Bathroom Radiators

Document Sample
Bathroom Radiators Powered By Docstoc
					Bathroom Radiators




DO 50
Tubular steel radiators for hot water systems
up to 116 psi and 230°F.

Main features
– Manufactured to form two vertical tubular                        – Accessory kit.                                               brackets.
  collectors made of iron of Ø 38 x 1,5 mm                           • Set of 4 brackets finished in white RAL 9010.            – Two 1/2" tappings (bottom) and another on
  and the heating surface is made up of flat                         • Allen key for fixing the brackets.                         the top side of 1/8" for the air vent.
  iron tubes of 50 x 10 x 1,5 mm which                               • One 1/2" plug, chrome-plated, with O-ring.               – The rest of the characteristics are the same
  connect both collectors.                                            • 1/8" air vent.                                            as the CL 50 model.
– Three basic heights: 672, 1120 and 1400mm.                         • Rawlplugs and woodscrews for fixing the



Dimensions and Technical Data (1 Kcal/h = 3.96 Btu)
                       Total      Total       widht    Water Appro.                 Heat output in Kcal/h Eponent "n" of
       Models         height      width     between capacity weight                                        the characteristic
                       mm          mm      uprights mm   I     kg                      (1)          (2)         curve
 DO 50-700              672       500          442     2,61    7,2                    340           270          1,159
 DO 50-1200           1.120       500          442     4,79   13,8                    570           479         1,190
 DO 50-1400           1.400       500          442     5,82   16,6                    668           561          1,202
(1) = Heat output in Kcal/h to UNE 9-015-86 for a ∆t= 60 °C (For your information)
(2) = Heat output in Kcal/h to UNE EN-442 for a ∆t= 50 °C                                                                       1/2" connection tappings
∆t = (mean radiator T. - room T.) in °C
"n" Eponent of the characteristic curve meets UNE EN-442




Delivery presentation                                                                                1/2" connection tappings
Delivered with all the accessories necessary
for installation in the hydraulic version.

Optional supply
For installation of the electric version or
combined, please note that the electric heater
element, 1/8" safety valve, and the 1/2" equal
Tee are delivered separately.
Chrome-plated valves are available (Valve
and Lock-shield valve). See: "Radiator
Valves".

Hydraulic pressure
We recommend that the radiators are tested
after their installation at 1,3 times the working
pressure.
Bathroom Radiators
Heater element
                                 Type of heater element   Power
                                  RE 450                   450
                                  RE 600                   600
                                  RE 900                   900




The support system
CL 50                DO 50




EU 50                HO 45 / CL 50 CR
Bathroom Radiators




HO 45
Tubular steel radiators for hot water systems up to 116 psi and 230°F.


Main features
- Manufactured to form two vertical                                    • 1/2" air vent                                   (hot water), electric-combined (with heater
  rectangular collectors made of steel of                              • Rawlplugs and woodscrews for fixing the         element).
  40 x 30 x 1.5mm and the heating surface is                           brackets                                        - Supplied painted with a white epoxy
  made up of horizontal steel tubes Ø25 x                          -   Two 1/2" tappings                                 (RAL 9010) finishing coat.
  1.5mm which connect both collectors.                             -   Can be connected to a two-pipe or single-       - Individually packed with corner pieces and
- Two basic heights 770 and 1170mm.                                    pipe system. (Use the MONOTUBO                    cardboard side protectors, and shrink-
- Accessory kit.                                                       Vertical Valve with thermostatic option)          wrapped. Inside you will find a box with the
  • Set of 3 brackets finished in White RAL 9010                   -   Tested to a pressure of 18 bar which              accessory kit.
  • Allen key for fixing the brackets.                                 guarantees their water-tightness.
  • One 1/2" plug, chrome-plated, with O-ring                      -   Can be installed in two versions: hydraulic

Dimensions and Technical Data (1 Kcal/h = 3.96 Btu)
                                              Width                                   Heat output     Eponent "n"
                       Total      Total                             Appro.
                                             between      Water                        in Kcal/h         of the
       Models         height      width                             weight
                                             uprights    capacity I                                   characteristic
                        mm         mm                                 kg
                                               mm                                    (1)       (2)       curve
 HO 45-800               770      450          420           4,7         7,5         390      333,0       1,222
 HO 45-1200            1.170      450          420           7,1        11,0         550      465,5       1,245
(1) = Heat output in Kcal/h to UNE 9-015-86 for a ∆t= 60 °C (For your information)
(2) = Heat output in Kcal/h to UNE EN-442 for a ∆t= 50 °C
∆t = (mean radiator T. - room T.) in °C
"n" Eponent of the characteristic curve meets UNE EN-442



Delivery
Delivered with all the accessories necessary
for installing the hydraulic version.

Optional supply
For installation of the electric version or
combined, please note that the electric
heater element, 1/8" safety valve, and the
1/2" equal Tee are delivered separately.
Chrome-plated valves are available (Valve
and Lock-shield valve). See: "Radiator
Valves".

Hydraulic pressure
It is recommend that radiators be tested after
installation to a pressure 1,3 times the working
pressure.
Bathroom Radiators
Heater element
                                 Type of heater element   Power
                                  RE 450                   450
                                  RE 600                   600
                                  RE 900                   900




The support system
CL 50                DO 50




EU 50                HO 45 / CL 50 CR
Bathroom radiators




CL 50 and CL50 CR
Tubular steel radiators for hot water systems
up to 8 bar and 110 °C.

Main features
- Manufactured to form two vertical                                     • Rawlplugs and woodscrews for fixing the               - Delivered painted with epoxy paint and
  rectangular collectors made of steel of                                 brackets.                                                finished with white RAL 9010.
  40 x 30 x 1,5 mm and the heating surface is                        - Two 1/2" tappings.                                       - Individually packed with corner pieces and
  made up of horizontal steel tubes of                               - Can be connected to a two-pipe or single-                   cardboard side protectors and shrink-
  Ø 25 x 1.5 mm linking the two collectors.                             pipe system. (Use the thermostatic-option                  wrapped. Inside you will find a box with the
- Three basic heights: 760, 1190 and 1800 mm.                           vertical Monotubo     valve).                              accessory kit.
- Accessory kit.                                                     - Tested to a pressure of 18 bar which
  • Set of 3 brackets finished in white RAL 9010.                       guarantees their water-tightness.
  • Allen key for fixing the brackets.                               - Can be installed in two versions: hydraulic
  • One 1/2" plug, chrime-plated, with O-ring.                          (hot water), mixed-electric (with heating
  • 1/8" air vent.                                                      element).
Dimensions and Technical Data
                                             Width                                           Heat output
                      Total    Total                       Wall              Approx.                              Exponent "n" of
                                            between                Water
        Models       height  width                      clearance            weight                               the characteristic
                                            uprights              capacity I
                     A (mm) B (mm)                       D (mm)                kg         Kcal/h         W             curve
                                            C (mm)
  CL 50/800             760       500         450             94,5         5,2     8,0     323          376             1,239
  CL 50/1200          1.190       500         450             94,5         7,9    12,3     512          596             1,248
  CL 50/1800          1.800       500         450             94,5        12,0    18,7     780          907             1,259
  CL 50/800 CR          800       500         450             85           5,2     8,0     323 (*)      376 (*)         1,239
  CL 50/1200 CR       1.195       500         450             85           7,9    12,3     512 (*)      596 (*)         1,248
  CL 50/1800 CR       1.780       500         450             85          12,0    18,7     780 (*)      907 (*)         1,259
Heat output in Kcal/h and W meets UNE EN-442 for ∆t = 50 °C
∆t = (mean radiator T -room T) in °C
                                                                                                     1/2" connection tappings
"n" Exponent of the characteristic curve meets UNE EN-442
(*) = Official approval pending.


Delivery presentation
Delivered with all the accessories necessary
for installation in the hydraulic version.
For installation in the electric version or
combined, please note that the electric
heater element, 1/8" safety valve and the
1/2" equal Tee are delivered separately.
Hydraulic pressure
We recommend that the radiators are tested
after their installation at 1,3 times the working
pressure.


                                                                                                                                                                            113
Bathroom radiators
Heater element
                                 Type of heater element   Power
                                  RE 450                  450
                                  RE 600                  600
                                  RE 900                  900




The support system
CL 50                DO 50




EU 50                HO 45 / CL 50 CR




128

				
DOCUMENT INFO