Docstoc

ASSEMBLY INSTRUCTIONS

Document Sample
ASSEMBLY INSTRUCTIONS Powered By Docstoc
					                                                          PLEASE DO NOT RETURN UNIT TO STORE
                                                 FOR PARTS & CUSTOMER SERVICE PLEASE CALL 1-800-ELITE-48
                                                  CUSTOMER SERVICE HOURS EASTERN TIME 8:45 AM - 4:45 PM M-F
                                                Thank you for purchasing this Elite product. You will need the following tools:
                                       Phillips Head Screw Driver • Straight Blade Screw Driver • Rubber Padded Hammer or Mallet

           ASSEMBLY INSTRUCTIONS                                                                       14"
       36 / WIDE HIGH BOY, AUDIO/VIDEO COMBINATION UNIT
         1 2"                                                                                                                 36 1/2"
      DESIGNED FOR PLASMA, LCD, DLP & THIN FLAT-PANEL TV’S
          OVERALL DIMENSIONS: 37" H x 36 1/2" W x 21 3/4"D
                      EL-9973: Black Ash Melamine
                                      PARTS                                                                                                 37"
1. Glass Top Panel           7. Left Front Leg        13. Wire Management
   Surface (14" x 361/2")    8. Right Front Leg           Channel
2. Glass Shelf               9. Left Back Leg         14. Large Metal Frame
3. Glass Doors              10. Right Back Leg            for Glass Shelf
   (2 identical)            11. Left and Right        15. Small Metal Frame
4. Fixed Shelf                  Side Panels               for Glass Top
5. Bottom Panel                 (Identical)
6. Adjustable Shelf         12. Back Panel
                                                                                                                                    21 3/4"


                                                                                                      A              16       B                 16
                                  1
                                                                                Hardware
                                                                                for unit
                                                                                assembly
                                                                                                      Connecting Bolts               Camlocks


            2                                                               C                16       D                  1    E                     4
                                                                                                                                    BL
                                                       15                                                                             AC
                                                                                                                                        K
                                                                                                                               1-3/16" Bolts for
                                                                                Wooden Dowels             Hex Key Tool           Metal Frames
                                                                   13
                                                                            F                8        G              10       H                   8
                                                                                                                                      BLACK

                                                      14                                                 Self-Adhesive
  9                                                                                                   Spacer Disk for Glass
                                                                                 Plastic Glass          Top, Glass Shelf            5/8" Screws
            11                                                                     Cushion                                         for Back Panel
                                                                                                       & Wire Managment

                                                                            I                    2    J                2      K                     2
                                                                                                               OME
                                            12                                                              CHR                       BLACK
                                                            11
                                                                             11/16" Threaded
                                                                                                      11/16" Screw for            5/8" Screws for
                                                                            Bushings for Large
                                                                                                      Wire Management             Magnetic Latch
                                                                               Metal Frame
                                       4
                                                                            L               12        M 2                     N                   1

                                                                                Plastic Camlock        8              2       Double Magnetic
  7                               6                                                  Covers           Glass Door Hinges         Touch Latch

                                                                            P                4        Q                4      R                   2
                                                                  10
                        5


                                                                                Plastic Bushings                              Metal Strike Plates
                                       8                                                              Protective Plates
            3
                                                                            S                    2    T                  4
                            3

                                                                                Foam Protective           1" Long Metal
                                                                                     Pads                   Shelf Pins
                                             475772              Page 1/8                   6.26.06
                IMPORTANT NOTES & CAUTIONS/WARNINGS                                                                      SPECIAL NOTE
• Carefully read and follow these instructions for assembly.                                                             In all steps involving cam-
• Please handle parts carefully, some parts may be heavy and can have sharp edges –                                      locks, please note the cor-
  we recommend possibly using cloth protective gloves for extra protection.                                              rect position of the cam-
• To protect the unit and your flooring surface we recommend working on a padded or carpeted                             lock in the illustration at
  area, you may also use the open box the unit came in for this purpose.                                                 the left. Check all cam-
• For proper construction & integrity/assembly and for TV weight support and safety, all                                 locks before aligning and
  connections need to be sufficiently tight. However, do not over-tighten connections to the point                       joining pieces together.
  of stripping screw threadings. Parts are designed to fit together tightly, however, avoid excessive                    IMPORTANT: Throughout
  force but rather align & fit panels together methodically and with patience.                                           assembly of the unit,
• For some heavy or large units, it may be recommended for 2 people to work together on this               camlocks must be inserted with the
  assembly.                                                                                                openings facing the nearest unfinished
• Please read additional important safety information at the end of this instruction manual.               edge and screwdriver slot parallel to
• We urge you to keep this manual with your unit for future reference.                                     unfinished edge.


1   FRONT & BACK LEG PREPARATION
Screw Connecting Bolts (A) into each Leg as shown.
Note that each leg has 2 square corners and 2 rounded
corners. The rounded corners will always face out and                                          WHEN INSERTING
the square cornered edge ROUNDED                                                              CONNECTING BOLTS                      9
                             CORNERS                                                         DO NOT OVERTIGHTEN
has the holes to
receive the                          10
                         9                                                       7
Wooden Dowels
(C) and holes with                                                                          A                          A
                                                                                                                                                10
factory installed
threaded          CONNECTING  SQUARE  CONNECTING
                    BOLTS    CORNERS     BOLTS
bushings             “A”                  “A”

to insert the
Connecting                                         8
Bolts (A).
                         7             8
                                  ROUNDED
                                  CORNERS




2 FIXED SHELF PREPARATION                                                            C
Place Fixed Shelf (4) on flat padded sur-                     A
face with underside facing up. Insert 4                                                                     K
Camlocks (B) and 4 Wooden Dowels (C)                                                                                             WHEN INSERTING
as shown.                                                                                                   N                   CONNECTING BOLTS
                                                                                                                               DO NOT OVERTIGHTEN
Insert 4 Connecting Bolts (A) as shown.                                              B                                 FRO
                                                                                                                          NT
Attach Double Magnetic Latch (N) using 2                                     B                                               ED
                                                                                                                               GE
screws (K) to front edge. Be sure that                                                                                                         C
magnets face the front edge.                                                                     4
                                                                                                                                B
NOTE: Back Edge has groove for            C                                                (Underside)
attaching Back Panel (12).
Front Edge has holes for Double                                                                                       B                  A
Magnetic Latch (N) in the
center and holes for Door
Hinges (M) at the front corners.
                                                                                                            C

                                             3 BOTTOM PANEL PREPARATION
                                             FRO                                                                           A
                         B                      NT
                                                   ED
                                                     GE
                  B
                                 5                                       C
                              (Underside)               B                                                         5
C
                                                                                                                  Holes for
                                                   B                                                                Door
                                                                                                    FRO            Hinges
                                                                                                       NT
                                                                                                          ED
                                                                                                            GE

                                                     C
Place Bottom Panel (5) on flat padded               Turn Bottom Panel over.                             NOTE: Back Edge has groove for
surface with underside facing up. Insert 4          Insert 4 Connecting Bolts (A) as shown.             attaching Back Panel (12).
Camlocks (B) and 4 Wooden Dowels (C)                                                                    Front Edge has holes for Door Hinges
as shown.                                                                                               (M) at the front corners.
                             475772                                    Page 2/8                                  6.26.06
                                                             C
4   PREPARATION OF
    SIDE PANELS
                               C                                                        CAMLOCK/CONNECTING BOLT PROCEDURE


Insert Wooden
Dowels (C)                             B             B
and Camlocks
(B) into each                  B
Side Panel (11)     11                                           B
as shown.                                                                11                            JOIN PIECES
                                                                                                        TOGETHER        TURN CAMLOCKS
                                                                                     ALIGN CAMLOCK                   180° CLOCKWISE USING
                                                                                          WITH                             A FLATHEAD
                                                                                    CONNECTING BOLT                       SCREWDRIVER
                                   C                     C



5   ATTACH FIXED SHELF
    AND BOTTOM PANEL
                                                                                                             FRONT EDGE
                                                                                                        4
    TO SIDE PANELS
    Place prepared Bottom Panel (5)
    on padded surface.
    Align Wooden Dowels (C) of each
    Side Panel (11) with correspon-
    ding holes on Bottom Panel (5).                          11                                                             11
    Connecting Bolts (A) on Bottom
    Panel (5) should also be aligned
    with Camlocks of Side Panels
    (11). Join pieces together. Turn
    Camlocks on Side Panels clock-
    wise 180° to lock.                                                                         5
    Align Wooden Dowels (C) of each
    Side Panel (11) with correspon-
    ding holes on Fixed Shelf (4).                                                                          FRONT EDGE
    Connecting Bolts (A) on Fixed                                                                  4
    Shelf (4) should also be aligned
    with Camlocks of Side Panels
    (11). Join pieces together. Turn                          11
    Camlocks on Side Panels clock-                                                                                           11
    wise 180° to lock.


                                                                                               5


     ATTACH BACK LEGS MAKE SURE AS YOU ATTACH LEGS
6                     THAT TOP IS UP. ALL HOLES TO
                                                                                        Connecting Bolts on Back Legs with cor-
                                                                                        responding holes and Wooden Dowels of
                      ATTACH METAL FRAMES ARE AT                                        Fixed Shelf (4) and Bottom Panel (5).
                      TOP OF LEG.
                      Place Back Legs (9, 10) on padded sur-                            Join pieces together.
                      face with Connecting Bolts (A) facing up.                         Turn all Camlocks 180° clockwise to lock.
                      Turn unit onto back edges and align
                                       FR
            11                           ON
                                           TE
                                             DG
                                               E
                                                                                          11
                                   4
                                                                                                              4
                         5
                                           11
        9
                                                                                9
                                                                                                   5
                                                                                                                      11
REMEMBER TO
LOCK CAMLOCKS                                   10                                                                         10
AFTER JOINING ALL
LEGS TO UNIT,
2 CAMLOCKS PER LEG.

                      475772                                         Page 3/8                            6.26.06
7   INSERT ADJUSTABLE SHELF
                                                                                            A. Insert Metal
    A. Insert 4 Metal Shelf Pins (T) at desired height.
                                                                                9              Shelf Pins (T)                      10
    This may be changed after Front Legs (7 & 8) are
    attached.
    B. Insert Adjustable Shelf (6) as shown. NOTE: It is best                                                     4
    to position Adjustable Shelf (6) to allow enough space to              11                                                           11
    tighten upper camlocks of front legs. You may need a                                     T                        T
                  very short screwdriver. If you do not have a
                        screwdriver small enough, take out                                               5
                             shelf pins temporarily, so that
                                   Adjustable Shelf can be
                       6             moved up or down as
                                        needed, as you tighten                          B. Insert Adjustable
           11                           camlocks for front legs.                9          Shelf (6) (See note)                    10
                                                                                                                           4
                         4
               5                                                                                     6
9                                 11                                       11                                                           11
                                                                                                             5
                                        10


     ATTACH FRONT LEGS
8
     MAKE SURE AS YOU ATTACH                                   7
     LEGS THAT TOP IS UP. ALL
     HOLES TO ATTACH METAL
     FRAMES ARE AT
     TOP OF LEG.                                                   11
                                                                                        4
     Align Connecting Bolts
     on Front Legs (7, 8)                                                           6
     with corresponding
     holes and Wooden Dowels of                                                                                   8
     Fixed Shelf (4) and Bottom
     Panel (5). Join pieces together.
     Turn all Camlocks 180°                             9                   5
                                                                                                             11
     clockwise to lock.

                                                                                                                      10




     ATTACH LARGE METAL FRAME FOR GLASS SHELF
9                                                                                                                              Frame Bolt
     Place unit in upright position. Align threaded posts of
                                                                                                                               “E” goes all
     Large Metal Frame (14) with corresponding holes on 2                                        D                             the way
     Back Legs (9, 10). Insert threaded posts.                                                                                 through
                                                                                        E
                                                                                                                               Large Metal
                                                                                                                               Frame at
                                               Insert Threaded                                                                 corners
                                                                                                                  14
           9                             I     Bushings (I) into back of
                                               legs but do not tighten.

      14                                         Using 2 Bolts (E),
                                                 attach front of Large                  7
                                                 Metal Frame (14) to
                                                 Front Legs (7 and 8).
                                                 Tighten Bolts (E)
                                                 completely.
                                                                                                                               8
                                                Now tighten the Threaded
                                             10 Bushings (I) at the back of                              D
                                                                                             I
                                                each leg.
                                                 Tighten Threaded
                                                 Bushings (I) completely.


                        475772                                Page 4/8                                   6.26.06
10   ATTACH SMALL METAL FRAME
     FOR GLASS TOP PANEL
                                                                     11   ATTACH WIRE MANAGEMENT CHANNEL
     Using 2 Bolts (E), attach Small Metal Frame (15) to
     Back Legs (9 & 10) as shown. Tighten completely                      Attach 2 Self-adhesive Spacer Disks (G) between Wire
     using Hex Key Tool (D).                                              Management Channel (13) and Small Metal Frame (15)
                                                                          as shown. Attach Wire Management Channel (13) to
                                  D                                       Fixed Shelf (4) using a Phillips Head Screwdriver and 2
                          E             Frame Bolt
                                          “E” goes all                    Screws (J).
                                          the way
                                          through
                                          Small Metal
                   9                      Frame at
                                 15       corners                                    15                               G




                                                                            J
     7                                                   10                                         13
                        4                 14
                                                                                                                       14

                                                                                                                 4
                    5                                                                                    6

                                      8
                                                                                                             5




     ATTACH BACK PANEL
12
     Using 8 Screws (H) attach Back Panel (12) to
     groove on back edges of both Fixed Shelf (4)
     and Bottom Panel (5).




                                                                                           4

                                                                                     6




                                                                                                5
                                                                                12
                                             H




                        475772                                Page 5/8                         6.26.06
13   ADD GLASS DOORS
     Add 4 Plastic Bushings (P) to
     holes in the front of Fixed Shelf
     (4) and Bottom Panel (5) as
     shown.


     Fit top Hinge (M) over top               P
     corner of Glass Door.
     Slip protective plate (Q)
     between glass and hinge
     setting screws. Slightly tighten
     screws carefully. Insert bottom
     hinge (M) into bottom Plastic
     Bushing (P) and slip door into
     hinge, after inserting top corner.
     Slip protective plate (Q)
     between glass and hinge
     setting screws. Tighten
     screws carefully.
     NOTE: If door does not fit
     properly, loosen setting screws
     and slide door in hinge as                                          P
     necessary. Make sure setting
     screws stay in contact with
     protective plates when
     tightened. Remove paper
     backing from foam pad (S) and
     attach/wrap over top inner
     corner of door. Do not stretch.
     Slide metal Strike Plate (R)
     over pad.
     Repeat for Second Door.
                                                              M


     Use the above procedure to
     adjust doors so that they align                      Q
     evenly with each other.




                                                                   M         M




       R



           S

                Q      M

           3


                                          R

                                                  Q


                                                      M
                                          3

                        475772                                Page 6/8           6.26.06
                                                                  G
14   ADD GLASS CUSHIONS
     AND SPACER DISKS
                                       F                                                       F
     CENTER GLASS TOP
     AND GLASS SHELF



     Insert 8 Glass Cushions
     (F) into all holes of both
     Metal Frames.                                                       G
     Attach 4 self-adhesive
     Spacer Disks (G) to each
     Metal Frame as shown.
     Place unit where desired
     and carefully lay Glass
     Top (1) and Glass Shelf
     (2) on unit, centering
     them on Glass Cushions.




                                                                                       1




                       Make sure Glass
                       Top (1) and Glass
                       Shelf (2) are
                       centered on
                       Glass Cushions
                       (F) with equal
                       overhang at all                                                     2
                       four corners.




                                           L
                                                   ADD CAMLOCK COVERS
                                                     (L) TO ALL LOCKED
                                                     VISIBLE CAMLOCKS




                     475772                    Page 7/8                      6.26.06
                                                       IMPORTANT NOTICE
                                   The glass top panel surface (Part #1) is designed to be used with
                                                    TV's and other A/V equipment
                                                  NOT weighing more than 220 lbs.
                                               The loading weight needs to be evenly
                                distributed across top panel and for optimum stability, place TV in a
                                       center position on glass top, not unbalanced to the side
                                                      against edge for example.
                                   Avoid concentration of heavy weight loading, (over 110 lbs.), on a
                                            small surface area of less than 311/2" in width.
                                             Also: Note dimensions for Glass Top Panel
                                           Surface as listed at the beginning of this manual
                                                         and read the following
                                                   "Important Safety Precautions".
                                   Part #2, Glass Shelf, is designed to be used with A/V components
                                                   NOT weighing more than 110 lbs.
                                    Part #4 (Fixed Shelf) and Part #5 (Bottom Panel), are designed
                                                   to be used with A/V components
                                               NOT weighing more than 66 lbs. per shelf.
                                                Part #6 (Adjustable Shelf), is designed
                                                  to be used with A/V components
                                               NOT weighing more than 44 lbs. per shelf.
                                                 HOWEVER, for the total unit loading
                                              capacity, DO NOT exceed a total of 440 lbs.

                                          IMPORTANT SAFETY PRECAUTIONS
Please carefully read & follow these important safety information notes for proper use of the furniture you have just assembled.
They are designed to avoid unsafe conditions that can result in property damage, bodily injury or death. We therefore urge strict
adherence to the following basic principals:
• Install this unit on a flat & level surface only.
• Avoid placing unit in direct sunlight or near heating source. We recommend not placing unit directly against wall but rather leav-
  ing a narrow space between unit and wall for proper ventilation of your A/V equipment.
• Do not exceed the above recommended weight loading limits as this can result in sagging or structural failure of the supporting
  panel leading to unsafe conditions.
• TV screen sizes are measured diagonally, therefore, base foot-print size for specific TV’s can not be determined by screen size
  as they vary from manufacturer to manufacturer. Rather you will need to measure the TV’s base foot print and compare it to the
  glass top panel surface size of your furniture as listed in this manual.
• Make sure to place TV within the surface area of the top panel, a bit inward from the front edge and centered. Never use with
  a TV that is too large. The TV base foot print surface must be able to sit completely on the top panel surface.
• When choosing locations for stacking A/V components on shelves, make sure to place the heaviest A/V equipment on the low-
  est possible shelves/bottom panels first.
• Children should never be allowed to climb on or play with this furniture or/and the TV. This can result in an unsafe situa-
  tion which may lead to the TV and/or the furniture itself to become unsteady, slip, tip or fall over. Avoid using higher shelves or
  the top surface of the TV for objects that may tempt children to reach and climb. Such items can include toys, food, as well as
  remote controls, etc. Proper supervision and common sense is always required.
• Glass surfaces and doors are “Tempered.” This is a special process for achieving strength and safety. Although durable & solid
  we recommend avoiding bumping into glass with force or dropping or chipping edges etc. Special caution should be given to
  glass corners, both, for protection of glass as well as most importantly to avoid the possibility of injuries resulting from strong
  impacts against corners especially with children. Doors should be opened & closed gently. (Tempered glass is designed to
  shatter upon very strong impact and rather than producing sharp knife-like dangerous edges, it turns instead into small pebble-
  like pieces.)
• Moving the unit: Do not drag unit when moving, especially not on a carpeted surface or on a rug. It is always recommended
  instead to lift unit from both ends with a friend’s help. For the sake of safety and to avoid damages, we recommend you
  remove the TV and all A/V components prior to moving this stand. It is a good idea to remove the glass panel surfaces as well.
  If this is not possible please use much caution and good judgment and seek help to ensure stability and safety as the stand is
  being moved. Make sure afterwards to properly re-adjust glass top and all equipment, centered and stable as originally
  instructed above.

                                               Congratulations and enjoy your new ELITE product!
           To clean your unit, apply window cleaner with soft tissue. This will also eliminate slight surface abrasions or scratches
                                                 that may have occurred in shipping or handling.
               Distributed by: Elite Industries, 77 Gould Street • Bayonne, NJ 07002, Tel.: 201-436-1120 • Fax: 201-436-6960
Elite Industries ensures complete satisfaction with this product. In the event of missing or damaged parts call toll free, Customer service
                                           hours: 8:45-4:45, Monday-Friday, EST., 1-800 ELITE-48

                          475772                                 Page 8/8                              6.26.06

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:15
posted:8/17/2011
language:English
pages:8