Docstoc
EXCLUSIVE OFFER FOR DOCSTOC USERS
Try the all-new QuickBooks Online for FREE.  No credit card required.

BANK OF INDIA

Document Sample
BANK OF INDIA Powered By Docstoc
					                                BANK OF INDIA
                    FURNISHING / ELECTRICAL / DATA CABLING WORK

                     OF BANK OF INDIA AT BHIWANI (Haryana) Branch




                                        A    AKAAR
                                              S
                                             S OCIATES
                             S.C.O-283, SECTOR-35 D,
                             CHANDIGARH
                             PHONE : 0172-5067954 (o)
                             MOBILE: 09417495655



                                   TENDER DOCUMENT
                                  PART –B (Financial Bid)

Consisting of :              Tender Document
                                1. BOQ

NOTE: All conditions, rules, instructions specifications and any other information in part
A is for the purpose of governing Part B. Both Part A and Part B along with all
Drawing constitute the full and complete Tender Document
.
                                                             Client:
                                                             Bank of India
                                                             Zonal Office
                                                             S.C.O : 181-182,
                                                             Sec-17 C,
                                                             Chandigarh. -160017




                                                  1
                RECOMMENDED MAKE TO BE USED FOR THE FURNISHING OF
                     BANK OF INDIA BRANCH AT Bhiwani (HARYANA)


1.   Plywood (M R Grade)            :   Sarda Plywood Duro Ply / Green Ply Ecotech/
                                        URO / Century Ply Wood Sainik

2.   Laminates                      :   Greenlam, Silicon, Century Mica,Euro.(Shed as mentioned
                                        in the working drawing and bill of quantities).

3.   Lipping & Moulding             :   Teak Wood.

4.   Adhesive                       :   Fevicol SH.

5.   Locks (Multi purpose)          :   Godrej.

6.   Night Latch                    :   Godrej.

7.   Glass                          :   Modi / Asahi / Saint Gobain.

8.   Aluminium                      :   Jindal.

9.   Aluminium Cladding             :   Eurobond / Altobond / Alukbond.

10. Door Closer                     :   Garnish.(Heavy Duty) / Godrej.

11. Paint                           :   Berger / ICI Dulux./ Asian Paints

12. Wood Preservative               :   Bison by British Paints / Termiseal by ICI.

13. Wood                            :   Well Season Kapoor / Gumar / Badam.

14. Drawer Channel                  :   Telescopic.

15. Screw                           :   Nettlefold

16. Key Board Drawer                :   EBCO.

17. Telescopic CPU Stand /Trolley   :   EBCO.

18. Cable Organiser                 :   EBCO.

19. Floor Tiles                     :   Ceramic Tiles (400 x 400) Johnson / Orient / Somani.

20. Cement                          :   ACC / Lafarz / Birla Plus.

21. Rubber foam                     :   Dunlop

22. Polyurethan foam                :   Dunlop

23. Texture paint                   :   Spectrum / Heritage

24. MCB                             :   Indo Asian / Havell.s / L & T / Clipsal / Schinder.

25. Change over switch              :   L&T

26. Modular Switch                  :   Anchor Roma / MK / NorthWest

27. Wires / cables                  :   Anchor/ Finolex / Polycab

28. Ceiling fans                    :   Bajaj / Khaitan.

29. Exhaust fans                    :   Bajaj / Khaitan.

30. Wall mounted fan                :   Bajaj / Khaitan.
                                              2
    31. Ordinary tube light ( Single )       :        Philips / Wipro (model specified in BOQ)

    32. Tube light fixtures ( Double )       :        Philips / Wipro (model specified in BOQ.)

    33. 3X36 w recessed fixture              :        Philips / Wipro (model specified in BOQ).

    34. 12v, 50w halogens                    :        Philips / Wipro (model specified in BOQ).

    35. MCCB                                 :        Indo Asian / Havell / L & T / Clipsal / Schinder.

    36. ELCB                                 :        Indo Asian / Havell / L & T / Clipsal / Schinder.

    37. Telephone wire                       :        Anchor / MK / NorthWest

    38. Main panel                           :        Anchor

    39. Isolator                             :        Havell’s

    40. LAN Cable (Cat 5)                    :        D-Link


    41. I/O Switch                           :        D-Link




All other Materials shall be best quality heavy section mentioned in the drawing as well as in bill of quantities and also
         approved by Bank / Consultant.




                                                            3
             DETAILED SPECIFICATION AND BOQ FOR INTERIOR FURNISHING OF
                     BANK OF INDIA BRANCH AT Bhiwani (HARYANA)

                                                                                                   Rate     Amount
Sl. No.                            Description of Item                                  Qty.
                                                                                                  (in Rs)   (in Rs.)
  A       FURNISHING WORKS
   1.     Front Office Counter :                                                     25 R.FT.
          Providing and fixing in position one Front Office Counter 2’-6” wide
          as per Drawing No.1, (1-A), 1-B, 1-C, 1-D) comprising of the
          following complete in all respects :-
          i) Working top made with 25mm thick Plywood finished with 1mm
          thick laminate. Outside edge of the working top shall be provided
          with 1 ¼ ” x 1” Teak Wood moulding finished with melamine
          polish. Inside edge will be provided with ½ ” x 1” T.W. beading
          patti with melamine finish.
          ii) Vertical facia (Apron) made with 18mm thick plywood finished
          with 1mm thick laminate with 1mm thick groove at the joint of
          laminates of two different shades.
          iii) Vertical drop (horizontal band) shall be provided on the facia
          below the working top made with 18mm thick plywood finished
          with 1mm thick laminate with provision for concealed light, 1 mm
          thick groove shall be provided at the joint of two different shades of
          laminate.
          iv) Glazed partition above working top to be provided with 12mm
          thick clear glass cut to the standard shape fixed to partition as per
          fixing details and to boxing with concealed S. S. finished ‘D’
          brackets as shown in the drawing. The exposed edges of the glass
          shall be finished in mirror polish.
          v) 3’-10” High Boxing (10” x 10”) made with 18mm thick plywood
          finished with 1mm thick laminate including providing and fixing
          6mm thick square frosted glass at a height 3’-2” above finished floor
          level.
          vi) 1’-9” high Boxing (5” x 5”) made with 12mm thick plywood
          finished with 1mm thick laminate.
          vii) Vertical supports made with 18mm thick plywood finished with
          white enamel paint.
          viii) Telescopic CPU Stand / readymade Keyboard tray shall be
          provided of approved model and make.
          ix) Footrest made with Wooden member of size                4” x 1 ½ ”
          finished with French polish.
          x) Drawer units as per drawing shall be provided with multipurpose
          Godrej locks in each drawer. Facia of drawer unit shall be finished
          with 1mm thick laminate and all other sides shall be finished with
          white enamel paint. The drawers will be provided with handles
          (Stainless Steel finish) and channels. xi) Boxing as per drawing
          made with 12mm thick plywood finished with Synthetic enamel
          paint shall be provided below the table top for electrical conducting
          and at the bottom for the LAN cable / Telephone wire conducting.
          The item to include all necessary hardware and fittings in Stainless
          Steel finish, lipping to all edges and making provision only for
          electrical fitting behind the front. Vertical drop and also in the 10” x
          10” boxing as shown in the drawing. Necessary beadings with
          melamine polish for fixing the glass are to be provided.
          xi) Boxing as per drawing made with 12mm thick plywood finished
          with Synthetic enamel paint shall be provided below the table top for
          electrical conducting and at the bottom for the LAN cable /
          Telephone wire conducting. The item to include all necessary
          hardware and fittings in Stainless Steel finish, lipping to all edges
          and making provision only for electrical fitting behind the front.
          Vertical drop and also in the 10” x 10” boxing as shown in the
          drawing. Necessary beadings with melamine polish for fixing the
          glass are to be provided.

    2.    Cash Counters                                                               11. R.FT.
          Providing and fixing in position Cash Counter 2’-9” wide as per
          Drawing No. (2-A, 2-B, 2-C, 2-D, 2-E, 2-F) comprising of the
          following :
          i) Working top made with 25mm thick plywood finished with 1mm
          thick laminate. Outside edge of the working top shall be provided
          with 1¼ ” x 1”. Teak Wood moulding finished with melamine
          polish. Inside edge will be provided with ½ ” x 1”. T.W. beading
                                                                   4
     patti with melamine polish.
     ii) Vertical facia (Apron) made with 18mm thick plywood finished
     with 1mm thick laminate with 1mm thick groove at the joint of
     laminates of two different shades.
     iii) Vertical drop (horizontal band) shall be provided on the facia
     below the working top made with 18mm thick plywood finished with
     1mm thick laminate with provision for concealed light, 1mm thick
     groove shall be provided at the joint of two different shades of
     laminate.
     iv) Glazed partition of 1’-4” height above working top provided
     with 12mm thick toughened and frosted glass besides non-
     transparent film from inside fixed to partition as per fixing details
     and to boxing with concealed S. S. finished ‘D’ brackets as shown in
     the drawing. The exposed edges of the glass shall be finished in
     mirror polish.
     v) Transaction top shall be provided with 12mm thick toughened
     glass (partly glazed partly frosted) fixed horizontally with concealed
     Stainless Steel ‘D’ bracket. Both exposed edges (inside and outside)
     shall be moulded and finished in mirror polish.
     vi) Glazed partition having height 1’-0” above the transaction top (in
     facia) shall be provided with 12mm thick glass (clear) with cut out of
     8” x 4” as per drawing. The edges of cut out and the top
     edge of glass are to be mirror polished and to be fixed to partition as
     per fixing details and to boxing with concealed S. S. finished ‘D’
     brackets as shown
      in glass (Clear) above the slit to be fixed to partition as per fixing
     details and to boxing with concealed S. S. finished ‘D’ brackets as
     shown in the drawing. The exposed edges shall be finished in mirror
     polish.
     viii) 7’–7” high Boxing (10” x 10”) made with 18mm thick plywood
     as per drawing with 1’-6” horizontal extension at the top including
     providing and fixing 6 mm thick square frosted glass at a height of
     5’–11” above Finished Floor level.
     ix) 1’–9” high boxing (5”x5”) made with 12mm thick plywood
     finished with 1mm thick laminate are to be provided.
     x) Telescopic CPU Stand / readymade Keyboard tray shall be
     provided of approved model and make.
     xi) Footrest made with wooden member of size                4” x 1 ½ ”
     finished with French polish.
     xii)    Drawer units as per drawing shall be provided with
     multipurpose Godrej locks in each drawer. Facia of drawer unit
     shall be finished with 1mm thick laminate and all other sides shall be
     finished with white enamel paint. The drawers will be provided with
     handles (Stainless Steel finish) and channels as per approval of the
     Project Consultant / Bank.
     xiii) Boxing as per drawing made with 12mm thick plywood
     finished with Synthetic enamel paint shall be provided below the
     table top for electrical conducting and at the bottom for the LAN
     cable / Telephone wire conducting.
     The item to include all necessary hardware and fittings in Stainless
     Steel finish, lipping to all edges and making provision only for
     electrical fitting behind the front. Vertical drop and also in the 10” x
     10” boxing as shown in the drawing. Necessary beadings with
     melamine polish for fixing the glass are to be provided

3.   Partly Glazed Partition for Cash Cabins . Providing and fixing in          300 Sq.Ft.
     position 7’ – 7” high partly glazed partition for Cash Cabins as per
     Drawing Nos. (2-A, 2-B, 2-C, 2-D & 2-E) including door Drawing
     No. (12) in frame work at 2’ x 2’ grid (horizontally and vertically)
     comprising of 2” x      1 ½ ” wooden Section and / or as per frame
     work shown in the drawings with 6mm plywood on both sides
     finished with 1mm thick laminates of approved shade and colour as
     shown in drawings. Item to include 8 mm thick glass with etching
     and frosting as per design. Necessary cutouts are to be provided in
     the glass and edges of the glass cutouts are to be finished in mirror
     polish. All exposed wooden. surfaces to be finished in melamine
     polish of matching laminate colour as directed.

4.
5.   Partly Glazed full height Partition                                        250Sq.ft.
     Providing and fixing partly glazed full Height Partition work as
     shown in the Drawing Nos. (3) & (4) including 2 nos. door shutters

                                                              5
     as shown in the Drawing no. (13) & 1 in frame work at 2’ x 2’ grid
     (horizontally and vertically) comprising of 2” x 1 ½ ” wooden
     Section and / or as per frame work shown in the drawings with 6mm
     plywood on both sides finished with 1mm thick laminates of
     approved shade and colour as shown in drawings.
     Item to include 8 mm thick glass with etching and frosting as per
     design and 2” x 2” wooden. member for door sides and glass sides
     and T.W. door frame to take 8 mm thick glass with etching and
     frosting.
     All exposed wooden surfaces to be finished in melamine polish of
     matching laminate colour as directed including all necessary
     Stainless Steel finish fittings / hardware, door closers, Godrej locks
     and wood preservative paint etc. as per list of approved material and
     as approved by the Project Consultant / Bank complete in all
     respects.

6.   Low Height Partition                                                     150Sq.ft.
     Providing and fixing in position 4’–0” high partly glazed low height
     partition with 3 Nos. gate (2.5” thick) in frame work with wooden.
     vertical members at 2’ c/c and 3 horizontal members at equal
     distance comprising of 2” x 1 ½ ” wooden. Section with 6 mm
     plywood on both sides finished with 1mm thick laminates of
     approved make and shade as shown in Drawing No. (14) or (3). Item
     to include 12mm thick frosted glass to be fixed as shown in
     Drawing. The exposed edges of the glass to be finished in mirror
     polish. wooden runner should be melamine polished in matching
     colour of laminate etc. complete in all respects.

7.   Solid full height Partition                                              200Sq.ft.
     Providing and fixing Full Height solid Partition work as shown in the
     Drawing Nos. (3) & (4) including 2 nos. door shutters as shown in
      the Drawing no. (13) & 1 in frame work at 2’ x 2’ grid (horizontally
     and vertically) comprising of 2” x 1 ½ ” wooden Section and / or as
     per frame work shown in the drawings with 6mm plywood on both
     sides finished with 1mm thick laminates of approved shade and
     colour as shown in drawings.
     All exposed wooden surfaces to be finished in melamine polish of
     matching laminate colour as directed including all necessary
     Stainless Steel finish fittings / hardware, door closers, Godrej locks
     and wood preservative paint etc. as per list of approved material and
     as approved by the Project Consultant / Bank complete in all
     respects.

8.   Manager’s Table                                                          1.No.
     Providing and fixing in position Manager’s Table of size 6’-
     0” x 2’-6” as per Drawing No. (6) by using 25mm thick
     plywood for top and 18mm thick plywood for all other
     horizontal and vertical members. Telescopic CPU Stand /
     readymade Keyboard tray shall be provided of approved
     model and make. Footrest made with T.W. member of size 4”
     x 1 ½ “ finished with French polish. All exposed plywood
     surfaces to be finished with 1mm thick laminate of approved
     make & shade, and all exposed edges of table top & ply
     verticals to have 1” x ¼ “ T.W. lipping. cts.
     Side Credenza as per drawing shall be provided. Facia of
     Side Storage shall be finished with      1 mm thick laminates
     as shown in the drawing and all other sides shall be finished
     with white enamel paint. The Side Storage shall be provided
     with handles (Stainless Steel finish) and channels as per
     approval of the Project Consultant / Bank. All exposed
     plywood surfaces to be finished with 1 mm thick laminate of
     approved make & shade, and all exposed edges of table top &
     ply verticals to have 1” x ¼“ T.W. lipping. All exposed T.W.
     sections to be melamined and internal surfaces to have white
     enamel paint as directed. Item to include plywood boxing, all
     necessary hardware and fittings in Stainless Steel finish,
     lipping to all edges etc. complete in all respects



                                                            6
9.    Officer’s Table/Staff Table                                               6.Nos.
      Providing and fixing in position of Officer’s Table of size 4’-6” x 2’-
      3” as per Drawing No. (5) by using 25mm thick plywood for top and
      18mm thick plywood for all other horizontal and vertical members.
      Telescopic CPU Stand / readymade Keyboard tray shall be provided
      of approved model and make. Footrest made with T.W. member of
      size 4” x 1 ½ “ finished with
      French polish All exposed plywood surfaces to be finished with 1
      mm thick laminate of approved make & shade, and all exposed
      edges
      of table top & ply verticals to have 1” x ¼ “T.W. lipping. All
      exposed T.W. sections to be
      melamined polish and internal surfaces to have white enamel paint as
      directed. Item to include plywood boxing, all necessary hardware
      and fittings in Stainless Steel finish, lipping to all edges etc.
      complete in all respect.
      Side Credenza as per drawing shall be provided. Facia of
      Side Storage shall be finished with        1 mm thick laminates
      as shown in the drawing and all other sides shall be finished
      with white enamel paint. The Side Storage shall be provided
      with handles (Stainless Steel finish) and channels as per
      approval of the Project Consultant / Bank. All exposed
      plywood surfaces to be finished with 1 mm thick laminate of
      approved make & shade, and all exposed edges of table top &
      ply verticals to have 1” x ¼“ T.W. lipping. All exposed T.W.
      sections to be melamined and internal surfaces to have white
      enamel paint as directed. Item to include plywood boxing, all
      necessary hardware and fittings in Stainless Steel finish,
      lipping to all edges etc. complete in all respects

10.    MAIN ENTRANCE DOOR (GLAZING)                                                 81sq. ft.
       Providing main entrance door, 4’-6” wide, alongwith window,
       including 6’’x2.5” teakwood frame sections. Fixed etched
       glazing,8mm thick to be provided in windows. Door to have 7’’x2’’
       top rail and 9’’x2’’ bottom rails in teakwood. Door is to be provided
       with 12mm thick glass with etching as per design, complete with
       16” high stainless steel door handle, teak wood beading, spirit
       polishing, etc.the work includes heavy duty floor spring fixed at the
       floor

      OVER HEAD STORAGE:-                                                         40 R. ft.
11. Providing storage of size 15” x 18” (WXH) of ¾” comm.. board with
    1.0mm thick horizontal and vertical laminate having one shelf in
    center. Cedar wood lipping is provided at edge. Open able shutter with
    clip hinges ( etching colour ), ball catchers, multi purpose locks are to
    be provided. All works to be done complete in all respects. The
    storage unit is properly fixed to wall as per drawing / design at + 5’-9”
    . concealed tube lights ( 3 Nos. ) to be provided along with electrical
    wires and connections as per drawing ( Note : Electrical fittings given
    separately in electrical part

12.   LOW STORAGE UNIT                                                              40 R. ft.
      Providing storage unit of size 18”’x2’-6” (W x H) of ¾” thick
      commercial board with 1.5mm thick horizontal laminate and 1.0mm
      thick vertical laminate having one shelf in center. The storage unit
      will have all necessary hardware, decorative jalli pattern laminate
      band and teakwood/ partal wood beading / moulding. Recessed
      skirting (3/4”) finished with 1.0mm thick laminate is present. Clip
      hinges ( dadoo kabzaa ) to be used for fixing storage unit shutters.
      All work to be done complete in all respects.

13.   FULL HEIGHT STORAGE UNIT                                                      10 R. ft.
      Providing storage unit of size 18”’x7’0” (W x H) of ¾” thick
      commercial board with 1.5mm thick horizontal laminate and 1.0mm
      thick vertical laminate having one shelf in center. The storage unit
      will have all necessary hardware, decorative jalli pattern laminate
      band and teakwood/ partal wood beading / moulding. Recessed
      skirting (3/4”) finished with 1.0mm thick laminate is present. Clip
      hinges ( dadoo kabzaa ) to be used for fixing storage unit shutters.

                                                              7
            All work to be done complete in all respects.
      14.   WALL PANELLING :- Wall paneling to be providing on all wall                 250 sq. ft.
            surfaces as marked on drawing, comprising of 1 ½” x 1” wooden
            battens ( partal wood ) shall be covered with 6mm thick comm.. ply (
            phenol bonded, B.W.P., borer proof, chemically treated ) of century,
            green, goel make, 1mm thick laminate of approved make will be
            fixed over 6 mm ply with groove pattern as shown in
             drawings. Complete job including melamine polish on edge
            beading. Cornices etc. and painting of grooves in approved colour.
            All job to be done to architects’ satisfaction.
            Wall paneling Ht : 4’-3”
            Columns cladding ht. : 9’-3”

      15.   PIN UP BOARD :-                                                              250Sq. ft.
            Made of 12mm thick soft board covered by 25mm x 25mm teak
            wood beading painted polished to approved colour and soft board
            covered with blazer/ fabric cloth of approved colour. Texture and
            sample approved by architect. Notice Board to be fixed to wall space
            between storage unit ( ground placed ) and storage unit ( wall hung )
            in manager’s Cabin & on top of writing table & in Banking Hall.

      16.   FALSE CEILING:-
(a)         Providing and fixing Gypsum board false ceiling in levels as per the      1200 Sq. ft
            detailed drawing - made up of G.I. frames as specified by Gypsum
            India limited and 12mm thick Gypsum board with suitable
            suspenders fixed to the ceiling. Ceiling section, perimeter channel,
            suspenders etc. shall be standard sections supplied by Gypsum India
            LTD. Spacing of intermediate channels shall be at 1200c/c, and
            ceiling section at 457mm c/c.the work includes finishing of joints,
            applying primer, two or more coats of plastic emulsion paints,
            making cut-out for light fixtures, etc. providing of perimeter
            channels / beading etc. as per drawing.

(b)         Providing and fixing Armstrong/Equivalent false ceiling in levels as         800 Sq. ft
            per the detailed drawing - made up of Aluminum powder coated T-
            Section of company make at a distance of 2’-0” x 2’-0”. Ceiling
            tiles shall be placed on it and fixed as per company standard sections.
            the work includes finishing of joints, applying primer, two or more
            coats of plastic emulsion paints, making arrangement for light
            fixtures, etc.as per drawing.

      17.   HARDARE

            Providing and fixing of Godrej /Harrison night latches in cash cabin              2 Nos.
(a)         doors as per the directions of the Bank.
            Providing and fixing of Mortice locks of approved make in Main                 10 Nos.
(b)         door,Manager’s cabin, UPS, Record Room, etc. as per the directions
            of the Bank.
(c)         Providing and fixing hydraulic door closures of approved make &               9 Nos.
            color.

      18.   VERTICAL BLINDS :-                                                          300 Sq. ft.
            Providing and fixing perforated vertical blinds ( metallic of Luxflex (
            Trac / Luxury / Mac make of approved colours ( 50mm / 89 mm
            width) complete in all respects for Manager’s Cabin glazing and
            front side windows.

      19.   WRITING TABLE:- Providing and fixing semi circular writing                1.Nos
            table of size 3’-6” x 1’-9” at height 3’-9” made of ¾” thick
            commercial board finished with 1.5mm thick horizontal laminate. In
            the front two bands of laminate ( 3”, 2” wide ) are fixed on to 4mm
            thick ply. Two vertical boxes of size 5”x 9” are erected upto height:
            5-6” of 3.4” thick comm.. board finished with 1.0mm thk. Laminate.
            On the table top at 4” gap from wall paneling, space is created for
            placing various forms by vertically placing ¾” thick board ( size
            9”x4”) flanked by glass ( 8mm thick on either side ( size 7.5” x 4” )
            the table top is supported by 1.5” x 1.5” x 2 soot ISA grouted in wall.
            The top of vertical boxes is finished with horizontal box (6”x 3’-6”)
            made of ¾” thick commercial board scheme to be followed as per
            drawing



                                                                    8
 20.      SIDE TABLE :- Providing and placing side table of size 2’-0” x 2’-            4 Nos
          0” x 1’-6” of teakwood melamine polished with decorative beading
          along top to architects / bank managements satisfactory .

 21.      CENTER TABLE:- Providing and placing side table of size 3’-0” x               1.Nos
          2’-0” x 1’-6” of teakwood melamine polished with decorative
          beading along top to architects / bank managements satisfactory .

 22.      CHEQUE DROPPING BOX:- Made of ¾” thick commercial board                       1.Nos
          round in shape, 4mm marine plywood at the top cover. Edges
          covered with 18m x 18mm teak wood beading for the shape shown
          in the drawing, door made of 12mm marine plywood to the size of
          150mmx 230mm fixed with 2 Nos. of good quality 50mm brass
          hinges, inner surface painted with one coat of primer and two coats
          of enamel paint and outside finished with I mm thick laminate.or
          equivalent as per design ( Drawing enclosed). Note:- The cheque
          dropping box is to be fixed to the wall using screws.

 23.      ENAMEL PAINT :Applying two or more coats of synthetic enamel               1000 Sq. ft.
          paint over a coat of wood / metal primer on doors, windows, shutters,
          steel grills, ventilators, etc. as per directions of the bank/Architect.

 24.      PLASTIC EMULSION PAINT: Applying two or more coats of                      7000 sq. ft.
          plastic emulsion paint over a coat of primer on walls and ceiling. The
          work includes sand papering, applying of wall putty of Birla make,
          P.O.P etc. to give even and smooth finish as per directions of the
          bank.

 25.      FLOORING
  a)      Providing & laying of 2’ x 2’ Vitrified Tile flooring of approved          1600 sq. ft.
          make & shade viz. RAK (IMP-OFGY) or EURO (ATHENA) over
          necessary leveling screed of 1:4 cement mortar (20mm thick) with
          proper slope wherever required including pointing of the joints with
          white cement and matching pigments, curing etc. complete in all
          respects (excluding Toilets and Non – Customer area).

     b)   Providing and fixing anti skid ceramic tiles of size 12”x 12” ,9-10        800 Sq ft.
          mm thick of Approved colour to be fixed with Bal Gold Star
          adhesives(approved colour) manufactured by Bal Endura Adhesives
          India Pvt.Ltd. The proportion of Bal Gold Star adhesive shall be 1
          bag of 20 Kg mixed with 1 litre of AD-I liquid. All joints of the tiles
          shall be finished with the matching colour of floor tiles.
          The rate shall also include the cost of design patterns given in the
          floor plan as per directions by the bank/ Architect.


  26.     SANITARY INSTALLATION
a)        Providing and fixing white vitreous china pedestal type water closet          2.Nos
          no 2010. cs-2110 (European type W.C. pan) of cera make with seat
          and lid, with C.P. brass hingesand rubber buffers, 6 litre low level
          flushing cistern with fittings & C.I./M.S. brackets concealed type
          flush bend with fittings and clamps, overflow arrangement with
          specials of standard make and mosquito proof coupling of approved
          municipal design complete including painting of fittings and
          brackets, cutting and making good the walls and floors wherever
          required W.C. pan with white solid plastic seat and lid with white
          vitreous china flushing cistern with concealed type flush bend ,C.P
          jet spray system set, angle valves etc., Complete in all respect.

b)        Providing and fixing white vitreous china wash basin1031 of cera
          make with 15mm C.P. brass mixer taps, 32mm C.P. brass waste of
          standard pattern cutting and making good the walls including bottle
          trap, 2 Nos. of angle valves branded PVC connections complete set
          as directed by the bank / Architect.

c)        Providing and fixing stainless steel jali (grating)
          with or without hole for waste pipe for floor/Nahani trap.
          100mm Dia weight not less than 100gms complete in all respects.
d)        Providing and fixing towel rail complete with brackets fixed to
          wooden cleats with C.P. brass screws. CP brass towel rail with two
          CP brass brackets 600 x 20mm size complete in all respects.
                                                                   9
e)        Providing and fixing C.P. brass tap of approved quality confirming
          to IS standard 15mm nominal bore

f)        Providing and fixing soil CI pipes and G.I pipes of required sizes
          with necessary accessories for toilets and pantry to the nearest M.H/
          from water tank to supply outlets.

g)        Providing and fixing 8" x 8"/12" glazed tiles of Kajaria / Johnsons
          make in the colour scheme as per architects instructions, in toilet.
          The tiles shall be fixed with Adhesive of Silver star, quality of Bal
          Endura make . 3 to 6 mm thick bed of silver star shall be prepared
          for fixing the tiles. Grout of suitable / approved pigment of BAL
          ENDURA shall be used in the joint between successful tiles as
          directed by the bank / Architect.

h)        Providing and fixing of modiguard looking mirror 5 mm thk with 6
          mm thick BWP ply and teak wood beading of size 1"x2" including
          polishing on beadings complete as per the instruction of the
          Architect / Bank

i)        Urinal pots (large flat back) 5001,5011,5101 of cera of approved
          make Complete job including bottle trap, waste coupling, CP dome
          and all connections/ GI/ CI pipes required to take the discharge.


 27.      CIVIL WORK
  a)      Providing and erecting 4 ½” thick brick wall with bricks of class 75    100 sq.ft.
          designation in superstructure in cement mortar 1:6 (1 cement : 6
          coarse sand) including cement plaster 10 mm thick in 1:4 cement
          mortar..the work shall be completed in all respect .

     b)   Dismantling of existing manager’s chamber wall in banking hall and      1.Job
          making a provision of door from pantry side to ladies toilet and
          erection of 4 ½” thick wall in toilet to cover existing door and
          making RCC Slab in pantry size 5’-0” x 2’-0’ .the work shall be
          completed in all respect including plastering etc.

c)        Providing and fixing ¾” thick Jet black Granite with cement sand        20.Sq.ft.
          mortar (1:3)/ 9-10 mm thick of Approved colour to be fixed with Bal
          Gold Star adhesives(approved colour) manufactured by Bal Endura
          Adhesives India Pvt.Ltd. The proportion of Bal Gold Star adhesive
          shall be 1 bag of 20 Kg mixed with 1 litre of AD-I liquid. All joints
          of shall be filled with white cement mixed with pigment to match
          the colour of granite. The edges of granite shall be rounded and
          polished as directed by the bank / Architect

                          TOTAL (FURNISHING WORKS)




                                                                10
B.        ELECTRICAL WORKS
                                                                                                   Rate     Amount
Sl. No.                             Description of Item                                   Qty.
                                                                                                  (in Rs)   (in Rs.)

1.        COPPER PLATE EARTHING :-                                                    2No.
          Supplying and installation (Testing connection & commissioning of
          earth stations with 600 mm x 600 mm x 3 mm th. Copper plate
          electrode complete with 25mm dia. “B” Class G.I pipe 4.5 mtr.
          deep(minimum)for watering including funnel, 30 cm x 30 cm x 30
          cm masonry chamber with cover, 3” P.C.C. Bed in 1:4:8 concrete
          complete with 100 kgs.salt &200 kgs. charcoal filling ( as per IS :
          30435 Revised ) incl. Copper strip 1” wide 4mm th. From copper
          base plate up to Main Panal Board. Complete job to the satisfaction
          of the Architect / Bank Management Electrical consultant.
     2    ELECTRICAL WIRING AND POINTS :-
          Providing, laying, fixing & testing of electrical points including
          wiring with fire retardant, PVC insulated copper wire of Finolex
          make flame guard quality, moulded plate switches. Sockets of
          Crabtree / platinum quality / North west / Anchor Roma ( Beige /
          ivory colour ) in concealed zinc passivated boxes complete with
          earthing 1.00 mm 2 multistrand wire in pvc pipe 12mm/24mmx2mm
          ISI marked to be made run on wooden battens, false ceiling, chased
          in walls floors, disposal of malba and repair and finished of same
          with cement mortar as per existing. Complete job to the satisfaction
          of the architect.
a)        Wiring light points by laying 1.5 sq.mm copper wire independent             60. pts.
          control with 6 amp switch.
b)        Wiring 2 light points by laying 1.5 sq . mm copper wire with 6 amp          40 pts.
          switch.
c)        Wiring raw power points ( 3 pin 5/15 amp. power plug ) by laying            20. pts.
          copper wire 2.5 sq.mm in 1” PVC pipe
     3    MAIN CABLE :- Supplying/erection of copper cable size 4 core 16             60. Mtrs.
          sq. mm PVC insulated conductor cable 1100 volts(finolex make.
          Flame guard quality)         grade on existing wall, false ceiling (
          concealed in customer lobby ) from meter board to branch panel
          board.
          MAIN PANEL BOARD.
     4     Voltmeter, Am-meter, selector switch ,CTs, back up fuses                   One set.
          Incoming: 100 Amp TPMCCB -1 No.
           3 phase Neutral 100 Amp copper
           busbar -1set.
          63Amp change over switch with HRC fuses. Outgoing: 100Amp
          TPMCCB-1No.
           63Amp TPMCB-3Nos.
          40Amp DPMCCB-2Nos.
          cable allies on all three sides. The cubicle panel shall be fabricated of
          16 gauge MS sheet of superior paint over one coat of primer. The
          cable shall be property terminated with the help of cable glands /
          thimbles etc. ( switches shall be L&T/E-E/Havells / Standard make
          only).
     5.   DISTRIBUTION BOARD FOR LIGHT POINTS. POWER                                  2 Nos.
          POINTS.
          S/E of4WTPN D/B with Incoming -1No 63Amp TPCCB & 6 Amp.
          for lighting.1Nos. 63Amp .TPMCB Incoming & outgoing.
           63Amps. DPMCB -3Nos.
          40Aps. DPMCB-3Nos. for power points.
          The main incoming in each D/B shall be controlled through ELCB of
          30 mA having 30m Sec. Sensitivity. The cost includes making all
          connections etc. It should be either of havells or standard make
          For Light points :1 No , For Power Points : 1 No
6.        Distribution Board for UPS supply :-                                        1. No.
          12 Way TPN of Indo Asian / Havell / L&T / Heyger make fixed with
          SP MCB’s of 6 AMP. 10A 20A rating complete job including
          Incoming -63Amps. TPMCB.-1No ,outgoing -6to20 Amps. SPMCB-
          12 nos for input, output and making all necessary connections for
          computer circuits, complete in all respects
   7.     UPS Wiring For Computer :-                                                  15. pts.
(a)       Supply and erection of wiring set for computers in zinc passivated
          boxes embedded in walls/partitions to accommodate 3 Nos. 6 amp

                                                                   11
            switch socket with 1.5 sq. mm copper conductor, PVC insulated ISI
            marked cable alongwith independent earth wire of 1/18 run in 2mm
            thick PVC conduits. Maximum 2 computer terminals to be done to
            architects /Electrical consultant.
     8.     Supply and Erection of following light fittings, recessed, ceiling
            mounted or surface mounted, complete job including reflector, CFL /
            FTL / GLS lamps, control gear, connections etc.
(a)         Wipro make recessed mirror optic luminaire WCF 17236 2x36W                18 Nos.
            CFL.
(b)         Recessed ceiling light fixture Wipro make compatible for 2x18W            10 Nos.
            CFL lamps.
            Cat No.wcp36213/218
(c )        Recessed ceiling light fixture Wipro make compatible for 1x18W            18 Nos.
            CFL lamps.
            Cat No.wcp-36113/118
d)          Ordinary single tubelight with all fittings including fluorescent rods    9 Nos.
            along with bulb holder for service area. Wipro make Cat No. WDF-
            9140
(e )        Ordinary 1x40w tubelight with all fittings including tube rods of         12Nos.
            warm version for cove lighting of ceiling pelmet lighting of storage
            unit. Wipro make Cat No. WRF-83136
     9.     Supplying / erection of wall mounted fans 15” dia inclusive of            25 Nos.
            erection / testing and commissioning of the same ( Usha Lexus /
            Compton Greaves/orient).
10.         Supplying / erection /commissioning of Heavy duty exhaust fans of         3 Nos.
            Polar/G.E.C/ Compton greaves make of size 12” dia complete in all
            respects.
11.         Making electrical points for Air-conditioners with 2nos 6 mm sq.          9 Nos.
            thick wires 1no.4 mm sq. PVC wire of finolax make including under
            ground conduiting and metal clad enclosure of 32 Amp. switch,
            socket & plug. complete in all respects. Three phase servo type AE
            make or Packard
14          Provided and laying telephone 4 pair cable in PVC conduits                10 Pts.
            including all fittings, complete in all respects.
15.         Generator connection : Providing and laying copper cable 2x6              1 Nos.
            sq.mm connections from generator set of 25 KVA from the main
            board to the outgoing circuits, the light fittings/ fans should be
            energized through generator set when put to use. Work to be done
            complete in all respects
            TOTAL ( ELECTRICAL WORKS)

C: DATA CABLING WORK:
S.NO DESCRIPTION OF ITEM                                                                QTY.      Rate       Amount.
                                                                                                  (in Rs.)   ( in Rs.)

1.        Making Computer points with Cat-VI wire / cable, RJ-45 plate.               15 Pts.
          Complete from router to each table all underground in PVC conduit .
          Complete in all respects.

2.        Supply and installation of 16 port unmanaged switch 10/100                  1 No.
          MBPS of D- Link make.
3.        Supply and installation of 16 port jack panel of D-Link make.               1 No.
4.        Supply & installation of 9 U mounted rack 18” height made of                1 No.
          power coated MS sheet of D link make coated MS sheet of D
          link make
5.        Supply and installation of 10 plates and SMB as reqd. complete              15 Nos.
          with accessories of D link make 100 mbps.
6.        Supply and installation of patch cards
(a)       Patch cards ( 1 Meter ) of D link make                                      15 Nos.
( b)      Patch cards ( 2 Meter ) of D link make                                      15 Nos.
          Total (DATA CABLING WORK)



SUMMARY:-                               FURNISHING WORKS                        Rs.
                                        ELECTRICAL WORKS                        Rs.
                                        DATA CABELING WORKS                     Rs.
                                                                                            __________________
                              TOTAL                                             Rs.
                                                                  12
     ____________________




13

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:3
posted:7/31/2011
language:English
pages:13