Docstoc

POWDER COATING

Document Sample
POWDER COATING Powered By Docstoc
					POWDER
COATING
POWDER COATING




ABOUT POWDER COATING                                                        KEY BENEFITS
Powder coating is an advanced yet                                               Polyester Powder Coating
simple way of spray-painting a very                                             Duplex Coating
fine, dry plastic powder onto a metal
surface. Removal of oil, soil, lubricant                                        Hot Dip Galvanize - Total Corrosion
greases, metal oxides, welding scales                                           Protection
etc. is essential prior to the powder                                                               o
                                                                                Full Fine Fettle - T create smooth surface
coating process. It can be done by a
variety of chemical and mechanical                                              Etch Galvanized Surface -
methods depending on the size and                                                o
                                                                                T create key for coating
material of the part to be powder                                               New Electrostatic Powder Spray -
coated. As the powder paint cloud                                                o
                                                                                T give even surface coating
gently leaves the front of the spray
gun, it is charged with static electricity.                                                                      o
                                                                                Modern Gas Fired Curing Oven - T give
                                                                                even temperature control throughout oven
The charge attracts the powder paint
to the part that requires coating.The                                           Special Packaging - For safe transportation
part is then placed in an oven, where                                           of product
it bakes at 220 degrees centigrade for
                                                                                Transport Savings - One stop metals
10 minutes.While in the oven, the                                               finishing
powder paint melts and flows into a
beautiful and durable finish. Primers
are not necessary.
There are no unsightly runs or drips, as often results with     There are no limitations to
the use of wet paint.                                           the choice of colours for
                                                                powder coating, select
Powder coating is environmentally friendly because the          from a huge range of RAL
over-spray is reused, with no solvents, powder paint does       and BSI quality colours.
not pollute the air.




                             Call us today on 0191 410 4421 for further information


BIRTLEY BUILDING PRODUCTS LTD
MARY AVENUE, BIRTLEY,
COUNTY DURHAM, DH3 1JF
TELEPHONE: 0191 410 4421
                                               GA   BS EN ISO          No. FS13890            HILL & SMITH HOLDINGS PLC
FAX: 0191 492 1817                                  1461:1999
E MAIL: GALVANIZING@BIRTLEY-BUILDING.CO.UK
INTERNET:WWW.BIRTLEY-BUILDING.CO.UK
SPECIALIST
PAINTING
SPECIALIST PAINTING




                                                                              WET SPRAY PAINTING
                                                                                  Specialist paint shop
                                                                                  14m Extraction booth
                                                                                  Facility to handle up to 4 Tonnes
                                                                                  Multi-coat systems
                                                                                  Paint post galvanizing
                                                                                  Fast quotation service
                                                                                  Collection & delivery service
                                                                                  Technical assistance available

                                                            Modernised airless system to monitor paint application
                                                            Wet film readings taken to ensure correct DFT’s
                                                             (Dry Film Thickness)
                                                            Daily humidity testing
                                                            Working in partnership with major paint manufacturers


                         Call us today on 0191 410 4421 for further information


BIRTLEY BUILDING PRODUCTS LTD
MARY AVENUE, BIRTLEY,
COUNTY DURHAM, DH3 1JF
TELEPHONE: 0191 410 4421
                                         GA  BS EN ISO         No. FS13890           HILL & SMITH HOLDINGS PLC
FAX: 0191 492 1817                           1461:1999
E MAIL: GALVANIZING@BIRTLEY-BUILDING.CO.UK
INTERNET:WWW.BIRTLEY-BUILDING.CO.UK
SHOT
BLASTING
SHOT BLASTING




PREPARATION
Chamber working size 15.5m x 4.5m x 3m with a fully
enclosed modern extraction
systems.
This chamber size will
accommodate most general shot
blasting requirements.
Experienced operators ensure
complete surface preparation.
Removal of contaminants prior to
galvanizing
Increase surface profile of base
metal to achieve heavier galvanized
coating, increasing corossion
protection.
                                                               The equivalence of the standards is summarised
                                                               in the following table:
                                                                                        ISO 8501-1    Swedish      SSPC NACE
SURFACE PREPARATION STANDARDS                                                              (1988)     Standard    (1982)
                                                                                         BS7079:A1   SIS055900
                                                                                           (1988)      (1967)
There are several National and International Standards          White Metal                Sa 3        Sa 3        SP5   SP1
which define the visual assessment of surface cleanliness of
steel before application of paint and related products.         Near White Metal          Sa 2.5      Sa 2.5      SP10   SP2
                                                                Commercial Blast           Sa 2        Sa 2        SP6   SP3
                                                                Brush-Off Blast            Sa 1        Sa 1        SP7   SP4

                             Call us today on 0191 410 4421 for further information


BIRTLEY BUILDING PRODUCTS LTD
MARY AVENUE, BIRTLEY,
COUNTY DURHAM, DH3 1JF
TELEPHONE: 0191 410 4421
                                               GA  BS EN ISO            No. FS13890          HILL & SMITH HOLDINGS PLC
FAX: 0191 492 1817                                 1461:1999
E MAIL: GALVANIZING@BIRTLEY-BUILDING.CO.UK
INTERNET:WWW.BIRTLEY-BUILDING.CO.UK
BESPOKE
STEELWORK
ARTISTIC SCULPTURES - STREET FURNITURE
ARTISTIC SCULPTURES AND STREET FURNITURE




PREPARATION
Birtley Galvanizers are part of Britain’s largest galvanizing
group with a company policy that
no job is too large and no
customer is too small.
With their “State of the Art
Technology” plant they cater for
steel products of all sizes and
quantities.
We can accommodate major
structural steel fabricators to
individual artistic steel sculptors.
    Bath length 10m,
    depth 3.2m, width 1.5m
    Component size 9.8m, depth 2.7m, width 1.3m
Galvanizing is probably the most environmentally friendly
process to prevent corrosion.

TOTAL METAL FINISHING
To compliment our galvanizing facilities, our in house
Specialist Paint Finishing, Powder Coating and Shot Blasting
divisions give a complete metal finishing service.
    48 hour standard regular turnaround
    24 hour premium turnaround for those rush jobs
    Collection and delivery service


                              Call us today on 0191 410 4421 for further information


BIRTLEY BUILDING PRODUCTS LTD
MARY AVENUE, BIRTLEY,
COUNTY DURHAM, DH3 1JF
TELEPHONE: 0191 410 4421
                                                  GA  BS EN ISO   No. FS13890   HILL & SMITH HOLDINGS PLC
FAX: 0191 492 1817                                    1461:1999
E MAIL: GALVANIZING@BIRTLEY-BUILDING.CO.UK
INTERNET:WWW.BIRTLEY-BUILDING.CO.UK

				
DOCUMENT INFO