Ad d on i cs JB O D USB 2.0 Ad ap ter
Thank you for purchasing the Addonics JBOD USB2.0 adapter, model AD4IDEU2. With this adapter, you can connect up to four
3.5” IDE hard drives via a single high speed USB2.0 connection. The four drives can be set to appear to the computer as one or
two large hard drives (JBOD setting to combine the storage capacity of each individual hard drive) or as 4 individual drives.
Connects up to 4 IDE hard drives JBOD support (the 4 drives can be combined as 1 large drive
Connect up to 4 SATA/SATA II hard drive using the or as 2 hard drives)
optional Addonics SATA-IDE converter. Support large hard drives over 137 GB
Connect all drives via 1 USB connection Fits Addonics Storage Tower or multi-bay SCSI drive
Support USB 2.0 and 1.1 enclosures with SCSI-I centronic connector
Compatible with Windows 2000, XP and 2003
Bridge Board Parts Board Jumper Settings
Bridge Board Jumper
o IDE drives must be set to one master and one slave setting, if two drives will be connected.
o Connect the MASTER drive at the end of the cable and the SLAVE drive at the middle.
Bridge Board Jumper Setting
MODE# Mode Description
MD2 2 HDD Mode ON: Combines P1 (two disk drives as one large disk drive) and
combines P3 (two disk drives as another entire disk drive
MD1 1 HDD Mode ON: Combines 4 disk drives as one large disk drive
MD0 4 HDD Mode ON: Separate 4 hard drives
2466 Kruse Drive
San Jose CA, 95131