Get documents about "christmas2010
Shared by: liuhongmei
-
Stats
- views:
- 19
- posted:
- 8/12/2011
- language:
- English
- pages:
- 56
Document Sample
6.5ltr Manual Vacuum 1.5hp Oil Free Direct Drive Compressor
Oil & Fluid Extractor • Air Displacement: 6.35cfm.
• Maximum Free Air Delivery:
4.70cfm.
NEW
• Maximum Pressure:
• 6.5ltr Capacity.
116psi/8bar.
• Ingenious vacuum device.
• Ideal for use where an
• Ideal for other liquids such as water
oil-free air delivery is required
and soluble oil.
and especially suited to
• To remove oil from a car engine,
small low pressure, touch-up
simply push the probe down the
and air brush spraying
dip-stick hole and pump the handle
applications.
on the top of the unit.
• Simple construction with
• Sets up a permanent fluid transfer
fewer components makes
while you do something else.
this unit practically
• Avoids searching for drain plug
maintenance-free.
keys and getting under the vehicle.
• Reduced weight gives
• Ideal for mobile mechanics.
greater portability and
• Model No. TP69
can be transported and
• List Price £83.95
even operated on its side.
• Model No. SAC02415
• List Price £239.95
Xmas Price Xmas Price FREE
£53.95 £159.95
exc exc 5pc Air
VAT VAT Accessory Kit
• Model No.
£63.39 £187.94
inc SAVE inc SAVE SA33/S
VAT 36% VAT 33% • List Price
£49.95
30+5 LED Cordless Lithium-ion N 1/2"Sq Drive Cordless
EW
Rechargeable Inspection Lamp Impact Wrench 325lb.ft
• Featuring 35 super bright LEDs, 30 used as an inspection lamp • Powerful, compact cordless impact wrench.
or 5 in the end for use as a directional torch. • Forward and reverse control integrated into housing
• Two 360° swivel hanging hooks for hands-free applications allowing for ease of use.
unit to be used horizontally or vertically. • Produces in excess of 441Nm (325lb.ft) of torque
• Three rubber covered magnets for protection against accidental damage, - enough to remove wheel nuts.
two magnets on the rear of the lamp for horizontal use and one on the • Superbly balanced tool with side handle and
end for vertical use. vibration reducing grip.
• Bottom quarter of the lamp rotates 180° allowing the unit to be positioned • Suitable for workshop applications.
for ease of use on any ferrous surface. • 24Volt Ni-Cd battery pack
• Replaceable shatterproof polycarbonate lens with a highly polished and 1 hour charger.
reflector board gives an increased spread of light. • Model No. CP2400
• Model No. LED3010 • List Price £299.95
• List Price £99.95
Xmas Price Xmas Price FREE
£59.95 exc
VAT £179.95 exc
VAT •
Second Battery
Model No.
£70.44 £211.44
inc SAVE inc SAVE CP2400BP
• List Price
VAT 40% VAT 40% £99.95
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise
Bottle Jacks 2tonne Short Chassis Car Ramps 1tonne Capacity per Ramp
Trolley Jack with Axle Stands 2tonne Capacity per Pair
& Storage Case
• Jack features steel chassis
with welded castor supports
and one-piece hydraulic unit.
• Min./Max. Saddle Height:
130/330mm.
• Max. Chassis Height: 140mm.
• Fitted with overload valve
and finger cover for extra
safety.
• Suitable
for the • 2tonne Capacity per pair.
hobby • Manufactured from
user 3mm steel section.
or as • Ramps coated with
• Heavy-duty bottle jack. an corrosion resistant finish.
• Cast base with threaded components for easy disassembly. emergency • Ramps stack together and
• Fully tested and fitted with overload valve mobile jack. will stand upright for
SAVE
to comply with the latest CE regulations. UP TO • Axle stands are constructed easy storage.
• Fitted with carrying handle. 56% entirely from steel and fold flat • Maximum Tyre Width:
for ease of storage. 175mm.
Model Min./Max. List Xmas Xmas • Fitted with double locking safety pin. • Model No. CAR1950
No. Height/ Price Price Price • List Price £39.95
Tonne Exc VAT Inc VAT • Min./Max. Height:
275/365mm.
SJ10 230/460mm / 10 £48.95 £28.95 £34.02 Xmas Price • Max. Capacity: 2tonne Xmas Price
£39.95 £31.95
exc each, 4tonne pair. exc
SJ15 230/460mm / 15 £71.95 £35.95 £42.24 VAT VAT
• Model No.
SAVE SAVE
SJ20 242/452mm / 20 £89.95 £39.95 £46.94 £46.94 inc
VAT 33% 1030CXDK
• List Price £59.95
£37.54 inc
VAT 20%
2tonne Professional 2.5tonne Low Entry 3tonne Standard Chassis
Short Chassis Trolley Jack Trolley Jack Trolley Jack
• Min./Max. Saddle Height: 132/440mm. • Min./Max. Saddle Height: 85/450mm. • Min./Max. Saddle Height:
• Chassis Length: 540mm. • Chassis Length: 600mm. 133/515mm.
• Fully portable professional • Heavy-duty chassis with strengthening flanges along the • Single-piece hydraulic unit
model. top edge for extra torsional rigidity under load. with heavy chassis design.
• Features American cog-type • Profiled lifting arm allows low • Integral American cog-type
integral handle release clearance height of just 85mm release mechanism and long
mechanism with long 2-piece making this unit suitable for two-piece handle.
handle. sports and custom cars. • Heavy-duty castors and
• Short chassis design with • Fitted with heavy-duty large saddle design
heavy-duty castors to assist one-piece hydraulic unit ease positioning
in positioning the jack under with pump-through action under vehicle.
the load. preventing handle locking • Fitted with safety
• Weight: 21kg. at maximum ram overload valve
• Model No. 1250CX extension. and
• List Price £114.95 • White saddle aids pump-through
positioning under valve to
vehicle and prevent
safety valve handle locking
prevents at maximum ram extension.
overloading. • Ideal for loaded vans
• Model No. up to 3.5tonne GVW.
2500LE • Model No. 3010CX SAVE
• List Price • List Price £159.95 38%
£169.95
Xmas Price Xmas Price Xmas Price FREE
£69.95 exc
VAT
SAVE
£89.95 exc
VAT
SAVE
£99.95 exc
VAT
Ratchet Type Axle Stands
3tonne Capacity per Stand
£82.19 inc
VAT 39% £105.69 inc
VAT 47% £117.44 inc
VAT
•
•
Model No. VS1003
List Price £29.95
3tonne Professional 5tonne Long Reach 10tonne Long Reach
Trolley Jack with Trolley Jack Trolley Jack
Rocket Lift • Min./Max. Saddle Height: 150/570mm • Min./Max. Saddle Height: 170/570mm.
• Min./Max. Saddle Height: 145/504mm. • Heavy-duty chassis with one piece hydraulic unit. • Heavy-duty chassis with one piece hydraulic unit.
• Chassis Length: 690mm. • Handle mounted safety release • Handle mounted safety release prevents inadvertent
• Single piece hydraulic unit with prevents inadvertent lowering of load. lowering of load.
heavy base design. • Includes large diameter saddle • Includes large diameter saddle for
• Integral American cog-type release for easier positioning under easier positioning under the
mechanism and two-piece handle. the jacking point. jacking point.
• Rocket lift feature brings lifting arm • Fitted with safety • Fitted with safety overload valve.
straight into contact with jacking overload valve. • Fully CE approved for general
point with a single pump of the • Fully CE approved for workshop applications.
handle. general workshop applications. • Model No. 10QJ
• Integral saddle pad provides • Model No. 5001 • List Price £999.95
protection for the jacking • List Price £749.95
point.
• Heavy-duty castor wheels
and 55mm wide
front wheels for
even load
distribution.
• Model No.
3003CXQ
• List Price
£189.95
Xmas Price Xmas Price Xmas Price
£109.95 exc
VAT
SAVE
£449.95 exc
VAT
SAVE
£579.95 exc
VAT
SAVE
£129.19 inc
VAT 42% £528.69 inc
VAT 40% £681.44 inc
VAT 42%
2 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Ratchet Type Axle Stands 1.25tonne Aluminium Trolley Jack 1.5tonne Aluminium
Pair with Rocket Lift Trolley Jack with Rocket Lift
• Min./Max. • Min./Max. Saddle Height: 98/455mm.
Saddle • Chassis Length: 600mm.
Height: • Made primarily for the motor racing enthusiast, this jack
79/375mm. weighs in at just 17.5kg.
• Chassis • The jack utilises many weight
Length: 590mm. saving techniques such
• Made primarily as skeletal lift arm and single
for the motor roller load wheel.
racing enthusiast, • Lifting bars are fitted either side
this jack weighs in of the anodised aluminium
VS trate
at just 11kg. chassis enabling fast,
Il l u
20 d
s • The jack utilises many lightweight pick-up.
02
weight saving • Model No.
techniques such as RJA1450
skeletal lift arm and • List Price
single roller load wheel. £269.95
• Rocket Lift feature brings
SAVE
saddle to maximum
• Cast iron support posts. UP TO height in just nine
• Tough steel plate welded bases. 43% full strokes.
• Model No.
Model Min./Max. List Xmas Xmas RJA1250
No. Height/ Price Price Price • List Price £189.95
Tonne Capacity Exc VAT Inc VAT
VS2002 260/420mm / 2 £24.95 £14.95 £17.57 Xmas Price Xmas Price
VS2003 287/427mm / 3 £31.95 £19.95 £23.44 £129.95 exc
VAT
SAVE
£169.95 exc
VAT
SAVE
VS2006 390/600mm / 6 £64.95 £36.95 £43.42 £152.69 inc
VAT 32% £199.69 inc
VAT 37%
2tonne Low Entry 2tonne Long Reach 3tonne Long Reach
Trolley Jack Trolley Jack Trolley Jack
• Min./Max. Saddle Height: 80/500mm. • Min./Max. Saddle Height: 115/500mm.
• Min./Max. Saddle Height: 90/500mm. • Max. Chassis Height: 170mm.
• Max. Chassis Height: 160mm. • Max. Chassis Height: 126mm.
• Heavy-duty steel chassis with unique • Heavy-duty long reach steel
• Heavy-duty long reach steel chassis design for easier
overhead parallel linkage allows chassis design for easier access
incredibly low minimum access access to deep-set jacking
to deep-set jacking points. points.
height of just 80mm. • Single-piece hydraulic unit
• Space saving combination • Single-piece hydraulic
allows a low minimum access unit allows a low minimum
hydraulic unit further reduces height of just 90mm.
maximum chassis height for access height of just
• Danish design with up to 115mm.
easy access to deep 3 years warranty
set jacking points. • Modern handle design
(registration required with a safety lift and
• Danish design with for 2nd & 3rd year).
up to 3 years warranty twist release mechanism
• Model No. 2010LR preventing accidental
(registration required • List Price £499.95
for 2nd & 3rd year). lowering.
• Model No.
2010S
• List Price
£429.95
• Danish design with up
to 3 years warranty
Xmas Price Xmas Price Xmas Price (registration required
£259.95 exc
VAT
SAVE
£319.95 exc
VAT
SAVE
£349.95 exc
VAT
SAVE
for 2nd & 3rd year).
• Model No.
£305.44 inc
VAT 40% £375.94 inc
VAT 36% £411.19 inc
VAT 36% 3010LR
• List Price £549.95
High Lift 5tonne High Lift 10tonne
Trolley Trolley Jack Trolley Jack
Jacks
• 1510HL
min/max.
saddle height
98/800mm.
• 2010HL
min/max.
saddle height
98/735mm.
• Ideal for
4x4 vehicles
or vehicles
with
a high
ground
clearance. • Min./Max. Saddle Height: 180/960mm. • Min./Max. Saddle Height: 160/580mm.
• Great for estate cars and vans. • Long chassis configuration provides nearly three metres • Designed with low chassis height of just 210mm which
• Suitable for loading bodyshop chassis jigs. of access, including the handle. enables access to lifting point deep under heavy vehicles.
SAVE • Suitable for loading bodyshop chassis jigs. • Heavy-duty hydraulic unit fitted with safety overload device.
• Danish design with up to 3 years warranty UP TO
• Danish design with up to 3 years warranty • Danish design with up to 3 years warranty
(registration required for 2nd & 3rd year). 40%
(registration required for 2nd & 3rd year). (registration required for 2nd & 3rd year).
Model Capacity List Xmas Xmas
No. Price Price Price • Model No. 5010HL • Model No. 10010SL
Exc VAT Inc VAT Xmas Price • List Price £1899.95 Xmas Price • List Price £1499.95
1510HL 1.5tonne £649.95 £399.95 £469.94 £1149.95 exc
VAT
SAVE
£899.95 exc
VAT
SAVE
2010HL 2tonne £829.95 £499.95 £587.44 £1351.19 inc
VAT 39% £1057.44 inc
VAT 40%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 3
0.6tonne 1tonne 1.5tonne Floor
Vertical Vertical Transmission Jack
Transmission Transmission
• Min./Max. Saddle Height:
Jack Jack 185/730mm.
• Precision valve allows
• Min./Max. Saddle • Min./Max. Saddle delicate adjustment when
Height: 1175/1985mm. Height: 1120/1950mm. taking out gearbox and
• High speed lift to • High speed lift to realigning during
gearbox - just lift piston. gearbox - just lift piston. replacement.
• Foot pedal operation • Foot pedal operation • Includes two chains
keeps hands free. keeps hands free. for safe loading.
• Spring loaded dead • Spring loaded dead • Supplied with
man’s safety release man’s safety release pulling hook
control control and four
reduces reduces castors for extra
the the manoeuvrability
risk of risk of in confined spaces.
inadvertent inadvertent • Fully adjustable saddle
lowering. lowering. with forward and
• Highly manoeuvrable • Highly manoeuvrable backward tilt.
on castors. on castors. • Model No.
• Model No. 600TR • Model No. 1000TR TJ1500F
• List Price £339.95 FREE • List Price £429.95 FREE • List Price
Adjustable Gearbox Support Adjustable Gearbox Support
£699.95
500kg Capacity 1000kg Capacity
• Model No. ADT3 • Model No. ADT5
Xmas Price • List Price
£129.95
Xmas Price • List Price
£169.95
Xmas Price
£219.95 exc
VAT
SAVE
£259.95 exc
VAT
SAVE
£399.95 exc
VAT
SAVE
£258.44 inc
VAT 35% £305.44 inc
VAT 40% £469.94 inc
VAT 43%
0.6tonne Vertical 1tonne Vertical 1.5tonne Floor
Transmission Transmission Transmission Jack
Jack with Jack with • Min./Max. Saddle Height: 160/870mm.
• Supplied with chain for safe loading.
Rocket Lift Rocket Lift • Precision valve allows delicate adjustment when taking
out gearbox and realigning during replacement.
• Min./Max. Saddle • Min./Max. Saddle • Four castors for extra
Height: 1125/1950mm. Height: 1140/1960mm. manoeuvrability in
• Rocket Lift feature to • Rocket Lift feature to confined spaces.
reduce time and effort. reduce time and effort. • Fully
• Only a maximum of 30 • Only a maximum of 42 adjustable
pumps needed to pumps needed to saddle with
reach full height. reach full height. forward and
• Single foot pedal • Single foot pedal operation backward tilt.
operation keeps hands keeps hands free • Model No. 1500E
free during lifting process. during lifting process. • List Price £939.95
• Spring loaded dead man’s • Spring loaded dead man’s
control decreases risk control decreases risk of
of inadvertent lowering. inadvertent lowering.
• Saddle is reversible • Saddle is reversible
allowing a jack pad to be allowing a jack pad to be
fitted to support items fitted to support items
other than transmissions. other than transmissions.
• Model No. 600TRQ
• List Price £379.95
FREE • Model No. 1000TRQ
• List Price £479.95
FREE
Adjustable Gearbox Support Adjustable Gearbox Support
500kg Capacity 1000kg Capacity
• Model No. ADT3 • Model No. ADT5
Xmas Price • List Price
£129.95
Xmas Price • List Price
£169.95
Xmas Price
£259.95 exc
VAT
SAVE
£329.95 exc
VAT
SAVE
£599.95 exc
VAT
SAVE
£305.44 inc
VAT 32% £387.69 inc
VAT 31% £704.94 inc
VAT 36%
1tonne 1tonne Folding
Folding Crane Engine Crane
Quick Lift 1.1tonne Folding
• Super economy model
delivered in knock-down • Fast folding for easy Engine Crane
form for reduced freight storage and transportation.
cost - requires some • Heavy-duty castors. Pump • Folds quickly.
self-assembly. access from side. • Takes up little
• Fast folding design • Quick lift feature brings space when not in use.
provides easy storage unladen jib to full elevation • Lifts 1100kg at
and transportation. with nineteen strokes min extension 955mm.
• Lifts 1000kg at 893mm of the handle. • Lifts an amazing 700kg
jib extension. • 5 Jib lengths - at maximum at max extension 1375mm.
• Weighs only 74kg extension of • Made in Scandinavia.
and is perfect for mobile 1020mm lifts 600kg. • Complies with HSE
or workshop use. • Designed for heavy lifting gear regulations.
• Model No. SC10 professional use and fitted • Model No. WF10
• List Price £279.95 with dead man's control. • List Price £999.95
• Model No. WF10Q
• List Price £539.95
FREE
Engine Stand
350kg Capacity
• Model No. ES350
Xmas Price • List Price £66.95 Xmas Price Xmas Price
£189.95 exc
VAT
SAVE
£339.95 exc
VAT
SAVE
£499.95 exc
VAT
SAVE
£223.19 inc
VAT 32% £399.44 inc
VAT 37% £587.44 inc
VAT 50%
4 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Engine Stand Engine Stand Engine Stand
350kg Capacity 450kg Capacity 550kg Capacity
• Accepts wide variety of • Accepts wide variety of • Accepts wide variety
engines and engines and transmissions. of engines
transmissions. • Head swivels through 360°. and transmissions.
• Head swivels • Swivel castors for easy • Head swivels through 360°.
through 360°. manoeuvrability. • Swivel castors for
• Swivel castors for • Fully adjustable easy manoeuvrability.
easy manoeuvrability. mounting arms. • Fully adjustable
• Fully adjustable • Model No. ES450 mounting arms.
mounting arms. • List Price £84.95 • Model No. ES550
• Model No. ES350 • List Price £99.95
• List Price £66.95
Xmas Price Xmas Price Xmas Price
£44.95 exc
VAT
SAVE
£54.95 exc
VAT
SAVE
£59.95 exc
VAT
SAVE
£52.82 inc
VAT 33% £64.57 inc
VAT 35% £70.44 inc
VAT 40%
Aluminium Engine Support Beam Engine Support Beam
300kg Capacity 500kg Capacity
• Designed to support and accurately position engines
during maintenance operations such as replacing
anti-vibration mountings and certain body panels.
• Lightweight aluminium, weighs
only 8.7kg, making it easy to
manoeuvre without
compromising the
maximum
load
capacity.
• Also used
as an aid for the
removal of gearboxes • Designed to support and accurately position
and transmissions. engines during maintenance operations.
• Beams supported on rubber feet and fine adjustment • Ideal for supporting the engine whilst replacing
control is obtained by using a screw/hook mechanism. anti-vibration mountings and certain body panels.
Xmas Price • Supplied with a short
Xmas Price • Aids with the removal of gearboxes and
£89.95 exc
VAT
SAVE
NEW length of chain.
• Model No. ES300A
£64.95 exc
VAT
SAVE
transmissions.
• Model No. ES500
£105.69 inc
VAT 25% • List Price £119.95 £76.32 inc
VAT 41% • List Price £109.95
50ltr Workshop 60ltr Mobile Parts
Parts Cleaning Tank Cleaning Tank 230V
• Heavy-duty three tier parts washer with
• Fully sealed electric motor
one-piece tank, draining board and bucket.
with magnetic drive pump unit.
• Fully sealed electric motor with magnetic
• Flexible metal nozzle directs
drive pump unit.
solvent over work.
• Lid features self-latching fusible link
• Lid features self-latching fusible
which automatically snaps lid shut
link which automatically snaps
in the event of a fire.
lid shut in the event of a fire.
• Includes removable shelf inside tank.
• Supplied with removable shelf,
• Flexible metal nozzle directs solvent
small parts basket and
over work.
workshop stand with integral
• Supplied with Ø100mm castors for
storage shelf.
easy manoeuvrability.
• Model No. SM19
• Model No. SM26
• List Price £169.95
• List Price £269.95
Xmas Price Xmas Price
£99.95 exc
VAT
SAVE
£159.95 exc
VAT
SAVE
£117.44 inc
VAT 41% £187.94 inc
VAT 41%
80ltr Parts Cleaning Tank 85ltr Air Operated Parts Cleaning Tank
• One-piece tank construction with triple • Heavy-duty steel one-piece tank.
baked enamel finish and fitted with fully • Fitted with fully sealed and air
sealed, magnetic drive pump unit. operated pump unit.
• Fluid recirculated through replaceable • Extra large capacity tank is
filter element and directed onto suitable for cleaning larger
workpiece through flexible engine components.
metal delivery nozzle. • Includes air blow gun for fast
• Extra large capacity tank suitable for drying of workpiece.
cleaning larger engine components. • Lid of tank fitted with fusible
• Lid of tank fitted with fusible link hinge link hinge which automatically
which automatically snaps lid snaps lid shut in the event
shut in the event of fire. of a fire.
• Supplied with removable shelf • Supplied with removable shelf
and parts basket. and parts basket.
• Model No. SM40 • Model No. SM223
• List Price £399.95 • List Price £429.95
Xmas Price Xmas Price
£199.95 exc
VAT
SAVE
£294.95 exc
VAT
SAVE
£234.94 inc
VAT 50% £346.57 inc
VAT 31%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 5
Aluminium Socket Retaining 1/4", 3/8" & 1/2"Sq Drive Ø150mm Magnetic Collector
Rails with 14 Clips Socket Rail Tray
• Steel panel with • Ø150mm Stainless
5 x 430mm rails. steel bowl.
• Supplied with • High powered Ø80mm
clips suitable magnet with
for retaining non-marking cover.
NEW 1/4”, 3/8” & • Ideal for retaining
1/2”Sq drive screws, nuts and
sockets plus bolts during
two bit holders. dismantling operations.
SAVE • Fitted with carry • Attach to any ferrous
• Anodised aluminium socket rail with nylon clips. UP TO
handles and metal surface.
• Each rail holds up to 14 sockets. 39%
hanging holes. • Model No. AK231
Model No. Drive List Xmas Xmas • Model No. AK272
• List Price £35.95
FREE • List Price £7.95
Price Price Price 16-in-1 Stubby Precision
Exc VAT Inc VAT Ratchet Screwdriver
• Model No. AK97315
SR1414 1/4"Sq £9.95 £6.45 £7.58 Xmas Price • List Price £9.95 Xmas Price
SR3814 3/8"Sq £12.95 £7.95 £9.34 £23.95 exc
VAT
SAVE
£4.45 exc
VAT
SAVE
SR1214 1/2"Sq £15.95 £9.95 £11.69 £28.14 inc
VAT 33% £5.23 inc
VAT 44%
700mm Flexible Magnetic Pick-Up Telescopic Magnetic Pick-Up Tool 5pc Palm Ratchet Set
& Claw Tool with LED Light, Inspection Mirror 1/4" & 3/8"Sq Drive
• Bowden cable construction
enables access to confined areas.
& Washer Jet Tool • Manufactured
• 0.7kg Magnetic pick-up with
energy ring, reduces side
NEW from Chrome
Vanadium
pull aiding the retrieval steel with a fully
of objects at polished finish.
full reach. • Features ultra
smooth 72-tooth
ratchet action.
NEW • High quality metal bodied seven section telescopic LED
• Comprises of two palm
ratchets, two socket
inspection/pick-up tool with pocket clip. adaptors and
• Features anodised aluminium housing. • Features removable Ø40mm mirror, ideal for inspections
in low light areas.
bit adaptor. NEW
• Model No. AK6536
• List Price £12.95 • Model No. AK6537 • List Price £27.95
Xmas Price Xmas Price Xmas Price
£8.45 exc
VAT
SAVE
£15.95 exc
VAT
SAVE
£17.95 exc
VAT
SAVE
• Model No.
AK6959
£9.93 inc
VAT 35% £18.74 inc
VAT 43% £21.09 inc
VAT 40% • List Price £29.95
7pc 1/4", 3/8" & 1/2"Sq Drive 6pc Parallel Pin Punch Set 3pc Power Tool Socket
Universal Joint & Socket Adaptor Set • Hardened, tempered and fully Adaptor Set
polished Chrome Vanadium
steel punches. • Manufactured
• Supplied with from hardened
composite retainer. and tempered
• Sizes: 2, 3, 4, Chrome Vanadium
5, 6, 8mm. steel with 1/4"
• Model No. hexagon shanks.
AK9128 • Ideal for use with all
electric/air drills.
NEW • List Price
£24.95 • Suitable for repetitive
applications which require
• Manufactured from hardened and tempered
1/4", 3/8" or 1/2"Sq drive sockets.
Chrome Vanadium steel with a fully polished finish.
• Features spring-ball socket retention.
• Supplied in a tough composite case.
• Model No. AK2737 • List Price £25.95
• Model No. AK4929
• List Price £9.95
NEW
Xmas Price Xmas Price Xmas Price
£16.95 exc
VAT
SAVE
£13.95 exc
VAT
SAVE
£5.45 exc
VAT
SAVE
£19.92 inc
VAT 35% £16.39 inc
VAT 44% £6.40 inc
VAT 45%
8pc Impact Socket Adaptor Set 13pc 1/2"Sq Drive Impact Socket 16pc 1/2"Sq Drive Deep Impact
with Storage Case Set - Metric Socket Set - Metric
• Comprehensive set of impact • Manufactured from Chrome • Manufactured from Chrome
adaptors for use on Vanadium steel, with a Vanadium steel, with a
all types of phosphate finish. phosphate finish.
impact tools. • Standard • Deep six point
• Manufactured depth WallDrive®
from drop-forged six point sockets allow
Chrome Vanadium WallDrive® a transfer of up
steel with phosphate sockets to 30% more torque
finish for added allow a transfer to the fixing.
corrosion protection. of up to 30% • Sizes: 10, 11, 12, 13, 14,
• Contents: 1/4"F x 3/8"M, more torque 15, 16, 17, 18, 19, 21,
3/8"F x 1/4"M, 3/8"F x 1/2"M, 1/2"F x 3/8"M, 1/2"F x 3/4"M, to the fixing. 22, 24, 27, 30, 32mm.
3/4"F x 1/2"M, 3/4"F x 1"M, 1"F x 3/4"M. • Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm. • Model No. AK5816M
• Model No. AK5900B • List Price £34.95 • Model No. AK5613M • List Price £26.95 • List Price £63.95 FREE
LED Penlight
Torch 2 x AAA
Xmas Price Xmas Price Xmas Price • Model No. AK6507
£21.95 £15.95 £45.95
• List Price £19.95
exc exc exc
VAT VAT VAT
SAVE SAVE SAVE
£25.79 inc
VAT 37% £18.74 inc
VAT 41% £53.99 inc
VAT 28%
6 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
24pc 1/4"Sq Drive Socket Set 20pc 3/8"Sq Drive Socket Set
WallDrive® - Metric WallDrive® - Metric
• Deluxe professional socket set with • Deluxe professional socket set with
standard and deep, heat heat treated, mirror polished,
treated, mirror polished, Chrome Vanadium sockets.
Chrome Vanadium sockets. • Contents: Sockets; 6, 7, 8,
• Contents: Standard 9, 10, 11, 12, 13, 14, 15,
Sockets; 4-14mm, 16, 17, 19, 22, 24mm,
Deep Sockets; 8-13mm, Extension Bars; 75,
Extension Bars; 100, 150mm, Universal Joint,
150mm, Sliding T-Bar, 3/8"Sq Drive Single Pawl
1/4"Sq Drive Single Pawl Pear-Head Flip Reverse
Pear-Head Flip Reverse Ratchet Wrench with
Ratchet Wrench with 48 Teeth, 48 Teeth, Sliding T-Bar
Spinner Handle, Universal Joint. Adaptor 3/8"(M)x1/2"(F).
• Model No. AK851 • Model No. AK854
• List Price £59.95 • List Price £69.95
Xmas Price Xmas Price
£29.95 exc
VAT
SAVE
£34.95 exc
VAT
SAVE
£35.19 inc
VAT 50% £41.07 inc
VAT 50%
39pc 3/8"Sq Drive Socket Set 23pc 1/2"Sq Drive Socket Set
WallDrive® - Metric WallDrive® - Metric
• Deluxe professional socket set with • Deluxe professional socket set with
standard and deep, heat treated, heat treated, mirror polished,
mirror polished, Chrome Chrome Vanadium sockets.
Vanadium sockets. • Contents: Sockets; 8, 10,
• Contents: Standard Sockets; 11, 12, 13, 14, 15, 16, 17,
6-24mm, Deep Sockets; 8-19mm, 18, 19, 21, 22, 24, 27, 30,
Extension Bars; 75, 100, 32mm, Universal Joint,
150mm, Universal Joint, Sliding Extension Bars; 75, 100,
T-Bar Adaptor 3/8"(M) x 1/2"(M), 150mm, Sliding T-Bar
3/8"Sq Drive Single Pawl Adaptor 1/2"(M) x 3/8"(F),
Pear-Head Flip Reverse Ratchet 1/2"Sq Drive Pear-Head
Wrench with 48 Teeth, TRX-Star* Flip Reverse Ratchet
Bits 10mm x 30mm; T20-T55, Wrench with 48 Teeth.
Coupler 3/8" x 10mm, Spark Plug • Model No. AK857
Sockets; 16, 21mm. • List Price £94.95
• Model No.
Xmas Price AK855 Xmas Price
£52.95 exc
VAT
SAVE
£49.95 exc
VAT
SAVE
£62.22 inc
VAT 44% • List Price
£94.95 £58.69 inc
VAT 47%
33pc 1/2"Sq Drive Socket Set 63pc 1/4" & 1/2"Sq Drive Socket
WallDrive® - Metric Set - WallDrive® - Metric
• Deluxe professional socket set with
• Deluxe professional socket set
heat treated, mirror polished,
with heat treated, mirror
Chrome Vanadium sockets.
polished, Chrome
• Contents: Sockets; 8, 9,
Vanadium sockets
10, 11, 12, 13, 14, 15, 16,
covering sizes from
17, 18, 19, 20, 21, 22, 23,
4 to 32mm.
24, 25, 26, 27, 28, 29, 30,
• Flip reverse, 48-tooth,
32, 34, 35, 36mm, Extension
comfort grip, 1/4"
Bars; 125, 250mm, Universal
and 1/2"Sq drive
Joint, 1/2"Sq Drive Pear-Head
ratchet handles with
Flip Reverse Ratchet Wrench
push-button quick
with 48 Teeth, 380mm Breaker
release.
Bar, Sliding T-Bar Adaptor
• Model No. AK859
1/2"(M)x3/8"(F).
• List Price £159.95
• Model No. AK858
Xmas Price • List Price
£169.95
Xmas Price
£89.95 exc
VAT
SAVE
£79.95 exc
VAT
SAVE
£105.69 inc
VAT 47% £93.94 inc
VAT 50%
NEW
221pc 1/4", 3/8" & 26pc 3/4"Sq Drive Socket Set
1/2"Sq Drive WallDrive® - DuoMetric®
Socket Set Available Late
October
• Manufactured from heat treated drop-forged
Chrome Vanadium steel, fully polished
WallDrive® for corrosion resistance.
• Deluxe professional • Metric: 22-46mm.
socket set with heat treated, • Imperial: 15/16"-1-3/4".
mirror polished Chrome • Supplied in heavy-duty
Vanadium steel sockets. impact resistant
• Covers sizes from 4 to 32mm. carry-case.
• Includes 48-tooth gear-to-gear • Model No. AK2582
comfort grip ratchet handles, • List Price £219.95
spark plug sockets, extension bars,
female TRX-Star* sockets, socket bits,
combination spanners, bits, hex keys
and accessories.
• Model No.
AK8958
Xmas Price • List Price Xmas Price
£159.95 £99.95
exc £269.95 exc
VAT VAT
SAVE SAVE
£187.94 inc
VAT 41% £117.44 inc
VAT 55%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 7
10pc Fully Polished Long 10pc Fully Polished Extra-Long 10pc Fully Polished Long 10pc Fully Polished Extra-Long
Hex Key Set - Metric Hex Key Set - Metric Ball-End Hex Key Set - Metric Ball-End Hex Key Set - Metric
• Manufactured • Manufactured • Manufactured • Manufactured
from Chrome from Chrome from Chrome from Chrome
Vanadium Vanadium Vanadium Vanadium
steel with a steel with a steel with steel with
fully polished
mirror finish.
fully
polished NEW
a fully
polished
a fully
polished NEW
• Keys range mirror finish. mirror finish. mirror finish.
in length • Keys range • Keys range in • Keys range in
from 70mm in length length from 70mm length from 100mm
to 180mm from 100mm to 230mm to 180mm and in to 230mm and in
and in size from and in size from size from 2mm to size from 2mm to
2mm to 10mm.
• Model No. AK7166 NEW
2mm to 10mm.
• Model No. AK7167
10mm.
• Model No. AK7168 NEW 10mm.
• Model No. AK7169
• List Price £15.95 • List Price £19.95 • List Price £17.95 • List Price £21.95
Xmas Price Includes Xmas Price Includes Xmas Price Includes Xmas Price Includes
7mm 7mm 7mm 7mm
£8.95 exc
VAT
SAVE
£10.95 exc
VAT
SAVE
£9.95 exc
VAT
SAVE
£11.95 exc
VAT
SAVE
£10.52 inc
VAT 44% £12.87 inc
VAT 45% £11.69 inc
VAT 45% £14.04 inc
VAT 46%
9pc Fully Polished Long 9pc Fully Polished Extra-Long 9pc Fully Polished Long 9pc Fully Polished Extra-Long
TRX-Star* Key Set TRX-Star* Key Set Security TRX-Star* Key Set Security TRX-Star* Key Set
• Manufactured • Manufactured • Manufactured • Manufactured
from Chrome from Chrome from Chrome from Chrome
Vanadium Vanadium Vanadium Vanadium
steel with a steel with a steel with a steel with a
fully polished fully polished fully polished fully polished
mirror finish. mirror finish. mirror finish. mirror finish.
• Keys range in length • Keys range in length • Keys range in length • Keys range in length
from 70mm to 180mm from 90mm to 230mm from 70mm to 180mm from 90mm to 230mm
and in size from and in size from and in size from and in size from
T10 to T50. T10 to T50. T10 to T50. T10 to T50.
• Model No. • Model No. • Model No. • Model No.
AK7170 NEW AK7171 AK7172 NEW AK7173
• List Price • List Price • List Price • List Price
£17.95 £20.95
NEW £18.95 £22.95
NEW
Xmas Price Xmas Price Xmas Price Xmas Price
£9.95 exc
VAT
SAVE
£11.45 exc
VAT
SAVE
£10.45 exc
VAT
SAVE
£12.45 exc
VAT
SAVE
£11.69 inc
VAT 45% £13.45 inc
VAT 45% £12.28 inc
VAT 45% £14.63 inc
VAT 46%
17pc Punch Set 8pc T-Handle 8pc T-Handle
Ball-End Hex TRX-Star* Key Set
Key Set
Metric
• Chrome Vanadium
steel with mirror finish.
• Contents: 6 x Long
Pin Punches,
6 x Pin Punches,
5 x Taper Punches. • Short and long, hardened • Short and long, hardened and tempered,
• Supplied with stand. and tempered, Chrome Vanadium steel shafts. Chrome Vanadium steel shafts.
• Model No. AK9130 • Tough, composite, comfort grip handle with hanging • Tough, composite, comfort grip handle with hanging
• List Price £69.95 hole allows extra torque to be applied to the fixing. hole allows extra torque to be applied to the fixing.
• Model No. AK7144 • Model No. AK7145
• List Price £34.95 • List Price £33.95
Xmas Price Xmas Price Xmas Price
£36.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£43.42 inc
VAT 47% £23.44 inc
VAT 43% £23.44 inc
VAT 41%
10pc Impact 6pc Screwdriver 3pc VDE Approved
Driver Set with Set VDE/TUV/GS Pliers Set
Protection Approved • VDE
Grip Approved.
• Induction
hardened
• Heavy-duty 1/2"Sq cutting
drive impact driver. edges.
• Chrome • Soft grip
• Composite handle with
Molybdenum shafts handles
integral knuckle guard.
with magnetic tip and for comfort
• Twist reverse for operation
corrosion resistant precision blade. and control.
in either direction.
• Fully insulated to VDE/TUV/GS and EN 60900 • Cutting Capacities
• Hammer-through cap.
standards to protect from electric shocks up to 1000V. Ø1.8, Ø2.0 &
• Model No. AK2082
• Model No. AK6122 Ø2.3mm.
• List Price £32.95
• List Price £26.95 • Model No. AK83453
• List Price £51.95
Xmas Price Xmas Price Xmas Price
£18.95 exc
VAT
SAVE
£15.95 exc
VAT
SAVE
£21.95 exc
VAT
SAVE
£22.27 inc
VAT 42% £18.74 inc
VAT 41% £25.79 inc
VAT 58%
8 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Magnetic Bit Holder 15pc Colour Coded NEW 62pc Power Tool/ NEW
S2 Power Tool Security Bit Set
Bit Set • One of the most comprehensive driver and
security bit sets available.
• Forged from high • High quality Chrome Vanadium
quality Chrome steel bits.
Vanadium S2 steel. • Includes quick release chuck.
• Popular range • Suitable for a wide
of bits for the variety of
professional user. applications.
• Chrome Vanadium steel quick release adaptor • Colour coded for • Supplied in
suitable for use with 1/4" hex drive bits. guaranteed fast storage case.
• Push the colour sleeve forward to magnetize and identification and includes • Model No.
retain fixing. Pull back to release bit. automatic quick-release AK2108
• Size: 1/4"Hex M - 1/4"Hex F. chuck. • List Price £24.95
• Model No. AK4927 • Supplied in handy flip-up
• List Price £8.95 storage case.
Xmas Price Xmas Price Xmas Price
£3.95 exc
VAT
SAVE
£11.95 exc
VAT
SAVE
• Model No. £14.95 exc
VAT
SAVE
£4.64 inc
VAT 56% £14.04 inc
VAT 40% AK2103
• List Price £19.95
£17.57 inc
VAT 40%
10pc 1/4" & 3/8"Sq Drive Security 10pc 3/8"Sq Drive 100mm TRX-Star* 10pc 1/2"Sq Drive 100mm TRX-Star*
TRX-TS* Socket Bit Set Socket Bit Set Socket Bit Set
• Chrome Vanadium • Forged Chrome • Forged Chrome
steel sockets with Vanadium steel Vanadium steel
S2 steel hex sockets with S2 sockets with S2
stock bits. steel hex stock bits. steel hex
• Five sided • Sockets heat stock bits.
security treated and • Sockets heat
TRX-TS* chrome plated treated and
bits for resistance chrome plated
suitable for a range of automotive and electrical applications. to corrosion. for resistance
• Knurled ring on sockets to assist gripping with oily fingers. • Dual satin/chrome to corrosion.
• Contents: 1/4"Sq Drive; TS8H, TS10H, TS15H, TS20H, finish with • Dual satin/chrome finish with
TS25H, 3/8"Sq Drive; TS27H, TS30H, TS4H0, TS45H, knurled ring to assist gripping with oily fingers. knurled ring to assist gripping with oily fingers.
TS50H. • Supplied on socket rail. • Supplied on socket rail.
• Model No. AK6227
• List Price £29.95 NEW • Model No. AK6236
• List Price £32.95
NEW • Model No. AK6237
• List Price £39.95 NEW
Xmas Price Xmas Price Xmas Price
£17.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£23.95 exc
VAT
SAVE
£21.09 inc
VAT 40% £23.44 inc
VAT 39% £28.14 inc
VAT 40%
12pc 100mm 1/4", 3/8" & 1/2"Sq Drive 14pc 1/4", 3/8" & 1/2"Sq Drive 6pc 3/8"Sq Drive Hex Key
TRX-Star* Socket Bit Set Female TRX-Star* Socket Set - E4-24 Socket Set - Metric
• Drop-forged Chrome Vanadium • Forged Chrome Vanadium
steel sockets with steel sockets and
S2 steel hex bits.
TRX-Star* bits. • Sockets are heat
• Sockets heat treated, chrome
treated and chrome plated and satin
plated for resistance finished.
to corrosion. • Knurled rings
• Dual satin/chrome assist the
finish with knurled • Forged Chrome Vanadium steel sockets.
• Heat treated and chrome plated for resistance to gripping of
ring to assist the sockets
gripping with corrosion.
with oily fingers. • Sizes: 4, 5, 6, 7, 8, 10mm.
NEW
oily fingers. • Sizes: E4-8, E10-14 & E16-24.
• Model No. AK618 • Model No. AK656
• Model No. AK6221 SAVE • List Price £19.95
• List Price £36.95 • List Price £33.95 30%
Xmas Price Xmas Price Xmas Price FREE
6pc Driver
£21.95 exc
VAT
SAVE
£14.95 exc
VAT
SAVE
£13.95 exc
VAT Folding Key Set
• Model No.
£25.79 inc
VAT 41% £17.57 inc
VAT 56% £16.39 inc
VAT •
AK61312
List Price £11.95
30pc TRX-Star* 42pc TRX-Star*/Spline/ 56pc Ribe/Spline/Hex/
Socket & Bit Set Hex Bit Set Security TRX-Star*
• Drop-forged Chrome
Vanadium steel
3/8"& 1/2" Bit Set 3/8" & 1/2"
sockets
hardened,
Sq Drive Sq Drive
tempered
and
satin/polished • Manufactured
from Chrome • Manufactured
chrome plated
Vanadium steel. from Chrome
with knurled ring.
• Long and short Vanadium
• Bits manufactured
TRX-Star*, spline and hex bits. 6150 steel.
from S2 steel.
• Includes 3/8" and 1/2"Sq drive to 10mm • 3/8" and 1/2"Sq drive
• Supplied in storage case.
hex Chrome Vanadium steel bit adaptors. to 10mm hex adaptors.
• Model No. AK619
• Model No. AK219 • Model No. AK21956 SAVE
• List Price £39.95
• List Price £46.95 36%
• List Price £31.95
Xmas Price Xmas Price Xmas Price FREE
£19.95 £15.95 £29.95
exc exc exc Bit Driver 6/10mm
VAT VAT VAT • Model No. AK4920
SAVE SAVE • List Price £14.95
£23.44 inc
VAT 50% £18.74 inc
VAT 50% £35.19 inc
VAT
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 9
Stubby Flexi-Head Ratchet Wrenches 3/8"Sq Drive Flexible Extra Long Ratchet Wrenches
Ratchet Wrench
NEW
NEW
NEW
• Hardened and
• Chrome Vanadium steel tempered Chrome
72-tooth ratchet wrenches. • Hardened and tempered Vanadium steel ratchet
• Hardened, tempered and finished in deep polished Chrome Vanadium steel ratchet wrenches with a fully polished mirror finish.
high chrome. wrench with a fully polished mirror finish. • Ultra-smooth 72-tooth pear head ratchet
• Slim style contoured handle with pear-head design. • Slim style contoured handle with pear-head design. and soft grip handle for added comfort and control.
• Stubby configuration gives improved access in confined spaces. • 180° Flexi-head and handle offer increased access • Extra long shaft improves access for hard to reach
• Features 180° flexi-head, flip for hard to reach applications. applications.
SAVE SAVE
reverse and quick release UP TO • Features flip reverse and quick release mechanism. • Features flip reverse and spring-ball
mechanism. 41% • Model No. AK673 45%
socket retention.
• List Price £34.95
Model No. Drive List Xmas Xmas Model Drive Length List Xmas Xmas
Price Price Price No. Price Price Price
Exc VAT Inc VAT Xmas Price Exc VAT Inc VAT
AK660SF 1/4"Sq £21.95 £12.95 £15.22 £18.95 exc
VAT
SAVE
AK6694 3/8"Sq 435mm £39.95 £21.95 £25.79
AK661SF 3/8"Sq £24.95 £14.95 £17.57 £22.27 inc
VAT 46% AK6695 1/2"Sq 600mm £59.95 £32.95 £38.72
Extra-Long Flexi-Head 45pc 3/8"Sq Drive 24pc 3/8"Sq Drive Total
Ratchet Wrenches Socket Set Drive Socket Set
• 17 Chrome Vanadium
• Flip reverse
NEW gear-to-gear
steel spline sockets.
• All sockets are
ratchet with
equivalent
• Hardened and quick
to Metric
tempered Chrome socket
hex and
Vanadium steel ratchet release.
bi-hex
wrenches with a fully polished • Chrome
sockets.
mirror finish. Vanadium
• Many equivalent
• Ultra smooth 72-tooth pear head ratchet WallDrive®
to Imperial hex
and soft grip handle for added comfort and control. standard and
and TRX-Star*
• 180° Flexi-head and extra long shaft improves SAVE
deep sockets up to
sockets.
access for hard to reach applications. UP TO 13/16"/22mm.
• Includes two spark plug
• Features flip reverse and spring-ball socket retention. 45% • Model No. AK692
sockets, extension bars, T-bar, universal joint and 3/8"Sq drive
• List Price £99.95
Model Drive Length List Xmas Xmas ratchet wrench.
• Model No. AK699
No. Price Price Price
Exc VAT Inc VAT Xmas Price Xmas Price • List Price £67.45
AK6697 3/8"Sq 455mm £44.95 £24.95 £29.32 £59.95 exc
VAT
SAVE
£44.95 exc
VAT
SAVE
AK6698 1/2"Sq 600mm £64.95 £35.95 £42.24 £70.44 inc
VAT 40% £52.82 inc
VAT 33%
13pc Go-Through WallDrive® 5pc 3/8"Sq Drive Breaker Bars
• Hardened and tempered
Socket Set - Metric Wobble Extension Chrome Vanadium steel bars with
• Heat treated Chrome
Bar Set high chrome finish.
• Long, slim style handle with
Vanadium steel spring loaded socket
WallDrive® retention.
sockets. • Fully replaceable
• Chrome knuckle
Molybdenum joint.
steel, 24-tooth,
flip reverse
ratchet ring SAVE
wrench (14 x 17mm) UP TO
• Forged Chrome Vanadium steel shafts, heat treated and 48%
with satin finish.
chrome plated with mirror finish.
• Model No. AK6927
• Cut-away tips allow sockets to be driven with shaft offset Model Drive Length List Xmas Xmas
• List Price £39.95
of 10°. No. Price Price Price
• Model No. AK767 Exc VAT Inc VAT
Xmas Price Xmas Price • List Price £31.95
AK729 3/8"Sq 450mm £17.95 £9.95 £11.69
£22.95 exc
VAT
SAVE
£17.95 exc
VAT
SAVE
AK730 1/2"Sq 600mm £24.95 £12.95 £15.22
£26.97 inc
VAT 43% £21.09 inc
VAT 44% AK7302 1/2"Sq 750mm £29.95 £15.95 £18.74
3/4"Sq Drive Extendable 3/4"Sq Drive Extendable 1/2"Sq Drive Torque Wrench
Breaker Bar 700/1000mm Ratchet Wrench 700/1000mm Micrometer Style
NEW NEW
• Range:
40-210Nm/30-155lb.ft.
• Calibration tolerance in accordance with
• Chrome Vanadium steel
• Chrome Vanadium steel ratchet wrench. BS EN ISO 6789:2003.
breaker bar.
• Hardened, tempered and finished in deep • Scales graduated in both Nm and lb.in/lb.ft.
• Hardened, tempered and finished in
polished high chrome. • Wrenches are individually tested to standards with ±4%
deep polished high chrome.
• Twist reverse and quick release. accuracy and each wrench is issued with an individually
• Features quick socket release and contoured
• Contoured handle for added grip, extends up to 1000mm. numbered test certificate.
handle for added grip which extends up to 1000mm.
• Model No. AK6693 • Model No. STW102
• Model No. AK7317
• List Price £99.95 • List Price £79.95
• List Price £89.95
Xmas Price Xmas Price Xmas Price
£59.95 exc
VAT
SAVE 700/1000mm
£64.95 exc
VAT
SAVE 700/1000mm
£35.95 exc
VAT
SAVE
£70.44 inc
VAT 33% Length £76.32 inc
VAT 35% Length £42.24 inc
VAT 55%
10 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
2pc 12-in-1 Reversible Ratchet 3pc 4-in-1 Reversible Ratchet 6pc Reversible Double Ring
Spanner Set Spanner Set Ratchet Spanner Set
• High quality slim style
Chrome Vanadium
steel spanners. • High
• Innovative ring quality
design covers
Metric, Imperial and
NEW • High quality slim style
Chrome Vanadium
slim style
Chrome
female TRX-Star* allowing steel spanners. Vanadium
twelve different • Innovative ring design steel spanners.
sizes on one spanner. allows four different sizes • 72-Tooth
• 72-Tooth WallDrive® rings. on one spanner. WallDrive® rings.
• Size Coverage: Metric; 8-19mm, • 72-Tooth WallDrive® rings. • Contents: 8 x 9, 10 x 11,
Imperial; 5/16"-3/4", • Size Coverage: 8-19mm. 12 x 13, 14 x 15, 16 x 18,
Female TRX-Star*; E10-E24. 17 x 19mm.
NEW
• Model No. AK6388
• Model No. AK6387 • List Price £74.95 • Model No. AK63831
• List Price £53.95 • List Price £139.95
Xmas Price Xmas Price NEW Xmas Price
£27.95 exc
VAT
SAVE
£39.95 exc
VAT
SAVE
£74.95 exc
VAT
SAVE
£32.84 inc
VAT 48% £46.94 inc
VAT 47% £88.07 inc
VAT 46%
10pc Extra-Long Combination 12pc Twist Shank Combination 14pc Combination Spanner
Ratchet Spanner Set Spanner Set - Metric Set - Metric
• Manufactured from • Chrome Vanadium steel, heat treated
Metric Chrome and hardened for durability.
Vanadium • Unique WallDrive®
steel ring that
with a fully grips the
polished wall, not
mirror finish. the corners,
• High • Ergonomic giving up to
quality design maximizes 30% more torque.
slim style torque transfer • Fully polished
Chrome NEW to fixing using WallDrive® and unique twist shank. mirror finish for
Vanadium steel • 90° Rotation of shaft allows user to apply pressure on the corrosion resistance.
spanners.
• 72-Tooth • Contents: 10-19mm.
flat side of the handle rather than the edge.
• Model No. AK6309
• Sizes: 6-19mm.
• Model No. AK6320
FREE
WallDrive® rings. • Model No. AK63910 8pc Precision
• List Price £99.95 • List Price £64.95
• List Price £129.95 NEW Driver Folding Key Set
• Model No.
Xmas Price Xmas Price Xmas Price •
AK61311
List Price £11.95
£79.95 exc
VAT
SAVE
£49.95 exc
VAT
SAVE
£32.95 exc
VAT
SAVE
£93.94 inc
VAT 38% £58.69 inc
VAT 50% £38.72 inc
VAT 49%
6pc Extra-Long Double End 10pc 3/8"Sq Drive 8pc 1/2"Sq Drive
Ring Spanner Set - Metric Crow’s Foot Crow’s Foot
• Drop-forged
Chrome
Spanner Set Spanner Set
Molybdenum
steel spanners.
Metric Metric
• Hardened,
tempered and
chromed with fully
polished, mirror finish. • Manufactured from hardened and tempered Chrome
• 12 Point WallDrive® rings Vanadium steel.
with long slim shaft. • Chrome Vanadium steel jaws with 3/8" square drives
suitable for limited access applications. • Bi-hex jaws with 1/2"Sq drive, suitable for use with
• Sizes: 8x10, 11x13, 12x14, extension bars and ratchet wrenches.
13x15, 16x18, 17x19mm. • Heat treated and hardened with chrome finish.
• Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. • Contents: 20, 21, 22, 23, 24, 27, 30, 32mm.
• Supplied in storage tray. • Supplied in storage tray.
• Model No. AK6311 • Supplied on storage rail.
• Model No. AK598 • List Price £39.95 • Model No. AK5981
• List Price £99.95 • List Price £89.95
NEW
Xmas Price Xmas Price Xmas Price
£64.95 exc
VAT
SAVE
£23.95 exc
VAT
SAVE
£49.95 exc
VAT
SAVE
£76.32 inc
VAT 35% £28.14 inc
VAT 40% £58.69 inc
VAT 44%
2pc Magnetic Sharks Teeth NEW Magnetic Spanner Rack NEW Spanner Racks
Spanner Rack Capacity 12 Spanners NEW
• Magnetic spanner rack with
protective foam backing,
• Durable composite sharks teeth ideal for toolchests
spanner rack with magnetic strips, or any ferrous surface.
helps to maintain • Holds up to 05
an organised 12 spanners 04 WR
topchest/rollcab. SPACE for easy size WR
• Space saving two
piece 385mm
SAVING identification.
• Can also • Durable composite spanner rack helps maintain
& 425mm be wall
lengths, hold an organised workstation.
mounted. SAVE
up to 20 spanners. • Designed for easy size identification. UP TO
• Model No. WR03
• Model No. WR02 • Can also be hung on a wall or carried to the job. 40%
• List Price £13.95
• List Price £12.95
Model Capacity List Xmas Xmas
No. Price Price Price
Xmas Price Xmas Price Exc VAT Inc VAT
£7.45 exc
VAT
SAVE
£7.95 exc
VAT
SAVE
WR04 12 Spanners £7.95 £4.95 £5.82
£8.75 inc
VAT 42% £9.34 inc
VAT 43% WR05 15 Spanners £9.95 £5.95 £6.99
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 11
6pc Precision Screwdriver Set 7pc Precision Screwdriver Set 32pc Precision Extendable
• Lightweight quality driver shaft with
• High quality Chrome Molybdenum
contoured handle for added
Screwdriver Set
steel driver shafts. • High quality Chrome
• Nickel plated handle grip and control.
• Set features six Molybdenum
with soft rubber steel bits
grip for added double end
Chrome with satin
control.
• Spinner NEW Vanadium
screwdriver
finish.
• Contoured
top enables handle with
fingertip control. bits covering
twelve sizes. soft rubber
• Contents: grip and spinner
Phillips; #00, #0, #1, • Includes Slotted,
Phillips and top for fingertip
Slotted; 1.4, 2.0, control.
2.4mm. TRX-Star* bits.
• Suitable for a wide • Thirty 4mm hex bits
• Supplied in display case. for slotted, Phillips,
• Model No. AK97323 range of precision work
on electrical items such TRX-Star* and hex,
• List Price £12.95
as computers. plus extension bar. NEW
Xmas Price Xmas Price NEW Xmas Price • Model No. AK97322
£7.95 exc
VAT
SAVE
£12.95 exc
VAT
SAVE
• Model No. £11.95 exc
VAT
SAVE
• List Price £19.95
£9.34 inc
VAT 39% £15.22 inc
VAT 35% AK97321
• List Price £19.95
£14.04 inc
VAT 40%
6pc GripMAX® Screwdriver Set 8pc GripMAX® Screwdriver Set 600mm Hammer-Thru
• Extra strong Chrome
Molybdenum shafts
• Extra strong Chrome Molybdenum
shafts with satin finish. NEW Screwdriver NEW
with satin finish. • Shot blasted and magnetized tips. • Hardened and tempered
• Shot blasted and • Hexagonal profile design with ribbed Chrome Vanadium steel
magnetized tips. handle for maximum power extra long hexagonal
• Hexagonal transfer from hand to fixing. shaft with satin
profile design with • Impact resistant handles polished
ribbed grips for with hanging hole. finish.
maximum power • Contents: Phillips; • Contoured, textured handle
transfer from #1 x 80, #2 x 100mm, with hammer cap.
SAVE
hand to fixing. Pozi; #1 x 80, • Shot blasted and UP TO
• Impact resistant handles #2 x 100mm, blackened tip. 44%
with hanging hole. Slotted; 3 x 75, 4 x 80,
• Contents: Slotted; 3 x 75, Model Size List Xmas Xmas
5.5 x 100, 6.5 x 125mm
4 x 100, 5.5 x 125, 6.5 x 150mm, Philips; #1 x 80, #2 x 100mm. No. & Price Price Price
• Model No. AK4302
• Model No. AK4311 Description Exc VAT Inc VAT
• List Price £31.95
• List Price £28.95 AK49061 10mm Slotted £24.95 £13.95 £16.39
Xmas Price NEW Xmas Price £13.95 £16.39
AK49062 12mm Slotted £24.95
£15.95 exc
VAT
SAVE
£18.95 exc
VAT
SAVE
AK49063 Phillips #3 £21.95 £12.45 £14.63
£18.74 GripMAX £22.27 GripMAX
® ®
inc inc
VAT 45% VAT 41% AK49064 Phillips #4 £24.95 £13.95 £16.39
TRADE SCREWDRIVERS TRADE SCREWDRIVERS
7pc 14-in-1 Security TRX-Star*/Security 4pc Mini Circlip 4pc Circlip Pliers Set
TRX-TS* Screwdriver Set Pliers Set • Spring loaded jaw sets manufactured
from hardened and tempered steel.
• Seven 300mm double-end interchangeable bits,
• Internal and external,
one end security TRX-Star* the
• Internal and in both straight
other 5-sided security TRX-TS*.
external and bent
• Contents: T10H x TS10H,
pliers in configuration.
T15H x TS15H, T20H x TS20H,
straight • Pliers are
T25H x TS25H,
and bent fully
T27H x TS27H,
profiles. polished
T30H x TS30H,
• Spring loaded and fitted
T40H x TS40H,
action with with non-slip
Bit Driver.
non-slip PVC grips. polyfoam grips.
• Model
• Tip Diameter: 1mm. • Model No.
No.
• Suitable for 10-22mm circlips. AK8440
AK4928
• List Price £38.95
• Model No. AK8449 • List Price FREE
NEW • List Price £14.95 £31.95 16-in-1 Stubby Precision
Extendable Ratchet Screwdriver
• Model No. AK97316
Xmas Price Xmas Price Xmas Price • List Price £13.45
£20.95 exc
VAT
SAVE
£8.95 exc
VAT
SAVE
£17.95 exc
VAT
SAVE
£24.62 inc
VAT 46% £10.52 inc
VAT 40% £21.09 inc
VAT 44%
0-150mm/0-6" Digital 40pc Mechanic’s Tap & Die Set 45pc Professional
Vernier Calliper Split Dies - Metric Tap & Die Set
• 11mm LCD display.
• Hardened and tempered stainless steel • Professional split dies Split Dies
with machined
with satin finish.
• Metric and Imperial readings with lead-ins for Metric
conversion between the two. ease • Complete range
• Zero setting control of use. of Metric taps and
for comparative • Includes dies, up to 24mm.
measurement. T-handled • Includes Tap Wrench,
• Model No. tap wrench T-Bar Tap Wrench and
AK962EV and Metric Steel Die Wrench.
• List screw pitch • Model No. AK303
Price gauge. • List Price £129.95
• Sizes: 3-12mm.
£59.95
FREE • Model No. AK3040 SAVE
16-in-1 Stubby Precision • List Price £74.95 46%
Ratchet Screwdriver
• Model No. AK97315
Xmas Price • List Price £9.95 Xmas Price Xmas Price FREE
£29.95 exc
VAT
SAVE
£39.95 exc
VAT
SAVE
£69.95 exc
VAT
LED Penlight
Torch 2 x AAA
£35.19 inc
VAT 50% £46.94 inc
VAT 47% £82.19 inc
VAT
•
•
Model No. AK6507
List Price £19.95
12 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Extendable Prybar Extendable Prybar Extendable Prybar with
580-810mm 890-1340mm Adjustable Head
600-915mm
• Heavy-duty hardened and tempered Chrome
• Heavy-duty hardened and tempered Chrome Vanadium • Heavy-duty hardened and tempered Chrome Vanadium Vanadium steel extendable prybar with blackened finish.
steel with blackened finish. steel with blackened finish. • Quick release locking mechanism retains extension
• Quick release locking mechanism retains extension at set • Quick release locking mechanism retains extension at set at set increments giving twenty seven different
increments giving twenty different shaft lengths from increments giving twenty eight different shaft lengths shaft lengths from 600-915mm.
580-810mm. from 890-1340mm. • Features 180° adjustable foot, simply push button to
• Ideal for general force and alignment work. • Ideal for commercial and agricultural use. adjust then release to lock into position.
• Model No. AK9136 • Model No. AK9137 • Model No. AK9138
• List Price £42.95 NEW • List Price £99.95 NEW • List Price £57.95 NEW
Xmas Price Xmas Price Xmas Price
£27.95 exc
VAT
SAVE
£64.95 exc
VAT
SAVE
£37.95 exc
VAT
SAVE
£32.84 inc
VAT 35% £76.32 inc
VAT 35% £44.59 inc
VAT 35%
4pc Prybar Set 150mm Mini Hacksaw 300mm Professional
with Adjustable Hacksaw
Blade Adjustable
• Composite frame
and handle with
Blade
comfortable
rubberised grip.
• Multi angle NEW
• Heavy-duty, angled shafts. adjustment for
• Chrome Molybdenum steel with blackened finish. fast and
• Textured comfort grip handles with hammer cap. accurate
• Composite handle with comfortable rubberised grip.
• Contents: 200, 300, 460, 610mm. cutting.
• Lightweight metal frame with integral blade storage facility.
• Model No. AK9105 • Supplied with high carbon steel blade suitable for
• Multi-angle adjustment for fast and accurate cutting.
• List Price £39.95 cutting a variety of materials.
• Supplied with high carbon steel blade suitable for cutting a
• Model No. AK8683
variety of materials.
• List Price £10.95
• Model No. AK8684
Xmas Price Xmas Price Xmas Price • List Price £19.95
NEW
£22.95 exc
VAT
SAVE
£6.95 exc
VAT
SAVE
£11.95 exc
VAT
SAVE
£26.97 inc
VAT 43% £8.17 inc
VAT 37% £14.04 inc
VAT 40%
Brass Face 500g Machinist 3pc Fibreglass
Dead Blow Hammer Shaft
Hammers Ball Pein
Hammer
NEW NEW Set
• Professional engineer’s set.
• Brass faced shot-loaded head produces non sparking, • High quality forged steel hammer head with blackened finish. • Contents: 340g(12oz), 450g(1lb), 680g(1.5lb).
controlled and effective blows without rebound. SAVE • Highly polished face with rounded edges. • High quality drop-forged steel heads.
• Features comfortable rubber grip. UP TO • Curved hardwood handle with painted finish. • Fitted with fibreglass shafts.
45% • Model No. MCH500 • Model No. AK2031
• List Price £7.95
NEW
Model No. Weight List Xmas Xmas • List Price £37.95
Price Price Price
Exc VAT Inc VAT Xmas Price Xmas Price
BFH12 12oz £17.95 £9.95 £11.69 £4.95 exc
VAT
SAVE
£22.95 exc
VAT
SAVE
BFH24 1.5lb £26.95 £15.95 £18.74 £5.82 inc
VAT 38% £26.97 inc
VAT 40%
Copper/Rawhide Faced Copper Faced Hammers 25pc Punch & Chisel Set
Hammers with with Hickory
Hickory Shafts
Shafts
NEW NEW
• Malleable iron head fitted with one face
of pure electrolytic copper and one face • Malleable iron head of extra heavy construction
SAVE SAVE
of compressed buffalo hide. fitted with two pure electrolytic copper faces. UP TO
• Replacement faces available. 31% • Replacement copper faces available. 33% • Made from Chrome Vanadium steel.
• Hardened, tempered and supplied in tool roll.
Model No. Weight List Xmas Xmas Model No. Weight List Xmas Xmas • Model No. AK9298
Price Price Price Price Price Price • List Price £84.95
Exc VAT Inc VAT Exc VAT Inc VAT
CRF15 1.5lb £27.45 £18.95 £22.27 CFH02 1.75lb £26.95 £17.95 £21.09 Xmas Price
CRF25 2.25lb £34.95 £23.95 £28.14 CFH03 2.75lb £36.95 £24.95 £29.32 £42.95 exc
VAT
SAVE
CRF35 3.5lb £47.95 £32.95 £38.72 CFH04 4.3lb £47.95 £32.95 £38.72 £50.47 inc
VAT 49%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 13
Generation Series Generation Series Reversible Generation Series
Air Cut-Off Tool Air Drill with Keyless Chuck Air Ratchet Wrench Kits
• 0.6hp • Fully polished finish with exhaust • Softgrip handle for comfort
Air motor through handle base for and control.
with 360° reduced noise emission. • Adjustable exhaust
adjustable • Unit features encaged outlet for
disc guard. twin gear drive control on
• 4-Position assembly. exhaust
air regulator. • Rotor runs
• Throttle safety device direction.
• Rotating, on high
prevents accidental • Integral air
adjustable quality
operation. regulator with
exhaust outlet. ball bearings four-speed control.
• Soft grip handle • Ideal for cutting exhaust brackets. for long life and reliability. • Supplied with
for comfort. • Supplied with Ø75mm cutting disc. • Free Speed: 2200rpm, impact sockets, SAVE
SAVE
•
•
Model No. GSA25
List Price £69.95
Operating Pressure: 90psi. FREE extension bars and driver bits. 58%
• Model No. GSA241
54% 21pc Titanium Coated Drill Bit Set
• List Price £94.95 Metric Model No. Drive List Xmas Xmas
Xmas Price FREE Xmas Price
•
•
Model No. AK473M
List Price £33.95
Price Price
Exc VAT
Price
Inc VAT
15 x Cutting Discs
£31.95 exc
VAT
• Model No. PTC/3C
£52.95 exc
VAT
SAVE
GSA20KIT 3/8"Sq £94.95 £39.95 £46.94
£37.54 inc
VAT
• Total List Price £36.75
£62.22 inc
VAT 44% GSA21KIT 1/2"Sq £94.95 £39.95 £46.94
13pc Generation Series Air Needle Scaler 14pc Air Blow
Air Die Grinder Kit Pistol Type Gun Kit
• Soft handle grip for comfort
and control.
• Adjustable exhaust
outlet for control
on exhaust
direction. NEW
• Trigger
with safety
catch to • Pistol type scaler suitable for cleaning
heavy paint and rust scale from metal surfaces. • Trigger operated blow gun with interchangeable
prevent
• Removable needle head allows use as a standard air nozzles and lances.
accidental operation.
hammer but requires additional chisel set and spring • Fitted with brass air inlet ferrule.
• Supplied with air
regulator for retainer (not included). • Ideal for use in the workshop or bodyshop.
four-speed control. • Features variable speed control and rubber grip for added • Maximum operating Pressure: 110psi.
• Model No. GSA67 comfort. • Model No. SA921
• List Price £72.95 • Spare needle sets are • List Price £24.95
readily available.
Xmas Price Xmas Price • Model No. SA50 Xmas Price
£31.95 £49.95 £14.95
exc exc • List Price £99.95 exc
VAT VAT VAT
SAVE SAVE SAVE
£37.54 inc
VAT 56% £58.69 inc
VAT 50% £17.57 inc
VAT 40%
Reciprocating Mini Air Reciprocating Air Saw Air Belt Sander 10 x 330mm
Saw/Needle File •
•
Suitable for a variety of bodyshop applications.
Well balanced and smooth running tool.
• Aluminium housing with articulated sanding arm.
• Features belt tracking control, heavy-duty nose roller
• Fitted with safety-trigger device. and one-handed trigger operation.
• Air Supply: 90psi - 6cfm. • Suitable for sanding otherwise inaccessible
• Model No. SA34 areas such as
• List Price £109.95 around door-shuts.
• Model No. SA35
• List Price
£149.95
NEW
• Suitable for a variety of bodyshop applications particularly
where space is limited.
• Use as a cutting saw for panels or a file for de-burring and FREE FREE
shaping metalwork. 24tpi Air Saw Blade - Pack of 5 Sanding Belt 60Grit 10 x 330mm
• Fitted with safety trigger • Model No. SA34/B24 Pack of 5
device. • List Price
Xmas Price • Supplied with a starter Xmas Price £10.45
Xmas Price •
•
Model No. SA35/B60G
List Price £8.45
£99.95 £59.95 £69.95
exc pack of blades and files. exc exc
VAT VAT VAT
SAVE SAVE SAVE
£117.44 inc
VAT 33% • Model No. SA347
• List Price £149.95
£70.44 inc
VAT 45% £82.19 inc
VAT 53%
Ø150mm Dust-Free 220 x 112mm Dust-Free
NEW
Air Random Air Sander Random Orbital
NEW MAT150AS
Orbital Sanders • Quality components and
• Quality components and precision assembly precision assembly
techniques prolong the tool's life and give techniques prolong
a smooth, low vibration performance. the tool's life and
• Internal motor features spring loaded give a smooth,
vanes allowing the tool to run more low vibration
efficiently using less air. performance.
• High quality dual action sander • Internal motor features
designed for the professional spring loaded vanes
bodyshop and garage. allowing the tool to
• Free Speed: 3500 - 10000rpm. SAVE run more efficiently
UP TO
using less air.
MAT150SC 36%
Model No. Self-Contained List Xmas Price Xmas Price
Price Exc VAT Inc VAT • High quality dual action sander designed for
Xmas Price the professional bodyshop and garage.
MAT150AS £219.95 £139.95 £164.44 £169.95 exc
VAT
SAVE
• Suitable for use with dust-free vacuums.
• Free Speed: 3500-10000rpm.
MAT150SC £229.95 £149.95 £176.19 £199.69 inc
VAT 38%
• Model No. MAT110AS
• List Price £274.95
14 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
1/2"Sq Drive Air Impact Wrench 1/2"Sq Drive Air Impact 1/2"Sq Drive Air Impact
• Working/Maximum Torque: 230/270lb.ft. Wrench - Pin Clutch Wrench - Twin Hammer
• Ultimate Torque: 420lb.ft. • Working/Maximum Torque: • Working/Maximum Torque:
• Tough professional air impact gun 400/500lb.ft. 400/460lb.ft.
with fully polished alloy • Ultimate Torque: 550lb.ft. • Ultimate Torque: 500lb.ft.
housing and • Fitted with • Powerful impact
rubber bumper. reliable low wrench with
• Through type vibration high torque
forward/reverse pin-clutch twin hammer
control. mechanism. mechanism.
• 4-Position adjustable • Handle exhaust reduces noise output • Handle
air/torque selection. and limits the circulation of brake dust on NEW exhaust reduces noise output and limits the NEW
• Air supply: wheel applications. circulation of brake dust
90psi/4cfm. • Model No.
SAVE FREE on wheel applications.
FREE
• Model No. SA2
• List Price £69.95
FREE GSA03
• List Price 21% 10pc 1/2"Sq Drive Impact
• Model No.
SA6021
SAVE
38%
10pc 1/2"Sq Drive Impact
Socket Set - Metric
10pc 1/2"Sq Drive Impact Socket Set - Metric
£119.95 • Model No. AK56/11M • List Price £159.95 • Model No. AK56/11M
Socket Set - Metric • List Price £21.95
• List Price £21.95
• Model No. AK56/11M
Xmas Price • List Price £21.95 Xmas Price Xmas Price
£37.95 exc
VAT
SAVE
£94.95 exc
VAT
5mtr x Ø8mm Air Hose
with 1/4"BSP Unions £99.95 exc
VAT
5mtr x Ø8mm Air Hose
with 1/4"BSP Unions
£44.59 inc
£111.57 inc
£117.44 inc
• Model No. AHC5 • Model No. AHC5
VAT 46% VAT • List Price £11.95 VAT • List Price £11.95
1/2"Sq Drive Air Impact 3/4"Sq Drive Air Impact 1"Sq Drive Air Impact Wrench
Wrench - Twin Hammer Wrench - Pin Clutch Straight Long Anvil
• Working/Maximum • Working/Maximum Torque: • Working/Maximum Torque: 1170/1460lb.ft.
Torque: 725/825lb.ft. 980/1150lb.ft. • Ultimate Torque: 1520lb.ft.
• Ultimate Torque: 1000lb.ft. • Ultimate Torque: • Long anvil and straight configuration
• Suitable for jobs that 1175lb.ft. with rocking-dog hammer for
would normally require • Pin clutch applications with
a 3/4" impact wrench. design gives restricted access.
• Features twist smooth and
control at back reliable performance.
of tool for simple choice • Four-position twist
of speed and direction. dial located at back of unit.
• Composite casing with • Soft grip handle to help
SAVE
soft grip helps reduce
FREE reduce the effects of chill • Model No. 43% FREE
vibration and chill. SAVE
• Model No. SA6002 30% 13pc 1/2"Sq Drive Impact
and vibration.
• Model No. SA6
FREE SA29/S
• List Price
Mechanic’s Gloves
Socket Set - Metric Mechanic’s Gloves Padded Anti-Collision
• List Price £229.95 • Model No. AK5613M • List Price £289.95 £459.95 Extra Large
Palm - Extra Large
• List Price £26.95 • Model No. MG802XL
• Model No. MG799XL
Xmas Price Xmas Price • List Price £19.95
Xmas Price • List Price £51.95
£159.95 exc
VAT
5mtr x Ø8mm Air Hose
with 1/4"BSP Unions £184.95 exc
VAT
SAVE
£259.95 exc
VAT
8pc 1"Sq Drive Deep Impact
Socket Set - Metric
£187.94 inc
£217.32 inc
£305.44 inc
• Model No. AHC5 • Model No. AK888M
VAT • List Price £11.95 VAT 36% VAT • List Price £109.95
Inline Air Workshop Mini Magnetic Z-Swivel Air Hose Connector
Blow Gun Air Filter/ Impact with Regulator
NEW Regulator/ Tool Tidy 1/4"BSP
Lubricator
• Max. Pressure: 150psi. • Model No. • Model No.
• Max. Airflow*: 28cfm. MMIT SA900
• Model No. *Supply Pressure of 100psi. • List Price • List Price
SA905 • Model No. SA2001 £16.95 £16.45
• List Price £7.95 • List Price £49.95
Xmas Price Xmas Price Xmas Price Xmas Price
£4.95 exc
VAT
SAVE
£29.95 exc
VAT
SAVE
£9.95 exc
VAT
SAVE
£9.95 exc
VAT
SAVE
£5.82 inc
VAT 38% £35.19 inc
VAT 40% £11.69 inc
VAT 41% £11.69 inc
VAT 40%
Heavy-Duty Air Retractable Air Hoses Metal Reel Auto Rewind Control Air Hose
Hoses with Ø10mm ID Rubber Hose Reels Ø10mm ID
1/4"BSP Unions Rubber Hose
• Manufactured to EN 2398. • Controlled,
• Rubber alloy air hose slow
suitable for garage rewind
which,
NEW
or bodyshop SAVE
applications. UP TO unlike
38% traditional
retractable reels,
Model No. Length List Xmas Xmas returns the air hose
x Price Price Price at a safe speed.
Bore Exc VAT Inc VAT • Hose can be extended
AH5RX 5mtr x Ø8mm £12.45 £8.95 £10.52 and positioned at any length.
• Heavy-duty • Auto layering mechanism
AH10RX 10mtr x Ø8mm £21.95 £14.95 £17.57 steel construction distributes air hose evenly SAVE
UP TO
with corrosion resistant powder coated finish. on hose drum preventing jamming.
AH15RX 15mtr x Ø8mm £31.45 £21.95 £25.79 SAVE 35%
• 9-Position guide arm with four non-snag rollers. UP TO
AH20RX 20mtr x Ø8mm £40.95 £27.95 £32.84 • Multi position ratchet lock. 38% Model No. Hose List Xmas Xmas
Length Price Price Price
AH30RX 30mtr x Ø8mm £59.95 £36.95 £43.42 Model No. Hose List Xmas Xmas Exc VAT Inc VAT
AH5RX/38 5mtr x Ø10mm £14.95 £10.95 £12.87 Length Price Price Price
Exc VAT Inc VAT SA821 10mtr £107.45 £69.95 £82.19
AH10RX/38 10mtr x Ø10mm £24.95 £17.95 £21.09
SA84 8mtr £107.45 £74.95 £88.07 SA822 15mtr £144.95 £96.95 £113.92
AH15RX/38 15mtr x Ø10mm £34.95 £24.95 £29.32
AH20RX/38 20mtr x Ø10mm £44.95 £32.95 £38.72 SA841 15mtr £159.95 £99.95 £117.44 SA823 20mtr £174.95 £114.95 £135.07
AH30RX/38 30mtr x Ø10mm £64.95 £41.95 £49.29 SA85 20mtr £199.95 £134.95 £158.57 SA824 30mtr £219.95 £149.95 £176.19
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 15
1.5hp Oil Free Direct Drive NEW 1.5hp Oil Free Direct Drive NEW 24ltr Direct Drive Compressor 1.5hp
Compressor Compressor 6ltr
without Tank • Air Displacement:
6.35cfm.
• Maximum Free • Air Displacement:
Air Delivery: 6cfm.
4.70cfm. • Maximum Free
• Maximum Air Delivery:
Pressure: 4.2cfm.
116psi/8bar. • Aluminium
• Ideal for use cylinder head
where an oil-free with cast iron
air delivery is cylinder gives
required and added
especially suited resistance
to small low pressure, to wear.
• Air Displacement: 6.35cfm. touch-up and air brush
• Maximum Free Air Delivery: 4.70cfm. • Pump head
spraying applications. directly coupled
• Maximum Pressure: 116psi/8bar. • Simple construction with fewer
• Ideal for use where an oil-free air delivery is required and to heavy-duty induction motor
components makes this unit practically maintenance-free. for reliable and quiet operation.
especially suited to small low pressure, touch-up and air • Reduced weight gives greater portability and can be
brush spraying applications. • Welded tank complies with latest safety requirements.
transported and even operated on its side. • Fitted with fully automatic pressure cut-out switch and twin
• Simple construction with fewer components makes this • Precision welded receiver tank manufactured to meet
unit practically maintenance-free. gauges displaying tank and working pressures.
Pressure Vessel Directive 87/404/EEC. • Model No. SA2415
• Reduced weight gives greater portability and can be • Fitted with fully automatic pressure cut-out switch and air
transported and even • List Price £249.95
regulator with gauge.
operated on its side. • Model No. SAC00615
Xmas Price • Model No. SAC00015 Xmas Price • List Price £199.95 Xmas Price
£89.95 £119.95 £139.95
exc • List Price £149.95 exc exc
VAT VAT VAT
SAVE SAVE SAVE
£105.69 inc
VAT 40% £140.94 inc
VAT 40% £164.44 inc
VAT 44%
NEW
1.5hp Oil Free 50ltr Oil Free Belt Drive Compressor 50ltr Direct
Direct Drive 2.0hp Drive
Compressor • Air Displacement: 7.3cfm.
• Maximum Free Air Delivery:
Compressor
24ltr 5.1cfm.
• Aluminium cylinder with
2.0hp
• Air Displacement: cast iron lining gives reduced
6.35cfm. weight and improved resistance
• Maximum Free to wear. • Air
Air Delivery: • Suitable for general purpose Displacement:
4.70cfm. workshop applications. 7cfm.
• Maximum Pressure: • Oil free, single piston pump • Maximum Free
116psi/8bar. is belt driven by a 2.0hp motor Air Delivery:
• Ideal for use where and fixed to a vertical type tank, 4.8cfm.
an oil-free air delivery is required saving space around the • Aluminium
and especially suited to small low pressure, workshop. head with cast iron
touch-up and air brush spraying applications. • Precision welded receiver tank cylinder gives added resistance to wear.
• Simple construction with fewer components manufactured to meet Pressure • Suitable for general purpose workshop applications.
makes this unit practically maintenance-free. Vessel Directive 87/404/EEC. • Pump head directly coupled to heavy-duty
• Precision welded receiver tank manufactured • Fitted with fully automatic induction motor for reliable and quiet operation.
to meet Pressure Vessel Directive 87/404/EEC. pressure cut-out switch and • Welded tank complies with latest European standards.
• Fitted with fully automatic pressure cut-out switch air regulator with gauge. • Fitted with fully automatic pressure cut-out switch and
and air regulator with • Model No. SAC05020 twin gauges displaying tank and working pressures.
gauge.
• Model No. SAC02415
FREE • List Price
£299.95 SAVE
• Fitted with ASTA/BS approved non-rewirable plug.
• Model No. SA5020 SAVE
5pc Air
• List Price £239.95 Accessory Kit 38% • List Price £319.95 38%
Xmas Price
•
•
Model No.
SA33/S
List Price Xmas Price FREE Xmas Price FREE
£49.95 5pc Air
£159.95 £199.95
Air Tool Kit
exc
VAT
SAVE
£184.95 exc
VAT
Accessory Kit
• Model No.
exc
VAT • Model No.
AIRKIT2
£187.94 £217.32 £234.94
SA33/S
inc inc inc • List Price
VAT 33% VAT
• List Price
£49.95 VAT £145.20
50ltr Direct Drive 100ltr Direct Drive
Compressor 3.0hp Compressor 3.0hp
• Air Displacement:12.6cfm. • Air Displacement: 12.6cfm.
• Maximum Free Air Delivery: • Maximum Free Air Delivery:
8.75cfm. 8.75cfm.
• Maximum Pressure: • Maximum Pressure:
130psi/9bar. 130psi/9bar.
• V-Twin pump with • V-Twin pump
aluminium cylinders with aluminium
and cast iron cylinders and
liners for reduced cast iron
weight and improved liners for
resistance to wear. reduced weight
• Pump directly and improved
coupled to resistance
heavy-duty to wear.
induction motor • Suitable for
for reliable general purpose
and quiet operation. workshop
• Precision welded receiver applications.
tank manufactured to meet • Pump directly
Pressure Vessel Directive 87/404/EEC. coupled to • Precision welded receiver tank
• Fitted with fully automatic pressure cut-out switch, air heavy-duty induction manufactured to meet Pressure
regulator and pressure gauges for tank and supply. motor for reliable and Vessel Directive 87/404/EEC.
• Model No. SAC05030 quiet operation. • Model No. SAC10030
• List Price £499.95 • List Price £629.95
Xmas Price SAVE
FREE Xmas Price SAVE
FREE
Air Tool Kit Air Tool Kit
£269.95 exc
VAT
46% • Model No.
AIRKIT2
£399.95 exc
VAT
37% • Model No.
AIRKIT1
£317.19 inc
VAT
• List Price
£145.20 £469.94 inc
VAT
• List Price
£247.20
16 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
100ltr Belt Drive Compressor 150ltr Belt Drive Compressor
with Alloy Cylinders 3.0hp with Alloy Cylinders 3.0hp
• Air Displacement: 14.0cfm.
• Air Displacement: 13.6cfm.
• Maximum Free Air Delivery: 10.6cfm.
• Maximum Free Air Delivery: 9.9cfm.
• Maximum Pressure:
• Maximum Pressure: 145psi/10bar.
145psi/10bar.
• Suitable for professional
• Suitable for professional
garage, bodyshop and
garage, bodyshop and
industrial applications.
industrial applications.
• Features reduced power
• Features reduced
surge on start-up and allow
power surge on
units to be powered by
start-up which
13Amp supply.
allows unit to be
• Composite drive guard
powered by
is designed to draw
13Amp supply.
increased levels of
• Composite drive
cooling air over cylinder
guard is designed to
head and lowers running
draw increased levels of
temperature by 20%.
cooling air over cylinder
• Model No. SA1010/3
head and lowers running temperature by 20%.
• List Price £929.95
• Model No. SA1015/3
• List Price £999.95
FREE FREE
Air Tool Kit Air Tool Kit
Xmas Price Xmas Price
£579.95 exc
VAT
SAVE • Model No.
£599.95 exc
VAT
SAVE • Model No.
£681.44 inc
VAT 38% •
AIRKIT1
List Price £247.20 £704.94 inc
VAT 40% •
AIRKIT1
List Price £247.20
200ltr Belt Drive Compressor 270ltr Belt Drive Compressor
with Alloy Cylinders 3.0hp 2-Stage Cylinder 7.5hp 3ph
• Air Displacement: 14.0cfm. • Air Displacement: 31.0cfm.
• Maximum Free Air Delivery: 10.6cfm. • Maximum Free Air Delivery: 25.0cfm.
• Maximum Pressure: • Maximum Pressure:
145psi/10bar. 160psi/11bar.
• Suitable for professional • Premier Line heavy-duty
garage, bodyshop and compressor suitable
industrial applications. for garage, bodyshop
• Features reduced and industrial
power surge on applications.
start-up which • 270ltr Unit with
allows units to be 7.5hp motor for
powered by use in larger
13Amp supply. workshops or
• Composite drive where more
guard is designed to capacity
draw increased levels of is required
cooling air over cylinder to power high
head and lowers running temperature by 20%. volume or multiple
• Model No. SA1020/3 air applications.
• List Price £1149.95 • Heavy-duty 3-phase
electric motor and cast
FREE iron cylinders to enable slower revving giving a longer life
Air Tool Kit and higher performance.
• Includes 2-stage compressor head with
intercooler unit for maximum efficiency.
Xmas Price Xmas Price • Model No. SA3027/75
• List Price £2299.95
£679.95 exc
VAT
SAVE • Model No.
£1299.95 exc
VAT
SAVE
£798.94 inc
VAT 41% •
AIRKIT1
List Price £247.20 £1527.44 inc
VAT 43%
50ltr Belt Drive Compressor NEW 50ltr Belt Drive Compressor NEW
with Petrol Engine 4.0hp with Petrol Engine 5.5hp
• Air Displacement: 10.2cfm. • Air Displacement: 13cfm.
• Maximum Free • Maximum Free
Air Delivery: 7.7cfm. Air Delivery: 8.6cfm.
• Maximum • Maximum
Pressure: Pressure:
145psi/10bar. 145psi/10bar.
• Fully mobile • Fully mobile
compressor compressor
with Honda with Honda
GC135 4hp GX160 5.5hp
power unit power unit
coupled to coupled to
heavy-duty, heavy-duty,
twin piston, twin piston,
cast iron pump. cast iron pump.
• Fitted heavy-duty • Fitted heavy-duty
rubber transport rubber transport
wheels and protected wheels and protected
by 360° roll cage. by 360° roll cage.
• Features twin gauges • Features twin gauges
and air outlet regulator. and air outlet regulator.
• Runs on unleaded fuel. • Runs on unleaded fuel.
• Model No. SA5040 POWERED by • Model No. SA5055 POWERED by
Xmas Price • List Price £1699.95 Xmas Price • List Price £1999.95
£999.95 exc
VAT
SAVE
£1199.95 exc
VAT
SAVE
£1174.94 inc
VAT 41% £1409.94 inc
VAT 40%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 17
19pc Titanium Coated Drill Bit Set 19pc Cobalt Drill Bit Set 25pc Cobalt Drill Bit Set
Metric Metric Metric
• Sizes: 1.0-10.0mm • High speed steel with 5% Cobalt makes • High speed steel with 5% Cobalt makes
in 0.5mm increments. these ideal for drilling extra hard materials. these ideal for drilling extra hard materials.
• Quicker swarf clearance • Split tip enables bits to bite workpiece • Split tip enables bits to bite workpiece
from the drill’s cutting quickly reducing the need quickly reducing the need for centre mark.
edge produces for centre mark. • Drills can be re-sharpened
a superior quality • Drills can be re-sharpened without without affecting their performance.
of finish compared affecting their performance. • Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4,
to normal HSS drills. • Contents: 1, 1.5, 2, 2.5, 3, 3.5, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5,
• Ideal for use on 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 9.5, 10, 10.5, 11, 11.5, 12,
stainless steel, 8.5, 9, 9.5, 10mm. 12.5, 13mm.
copper and • Model No. AK4701 • Model No. AK4702
high carbon steels. • List Price £59.95 • List Price £99.95
• Model No. AK4719
• List Price £39.95
FREE FREE
6pc Driver
Folding Key Set LED Penlight
• Model No. Torch 2 x AAA
Xmas Price Xmas Price •
AK61312
List Price £11.95
Xmas Price •
•
Model No. AK6507
List Price £19.95
£19.95 exc
VAT
SAVE
£35.95 exc
VAT
SAVE
£54.95 exc
VAT
SAVE
£23.44 inc
VAT 50% £42.24 inc
VAT 40% £64.57 inc
VAT 45%
150mm Bench Grinder 150W/230V 150mm Bench Grinder with 200mm Workshop Bench Grinder
Wire Wheel 370W/230V 560W/230V
• Induction
motor
drive,
suitable
for general • 560Watt/
use. 230Volt
• No Load Speed: High power
2850rpm. induction motor.
SAVE • 150W/230V, 2950rpm. • Fully CE approved and ready • Suitable for general grinding and sharpening operations.
40% • Ready to use. to use.
• Supplied with one coarse
• Supplied with one coarse and one fine wheel.
• Suitable for general • Supplied with toolrests
stone, one wire brush and eyeshields.
workshop use.
Xmas Price • Supplied with one coarse Xmas Price wheel and adjustable
eyeshields.
Xmas Price • Model No. BG200XL
£29.95 £64.95 £84.95
exc and one fine wheel. exc exc • List Price £119.95
VAT • Fitted with eye shields. VAT VAT
• Model No.
SAVE SAVE
£35.19 inc
VAT
• Model No. BG150CX
• List Price £49.95 £76.32 inc
VAT 28% BG150XLW/98
• List Price £89.95
£99.82 inc
VAT 29%
125mm Vice Multi-Angle Quick Action All Steel Vices Heavy-Duty Professional
• Bench mounting, Fixed Base Vices
• Bench mounting, all steel • Super quality
heavy-duty vice heavy-duty cast iron
with cast iron body. vice with construction.
• 360° rotating/ serrated • Replaceable
locking jaws jaws. steel jaws.
enable • Features • Includes
workpiece patented an anvil.
to be positioned cam action • 2 Year
at all angles. lock/release system SAVE
guarantee UP TO
• Smooth rolled thread and quick-slide action for fast jaw opening and 33%
SAVE against breakage.
for accurate clamping. closing before clamping. UP TO
• Includes an integral anvil. • Includes anvil. 25% Model No. Jaw List Xmas Xmas
• V-Jaw especially designed for securing Opening Price Price Price
pipe work up to Ø71mm. Model No. Jaw Size List Xmas Xmas Exc VAT Inc VAT
• Guaranteed for two x Jaw Price Price Price
Opening Exc VAT Inc VAT CV100XT 100mm £54.95 £39.95 £46.94
years against breakage.
Xmas Price • 120mm Jaw opening. SQAV100 100 x 100mm £69.95 £54.95 £64.57 CV125XT 125mm £74.95 £54.95 £64.57
£54.95 exc
VAT
SAVE
• Model No.
CV125MAV SQAV150 150 x 150mm £119.95 £89.95 £105.69 CV150XT 150mm £109.95 £75.95 £89.24
£64.57 inc
VAT 45% • List Price
£99.95
SQAV200 200 x 198mm £149.95 £114.95 £135.07 CV200XT 200mm £179.95 £119.95 £140.94
355mm Portable Abrasive 250/125mm Wet & Dry
Disc Cut-Off Saw 230V Bench Grinder 230V
• General purpose abrasive • Manufactured to comply with the
saw suitable for site use. CE and Supply of Machinery
• Supplied with abrasive disc (Safety) regulations SI 1992/3073.
suitable for metal-cutting • Supplied with 230Volt induction
but will cut concrete with motor and fully guarded and
correct blade fitted. suitable for workshop use.
• Trigger operated, 2200W • Supplied with a set of abrasive
motor and hardened gears give wheels, ready for use.
smooth transmission of power. • Model No. SM52
• Model No. MG314/230V • List Price £299.95
• List Price £239.95
Xmas Price Xmas Price
£139.95 exc
VAT
SAVE
£179.95 exc
VAT
SAVE
£164.44 inc
VAT 42% £211.44 inc
VAT 40%
18 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
5-Speed Hobby Pillar Drill 12-Speed Bench Pillar Drill 12-Speed Floor Pillar Drill
583mm Ht 330W/230V 840mm Ht 370W/230V 1530mm Ht 370W/230V
• 13mm (1/2") Capacity chuck.
• Fitted with no-volt safety switch. • 16mm (5/8") Capacity chuck, MT2. • 16mm (5/8") Capacity chuck, MT2.
• Height: 583mm. • Fitted with no-load voltage switch • Fitted with no-load voltage switch
• Chuck to Upright: 105mm. and locking cover to prevent and locking cover to prevent
• Motor Power: accidental starting. accidental starting.
170Watt, • Height: 840mm. • Height: 1530mm.
Input Power: • Chuck to Upright: 127mm. • Chuck to Upright: 127mm.
330Watt. • Motor Power: 220Watt, • Motor Power: 220Watt,
• Column Input Power: 370Watt. Input Power: 370Watt.
Diameter: 46mm. • Column Diameter: 60mm. • Column Diameter: 60mm.
• Spindle Travel: • Spindle Travel: 60mm. • Spindle Travel: 60mm.
50mm. • Weight: 37kg. • Weight: 53kg.
• Weight: 18kg. • Model No. GDM92B • Model No. GDM140F
• Model No. SDM30 • List Price £269.95 • List Price £319.95
• List Price £114.95
Xmas Price Xmas Price Xmas Price
£69.95 exc
VAT
SAVE
£174.95 exc
VAT
SAVE
£199.95 exc
VAT
SAVE
£82.19 inc
VAT 39% £205.57 inc
VAT 35%
26% £234.94 inc
VAT 38%
16-Speed Floor Pillar Drill 12-Speed Premier Floor Pillar Drill
1630mm Ht 650W/230V 1710mm Ht 230V
• 16mm (5/8") Capacity chuck No. 2MT. • 20mm (3/4") Capacity chuck, MT4.
• Fitted with no-load voltage switch and • Fitted with no-load voltage switch and
locking cover to prevent accidental locking cover to prevent accidental starting.
starting. • Integral work light.
• Height: 1630mm. • Height: 1710mm.
• Chuck to Upright: 178mm. • Chuck to Upright: 260mm.
• Motor Power: 450Watt, • Motor with aluminium housing for cool running.
Input Power: 650Watt. • Motor Power: 750Watt,
• Column Diameter: 80mm. Input Power: 925Watt.
• Spindle Travel: 80mm. • Column Diameter: 92mm.
• Weight: 74kg. • Spindle Travel: 120mm.
• Model No. GDM200F • Weight: 125kg.
• List Price £499.95 • Model No. PDM260F
• List Price £999.95
Xmas Price Xmas Price
£314.95 exc
VAT
SAVE
£529.95 exc
VAT
SAVE
£370.07 inc
VAT 37% £622.69 inc
VAT 47%
Metal Working Lathe 500mm Mini Drilling & Milling Machine
Between Centres • Bench mounting machine with the flexibility
to handle most materials.
• Quality workshop lathe • Features include a 350Watt motor, variable
suitable for a wide range speed drive, working table with T-slots to enable
of turning and drilling clamping of workpieces and Metric graduated
applications. compound scales.
• Features power feed for • Incorporates a tilting column which allows
even surface finish and drilling/milling of workpiece at ±45° from vertical.
thread cutting. • Supplied with 13mm chuck and accessory kit for
• Four-way tool post adjusting and setting.
mounted on compound • Complies with Safety of Machinery (Safety)
slide mechanism enables fast Regulations 1992 (and amendments) and is fully
interchange of cutting tools with accurate feed. CE approved.
• Powered by 550Watt motor through six-speed gearbox. • An optional stand is available, order Model No.
• Incorporates quiet running PTO gearbox with oil bath lubrication for power feed. SM3002ST.
• Supplied with three-jaw chuck, and dead centre. • Model No.
SM2502
• Fitted with no-load voltage release switch. • List Price
Xmas Price • Fully guarded to CE safety of machinery regulations
98/37/EEC and covered by EMC directive
Xmas Price £899.95
£999.95 exc
VAT
SAVE
89/336/EEC and Low Voltage directive 79/23/EEC. £599.95 exc
VAT
SAVE
£1174.94 £704.94
inc • Workshop stand available as an optional extra. inc
VAT 29% • Model No. SM27 • List Price £1399.95 VAT 33%
255mm Industrial Power Bandsaw 300mm Horizontal Hydraulic Arm Bandsaw
• Fully CE approved.
• Fully CE approved. • Heavy-duty power bandsaw
• Heavy-duty power bandsaw with with hydraulic cutting
hydraulic cutting arm control arm control for a
for a smooth cut. smooth cut.
• Maximum Capacity: 90mm at 60°, • 300mm Capacity at 90°
150mm at 45° and 255mm at 0°. and 170mm at 45°.
• 750W/230V Motor. • 550W/230V Motor.
• Saw arm fitted with hydraulic damping to • Fully guarded and fitted
prevent the arm being dropped onto the with pulley cover safety switch.
workpiece and to ensure smooth • Saw arm fitted with hydraulic
cutting performance. damping to prevent the arm
• Bow rotates up to 60° angle allowing being dropped onto the
workpiece to always sit in a workpiece and to ensure
central position. smooth cutting performance.
• Model No. SM355CE • Model No. SM35CE
• List Price £2495.95 • List Price £1299.95
Xmas Price Xmas Price
£1499.95 exc
VAT
SAVE
£869.95 exc
VAT
SAVE
£1762.44 inc
VAT 40% £1022.19 inc
VAT 33%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 19
20ltr Wet & Dry Vacuum Cleaner 30ltr Wet & Dry Vacuum Cleaner 20ltr Wet & Dry Industrial Vacuum
1250W/230V 1400W/230V Cleaner 1250W/110V Stainless Bin
• Powerful 1250Watt motor • Powerful 1400Watt motor • Powerful 1250Watt 110V motor
head gives incredible suction head gives incredible suction head gives incredible suction
through Ø35mm hosing. through Ø35mm hosing. through Ø35mm hosing.
• Blower facility. • Blower facility. • Blower facility.
• Constructed from high • Constructed from high • 20ltr Stainless steel drum
impact plastic, the drum impact plastic, the drum and telescopic rigid
unit is mounted on two unit is mounted on four extension tube plus tools
castor and two fixed wheels. castor wheels. for wet and dry operations.
• Tool storage points on • Tool storage points on • Tool storage points on head
head and base. head and base. and base.
• Designed for use • Designed for use with • 4mtr Cable and 110V plug.
with cartridge filter cartridge filter or dust • Designed for use with
or dust collection collection bag (optional) cartridge filter or dust
bag (optional) for for fast and clean collection bag
fast and clean disposal of waste. (optional) for fast and
disposal of waste. • Supplied with clean disposal of waste.
• Supplied with cartridge cartridge filter • Supplied with cartridge
filter and wet-use • Model No. and wet-use • Model No. filter and wet-use
foam filter. PC200 foam filter. PC300 foam filter. • Model No.
• List Price • List Price PC200SD110V
£94.95 £119.95 • List Price £124.95
FREE FREE FREE
Dust Collection Bags Dust Collection Bags Dust Collection Bags
Pack of 5 Pack of 5 Pack of 5
• Model No. PC200PB5 • Model No. PC300PB5 • Model No. PC200PB5
Xmas Price • List Price £16.45
Xmas Price • List Price £19.95
Xmas Price • List Price £16.45
£74.95 exc
VAT
SAVE
£84.95 exc
VAT
SAVE
£94.95 exc
VAT
SAVE
£88.07 inc
VAT 21% £99.82 inc
VAT 29% £111.57 inc
VAT 24%
20ltr Wet & Dry Industrial Vacuum 30ltr Wet & Dry Industrial Vacuum 20ltr Wet & Dry Valeting Machine
Cleaner 1250W/230V Stainless Bin Cleaner 1400W/230V Stainless Bin with Accessories 1250W/230V
• Powerful 1250Watt motor • Powerful 1400Watt motor head gives • Cleans carpets, car interiors, fabrics
head gives incredible suction incredible suction through and upholstery.
through Ø35mm hosing. Ø35mm hosing. • Supplied with carpet lance, hand held
• Blower facility. • Blower facility. lance, full wet and dry vacuum
• 20ltr Stainless steel drum • 30ltr Stainless steel accessory kit, including stainless
and telescopic rigid extension drum and telescopic steel telescopic rigid extension tube,
tube plus tools for wet and rigid extension tube cartridge filter and foam filter.
dry operations. plus tools for wet and • Powerful pump forces cleaning
• Tool storage points on head dry operations. fluid into fabric/carpet and leaves
and base. • Tool storage points surface virtually dry after
• Designed for use with on head and base. one pass.
cartridge filter or dust • Designed for use with • Features safety shut-off
collection bag (optional) cartridge filter or dust for wet operation.
for fast and clean disposal collection bag (optional) • Large capacity drum with
of waste. for fast and clean external detergent tank
• Supplied with cartridge disposal of waste. for easy filling.
filter and wet-use • Model No. PC300SD • Fitted with two fixed
foam filter. • Model No. • List Price £169.95 wheels and two castors.
PC200SD • Model No. PC310
• List Price • List Price £299.95
£119.95
FREE FREE
Dust Collection Bags Dust Collection Bags
Pack of 5 Pack of 5
• Model No. PC200PB5 • Model No. PC300PB5
Xmas Price • List Price £16.45
Xmas Price • List Price £19.95
Xmas Price
£87.95 exc
VAT
SAVE
£124.95 exc
VAT
SAVE
£149.95 exc
VAT
SAVE
£103.34 inc
VAT 27% £146.82 inc
VAT 26% £176.19 inc
VAT 50%
77ltr Industrial Wet & Dry Vacuum Cleaner 50ltr Super Professional
Stainless Drum 2400W/230V Swivel Bin Empty AutoValet Wet & Dry
• Twin motors offer superior vacuuming power. Valeting Machine
• Suitable for industrial and commercial applications.
• Stainless steel drum with dual filtration system Stainless Bin
for superior performance.
• Features safety shut-off for wet operation. • 25ltr External detergent tank
• Trolley with swivel drum and two rear locking for easy filling and a 50ltr
wheels for easy emptying. recovery tank.
• Front castors for added manoeuvrability. • Comprehensive set of tools
• Ø38mm Accessory kit, 3.2mtr cable with and accessories for wet and
3-pin plug, cloth and paper cartridge filters. dry car interior cleaning.
• Illustrated with optional squeegee • 100psi Operating pressure.
with foot operated • Model No. VMA913
adjustment. • List Price £799.95
• Replacement
Cartridge Filter:
PC477.PF.
• Replacement
Cloth Filter Assembly:
PC477.CF.
• Optional Squeegee:
PC477AK1.
• Model No. PC477
• List Price £569.95
Xmas Price Xmas Price
£359.95 exc
VAT
SAVE
£479.95 exc
VAT
SAVE
£422.94 inc
VAT 37% £563.94 inc
VAT 40%
20 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Pressure Washer Accessory Kit 95bar Pressure Washer with TSS & 120bar Pressure Washer with TSS &
• Includes a wide range of pressure washer
accessories for multiple uses.
Rotablast Nozzle® 230V Rotablast Nozzle® 230V
• Contents: 2 x Extension • Lightweight and compact unit designed
Lance, Safety Goggles, for domestic use. • Heavy-duty portable unit for light
Rotary Brush, • Unit features Automatic Total Stop trade and domestic use.
Fixed Brush, System (TSS) which switches the • Features Automatic Total Stop
Surface Brush, motor on and off when the lance System (TSS) which switches
Drain Cleaner trigger is operated, prolonging the motor on and off when the
Kit, Fan Spray the motor life. lance trigger is operated,
Nozzle, 2 x Angle • Supplied with 3mtr hose, high/low prolonging the motor life.
Connectors, Hex Key. pressure lance, detergent bottle • Supplied with 8mtr hose,
• Features adaptors and fixed brush nozzle storage reel, jet/flat lance,
to allow compatibility attachment. detergent bottle and
with other brands of • Includes Rotablast Nozzle® Rotablast Nozzle® which
pressure washers. which helps develop the helps develop the same
• Model No. PCKIT same Effective Cleaning Effective Cleaning Power
• List Price £99.95 Power (ECP) as a 2300psi (ECP) as a 2950psi washer.
washer. • Manufactured with
heavy-duty wheels for
Xmas Price • Suitable for a wide range
of applications. easy transportation
£64.95 exc
VAT
SAVE
NEW • Model No. PC2351
• List Price £124.95
over rough terrain.
£76.32 inc
VAT 35%
DID YOU KNOW...
Sealey now stock a large range
of Pressure Washer Accessories. Xmas Price Xmas Price • Suitable for a wide
range of applications.
See page 762 of our NEW £79.95 exc
VAT £139.95 exc
VAT • Model No.
812 page Catalogue.
£93.94 inc
VAT
SAVE
36% NEW £164.44 inc
VAT
SAVE
44% PC2901
• List Price £249.95
130bar Pressure Washer with TSS & 140bar Pressure Washer with TSS & 130bar Pressure Washer
Rotablast Nozzle® 6.3ltr/min 230V Rotablast Nozzle® 230V NEW 7ltr/min 2.4hp Petrol
• Automatic Total Stop System cuts out • Heavy-duty induction motor unit
produces enough power to pump • Petrol powered
machine when not in use, prolonging
450 litres of water every hour. pressure washer
motor life.
• Unit features Automatic with recoil starting.
• Rotablast Nozzle® produces
Total Stop System (TSS) • 5mtr Pressure hose,
cleaning power effect of 3200psi.
which switches the 1mtr gun and lance
• Fitted with long life induction
motor on and off when the and adjustable nozzle.
motor.
lance trigger is operated, • Low-pressure liquid
• Pump delivers 380 litres per
prolonging the motor life. detergent injection system.
hour water flow.
• Supplied with 8mtr hose • Safety latch on trigger and
• Supplied with lance and
reel, Vari-Nozzle and automatic low-oil engine
6mtr high pressure hose.
Rotablast Nozzle® which shutdown reduce risks of
• Heavy-duty pump develops
helps develop the same misuse and
130 bar at manifold.
Effective Cleaning Power equipment damage.
• Integral trolley with lance,
(ECP) as a 3450psi washer. • Output Pressure/Flow:
gun, hose and detergent
• Includes integral detergent 1300psi/420ltr/hr.
bottle storage.
tank with detergent flow • Supplied with
• Model No. PC2950
control valve and holder tools and full
• List Price £279.95
for extra 5ltr tank. instructions.
• Suitable for a wide range of • Model No.
automotive, industrial, PCM1300
agricultural, marine and • List Price £449.95
domestic applications.
• Model No.
PC3451
Xmas Price Xmas Price • List Price Xmas Price
£149.95 £269.95 £279.95
exc exc £439.95 exc
VAT VAT VAT
SAVE SAVE SAVE
£176.19 inc
VAT 46% £317.19 inc
VAT 39% £328.94 inc
VAT 38%
220bar Pressure Washer 300bar Pressure Washer
10ltr/min 6.5hp Petrol 15ltr/min 10hp Diesel
• Diesel powered pressure
• Petrol powered pressure
washer with electric
washer with recoil
and recoil starting.
starting.
• High pressure and
• 5mtr Pressure hose,
high flow with diesel
1mtr gun and lance
economy.
and adjustable
• 5mtr Pressure hose,
nozzle.
1mtr gun and lance
• Low-pressure liquid
and five interchangeable
detergent injection
nozzles.
system.
• Low-pressure liquid
• Provision for detergent
detergent injection system.
bottle storage.
• Safety latch on trigger,
• Safety latch on trigger
automatic low-oil engine
and automatic low-oil engine
shutdown and thermal pump
shutdown reduce risks of
relief valve reduce risks of
misuse and equipment damage.
misuse and equipment damage.
• Output Pressure/Flow:
• Output Pressure/Flow:
2500psi/600ltr/hr.
3600psi/900ltr/hr.
• Pneumatic tyres.
• Pneumatic tyres.
• Supplied with tools and full
• Supplied with tools, spare
instructions.
fuel filter and gasket set.
• Model No. PCM2500
• Model No. PCDM3600
• List Price £699.95
• List Price £1799.95
Xmas Price Xmas Price
£449.95 exc
VAT
SAVE
£1149.95 exc
VAT
SAVE
£528.69 inc
VAT 36% £1351.19 inc
VAT 36%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 21
Please refer to our Winter Promotion for our comprehensive range of Heaters.
68,000-97,000Btu/hr Propane Space Heater 68,000-97,000Btu/hr Propane Space Heater
• 68,000-97,000Btu/hr
Stainless Steel N
(19.8-28.4kW) Variable
output (Propane). • 68,000-97,000Btu/hr EW
• Fully approved gas (19.8-28.4kW) Variable
regulator. output (Propane).
• Features safety solenoid • Fully approved gas
preventing the unit from regulator.
leaking gas without first • Features safety solenoid
being electrically started. preventing the unit from
• Front foot offers height leaking gas without first
adjustment allowing the being electrically started.
heat to disperse at different angles. • Front foot offers height adjustment allowing the
• Fan assisted, fitted with a piezoelectric ignition heat to disperse at different angles.
system for trouble-free starting and features • Fan assisted, fitted with a piezoelectric ignition
a direct gas head assembly. system for trouble-free starting and features a direct
gas head assembly.
Xmas Price • Complies with all relevant CE and EN directives Xmas Price • Complies with all relevant CE and EN directives
£189.95 exc
VAT
SAVE
and standards as certified by DVGW.
• Manufactured to BS EN 416. £199.95 exc
VAT
SAVE
•
and standards as certified by DVGW.
Manufactured to BS EN 416.
£223.19 inc
VAT 37% • Model No. LP100
• List Price £299.95
£234.94 inc
VAT 38% •
•
Model No. LP100S
List Price £319.95
70,000Btu/hr Space Warmer 125,000Btu/hr Space Warmer
Paraffin/Kerosene/Diesel Heater Paraffin/Kerosene/Diesel Heater
• 125,000Btu/hr (36.6kW)
• 70,000Btu/hr (20.5kW) Heat output.
Heat output.
• Fitted with thermostat
• Fitted with thermostat
indicated in °C.
and digital room
• Clean burning.
display both given in °C.
• Proven pump system
• Clean burning.
can operate with either
• Proven pump system can
paraffin, kerosene
operate with either paraffin,
or diesel with only
kerosene or diesel with only
minor adjustment of
minor adjustment of air
air compressor.
compressor.
• Fitted with safety cut-out.
• Fitted with safety cut-out.
• Complies with rigorous
• Complies with rigorous
standards.
standards.
• Model No. AB1258
Xmas Price Xmas Price • List Price £769.95
£289.95 exc
VAT
SAVE
• Model No.
AB708 £429.95 exc
VAT
SAVE
£340.69 inc
VAT 44% • List Price
£519.95
£505.19 inc
VAT 44%
2kW Industrial Fan Heater 20kW Infrared Paraffin/Kerosene/Diesel
Heater 230V
• Electric fan heater for NEW • Infrared heater suitable for well ventilated
industrial applications. indoor applications.
• One heat setting with thermostat • 70,000Btu/hr Heat output.
control, plus fan only. • Heats objects, not the surrounding air.
• A totally dry heat with no • No flue or exhaust pipe - combustion
condensation, no gas, no fumes, gases are catalysed.
no smell. • Clean burning.
• Ideal for workshops, garages etc. • Proven pump system can operate
• Supplied with power cable with either paraffin, kerosene
and 3-pin plug. or diesel.
• Model No. EH2001 • 15ltr Tank allows approximately
• List Price £99.95 7hrs running time, making
this unit extremely • Model No.
economical. IR20
• List Price
Xmas Price Xmas Price £649.95
£63.95 exc
VAT
SAVE
£429.95 exc
VAT
SAVE
£75.14 inc
VAT 36% £505.19 inc
VAT 34%
1.5/3.0kW Infrared Cabinet 1.4/2.8KW Infrared Cabinet
Heater 230V Heater 230V NEW
• Powder coated metal cabinet with two quartz
• Heavy-duty composite cabinet with two quartz infrared
infrared elements and chemically polished
elements and chemically polished reflectors for
reflectors for maximum heat emission.
maximum heat emission.
• Controllable power output by rocker switches
• Features protection grill and two heavy-duty
on the side of the cabinet.
composite wheels.
• Min./Max. Power: 1.5kW - 3.0kW.
• Controllable power output with rocker switches on
• Features easy-rolling castors with two locking
the rear of unit.
castors fitted to the rear.
• Suitable for a wide variety of heating requirements
• Suitable for a wide range of heating including
including restorative applications.
restorative applications.
• Supplied with cable and BS 1363/A approved plug.
• Supplied with cable and BS/ASTA approved
• Model No. IRC1428
plug.
• List Price £324.95
• Model No.
IRC153
• List Price
Xmas Price £324.95 Xmas Price
£189.95 exc
VAT
SAVE
£199.95 exc
VAT
SAVE
£223.19 inc
VAT 42% £234.94 inc
VAT 38%
22 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
12V RoadStart® Emergency 12V RoadStart® Emergency 12V/24V RoadStart® Emergency
Power Pack 900 Peak Amps Power Pack 1000 Peak Amps Power Pack 3000 Peak Amps
• Delivers up to • Composite case with battery
• LED battery 1000 Peak clip storage lugs
condition, polarity Amps of initial and carry handle.
check and charge starting power. • Cable and Clamp
indicators. • Cable and Length: 1mtr.
• Features Clamp • Easy-to-read,
independent on/off Length: colour coded
switch which allows 0.5mtr. analogue
the positive clamp • Starts up gauge
to be connected to 30 cars measures
without the risk of before battery
sparking and an recharging, condition
integral Krypton depending and charge
work light for use on the length indicator.
at night. of crank time • Test cycle
• Fitted with 12Volt power needed to start each one. button gives
socket that will accept any 12Volt device fitted with a • Monitor power pack condition using TEST function. true battery
cigarette lighter type plug. • Display via 5 LED indicators. indication.
• Supplied with mains charger, DC charger and • Use as a 12V power supply too - includes a lighter type socket. • 230Volt Charger with
double plug adaptor for in-car charging. • Supplied with mains charger and double plug adaptor for automatic power cut-off
• Model No. RS131 in-car charging. prevents damage to battery whilst charging from the mains.
• List Price £124.95 • Model No. RS1 • Fitted with a power socket that will accept any 12V device
• List Price £229.95 with a cigarette lighter type plug.
• Model No. RS125
Xmas Price Xmas Price Xmas Price • List Price £379.95
£69.95 exc
VAT
SAVE
£129.95 exc
VAT
SAVE
£229.95 exc
VAT
SAVE
£82.19 inc
VAT 44% £152.69 inc
VAT 43% £270.19 inc
VAT 39%
12Amp 6/12V Electronic 10Amp 12V Digital Electronic 14Amp 12/24V
Battery Charger Battery Charger Battery Charger
NEW
• 10Amp, 12Volt output.
• 12Amp, 6V/12Volt output. • Compact electronic battery charger with pressed steel
• Compact electronic battery charger with pressed steel casing and carry handle.
• 14Amp, 12/24Volt output.
casing and carry handle. • Intelligent charge control and selectable slow or fast
• Fitted with ammeter.
• Intelligent charge control, selectable 6V or 12V and slow charge output are perfect for long-term maintenance of
• Professional charger in heavy-duty metal case.
or fast output are perfect for long-term maintenance batteries on irregularly or seasonally-used vehicles.
• Dash mounted fuse provides polarity protection.
of batteries on irregularly or seasonally used vehicles. • Suitable for lead acid, AGM or gel batteries.
• Supplied with 1400mm output cables with heavy-duty
• Suitable for lead acid or low maintenance batteries. • Reverse polarity protection prevents inadvertent damage
crocodile clips.
• Reverse polarity protection prevents inadvertent damage to charger.
• Model No. SUPERCHARGE15/1
to charger. • LED display confirms charger status.
• LED display confirms • List Price £134.95
charger status. • Large 20mm high digital
Xmas Price • Model No. Xmas Price ammeter shows charging
current.
Xmas Price
£39.95 £41.95 £84.95
exc AUTOCHARGE12 exc exc
VAT • List Price VAT • Model No. VAT
SAVE SAVE SAVE
£46.94 inc
VAT 33% £59.95
£49.29 inc
VAT 30% AUTOCHARGE10D
• List Price £59.95 £99.82 inc
VAT 37%
140/21Amp 12V 300/45Amp Starter/Charger 450/75Amp Starter/Charger
Starter/Charger 12/24V 12/24V
• Max. Charge: • Max. Charge:
45Amps 75Amps
(30Amps EN). (50Amps EN).
• Max. Start: • Max. Start: 450Amps
300Amps (300Amps EN).
(180Amps EN). • 6/12Amps input
• 3.8/7.5Amps (charge).
input (charge). • 30Amps input
• 22Amps input (start).
(start). • Polarity protected.
• Fused polarity • Heavy-duty
protection. transformer, flush
• EU Cenelec mounted ammeter
specification and variable
EN 60335. charge rate
• Max. Charge: 21Amps (14Amps EN). • Model No. controls.
• Max. Start: 140Amps (80Amps EN). SUPERSTART320 • Fast-charge timer.
• 12Volt output. • List Price • EU Cenelec
• Easy-to-read ammeter and illuminated power switch. £469.95 specification
• Made in Europe to EU Standard Cenelec EN 60335. EN 60335.
• Polarity protected. • Model No.
• Model No. SUPERBOOST140 SUPERSTART520
• List Price £209.95 • List Price £599.95
Xmas Price Xmas Price Xmas Price
£129.95 exc
VAT
SAVE
£299.95 exc
VAT
SAVE
£379.95 exc
VAT
SAVE
£152.69 inc
VAT 38% £352.44 inc
VAT 36% £446.44 inc
VAT 37%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 23
Professional Soldering Irons 8pc Soldering Gun/ 180mm Electric
ted
Dual Wattage 230V llu
str
a Iron Kit 230V Tile Cutter
0I
153
SD
• Powered
by 500W -
230V
NEW electric
motor with
• Comprehensive
kit containing thermal overload
100Watt soldering protection and
• Dual wattage settings allow the user to carry out work
gun, 30Watt soldering VDE
requiring different temperatures.
iron, iron holder, excess approved magnetic safety switch.
• Fitted with high quality long life tip suitable for SAVE
solder extractor, scraper, • Supplied with Ø180mm continuous rimmed diamond
lead free soldering and 1.3mtr cable with UP TO
cutting blade.
BS approved 230Volt/13Amp plug. 43% spare tips, solder wire and
universal workpiece clamps. • Model No. TC180 Suitable for:
Model No. Power List Xmas Xmas • List Price £99.95
Ceramics
Rating Price Price Price • Model No. SD300K
Exc VAT Inc VAT Xmas Price • List Price £47.95 Xmas Price Porcelain
SD1530 15/30W £29.95 £17.95 £21.09 £29.95 exc
VAT
SAVE
£69.95 exc
VAT
SAVE
Quarry
Slate
SD4080 40/80W £34.95 £19.95 £23.44 £35.19 inc
VAT 38% £82.19 inc
VAT 30% Stone
7 Function Digital Multimeter 8 Function Professional Pipe Threading
• Quality tradesman’s
multimeter Auto Ranging Digital Multimeter Kit 3/8"-2"BSPT
with 26mm • High precision
high easy auto-ranging multimeter.
to read • Conforms with
• 3/8"-
LCD display. EN 61010-1 CATIII
2"BSPT.
• Features 600V safety
• Ratchet type
protective requirements for
pipe threading
boot, probe electrical equipment for
set with cassette
storage and measurement, control,
style die heads.
integral stand. and laboratory use.
• Lightweight design with
• Measures: • Temperature
seven tool-steel cutting bits.
AC/DC Voltage measurement capability,
• Snap in die cassettes allow fast
& Current max/data hold and auto
interchange between pipe sizes.
& Resistance. power off function.
• Suitable for iron and
• Audible • Model No. TM102 • Twin ratchet pawl
stainless steel pipe.
Continuity. • List Price £59.95 head assembly
with free run
Xmas Price Xmas Price Xmas Price facility.
£23.95 exc
VAT
SAVE
• Diode/Transistor
Verification Mode. £39.95 exc
VAT
SAVE
£79.95 exc
VAT
SAVE
• Model No.
PTK992
£28.14 inc
VAT 36% • Model No. MM24
• List Price £37.45 £46.94 inc
VAT 33% £93.94 inc
VAT 43% • List Price £139.95
760mm Bench Mounting Sheet Metal Folder Floor Mounting Metal Bender
• Manually operated, floor mounting metal bender.
• Radiused and angled bends in strip up to 50mm wide.
• Radiused bends in round/square
stock up to 16mm diameter/side.
• Supplied with seven dies, 1" to 3".
• Model No. PBF04
• List Price £129.95
SAVE
35%
• Ideal for the small garage or restoration operation.
Xmas Price • Capable of bending up to 17 gauge steel sheet.
• Suitable clamps (not included) are required
Xmas Price
£49.95 exc
VAT
SAVE
to secure the pressing plate for operation.
• Model No. DF760
£84.95 exc
VAT
£58.69 inc
VAT 38% • List Price £79.95 £99.82 inc
VAT
16tonne Hydraulic Pipe Bender 15tonne Industrial Hydraulic Pipe Bender
• Floor standing pipe bender with
fabricated steel chassis and
with Stand
heavy-duty 16tonne hydraulics • Tripod mounted pipe bender
with integral pump and reservoir. suitable for bending pipes up
• Fitted with externally to 180°.
mounted return springs. • Integral 15tonne ram.
• Suitable for bending gas and air • Suitable for bending DIN classified
pipe from Ø15mm medium and heavy pipe.
up to Ø75mm(3"). • Two-speed hydraulic pump gives fast
• Bends up to 180° (3 x 60° bends). pipe positioning and the power
• Die Sizes: 15mm(1/2"), to bend 75mm pipe.
20mm(3/4"), 25mm(1"), • Supplied with eight (1/2" - 3")
32mm(1-1/4"), 40mm(1-1/2"), interchangeable pipe dies and
50mm(2"), 63mm(2-1/2"), packed in a heavy wooden
75mm(3"). crate for easy transportation.
• Model No. PBS99/14 • Model No. PBS91
• List Price £299.95 • List Price £699.95
Xmas Price Xmas Price
£199.95 exc
VAT
SAVE
£449.95 exc
VAT
SAVE
£234.94 inc
VAT 33% £528.69 inc
VAT 36%
24 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
10tonne Bench Type 10tonne Floor Type
Hydraulic Press Hydraulic Press
• Table Aperture: 140mm.
• Working Table Width: 360mm. • Table Aperture: 90mm.
• Overall Height: 945mm. • Working Table Width: 416mm.
• High quality industrial press ideal for • Overall Height: 1514mm.
pressing, bending and extruding. • Detachable pump and ram allowing
• Supplied with gauge. hydraulics to be used for other
• Suitable for many automotive and purposes when press is not in use.
industrial applications. • Supplied with gauge.
• Model No. YK10B • Model No. YK10F
• RSP Price €292.45 • RSP Price €584.95
Xmas Price Xmas Price
€224.95 exc
VAT
SAVE
€269.95 exc
VAT
SAVE
€264.32 inc
VAT 38% €317.19 inc
VAT 40%
20tonne Floor Type 30tonne Floor Type
Hydraulic Press Hydraulic Press
• Table Aperture: 105mm. • Table Aperture: 164mm.
• Working Table Width: 550mm. • Working Table Width: 550mm.
• Overall Height: 1810mm. • Ram Stroke: 150mm.
• Detachable pump and ram allowing • Steel frame construction.
hydraulics to be used for other • Hydraulic pump unit.
purposes when press is not in use. • Sliding hydraulic ram assembly giving 195mm
• Supplied with gauge. of lateral travel for off-centre pressing applications.
• Model No. YK20F • Fitted with ram pressure gauge.
• RSP Price €844.95 • Supplied with flat pressing
plate/V-blocks.
• Model No. YK30F
• RSP Price €1273.95
Xmas Price Xmas Price
€424.95 exc
VAT
SAVE
€599.95 exc
VAT
SAVE
€499.32 inc
VAT 35% €704.94 inc
VAT 39%
50tonne Floor Type 75tonne Floor Type
Hydraulic Press Hydraulic Press
• Table Aperture: 235/185mm. • Table Aperture: 251/201mm.
• Working Table Width: 730mm. • Working Table Width: 800mm.
• Ram Stroke: 200mm. • Ram Stroke: 200mm.
• Steel frame construction. • Steel frame construction.
• Hydraulic pump unit. • Hydraulic pump unit.
• Sliding hydraulic ram assembly giving • Sliding hydraulic ram assembly giving
250mm of lateral travel for off-centre 285mm of lateral travel for off-centre
pressing applications. pressing applications.
• Fitted with ram pressure gauge. • Fitted with ram pressure gauge.
• Supplied with flat pressing • Supplied with flat
plate/V-blocks. pressing plate/V-blocks.
• Model No. YK509F • Model No. YK759F
• RSP Price €2469.95 • RSP Price €3548.95
Xmas Price Xmas Price
€1299.95 exc
VAT
SAVE
€1699.95 exc
VAT
SAVE
€1527.44 inc
VAT 32% €1997.44 inc
VAT 38%
• Model No. PK2000 • Model No. PK3000
Arbor Presses • RSP Price • RSP Price Oil Filter
• Cast frame with machined steel €259.95 €441.95
toothed arbor. Crushing Unit
• Four position table with varying
sizes of cut-outs • Used in conjunction with a press, this
for pressing unit crushes filters up to Ø115mm.
operations. • Oil and sludge drains into a
• Suitable for suitable container
repetitive (not supplied).
manufacturing • Crushing filters minimizes the cost
operations. of disposal of hazardous
• Model No. waste by volume.
PK1000 • Model No. OFC1
• RSP Price • RSP Price €155.95
€129.95
SAVE SAVE SAVE SAVE
35% 35% 35% 33%
Xmas Price Xmas Price Xmas Price Xmas Price FREE FREE
€64.95 €129.95 €219.95 €79.95
Adaptor for Oil Filter Crusher Adaptor for Oil Filter Crusher
exc exc exc exc
VAT VAT VAT VAT Ø50 x 115mm
• Model No. OFCA50 OR Ø60 x 115mm
• Model No. OFCA60
€76.32 inc
VAT €152.69 inc
VAT €258.44 inc
VAT €93.94 inc
VAT
• RSP Price €28.55 • RSP Price €25.95
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 25
Solar Powered Welding
Helmet Shade 9-13 Welding Helmets
• High quality infinitely variable shade
9-13 lens manufactured and tested
• Adjustable Shade: 9-13 Lens.
to BS EN 379.
• Fully automatic switching
• Featuring grinding function which
from light to dark on striking arc.
enables the user to grind without
• Complies to CE & DIN standards.
having to remove the mask, offering
• Adjustable headband with
full face protection.
front pad for added comfort.
• Fully automatic, switches from light to dark on striking arc.
• Features sensitivity
• Fitted with solar power panel - no batteries required.
and delay controls.
• Features sensitivity switch and delay speed switch control for switching
• Light to Dark Time:
dark to light, preventing arc eye when welding
0.1ms @ -5°C to +55°C. SAVE
at high power, whilst still providing fast 56%
• Model No. S0825
switching for tack welding.
• RSP Price €233.95
Model No. Colour RSP Xmas Price Xmas Price
Price Exc VAT Inc VAT
Xmas Price iegen PWH699B Blue €324.95 €109.95 €129.19
€67.95 exc
VAT
SAVE
tools PWH699G Grey €324.95 €109.95 €129.19
€79.84 inc
VAT 62% PWH699R Red €324.95 €109.95 €129.19
Workshop Welding Fume Extractor
or
Welding Curtains • Designed to filter out harmful
fumes from the atmosphere.
• Supplied with amber • Fitted with spark and charcoal filter to
welding screen remove large concentrations of
to BS EN 1598.
• Suitable for use in NEW ozone gas from fumes.
• Recommended for professional use.
workshops where • Supplied with 5mtr extractor
the glare from welding hose and collector nozzle.
and cutting may be • 1000W/230V Motor.
a hazard to others. • Model No. WFS/94
• Supplied with two feet. • RSP Price €1039.95
• Curtain and frame
supplied flat packed. SAVE
• Assembles with ease. UP TO
SSP992 Illustrated
39%
Model No. Size RSP Xmas Price Xmas Price
(W x H) Price Exc VAT Inc VAT
Xmas Price
SSP992 1.8 x 1.75mtr €207.95 €99.95 €117.44 €549.95 exc
VAT
SAVE
SSP993 2.4 x 1.75mtr €233.95 €109.95 €129.19 €646.19 inc
VAT 31%
80Amp Inverter 230V NEW 130Amp Inverter 230V NEW 160Amp Inverter 230V NEW
with Accessory Kit with Accessory Kit with Accessory Kit
• Compact lightweight unit, • Compact lightweight unit, • Compact lightweight unit,
weighing just 3.5kg, is weighing just 5kg, is weighing just 5kg, is
suitable for arc welding suitable for arc welding suitable for arc welding
using scratch-start using scratch-start using scratch-start
method. method. method.
• Automatic Arc-Force • Automatic Arc-Force • Automatic Arc-Force
circuitry makes the unit circuitry makes the unit circuitry makes the unit
suitable for arc welding suitable for arc welding suitable for arc welding
a wide variety of rods a wide variety of rods a wide variety of rods
including rutile, basic including rutile, basic including rutile, basic
and stainless from and stainless from and stainless from
Ø1.6mm up to Ø2.5mm. Ø1.6mm up to Ø4.0mm. Ø1.6mm up to Ø5.0mm.
• Also includes thermal • Also includes thermal • Also includes thermal
cut-out and mains cut-out and mains cut-out and mains
voltage LEDs. voltage LEDs. voltage LEDs.
• Model No. MWE80C • Model No. MWE130C • Model No. MWE160C
Xmas Price • RSP Price €324.95 Xmas Price • RSP Price €441.95 Xmas Price • RSP Price €519.95
€159.95 exc
VAT
SAVE
€209.95 exc
VAT
SAVE
€244.95 exc
VAT
SAVE
€187.94 inc
VAT 36% €246.69 inc
VAT 38% €287.82 inc
VAT 39%
Stud Welder with Slide Hammer Oxyacetylene Gas
• Quality tool for fast, efficient body repairs.
Welding/Cutting Set
• Removes dents quickly, without holes, • Complete set of regulators
or having to remove interior trim. and torches for oxyacetylene
• Amazing pull power for gas welding.
even tough, heavier • Single stage gas regulators
gauge panels. with 2 gauges to show bottle
• Welds on pressure and working pressure.
screws and • 4.5mtr Twin gas hose set with
studs. check valves (to torch) and
• Supplied with EN 730-compliant pressure
slide hammer. activated flash arrestors
• Model No. SR20 (to regulators).
• RSP Price €883.95 • Welding torch with 3 lightweight nozzles.
• Cutting torch attachment with
3 ANMS cutting nozzles.
• Spark lighter.
Xmas Price Xmas Price
€454.95 exc
VAT
SAVE
€229.95 exc
VAT
SAVE
• Model No.
€534.57 inc
VAT 33% €270.19 inc
VAT 30%
SGA1
• RSP Price €428.95
26 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
130Amp MiniMIG Portable 150Amp MIG Welder 180Amp MIG Welder
MIG Welder 230V 230V with Euro Torch 230V
• Features heavy-duty • Features heavy-duty • Features heavy-duty high output
high output high output transformer and forced-air cooling
transformer and transformer and to ensure the highest
forced-air cooling forced-air cooling level of performance.
to ensure the highest to ensure the highest • Includes spot weld
level of performance. level of performance. timer for even and
• Contoured grip, • Suitable for welding consistent spot welds
non-live torch with CO2, Argon when joining two
ensures a steadier or CO2/Argon mix. panels together.
weld bead. • Includes industrial • Suitable for welding
gas regulator, with CO2, Argon or
spool of wire, CO2/Argon mix.
contact tips 0.6, • Binzel® non-live Euro
0.8mm and gas torch is comfortable
cup. in the hand thus
ensuring
• Includes hand-held mask, mini gas a steadier
regulator, spool of wire, contact weld bead.
tips 0.6 and 0.8mm and gas cup. • Includes
• Model No. S0771 • Model No. S0816 industrial gas
• RSP Price €467.95 • RSP Price €584.95 regulator, contact tips
SAVE FREE 0.6, 0.8mm and gas cup.
• Model No. S0863
FREE
47% Solar Powered Welding Helmet Solar Powered Welding Helmet
Shade 9-13 • RSP Price €909.95 Shade 9-13
• Model No. S0825 • Model No. S0825
Xmas Price Xmas Price • RSP Price
€233.95 Xmas Price • RSP Price
€233.95
€189.95 exc
VAT €284.95 exc
VAT
SAVE
€399.95 exc
VAT
SAVE
€223.19 inc
VAT €334.82 inc
VAT 37% €469.94 inc
VAT 43%
150Amp Professional 190Amp Professional 210Amp Professional
Gas/No-Gas MIG Welder Gas/No-Gas MIG Welder Gas/No-Gas MIG Welder
• Heavy-duty high output
transformer and forced-air
with Euro Torch with Euro Torch
cooling to maximize duty • Heavy-duty high output • Heavy-duty high output
cycle performance. transformer and forced transformer and forced
• Supplied with comfort air cooling to maximize air cooling to maximize
grip non-live torch, duty cycle performance. duty cycle performance.
1.8mtr earth cable, • 190Amp Maximum • 210Amp Maximum
1mtr gas hose, current. current.
0.45kg flux cored wire • Supplied with a high • Supplied with a high
and 1.0mm contact tip. quality BINZEL® MB15 quality BINZEL® MB15
• Set up in the no-gas Euro torch, 2mtr earth Euro torch, 2mtr earth
welding mode, but can cable, 1.4mtr of gas hose, cable, 1.4mtr of gas
also easily be switched twin gauged gas regulator, hose, twin gauged gas
to gas by simple 1kg spool of 0.6mm wire, regulator, 1kg spool
change of polarity 0.6 and 0.8mm tips. of 0.6mm wire, 0.6
and the purchase • Set up in the and 0.8mm tips.
of a gas • Set up in the
welding gas
mode welding
Gas but mode but
Conversion Kit - can also easily can also easily be
Model No. 120.802032.
• Model No. MIGHTYMIG150
FREE be switched to gasless. • Can be used with large,
industrial CO2 gas bottles.
switched to gasless.
• Model No. MIGHTYMIG210
FREE
Solar Powered Welding Helmet Solar Powered Welding Helmet
• RSP Price €545.95 Shade 9-13 • Model No. • RSP Price €12080.95 Shade 9-13
• Model No. S0825 MIGHTYMIG190 • Model No. S0825
Xmas Price • RSP Price €233.95
Xmas Price • RSP Price €1065.95 Xmas Price • RSP Price
€233.95
€279.95 exc
VAT
SAVE
€439.95 exc
VAT
SAVE
€549.95 exc
VAT
SAVE
€328.94 inc
VAT 33% €516.94 inc
VAT 46% €646.19 inc
VAT 41%
140Amp Professional 185Amp Professional MIG 220Amp Professional MIG
MIG Welder 230V Welder with Euro Torch 230V Welder with Euro Torch 230V
• 185Amp Maximum performance. • 220Amp Maximum performance.
• Forced Air Cooling • Forced Air Cooling System allows • Forced-Air Cooling System
System allows high duty cycle. allows high duty cycle.
high duty cycle. • Latest design chassis • Latest design chassis
• 140Amps maximum remains stable when remains stable when
output. used with medium used with medium sized
• Professional sized industrial gas industrial gas cylinders.
contour grip, cylinders. • Professional contour
heat proof • Professional grip, quick release
non-live torch contour grip, Euro non-live
ensures no quick torch.
sparks until you release • Fitted with
press the trigger. Euro spot weld
non-live timer.
torch. • Supplied
• Fitted with
with spot industrial
weld timer. CO2/Argon
• Supplied regulator.
with industrial • Ideal for the
CO2/Argon regulator. professional.
• Model No.
• Proven wire feed system for trouble-free welding.
• Welds stainless and aluminium too.
• Ideal for the professional.
• Model No. SUPERMIG185
FREE SUPERMIG220 FREE
ClearVision® Solar Powered • RSP Price €1468.95 ClearVision® Solar Powered
• RSP Price €740.95 Automatic Welding Automatic Welding
• Model No.
SUPERMIG140 Helmet Shade 9-13 Helmet Shade 9-13
Xmas Price • RSP Price €519.95 Xmas Price •
•
Model No. PWH599
RSP Price €259.95
Xmas Price •
•
Model No. PWH599
RSP Price €259.95
€219.95 exc
VAT
SAVE
€569.95 exc
VAT
SAVE
€629.95 exc
VAT
SAVE
€258.44 inc
VAT 45% €669.69 inc
VAT 40% €740.19 inc
VAT 44%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 27
Ø115mm Angle Grinder Hot Air Gun 1600W Variable Temperature
900W/230V 370°C/500°C Hot Air Gun Kit
• Suitable • Two step switch • Two step
for a variety for temperature airflow
of trade and airflow control
applications. control. switch,
• Heavy-duty • Gun is designed to with variable
alloy stand vertically, allowing use temperature
bevel as a safe Bunsen burner alternative. range 50-450°C/90-600°C.
gear head • Fitted BS approved • Gun is designed to stand vertically,
with composite body casing. 3 pin safety plug. allowing use as a safe Bunsen
• Heavy-duty 900Watt motor develops powerful 11,000rpm • Nozzles available burner alternative.
(no load speed). separately from HS107K. • Supplied with four nozzles and
• Features spindle lock for fast loading/unloading of discs. • Temperature Range scraper all in a storage case.
• Supplied with side handle, guard and spanner. from 370/500°C. • Model No. HS107K
SAVE
• Model No. SG115 • RSP Price €77.95 • Model No. HS105 • RSP Price €64.95
42%
• RSP Price €33.75
Xmas Price FREE Xmas Price Xmas Price
€34.95 €19.95 €32.95
5 x Grinding Discs
exc exc exc
VAT Ø115 x 6mm VAT VAT
22mm Bore
€23.44 €38.72
SAVE SAVE
€41.07 inc
VAT
•
•
Model No. PTC/115G
RSP Price €3.20
inc
VAT 23%
inc
VAT 34%
219pc Multi-Purpose Rotary 46pc 3.6V Cordless Li-ion
Tool & Engraver Set 230V Screwdriver Set
• Multi-purpose high-speed
power tool with on/off • Locking swivel
and electronic adjustment from pistol
variable to straight type.
speed • Forward, reverse and
controls. trigger-lock control.
• Stepless • Six adjustable torque
control between settings.
8000 and • Integral LED light to
35000rpm. illuminate working area.
• Spindle lock for fast • 6mm Quick-release bit holder.
tool changes. • Three LEDs indicate battery life.
• Supplied with tips, wheels, • Model No. CP36S
sanding discs/bands, dressing stone • RSP Price €51.95
and chuck spanner.
Xmas Price • Model No. E5188 Xmas Price
€39.95 exc
VAT
SAVE
• RSP Price €70.15
€25.95 exc
VAT
€46.94
SAVE
inc
VAT 26% €30.49 inc
VAT 35%
14.4V 1hr Charge Cordless 14.4V Super Torque Cordless
Impact Driver - 2 Batteries Hammer Drill/Driver
• Powerful, compact, cordless impact driver 1hr Charge - 2 Batteries
with electronic variable speed trigger.
• Extra powerful fan-cooled
• Forward, reverse and trigger lock control
motor developing up to 25Nm torque.
integrated into housing for ease of use.
• Electronic variable speed in forward/reverse
• Maximum Torque: 135Nm (100lb.ft).
and brake give complete control over workpiece.
• Superbly balanced tool with vibration
• Wide range of torque settings over two
reducing grip.
mechanical speeds including hammer action.
• Replaceable motor brushes.
• Built-in spirit level allows for accurate drilling.
• Quick-release bit holder.
• LED battery level indicator prompts re-charging
• Includes two 14.4Volt Ni-Cd battery
or switching to second battery (included).
packs and 1 hour mains charger.
• Auxiliary handle with internal storage
• Supplied in a carry-case.
for supplied 9pc bit set.
• Model No. CP1441
• Model No. CP3014VHK
• RSP Price €259.95
• RSP Price €233.95
Xmas Price Xmas Price
€99.95 exc
VAT
SAVE
€99.95 exc
VAT
SAVE
€117.44 inc
VAT 50% €117.44 inc
VAT 44%
18V Super Torque Cordless 24V Super Torque Cordless
Hammer Drill/Driver Hammer Drill/Driver
1hr Charge - 2 Batteries 1hr Charge - 2 Batteries
• Extra powerful fan-cooled • Extra powerful fan-cooled motor
motor developing up to 30Nm torque. developing up to 36Nm torque.
• Electronic variable speed in forward/reverse • Electronic variable speed in forward/reverse
and brake give complete control over and brake give complete control over
workpiece. workpiece.
• Wide range of torque settings over two • Wide range of torque settings over two
mechanical speeds including hammer action. mechanical speeds including hammer action.
• Built-in spirit level allows for accurate drilling. • Built-in spirit level allows for accurate drilling.
• LED battery level indicator prompts • Auxiliary handle with internal storage
re-charging or switching to for supplied 9pc bit set.
second battery (included). • Model No. CP3024VHK
• Model No. CP3018VHK • RSP Price €376.95
• RSP Price €311.95
Xmas Price Xmas Price
€174.95 exc
VAT
SAVE
€199.95 exc
VAT
SAVE
€205.57 inc
VAT 27% €234.94 inc
VAT 31%
28 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
LI-ION POWER TOOLS
What’s so good about Lithium-ion?
• Weight for weight Li-ion batteries give an all-round better performance than
standard Ni-Cd/Ni-MH cells.
• Has a flat discharge curve - performing better for longer.
• Li-ion has no memory effect - these batteries can recover from a deep discharge
with no tendency to reduce overall capacity.
• Li-ion technology is lightweight and therefore perfect for the tradesman or
high demand user.
Pressure Sensitive Triggers Ergonomic Design Safety Features
12V Cordless Drill/Driver 12V Cordless Reciprocating Saw
• Slim, compact and • Slim, compact and lightweight design.
lightweight design. • Responsive variable speed trigger gives
• Keyless chuck for higher control for intricate operations.
easy and fast bit
changing.
• 24 Torque settings
provide accurate
control to suit job in hand. • 12V Reciprocating
• Responsive variable Saw, Battery &
speed trigger gives • 12V Reciprocating Saw (No accessories). Mains Charger Kit.
higher control for • Model No. CP4002 • Model No. CP40COMBO12
intricate operations. • RSP Price €64.95 • RSP Price €168.85
Xmas Price Xmas Price
€31.95 exc
VAT
SAVE
€81.95 exc
VAT
SAVE
€37.54 inc
VAT 36% €96.29 inc
VAT 37%
12V Cordless Die Grinder
• 12V Drill/Driver, Battery • Slim, compact and lightweight design.
• 12V Drill/Driver (No accessories). & Mains Charger Kit. • Variable speed on/off control.
• Model No. CP4001 • Model No. CP40COMBO11 • Spindle lock for simple and
• RSP Price €64.95 • RSP Price €168.85 quick tool changes.
Xmas Price Xmas Price
€29.95 exc
VAT
SAVE
€79.95 exc
VAT
€35.19
SAVE
inc
VAT 40% €93.94 inc
VAT 38%
• 12V Die Grinder (No accessories).
• 12V Die Grinder,
Battery & Mains Charger Kit.
• Model No. CP4003 • Model No. CP40COMBO13
• RSP Price €38.95 • RSP Price €142.85
12V Cordless 100mm
Angle Grinder Xmas Price Xmas Price
• Slim, compact and €18.95 exc
VAT €69.95 exc
VAT
SAVE
€82.19
SAVE
lightweight design.
• Features spindle
€22.27 inc
VAT 37%
inc
VAT 36%
lock for simple
and quick disc 12V Cordless 75mm Polisher
changes. • Slim, compact and lightweight design.
• Easily • Features variable speed on/off control.
adjustable • Spindle lock for simple and
disc guard. quick pad changes.
• Soft grip handles for
added comfort and control.
• 12V 100mm Angle • 12V 100mm Angle Grinder, • 12V 75mm Polisher,
Grinder (No accessories). Battery & Mains Charger Kit. • 12V 75mm Polisher (No accessories). Battery & Mains Charger Kit.
• Model No. CP4004 • Model No. CP40COMBO14 • Model No. CP4005 • Model No. CP40COMBO15
• RSP Price €71.45 • RSP Price €175.35 • RSP Price €64.95 • RSP Price €168.85
Xmas Price Xmas Price Xmas Price Xmas Price
€34.95 exc
VAT
SAVE
€84.95 exc
VAT
SAVE
€31.95 exc
VAT
SAVE
€81.95 exc
VAT
SAVE
€41.07 inc
VAT 36% €99.82 inc
VAT 37% €37.54 inc
VAT 36% €96.29 inc
VAT 37%
Batteries, Charger & Bag 9pc Cordless
Lithium-ion
Power Tool
Kit
• Comprehensive kit
includes one of each
SAVE
UP TO Cordless Power Tool,
39% Mains Charger, 2 x
Li-ion Batteries and
Model No. Description RSP Xmas Price Xmas Price Canvas Bag.
Price Exc VAT Inc VAT • Model No.
CP40COMBO3
CP40MC 1 Hour Lithium-ion 12V Mains Charger €27.95 €32.84
€51.95 • RSP Price €477.95
for CP4000 Range
CP40BP 12V Lithium-ion Battery for CP4000 Range €51.95 €24.95 €29.32
Xmas Price
CP40BPX2 12V Lithium-ion Battery for CP4000
Range Pack of Two
€103.90 €48.95 €57.52
€199.95 exc
VAT
SAVE
CP40CB Canvas Bag for CP4000 Cordless Range €16.85 €9.95 €11.69 €234.94 inc
VAT 46%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 29
19.2V 1/2"Sq Drive Cordless Impact 24V 1/2"Sq Drive Cordless Impact 24V 1/2"Sq Drive Cordless Impact
Wrench 200lb.ft Wrench 325lb.ft Wrench 410lb.ft
• Powerful, • Up to 550Nm
compact (410lb.ft)
cordless torque,
impact wrench. makes this
• Forward, tool suitable
reverse and trigger for removing the most
lock control integrated • Powerful, compact
stubborn wheel nuts.
into housing for cordless impact wrench.
• Forward and reverse
ease of use. • Forward and reverse control
control integrated into
• Maximum Torque: integrated into housing for
housing for ease of use.
271Nm(200lb.ft). ease of use.
• Superbly balanced
• Superbly balanced • Produces in excess of 441Nm
tool with side handle
tool with vibration (325lb.ft) of torque - enough
and vibration
reducing grip. to remove wheel nuts.
reducing grip.
• Suitable for workshop • Superbly balanced tool with
• One of the most
applications. side handle and vibration
powerful cordless impact
• 19.2Volt Ni-Cad battery reducing grip.
wrenches available
pack and 1 hour charger. • Suitable for workshop
on the market.
• Model No. CP1920 applications.
• Model No. CP2450
• RSP Price €311.95 • 24Volt Ni-Cd battery pack
• RSP Price €441.95
and 1 hour charger.
• Model No. CP2400
FREE • RSP Price €389.95 FREE SAVE FREE
Second Battery Second Battery 31%
13pc 1/2"Sq Drive
• Model No. • Model No.
Impact Socket Set Metric
Xmas Price •
CP1920BP
RSP Price Xmas Price •
CP2400BP
RSP Price
€129.95
Xmas Price •
•
Model No. AK5613M
RSP Price €35.05
€154.95 €179.95 €234.95
€110.45
exc exc exc
VAT VAT VAT Second Battery
SAVE SAVE • Model No. CP2450BP
€182.07 inc
VAT 35% €211.44 inc
VAT 40% €276.07 inc
VAT
• RSP Price
€142.95
80kg Wheel Removal-Lifter 500kg Wheel Removal 2tonne Jacking Beam with
Trolley with Rocket Lift Trolley 1.6mtr Extending Arms
• Long reach bottle NEW & Flat Roller Supports
jack type mechanism.
• Features Rocket Lift to reduce
the time and effort needed
to raise arms to contact point.
• Steel construction with friction
mounted roller arms.
• Front and rear castors
for easy manoeuvrability.
• Adjustable width, 300
or 360mm between rollers,
gives greater flexibility.
• Supplied with safety bar
to prevent wheel from
tipping forward. • Fully certified and approved to comply with VOSA requirements.
• Model No. WD80 • Two-stage mechanical safety lock and telescopic finger guards.
• RSP Price €480.95 • Spring loaded flat arms with roller bearings.
• Long reach bottle jack type mechanism.
• Optional hook arms supplied.
• Steel construction with bearing mounted roller arms.
• Supplied with two pairs of
• Supplied with safety chain.
aluminium support blocks.
• Fitted with three nylon swivel castors.
• Model No.
• Model No. W52T
SJBEX200 FREE
• RSP Price €831.95
• RSP Price €1117.95 36 LED Cordless Lithium-ion
Rechargeable Inspection Lamp
• Model No. LED013
Xmas Price Xmas Price Xmas Price • RSP Price €77.95
€239.95 exc
VAT
SAVE
€449.95 exc
VAT
SAVE
€499.95 exc
VAT
SAVE
€281.94 inc
VAT 35% €528.69 inc
VAT 30% €587.44 inc
VAT 42%
Magnetic Camber/Castor Gauge Laser Wheel Alignment Gauge Coil Spring Compressing
Station Air/Hydraulic
1500kg Capacity
• 1500kg Capacity air actuated
hydraulic unit with alternative foot
operation.
• Quicker and easier than using
ratchet driven spring compressor.
• Plastic coated yokes reduce
the risk of spring
slippage/damage.
• Suitable for springs from
Ø102mm to Ø160mm.
• Model No. RE232
• Robust, magnetic gauge mounts onto hub or brake disc. • Optical system uses low radiation laser beam to indicate
• RSP Price €454.95
• Quick and accurate measurement of camber and castor toe-in or toe-out.
angles. • Single leg configuration and reversible contact probes
• Large adjuster knob for convenient zeroing of bubble allow on-ramp use.
during castor angle measurement. • Works on practically all cars and light commercials with
• Graduated from +6° to -6°. rim diameters from 200 to 600mm.
• Supplied in carry-case. • Powered by 2 x AA cells
• Model No. GA45 and includes operating
• RSP Price €62.35 instructions.
FREE • Model No. GA50 FREE
Digital Tyre Tread Depth Gauge • RSP Price €909.95 EOBD Code Reader
• Model No.
• Model No. VS0564 VS8699
RSP Price €22.05
Xmas Price •
Xmas Price • RSP Price
€84.45
Xmas Price
€32.95 exc
VAT
SAVE
€399.95 exc
VAT
SAVE
€209.95 exc
VAT
SAVE
€38.72 inc
VAT 31% €469.94 inc
VAT 43% €246.69 inc
VAT 40%
30 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Sandblasting Gun Economy Type Air Recirculating Economy Sand Shot Blasting Kit
Bulk Pick-Up with 4.5mm Nozzle Blasting • Compact and portable
shot blasting kit.
Kit • Large capacity hopper with
convenient carry handle
and integral hose storage.
• Suitable for • Supplied with 4.5mtr of grit
• Suitable for
use in the hose and fitted with a
cleaning
bodyshop. heavy-duty shot
larger areas.
• Feathering blasting gun.
• Features a
action makes • Model No. SB993
reduced diameter
it ideal for • RSP Price €90.95
nozzle for use with
treating
smaller compressors.
stone chips.
• Accepts a variety of abrasives including sand, chilled
• Supplied with a set of four
iron grit and other proprietary types of beading.
rubber nozzles and a
• Model No. SSG9E
700g bottle of blasting grit.
• RSP Price €44.15
Xmas Price Xmas Price • Model No. SG10E
• RSP Price €51.95
Xmas Price
€19.95 exc
VAT
SAVE
€19.95 exc
VAT
SAVE
€43.95 exc
VAT
SAVE
€23.44 inc
VAT 41% €23.44 inc
VAT 50% €51.64 inc
VAT 37%
Shot Blasting •• Compact and portable shot blasting kit.
Large capacity hopper with handle and heavy-duty Shot Blasters with • Pressured tank for maximum power.
• Supplied with 2.4mtr rubber hose, four ceramic nozzles
Kits •
rubber wheels for easy manoeuvrability.
Supplied with 3.0mtr grit hose, fitted with a
Water Trap & Wheels and in-line water trap for moisture-free grit blasting.
• Also includes bayonet air
heavy-duty shot blasting gun and four ceramic line coupling and air flow
22.6kg nozzles. 46kg regulator.
• Model No. SB994 • Model No. SB997
• RSP Price €121.50 • RSP Price €259.95
Xmas Price Xmas Price
€69.95 exc
VAT
SAVE
€139.95 exc
VAT
SAVE
€82.19 inc
VAT 25% €164.44 inc
VAT 30%
40kg 92kg
• Model No. SB995 • Model No. SB998
• RSP Price €194.95 • RSP Price €324.95
Xmas Price Xmas Price
€109.95 exc
VAT
SAVE
€169.95 exc
VAT
SAVE
€129.19 inc
VAT 27% €199.69 inc
VAT 32%
Shot Blast Cabinet with Gun Shot Blasting Cabinet Double Access
625 x 490 x 490mm 690 x 575 x 620mm
• Heavy-duty steel cabinet with toughened
glass viewing screen with integral low
• Bench-top mounting voltage illumination.
cabinet with gun. • Two large side doors provide easy
• Designed for use with access for bulkier items and
glass beading or plastic includes Ø34mm dust extraction
granular mediums. port for a clear view.
• Delivered assembled • Overall Size (W x D x H):
and ready for use. 690 x 575 x 620mm.
• Overall Size (W x D x H): • Heavy gauntlets provide hand
625 x 490 x 490mm. protection and cabinet is supplied
• Model No. SB951 with sand blasting gun with
• RSP Price €285.95 3 spare ceramic nozzles.
• Model No. SB970
• RSP Price €454.95
Xmas Price Xmas Price
€139.95 exc
VAT
SAVE
€199.95 exc
VAT
SAVE
€164.44 inc
VAT 36% €234.94 inc
VAT 43%
Shot Blasting Cabinet with Gun Shot Blasting Cabinet
760 x 510 x 710mm 890 x 570 x 1380mm
• Heavy-duty steel cabinet, toughened
• Steel cabinet with replaceable glass viewing screen and integral low
viewing screen and internal voltage illumination.
illumination. • Large side door provides easy
• Fitted with shot blasting gun access for bulkier items.
and suitable for proprietary • Ø60mm Dust extraction port.
brands of glass beads, silicon • Heavy gauntlets provide hand
carbide, aluminium oxide and protection and cabinet is supplied with
silica sand only. sand blasting gun, four ceramic
• Overall Size (W x D x H): nozzles and five visor covers.
760 x 510 x 710mm. • Overall Size (W x D x H):
• Model No. SB972 890 x 570 x 1380mm.
• RSP Price €558.95 • Model No. SB973
• RSP Price €740.95
Xmas Price Xmas Price
€254.95 exc
VAT
SAVE
€299.95 exc
VAT
SAVE
€299.57 inc
VAT 41% €352.44 inc
VAT 47%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 31
Professional Suction HVLP Gravity Feed HVLP Gravity Feed Spray Gun
Feed Spray Gun 1.8mm Touch-Up Spray Gun 1.4mm Set-Up
• Round/flat fan control allows spray
Set-Up 0.8mm Set-Up pattern to be adjusted for any job.
• High quality, professional spray • Ideal for blowing-in small areas • Anodized spray gun body resists
gun ideal for automotive refinishing. of panel where fine control corrosion and makes for easier
• Suitable for a wide of paint and air is necessary. cleaning.
range of materials. • Anodized spray gun body resists • Brass air cap with stainless
• Standard Set-Up: 1.8mm. corrosion and makes for easier steel needle and nozzle
• 1.5mm and 2.0mm cleaning. make this HVLP gun
Set-ups available. • Brass air cap with stainless steel suitable for water based paint.
• Supplied with cam needle and nozzle make this HVLP • 1.2, 1.3, 1.7 and 2.0mm
action suction pot. gun suitable for water based paint. set-ups available separately.
• 1.0mm set-up available separately. • Model No.
• Model No. S701
• RSP Price €97.45 • Model No. HVLP731 HVLP741
SAVE SAVE • RSP Price €64.95 SAVE • RSP Price €103.95
27% 50% 59%
Xmas Price FREE Xmas Price FREE Xmas Price FREE
Professional Gravity 5pc Mini Brush Magnetic Spray Gun
€54.95 exc
VAT Feed Spray Gun
1.4mm Set-Up
€24.95 exc
VAT Spray Gun
Cleaning Set
€32.95 exc
VAT Holder
€64.57 inc
€29.32 inc
€38.72 inc • Model No. MSH01
• Model No. S701G • Model No. BSGC4
VAT VAT VAT • RSP Price €12.95
• RSP Price €90.95 • RSP Price €6.45
150mm Random Orbital 150mm Lightweight Polisher 170mm 6-Speed Sander/Polisher
Dual Action Sander 230V 800W/230V 1300W/230V
• Alloy bevel gear • Features variable • 1300Watt
head with smooth speed control Professional
composite ranging from sander/
motor 0 to 2800rpm. polisher.
housing • Two level • 6 Position
for added gear electronic
comfort. system variable
• Side reduces output speed, still maintaining a high torque level. speed control.
mounted • Alloy bevel gear head with composite motor housing. • Maximum Load Speed: 3000rpm.
slider • Spindle lock for easy pad removal. SAVE • Supplied with side handle, backing
type • Supplied with Ø150mm hook-and-loop backing 25% pad and disc spanner.
power pad, polishing bonnet • Model No.
control and side handle. FREE MS900PS SAVE
33%
with • Model No. ER1700P
power lock. • Supplied with Ø150mm • RSP Price €129.95
150 x 50mm Hook & Loop
Buffing & Polishing Foam
• RSP Price
€175.45
FREE
pad and side handle. Head Red/Ultra Soft 150 x 50mm Buffing &
Polishing Foam Head
Xmas Price • Model No. DAS150T
• RSP Price €233.95
Xmas Price •
•
Model No. PTCCHV150R
RSP Price €13.60 Xmas Price M14 Blue/Medium
• Model No. PTC/CH/M14-B
€99.95 exc
VAT
SAVE
€74.95 exc
VAT Bonnet/Foam Head
Cleaning Tool
€89.95 exc
VAT
• RSP Price €11.00
Bonnet/Foam Head
€117.44 €88.07 €105.69
inc inc inc Cleaning Tool
• Model No. PTCCT
VAT 44% VAT • RSP Price €120.95 VAT
•
•
Model No. PTCCT
RSP Price €12.95
20pc Spray Gun Air Operated Panel Dryers Infrared Panel Dryer Short Wave
Cleaning • Designed for drying water 1000W/230V with Floor Stand
based paints. • Designed and developed to assist with
Set • Operates on any number of small drying processes.
Model No. SDA03
workshop air • Ideal for spot repairs, engine drying,
supply. adhesive stripe removal, drying filler,
• Adjustable airflow. drying primer or just preheating prior
• Ideal for localised to spraying.
or spot repair. • Fitted with a powerful 1000W short
• Filter prevents
Model No. SDA01
• Comprehensive wave infrared lamp.
cleaning set with airborne particles • A sturdy 1870mm chrome plated stand.
contaminating paint
a range of soft,
medium, hard and
NEW surface.
• Combines the features of a flexible
hand-held heater, with the benefits of a
brass bristle brushes. • Hand-held or mount on free-standing panel dryer.
SAVE
• Includes precision brush/probe sets and lubricant. optional Double Support UP TO • Full height ‘slide and lock’ heater bracket.
• Suitable for various applications, particularly spray guns Stand Model No. SDAST. 48% • Model No. IR1000COMBO
after use.
Model No. RSP Xmas Price Xmas Price • RSP Price €464.65
• Model No. Price Exc VAT Inc VAT
Xmas Price BSGC5 Xmas Price
€14.95 exc
VAT
SAVE
• RSP Price
€35.70 SDA01 €70.15 €27.95 €32.84 €229.95 exc
VAT
SAVE
€17.57 inc
VAT 46% SDA03 €38.95 €15.95 €18.74 €270.19 inc
VAT 36%
Spray Gun Cleaning Tanks Panel Drying Kit
• Suitable for containing water and detergent • Combo includes Sealey Short Wave Infrared
necessary for cleaning water based spray Panel Dryer (Model No: IR1000), Air Panel
guns. Drying Stand/Air Dryers (Model No’s:
• Fully automatic operation - close lid to start SDAST & SDA01 x 2) and Mounting Bracket
and open lid (Model No. SDA04).
to stop. • Fully adjustable height and dryer angle.
• Powerful and • Adjustable air flow.
reliable piston • IR1000 Fitted with a powerful 1000W short
pump system. wave infrared lamp.
• Supplied with coiled air hoses and fittings.
• Suitable for drying water-based paints.
• Used together drying time is accelerated,
SAVE increasing turnaround on repairs.
UP TO • Ideal for use in professional Body Shops.
50% • Model No. SDACOMBO3
• RSP Price €699.15
Model Gun RSP Xmas Xmas
No. Capacity Price Price Price
Exc VAT Inc VAT Xmas Price
SM24/1 1 €909.95 €359.95 €422.94 SM23/2 €299.95 exc
VAT
SAVE
€352.44
Illustrated
inc
SM23/2 2 €1039.95 €399.95 €469.94 VAT 44%
32 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
9pc Slide 10pc Heavy-Duty Slide Dust-Free Sanding NEW
Hammer Kit Hammer Kit Blocks
• Heavy-duty slide hammer
with 4.4kg sliding weight. • Hook and loop
• For use on body foam pad
panels and with
vehicle fibreglass
• Slide chassis. backing
hammer plate.
kit with • Mounted
2.3kg with a ted)
lustra
011 Il
sliding
weight.
NEW foam/ABS grip
incorporating a Ø28mm
(RE4
• Comfortable outlet for connection to an extraction system. SAVE
rubber grip • Supplied with various • Suitable for use with popular dust-free sanding UP TO
handle for • Supplied in super tough attachments in tough sheets. 40%
added control. carry-case with storage storage carry-case. Model Size RSP Xmas Xmas
for set of attachments. • Model No. DP90 No. Price Price Price
Xmas Price • Model No. DP9/5B Xmas Price • RSP Price €194.95 Exc VAT Inc VAT
• RSP Price €55.85
€29.95 exc
VAT
SAVE
€82.95 exc
VAT
SAVE
RE4011 70 x 125mm €19.45 €8.95 €10.52
€35.19 inc
VAT 30% €97.47 inc
VAT 45% RE4012 70 x 198mm €20.75 €9.95 €11.69
Wall Mounting Folding 7pc Drop-Forged Panel Beating Wheel Skate Hydraulic
Bumper Rack Set with Hickory Shafts 650kg Capacity
• Steel chassis with
• Suitable • Polished, drop-forged
PVC rollers and four
for holding steel dollies.
Ø100mm PU
up to three • Professional
castors,
bumpers hickory
two
of various handled
fitted
lengths for hammers.
with
tidy workshop • Supplied
brakes.
storage. in tough
• Capacity:
• Arms mountable storage
650kg.
in eight positions case.
• Maximum Opening:
and safely fold • Model No.
CB507 625mm.
away when
• RSP Price • Maximum Tyre
not in use,
€109.15 Profile: 250mm.
saving space. • Note: Sold as singles,
• Weight: 17kg.
but must be used in pairs.
Xmas Price • Ideal for the busy
Xmas Price Xmas Price • Model No. WS650
• RSP Price €194.95
€64.95 exc
VAT
SAVE
bodyshop.
• Model No. MK56
€59.95 exc
VAT
SAVE
€99.95 exc
VAT
SAVE
€76.32 inc
VAT 50% • RSP Price €168.95 €70.44 inc
VAT 29% €117.44 inc
VAT 33%
Panel Stand - Door, Wing, 10tonne Straightener Kit
Bonnet & Bumper with Variable Upright
• Features fully adjustable arms to fit many
styles of bonnets, wings, doors and bumpers.
• Main frame can adjust 180°, to give required angle. • Fully interchangeable parts and hydraulics.
• Fitted with two fixed Ø180mm wheels and • Variable position upright allows six pre-set angles of pull
two braked Ø125mm castors for easy plus a seventh upright position.
manoeuvrability. • Supplied as standard with SuperSnap® manual hydraulic
• Model No. MK51 pump and ram.
• RSP Price €298.95 • Supplied with 2 x Pull Clamps, 2 x Sill Clamps, 2 x Chains,
2 x Chain Hooks, Carriage Anchorage Tube, 2 x Tube
Stands.
• Model No. DZRE92/C
• RSP Price €1169.95
Xmas Price
€129.95 exc
VAT
SAVE
€152.69 inc
VAT 43%
10tonne Hydraulic
Body Repair Kit
FREE
Professional Suction Feed 170mm 6-Speed Sander/Polisher
Spray Gun 1.8mm Set-Up 1300W/230V
• Model No. S701 • Model No. MS900PS
• RSP Price €97.45 • RSP Price €175.45
SAVE
23%
• Tough steel components, with threaded
connectors to interchange easily.
Xmas Price • SuperSnap® pipework for quick connections. Xmas Price
€199.95 exc
VAT
SAVE
• Connecting parts zinc/cadmium plated for long life.
• Supplied in blow moulded case. €689.95 exc
VAT
€234.94 inc
VAT 33% • Model No. RE83/10
• RSP Price €389.95 €810.69 inc
VAT
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 33
Video Borescope Ø8.5mm 46pc Radio Release Master Set
• Quick and most • Comprehensive set of high
cost effective solution, quality tools for release
ideal for the and removal of car radios.
inspection of engines, • Heavy-gauge materials with
machinery, buildings chrome finish ensure tools
and infrastructure. will not distort
• Image displayed on a in normal use.
crystal clear, 60mm • Supplied in foam
high resolution colour lined aluminium carry-case.
LCD display with • Model No. VS8043
on-screen • RSP Price €168.95
horizontal/vertical flip
features for use with
side-view mirrors.
• CMOS camera with NEW
adjustable LED for fine Xmas Price FREE
control of light output
and clear pictures. €89.95 exc
VAT
SAVE
Auto Probe 6-24V
with 4.5mtr Cable
€105.69 inc • Model No. PP1
• Suitable for internal inspection of 31% RSP Price €71.45
VAT •
cylinder head bores and
vehicle compartments/components.
• Model No. VS8196
• RSP Price €285.95
Available End 6/12/24V Circuit Tester
Of October
Simulated image with Polarity Test
• Continuity and polarity tester
for 6, 12 and 24Volt systems.
Xmas Price • Positive/negative polarity indicated
€159.95 exc
VAT
SAVE
by red/green LEDs respectively.
• Supplied with 1.5mtr cable
€187.94 inc
VAT 27% Simulated image and shrouded earth clip.
• Model No. AK4030
• RSP Price €15.95
Video Borescope NEW
Ø5.5mm
• Capable of displaying and storing
both video and still images on internal or Xmas Price
external memory card.
• Crisp images displayed on 89mm high
€8.95 exc
VAT
SAVE
resolution colour TFT LCD display with
digital zoom control and horizontal/vertical
€10.52 inc
VAT 44%
flip features for use with side-view mirrors.
• CMOS camera with adjustable 4 x LED
array allows fine control of
light output and clearer pictures. Radiator Pressure
• SD Memory slot, USB and AV out slots
ensure that the images can be Test Kit
easily transferred between the scope • Aluminium radiator header tank
and other devices. caps colour coded for ease of use
• Suitable for internal inspection of cylinder head and with quick release fittings.
bores and vehicle compartments/components. • Suitable for wide range of vehicle
• Ideal, for the close inspection of engines, applications and for locating leaks
machinery, buildings and infrastructure. from: head gasket, header tank,
• Powered by internal lithium-ion battery pack radiator and heater cores, water pump,
giving up to 5 hours continuous use. plugs, hoses and housings.
• Model No. VS8197 • Long hose aids gauge use and quick
• RSP Price €285.95 release is fitted with pressure release
valve for safe operation.
• Model No. VS006
• RSP Price €363.95
Available End
Xmas Price Of October Xmas Price FREE
€349.95 exc
VAT
SAVE
€159.95 exc
VAT
SAVE
Remote Action
Hose Clip Tool
€411.19 inc
€187.94 inc • Model No. VS1663
VAT 30% VAT 43% • RSP Price €59.75
Simulated image
3pc Windscreen Steering Rack 13pc Alternator
Handling Kit Knuckle Tool Freewheel
Removal
Set
NEW
• Two glass
reinforced
plastic gripper
handles with
four Ø115mm • Suitable for the
lever operated fast and easy removal of the steering knuckle.
suction pads. • Fits racks with hex drive, two flats and round ends.
• Powerful suction will handle 60kg of windscreen. • Ideal for vehicles with limited access and • Easy removal of freewheel pulley from alternator either
• Supplied with ratchet tie down to fix screen in position avoids the need to remove the rack assembly. on or off the vehicle.
if required. • Suitable for steering rack knuckles • Allows alternator shaft to be held while the pulley
• Model No. WK1 with a diameter of 33 to 41mm. retainer is removed.
SAVE • RSP Price €90.95 • Model No. VS4000 • Model No. SX401
36% • RSP Price €25.95 • RSP Price €77.95
Xmas Price FREE Xmas Price Xmas Price
€44.95 €12.95 €35.95
Side Window
exc exc exc
VAT Holders - Pair VAT VAT
• Model No.
SAVE SAVE
€52.82 inc
VAT •
WK0400
RSP Price €13.60 €15.22 inc
VAT 35% €42.24 inc
VAT 40%
34 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
6-24V Auto Probe Excel Kit Cooling System Vacuum
• Comprehensive Purge & Refill Kit
6-24V DC test kit. • Dramatically reduces cooling system refill time,
• Find bad earths, breaks in without mess and without introducing air-locks.
continuity and short circuits • No more time consuming
quickly and easily. cooling system bleeding
• Can even power up and no more messy
components on and off the vehicle. spills to clean up.
• Kit includes flexi extension cable, • Simply plug into the
crocodile clip, wire probe workshop air line, attach to
and back-probe. the cooling system header
• Model No. PPLK tank and create a vacuum.
• RSP Price €74.05 • Model No. VS0042
• RSP Price €103.95
SAVE SAVE
30% 29%
Xmas Price FREE Xmas Price FREE
€39.95 exc
VAT
1 LED Headband Torch
• Model No.
€56.95 exc
VAT
3pc Composite Hose
Pinch Tools Set
€46.94 €66.92
• Model No. VS0300
inc HT01LED inc • RSP Price €38.95
VAT • RSP Price €14.25 VAT
Diesel Injection Leak Back Master On-Car Hydraulic
Kit - Bosch/Delphi/Denso Pipe Flaring Tool Set
• Designed to measure return fuel
flow on diesel vehicles up to • Produces accurate
6 cylinders fitted with automotive SAE and DIN
common rail injection system. flares on 3/16" and
• Identifies, worn, blocked or 4.75mm pipes respectively.
inoperative injectors • Small body makes it ideal
quickly and easily. for splicing in replacement
• Contains measurement tubes sections of brake
for short term tests and pipe on-vehicle.
measurement bottles for long • Features a hydraulic
term, more accurate evaluation. ram which also makes it
suitable for steel pipes.
• Model No. VS2048
SAVE • RSP Price €228.75
• Model No. PFT10
• RSP Price €24.95
NEW
36%
Xmas Price FREE Xmas Price FREE
Pneumatic
€112.95 exc
VAT
Auto Probe 6-24V
with 4.5mtr Cable €169.95 exc
VAT
SAVE
Vacuum Brake
Bleeder - 0.75ltr
€132.72 inc
€199.69 inc
• Model No. PP1 • Model No. VS020
VAT • RSP Price €71.45 VAT 32% • RSP Price €64.95
Electronic Parking Brake Service Tool Oil Filter Cap Wrench Set 30pc
• Suitable for the safe and professional replacement
• Extensive set designed for
of brake pads on vehicles fitted with an
a wide range of vehicles.
electronic (push-button) parking brake.
• Cap type filter wrenches, made from
• Plugs into the vehicles EOBD socket.
7 and 16 gauge steel, will
• Easy to use with only two buttons, the unit reads
withstand up to 85lb.ft torque.
and clears EPB fault codes as well as
• Designed to grip like sockets,
displaying the status of the braking system.
thereby minimising the possibility
• Rugged aluminium case and heavy-duty cable
of crushed filters.
protection ensures workshop/tyre shop durability.
• Adaptor allows use with 3/8" or
• Unit supplied pre-loaded with software for Audi;
1/2"Sq drive wrenches.
New A4 & A5, A6 & A8, Mercedes; W211, R230,
• Adjustable oil filter wrench Ø65-120mm.
C219, VW; Passat.
• Supplied in carry-case.
Unit updateable.
• Model No. VS7006
• Model No. VS8621
• RSP Price €188.45
FREE • RSP Price €189.75
14pc Brake Piston
Wind Back Tool Kit
Xmas Price •
•
Model No. VS0281
RSP Price €116.95 Xmas Price FREE
€109.95 exc
VAT €99.95 exc
VAT
SAVE
6pc Double End
Drain Key Set
€129.19 €117.44
inc SAVE inc • Model No. AK659
VAT 24% VAT 32% • RSP Price €25.30
7mm Locking Hose Clip Nut Drivers
• Innovative design aids the
tightening/loosening of hose clips and
ensures faster and easier work
in confined spaces.
• Comfortable, high-grip,
textured handle
and a simple lever
type lock/unlock
feature enables a
one handed
SAVE
operation. UP TO
41%
Model No. Shaft Length / RSP Xmas Price Xmas Price
Overall Length Price Exc VAT Inc VAT
VS0651 75mm / 185mm €19.45 €8.95 €10.52
VS0652 175mm / 285mm €22.05 €9.95 €11.69
VS0653 380mm / 490mm €32.45 €14.95 €17.57
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 35
Tyre Spreader 2tonne Yankee Wide Arm
with Stand - Manual Low Profile Jacking Beam
• Floor standing unit
for spreading vehicle
tyres before carrying out repairs.
• Features rollers to
rotate the tyre to the
correct position and fully
adjustable platform.
• Suitable for most cars and
light commercial vehicles.
• Model No. TC970 NEW
• RSP Price €207.95
FREE • Low profile design permits use on lifts mounted in pits and commonly used in ATLs.
• Also permits use on vehicles with low ground clearance.
• Fitted with large diameter roller support arms
500mm Tyre Lever
for use on lifts with inner rail type configuration.
• Model No. VSTL500
• RSP Price €14.25 • Ultra wide configuration arms extend to 1.65mtr and feature adjustable
saddles with interchangeable height posts (optional).
• Model No. SJBEX200LP
• RSP Price €1429.95
Xmas Price Xmas Price FREE
€119.95 exc
VAT
SAVE
€649.95 exc
VAT
SAVE
60mm Extension
Lift Adaptor (Pair)
€140.94 inc
€763.69 inc • Model No. SJBEXLP060A
VAT 25% VAT 41% • RSP Price €64.95
Headlamp Beam Setter - Compact VAG Code Reader & Reset
• Ideal for the garage or bodyshop where space is limited. Tool - EOBD & Generic
• Fitted with aiming screen used in our VOSA
• Suitable for VAG vehicles including
approved units, this beam setter is suitable for pre-MOT
those with Controller Area Network (CAN)
inspection and fulfils the legal obligation of the garage or
protocol.
bodyshop to return vehicles to the customer in
• Back-lit LCD display with simple to
roadworthy condition.
follow menu-driven software.
• Compact design includes shortened mast and
• Reads and clears DTCs for engine, ABS,
view-through aiming device.
airbags, transmission, radio, climate
• Suitable for all types of cars and
control (A/C), steering wheel
light commercial vehicles.
and immobilizer vehicle modules.
• Model No. HBS2010
• Resets oil service light (including Long
• RSP Price €779.95
Life), retrieves vehicle information (VIN),
displays I/M readiness status and OBDII
freeze frame data.
• Turns off malfunction
indicator lamp (MIL) for
engine, airbag, ABS and
automatic transmission.
• Supplied in handy-case
with EOBD and USB
cables.
• Applications:
Audi, Seat, Skoda, VW.
• Model No. VS862
• RSP Price €337.95
Xmas Price Xmas Price FREE
€399.95 exc
VAT
SAVE
€174.95 exc
VAT
SAVE
Auto Probe
Plus 6-24V
€469.94 inc
€205.57 inc • Model No. PPX
VAT 33% VAT 33% • RSP Price €90.95
29pc Air Operated Brake 14pc Diesel Injector
Wind-Back Tool Kit Puller Set
• Air operated
wind-back tool
suitable for left or right
hand wind-back operations.
• Fast, lightweight
and easy to use.
• Master set of adaptors suit a
wide range of
NEW
vehicle applications.
• Suitable for push-back and
wind-back brake pistons.
• Left-handed thrust required for
• Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.
Ford, Citroen and Renault applications.
• Ball joint allows hammer to be used in confined areas.
• Interchangeable adaptor plates with
• Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors
thrust bolt assembly and reaction plate.
for attaching the slide hammer securely to the body of the injector.
• Includes 3/8"Sq drive adaptor and
• Supplied in carry-case.
2-pin magnetic adaptor for added flexibility.
• Contents: Slide Hammer, 4pcs 1/2" Sockets, 25, 27, 29 and 30mm, Tamper Proof Key,
• Kit helps prevent damage to pistons and seals.
5pc Adaptor (Bosch, Delphi, Denso, Siemens), Ball Joint.
• Model No. VS0286
• Model No. VS2059
• RSP Price €311.95
• RSP Price €292.45
Xmas Price FREE Xmas Price
€129.95 exc
VAT
SAVE
Auto Probe
Plus 6-24V €149.95 exc
VAT
SAVE
€152.69 inc
€176.19 inc
• Model No. PPX
VAT 46% • RSP Price €90.95 VAT 33%
36 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
6pc Diesel Injector 5ltr EOBD Code Reader
Seat Cleaner Workshop • The VS8699 works
with all 1996 and
Set Vacuum later OBDII / EOBD
compliant
Brake & vehicles.
• This easy to
Clutch use tool will
Bleeder retrieve/clear
generic and
manufacturer
Diagnostic
Trouble
Codes (DTC).
• One-man • Supplied with a
operation comprehensive
using standard instruction and
workshop air code reference
Before After supply manual.
• Set of four diesel injector seat cleaners, centring pilot and (90-120psi). • Model No. VS8699
T-handle. • Large capacity reservoir for the busy workshop. • List Price £64.95
• Used to clean/decarbonise injector seats when changing injectors. • Vacuum gauge for accurate vacuum application.
• Helps to avoid blow-back due to poorly • Long lasting silicon rubber
seated injectors. hose for ultra flexibility.
• Model No. VS2055 • Model No. VS0202
• List Price £119.95 FREE • List Price £124.95 FREE FREE
11pc Combination 3pc Composite Hose Auto Probe 6-24V
Spanner Set - Metric Pinch Tools Set with 4.5mtr Cable
Xmas Price •
•
Model No. S0562
List Price £26.95 Xmas Price •
•
Model No. VS0300
List Price £29.95 Xmas Price •
•
Model No. PP1
List Price £54.95
£79.95 exc
VAT £79.95 exc
VAT £43.95 exc
VAT
£93.94 £93.94 £51.64
inc SAVE inc SAVE inc SAVE
VAT 33% VAT 36% VAT 32%
Infrared Laser Digital Steering Rack Knuckle Tool 4pc 3/8"Sq Drive T-Bar & Rubber
Thermometer 8:1 470mm Insert Spark Plug Socket Set
• Fast and simple way to
find engine and
vehicle faults.
• Detects energy emission
in the infrared spectrum
and converts reading into
a display of temperature.
• Features laser pointer to
indicate area
being sampled. NEW
• Temperature is displayed
on large LCD panel.
• Temperature can be
shown in either °C or °F.
• Powered by two AAA • Suitable for the fast and easy removal/installation of • Comfort grip T-handle 3/8"Sq drive.
cells (not included). the steering knuckle. • Features 2-in-1 wobble and rigid bar.
• Model No. VS904 • Designed to fit over the steering shaft onto the • Simply push the socket further onto
• List Price £59.95 steering rack. the bar to fasten in the rigid position.
• Fits racks with hex drive, two flats and round ends • Supplied with 14mm Bi-hex, 16 & 21mm 6-point Chrome
with a diameter of 35 to 42mm. Vanadium spark plug sockets with rubber inserts.
SAVE • Model No. VS4001 • Model No. AK6550
40% • List Price £109.95 • List Price £25.95
Xmas Price FREE Xmas Price Xmas Price
£35.95 £69.95 £16.95
exc Ethylene Glycol exc exc
VAT Antifreeze Tester - Disc Type VAT VAT
SAVE SAVE
£42.24 £82.19 £19.92
• Model No. AK4120
inc • List Price £12.95 inc inc
VAT VAT 36% VAT 35%
Vacuum & Fuel Pump 10pc Petrol Petrol Engine Cylinder
Pressure Test Compression Leakage Tester
Gauge Set Test Kit 2-Gauge
• Designed to detect a
variety of common engine faults
including: Worn piston rings, worn valves,
cylinder head cracks and blown head gaskets.
• Ø59mm Gauge fitted with 250mm hose and quick connect. • Gauges show % of cylinder
• Ø80mm Gauge with protective • Scale reads from 0-21bar(0-300psi). leakage and cylinder pressure.
rubber bumper and hanging hook. • Includes four extension hoses and seven plug thread • Suitable for use with any petrol vehicle
• Checks for leaks in fuel line, adaptors from 10 to 18mm. with 10, 12 or 14mm spark plugs.
vacuum chokes and heating. • Suitable for most petrol engined cars and light • Supplied in carry-case with instructions.
• Includes long flexible hose and adaptors. commercials. • Model No. VSE2020
• Supplied in storage case. • Model No. VSE206 • List Price £119.95
• Model No. VSE952
• List Price £19.95
FREE • List Price £99.95 FREE FREE
Spark Plug HT Tester 6/12/24V DC Long Probe Petrol Engine
Heavy-Duty Circuit Tester Compression Test Kit 3pc
Xmas Price •
•
Model No. VS5262
List Price £5.95 Xmas Price •
•
Model No. AK4005
List Price £18.95 Xmas Price •
•
Model No. CT951
List Price £25.95
£14.45 exc
VAT £65.95 exc
VAT £49.95 exc
VAT
£16.98 £77.49 £58.69
inc SAVE inc SAVE inc SAVE
VAT 28% VAT 34% VAT 58%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 37
Cabinet Boxes Compartment NEW
NEW Assortment Boxes
• Tough impact resistant polypropylene
• Tough and durable assortment box with compartments.
carcass, impact • Ideal storage for various types of
resistant composite small, medium or large
drawers. fixings, fuses and
• Ideal for storing a components etc.
mixture of small to • Clear lid for easy
large fixings and identification
components. of contents.
• Features two single d SAVE
• Fitted with four fixing strate UP TO
20 Illu
points for wall SAVE
locking clips. APAS 35%
mounting or can just 41 UP TO
42
be used on a bench. APDC APDC 37% Model No. No. Overall Size List Xmas Xmas
Compartments (W x D x H) Price Price Price
Model No. Drawers Overall Size List Xmas Xmas Exc VAT Inc VAT
(W x D x H) Price Price Price
Exc VAT Inc VAT APAS9 9 324 x 250 x 50mm £7.45 £4.95 £5.82
APDC41 41 300 x 140 x 485mm £26.95 £16.95 £19.92 APAS20 20 390 x 300 x 61mm £12.95 £8.45 £9.93
APDC42 42 375 x 160 x 440mm £38.95 £24.95 £29.32 APAS22 22 558 x 320 x 62mm £18.95 £12.45 £14.63
18 Compartment Double 42 Compartment Double Toolboxes NEW
Sided Assortment Box Sided Assortment Box with Tote
• Tough impact resistant polypropylene
• Tough impact
resistant double sided assortment box with
Tray
polypropylene 42 compartments. • Lid features folding
assortment • Reinforced comfort grip carry
box with 18 composite handle, two flip lid AP534
removable long life organisers with two
compartments. locking fixed compartments in each.
• Ideal storage catches • Main storage compartment suitable
for various and for hand tools and small power tools, AP535
types of built-in also includes tote tray.
small fixings, carry • Two tough metal locking clasps, both SAVE
UP TO
fuses and handle. with padlock eye for extra security.
35% AP536
components etc. • Model No.
• Model No. APAS18 APAS42
• List Price £23.95
NEW • List Price £18.95 NEW Model No. Size
(W x D x H)
List
Price
Xmas Price
Exc VAT
Xmas Price
Inc VAT
Xmas Price Xmas Price AP534 500 x 240 x 248mm £22.95 £14.95 £17.57
£14.95 exc
VAT
SAVE
£12.45 exc
VAT
SAVE
AP535 495 x 230 x 250mm £31.95 £20.95 £24.62
£17.57 inc
VAT 38% £14.63 inc
VAT 34% AP536 595 x 298 x 330mm £44.95 £29.95 £35.19
Steel/Composite Toolboxes Mobile Tool
with Tote Tray & Parts Trolleys
• Heavy-duty steel/composite • Heavy gauge steel construction
toolbox with integral composite with lockable sliding top on
tote tray. smooth ball bearing runners.
• Soft grip top carry handle for • Twin drawers with heavy-duty
added comfort and recessed 35mm ball bearing slides, which
side handle for when two are locked when top is closed.
handed lifting is required. • Handle and oddments tray NEW
• Heavy-duty locking clasps at each end.
with eye for padlock • Two fixed wheels and two locking
d
strate
(not included)
for extra security.
NEW AP40
2 Illu SAVE
castors.
• Suitable for tools and parts.
UP TO
32% • Some self-assembly required.
• Overall Size: 770 x 370 x 830mm. Ball Bearing
Model No. Size List Xmas Price Xmas Price
Model No. Colour List Xmas Xmas Drawer Slides
(W x D x H) Price Exc VAT Inc VAT
Price Price Price
AP400 400 x 205 x 210mm £34.95 £23.95 £28.14 Exc VAT Inc VAT
AP401 505 x 270 x 285mm £43.95 £29.95 £35.19 AP705M Red £199.95 £134.95 £158.57
SAVE
AP402 625 x 340 x 315mm £53.95 £36.95 £43.42 AP705MB Black £199.95 £134.95 £158.57 33%
585mm Portable Toolbox NEW Floor Cabinet Floor Cabinet
• Use as an
individual storage
NEW plus Hanging Rail
unit. • Use as an individual storage unit.
• Drawers are
• Featuring two large • Featuring two large doors,
automatically
doors, two full four half shelves, one full
locked, for
shelves and base shelf, clothes hanger and
transportation,
storage. divided base storage.
when lid is
• Added security • Added security provided by
closed and
provided by cylinder cylinder lock, supplied with
feature sliding
lock, supplied with two keys.
runners for
two keys. • All steel construction,
long life
• All steel construction, stabilized by an inner cross
performance.
stabilized by an member.
• Two tough metal
inner cross member. • Size (W x D x H):
locking clasps,
• Size (W x D x H): 916 x 458 x 1830mm.
both with padlock
916 x 458 x 1060mm. • Model No. SC02
eye for extra security.
• Overall Size: • List Price £389.95
585 x 250 x 340mm.
Xmas Price • Model No. AP1003
• List Price £79.95
Xmas Price • Supplied flat packed, some
simple assembly required.
Xmas Price
£49.95 exc
VAT £159.95 exc
VAT £229.95 exc
VAT
£58.69 inc
VAT
SAVE
38% £187.94 inc
VAT
SAVE
41% • Model No. SC03
£270.19 inc
VAT
SAVE
41%
NEW
• List Price £269.95
38 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Racking Unit with 5 Shelves Racking Unit with 5 Shelves
350kg Capacity Per Level 600kg Capacity Per Level
• Fully painted steel frame with five MDF shelves.
• Fully painted steel frame with five MDF shelves.
• Z Shape beams offer added strength.
• 350kg Capacity per shelf giving a maximum
• Boltless design means no tools required
of 1750kg per rack.
to assemble.
• Can be used as a single bay rack or split into
• Clips together in minutes.
two separate
• Overall Size (W x D x H): 1216 x 460 x 1828mm.
shelf systems
• Use as a single bay full height rack or
or workstations.
split into two
• Overall Size
separate half
(W x D x H):
height storage
910 x 410 x
stations.
1805mm.
• Model No.
• Model No.
AP6548
AP6350
• List Price
• List Price £119.95
£139.95
Xmas Price Xmas Price
£74.95 exc
VAT
SAVE
£99.95 exc
VAT
SAVE
£88.07 inc
VAT 38% £117.44 inc
VAT 29%
Heavy-Duty Racking Unit with 4 Mesh Shelves Racking Unit with 3 Beam Sets
800kg Capacity Per Level 1000kg Capacity Per Level
• Designed to meet the
• Fully painted steel frame with four
requirements of the most
heavy-duty wire mesh shelves.
demanding professionals.
• Industrial structured beams offer Display material
• This shelving/racking system not included.
added strength.
is especially suited for storage
• 800kg Capacity per level gives
solutions in the workshop,
a maximum capacity of 3200kg
bodyshop, warehouse and
per rack.
agricultural environments.
• Boltless design means no tools
• Racking unit with upright
required to assemble.
frames and cross beams.
• Clips together in minutes.
• 1000kg Capacity per level.
• Suitable storage solution for
• Overall Size (W x D x H):
workshop, bodyshop, warehouse
2350 x 1000 x 2000mm.
and agricultural environments.
• Model No. AP6572 • Model No. AP3000
• List Price £289.95 • List Price £449.95
Xmas Price Xmas Price
£199.95 exc
VAT
SAVE
£269.95 exc
VAT
SAVE
£234.94 inc
VAT 31%
• Overall Size (W x D x H): 1830 x 600 x 1828mm.
£317.19 inc
VAT 40%
1.2mtr Workbench Steel Workbenches
with Drawers with 1 Drawer
• Boltless design makes the unit easy to • Supplied with a single,
assemble, with minimal tools being required. lockable drawer.
• Pegboard rear panel, plus hooks • Manufactured throughout from
for convenient tool storage. steel plate for industrial durability.
• Two half drawers, with ball bearing • Finished in red gloss
slides, and shelf below worktop. to prevent corrosion.
• Worktop: 1205 x 600mm. • Includes bottom shelf AP1015 Illustra
ted
• Capacity of Worktop & for additional storage.
Bottom Shelf: 100kg. Available in:
• 230mm Shelf above
pegboard. Ball Bearing
• Size (W x D x H
[Overall/Worktop]): Drawer Slides Model Size List Xmas Xmas
1215 x 610 x 1500/900mm. No. (W x D x H) Price Price Price
Exc VAT Inc VAT
Xmas Price AP1010 1000 x 650 x 860mm £269.95 £179.95 £211.44
£104.95 exc
VAT
SAVE
AP1015 1500 x 650 x 860mm £349.95 £229.95 £270.19
SAVE
£123.32 inc
VAT 30% • Model No. AP12600
• List Price £149.95
AP1020 2000 x 650 x 860mm £439.95 £279.95 £328.94
UP TO
36%
Heavy-Duty Workbench with Cupboard Heavy-Duty
Workbenches
• Powder coated steel
panels with 40mm with 5 Drawers
wood laminate top.
• Features lockable • Powder coated steel
cupboard with 6-pin panels with 40mm
tumbler lock and two keys. wood laminate top.
• Supplied flat packed. • Features 5 smooth
• Table Size (W x D): running tool drawers
1372 x 508mm. and open shelving for
• Working Height: 865mm. storage of larger items.
• Model No. AP2010 • Supplied flat packed.
• List Price £319.95 • Table Size (W x D):
SAVE
1372 x 508mm. UP TO
• Working Height: 865mm. 36%
Model Drawer List Xmas Xmas
No. Type Price Price Price
Xmas Price Exc VAT Inc VAT
£209.95 exc
VAT
SAVE
AP2030 Standard Drawer Runners £369.95 £239.95 £281.94
£246.69 inc
VAT 34% AP2030BB Ball Bearing Drawer Runners £419.95 £269.95 £317.19
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 39
Steel Industrial
Workbenches
• Manufactured from heavy gauge
steel and is at the top end of our
Industrial Workstations range with a weight capacity of
1000kg (evenly distributed)
• Fitted with adjustable feet to
ensure work surface is level even
• A range of industrial quality cabinets, workbenches
if your floor is not.
and accessories manufactured from heavy gauge • 40mm Thick laminate worktop is
steel which is powder coated for rust and solvent edged with double thick trim.
protection. • Optional single or two drawer unit,
vice support or back panels easily
• All cabinet drawers fitted with ball bearing slides attach converting the
with a 100kg load capacity and self locking workbench into a
mechanism to prevent inadvertent opening. workstation.
• Workbenches each have an evenly distributed
load capacity of 1000kg. • Size (W x D x H): • Size (W x D x H): • Size (W x D x H):
1500 x 750 x 850mm. 1800 x 750 x 850mm. 2100 x 750 x 850mm.
• Optional, workbench single or double drawer • Model No. API1500 • Model No. API1800 • Model No. API2100
• List Price £339.95 • List Price £369.95 • List Price £399.95
units, back panel, shelf and unique vice holder
available.
Xmas Price Xmas Price Xmas Price
• All finished in industrial blue/grey paint finish that
would look stylish in any workshop, garage or
£239.95 exc
VAT
SAVE
£259.95 exc
VAT
SAVE
£279.95 exc
VAT
SAVE
manufacturing plant. £281.94 inc
VAT 29% £305.44 inc
VAT 30% £328.94 inc
VAT 30%
Industrial Workbenches with
Back Panel & Shelf
• Professional Workbench with Back Panel Assembly & Shelving.
• Blue/Grey Industrial finish gives a robust appearance which reflects the construction of the unit.
• Shelves for Back Panels - Single shelf that can be positioned at various heights on back panel.
Must be used in conjunction with Back Panel Assembly (Model No’s API11, API12 & API13 - 1.5,
1.8 & 2.1mtr).
• Back Panel Assembly - Mounts simply onto Workbench top and supplied with two louvred panels
& two Perfo tool storage back panels (Model No’s APIBP1500, APIBP1800 & APIBP2100 - 1.5,
1.8 & 2.1mtr).
• All items available individually 1.5mtr Version
allowing you to purchase a
• Package Model No.
Xmas Price
£279.95
complete workstation exc
API1500COMB01
system or build as you go. VAT
• Total Package SAVE
• Workbench System
Comprises:
List Price £499.85 £328.94 inc
VAT 44%
1 x API11, API12 or API13
(1.5, 1.8 or 2.1mtr).
1 x APIBP1500, APIBP1800
1.8mtr Version Xmas Price
• Package Model No.
or APIBP2100
(1.5, 1.8 or 2.1mtr). API1800COMB01 £289.95 exc
VAT
SAVE
£340.69
1 x API1500, API1800 • Total Package inc
List Price £554.85 VAT 48%
or API2100
(1.5, 1.8 or 2.1mtr).
2.1mtr Version Xmas Price
• Package Model No.
API2100COMB01 £319.95 exc
VAT
SAVE
• Total Package
List Price £609.85 £375.94 inc
VAT 48%
Complete Industrial
Workstations
• Professional Garage Storage System offers a superb
combination to kit out your workshop.
• Blue/Grey Industrial finish gives a robust appearance which
reflects the construction of the unit.
• Workbenches, back panel assemblies & back panel shelves
available in 1.5m, 1.8m & 2.1m versions.
• All items available individually allowing you to purchase a
complete workstation system or build as you go.
• Workstation System Comprises:
1 x API11, API12 or API13 (1.5, 1.8 or 2.1m).
1 x APIBP1500, APIBP1800 or APIBP2100 (1.5, 1.8 or 2.1m).
1 x API1500, API1800 or API2100 (1.5, 1.8 or 2.1m).
1 x API19.
1 x API5655B.
1.5mtr Version Xmas Price
• Package Model No.
API1500COMB02 £599.95 exc
VAT
SAVE
• Total Package
List Price £1089.75 £704.94 inc
VAT 45%
1.8mtr Version Xmas Price
• Package Model No.
API1800COMB02 £659.95 exc
VAT
SAVE
• Total Package
List Price £1144.75
£775.44 inc
VAT 42%
2.1mtr Version Xmas Price
• Package Model No.
API2100COMB02 £699.95 exc
VAT
SAVE STOOL AND TOOLS
• Total Package
List Price £1199.75 £822.44 inc
VAT 42%
NOT INCLUDED
40 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Single Drawer Unit Double Drawer Unit 5 Drawer Industrial Cabinet
• All
for API Series Workbenches for API Series Workbenches drawers
run on
heavy-duty
ball bearing
drawer
slides with
a load
bearing
of up to
100kg and
fitted with
a safety
• Optional single drawer unit for our range of API Industrial • Optional double drawer unit for our range of API Industrial locking
Workbenches. Workbenches. catch to
• Supplied with fixing kit allowing unit to be securely mounted. • Supplied with fixing kit allowing unit to be securely mounted. prevent
• Drawer fitted with safety locking catch to prevent • Drawers fitted with safety locking catch to prevent inadvertent
inadvertent opening. inadvertent opening. opening.
• Drawer fitted with fixed dividers running front to back and • Drawers fitted with fixed dividers running front to back • Each drawer is fitted
then supplied with cross dividers for personal storage and then supplied with cross dividers for personal storage with fixed dividers running
layout. layout. back to front and then supplied with cross dividers for
• Supplied with high quality lock and two coded keys. • Supplied with high quality lock and two coded keys. personalized storage layout.
• Overall Size (W x D x H): 565 x 580 x 180mm. • Overall Size (W x D x H): 565 x 580 x 280mm. • Fits perfectly underneath the workbenches in this range.
• Model No. API8 • Model No. API9 • Fitted with high quality lock and two coded keys.
• List Price £119.95 • List Price £169.95 • Overall Size (W x D x H): 565 x 580 x 700mm.
• Model No. API5655A
• List Price £419.95
Xmas Price Xmas Price Xmas Price
£69.95 exc
VAT
SAVE Ball Bearing £99.95 exc
VAT
SAVE Ball Bearing £289.95 exc
VAT
SAVE Ball Bearing
£82.19 inc
VAT 42%
Drawer Slides £117.44 inc
VAT 41%
Drawer Slides £340.69 inc
VAT 31%
Drawer Slides
5 Drawer Industrial Cabinet 6 Drawer Industrial Cabinet 8 Drawer Industrial Cabinet
• All • All • All drawers
drawers drawers run on
run on run on heavy-duty
heavy-duty heavy-duty ball bearing
ball bearing ball bearing drawer
drawer drawer slides with
slides with slides with a load
a load a load bearing
bearing bearing of up to
of up to of up to 100kg and
100kg and 100kg and fitted with
fitted with fitted with a safety
a safety a safety locking
locking locking catch to
catch to catch to prevent
prevent prevent inadvertent
inadvertent inadvertent opening.
opening. opening. • Each drawer
• Each drawer is fitted • Each drawer is fitted is fitted with fixed
with fixed dividers running with fixed dividers running dividers running back
back to front and then supplied with cross dividers for back to front and then supplied with cross dividers for to front and then supplied
personalized storage layout. personalized storage layout. with cross dividers for personalized storage layout.
• Fits perfectly underneath the workbenches in this range. • Fits perfectly underneath the workbenches in this range. • Fits perfectly underneath the workbenches in this range.
• Fitted with high quality lock and two coded keys. • Fitted with high quality lock and two coded keys. • Fitted with high quality lock and two coded keys.
• Overall Size (W x D x H): 565 x 580 x 700mm. • Overall Size (W x D x H): 565 x 580 x 700mm. • Overall Size (W x D x H): 725 x 650 x 1000mm.
• Model No. API5655B • Model No. API5656 • Model No. API7238
• List Price £419.95 • List Price £449.95 • List Price £679.95
Xmas Price Xmas Price Xmas Price
£289.95 exc
VAT
SAVE Ball Bearing £299.95 exc
VAT
SAVE Ball Bearing £459.95 exc
VAT
SAVE Ball Bearing
£340.69 inc
VAT 31%
Drawer Slides £352.44 inc
VAT 33%
Drawer Slides £540.44 inc
VAT 32%
Drawer Slides
Vice Mounting Plate
for API Series Workbenches
Each drawer cabinet is Drawers fitted with safety catch
supplied with two coded keys. to prevent inadvertent opening.
Each drawer is fitted with fixed front to back dividers and is
supplied with a quantity of relocateable cross dividers.
• Suitable
for use with the
API workbenches.
• Simply fixes to the
workbench and is ready
for the vice to be mounted
on the base plate. Personal storage layouts ideal for storing various different tools,
• Enables the vice to be stored parts and components.
out of the way when not in use
leaving a full free work surface.
• Model No. API10
• List Price £99.95
Xmas Price
£64.95 exc
VAT
SAVE
£76.32 inc
VAT 35% Vice mounting plate enables the vice to be stored out of the way
when not in use.
All units come in a Blue/Grey Industrial finish giving a robust
appearance.
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 41
3 Drawer Portable Topchest ®
Tool Chest Combination
Red/Grey with FREE Tools 6 Drawer - Ball Bearing
worth £94.60 Runners - Red/Grey
• Storage capacity
of a tool chest with 128pc Tool Kit
coupled with the
versatility of a
carry-type toolbox.
• Features two strong
®
locking hasps which
can be locked using
a padlock
(not included).
• Overall Size
• The economical way
(W x D x H):
to buy American Pro®
510 x 220 x 300mm.
quality toolboxes.
• Medium Drawer (x3):
• Supplied packed
500 x 210 x 65mm.
one inside the other.
• Model No.
• All steel construction for
AP9243COMBO10
strength and durability.
• Total Package
• Ø75mm Swivel castors.
List Price £192.55
• Overall Sizes (W x D x H):
Topchest
Xmas Price 600 x 260 x 340mm,
£74.95 exc
VAT
SAVE
Rollcab
610 x 330 x 730mm.
£88.07 inc
VAT 61% • Not interchangeable with
the rest of the
Upgrade the toolbox to include
£79.95 exc VAT American Pro® Range.
UPGRADE Ball Bearing Drawer Slides. Order
Model No. AP9243BBCOMBO £93.94 inc VAT
• Model No.
AP2200BBCOMBO
• Total Package
List Price £500.60
6 Drawer Topchest ®
Red/Grey with FREE Tools
worth £121.50
• Six-drawer unit,
perfect as an
intermediate size
locking chest.
• Overall Size
(W x D x H):
600 x 260 x 340mm.
Xmas Price
• Small Split Drawer (x3): £179.95 exc
VAT
SAVE
Ball Bearing
£211.44
150 x 220 x 40mm. inc
• Small Drawer (x2): VAT 64%
Drawer Slides
510 x 220 x 40mm.
• Medium Drawer (x1):
510 x 220 x 80mm.
• Model No.
AP2201COMBO10
Tool Chest Combination
• Total Package
List Price £269.95
14 Drawer - Ball Bearing
Runners - Red/Grey
Xmas Price with 239pc Tool Kit
£99.95 exc
VAT
SAVE
®
£117.44 inc
VAT 63%
Upgrade the toolbox to include
£106.95 exc VAT
UPGRADE Ball Bearing Drawer Slides. Order
Model No. AP2201BBCOMBO £125.67 inc VAT
• Features drop down carry
handles, smooth, ball bearing,
drawer runners, cylinder lock
and, for additional security,
steel bars that can be locked into
place to keep drawers shut.
9 Drawer Topchest - Red/Grey ®
• Manufactured with double skin
with FREE Tools worth £156.40 side walls for extra strength and
finished in smooth, hi-gloss,
• Features drop triple baked enamel.
down carry • Resists scratches,
handles, smooth oil, dirt and most solvents.
drawer slides, • Supplied with tumbler type
cylinder lock and, security locks with two
for additional numbered keys.
security, steel bars • The rollcab features Ø125mm
that can be locked hard compound rubber wheels
into place to keep with two fixed and two locking,
drawers shut. castor brackets.
• Has built-in storage • Topchest Size (W x D x H):
for locking bars when 600 x 260 x 380mm.
toolbox is in use. • Rollcab Size (W x D x H):
• Overall Size (W x D x H): 615 x 330 x 770mm.
600 x 260 x 380mm. • Model No.
• Model No. AP2250BBCOMBO
AP22509COMB10 • Total Package
• Total Package List Price £706.70
List Price £348.15
Xmas Price
£119.95 exc
VAT
SAVE
£140.94 inc
VAT 66% Xmas Price
Upgrade the toolbox to include
£129.95 exc VAT £279.95 exc
VAT
Ball Bearing
UPGRADE Ball Bearing Drawer Slides. Order
Model No. AP22509BBCOMB £152.69 inc VAT £328.94 inc
VAT
SAVE
60%
Drawer Slides
42 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
® ®
5 Drawer Topchest with 10 Drawer Topchest with
Ball Bearing Runners Ball Bearing Runners
Red with FREE Tools worth £418.80 Red with FREE Tools worth £418.80
Ball Bearing Ball Bearing
Drawer Slides Drawer Slides
• All heavy gauged steel • All heavy gauged steel construction and
construction and manufactured with steel inner walls for extra strength and durability. manufactured with steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide • Heavy-duty 45mm ball bearing drawer runners
superior performance and carry heavier loads. provide superior performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length drawers in multiple locations. • Full height rear locking mechanism, locks full-length drawers in multiple locations.
• Added security provided by tumbler lock, supplied with two folding keys. • Added security provided by tumbler lock, supplied with two folding keys.
• Rust and solvent resistant powder coat paint finish. • Rust and solvent resistant powder coat paint finish.
• Each drawer features aluminium • Each drawer features aluminium
Also available in BLACK Also available in BLACK
drawer pulls and non-slip liners. drawer pulls and non-slip liners.
Model No. AP33059BCOMBO Model No. AP33109BCOMBO
• Overall Size (W x D x H): 660 x 315 x 425mm. • Overall Size (W x D x H): 660 x 315 x 485mm
• Model No. AP33059COMBO • Model No. AP33109COMBO
• Total Package List Price £708.75 • Total Package List Price £808.75
Xmas Price Xmas Price
£229.95 exc
VAT
SAVE
£299.95 exc
VAT
SAVE
£270.19 inc
VAT 68% £352.44 inc
VAT 63%
5 Drawer Topchest & 5 Drawer Rollcab with Ball Bearing 8 Drawer Topchest & 7 Drawer Rollcab with Ball Bearing
Runners - Red Runners - Red
with FREE Tools with FREE Tools
worth £478.20 worth £478.20
® ®
• All heavy gauged steel • All heavy gauged steel
construction and manufactured construction and manufactured
with steel inner walls for extra with steel inner walls for extra
strength and durability. strength and durability.
• Heavy-duty 45mm ball bearing • Heavy-duty 45mm ball bearing
drawer runners provide superior drawer runners provide superior
performance and carry heavier performance and carry
loads. heavier loads.
• Full height rear locking • Full height rear locking
mechanism, locks full-length mechanism, locks full-length
drawers in multiple locations. drawers in multiple locations.
• Added security provided by • Added security provided by
tumbler lock, supplied with tumbler lock, supplied with
two folding keys. two folding keys.
• Rust and solvent resistant • Rust and solvent resistant
powder coat paint finish. powder coat paint finish.
• Each drawer features • Each drawer features
aluminium drawer pulls aluminium drawer pulls
and non-slip liners. and non-slip liners.
• Rollcab includes four • Rollcab Includes four
Ø125mm rubber wheels, Ø125mm rubber wheels,
two swivel castors with two swivel castors with
large toe locks and two large toe locks and two
fixed wheels. fixed wheels.
• Features a high polished • Features a high polished
chrome handle to enable chrome handle to enable
smooth manoeuvrability. smooth manoeuvrability.
• Also includes a 10mm thick top mat. • Also includes a 10mm thick top mat.
• Topchest Size (W x D x H): • Topchest Size (W x D x H):
660 x 315 x 425mm. 660 x 315 x 430mm.
• Rollcab Size (W x D x H): • Rollcab Size (W x D x H):
685 x 465 x 835mm. 685 x 465 x 995mm
• Model No. APCOMBOBBTK55 Ball Bearing • Model No. APCOMBOBBTK57 Ball Bearing
• Total Package List Price £1218.10 • Total Package List Price £1358.10
Drawer Slides Drawer Slides
Xmas Price Xmas Price
£449.95 exc
VAT
SAVE
£499.95 exc
VAT
SAVE
£528.69 £587.44
inc Also available in BLACK inc Also available in BLACK
VAT 63% Model No. APCOMBOBBTK56 VAT 63% Model No. APCOMBOBBTK58
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 43
5 Drawer Topchest, 2 Drawer Add-On Chest & 7 Drawer Rollcab
Combination - Red with 1179pc Modular Tool Kit
®
Premier Line Tools for
the Professional
X2
Additional tool
trays and optional
accessories available.
Browse online at
www.sealey.co.uk
• 5 Drawer Topchest
• Overall Size (W x D x H):
660 x 435 x 490mm
• Model No. AP26059TB
• List Price £359.95
• 2 Drawer Add-On Chest
• Overall Size (W x D x H):
670 x 440 x 210mm
• Model No. AP26029TB
• List Price £169.95
• 7 Drawer Rollcab
• Overall Size (W x D x H):
685 x 465 x 995mm
• Model No. AP26479TB
• List Price £579.95
• Package Model No. SPTCOMBO2
• Total Package List Price £3214.00
Xmas Price Ball Bearing
Also available in Red
£1099.95 exc
VAT
SAVE Model No. SPTCOMBO1
£1292.44 inc
VAT 66%
Drawer Slides
44 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
6 Drawer Topchest & 8 Drawer
Rollcab Combination with
1231pc Modular Tool Kit
Premier Line Tools for Ball Bearing
the Professional
Drawer Slides
• Topchest Model No. AP2403 • Rollcab Model No. AP2408
• Overall Size (W x D x H): • Overall Size (W x D x H):
690 x 465 x 535mm. 766 x 465 x 958mm.
• 6 x Medium Drawers • 6 x Medium Drawers
• 2 x Large Drawers
X2
Additional tool
• Package Model No. APTTC02 trays and optional
• Total Package List Price accessories available.
£3700.90 Browse online at
www.sealey.co.uk
Xmas Price
£1399.95 exc
VAT
SAVE
£1644.94 inc
VAT 62%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 45
® ®
Superline PRO® Tool Chests Superline PRO® Tool Chests
• All heavy gauged steel construction and
manufactured with
A • All heavy gauged steel construction and
manufactured with
A
steel inner walls for steel inner walls for
extra strength and extra strength and
durability. durability.
• Heavy-duty 45mm ball • Heavy-duty 45mm ball
bearing drawer runners bearing drawer runners
provide superior provide superior
performance and carry performance and carry
heavier loads. heavier loads.
• Full height rear locking • Full height rear locking
mechanism, locks
full-length drawers in
multiple locations.
B mechanism, locks
full-length drawers in
multiple locations.
• Added security provided • Rust and solvent resistant
by tumbler locks, supplied powder coat
with two folding keys. paint finish.
•
•
Rust and solvent resistant
powder coat paint finish.
Rollcab fitted with four
• Rollcab fitted
with four
Ø125mm rubber
B
Ø125mm rubber wheels, wheels, two swivel
two swivel castors castors with large
with large toe locks and toe locks and two
two fixed wheels. fixed wheels.
• Topchest features • Topchest features
heavy-duty side handles. heavy-duty side handles.
• Rollcab features a high • Rollcab features a high
polished chrome handle polished chrome handle
for comfort and control for comfort and control
when manoeuvring. when manoeuvring.
• Rollcab and hang-on • Rollcab and hang-on
chest are supplied chest are supplied
with a 10mm thick with a 10mm thick
top mat to top mat to
protect top protect top
surface
from C D
surface
from C
scratching.
SAVE
scratching.
SAVE
D
UP TO UP TO
47% 45%
A B C D A B C D
• AP41110 (Red) • AP41119 (Red) • AP41120 (Red) • AP33589 (Red) • AP41149 (Red) • AP41119 (Red) • AP41169 (Red) • AP33519 (Red)
• AP41110B (Black) • AP41119B (Black) • AP41120B (Black) • AP33589 (Black) • AP41149B (Black) • AP41119B (Black) • AP41169B (Black) • AP33519B (Black)
• List Price £699.95 • List Price £199.95 • List Price £1069.95 • List Price £379.95 • List Price £799.95 • List Price £199.95 • List Price £1199.95 • List Price £329.95
Xmas Price Xmas Price Xmas Price Xmas Price Xmas Price Xmas Price Xmas Price Xmas Price
£399.95 exc
VAT £109.95 exc
VAT £599.95 exc
VAT £199.95 exc
VAT £449.95 exc
VAT £109.95 exc
VAT £659.95 exc
VAT £179.95 exc
VAT
£469.94 inc
VAT £129.19 inc
VAT £704.94 inc
VAT £234.94 inc
VAT £528.69 inc
VAT £129.19 inc
VAT £775.44 inc
VAT £211.44 inc
VAT
10 Drawer Topchest & Rollcab 19 Drawer Topchest & Rollcab
Combination with Ball Bearing Slides Combination with Ball Bearing Slides
• Heavy gauge steel with double wall
• Heavy gauge steel with double wall construction construction for extra strength and durability.
for extra strength and durability. • Ball bearing drawer runners provide superior
• Ball bearing drawer runners provide performance and carry heavier loads.
superior performance • Each drawer fitted with drawer liners and full
and carry heavier loads. length aluminium handle with
• Each drawer fitted with drawer liners centre hand grip for ease of
and full length aluminium handle with opening and closing.
centre hand grip for ease of • Added security provided by
opening and closing. cylinder locks, supplied
• Added security provided by cylinder with two keys.
locks, supplied with two keys. • Topchest lid fitted with gas
• Topchest lid fitted with gas dampers for ease of
dampers for ease of opening opening and preventing
and preventing accidental closure.
accidental closure. • Rust and solvent
• Rust and solvent resistant resistant powder
powder coat paint finish. coat paint finish.
• Rollcab features rubber grip • Rollcab features rubber
side handles for comfort and grip side handles for
ease when manoeuvring. comfort and ease
• Rollcab includes two Ø125mm when manoeuvring.
swivel castors with large toe • Rollcab includes two
locks and two fixed wheels. Ø125mm swivel
• Model No. AP2910 castors with large
• List Price £999.95 toe locks and two
fixed wheels.
• Model No. AP2919
• List Price £1999.95
NEW
NEW
Xmas Price Xmas Price
£499.95 exc
VAT
SAVE
£999.95 exc
VAT
SAVE
£587.44 inc
VAT 50% £1174.94 inc
VAT 50%
46 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Please refer to our Winter Promotion to view our impressive range of Lighting.
4 LED Rubber Grip Aluminium 20 LED Rubber Grip Aluminium 3W CREE LED Aluminium Torch
Torch 2 x AA Cell Torch 2 x D Cell
NEW NEW NEW
• Ultra bright LEDs with up to 80,000 hours life. • Ultra bright LEDs with up to 80,000 hours life. • Extremely bright, white light with an output of 110 lumens.
• Manufactured from lightweight aluminium. • Manufactured from lightweight aluminium. • Ergonomically designed lightweight aluminium housing.
• Requires 2 x AA Cells. • Requires 2 x D Cells. • Powered by 3 x AAA cell (supplied).
• Model No. LED017 • Model No. LED018 • Model No. LED020
• List Price £12.95 • List Price £26.95 • List Price £32.95
Xmas Price Xmas Price Xmas Price
£9.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£23.95 exc
VAT
SAVE
£11.69 inc
VAT 23% £23.44 inc
VAT 26% £28.14 inc
VAT 27%
36W/230V Energy Saving Work Light 36W/230V Telescopic 2 x 36W/230V
• Fitted with a compact fluorescent Energy Saving Work Light Telescopic Energy
energy saving bulb, which
emits a bright white light. • Fitted with a compact fluorescent energy Saving Work Light
• Low wattage means a low saving bulb, which emits a bright white light. • Fitted with compact fluorescent energy
energy consumption • Low wattage means a low energy saving bulbs, which emit a bright white light.
which helps to reduce consumption which helps to reduce • Low wattage means a low energy consumption
energy bills. energy bills. which helps to reduce energy bills.
• Mounted on a floor • Lighting bracket features angle adjustment. • Lighting brackets feature angle adjustment.
standing bracket, which • Mounted on a two-position telescopic tripod • Removable head allows free-standing use
features angle adjustment. with folding legs and cable storage hooks. or can be mounted on a telescopic tripod stand.
• Incorporates pre-drilled • Suitable for lighting workshops, • Stand features two-position telescopic
holes for optional wall garages and other environments uprights with folding legs and cable
mounting. where light is limited. storage hooks.
• Model No. ML36 • Model No. ML36T NEW • Model No. ML36TD NEW
• List Price £32.95 NEW • List Price £49.95 • List Price £84.95
Xmas Price Xmas Price Xmas Price
£24.95 exc
VAT
SAVE
£37.95 exc
VAT
SAVE
£64.95 exc
VAT
SAVE
£29.32 inc
VAT 24% £44.59 inc
VAT 24% £76.32 inc
VAT 24%
28 LED Cordless Rechargeable 36 LED Cordless Rechargeable 36 LED Cordless Lithium-ion
Inspection Lamp Inspection Lamp Rechargeable Inspection Lamp
• Robust inspection lamp with lightweight
• Robust • Robust
Lithium-ion battery suitable for the
housing heavy-duty
professional user.
with housing, with
• 36 super bright LEDs.
bumper rubber grip,
• 360° swivel
ring. incorporating
hanging
• 28 Super 36 super bright
hook and
bright LEDs LEDs.
integral
with switched • Ball joint gripper
magnet
high or low for easy positioning.
for
output. • Supplied with mains charger
hands-free • Model No. LED013
• Operates for up to 7 hours on a full charge. and LED charging indicator.
applications. • List Price £59.95
• Model No. LED28 • Model No. LED36
• Supplied with mains charger.
• List Price £69.95 • List Price £74.95
Xmas Price Xmas Price Xmas Price
£46.95 exc
VAT
SAVE
£49.95 exc
VAT
SAVE
£39.95 exc
VAT
SAVE
£55.17 inc
VAT 33% £58.69 inc
VAT 33% £46.94 inc
VAT 33%
21+5 LED Cordless 21+5 LED Hi-Vis Cordless 30 LED Lithium-ion Cordless
Lithium-ion Rechargeable Lithium-ion Rechargeable Rechargeable Inspection Lamp
Inspection Lamp Inspection Lamp NEW • Heavy-duty, lightweight lamp incorporating
30 high intensity LEDs.
• Featuring 26 super bright LEDs, 21 used • Featuring 26 super bright LEDs, • Shock, oil and water resistant (IP65) rubber
as an inspection lamp or 5 in the end for 21 used as an inspection lamp or housing with contoured grip.
use as a directional torch. 5 in the end for use as a directional torch. • Replaceable shatterproof polycarbonate
• Two 360° swivel hanging hooks for • Two 360° swivel hanging hooks for wide lens and a highly polished reflector
hands-free applications allowing unit to hands-free applications allowing unit board gives an increased spread of light.
be used horizontally or vertically. to be used horizontally or vertically. • Three green LEDs and one red
• Three rubber covered magnets for protection • Three rubber covered magnets for protection which indicate battery state, form
against accidental damage, two magnets against accidental damage, two magnets a charging sequence and warns the user
on the rear of the lamp for horizontal use on the rear of the lamp for horizontal use when to charge.
and one on the end for vertical use. and one on the end for vertical use. • Model No. LED3008
• Model No. LED2105 • Model No. LED2105F • List Price £149.95
• List Price £74.95 • List Price £79.95
Xmas Price Xmas Price Xmas Price
£39.95 exc
VAT
SAVE
£42.95 exc
VAT
SAVE
£79.95 exc
VAT
SAVE
£46.94 inc
VAT 47% £50.47 inc
VAT 46% £93.94 inc
VAT 47%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 47
Benchtop Belt/Disc Sander 406mm Throat Variable Speed Air Nail/Staple Gun Kit comprising
• Bench mounting semi-portable belt
and disc sander suitable for general
Scroll Saw Compressor, Hose & Nailer/Stapler
woodworking applications. • Fully CE • Air Displacement:
• Belt can be used approved scroll 4.8cfm.
horizontally, vertically saw with quality • Maximum Free
or any angle rounded table. Air Delivery: 3.4cfm.
in-between. • Features • The most economical
• Sanding disc parallel arm way to purchase an air
table tilts to 45° design and quick nail/stapler gun kit.
and is supplied blade changing • Comprises of SA0615
with mitre gauge. system. Compressor, 5mtr
• Model No. • Variable speed Air Hose and a
SM14 operation to cut multiple Nail/Staple Gun.
• List Price types of materials. • Compressor can also
£189.95 • Model No. SM1302 be used with any of
• List Price £127.95 our air brushes or
tyre inflators.
Xmas Price Xmas Price Xmas Price • Model No.
£129.95 exc
VAT
SAVE
£84.95 exc
VAT
SAVE
£179.95 exc
VAT
SAVE
SA0615KIT
• List Price
£152.69 inc
VAT 32% £99.82 inc
VAT 34% £211.44 inc
VAT 40% £299.95
5tonne 520mm Capacity Log Splitter 8tonne Vertical Type Hydraulic 254mm Table Saw with Stand
• Safe and easy
way to split Log Splitter 575mm Capacity & Extension Tables
logs, offering • Safe and easy way to split logs, offering
continuous continuous sizing and up to 8tonne of pressure. • Adjustable blade
sizing and up • Seven tier wedge system allows workpiece height and tilt,
to 5tonnes to be as near to wedge as possible, therefore up to 45°.
of pressure. minimizing splitting time. • Fitted with
• Splits logs • Operated by foot pump requiring a maximum NVR safety
almost instantly of 15 strokes to capacity (without load) switch for user safety.
upon contact, for easy and fast splitting. • Includes quick lock
keeping labour and work time to a minimum. • Tier Log Lengths: 300, 350, 400, 450, rip-fence, mitre gauge,
• Fitted with a two hand safety operation, push-button 500, 550, 600mm. dust extraction port,
and lever. • Maximum Load Pressure: 8tonne. push stick and
• Maximum Log Length x Ø: 520 x 250mm. • Overall Size (W x D x H): metal stand.
• Overall (W x L x H): 270 x 940 x 510mm. 285 x 540 x 1040mm. • Powered by
• Model No. LS520H • Model No. LS575VH 230V - 1500W motor.
• List Price £369.95 • List Price £169.95
Xmas Price Xmas Price Xmas Price
£229.95 exc
VAT £114.95 exc
VAT £144.95 exc
VAT
SAVE
• Model No.
TS10SEW
£270.19 £135.07 £170.32
inc SAVE inc SAVE inc
38% 32% 34% • List Price
VAT VAT VAT
NEW £219.95
255mm Compound Sliding 1/2" Hollow Chisel Dust & Chip
Mitre Saw 230V Mortiser 230V Extractor
• Lightweight portable • Bench mounting mortising 2hp 230V
saw with aluminium machine suitable for cutting
base, chassis and mortises for joints and also • Mobile workshop extractor
machined aluminium for locks and dead bolts. suitable for attachment
table. • No-volt release switch to to most static workshop
• Features sliding action, prevent accidental restart machines including
table extension wings after power failure or jam. bandsaws, table saws,
and work clamp. • Includes table, workpiece scroll saws, planers and
• Laser guide enables user clamp and mortising chisels sanders.
to accurately align cut line plus arbor and chuck • Supplied with 2.5mtr
avoiding miscutting for standard drill bits. of Ø100mm suction
and wastage. • Model No. SM94 ducting.
• Maximum Cut: • List Price £259.95 • Model No. SM47
75 x 300mm. • List Price £379.95
• Saw arm features ±45°
mitre with positive stop
Xmas Price and 45° bevel for cutting Xmas Price Xmas Price
£144.95 exc
VAT
compound mitres.
£159.95 exc
VAT
SAVE
£269.95 exc
VAT
£187.94
SAVE
£317.19
SAVE
£170.32 inc
VAT 42% • Model No. SMS10
• List Price £249.95
inc
VAT 38%
inc
VAT 29%
4-Speed Wood Lathe 1000mm Centres 245mm Professional
Bandsaw
• Throat depth: 245mm.
• Max. height cut: 100mm.
• Steel chassis with locking blade wheel covers.
• Fitted with blade wheel brush to
prevent dust accumulation.
• Bearing mounted blade wheels and belt drive
induction motor provide smooth operation.
• Ø60mm Dust extraction port.
• Fully approved to current CE regulations.
• Supplied with quick adjusting rip fence,
mitre gauge and push stick.
• Ideal for the first time user or as a back up unit. • Model No. SM1304
• Maximum Turning Capacity: 1000 x 350mm. • List Price £289.95
• NVR Switch prevents re-start after
the mains power has been interrupted.
Xmas Price • Powered by smooth operating 370Watt motor.
• Lathe bed with twin bar construction.
Xmas Price
£109.95 exc
VAT
SAVE
• Solid head and tail stocks.
• Model No. SM1308
£159.95 exc
VAT
SAVE
£129.19 inc
VAT 39% • List Price £179.95 £187.94 inc
VAT 45%
48 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
3-Way Fill Heavy-Duty Side Lever Heavy-Duty Twin Piston Pistol Type Air Operated
Grease Gun Grease Gun 3-Way Fill Continuous Flow Grease Gun
NEW
• 3-Way • Highly
fill. durable
• Air bleed cast iron
facility. pump head,
• Accepts features dual
• Die-cast head and
standard 400g piston design for
body with chromed steel
cartridges. high volume
grease tube.
• Supplied with rigid performance.
• Includes rigid extension
extension tube and • 3-Way fill with cartridge,
tube and 4-jaw coupler.
push-on hydraulic 4-jaw bulk or manual capability.
• Trigger operated continuous flow
coupling. • Supplied with rigid extension
gun with 3-way fill and air-bleed valve.
• Ideal for the busy automotive, tube and push-on hydraulic
• Accepts 400g grease cartridges,
agricultural or 4-jaw coupling.
bulk or manual fill.
industrial workshop. • Rubber gripped grease tube and
• Delivers at a pressure from
• Model No. AK44 handle for easy grip.
1200 - 4500psi.
• List Price £25.95 • Half stroke gives low pressure and
• Model No. SA401
low volume, full stroke provides high
FREE pressure and high volume delivery.
• List Price £69.95
Universal Bearing
Packer
• Model No.
• Model No. AK4402
Xmas Price •
VS7022
List Price £7.95 Xmas Price • List Price £36.95 Xmas Price
£16.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£32.95 exc
VAT
SAVE
£19.92 inc
VAT 35% £23.44 inc
VAT 46% £38.72 inc
VAT 53%
12V - Cordless Grease Gun 18V - Cordless Grease Gun 12.5kg Heavy-Duty Bucket
Greaser with
Follower Plate
• Zinc die-cast pump
head with pressed
• High steel pump and
power, carry handle.
professional, • Fits all popular
cordless 12.5kg and
• Cordless grease gun, some 20kg
grease gun, developing kegs (not
developing 8000psi. included).
6000psi, to • Ideal for in-field • Supplied with
simplify and lubrication where follower plate
speed-up manual power and speed to prevent
greasing. are required. cavitation and
• Suitable for 400g • Suitable for 400g cartridges, ensure smooth
cartridges, manual manual or bulk filling. flow of grease.
or bulk filling. • Features LCD battery condition indicator, air bleed and • Fitted with 1.5mtr
• Features LCD battery condition indicator. heavy-duty aluminium pressure head. high pressure hose,
• Supplied with 12V 1.7Ah battery, mains charger and • Supplied with 18V 1.7Ah rigid extension
in-car adaptor. battery and mains charger. and 4-jaw coupler.
• Model No. CPG12V
• List Price £169.95
FREE • Model No. CPG18V FREE • Model No. AK45X
Second • List Price £199.95 Second • List Price £84.95
Battery Battery
• Model No. • Model No.
Xmas Price •
CPG12VBP
List Price £39.95 Xmas Price •
CPG18VBP
List Price £47.45 Xmas Price
£119.95 exc
VAT
SAVE
£149.95 exc
VAT
SAVE
£64.95 exc
VAT
SAVE
£140.94 inc
VAT 29% £176.19 inc
VAT 25% £76.32 inc
VAT 24%
12.5kg Air Operated Grease Pump 50kg Air Operated
Grease Pump
• Fitted with high efficiency
50:1 air motor.
• Workshop tested reliability.
• Fitted with high efficiency 50:1 air motor. • Supplied with safety regulator
• Workshop tested reliability. to prevent over pressurisation
• Fitted with a follower plate to prevent pump in pump unit.
unit cavitation and ensure a smooth flow • Fitted with a follower plate to
of grease. prevent pump unit cavitation and
• Includes grease hose, z-swivel, hand gun ensure a smooth flow of grease.
and bucket trolley (bucket not included). • Includes grease hose, z-swivel,
• Model No. AK452X hand gun and bucket trolley
• List Price £559.95 (bucket not included).
• Model No. AK453X
• List Price £669.95
Xmas Price Xmas Price
£399.95 exc
VAT
SAVE
£439.95 exc
VAT
SAVE
£469.94 inc
VAT 33% £516.94 inc
VAT 34%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 49
Lever Action Pump Lift Action Pump Heavy-Duty Rotary Pump for AdBlue
• Polypropylene 0.35ltr/Revolution
lever pump with NEW • Heavy-Duty steel
barrelled, • Polypropylene rotary pump,
steel rod and
dip-tube, suitable
self priming,
lift pump.
specially fitted with
Bakelite vanes for
NEW
for use with oils, • Supplied with transferring AdBlue as well
antifreeze, adjustable as acids, alkalis, oils and
degreasants
and other non-corrosive fluids.
2"BSP adaptor
and dip-tube.
NEW other fluids of similar viscosity.
• Supplied with 1300mm
• Features polyoxymethylene • Suitable for oils, polyethylene extension hose.
handle for prevention against antifreeze, degreasants • Features 2"BSP connector
aggressive fluids melting and other non-corrosive fluids. suitable for use on
the handle. • Delivers approximately 500ml 205ltr drums.
• Fitted with 360° outlet nozzle. per full stroke. • Delivers approximately
• Suitable for 205ltr drums. • Model No. TP6805 0.35ltr/revolution.
• Delivers approximately • List Price £34.95 • Model No. TP57
400ml per stroke. • List Price £99.95
Xmas Price Xmas Price Xmas Price
£19.95 exc
VAT
SAVE
• Model No.
TP6803 £25.95 exc
VAT
SAVE
£74.95 exc
VAT
SAVE
£23.44 inc
VAT 26% • List Price
£26.95
£30.49 inc
VAT 26% £88.07 inc
VAT 25%
Rotary Oil Drum Pump Low Voltage Submersible NEW 20ltr Mobile Gear NEW
0.3ltr/Revolution Transfer Pumps Oil Dispensing Unit
• Robust and compact • Steel construction self-priming
• Cast steel body, suitable portable pump for lever pump.
for oils, antifreeze, use with diesel, • Features heavy-duty wheels
degreasants and other non-aggressive and gripped handle for
non-corrosive fluids. chemicals and ease of manoeuvrability.
• Supplied with 2"BSP fresh or dirty water. • Supplied with a 20ltr
adaptor and is suitable • Suitable for reservoir, 1.9mtr
for use on re-fuelling/fluid transfer delivery hose and
205ltr drums. of plant, agricultural and flow control tap with
• Delivers marine equipment on site. angled spout.
approximately • The pump is supplied with • Suitable for gear oil
0.3ltr/revolution. a 3mtr outlet hose and SAVE and fluids with similar
• Model No. TP54 stainless steel nozzle plus UP TO viscosity.
• List Price £33.95 a 4mtr battery cable with clips. 21% • Model No. TP17
Model Voltage List Xmas Xmas • List Price £159.95
No. Price Price Price
Xmas Price Exc VAT Inc VAT Xmas Price
£24.95 exc
VAT
SAVE
TP94 12V £62.45 £49.95 £58.69 £114.95 exc
VAT
SAVE
£29.32 inc
VAT 27% TP9424 24V £69.95 £52.95 £62.22 £135.07 inc
VAT 28%
35ltr Air Discharge 65ltr Air Discharge Waste 90ltr Air Discharge Mobile Oil Drainer
Mobile Oil Drainer Oil Drainer
with Probes
NEW
• Steel fabricated 35ltr reservoir.
• Height adjustable steel drain pan, fitted with grid filter.
• Features gravity feed reservoir • 90ltr Reservoir
with air discharge hose. • Steel fabricated 65ltr reservoir and telescopic steel drain and height adjustable steel drain pan fitted with grid filter.
• Includes quick-release oil dipstick probes, pan fitted with grid filter. • Gravity feed reservoir with air discharge hose.
powered by venturi suction pump. • Air discharge drain with hose. • Reservoir oil level indicator tube.
• Fitted with heavy-duty wheels and • Fitted with reservoir oil level indicator tube. • Heavy-duty wheels and castors for easy mobility.
castors for easy mobility. • Min./Max. Pan Height: 1070/1590mm. • Min./Max. Pan Height: 1250/1800mm.
• Model No. AK456DX • Model No. AK451DX • Model No. AK458DX
• List Price £349.95 • List Price £369.95 • List Price £419.95
Xmas Price Xmas Price Xmas Price
£199.95 exc
VAT
SAVE
£169.95 exc
VAT
SAVE
£289.95 exc
VAT
SAVE
£234.94 inc
VAT 43% £199.69 inc
VAT 54% £340.69 inc
VAT 31%
50 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
1ltr Multi-Purpose 5.5ltr Manual Vacuum 6ltr Vacuum Oil & Fluid
Mini Pump Oil & Fluid Extractor Extractor & Discharge
• Multi-purpose pump
NEW • 5.5ltr Capacity. • 6ltr Capacity device constructed
• Ingenious vacuum device. from composite materials and
perfect for topping up • Ideal for other liquids such as water. suitable for extracting oils.
difficult to access points on • To remove oil from a car engine, simply • Features a controlled discharge
motor vehicles, lawnmowers, push the probe down the dip-stick tube function for emptying the unit.
chainsaws and other jobs and pump the handle on the top of the unit. • Suitable also for low viscosity
around the workshop • Allows other work to be fluids such as water.
and home. undertaken whilst suction • Supplied with Ø5.8, Ø6.7mm
• One litre capacity. removes fluid. suction probes and
• Suitable for all engine oils, • Avoids searching for drain a 1mtr extension tube.
transmission fluids, brake plug keys and getting • Uses probes to drain
fluids and general purpose under the vehicle. engine oil through the
cleaners. • Ideal for mobile mechanics. dipstick hole.
• Model No. TP6804 • Model No. TP696 • Model No. TP6905
• List Price £19.95 • List Price £59.95 • List Price £117.45
Xmas Price Xmas Price Xmas Price
£14.95 exc
VAT £39.95 exc
VAT
SAVE
£79.95 exc
VAT
SAVE
£46.94 £93.94
SAVE
£17.57 inc
VAT 25%
inc
VAT 33%
inc
VAT 32%
7.6ltr Oil/Fluid 17ltr Oil/Fluid IBC Bund 765 x 2000 x 1490mm
Drain Pan Drain Pan • Heavy-duty polyethylene
IBC bund
Direct
Delive
ry
• Made from ideal for
high catching and
density preventing
Polyethylene spillages.
with UV • Constructed
stabilisers. • Heavy wall
with raised
• Features construction
dispensing
anti-splash stays rigid,
area with
even with hot oil.
lip that
contains fluid • Suitable for
10ltr sump.
• Features
NEW
when carrying multiple oil changes.
polyethylene centre
or pouring. • Features anti-splash lip that
support providing added
• Large handles and enclosed pouring spout aid return of contains fluid when carrying or pouring.
strength and stability to load.
oil/fluid to recycling container. • Large handles and enclosed pouring spout make easy
• Manufactured with 1100ltr spill tray to comply with storage
work of returning oil/fluid regulations.
• Model No. DRP02 to recycling container.
• Suitable for
Xmas Price • List Price £17.45 Xmas Price • Model No. DRP03
• List Price £21.95
Xmas Price storage of 1 x IBC
£11.95 exc
VAT
SAVE
£15.95 exc
VAT
SAVE
£749.95 exc
VAT
container.
• Model No.
£14.04 £18.74
SAVE
inc
VAT 32%
inc
VAT 27% £881.19 inc
VAT 25% DRP24
• List Price £999.95
Dispensing/Storage Drum Rack Unit Drum Drain Pan 2 Drum Work Floor NEW
• High density polyethylene
construction, suitable
• Manufactured 1600 x 800 x 150mm & Ramp
from hard
for storing 2 x 205ltr wearing DRP20
drums. polycarbonate
• Moulded with NEW material
gradual decline preventing
and recesses corrosion. 1
to secure drum. P2
• Fits to top DR
• Horizontal storage of drum for
of drums provides draining
access to dispense unused oil
contents into smaller back into drum.
containers. • Manufactured with slip resistant surface and
• Features built-in filter
• DRP23 can be used 3 SAVE lightweight construction allowing easy SAVE
2 grid and lipped edge
with DRP22 providing added storage. RP 35% transportation and positioning. 33%
D for easy handling.
Model Type List Xmas Xmas • Model No. DRP19 Model Type List Xmas Xmas
No. Price Price Price • List Price £59.95 No. Price Price Price
Exc VAT Inc VAT Xmas Price Exc VAT Inc VAT
DRP22 Drum Rack Unit £399.95 £259.95 £305.44 £43.95 exc
VAT
SAVE
NEW DRP20 Work Floor £299.95 £199.95 £234.94
DRP23 Extension Unit £229.95 £149.95 £176.19 £51.64 inc
VAT 27% DRP21 Ramp £199.95 £134.95 £158.57
Spill Trays NEW Polyethylene Barrel Bunds
• Manufactured from
high density polyethylene, • Complies with The Control of Pollution
making the spill tray Oil Storage Regulations 2001.
ideal for catching and • These state that any container, tank or drum
preventing oil and over 200ltr capacity (with exceptions)
chemical spillages. must be bunded.
7
NEW
P1
R
• 30ltr and 60ltr tray • This bund must take at least 110%
D
capacity. capacity of the oil storage container.
• Lightweight for easy • Manufactured from polyethylene making
transportation and positioning. SAVE the bunds ideal for storing aggressive
UP TO chemicals.
8
26%
P1
• Compatible with most forklifts and
R
D
pallet trucks.
Model Dimensions Spill Drum Platform List Xmas Xmas • Lightweight for easy transportation and SAVE
No. Tray Capacity Price Price Price UP TO
positioning, yet still strong and durable. 38%
Capacity Exc VAT Inc VAT
DRP30 800 x 400 x 165mm 30ltr 2 x 25ltr £34.95 £25.95 £30.49 Model No. Dimensions List Xmas Price Xmas Price
Price Exc VAT Inc VAT
DRP31 800 x 400 x 165mm 30ltr 2 x 25ltr £69.95 £52.95 £62.22
DRP32 600 x 1000 x 175mm 60ltr 4 x 25ltr £64.95 £49.95 £58.69 DRP17 1300 x 750 x 440mm £279.95 £174.95 £205.57
DRP33 600 x 1000 x 175mm 60ltr 6 x 25ltr £112.45 £82.95 £97.47 DRP18 1380 x 1290 x 280mm £329.95 £219.95 £258.44
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 51
2-Tread Step Stool 150kg Capacity Aluminium Step
• EN 14183 Ladders
Approved
steps with
150kg capacity.
• Tubular metal
construction with • EN 131 Approved
composite feet with 150kg capacity.
for added stability. • Deep non-slip steps
• Features three and wide platform
large anti-slip with safety rail allow
treads. plenty of leg room
• Foam-cushioned for safe standing.
hand rail for • Ribbed feet give full
added comfort. floor contact for
• Suitable also extra stability.
as a stool.
• Folds flat
for easy
storage and
transportation.
• Model No. SAVE
ASL2 UP TO
• List Price 36%
£31.95
Model No. Treads Platform List Xmas Price Xmas Price
Height Price Exc VAT Inc VAT
Xmas Price ASL3S 3-Tread 650mm £52.95 £33.95 £39.89
£19.95 exc
VAT
SAVE
ASL5 5-Tread 1090mm £83.95 £57.95 £68.09
£23.44 inc
VAT 38% ASL7 7-Tread 1530mm £119.95 £84.95 £99.82
Aluminium Extension Ladder Roof Hook
• Safe and easy
Combination Ladders way to access
a roof with your
• Multi-use aluminium extension ladder.
ladder, manufactured to • Lightweight aluminium
EN 131 standards. design.
• Ideal for the tradesman, • Model No. LAD003
can be used as a single, • List Price £49.95
double or triple
extension ladder. Xmas Price
• Doubles as a step ladder.
£33.95 exc
VAT
SAVE
£39.89 inc
VAT 32%
Ladder Rack Clamps
• Safe and easy
way to secure
SAVE ladders with
UP TO a universal
38% fitment for
roof racks.
Model No. Treads Min./Max. List Xmas Price Xmas Price
Height Price Exc VAT Inc VAT • Model No. SLC2
ACL306 3x6 1.8mtr / 3.70mtr £199.95 £129.95 £152.69 Xmas Price • List Price £32.95
ACL3 3x9 2.54mtr / 5.94mtr £299.95 £189.95 £223.19 £21.95 exc
VAT
SAVE
ACL312 3x12 3.45mtr / 7.35mtr £399.95 £249.95 £293.69 £25.79 inc
VAT 33%
Aluminium 4-Way Aluminium Folding
Folding Platforms Platform Ladder
APS2
APS3
• EN 14183 Approved folding and
portable 2-tread aluminium platform
with 150kg capacity.
• Large, ribbed non-slip platform and • EN 131 Approved 4-way, 4-section aluminium
treads for safe and easy ladder with mechanically swaged joints.
manoeuvrability. • 6 Robust auto latching locking
• Durable aluminium alloy frame hinges allow for multi positioning.
with ribbed feet for extra stability. SAVE
UP TO • Can be used as a platform, straight
• Safety locking catches on legs.
30% ladder, step ladder or offset ladder.
• Extra stability with two wide
Model No. Platform Size Platform List Xmas Price Xmas Price spars and 12 reinforced rungs.
Height Price Exc VAT Inc VAT Xmas Price • Optional metal platform available to use in
APS2 300 x 870mm 460mm £99.95 £69.95 £82.19 £99.95 exc
VAT
SAVE
platform/scaffold position,
order Model No. AFPL1/P.
APS3 300 x 1080mm 660mm £117.45 £84.95 £99.82 £117.44 inc
VAT 29% • Model No. AFPL1
• List Price £139.95
52 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
Aluminium NEW Sack Truck with 210 x 50mm Sack Truck with
Sack Truck Solid Wheels Pneumatic Tyres
120kg Capacity 150kg Capacity 300kg Capacity
• Lightweight aluminium • Ø210mm Solid tyres. • Strong tubular steel frame.
construction. • Strong tubular steel • Steel centred pneumatic
• Weighs only 6kg with construction with welded wheels for easy transport
a carrying capacity of 120kg. joints. over rough terrain.
• Fitted with Ø250mm • Steel wheel inserts for • Load protection rails to
pneumatic wheels for added strength and prevent damage.
easy movement over durability. • Features P-handle design
rough terrain. • Can be rested on handles to improve flat loading
• Features composite grip or flat loading. and enables one-handed
handles for added comfort • Fitted with rubber hand grips. operation.
and stability. • Model No. CST983 • Model No. CST998
• Model No. CST979 • List Price £39.95 • List Price £69.95
• List Price £79.95
Xmas Price Xmas Price Xmas Price
£55.95 exc
VAT £29.95 exc
VAT £49.95 exc
VAT
£65.74 inc
VAT
SAVE
30% £35.19 inc
VAT
SAVE
25% £58.69 inc
VAT
SAVE
29%
NEW
Stair Climbing 3-in-1 Sack Truck with 250 x 90mm Platform Truck with Sides &
Sack Truck Pneumatic Tyres 250kg Capacity Pneumatic Tyres 200kg Capacity
150kg Capacity • Ø250mm Pneumatic tyres.
• Tubular steel framework
with heavy-duty pneumatic
• Ø165mm Solid tyres. tyres allows transport of
• Tubular steel construction gives load over rough terrain.
150kg maximum load capacity. • Suitable for use as a
• Deep foot ensures cartons stay traditional sack truck or
on trolley during transit. at 45° with support castors
• Fitted with solid rubber wheels. in position.
• Handle design allows a firm grip • Features fold out load
whilst ascending and descending restrainer for use when
stairways. truck is in horizontal position.
• Ideal for delivery drivers and couriers. • Adapts between
• Suitable also for multi-level configurations without need
factories and offices. for tools in seconds.
• Model No. CST985 • Model No. CST989
• List Price £79.95
• Heavy-duty steel with hinged mesh construction.
• Drop-down sides, for easy loading, are also removable,
allowing use as a flatbed for oversized items.
• Steel centred pneumatic wheels allow transport over the
toughest terrain.
• Cart Size:
930 x 480 x 220mm.
Xmas Price Xmas Price • List Price Xmas Price • Model No. CST997
• List Price £129.95
£109.95
£56.95 exc
VAT
SAVE
£74.95 exc
VAT
SAVE
£89.95 exc
VAT
SAVE
£66.92 inc
VAT 29% £88.07 inc
VAT 32% £105.69 inc
VAT 31%
Pallet Trucks Hydraulic Platform Trucks
2000kg Capacity
• Heavy-duty construction.
• Fitted with 2 fixed and
2 swivel composite wheels
for easy rolling over rough
workshop and warehouse
floors.
• Swivel wheels fitted with
foot-operated brake.
• One piece hydraulic unit
controlled by large rear mounted
foot pedal.
PT1150 • Safety release mechanism
positioned on handlebar for
smooth controlled descent.
• Suitable for garage, industrial
and warehouse applications.
PT1220 • Supplied with non-slip
platform cover for added
50
load security. HPT1
• Heavy-duty truck suitable for warehouse and general handling duties. SAVE
• Features polyurethane, non-marking wheels with sealed for life bearings all-around. UP TO
SAVE 31%
• Hydraulic unit with chromed ram piston for resistance to corrosion. UP TO
• Single loading rollers with drop nose for smooth pallet entry. 33% Model No. Platform Capacity List Xmas Price Xmas Price
Size (L x W) Price Exc VAT Inc VAT
Model No. Forks List Xmas Price Xmas Price
(Length x Overall Width) Price Exc VAT Inc VAT HPT150 705 x 450mm 150kg £249.95 £179.95 £211.44
PT1150 1150 x 550mm £399.95 £279.95 £328.94 HPT300 820 x 520mm 300kg £329.95 £229.95 £270.19
PT1220 1220 x 685mm £429.95 £289.95 £340.69 HPT500 815 x 500mm 500kg £419.95 £289.95 £340.69
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 53
3pc Scraper Set NEW 4pc 200mm 3pc Prybar Set
with Hammer Cap File Set with Hammer Cap
• Applications
include
gasket
scraping
and
windscreen
preparation. iegen
tools
• Broad hilt
• Selection of popular
design give • Drop-forged, heat treated, steel shafts for added strength.
second-cut files with
maximum control. • Fitted with comfort-grip handle and hammer cap.
soft grip handles for
• Cap permits careful • Lengths: 200, 300, 460mm.
comfort and control.
use with hammer. • Model No. S0558
• Contents; Round,
Three-square, Flat, • List Price £17.95
Half-round.
Xmas Price iegen Xmas Price • Model No. S0629
Xmas Price
tools • List Price £19.95
£9.95 exc
VAT
• Model No. £11.95 exc
VAT £9.95 exc
VAT
SAVE SAVE
iegen SAVE
£11.69 inc
VAT 45% S0856
• List Price £17.95
£14.04 inc
VAT 40% tools £11.69 inc
VAT 45%
12pc Punch & 600mm Magnetic 4pc Magnetic Pick-Up
Chisel Set Tool Holder & Inspection
Tool Kit
• Chrome
Vanadium
steel.
• Chemically
blackened for
added corrosion • Two heavy-duty
resistance. 5-section telescopic
• Contents: Cold Chisels; (Tools Not Included)
extending shafts.
10 x 140, 12 x 150, • Fully adjustable 50 x 80mm inspection mirror.
16 x 170mm, Taper Punch; Ø2 x 140mm, Pin Punches; • Wall or toolbox mounting magnetic rack.
• Size: 600 x 25mm. • Includes 3 magnetic heads, 1.5kg and 2.3kg fixed and one
Ø1.5 x 150, Ø3 x 150, Ø4 x 150, Ø5 x 150, Ø6 x 150, 2.3kg fully adjustable.
Ø8 x 150mm, Centre Punches; Ø6 x 110, Ø8 x 115mm. • Suitable for retaining frequently used steel tools.
• Supplied with fixing screws. • Model No. S0556
• Model No. S0802 • List Price £13.95
• List Price £29.95
• Model No. S0703
Xmas Price iegen Xmas Price • List Price £12.45 Xmas Price
£13.95 £6.95 £7.45
exc tools exc exc
VAT VAT VAT
SAVE SAVE
iegen SAVE
iegen
£16.39 inc
VAT 53% £8.17 inc
VAT 44% tools £8.75 inc
VAT 47% tools
15pc Ribe Bit & Holder Set 64pc Power Tool/Security Bit Set Ratchet Crimping Tool
• Manufactured from hardened
• Heat treated Chrome Vanadium
steel bits. and tempered Chrome Insulated
• Contents: 10mm Hex
Bits; M6, M7, M8,
Vanadium steel.
• Popular range
Terminals
M10, M12, of 25mm
M13, and
M14, 50mm,
each slotted,
in 30 Phillips,
& Pozi, hex,
75mm TRX-Star*
and security • All steel construction with vinyl grip handles
lengths,
TRX-Star* bits and hardened and tempered jaws.
3/8"Sq Drive
for a variety of • Ratchet action ensures consistent crimp tension.
Bit Holder.
• Chrome Vanadium NEW applications. • Overall Length: 220mm.
• Terminal Suitability: 0.5-1.0mm2, 1.5-2.5mm2, 4.0-6.0mm2.
steel, 3/8"Sq drive, bit holder. • Model No. S0886
• List Price £17.95 iegen • Model No. S0604
• Model No. S0871 tools
• List Price £23.95
Xmas Price • List Price £14.95
Xmas Price NEW Xmas Price
£8.95 exc
VAT £10.95 exc
VAT £12.95 exc
VAT
SAVE
iegen SAVE SAVE
iegen
£10.52 inc
VAT 40% tools £12.87 inc
VAT 39% £15.22 inc
VAT 46% tools
4pc Adjustable Wrench Set 3pc Extra-Long 12pc Hammer-Thru
• Comprises: S0450, S0451, Hammer-Thru Screwdriver
S0452, S0453.
• Sizes: Screwdriver Set
150,
200, Set • Chrome
Vanadium
250,
steel
300mm.
hammer-
• Jaw
thru
Capacity:
shafts.
20, 25, 30,
• Contents:
36mm.
• Hardened and tempered 450mm Chrome Vanadium steel Phillips; #2 x 38,
• Hardened and heat
hammer-thru hex shafts with satin polished finish. #0 x 75 (not hammer-thru),
treated steel.
• Shot blasted and magnetized tips. #1 x 75, #2 x 100, #3 x 150, #3 x 200mm,
• Satin chrome finish.
• Model No. S0449 • Contents: Phillips; #2 x 450mm, #3 x 450mm, Slotted; 6 x 38, 3 x 75 (not hammer-thru), iegen
Slotted; 8 x 450mm. 5 x 75, 6 x 100, 8 x 150, 9 x 200mm. tools
• List Price £26.95
• Model No. S0843 • Model No. S0641
Xmas Price Xmas Price • List Price £15.95
Xmas Price • List Price £24.95
£15.95 exc
VAT
SAVE
iegen
tools
£9.95 exc
VAT
SAVE
iegen
tools
£12.95 exc
VAT
SAVE
£18.74 inc
VAT 41% £11.69 inc
VAT 38% £15.22 inc
VAT 48%
54 Prices exclude VAT unless stated otherwise Promotion Code XMAS10
10pc Stubby Combination Spanner 12pc Combination Spanner 8pc Combination Spanner
Set - Metric Set - Metric Set - Whitworth
• Chrome • Chrome • Chrome Vanadium
Vanadium steel. Vanadium steel.
• Hardened, steel. • Hardened,
tempered and • Hardened, tempered
chrome plated tempered and nickel
for corrosion and nickel chrome
resistance. chrome plated plated for
• Open end and for corrosion corrosion
twelve-point resistance. resistance.
WallDrive® • Open end and • Open end and twelve-point
ring combination. twelve-point WallDrive® WallDrive® ring combination.
• Model No. S0561 ring combination. • Sizes: 1/8”WW, 3/16”WW, 1/4”WW, 5/16”WW, 3/8”WW,
• List Price £22.95 • Model No. S0563 7/16”WW, 1/2”WW, 9/16”WW.
• List Price £29.95 • Model No. S0870
• List Price £31.95
iegen iegen NEW iegen
tools tools tools
Xmas Price Xmas Price Xmas Price
£13.95 exc
VAT
SAVE
£16.95 exc
VAT
SAVE
£19.95 exc
VAT
SAVE
£16.39 inc
VAT 39% £19.92 inc
VAT 43% £23.44 inc
VAT 38%
10pc Extra-Long Combination Spanner 6pc Double Flexi-Head Socket 4pc TRX-Star* Double End
Set - Metric Spanner Set - Metric Spanner Set
• Drop-forged Chrome Vanadium steel flexi-head • Drop-forged
• Chrome socket spanners with Chrome Vanadium
Vanadium slim style steel spanners.
steel. shafts. • Hardened,
• Hardened, • Hardened tempered
tempered and nickel and and
chrome plated for tempered nickel
corrosion resistance with a fully chrome
with a fully polished mirror finish. polished finish for plated
• Open end and twelve-point strength and for corrosion resistance. iegen
WallDrive® ring combination with tools
corrosion resistance. • Fully polished and mirror finished.
extra-long shaft. • Contents: 8-19mm. • Four spanners covering eight sizes of TRX-Star* fixings.
• Contents: 10-19mm. • Model No. S0894 • Contents: E6 x E8, E10 x E12, E14 x E18, E20 x E24.
• Model No. S0832 • List Price £49.95
• List Price £41.95
iegen • Model No.
tools S0850
Xmas Price Xmas Price Xmas Price • List Price £15.95
£23.95 exc
VAT
SAVE
£27.95 exc
VAT
SAVE
£8.95 exc
VAT
iegen SAVE
£28.14 inc
VAT 43% £32.84 inc
VAT 44% tools £10.52 inc
VAT 44%
50pc Multi-Purpose Spanner 25pc Combination
Set - Metric Spanner Set - Metric
• Multi-purpose
Chrome • Chrome Vanadium steel
Vanadium steel combination spanners.
spanners, fully • Hardened, tempered and nickel
polished with mirror chrome plated for corrosion resistance.
finish. • Fully polished mirror finish.
• Hardened, tempered • Open end and twelve-point WallDrive® ring
for corrosion resistance. iegen combination.
• Spanners individually tools
• Sizes: 6-32mm.
packed in heavy-duty • Model No. S0564
tool wrap. • List Price £99.95
• Model No. S0565
• List Price £149.95
FREE
150mm Stubby
Adjustable Wrench
• Model No. S0826
Xmas Price FREE Xmas Price • List Price £6.95
£69.95 £53.95
150mm Stubby
exc exc
VAT Adjustable Wrench VAT
• Model No. S0826
SAVE SAVE
iegen
£82.19 inc
VAT 53%
• List Price £6.95
£63.39 inc
VAT 46% tools
16pc Ratchet Combination 12pc Flexible Head Ratchet Digital Electronic Vernier
Spanner Set - Metric Combination Spanner Set - Metric Calliper 0-150mm/0-6"
• Chrome Vanadium steel
• Chrome Flexi-Head combination
Vanadium ratchet spanner set.
steel.
• 72-Tooth,
• Sizes: 8-19mm. iegen
• 72-Tooth tools
ratchet ring ratchet ring
and gear set and gear set
requiring only 5º requiring only • 8mm LCD display.
rotation to pick 5º rotation to pick • Lightweight carbon fibre
up next ratchet tooth. up next ratchet tooth. construction.
• Ideal for applications • Model No. S0635 • Metric and Imperial
where space is limited. • List Price £129.95 readings with conversion
• Sizes: 8-24mm. between the two.
• Model No. S0869 SAVE iegen
tools • Zero setting control for
• List Price £159.95 54% comparative measurement.
• Model No. S0707
Xmas Price iegen
tools Xmas Price FREE Xmas Price • List Price £31.95
150mm Stubby
£82.95 exc
VAT
SAVE
£59.95 exc
VAT Adjustable Wrench
• Model No. S0826
£16.95 exc
VAT
SAVE
£97.47 inc
VAT 48% £70.44 inc
VAT
• List Price £6.95
£19.92 inc
VAT 47%
Promotion Code XMAS10 Prices exclude VAT unless stated otherwise 55
1/2"Sq Drive Digital Torque Wrench TORQUES 8 Drawer Rollcab with 707pc Tool Kit
IN BOTH
with Angle Function 10-200Nm DIRECTIONS
NEW
• Rollcab Model
• Features No. AP2408
angle setting • Overall Dimensions
display up to 360° (W x D x H):
providing accurate and fast 766 x 465 x 958mm
torque application, removing the • 6 x Medium
need for angle gauges. Drawers
• Preset desired torque levels or track peak and working • 2 x Large
torques using simple push-button menu. Drawers
• Stores up to 50 readings. • Package
• Selectable read-out in lb.in, lb.ft, Nm or degrees. Model No.
• Accurate to ±2% between 20% and 100% of wrench’s stated capacity. AP2408TTC08
• Tested in accordance with BS EN ISO 6789:2003. • Package
• Range: 10-200Nm (29.5-147.5lb.ft, 354-1770.2lb.in). List Price
Xmas Price • Model No. STW305 £1,977.55
£249.95 exc • List Price £399.95
VAT
SAVE
£293.69 inc
VAT 38%
1.8tonne
Folding Crane
• Lifts 1.8tonne at 1020mm
jib extension.
• Folds for easy storage, freeing
valuable workshop space
when not in use.
• Bottle jack type hydraulic
unit for economy.
• Tested to 25% overload.
• Some self-assembly required. Ball Bearing
• Model No. PH20
• List Price £369.95 Drawer Slides
Xmas Price Xmas Price
* TRX-STAR and TRX-TS tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.
£259.95 exc
VAT
SAVE
£799.95 exc
VAT
SAVE
£305.44 inc
VAT 30% £939.94 inc
VAT 60%
(Gas bottle not included)
110bar Pressure Washer with TSS NEW 250Amp Professional Gas/No-Gas
Rotablast Nozzle® 230V MIG Welder with Euro Torch
• Heavy-duty high output transformer and forced
with Accessory Kit air cooling to maximize duty cycle performance.
• 250Amp Maximum current.
• Lightweight yet powerful unit
• Supplied with a high quality BINZEL® MB25AK
designed for light trade and domestic use.
Euro torch, 3mtr earth cable, 1.4mtr of gas hose,
• Features Automatic Total Stop System (TSS) which
twin gauged gas regulator, 1kg spool of 0.8mm
switches the motor on and off when the lance trigger
wire, 0.8 and 1.0mm tips.
is operated, prolonging the motor life.
• Supplied with 3mtr hose and accessory kit including
• Model No. MIGHTYMIG250 NEW
• List Price £1499.95
high/low pressure lance, rotary and fixed brush attachments
and patio brush attachment with integral detergent container.
• Features Rotablast Nozzle® which helps develop the same FREE
Effective Cleaning Power (ECP) as a 2700psi washer. Solar Powered Welding
• Includes foam applicator for pre-wash. Helmet Shade 9-13
• Model No. S0825
• Model No. PC2701 • List Price £179.95
• List Price £199.95
Xmas Price Xmas Price
£119.95 exc
VAT
SAVE
£999.95 exc
VAT
SAVE
£140.94 inc
VAT 40% £1174.94 inc
VAT 33%
S10
