Docstoc

Tc Bandwidth Management - Excel

Document Sample
Tc Bandwidth Management - Excel Powered By Docstoc
					                                                                                                                                                            SCHEDULE OF COMPLIANCE




        PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                             COMPLIANCE STATEMENT


NO                                  DESCRIPTION                                          MAKE /              COMPLY              DEVIATION                     LETTER/
                                BRIEF SPECIFICATIONS                                     BRAND /             YES/NO                FROM                       CATALOG
                                                                                          MODEL                                SPECIFICATION                   YES/NO
A    STRUCTURED CABLING
     Tenderers Must fully comply with JKR Specification on STRUCTURED CABLING SYSTEM, GENERAL PRACTICES FOR ICT SYSTEM INSTALLATION and CONDUIT & TRUNKING (LS
     1)

     All ICT infrastructure materials Must support the following application:- 10/100/1000Mbps Ethernet, 4 Mbps /16 Mbps Token Ring applications, ATM 155.5 Mbps, ATM 622
     Mbps, Gigabit Ethernet, Broadband Video and future applications, VOIP Applications and Comply with testing certificates from Under-writer's Laboratories (UL) listed, and
     with FCC CFR47 part 68.
A1   UTP Cabling
     UTP Cat 6 Cable
       Tenderers must attach UL & ETL certification

       Tenderers as a certified installers must attach a Letter of Support and
       certified installers from Manufacturer or a local sole distributor

       - The horizontal cable shall be 4 pairs and meet the quality and
       performance criteria specified by all International, European (EIA/TIA-568)
       and American Cable Standards (IEC 61156-5,EN 50288-6-1) for Category 6
       cables
       - The cable shall support shall be of the same technology as PowerCat type
       for all subsystems, providing both front and rear labelling options, plus
       integrated radius minders cable management trays to ensure optimum
       cable installation and termination
       - Warranty for Structure Cabling System Component - Minimum 25 years
       for all end-to end permanent against manufacturing defects and
       minimum warranty against workmanship at least 2 years from the date of
       installation.



A2   UTP Cat 6 Accessories




                                                                                                                                                                           Page 1 of 8
                                                                                                                                                                    SCHEDULE OF COMPLIANCE




        PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                            COMPLIANCE STATEMENT


NO                                   DESCRIPTION                                              MAKE /              COMPLY               DEVIATION                       LETTER/
                                 BRIEF SPECIFICATIONS                                         BRAND /             YES/NO                 FROM                         CATALOG
                                                                                               MODEL                                 SPECIFICATION                     YES/NO
       Tenderers must attach UL & ETL certification
       Modular jacks compliant ISDN 8-position/8-conductor standard type and
       shall be capable of receiving conventional 4, 6 and 8 pin jack/plug of 23/24
       AWG solid wire. The RJ45 jack offered should confirm to EIA-T568A or EIA-
       T568B wiring schemes.
       Must use European type Angle faceplate(1 gang/ 2 gang) with/without
       adaptors (same dimension of electric socket)
       Patch Panel shall be available in 24 jacks configuration in one rack unit and
       shall fit into a 19" rack. Wiring management should occupy the same space
       as the panel and supports Universal EIA 568A/B wired

       3.0 meter UTP Cat 6 (EIA/TIA) factory terminated workstation cords c/w
       RJ45 connectors and boots
       1.0 meter UTP Cat 6 (EIA/TIA) factory terminated patch cords c/w RJ45
       connectors and boots
       1.5 meter UTP Cat 6 (EIA/TIA) factory terminated patch cords c/w RJ45
       connectors and boots
A3   Fiber Optics Cabling
     OM3 "Laser Optimised" Fiber Optics Cable, Each fibre shall be tight buffered with color-coded PVC for identification for multi-core fibre optic cable. The cable shall meet the
     quality and performance criteria specified by all International, European and American Cable Standards (IEC 60793, EIA/TIA FOTP )
       Tenderers must attach UL & ETL latest certification
       8-core 50/125 µm multimode indoor fiber optics cable
       24 port 1U fiber optics patch panels with fully loaded SC-SC duplex
       adaptors
       8 port 1U fiber optics patch panels with fully loaded SC-SC duplex adaptors

       SC connecter c/w 1mtr pigtails
       3mtr duplex fiber patch cord factory terminated with SC-LC ceramic
       connectors at each end.




                                                                                                                                                                                   Page 2 of 8
                                                                                                                                                                   SCHEDULE OF COMPLIANCE




           PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                                COMPLIANCE STATEMENT


NO                                      DESCRIPTION                                           MAKE /               COMPLY              DEVIATION                      LETTER/
                                    BRIEF SPECIFICATIONS                                      BRAND /              YES/NO                FROM                        CATALOG
                                                                                               MODEL                                 SPECIFICATION                    YES/NO
 B      Active Network Equipment & Accessories
        All switches design and architecture must be submitted to JKR for approval and Must fully compliant and operational with the client existing network design environments.

          Layer 2 PoE Access Switch
 i.       24 auto-negotiating 10BASE-T/100BASE-TX/1000BASE-T ports, 4 of which
          are dual-personality 10/100/1000 or SFP Gigabit ports
 ii.      2 rear slots for dual-port 10-Gigabit modules, XFP-based, SFP+, or CX4 local
          connection
iii.      128.0 Gbps switching capacity, with 95.2 Mpps forwarding rate (maximum)


iv.       Layer 2 switching: Full-rate nonblocking on all ports, full-/half-duplex
          autonegotiation, flow control, multicast filtering, IEEE 802.1Q VLAN
          support, IEEE 802.1p traffic prioritization, IEEE 802.3ad Link Aggregation
          Control Protocol, IGMP snooping
 v.       Layer 3 switching: Hardware-based, static routing
vi.       Security: IEEE 802.1X network login, local and RADIUS server
          authentication, automatic VLAN assignment via RADIUS server, Access
          Control Lists (ACLs)

 vii      Intelligent Management Center (IMC)
viii.     CLI via console or Telnet, embedded web management interface, SNMP
          management


          Full Layer 3 PoE Access Switch




                                                                                                                                                                                    Page 3 of 8
                                                                                                                                SCHEDULE OF COMPLIANCE




        PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                              COMPLIANCE STATEMENT


NO                                    DESCRIPTION                                         MAKE /     COMPLY     DEVIATION         LETTER/
                                  BRIEF SPECIFICATIONS                                    BRAND /    YES/NO       FROM           CATALOG
                                                                                           MODEL              SPECIFICATION       YES/NO
 i.     24 Gigabit SFP ports, 4 of which are dual-personality operating as SFP or
        auto-negotiating 10BASE-T/100BASE-TX/1000BASE-T; RPS power port (-48
        VDC); RJ-45 console port; 2 dedicated stacking ports; 1 optional module
        slot

 ii.    8-Port 1000BASE-X Module
        Performance: 192.0 Gbps switching capacity, 136.9 Mpps forwarding rate,
        maximum (with 2-port 10-Gigabit module); 107.1 Mpps forwarding rate,
        maximum (with no optional modules)
iii.    Stacking: Up to 8 switch units, 448 Gigabit ports, with 16 10-Gigabit ports;
        3Com XRN® Stacking linked in active/active load-sharing configuration via
        built-in dedicated 48 Gbps stacking ports (96 Gbps full duplex)


iv.     Layer 2: IEEE 802.Q VLANs, 802.3ad LACP, 802.3x full-duplex flow control,
        802.1D STP, 802.1w RSTP, Fast Start with BDPU protection, IGMP v1/v2
        multicast filtering

 v.     Layer 3: Hardware-based routing, ECMP, ARP, virtual interfaces,
        static/dynamic routing, RIPv1/v2, OSPF, ASIC Layer 3 forwarding, PIM-DM,
        PIM-SM, IGMP v1/v2 snooping, DHCP Relay

vii.    Resiliency: IEEE 802.3ad LACP, hot-swappable switch units, DC RPS
        provides N+1 power redundancy, seamless failover between AC and DC
        modes

viii.   Convergence: Weighted Round Robin/Fair/Strict Priority Queuing, IEEE
        802.1p Class of Service/Quality of Service (CoS/QoS), IPv6 classification,
        prioritization and filtering, ingress/egress rate limiting, webcache-based
        bandwidth management




                                                                                                                                             Page 4 of 8
                                                                                                                                                                 SCHEDULE OF COMPLIANCE




          PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                              COMPLIANCE STATEMENT


NO                                    DESCRIPTION                                            MAKE /              COMPLY              DEVIATION                      LETTER/
                                  BRIEF SPECIFICATIONS                                       BRAND /             YES/NO                FROM                        CATALOG
                                                                                              MODEL                                SPECIFICATION                    YES/NO
ix.      Security: RADIUS; PAP/CHAP/EAPoL (EAP over LAN) authentication; session
         accounting; SSH; Access Control Lists; packet filtering; SNMP v3 encryption,
         IEEE 802.1X Network Login; authentication, VLAN autoinitiation and QoS
         profiling; multilevel access privileges; administrative password recovery;
         management activity logs

x.       Intelligent Management Center (IMC)
xi.      Other management: Web-based GUI, SNMP v1/2/3, telnet, CLI, SSH, RMON-
         1 (statistics, history, alarms, events), multiple software images, bank swap,
         statistics gathering and reporting, remote polling/ping (unicast mode only),
         software backup/restore, Xmodem, FTP, TFTP, telnet, IP address allocation
         via manual/DHCP/BOOTP

xii.     IEEE standards: IEEE 802.1D (STP), 802.1p (CoS), 802.1Q (VLANs), 802.1w
         (RSTP), 802.1X (Security), 802.3 (Ethernet), 802.3ad (Link Aggregation),
         802.3ab (1000BASE-T), 802.3ae (10G Ethernet), 802.3i (10BASE-T), 802.3u
         (Fast Ethernet), 802.3x (Flow Control), 802.3z (Gigabit Ethernet)


 C     TELECOMMUNICATION CLOSET ROOM (TC)
       Tenderers Must fully comply with JKR Specification on TECHNICAL REQUIREMENTS FOR SERVER ROOM AND TCR
       Equipment Rack must consist of the following Standard criteria: SIRIM Approved(Please submit cert. approval), vertical (four side) cable managements, ventilation fans,
       lockable lift-off perforated side panels, front tempered glass/perspex door, 2 nos equipment trays and perforated enclose base panel c/w original specification for earthing
       for equipment rack.

         Floor Standing 19" 42U(H) x 800mm(W) x 1000mm(D) Completely-Knocked-
         Down) CKD Equipment Rack c/w power supply (15 nos 13A s/s/o)




                                                                                                                                                                                Page 5 of 8
                                                                                                                                          SCHEDULE OF COMPLIANCE




        PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                         COMPLIANCE STATEMENT


NO                                 DESCRIPTION                                           MAKE /        COMPLY               DEVIATION       LETTER/
                               BRIEF SPECIFICATIONS                                      BRAND /       YES/NO                 FROM         CATALOG
                                                                                          MODEL                           SPECIFICATION     YES/NO
       Wall Mounted 19" 12U(H) x 600mm(W) x 500mm(D) Equipment Rack c/w
       power supply (4 nos 13A s/s/o)
D    TELEPHONE INFRASTRUCTURE & SYSTEM
     Tenderers Must fully comply with JKR Specification aS stated in TECHNICAL REQUIREMENTS OF TELEPHONE SYSTEM (LS 16)
D1   Manhole
       JC9C 4 way c/w RC Cover
       JRC7 4 way/ 2 way c/w RC Cover
D2   Ducting
       100mm diameter underground uPVC ducting
D3   Cables & accessories
       200 pairs IN/OUT Wall Mounted Metal telephone distribution
       10 pair disconnection 110 type terminal module
       20 pairs indoor 0.63mm (10 lbs) Telephone Riser Cable
       30 pairs indoor 0.63mm (10 lbs) Telephone Riser Cable
       50 pairs indoor 0.63mm (10 lbs) Telephone Riser Cable
       100 pairs indoor 0.63mm (10 lbs) Telephone Riser Cable
       200 pairs Jelly Filled Cable
       10 pairs Jelly Filled Cable
       1 Pair PRI ISDN Coaxial Cable
       10 pairs lightning overvoltage magazine complete with 230 volts
       overvoltage arrestors come with fail/safe devices.
E    Hybrid IP-PABX System
     Tenderers Must fully comply with the specification and standards that are stated.
     Controller the following features & components :-
       Power Voltage AC100V - 240V
       External Battery +36V (+12V x 3), built-in interface
       Memory Backup duration: 7 years
       Serial Interface port: USB 1 port
     Operating Environment
       Temperature : 0ºC to 40ºC
       Humidity : 10 - 90%




                                                                                                                                                       Page 6 of 8
                                                                                                                               SCHEDULE OF COMPLIANCE




       PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                   COMPLIANCE STATEMENT


NO                               DESCRIPTION                                      MAKE /           COMPLY     DEVIATION          LETTER/
                             BRIEF SPECIFICATIONS                                 BRAND /          YES/NO       FROM            CATALOG
                                                                                   MODEL                    SPECIFICATION        YES/NO
     Structure
       Free slot style
       can be accomodated into 19" rack
     Networking features
       Alternated routing
       ARS with VOIP
       Transfer to network PBX
       Virtual private network (VPN)
       VOIP Network (Built in IP-GW)
     Details of Brand/Model
       Main Unit cabinets with 6 slots
       Expansion shelf cabinets with 6 slots
       Trunk ISDN PRI Card of 30 channels
       Digital Extension Card of 16 channel
       Analogue Extension card of 24 channel
       VOIP Gateway card of 4 channel
       Power Supply
       Digital Phone
       Analogue Single Line Phone
       Backup Battery
       Call Billing system
       PC Console System
F    Earthing System & Labellin and Tagging
     Earthing for telecommunication equipment for Server Room and TCR in
F1   accordance to recommendations contained in ANSI/TIA/EIA-607
     Telecommunication Bonding and Grounding Standard. Impedance Rating shall
     be less than 1 Ohm.
     Earthing Rod
     Copper Tape
F2   Labelling & Tagging
     Tenderers Must fully comply with JKR Specification on TECHNICAL REQUIREMENTS FOR LABELING STANDARD




                                                                                                                                            Page 7 of 8
                                                                                                                                                SCHEDULE OF COMPLIANCE




        PEMASANGAN INFRASTRUKTUR JARINGAN TEMPATAN (LOCAL AREA NETWORK) DAN KERJA-KERJA BERKAITAN BAGI MAHKAMAH SYARIAH NEGERI SEMBILAN

                                                                             COMPLIANCE STATEMENT


NO                                   DESCRIPTION                                              MAKE /          COMPLY              DEVIATION       LETTER/
                                 BRIEF SPECIFICATIONS                                         BRAND /         YES/NO                FROM         CATALOG
                                                                                               MODEL                            SPECIFICATION     YES/NO

     Provide and install labeling of equipments, cable, patch panel, rack, faceplate,
     trunking, cable marker. All cables must be labeled with heavy duty self
     lamination label and polyster for patch panel or equivalent and managed
     using "Velcro" cable tie.

G    Cabling Pathways and accessories
     Tenderers Must fully comply with JKR Specification on EMAL List
       Hot Dipped Metal Galvanised Trunking c/w trunking accessories, T-Joint,
       Angle/ Straight Joint factory terminated
       uPVC Conduit & accessories



     Signature of tenderer: ……………………………………                                              Signature of withness: ……………………………………



     Name: ………………………………………………………                                                        Name: …………………………………………………………



     Date: …………………………..                                                                 Date: …………………………..



     Tenderer's Seal:

     Address: …………………………………………………………...………                                              Address: ……………………………………………………………………..




                                                                                                                                                             Page 8 of 8

				
DOCUMENT INFO
Description: Tc Bandwidth Management document sample