of latch and lock to be used.
         Door handing and thickness is required for all Lever/Knob Dead Bolt Entry Sets.
         Always specify lever/knob design.




PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a
whole without the written permission of Sun Valley Bronze is prohibited.                                                      Revised 02/02/11


                                                                                                                                                                              5-32
             Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w . s u n v a l l e y b r o n z e . c o m

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:6
posted:8/22/2011
language:English
pages:32