ARCHITECT AND ENGINEER BID SPECIFICATION
PELCO CE4/CE9/CE16 Series Desktop Consoles
Design shall be a desktop console for video signal equipment and related components. Desktop console shall incorporate a "building block" modular design allowing expansion and upgrading to meet specific installation requirements. Console top shall be sturdy enough to support a monitor for optimum utilization of space. Top and bottom panels shall be constructed of .074-inch (1.88 mm) cold-rolled steel. Rear panel shall be constructed of .035-inch (0.89 mm) cold-rolled steel. (Rear panel not included on the CE4 model desktop consoles.) Side panels shall be constructed of 0.80-inch (0.203 mm) formed aluminum. Finish of panels shall be available in black or gray.
CE4 DESKTOP CONSOLES Design shall have 7 inches (17.78 cm) of vertical rack space, permitting the installation of four (4) 1-3/4 inch (4.445 cm) high rack units. CE4 Desktop Console Dimensions: Standard Depth Models 8.75"H by 20.50"W by 14"L (22.2 cm by 52.1 cm by 35.6 cm) Extended Depth Models 8.75"H by 20.50"W by 24"L (22.2 cm by 52.1 cm by 60.96 cm) CE9 DESKTOP CONSOLES Design shall have 15.75 inches (40.0 cm) of vertical rack space, permitting the installation of nine (9) 1-3/4 inch (4.445 cm) high rack units. CE9 Desk Top Console Dimensions: Standard Depth Models 17.50"H by 20.50"W by 14"L (44.5 cm by 52.1 cm by 35.6 cm) Extended Depth Models 17.50"H by 20.50"W by 24"L (44.5 cm by 52.1 cm by 60.96 cm) CE16 DESKTOP CONSOLES Design shall have 28 inches (71.12 cm) of vertical rack space, permitting the installation of sixteen (16) 1-3/4 inch (4.445 cm) high rack units.
CE16 Desk Top Console Dimensions: Standard Depth Models 29.75"H by 20.50"W by 14"L (75.6 cm by 52.1 cm by 35.6 cm) Extended Depth Models 29.75"H by 20.50"W by 24"L (75.6 cm by 52.1 cm by 60.96 cm)
Consoles shall be UL listed. The following options shall be available when more than one desktop console is used. Options to expand design horizontally by one full width. Options to fill the space between two consoles positioned at 90-degrees. Options to fill the space between two or three consoles positioned at 45-degree angles. Manufacturer shall make available an assortment of blank filler panels to cover from one to all available rack space. Options shall be available in standard and extended depth with black or gray finish. Product shall be backed by Pelco's established Technical Assistance Program (TAP) operating 24 hours per day, 365 days per year. A toll-free 800 number shall be available for calls made from within the United States and Canada. All warranty and non-warranty service and repairs shall be made in accordance with Pelco's guaranteed one-day turnaround policy.