GIS 8PG ETD-HP (Page 2)

Document Sample
GIS 8PG ETD-HP (Page 2) Powered By Docstoc
                                                                                   156 Pane Road
                                                                                   Newington, CT
                                 EASTERN TOOL & DIE, INC.

                                                                                                            Control System

                                                                                            (2) DeVlieg

                                        DeVlieg Spiramatic, Model 4K-72 Jig Mill

                                                                                      DeVlieg Air Lift Rotary Table
                                SALE DATE:
                                Tuesday, July 11, 2000 - 10:00 A.M.
                                Monday, July 10, 2000 - 9:00 A.M. - 4:00 P.M.

                                                       AUCTION MANAGED AND CONDUCTED BY:
                              Auction Information
                                                                      EASTERN TOOL & DIE, INC.
                                                                      156 Pane Road, Newington, CT
                                  SALE DATE: Tuesday, July 11, 2000 - 10:00 A.M.
                             Inspection: Monday, July 10, 2000 - 9:00 A.M. - 4:00 P.M.
TERMS                                                                                 CATERER
1. All announcements made on auction day shall take precedence over previous-          A caterer will be on-site for your convenience.
   ly distributed information.
2. Any deletions and additions to the catalog quantities will be announced by the AIRPORTS
   Auctioneer at the time of the auction sale. All bidders are advised to inspect                      Bradley International
   each item prior to the auction.                                                                         Hartford, CT
3. All persons seeking to register to bid must present a valid drivers license or              (Approximately 30 minutes from site)
   acceptable photo identification. In addition, auctioneer reserves the right to
   verify the validity of all cashier's checks or certified funds drawn from lending HOTELS
   institutions.                                                                                           Hampton Inn
4. Only cash, Cashier’s Check, Certified Check, Traveler’s Check or wire trans-                   Meriden, CT (203) 235-5154
   fer made payable to DoveBid-Greenwich will be accepted. A company check                                Residence Inn
   must be accompanied by a letter from your bank guaranteeing its payment in                     Meriden, CT (203) 634-7770
   full. A 25% deposit is required upon successful bid from all buyers. Balance
   and full payment is due prior to the removal of any merchandise.                         Sheraton, Bradley International Airport
5. Applicable sales tax will be added to the purchase price and the Buyer's                    Windsor Locks, CT (860) 627-5311
   Premium of all taxable auction items. Dealers who purchase for resale must
   file their resale permit numbers in order to avoid paying the area's sales tax.
   The resale certificate must be representative of the same industry as the items
                                                                                     A detailedlot listing and buyers guide will be
   that are purchased.
                                                                                     available on our websites on or before July 7th.
Additional Terms & Conditions will be posted at the sale.
                                                                                              AUCTION MANAGED AND CONDUCTED BY:
  10% Buyer’s Premium will apply to all items/lots sold at this auction.

  If you are unfortunately unable to attend this auction sale and wish to make an
  absentee bid, please call 203-488-6650 for further information and details.
                                                                                                         DOVEBID INC.
RIGGING                                                                                             1241 E. HILLSIDE BLVD.
  Various Riggers will be on-site on the day of the Auction. It is the buyers                       FOSTER CITY, CA 94404
  responsibility to coordinate all rigging needs for his/her purchases. All Riggers                  PHONE (800) 665-1042
  must have Insurance Certificates on file with the Auctioneer prior to removing                      FAX (650) 572-1502
  any machinery.                                                                                   WEBSITE:

  All of the information provided in this brochure is subject to deletions, errors,
  additions and changes without notice. Although information is gathered from
  sources thought to be reliable, DoveBid-Greenwich shall have no responsibil-
  ity whatsoever for any information provided to any attendee or buyer.
                                                                                                   DOVEBID - GREENWICH
REMOVAL                                                                                    896 MAIN STREET • BRANFORD, CT 06405
  There will be no removal during the Auction. All bills must be paid in full                      PHONE (203) 488-6650
  prior to any removal.                                                                              FAX (203) 488-4577

 Directions to Eastern Tool & Die
 From New York and New Haven Area
 Follow I-95 to I-91 North in New Haven. Follow 91 North to exit 17 (Rt. Directions from Hartford
   15 North – Berlin Turnpike). Follow signs for Berlin Turnpike North. Follow Berlin Turnpike South (Rt. 15 South) to the intersection of Pane
   Travel on Berlin Turnpike Route 15 North for approximately 9 miles      Road. The Olympia Diner will be on the corner. Take a right onto
   to the Intersection of Pane Road. The Olympia Diner will be on your     Pane Road. Eastern Tool & Die is 3/10 mile on the right.
   left. Take a left on Pane Road. Go 3/10 mile and Eastern Tool & Die
   is on the right. #156 Pane Road. Follow Auction signs.

                                            (2) Hartford Super Spacer
                                            Dividing Heads/Indexing Heads,
                                            8” Chucks. Tooling to Include:
                                            Assorted Swivel and Stationery
                                            Milling Machine Vises, Hardinge
                                            HC Collets, Bridgeport R8
                                            Collets, Numerous Carbide
                                            Cutting Inserts, Numerous Drill
                                            Chucks, Numerous Chuck Jaws
                                            and Cutting Tools for Bullard
                                            Turret Lathes, Numerous Bullard
                                            Tool Holders, Drills, End Mills,
                                            Taps and Reamers in Various
                                            Sizes, Rotary Tables, 1-2-3
                                            Blocks, Sine Bars, Angle Plates,
                                            Power Tools, Hand Tools, Quick                 Bridgeport 1-1/2 HP                  Bridgeport 1-1/2 HP
                                            Change Tooling, 40 & 50 Taper                 Vertical Milling Machine             Vertical Milling Machine
                                            Tool Holders, Lathe Swing Plates,       Toolroom
                                            Numerous 3-Jaw and 4-Jaw
                                            Chucks, Large Heavy Duty                Machinery
                                            Milling     Vises,     V-Blocks,        Black Diamond Drill
                                            Horizontal Milling Cutters                Point Resharpener,
                                                                                      Model BW-90, S/N
                                                                                      26214, 1/3 H.P.,
                                                                                      1/16-1/2” Capacity,
                                                                                      3,400 RPM
                                                                                    Walker Turner,
                                                                                      Model 1143-41
                                                                                      Vertical Drill Press,       Ford Custom F-350 Rack Body Truck
                                                                                      S/N 0000428, 1
                                                                                      H.P., Variable Speed
                                                                                    Greenard No. 4 Heavy Duty Arbor Press
          R                                                                         Hamilton Bench Model Sensitive Drilling Tapping Machine
       OVE0                                                                         United States Electrical Double End Buffing Jack
        30 S                   Partial View of Tooling
                                                                                    Sunnen, Model MA Bench Model Precision Honing Machine, S/N 6036
        LOT                                                                         Butterfly, Bench Model Die Filer
                                                                                    Lassy Hand Tapper
                                                                                    Carboloy Double End Carbide Drill Sharpener
                                                                                    Cold-Grind Carbide Bench Model Drill Sharpener
                                                                                    Delta Double End Drill Grinder
                                                                                    Baldor Double End Grinder
                                                                                    Hammond 14” Heavy Duty Double End Drill Sharpener/Grinder
                                                                                    Band Sander, 1” Vertical Continuous Belt Sander
                                                                                    Branford, Model 1900 Sand Blast Cabinet, S/N 216
                                                                                    Porter Cable, Model Type BG8, Vertical Continuous 8” Wet Dry Belt
                                                                                      Grinder, 12” x 30” Table, 5 H.P. Motor (See Photo)
                                                                                    Leland Gifford 4-Spindle Vertical Production Drill Press

                                                                                    Radial Arm Drill
                                                                                    Cincinnati Bickford Radial Arm Drill, S/N 2E-50, 12” Column, 5’Arm,
                                                                                      Ball Screws, Power Rise, 756 RPM Maximum Arm Shaft Speed, 28”
Tooling Cabinet & Partial View of Tooling      Partial View of Milling Vises          x 28” Bolster w/ 26” Rise (See Photo)

                                                                                    Plant Support
                                                                                    Aget Dust Collector, Model 520, S/N 6243
                                                                                    Aget Dust Collector
                                                                                    DeWalt Radial Arm Saw
                                                                                    Assorted Raw Material, Including Aluminum Tool Steel, Copper, Brass
                                                                                      in the Form of Bar Stock, Square Stock, Angle Stock, Round Stock and
                                                                                      Work in Progress Uncompleted (See Photo)
                                                                                    Plant Support to Include Numerous Workbenches, Pallet Racking, 2-Door
                                                                                      Metal Storage Cabinets, Shop Stools, Tooling and Parts Cabinets, Roll
                                                                                      Around Carts, Welding Screens, Hoists, Vacuum Cleaners, Cantilever
                                                                                      Racks for Raw Material, Hand Trucks, Banding and Strapping Carts,
                                                                                      Shipping Supplies
                                                                                    Deluxe System Heavy Duty Tooling Cabinet

                                                                                    Air Compressors
                                                                                    Ingersoll Rand 10 H. P. Horizontal Tank Air Compressor, Piston Type
 Partial View of Tooling & Accessories Partial View of Tooling and Cabinets
Material Handling
Assorted Die Lift Tables
Numerous CM Lodestar Electric and Manual
  Chain Falls and Hoists
Rolift Hydraulic Pallet Jack
Numerous Chain Falls/Hoists

48” x 72” Challenge Granite Surface Plate, 12”
  Thick w/ Metal Stand (See Photo)
24” x 36” Granite Surface Plate
36” x 48” Granite Surface Plate w/ Steel Stand                                                                Pratt & Whitney 36” Power Rotary Table
48” x 48” Steel Surface Place
36” x 72” Granite Surface Plate
Micro-vue, Model 500 HP 14” Bench Model
  Optical Comparator, S/N 21998 (See Photo)
Rockwell Clark, Model 3JR Hardness Tester
Numerous Inspection Gauges Including But
  Not Limited to: Starrett Digicheck, Height
  Gauges, Mititoyo 12” Heightmaster, Cadillac
  Height Gauges, Gauge Blocks, Outside and
  Inside Micrometers, Verniers, Dial Indicators,
  Pin Gauge Sets, Sine Bars, Micrometer Sets,
  V-Blocks, Sunnen Dial Bore Gauges, Parallel
  Bars, Plug Gauges, Snap Gauges, Ring
  Gauges, and Depth Gauges                             Pratt & Whitney 36” Vertical Rotary Table        Pratt & Whitney 24” Power Tilting Rotary Table
30” x 36” Steel Surface Plate

       Atlas Precision Bench Model Lathe                  Partial View of Inspection Gauges                       36” x 48” Granite Surface Plate

     Porter-Cable Heavy Duty          Black Diamond Drill Point Sharpener          Rockwell Hardness Tester              Micro-Vu Optical Comparator
      Wet-Dry Belt Grinder

           Blanchard Model No. 18,
          36” Rotary Surface Grinder

Horizontal Boring Mills
DeVlieg, Model 4K-72 Spiramatic 4”
  Horizontal Jig Mill/Boring Mill, S/N 9617,
  Complete w/ Anilam, 3-Axis Programmable
  Microprocessor Control and Readout
  System, 40” x 72” Table, Ball Screws, 10 –
  1,450 RPM, 50 Taper Spindle, 20” Spindle
  Travel, .0013 - .167 Feeds (See Photo)
                                                    Giddings & Lewis Model 340T, 4” Boring Mill               Bullard 60” Vertical Turret Lathe
Giddings & Lewis 4” Horizontal Table Type
  Boring Mill, Model 340T, S/N 6275, Ball         Lathes
  Screws, 2” Sub Spindle, 7-1/2 - 1,500 RPM       LeBlond Regal Engine Lathe, S/N 2D792, 17”
  Spindle Speeds for Main Spindle, 30” x 64”        x 54” Swing, 12” 3-Jaw Chuck, Threading, 1-
  Table Size w/ Tri-onics Model 50 2-Axis           1/2” Through Hole, 38 – 1,500 RPM Spindle
  Digital Readout w/ Scales, Vertical Arbor         Speeds, Removable Pan Bed (See Photo)
  support for Horizontal Milling w/ Bridgeport    LeBlond Regal Engine Lathe, S/N 3H868, 28”
  1 H.P. Vertical Milling Head Attachment, 60”      x 48” Threading, 2” Through Hole, 15” 3-
  Vertical Travel, Lubrication and Coolant          Jaw Chuck, 18 – 720 RPM Spindle Speeds,
  System (See Photo)                                Complete w/ Scan-O-Matic Hydraulic Tracer
Lucas Horizontal Boring Mill w/ Bridgeport 1        System (See Photo)
  H.P. Milling Head Attachment                    LeBlond Regal Toolroom Lathe, S/N C9474,
(2) DeVlieg 20” x 40” Precision                     14” Swing, 8” 3-Jaw Chuck, 1” Through
  Bolsters/Knees, S/N A-91803 (See Photo)           Hole Threading, Pan Bed
                                                  LeBlond Regal Toolroom Lathe, 15 x 42”, S/N
Vertical Turret Lathes                              4C646, 30 – 1,200 RPM Spindle Speeds,
Bullard 60” Vertical Turret Lathe, S/N 14933,       Threading, 1-1/2” Through Hole, Removable
  Side Cutting Head, 5-Position Turret, Anilam      Pan Bed, Coolant System (See Photo)
  Wizard 2-Axis Digital Readout, High             Atlas Bench Model Precision Lathe
  Column Lubrication System, 67-1/2” Max.
  Swing, 44 RPM, Fine Feeds (See Photo)           Rotary Surface Grinder
Bullard 50” Vertical Turret Lathe, S/N 22728,     Blanchard, Model 18, 36” Rotary Surface
  54” Swing, Anilam Wizard 2-Axis Digital           Grinder, S/N 3461, 36” Chuck, 36” Swing,
  Readout, Side Cutting Head, 5-Position            16” Segmented Grinding Wheel,-1/2” Lip on
  Turret, Complete w/ Tracer Attachment (See        Chuck, Electro-Magnetic Chuck Control,                    Bullard 50” Vertical Turret Lathe
  Photo)                                            Coolant System, Approximately 18”
Bullard 42” Vertical Turret Lathe, Side Cutting     Maximum Distance Between Grinding
  Head, High Column, 5-Position Turret              Wheel and Chuck (See Photo)
Bullard 36” Vertical Turret Lathe, Side Cutting
  Head, 5-Position Turret, S/N 23990, 200                                                                          2 of 4
  RPM, 38” Max. Swing, Fine Feeds
Bullard 36” Vertical Turret Lathe, Side Cutting
  Head, 5-Position Turret, S/N 18450

Surface Grinders
Reid Precision Hand Feed Precision Surface
  Grinder, Model 618H 6 x 18” Brown &
  Sharp Magnetic Chuck, 1 H.P. Spindle
  Motor, 3,600 RPM (See Photo)
Thompson, Model B Hydraulic Surface
  Grinder, S/N 2F672837, 8” x 24” Magnetic
  Chuck, 2 H.P. Spindle Motor, 3,450 RPM,
  Complete w/ Coolant System (See Photo)
Covel, 6” x 18” Hand Feed Precision Surface          Bridgeport CNC Vertical           Bridgeport Series J, 1 HP            Bridgeport Series J, 1 HP
  Grinder, Complete w/ Coolant System                    Milling Machine                Vertical Milling Machine             Vertical Milling Machine
                                       Rotary Tables                                        Vertical Milling Machines
                                       DeVlieg 40” x 50” Precision Air Lift Rotary Table    Millport CNC Retrofitted Vertical Milling
                                         (See Photo)                                          Machine, 3 H.P., 60 – 4,250 RPM Spindle Speeds
                                       Pratt & Whitney 24” Precision Power Tilting            w/ Anilam Crusader II Microprocessor CNC
                                         Rotary Table                                         Control System, Model 3KVHC, S/N 4978, 10”
                                       Pratt & Whitney 12” Rotary Table                       x 50” Table, Quick Change Tooling Spindle,
                                       Pratt & Whitney 24” Power Rotary Table, S/N            Power Draw Bar, Bijur 1-Shot Lubrication
                                         26986                                                System, Servo-Driven Table (See Photo)
                                       Pratt & Whitney 12” Horizontal Precision Rotary      Bridgeport Vertical CNC Retrofitted Vertical
                                         Table, S/N 2821341 (See Photo)                       Milling Machine, 1-1/2 H.P., 60 – 4,200 RPM
                                       Pratt & Whitney 24” Power Rotary Table, S/N            Spindle Speeds, Complete w/ Anilam Crusader
                                         285171                                               II Microprocessor CNC Control System w/
                                       Pratt & Whitney 36” Power Rotary Table, S/N            Crusader Program Saver, R8 Spindle, 9” x 42”
                                         28988, w/ J&P Control Systems, Model 315             Table, S/N 89730, 4” Column Riser, 1-Shot
                                         Single Axis Rotary Display Digital Readout           Lubrication System, Quick Change Tooling
                                       Pratt & Whitney 36” Vertical Rotary Table,             Spindle, Power Drawer Bar, Servo-Driven Table
                                         Complete w/ J & P Control Systems Single Axis        (See Photo)
                                         Programmable Digital Readout (See Photo)           Bridgeport Series J, 1-1/2 H.P. Trav-A-Dial
                                       Walten 16” Rotary Table                                Vertical Milling Machine, 9” x 42” Power Table,
      OKK Model MH-3V                  15” Rotary Table                                       Spindle Speeds 60 – 4,200 RPM, R8 Spindle Tri-
     Vertical Milling Machine                                                                 onics Model 50, 2-Axis Digital Readout w/
                                       Horizontal Milling Machines                            Scales, S/N 107356 (See Photo)
                                       Cincinnati       Universal      Wide       Knee      Bridgeport Series J, 1 H.P. Vertical Milling
                                         Horizontal/Vertical Milling Machine, Model No.       Machine, 9” x 36” Power Table, Spindle Speeds
                                         2, S/N 4J2P5E-6, 16 – 1,600 RPM Spindle              80 – 2,720 RPM, R8 Spindle, Spirit Anilam 2-
                                         Speeds, 16 x 58” Table, Arbor Supports, 50           Axis Digital Readout w/ Scales, S/N 97120
                                         Taper Spindle Lubrication System, Auto Cycle       Bridgeport Series J, 1 H.P. Vertical Milling
                                         Table, (See Photo)                                   Machine, 9” x 36” Table, Spindle Speeds 80 –
                                                                                              2,720 RPM, R8 Spindle, Anilam Spirit 2-Axis
                                       Vertical Jig Borers                                    Digital Readout, S/N 97117, 1-Shot Lubrication
                                       Atlantic, 7000 Series Vertical Jig Borer, Complete     w/ Bridgeport Shaper Head, 70 – 420 Strokes per
                                         w/ Anilam Wizard 2-Axis Digital Readout, Ball        minute, S/N E-11867
                                         Roll Quill Spindle, w/ Atlantic Super Precision    Bridgeport Series J, 1 H.P. Vertical Milling
                                         Optical Rotary Table, 24” x 50” w/ 28” Rotary        Machine, 9” x 42” Table, S/N 107347, R8
                                         Table, J & P Roto-King Programmable Table            Spindle, Spindle Speeds 80 – 2,720 RPM,
                                         Control, 30 – 1,500 RPM Spindle Speeds,              Anilam Spirit 2-Axis Digital Readout w/ Scales
                                         Reliance Motor Drive w/ Bronco Variable DC         Bridgeport Series J Vertical Milling Machine, 1
                                         Drive Control, Lubrication System, S/N 7000-         H.P., Spindle Speeds 80 – 2,720 RPM, 9” x 42”
                                         121-65 (See Photo)                                   Table, S/N 107337, R8 Spindle, Anilam Spirit 2-
                                       Atlantic 7000 Series Vertical Jig Borer, Complete      Axis Digital Readout w/ Scales, 4” Riser
                                         w/ Heidenhainpos-e-Touch II 2-Axis Digital         Bridgeport Series J, Trav-A-Dial, 1-1/2 H. P.
     Cincinnati Model No. 2              Readout w/ Scales, 24” x 50” Table, 30 – 1,500       Vertical Milling Machine, 9” x 42” Table, 60 –
    Universal Milling Machine            RPM Spindle Speeds, Ball Roll Quill Spindle,         4,200 RPM Spindle Speeds, R8 Spindle, S/N
                                         Century E-Plus AC Adjustable Motor Drive             108729 Anilam Spirit, 2-Axis Digital Readout
                                         Speed Control, 6” Column Riser, J & P Control        w/ Scales
                                         Systems, Model 315 Rotary Display, S/N 7000-       Cincinnati, Model No. 4 Vertical Milling Machine,
                                         133-67 (See Photo)                                   S/N 2A4V1K-79, 18 – 450 RPM Spindle
                                       Atlantic, Model 4000 Series Vertical Jig Borer, 90     Speeds, 16” x 78” Table, Power Feed on Head
                                         – 2,350 RPM Spindle Speeds, S/N4000-80-61,           (See Photo)
                                         12” x 18” Table (See Photo)                        OKK, Model MH-3V Vertical Milling Machine,
                                       Pratt & Whitney, Model 2A Vertical Jig Borer,          S/N 1162, 14” x 64” T-Slotted Table, 48 – 1,600
                                         S/N 650R, Anilam Wizard 2-Axis Digital               RPM Spindle Speeds, Lubrication System, 50
                                         Readout and Scales, 16” x 32” Table, 37 – 1,800      Taper Spindle, Auto Cycle Table, Power Feed on
                                         Spindle Speeds, 8” Column Riser, Lubrication         Head, (See Photo)
                                         System (See Photo)

Atlantic 7000 Series,
  Vertical Jig Borer            Atlantic Super Precision
                                  Optical Rotary Table                                                                               1 of 2
                                                                        LeBlond Regal 15” x 42” Lathe
                                                                                                           Atlantic Jig Borer Machinists Cabinet
                                                                    4                                               w/ Jig Borer Tooling
Welding & Fabrication                     Cylindrical Grinder                                       Saws
Ransome, Model 10-P 38” Welding           Grisetti, Model Elite, Model M1000, 12 x 30”              Marvel, Series 8, Mark I Vertical Metal Cutting
  Positioner, S/N 144392, 1,000 lb.        Universal Cylindrical Grinder, S/N 536, ID Drop            Band Saw, 17” Throat, Coolant System, S/N
  Table Capacity,-1/2 - 2 RPM Table        Down Spindle (See Photo)                                   821164, Manual Clamping Table (See Photo)
  Speed (See Photo)                                                                                 Grob Vertical Metal Cutting Band Saw, Model
Miller, Model CP-300E DC Welding                                                                      NS36, S/N 1431, 36” Throat, Grinding and
  Machine, S/N HD725505, w/                                                                           Buckweld Blade Attachment (See Photo)
  Cobramatic, Model MK-3A Wire                                                                      Zip-Cut Abrasive Cut Off Saw, 1 H.P., 3,450 RPM
  Feeder and Coolant System
Miller, Syncrowave 300 AC/DC Gas
  Tungsten Arc Welder, S/N JA446560
  (See Photo)
Miller, Model 340A-BP AC/DC Inert
  Gas Welder, S/N M264544
Miller, Model SRAC-3P Welder, S/N
Whitney, No. 38 Manual Alligator
Numerous Sets of Acetylene Torches
Victor, Plasma Torch Track Cutter,
  Model VC120
Heath Ultra-Grab, Model GC46 Plate
  Plasma Cutting System
Pexto 36” Manual Initial Plate Bending
  Rolls, Model 381D, 22 Gauge
  Capacity                                Cincinnati Bickford Radial Arm Drill      Ransome Welding Positioner      Marvel Series 8 Vertical Band Saw
Pexto 36” Manual Shear

       Atlantic 4000 Series              LeBlond Regal 17” x 54” Lathe           Grisetti Model M-1000 12” x 30”         Reid 6” x 18” Precision
        Vertical Jig Borer                                                        Universal Cylindrical Grinder        Hand Feed Surface Grinder

        Miller Syncrowave                 Miller Welder w/ Cobramatic                  Grob Vertical Metal             Thompson Model B 8” x 24”
        Model 300 Welder                          Attachment                           Cutting Band Saw                 Hydraulic Surface Grinder
                                                                                                                                                         Members of
                                                                                                                                                                                                                 PRESORTED FIRST
                                                                                                                                                                                                                   CLASS MAIL
                                                                                                                                                                                                                   U.S. POSTAGE

                                                                                                                                                                                                                     Permit No. 260
896 MAIN STREET • BRANFORD, CT 06405                                                                                                                                                                                 Bridgeport, CT

PUBLIC AUCTION                                                                                                                                                                            FI RST CLASS M AI L
                                                                                                                                                                                                     RETURN SERVICE REQUESTED

                                                                                                                                   156 Pane Road
                                                                                                                                   Newington, CT

Tuesday, July 11, 2000 - 10:00 A.M.

Monday, July 10, 2000 - 9:00 A.M. - 4:00 P.M.


                                                                                                                                       PRECISION MACHINING FACILITY
                                                              Inspection: Monday, July 10, 2000 - 9:00 A.M. - 4:00 P.M.
              SALE DATE:Tuesday, July 11, 2000 - 10:00 A.M.

                                                                                                                                                                                                   156 Pane Road
                                                                                                                                    EASTERN TOOL & DIE, INC.                                       Newington, CT
                                                                                                                                                                      1 of 2

                                                                                                                          Millport CNC Vertical Milling Machine   Atlantic 7000 Series, Vertical Jig Borer   LeBlond Regal 28” x 48” Engine Lathe

Shared By:
Tags: ETD-HP, (Page