IC Products Group
WiMAX MMICs
Agenda
• Amplifiers
– – – –
Low noise amplifiers Driver amplifiers Power amplifiers Variable gain amplifiers Package size reduction switches Bumped and Known Good Die Digital control
• Switches
– –
• Attenuators
–
2
Amplifier Products
Amplifier Roadmap
VVAs Variable Gain Amplifiers Higher Power Drivers Improved Driver Amps Transmitter MMICs
Digital Attenuators
High IP3 LNA’s Bypass LNA
2008
4
2009
2010
MAAL-008550/007304/07306 0.5 – 3.0GHz Low Noise Amplifiers
MAAL-007306 PHEMT, SOT-26 500-3000 MHz MAAL-007304 PHEMT, SOT-26 500-3000 MHz MAAL-008550 PHEMT, SC-70 500-3000 MHz At 2300 MHz P1dB = 3 dBm Gain = 14 dB OIP3 = +16 dBm N.F. = 0.7 dB Current = 8 mA Voltage = 3 V At 2300 MHz P1dB = 7 dBm Gain = 25 dB OIP3 = +18 dBm N.F. = 0.8 dB Current = 11 mA Voltage = 3 V At 1700 MHz P1dB = 16 dBm Gain = 28 dB OIP3 = +28 dBm N.F. = 0.8 dB Current = 90 mA Voltage = 5 V
5
MAAL-008551 0.5 – 4.0 GHz Low Noise Amplifier Family
PHEMT, 1.5x1.2mm Repackage of the 8550 500-4000 MHz At 2500 MHz P1dB = 3 dBm Gain = 14 dB OIP3 = +16 dBm N.F. = 0.7 dB Current = 8 mA Voltage = 3 V Samples Available Now
6
High IP3 Low Noise Amplifiers
• MAAL-009122
– – – – – – – –
• MAAL-009123
– – – – – – – –
pHEMT, 1.2x1.5mm 250-4000 MHz At 2200 MHz Gain = 15 dB OIP3 = +37 dBm NF = 1.2 dB Current = 70 mA Voltage = 5 V Samples target Q2’09
pHEMT, 1.2x1.5mm 250-4000 MHz At 2200 MHz Gain = 26 dB OIP3 = +37 dBm NF = 0.8 dB Current = 140 mA Voltage = 5 V Samples target Q2’09
–
–
1.2 x 1.5 PQFN
7
High Linearity Driver Amplifiers – Single Stage
MAAMSS0050
HBT, SOT-89
MAAMSS0049
HBT, SOT-89 250-4000 MHz
400-3500 MHz At 2140 MHz Gain = 13 dB OIP3 = +45 dBm ACPR = -50dBc, +20dBm P1dB = +30 dBm N.F. = 4.5 dB Current = 430 mA @20dBm Voltage = 5 V
MAAMSS0048
HBT, SOT-89 250-4000 MHz At 2140 MHz Gain = 15.5 dB OIP3 = +40 dBm ACPR = -45dBc, +18dBm P1dB = +27 dBm N.F. = 3.5 dB Current = 175 mA @18dBm Voltage = 5 V
At 2140 MHz Gain = 15.5 dB OIP3 = +43 dBm ACPR = -50dBc, +19 dBm P1dB = +28.5 dBm N.F. = 3.5 dB Current = 288 mA @20dBm Voltage = 5 V
MAAMSS0071
HBT, SOT-89 250-4000 MHz At 2140 MHz P1dB = 26 dBm Gain = 16.5 dB OIP3 = +37 dBm N.F. = 3.2 dB Current = 115 mA @15dBm Voltage = 5 V
8
Low Noise Figure Driver Amplifier
MAAMSS0070
250 to 3800 MHz
– – – – – –
3.2 dB Noise Figure + 40 dBm OIP3 12.7 dB Gain + 21 dBm P1dB Single +5 V Supply Voltage MESFET
9
High Linearity Driver Amplifiers – Dual Stage
MAAMSS0058
HBT, SOIC-8EP
MAAMSS0057 MAAMSS0073
HBT, SOIC-8EP 250-3500 MHz At 2140 MHz Gain = 21 dB HBT, 4mm PQFN 250-4000 MHz At 3500 MHz EVM = 1.5% rms @21dBm Pout Gain = 20 dB OIP3 = +43 dBm P1dB = +29 dBm N.F. = 3.8 dB Current = 590 mA @23dBm Pout Voltage = 5 V
250-3500 MHz At 2140 MHz Gain = 20 dB OIP3 = +47 dBm P1dB = +33 dBm N.F. = 4.5 dB Current = 960 mA @26dBm Voltage = 5 V
MAAMSS0056 MAAMSS0072
HBT, SOIC-8EP 250-3500 MHz At 2140 MHz Gain = 22 dB OIP3 = +42 dBm P1dB = +27.5 dBm N.F. = 3.5 dB Current = 195 mA @13dBm Voltage = 5 V HBT, 4mm PQFN 250-4000 MHz At 3500 MHz EVM = 1.5% rms @18dBm Pout Gain = 22 dB OIP3 = +39 dBm P1dB = +27 dBm N.F. = 3.7 dB Current = 235 mA @17dBm Pout Voltage = 5 V
OIP3 = +45 dBm P1dB = +31 dBm N.F. = 4.5 dB Current = 600 mA @22dBm Voltage = 5 V
10
IF Driver Amplifiers
MAAM-009116
MESFET, SOT-89 50-1000 MHz At 500 MHz
MAAM-000300
MESFET, SOT-89 50-870 MHz At 800 MHz
P1dB = 22 dBm Gain = 18 dB OIP3 = +40 dBm N.F. = 2.4 dB Current = 175 mA Voltage = 5 V Samples Available
MAAMSS0046
HBT, SOT-89 50-500 MHz At 500 MHz P1dB = 20 dBm Gain = 15-18 dB OIP3 = +38 dBm N.F. = 4.8 dB Current = 70 mA Voltage = 5 V
P1dB = 21 dBm Gain = 13 dB OIP3 = +40 dBm N.F. = 2.5 dB Current = 160 mA Voltage = 5 V Samples Available
11
IF Driver Amplifier
MAAM-000300
50 to 870 MHz
– – – – –
2.5 dB Noise Figure + 40 dBm OIP3 13 dB Gain + 21 dBm P1dB Single +5 V Supply Voltage
12
IF Driver Amplifier
MAAM-009116
50 to 1000 MHz
– – – – –
2.4 dB Noise Figure + 40 dBm OIP3 18 dB Gain + 22 dBm P1dB Single +5 V Supply Voltage
13
MAAPSS0103 2.3 – 2.7 GHz WiMAX Linear Power Amplifier
• Linear
– – –
Pout: 26dBm
VCC1
GND
EVM=2.4% OFDM, QAM-64, 54Mbps P1dB=33dBm
V CS
GND
VCC2
GND
RFOUT/VCC3
• Gain:
>30dB Voltage: 5V
RFOUT/VCC3
• Operating • Low
– –
Quiescent/Operating Current:
RFIN
RFOUT/VCC3
DETIN
200mA, no RF 450mA, with RF
GND
• Gain
–
Flatness: +/- 0.5dB 4 mm 16-lead PQFN Package
VEN1
VEN2
VEN3
DETOUT
200 MHz Bandwidth operation
• Lead-Free • Includes • Linear
Power Detector
Power: 22 dBm @ 3.3 Volts
14
MAAPSS0104 3.3 – 3.8 GHz WiMAX Linear Power Amplifier
• Linear
– – –
Pout: 26dBm
V CS
GND
VCC1
GND
VCC2
GND
EVM=2.4% OFDM, QAM-64, 54Mbps P1dB=33dBm
RFOUT/VCC3
• Gain:
30dB Voltage: 5V
RFOUT/VCC3
• Operating • Low
– –
RFIN
RFOUT/VCC3
DETIN
Quiescent/Operating Current:
GND
200mA, no RF 450mA, with RF
• Gain
–
Flatness: +/- 0.5dB 4 mm 16-lead PQFN Package
VEN1
VEN2
VEN3
DETOUT
200 MHz Bandwidth operation
• Lead-Free • Includes • Linear
Power Detector
Power: 22 dBm @ 3.3 Volts
15
High Power Amplifiers – 10W P1dB
• MAAP-009654
– – – – – – –
• MAAP-009655
– – – – – – –
Target CPE or BTS Equipment 100 to 2800MHz operating band 200MHz tunable bandwidth 13dB gain at 2GHz 1% EVM at +30dBm Pout 50dBc ACPR 8V control Usable from 5V to 10V 800mA current Samples target Q3’09
Target CPE or BTS Equipment 2 to 6GHz operating band 200MHz tunable bandwidth 20dB gain at 2GHz 1% EVM at +30dBm Pout 50dBc ACPR 8V control Usable from 5V to 10V 900mA current Samples target Q3’09
–
–
–
–
16
High Linearity Amplifiers
• MAAP-009656
– – – – – –
• MAAP-009657
– – – – – –
Target CPE equipment 2300 to 3800MHz operating band 200MHz tunable bandwidth 35dB gain at 2.6GHz 2.5% EVM at +32dBm Pout 5V control Usable from 3V to 6V 1200mA current at 30dBm On chip 20dB attenuator Output detector ESD > 1kV Samples target Q3’09
Target mobile applications 2300 to 3800MHz operating band 200MHz tunable bandwidth 30dB gain at 2.6GHz 2.5% EVM at +26dBm Pout 3V control Usable from 2.5V to 4V 400mA current at 24dBm On chip 20dB attenuator Output detector ESD > 1kV Samples target Q3’09
– – – –
– – – –
–
–
17
3.5GHz Variable Gain Amplifier
MAAM-009325
3.3 to 3.8 GHz
• • • • • • • •
25 20 15
Gain
–
25 dB
At min attenuation setting
10 5 0 Gain (dB) -5 -10 -15 -20 -25 -30 -35 -40 -45 3 3.1 3.2 3.3 3.4 3.5 Freq uency(G Hz) 3.6 3.7 3.8 3.9 4 R eference Loss 0.5 dBA ttenuation 5dBAttenuation 20dBAttenuation 38dBAttenuation 58dBAttenuation 60dBAttenuation
Attenuation Range 60 dB Output P1dB 25 dBm Output IP3 41 dBm Noise Figure 5 dB Current 350 mA 0-3V analog control 4mm PQFN Package
18
Variable Gain Amplifier Summary
Part Number MAAM-009320 MAAM-009321 MAAM-009325 MAAM-009326 MAAM-009327 MAAM-009329
Frequency (MHz) 700 - 1000 1700 - 2700 3300 - 3800 700 - 1000 1700 - 2700 3300 - 3800
Control Analog Analog Analog Serial Serial Serial
Gain (dB) 25 25 25 25 25 25
Range (dB) 60 60 30 30 30 30
IP3 (dBm) 41 41 41 41 41 41
19
M/A-COM’s Switches
SPDT High Isolation Terminated Switch
MASW-008543
0.05 to 4.0 GHz
• • • Positive Voltage Control: High Isolation: 62 dB @ 1 GHz 65 dB @ 2 GHz Single Control version in development • MASWSS0198
21
New Small Outline Switches
• NEW
–
Small Outline Packaged Switch Products
SPDT & SP3T in a variety of package types Excellent choices for Small Form Factor designs
–
Applications Include:
WLAN 802.11 a/b/g MIMO 802.11n 2.5 GHz WiBro 802.16d 2.3GHz WiMAX 802.16e for 2.5, 3.5 and 5.8 GHz Cellular handset applications
22
SPDT, 0.25W, 1.8 Volt
MASW-009444
0.5 to 6.0GHz
• • • • Low Voltage Operation: 1.8V 0.5 micron GaAs PHEMT 1.0 x 1.0 x 0.5mm Package Low power low cost switching applications
RFC-RF1 Insertion Loss 0 -0.2 Insertion Loss (dB) -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 0 1 2 3 Frequency (GHz) 4 5 6
1.0 x 1.0 PDFN
RFC-RF1 Isolation
0 -5 -10 Isolation (dB) -15 -20 -25 -30 -35 -40 0 1 2 3 Frequency (GHz) 4 5 6
23
SPDT, 0.25 W, 1.3 Volt
MASW-009588
0.5 to 6.0GHz
• • • • Low Voltage Operation: 1.3V 0.5 micron GaAs PHEMT 1.0 x 1.0 x 0.5mm Package Low power low cost switching applications
RFC-RF1 Insertion Loss 0 -0.2 Insertion Loss (dB) -0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 0 1 2 3 Frequency (GHz) 4 5 6
Functional Schematic V1 GND 1.0 x 1.0 PDFN V2
RFC-RF1 Isolation
0 -5 -10 Isolation (dB) -15 -20 -25 -30 -35 -40 0 1 2 3 Frequency (GHz) 4 5 6
24
SPDT, 1W, 1.8V
MASW-009589
0.5 to 6.0GHz
• • • • Low Voltage Operation: 1.8V 0.5 micron GaAs PHEMT 1.0 x 1.0 x 0.5mm Package Medium power switching applications
GND 1.0 x 1.0 PDFN V2 Functional Schematic V1
RFC-RF1 Insertion Loss
-0.2 -0.4 -0.6
RFC-RF1 Isolation
0 -5 -10 -15
IL1
IL2
0 1 2 3 4 5 6
-20 -25 -30 -35
-0.8 -1.0 -1.2
-40 0 1 2 3 4 5 6
freq, GHz
freq, GHz
25
SPDT, 0.5W, 2.5 Volt
MASWSS0167
0.5 to 3.0GHz
• • • • Low Voltage Operation: 2.5V 0.5 micron GaAs PHEMT 1.2 x 1.5 PQFN Small 1.5 x 1.2 x 0.75 mm Package >30dB Isolation for 802.11b,g Applications
26
SPDT, Broadband
MASW-007107
DC to 8.0GHz
• • • • • Insertion Loss: 0.5dB from 2-8 GHz 2 mm 8-Lead PDFN Isolation >30 dB from 2-8 GHz Fast Settling for Low Gate Lag Requirements Ideal for 802.11 a/b/g/n and MIMO Applications Test & Measurement, Telecommunications
27
SP3T, 4W, Symmetrical
MASW-009359 / MASW-009482
DC to 4.0GHz SP3T
• • • • • Insertion Loss < 0.5dB at 2GHz Isolation >20 dB at 2GHz P1dB >36dBm Ideally suited for cellular antenna switching Small 2 x 2 x 0.75 mm Package
28
SPDT, 10W
MASW-007921
DC to 6.0GHz
• • • • High Power: P0.1dB 40dBm 2 mm 8-Lead PDFN Insertion Loss: <1.0 dB thru 5.5 GHz Isolation >25 dB Through 6.0 GHz Fast Settling for Low Gate Lag Requirements
29
MA-COM’s New Bumped Die Products
New Bumped and Bare Die Switch Products
• NEW
–
Bumped Die Flip Chip Switch Products
SPDT and SP3T Switches For Module & Small Form Factor designs
–
Applications Include:
WLAN 802.11 a/b/g MIMO 802.11n 2.5 GHz WiBro 802.16d 2.3 GHz WiMAX 802.16e for 2.5, 3.5 and 5.8 GHz
Tape and reel option for ease of assembly
31
Bumped GaAs SP3T Switch
MASW-008902-000DIE / MASW-009276-000DIE
2.4 to 2.5GHz
• • • • Insertion Loss: 0.6dB Typical Isolation >30 dB Rx Path Flip Chip Configuration Ideal for 802.11 b/g and Bluetooth Applications
32
Bumped GaAs SP3T Switch with Integrated Bypass LNA
MAMF-009448-000DIE
2.4 to 2.5GHz
• • • • • Insertion Loss: 0.65dB Typical Isolation >30 dB Rx Path Flip Chip Configuration Ideal for 802.11 b/g and Bluetooth Applications Higher level of integration allowing module footprint reduction
33
GaAs SPDT High Power Bumped Switch Die
MASW-009620
2 to 3.0GHz
• • • • • WiMAX Application Insertion Loss: 0.5 dB typical @ 2.5 GHz Isolation: 25 dB typical Flip-chip configuration RoHS* Compliant
34
GaAs WLAN – WiMAX Dual SPDT
MASW-008206-000DIE
2.4 & 5.8GHz
• • • • Each Switch Optimized for 2.4 or 5.8 GHz Ideal for 802.11 a/b/g/e and MIMO Applications Low Insertion: 0.7dB @ 2.4 & 0.9 dB @ 5.0GHz Low Harmonics: <-63 dBc @ 20dBm
2.4GHz 5.8 GHz
35
GaAs SP3T High Power Switch Die
MASWSS0100
0.01 to 3.0GHz
• • • • Insertion Loss: 0.5dB at 1.0 GHz Low Harmonics: -70 dBc at 34dBm & 1.0 GHz P0.1dB: 38dBm Ideal for connecting multiple Tx to Antenna
36
Attenuators
Attenuator Roadmap
GaN Voltage Variable Attenuators VVAs Variable Gain Amplifiers Transmitter MMICs
Digital Attenuators Broadband Digital Attenuator
Serial/Parallel Control Digital Attenuator
2008
38
2009
2010
1-Bit, Single Control Digital Attenuator
MAADSS0012
2.0 to 8.0 GHz
• • • • 21 dB Step Attenuator Positive Control : 2.5V Typical Linearity: IIP3 = 42 dBm Typical 1.0 dB Insertion Loss @ 8 GHz
2 mm 8-Lead PDFN
39
4-Bit, Single Control Digital Attenuator
MAADSS0013
0.05 to 4.0 GHz
• • • • 15 dB Step Attenuator 1.0 dB LSB 1, 2, 4, 8 dB Steps RoHS 3mm PQFN Insertion Loss: 1.8 dB @ 4 GHz Attenuation Accuracy: 0.3dB + 3% @ 3 GHz
40
4-Bit, Single Control Digital Attenuator
MAADSS0014
0.05 to 4.0 GHz
• • • • 30 dB Step Attenuator 2.0 dB LSB 2, 4, 8, & 16 dB Steps Insertion Loss 2.3 dB Low DC Power Consumption
RoHS 3mm PQFN
41
5-Bit, Single Control Digital Attenuator
MAADSS0015
0.05 to 4.0 GHz
• • • • 15.5 dB Step Attenuator 0.5 dB LSB RoHS 3mm PQFN 0.5, 1, 2, 4, 8 dB Steps Attenuation Accuracy: 0.3dB + 3% @ 4 GHz
42
5-Bit, Single Control Digital Attenuator
MAADSS0016
0.05 to 4.0 GHz
• • • • 31 dB Step Attenuator 1.0 dB LSB 1, 2, 4, 8, 16 dB Steps IIP3: >40 dBm @ 2.0 GHz
RoHS 3mm PQFN
43
6-Bit, Single Control Digital Attenuator
MAADSS0017
0.05 to 3.0 GHz
• • • • 31.5 dB Step Attenuator 0.5 dB LSB 0.5, 1, 2, 4, 8, 16 dB Steps Attenuation Accuracy: 0.3 dB + 3%
4 mm24-Lead PQFN
44
5-Bit, Single Control Digital Attenuator
MAADSS0018
2.0 to 6.0 GHz
• • • • 15.5 dB Step Attenuator 0.5 dB LSB RoHS 3mm PQFN 0.5, 1, 2, 4, 8 dB Steps Low Insertion Loss: 2.3 dB @ 6.0 GHz
45
4-Bit, Single Control Digital Attenuator
MAADSS0019
2.0 to 6.0 GHz
• • • • 15 dB Step Attenuator 1.0 dB LSB 1.0, 2, 4, 8 dB Steps RoHS 3mm PQFN Linearity: IIP3 = 42 dBm Attenuation Accuracy 0.3 dB = 3% @ 5 GHz
46
Broadband 4-Bit, Single Control Digital Attenuator
MAADSS0020
2.0 to 5.0 GHz
• • • • 4-Bit Single Control Attenuator 30 dB Step Attenuator 2 dB LSB 2, 4, 8, 16 dB Steps 2.6 dB Insertion Loss @ 6GHz
4 mm24-Lead PQFN
47
Broadband 5-Bit, Single Control Digital Attenuator
MAADSS0022
2.0 to 5.0 GHz
• • • • 5-Bit, Single Control Attenuator 31 dB Step Attenuator 1 dB LSB 1, 2, 4, 8, 16 dB Steps < 3 dB Insertion Loss @ 6GHz
4 mm24-Lead PQFN
48
Broadband 6-Bit, Single Control Digital Attenuator
MAADSS0023
2.0 to 5.0 GHz
• • • • 31.5 dB Step Attenuator 0.5 dB LSB 0.5, 1, 2, 4, 8, 16 dB Steps >40 dBm IIP3
4 mm24-Lead PQFN
49
Next Generation 4-Bit, Single Control Digital Attenuator
MAAD-000118
0.5 to 7.0 GHz
• • • • 15.5 dB Step Attenuator RoHS 3mm PQFN 0.5 dB LSB 0.5, 1, 2, 4, 8 dB Steps Low Insertion Loss: 2.3 dB @ 6.0 GHz
Insertion Loss, +25C
Relative Attenuation, +25C
Frequency (GHz)
50
Advanced Information
MAAD-000119
0.7 to 7.0 GHz
• • • • 15 dB Step Attenuator 1.0 dB LSB 1.0, 2, 4, 8 dB Steps RoHS 3mm PQFN Linearity: IIP3 = 42 dBm Attenuation Accuracy 0.3 dB = 3% @ 5 GHz
Insertion Loss Relative Attenuation, +25C
Frequency (GHz)
51
Advanced Information
MAAD-000120
0.7 to 7.0 GHz
• • • • 4-Bit Single Control Attenuator 30 dB Step Attenuator 2 dB LSB 2, 4, 8, 16 dB Steps 2.6 dB Insertion Loss @ 6GHz
Insertion Loss
RoHS 3mm PQFN
Relative Attenuation, +25C
Frequency (GHz)
52
Advanced Information
MAAD-000122
0.7 to 7.0 GHz
• • • • 5-Bit, Single Control Attenuator 31 dB Step Attenuator 1 dB LSB 1, 2, 4, 8, 16 dB Steps < 3 dB Insertion Loss @ 6GHz
Insertion Loss
RoHS 3mm PQFN
Relative Attenuation, +25C
Frequency (GHz)
53
Advanced Information
MAAD-000123
0.7 to 7.0 GHz
• • • • 31.5 dB Step Attenuator 0.5 dB LSB 0.5, 1, 2, 4, 8, 16 dB Steps >40 dBm IIP3
Insertion Loss
RoHS 3mm PQFN
Relative Attenuation, +25C
Frequency (GHz)
54
Future Development
Control • GaN Variable Voltage Attenuators
• Serial/Parallel
55
Contacts
Contacts
• For
– – –
Additional Information or Questions, Contact:
Tom Galluccio +1-978-656-2513 gallucct@macom.com
• For
Quotes and Orders, Contact Your Local MA-COM Sales Office or Distributor
57