Docstoc

Bill of Quantities - Mizoram University

Document Sample
Bill of Quantities - Mizoram University Powered By Docstoc
					                                                          1. BILL OF QUANTITIES (BOQ) FOR CIVIL WORKS-A

Name of Work : Construction of 1000 Capacity Auditorium at MZU, Tanhril                              Tender Amount for Civil Works = Rs.64972416.86p
                                                                                                     Rate
SL.   SOR
                                    Particulars                        Qty      Unit                                                      Amount
No.    No                                                                              In figures           In words

 1    2.06 Earthwork in excavation over areas (exeeding 30cm in
           depth,1.5m in width as well as 10sqm on plan)
           including disposal of excavated earth, lead upto 50m
                                                                     10973.60   m3
           and lift upto 1.5m, disposed earth to be levelled and
           neatly dressed.
           a) Oridinary and Hard Soil

 2    2.07 Earthwork in excavation in foundation trenches or
           drains etc. (not exceeding 1.5m in width or 10sqm on
           plan) including dressing of sides and ramming of
           bottoms, lift upto 1.5m including getting out excavated   1829.90    m3
           soil and disposal of surplus excavated soil as directed
           within a lead of 50 metres.
            b) Hard Soil ( pick work ).

 3    4.07 Providing and laying cement concrete 1:4:8 (1 cement :
           4 coarse sand : 8 graded stone aggregate 40mm
           nominal size) excluding cost of centering and              76.90     m3
           shuttering in -
            a) All work upto foundation & plinth level.

 4    5.42 Providing and laying in position machine batched,
           machine mixed and machine vibrated design mix M-20
           grade reinforced cement concrete excluding cost of         162.33    m3
           centering and shuttering and reinforcement in -
            a) All work upto foundation & plinth level.
         b) Walls, columns, pillars, posts and struts upto floor
         two level or floor two below from the ground floor (as         351.78     m3
         indicated in the drawing).


         c) Beams, plinth beams, girders, bressumers,
         cantilevers, suspended floors, lintels, roofs, staircases,
         spiral staircases, shelves, etc. upto floor two level or       866.18     m3
         floor two below from the ground floor (as indicated in
         the drawing).


5   MR HYSD bars (Fe500) reinforcement for RCC work
       including straighthening, cutting, bending, placing in
                                                                       302794.52   kg
       position and binding all complete.


         Centering and shuttering including strutting, propping,
6   5.08 etc. and removal of form works in -
         a) Foundations, footings, bases of columns etc. for mass
         concrete.                                                      151.68     m2

         c) Columns, pillars, piers, abutments, posts and struts.
                                                                        2387.95    m2

         d) Lintels, beams, plinth beams, girders, bressumers
         and cantilevers, etc.                                          2795.83    m2

         e) Suspended floors, roofs, landings, shelves and their
         support, balconies and chajjaj, etc.                           2561.63    m2

         f) Staircases (except spiral staircase) excluding landings.
                                                                        727.75     m2
          k) Vertical and horizontal fins individually or forming
          box, louvres and bends, eaves boards.                       67.20    m2

7    2.18 Filling available excavated earth (excluding rock ) in
          trenches, plinth, etc. in layers not exceeding 20 cms in
          depth, consolidating each layer by ramming and             3906.90   m3
          watering and dressing lead upto 50 meters and lift upto
          1.50 meters.


8    7.06 Coursed masonry with rectangular sized hard stone in
          foundation upto one storey above and below ground          1321.38   m3
          level including curing, etc. complete.

          b) in cement mortar 1 : 4 ( 1cement : 4 fine sand)

9    6.05 Half brick masonry with first class brick in foundation
          upto one storey above and below ground level               3048.54   m2
          including curing, etc. complete.

          b) in cement mortar 1 : 4 ( 1 cement : 4 fine sand )

10   5.15 Providing and fixing MS fan clamp 12mm dia HYSD
          bar bent to shape with hooked endin RCC slabs during
          laying including painting the exposed portion of loop        30      Nos
          complete.


11   9.05 Providing Ist class teak wood dressed in frames of
          chaukhat for doors, windows, clerestory windows fixed
                                                                      3.28     m3
          in position.
12   14.01 Providing 40 x 5mm flat iron hold fast 40 cm long
           including fixing to frame with 10mm dia. bolts, nuts
           and wooden plugs and embeddings in cement concrete
                                                                         324     Nos
           block 30 x 10 x 15cm 1:3:6 mix (1 cement : 3 sand : 6 well
           graded stone aggregate 20 mm nominal size)


13   MR Providing and fixing 12mm thick toughened glass
        shutters for doors etc. includingnecessary hinges with
        necessary screws, etc. complete.                                14.07    m2




14   9.11 Providing and fixing 1st class local wood panelled
          shutters for doors etc. including M.S. butt hinges with
          necessary screws, etc. complete.                              60.17    m2




15   9.41 Providing and fixing 25mm thick marine ply flush door
          shutters, core of block board construction including
                                                                        36.23    m2
          M.S, butt hinges with necessary screws etc. complete .



16   9.61 Providing and fixing dressed & chamfered 1st class
          local wood door and window architrave of size fixed           497.40   m
          with wooden plug on door chaukhat etc complete.
           100mm X 30mm
17   14.28 Providing and fixing brass sliding door bolts (aldrops)
           bright finished with nuts and screws etc. complete.           48      Nos

           a) 300 x 16 mm
18   14.29 Providing and fixing brass tower bolts (socket bolts)
           bright finished with necessary screws etc. complete.       72      No

           a) 250 mm

19   14.32 Providing and fixing brass handles with necessary
           screws, etc. complete.                                    120      No

           a) 125 mm
20   MR Structural glazings as per specifications including

                                                                    467.54    m2

        necessary glass for full glazing
21   MR Providing and fixing anodised aluminium work for
        doors, windows, ventilators and partitions with
        extruded built up standard tubular and other sections
        of approved make conforming to IS: 733 and IS : 1285,
        anodised transparent or dyed to required shade
        according to IS : 1868. (Minimum anodic coating of
        grade AC 15), fixed with rawl plugs and screws or with
        fixing clips, or with expansion hold fastners including
        necessary filling up of gaps at junctions, at top, bottom   142.12    m2
        and sides with required PVC/neoprene felt etc.
        Aluminium sections shall be smooth, rust free, straight,
        mitred and jointed mechanically wherever required
        including cleat angle, Aluminium snap beading for
        glazing / paneling, C.P. brass / stainless steel screws,
        all complete as per architectural drawings and the
        directions of Engineer-in-charge. (Glazing and paneling
        included ) .
22   21.17 20mm cement plaster 1 : 4 (1 cement : 4 fine sand).
                                                                    1718.50   m2
23   21.13 15mm cement plaster 1 : 4 (1 cement : 4 fine sand).
                                                                     4445.78   m2

24   21.27 6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine
           sand).                                                    6085.21   m2

25   4.06 Providing and laying cement concrete 1:3:6 (1 cement :
          3 coarse sand : 6 graded stone aggregate 40mm
          nominal size) excluding cost of centering and              188.21    m3
          shuttering in - All works upto foundation and plinth
          level
26   12.31 Providing & laying Marbonite tiles 10.5mm thick of any
           shade laid on bed of 20mm thick cement mortar 1 : 4 in
           floors, treads of steps and landings jointed with neat
           cement slurry including finishing joints with grouting
           in white cement mixed with pigment of matching shade      1495.22   m2
           complete./including cutting where necessary finishing
           with flush pointing with Fix-A-tile (Choksey/ Sika/
           Pedelite/ Rout)/ Bal Endura with Bal Endura grout
           complete. a) Fixed with white cement
27   12.32 Marbonite tiles of thickness not less than 8mm thick of
           any shade in wall, skirting and risers of steps not
           exceeding 30cm in height, on 12mm thick cement
           plaster 1 : 3, including cutting where necessary           60.88    m2
           finishing with flush pointing with Fix-A-tile (Choksey/
           Sika/ Pedelite/ Rout) / Bal Endura with Bal endura
           grout complete. a) Fixed with white cement
28   12.35 Providing & laying Paver tiles of approves quality, size,
           shape and thickness not less than 8mm of approved
           brand of any shade laid on bed of 20mm thick cement
           mortar 1 : 4 in floors, treads of steps and landings
           jointed with neat cement slurry including finishing
           joints with grouting in white cement mixed with             71.36    m2
           pigment of matching shade complete.or/ including
           cutting where necessary finishing with flush pointing
           with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout)/ Bal
           Endura with Bal endura grout complete.         a) Fixed
           with white cement
29   12.43 White/coloured marble stone slab of size not less than
           1200mm x 600mm x 20mm thick and above in flooring,
           treads of steps and landings laid over 20mm (average)
                                                                       271.51   m2
           thick base of cement mortar 1:4 and jointed with white
           cement slurry including rubbing and polishing
           complete. d) Pearl Super white
30   12.44 White/coloured marble stone 20mm thick in skirting,
           riser of steps, dado, walls and pillars laid on 12mm
           (average) thick base of cement mortar 1:3 and jointed       44.71    m2
           with white cement slurry including rubbing and
           polishing complete. d) Pearl Super white
31   12.23 Ceramic tiles 7.1mm thick conforming to IS : 13753 in
           wall, skirting and risers of steps not exceeding 30cm in
           height, on 12mm thick cement plaster 1 : 3, jointed with
                                                                       445.80   m2
           neat cement cement slurry including pointing in white
           cement mixed with pigment of matching shade
           complete.       a) (ii) Plain 200 mm x 300 mm
32   26.04 Providing and fixing stone slab table rubbed and
           polished of size 105cmx60cm deep and 1.8 cm thick
           fixed in urinal partitions with cement concrete 1:2:4 (1
           cement : 2 coarse sand : 4 graded stone aggregate 6 mm          16.88    m2
           nominal size) and finished smooth. a) White Agaria
           Marble Stone


33   MR Supplying and fixing of Stainless Steel railing with
        necessary ballusters, railings etc as per detailed
        drawings                                                          138.20    rm


34   10.13 Providing and fixing M.S tubular section in built up
           section of truss welded in position including cutting,
           hoisting, fixing in position and applying priming coat         8772.25   kg
           with approved steel primer etc. complete.

35   16.37 Providing Trapezoidal Polyester Coated Galvanised
           Steel Sheets Roofing of any colour manufactured by
           DYNA ROOF of 1.06m width at all levels including
           fitting and fixing ridging with self drilling , self tapping   549.68    m2
           screws, EPDM washers etc. complete excluding the cost
           of purlin, rafter and trusses. ii) For 0.55mm thick :


36   16.38 Providing and fixing of Polyester Coated Galvanised
           Steel Sheets of any colour manufactured by DYNA
           ROOF ridges, gutters or valleys 50cm overall width
           0.50mm thick with 150 mm overlapping fixed with Self            22.30    rm
           Drilling & Tapping Screws with EPDM washer but
           excluding the cost of base frame. ii) 0.55 mm thick
37   15.48 Providing and fixing at all height false ceiling of
           12.5mm thick tapered edge gypsum board conforming
           to IS : 2095 including providing and fixing of frame
           work made of special sections power pressed from M.S.
           sheet and galvanised in accordance with zinc coating of
           grade 350 as per IS : 277 and consisting of angle cleats
           of size 25mm wide x 1.6mm thick with flanges of 22mm
           and 37mm at 1200mm centre to centre one flange fixed
           to the ceiling with dash fastner 12.5mm dia x 40mm
           long with 6mm dia bolts to the angle hangers of             2134.00   Sqm
           25x25x0.55mm of required length, and other end of
           angle hanger being fixed with nut and bolts to G.I.
           channels 45x15x0.9mm running at the rate of 1200mm
           centre to centre to which the ceiling section 0.5mm thick
           botton wedge of 80mm with tapered flanges of 26mm
           each having clips of 10.5mm at 450mm centre to centre
           shall be fixed in a direction perpendicular to G.I.
           channel with connecting clips made out of
           2.64mm dia x230mm long G.I. wire at every junction
           including fixing the gypsum board with ceiling section
           and perimeter channels 0.5mm thick 27mm high having
           flanges of 20mm and 30mm long, the perimeter of
           ceiling fixed to wall/partition with the help of rawl
           plugs at 450mm centre to centre with 25mm long drive-
           all screws @ 230mm interval including jointing and
           fixing to a flush finish of tapered and square edges of
           the gypsum board with recommended filler, paper
           tapes, finisher and two coats of primer suitable for
           gypsum board as per manufactures specification and
           also including the coat of making openings for light
           fittings, grills, diffusers, cutouts made with frame of
           perimeter channels suitably fixed all complete as per
           drawing and specification and direction of the Engineer-
           in- Charge but excluding the cost of painting.



38   20.44 Applying double coated cement slurry with water
           proofing chemical (latex or equivalent chemical) in
           proportion 1 : 4 : 5 ( 1 latex : 4 water : 5 cement )      720.78   m2
           including cleaning the treated surfaces with brushes
           etc.


39   20.46 Extra for providing and mixing water proofing
           chemical (latex or equivalent chemical) @ 2kg per bag
           of cement in - c) 15mm cement plaster 1 : 3 (1 cement :    720.78   m2
           3 fine sand).
40   20.44 Applying double coated cement slurry with water
           proofing chemical (latex or equivalent chemical) in
           proportion 1 : 4 : 5 ( 1 latex : 4 water : 5 cement )      720.78   m2
           including cleaning the treated surfaces with brushes
           etc.
41   20.34 Applying double coated Dr. FIXIT PROOFCOTE
           BLACK on the surface of cement concrete for
           prevention of water infiltration and dampness in water
                                                                       166.10   m2
           tanks,sunken slab,basement, terraces, etc. @ 0.55 Litre
           per sqm.

42   16.32 Providing and fixing on wall face unplasticised Rigid
           PVC rain water pipes conforming to IS : 13592 Type A
           including jointing with seal ring conforming to IS : 5382   283.50   m
           leaving 10 mm gap for thermal expansion.(i) Single
           socketed pipes :

43   16.33 Providing and fixing on wall face unplasticised - PVC
           moulded fittings/ accessories for unplasticised Rigid
           PVC rain water pipes conforming to IS : 13592 Type A
           including jointing with seal ring conforming to IS : 5382    42      No
           leaving 10 mm gap for thermal expansion.
           A Single pushfit Coupler : a) 110 mm

44   16.34 Providing and fixing unplasticised -PVC pipe clips of
           approved design to unplasticised - PVC rain water
           pipes by means of 50x50x50mm hard wood plugs,
           screwed with M.S. screws of required length including        126     No
           cutting brick work and fixing in cement mortar 1:4 (1
           cement : 4 coarse sand) and making good the wall etc.
           complete. b) 110 mm
45   16.35 Providing and fixing to the inlet mouth of rain water
           pipe cast iron grating 15 cm diameter and weighing not       21      No
           less than 440 grams.
46   26.01 Making plinth protection 50mm thick of cement
           concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
           aggregate 20 mm nominal size) over 75mm bed of dry
           brick ballast 40mm nominal size well rammed and             107.40   m2
           consolidated and grouted with fine sand including
           finishing the top smooth.
47    2.23 Diluting and injecting chemical emulsion for post
           constructional anti termite treatment with
           Chlorpyriphos/Lindane emulsifiable chemical 20%
           with 1% concentration.
           c) Treatment of soil under existing floor using chemical 1882.12     m2
           emulsion @ 1 litre per hole, 300mm apart including
           drilling 12mm diameter holes and plugging with
           cement mortar 1:2 (1 cement : 2 coarse sand) to match
           the existing floor
48   21.65 Applying one coat of distemper primer of approved
           brand and manufacture on wall surface.                   10530.99    m2

49   21.85 Distempering with 1st quality acrylic washable
           distemper of approved brand and manufacture and of
           required shade and colour to give an even shade on        10530.99   m2
           new work (two or more coats).

50   21.89 Finishing walls with water proofing cement paint of
           approved brand and manufacture and of required
           shade on new work (three or more coats) to give an even   1718.50    m2
           shade.

51   21.83 Applying priming coat with ready mixed primer of
           approved brand and manufacture on wood work and
                                                                      192.78    m2
           plywood complete. a) Ready mix white primer.

52   21.93 Painting with synthetic enamel paint of approved
           brand and manufacture in all shade on new work (two
                                                                      192.78    m2
           or more coats). a) General quality

53   21.100   Varnishing with copal varnish of approved brand and
              manufacture on new work (two or more coats) of glue
              sizing over an under coat of flatting varnish.          49.74     m2
54   17.03 Providing and fixing vitreous china water closet
           squatting pan ( Orissa type ) with 100mm SCI 'P"/'S'
           trap, of Parryware/ Hindware/ Cera and equivalent          29   nos
           make, including cutting and making good the walls
           and floors wherever required. b) Big ( 580 x440mm)
55   16.42 Providing and fixing vitreous china Urinal Flat Back
           Small 44 x 26.5 x 31.5cm size of Parryware/ Hindware/
           Cera and equivalent make with flush valve/spray with
           C.I or R.S brackets standard size of G.I flush pipe and
                                                                      15   nos
           C.P brass spreaders with brass unions and G.I clamps
           complete including painting of fittings and brackets,
           cutting and making good the walls and floors wherever
           required. i) White
56   17.62 Providing and fixing vitreous china low level flushing
           cistern of Parryware/Hindware/Cera and equivalent
                                                                      15   nos
           make with fittings such as lead valve less syphone, etc.
           and C.P. brass handle complete. i) White
57   17.74 Providing and fixing vitreous china wash basin
           compact of Parryware/ Hindware/ Cera and
           equivalent make with R.S. or C.I. brackets, 15mm C.P.
           brass pillar taps, C.P. brass chain with rubber plugs,
           32mm C.P. brass waste of standard pattern, 32mm C.P.       27   nos
           brass traps and union complete including painting of
           fittings and brackets, cutting and making good the
           walls wherever required. i) White (b) Compact wash
           basin of size 450x300mm without pillar tap.
58   17.90 Providing and fixing vitreous china tall pedestal of
           Parryware/ Hindware/ Cera and equivalent make for
                                                                      27   nos
           wash basin completely recessed at the back for the
           reception of pipes and fittings. i) White
59   17.119   Providing anf fixing 600x450mm bevelled edge mirror
              of superior glass (of approved quality) complete with
                                                                          27      nos
              6mm thick asbestos sheet ground fixed to wooden
              cleats with C.P. brass screws and washers.
60   17.123   Providing and fixing C.P. brass towel rail with two C.P.
              brass brackets to wooden cleats with C.P. brass screws.     27      nos
              b) 600x20mm size.
61   17.125   Providing and fixing toilet paper holder. b) C.P. brass
                                                                          29      nos
              toilet paper holder of standard size.
62   17.127   Providing and fixing chromium plated soap dish with
                                                                          29      nos
              brackets fixed to wooden cleats with brass screws.
63   17.128   Providing and fixing M.S holder bat clamps of
              approved design to sanitary / drainage pipe embedded
              in and including cement concrete block 10x10x10cm of
                                                                          116     nos
              1:2:4 mix (1cement : 2coarse sand : 4aggregate 20mm
              nominal size) including cost of cutting holes and
              making good the wall etc. complete. a) 100mm dia.
64   17.129   Providing and fixing sand cast iron (Spun) soil, waste
                                                                         458.00   rm
              and vent pipe. a) 100mm dia.
65   17.130   Providing and fixing sand cast iron bend of required
              degree with access door, insertion rubber washer 3 mm       332     nos
              thick, bolts and nuts complete. a) 100mm dia.
66   17.132   Providing and fixing sand cast iron heel rest sanitary
                                                                          15      nos
              bend. a) 100mm dia.
67   17.136   Providing and fixing sand cast iron single equal plain
                                                                          58      nos
              junction of required degree. a) 100x100x100mm.
68   17.143   Providing and fixing sand cast iron trap of self
              cleansing design with sand cast iron screwed down or
              hinged grating with or without vent arm complete           29       nos
              including cost of cutting and making good the walls
           and floors. a) 100 mm inlet and 100 mm outlet.
69   18.02 Providing and fixing on terrace (at all floor levels)
              Polyethylene storage tank of approved brand and
              manufacture with cover and mosquito proof coupling
                                                                       12000.00   ltrs
              and suitable locking arrangement and making
              nescessary connections for inlet, outlet and overflow
           pipes but without the cost for base support.
70   18.32 Providing and fixing CPVC pipes complete with CPVC
              fitting for water supply including clamps at one metre
              spacing, cutting and making good the walls etc.           313.00    rm
              (internal works) exposed on walls. a) 15mm dia.
           nominal bore
71   18.33 Extra for concealed in brick and RCC works by making
           chases upto 7.5x7.5cm in walls and making good the           313.00    rm
           same after housing pipes, etc. a) 15mm dia. nominal
           bore
72   18.34 Providing and fixing CPVC pipes complete with CPVC
              fitting for water supply, including trenching and         81.00     rm
           refilling etc. (external work). c) 25mm dia nominal bore
73   18.16 Providing and fixing chromium plated brass bib cock of
                                                                         56       No
              approved quality. a) 15mm nominal bore
                                                                                                                         Total Amount for A =


In Words = (Rupees_______________________________________________________________________________________________________________________________________)only.
                                      2. BILL OF QUANTITIES (BOQ) FOR SEPTIC TANKS-2NOS. - B

Name of Work : C/o 1000 Capacity Auditorium at MZU, Tanhril                               Tender Amount for Septic Tank= Rs.221056.66p
SL. SOR                                                                                          Rate
No No                      Particulars                        Qty     Unit                                                    Amount
                                                                             In figures                 In words
 .
 1  2.07 Earthwork in excavation in foundation
         trenches or drains etc. (not exceeding 1.5m in
         width or 10sqm on plan) including dressing of
         sides and ramming of bottoms, lift upto 1.5m
         including getting out excavated soil and             76.25   m3
         disposal of surplus excavated soil as directed
         within a lead of 50 metres.
         b) Hard Soil ( pick work ).

 2   4.07 Providing and laying cement concrete 1:4:8 (1
          cement : 4 coarse sand : 8 graded stone aggregate
          40mm nominal size) excluding cost of centering              m3
                                                              4.58
          and shuttering in - All work upto foundation
          & plinth level.

 3   6.01 First class brickwork in foundation upto one
          storey above and below ground level
          including curing, etc. complete.                    11.35   m3
          b) in cement mortar 1: 4 ( 1 cement : 4 fine
          sand )
 4   6.05 Half brick masonry with first class brick in
          foundation upto one storey above and below
          ground level including curing, etc. complete.       6.00    m2
          b) in cement mortar 1: 4 ( 1 cement : 4 fine
          sand )
 5   21.17 20mm cement plaster 1 : 4 (1 cement : 4 fine
           sand).                                             42.55   m2
6    5.01 Providing and laying reinforced cement
          concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded
          stone aggregate 20mm nominal size) excluding
          cost of centering and shuttering and
          reinforcement in -                              c)
          Beams, suspended floors, roofs having slope            3.12    m3
          upto 15 degree, landings, balconies, shelves,
          chajjas, lintels, bands, window sills, stair cases,
          spiral stair cases, cantilevers upto floor five
          level.
7    5.08 Centering and shuttering including strutting,
          propping, etc. and removal of form works in -
          e) Suspended floors, roofs, landings, shelves         24.00    m2
          and their support, balconies and chajjaj, etc.


8    5.06 HYSD bars reinforcement for RCC work
          including straighthening, cutting, bending,
                                                                249.60   Kg
          placing in position and binding all complete.

9    2.21 Providing and filling stone aggregates of size
          below 90mm in plinth, etc. in layers not
          exceeding 20 cms in depth, consolidating each         18.80    m3
          layer by ramming and watering and dressing
          complete.

10   17.129   Providing and fixing sand cast iron (Spun)
                                                                56.00    rm
              soil, waste and vent pipe. 100mm dia.
     17.136   Providing and fixing sand cast iron single
                                                                 6.00    No
11            equal plain junction of required degree.
                                                                                                     Total Amount for B =


      In Words = (Rupees_______________________________________________________________________________________________________)only.
                                               3. BILL OF QUANTITIES (BOQ) FOR WATER TANK - C

Name of Work : C/o 1000 Capacity Auditorium at MZU, Tanhril                                    Tender Amount for Septic Tank= Rs.582020.55p
SL. SOR                                                                                             Rate
                              Particulars                          Qty     Unit                                                   Amount
No No                                                                             In figures               In words
 .
 1 2.07 Earthwork in excavation in foundation trenches             175     m3
        etc. not exceeding 2 meters depth including
        dressing of bottom and sides of trenches and
        subsequent filling as in column foundations, fence
        posts, etc. and disposal of all surplus soil as
        directed within a lead of 30 metres. b) Hard Soil (
        pick work ).
 2 4.07 Providing and laying cement concrete 1:4:8 (1               7.5    m3
        cement : 4 coarse sand : 8 graded stone aggregate
        40mm nominal size) excluding cost of centering and
        shuttering in - All work upto foundation & plinth
        level.
3    5.42 Providing and laying in position machine batched,
          machine mixed and machine vibrated design mix
          M-20 grade reinforced cement concrete excluding
          cost of centering and shuttering and reinforcement
          in -
          a) All work upto foundation & plinth level.              7.31    m3
          c) Beams, suspended floors, roofs having slope           5.48    m3
          upto 15 degree, landings, balconies, shelves,
          chajjas, lintels, bands, window sills, stair cases,
          spiral stair cases, cantilevers upto floor five level.
          b) Walls including attached pillasters, columns,         17.23   m3
          pillers, posts, piers, abutments, return walls,
          retaining walls, struts, buttresses, string or lacing
          courses, fillets etc. upto floor five level.
4   20.26 Providing and mixing water proofing chemical (          30      m3
          PIDIPROOF POWDER chemical) in plain and
          reinforced cement concrete work 1 : 1.5 : 3 , @ 1.0
          % by weight of cement.
5   5.08 Centering and shuttering including strutting,           8.98     m2
          propping, etc. and removal of form works in -
          a) Foundations, footings, bases of columns etc. for
          mass concrete.
          b) Walls including attached pillasters, buttresses,   191.40    m2
          string courses, etc.
          e) Suspended floors, roofs, landings, shelves and      36.81    m2
          their support, balconies and chajjaj, etc.

6   MR HYSD bars (Fe500) reinforcement for RCC work             3001.85
       including straighthening, cutting, bending, placing
       in position and binding all complete.
7   21.25 20mm cement plaster 1 : 4 (1 cement : 4 fine sand)    135.30    m2
          finished with a floating coat of neat cement
    21.46 Extra for providing and mixing water proofing         135.30
          material 'Impermo' of M/s Snowcem India Ltd., or
          equivalent in cement plaster work in proportion
          recommended by the manufacturers : (f ) 20 mm
          cement plaster 1:4 (1 cement : 4 sand)
9    LS   Providing and fixing GI pipes for draining,            3.00     No
          overflowing and interflow of water in water tank
          etc complete 100F GI pipe
                                                                                                         Total Amount for C =

       In Words = (Rupees_______________________________________________________________________________________________________)only.
                                                 4. BILL OF QUANTITIES (BOQ) FOR ACCOUSTIC - D

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                       Tender Amount for Accoustic = Rs.6502650.00p
                                                                                           Rate
Sl No                        Description                        Qty    Unit                                                     Amount
                                                                              In figures        In Words
        WALL ACOUSTICAL TREATMENT
  1     Providing & Fixing of Accoustic Wooden Wall
        Panelling using 1.0mm thick GI grid of 150X65mm
        @1200mm C/C (Max) and finished with 6mm thick teak
        wood veneeing on 8mm plywood with lacquer polish as 200        Sqm
        per drawing and as directed by the consultant (Make:
        Greenply, Century)

  2     Providing & Fixing of Accoustic Perforated Gysum
        Wall Panelling using 0.8mm thick GI Grid of 50X50mm
        @600mm C/C (Max), backed with 50mm thick
        24Kg/M3 Fibre Glass wool protected with F.G.Tissue
        Paper and covered with fully perforated 600X600mm
                                                                 300   Sqm
        gypsum tiles and finally finished with 1 coat of acrylic
        primer and 2 coats of acrylic plastic emulsion paint as
        per drawing and as directed by the consultant (Make:
        India Gypsum, Lafarge)

  3     Providing & Fixing of Fabic Covered Accoustic Wall
        Tiles of Size 600X600X25mm on 0.8mm thick GI Grid
        of 50X50mm @600mm C/C (Max) as per drawing and
        as directed by the consultant (Make: Anutone, 100              Sqm
        Armstrong). Note: The fabric design and colour has to
        be approved by the consultant.
4   Providing & fixing of black coloured acoustic wood
    wood wool tiles for Stage Walls of size
    600x600X20mm having a denisity of 500 Kg/M3
    directly screwed on 0.8mm thick GI Grid of 50X50mm
    at 600X1200mm C/c (max) leaving a 50mm air gap
                                                             400   Sqm
    between the wall and wood wool panel and finally
    finished with 2 coats of synthetic enamel paint as per
    tender drawings and as directed by the consultant for
    stage and wing area (Make: Aunotone / Fibrecrete)

5   Providing & fixing of Teak Wood Skirting on bottom
    and top of wooden wall panelling duly polished with
                                                           150 R Mtr
    spirit and stain as per drawing and as directed by the
    consultant

6   Providing & fixing of double leaf Accoustic Doors
    made using 100mm thick hard wood hollow framing
    filled with 24Kg/M3 desnity fibre glass wool, fixed with
    8mm water proof ply wood on both sides, finally pasted
    with teak vineer on both sides duly polished, consisting
    of peripheral seals all around on existing 150mm wide
                                                             15 Sq Mtr
    Sal chowkhat, with small small 150mm X 150mm glass
    winodw, with complete hardware including panic bars,
    steel hinges with ball bearings, latches, pad lock, lock
    etc complete in all respect and as directed by the
    Consultant


    CEILING TREATMENT
7   Providing & fixing of black coloured Soft Mineral Fibre
    Ceiling tiles of size 600x600X20mm with high NRC
    value greater than 0.9 on a black powder coated GI T
                                                            650    Sqm
    grid framework as per tender drawings and as directed
    by the consultant for main auditorium ceiling (Make:
    Armstrong/Amg)
8      Providing & fixing of Gysum Ceiling on GI Frame
       including 3 coats of emulsion paint finish as per IS and
                                                                 50 Sqm
       as directed by the consultant (Make: India Gypsum /
       Lafarge)
9      Providing & fixing of black coloured acoustic wood
       wood wool tiles of size 600x600X20mm having a
       denisity of 400 Kg/M3 placed on a black powder
                                                                320 Sqm
       coated GI T grid framework as per tender drawings and
       as directed by the consultant for stage and wing area
       (Make: Aunotone / Fibrecrete)
10     Providing and laying of overdeck insulation on false
       ceiling using 50mm thick glass wool pads having a
       density of 24 Kg/M3 properly put in polythene bags and
       open ends folded, stapled and sealded with 50mm          970 Sq Mtr
       wide BOPP adhesive tape as directed by the consultant
       (Make: Up Twiga / Owens Cornings)


       Floor Treatment
11     Providing and Fixing of 100% bcf Polypropylene bulk
       continious filament yarn dyed carpet having pile
       height of 6mm including underlaymeny with 4mm Insu
       Shield FR grade cross linked closed cell material
       pasted on the floor with SR 988 adhesive. After llaying
       the carpet all the steps edges will be finished/protected 715   Sqm
       with stair edging strips duly screwed to the floor
       concrete using pvc inserts and metal screws. The
       carpet shade and design will be approved by the
       consultant before supply. (Make: Unitex or approved
       equal)
                                                                                          Total Amount of D =

     In Words = (Rupees__________________________________________________________________________________________) only
                                               5. BILL OF QUANTITIES (BOQ) FOR STAGE FURNISHING - E

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.               Tender Amount for Stage Furnishing = Rs.2486880.00p
                                                                                       Rate
Sl No                  Description                    Qty    Unit                                                                Amount
                                                                     In figures             In Words
  1     Providing and fixing of Stage resilent
        wooden flooring using 100x18mm
        steam beech wood planks with tounge &
        groove joints. Steam beech planks to be
        of minimum 1200mm. Having two layers
        of marine ply. Neoprene rubber pads &
        3mm MS plate as support. The frame to
        be filled with 50mm 800GSM mikron.            250   Sq Mtr
        Stage edging to be provided using 100 X
        35mm steam beech wood. The flooring
        will be finally finished with melamine
        water proof polish as directed by the
        consultant.


  2     Providing and fixing of Masking Legs &
        Borders made of 40x25mm metal
        framework faced with black coloured fire
        retardant fabric as facing backed with
        foam & 6mm thick commercial water
        proof plywood and suitabley hung from         12    each
        the top; the fabic should cover both sides
        of the mask with foam on both side, and
        as directed by the consultant.



  3     Providing and fixing of valance made out
        of velvet cloth in draping pattern suitably
        hung from MS pipe as per the design            1    each
        details and as directed by the consultant.
4   Providing and fixing of cyclorama for the
    stage with PVC cyce clot & MS frame
    which can also be used as a projection
    screen and with provison of adding          1   each
    multiple scenes as per design and as
    directed by the consultant
5   Providing and fixing of biparting
    motorised Main Curtain made out of
    velvet cloth with horizontal sliding
                                                1   each
    arrangement (size 11400 X 5500) as per
    design and as directed by the consultant

6   Providing and fixing of Rear biparting
    motorised Main Curtain made out of
    glazed cotton black colour cloth with
    horizontal sliding arrangement (size        1   each
    11400 X 5500) as per design and as
    directed by the consultant
                                                                                              Total Amount of E =

        In Words = (Rupees__________________________________________________________________________________________) only
                                                   6. BILL OF QUANTITIES (BOQ) FOR ELECTRICAL - F

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                         Tender Amount for Electrical = Rs.4732824.58p
                                                                                              Rate
Sl No                      Description                        Qty         Unit                                                      Amount
                                                                                 In figures      In Words
        RE- WIRING IN STEEL/PVC CONDUIT
  1     Wiring in existing conduit: Supplying and
        drawing following sizes of FR PVC insulated
        copper conductor, single core cable in the existing
        surface / recessed steel / PVC conduit as
        required.
  1.1   3 x 1.5 sq.mm                                         2500    Metre
  1.2   2x 6 sq.mm + 1 x 2.5 sq.mm                             200    Metre
   2    Telephone wiring in existing conduit: Supplying
        and drawing following pair, 0.5 sq.mm FR PVC
        insulated copper conductor, unarmoured
        telephone cable in the existing surface/ recessed
        steel/ PVC conduit as required.

  2.1   2 Pair                                                 50     Metre
   3    S/F PVC conduit: Supplying and fixing of
        following sizes of PVC conduit along with
        accessories in surface/recess including cutting
        the wall and making good the same in case of
        recessed conduit as required.
  3.1   20 mm                                                 500     Metre
  3.2   25 mm                                                 800     Metre
  3.3   32 mm                                                 200     Metre
        SWITCHES & ACCESSORIES
  4     S/F moduler type switch/socket: Supplying and
        fixing following moduler switch / socket on the
        existing moduler plate & switch box including
        connections but excluding moduler plate etc. as
        required.
  4.1   5/6 amps switch                                       353     Each
  4.2   3 pin 5/6 amp socket outlet                           24      Each
5     S/F moduler type electronic fan regulator:
      Supplying and fixing stepped type electronic
      fanregulator on the existing moduler plate switch     52    Each
      box including connections but excluding moduler
      plate etc. as required.
6     S/F moduler type blanking plate: Supplying and
      fixing moduler blanking plate on the existing
                                                            100   Each
      moduler plate & switch box excluding moduler
      plate as required.
7     S/F moduler boxes,base & cover plate: Supplying
      and fixing following size/ modules, GI box along
      with moduler base & cover plate for moduler
      switches in recess etc. as required.

7.1   1 or 2 Module (75mmx75mm)                              2    Each
7.2   4 Module (125mmx75mm)                                  6    Each
7.3   6 Module (200mmx75mm)                                 13    Each
7.4   8 Module (125mmx125mm)                                15    Each
7.5   12 Module (200mmx150mm)                               28    Each
 8    S/F power plug point moduler type
      accessories: Supplying and fixing suitable size
      GI box with moduler plate and cover in front on
      surface or in recess including providing and fixing
                                                             2    Each
      6 pin 15/16 & 5/6 amps moduler socket outlet
      and 15/16 amps moduler switch connection,
      painting etc. as required.

9     S/F ceiling rose: Supplying and fixing 3 pin 5
      amp. Ceiling rose on the existing junction box /
                                                            52    Each
      wooden block including connection etc as
      required.
      MCB DISTRIBUTION BOARDS
10    S/F SP MCB DB: Supplying and fixing following
      way, single pole and neutral, sheet steel, MCB
      distribution board, 240 volts, on surface/recess,
      complete with tinned copper busbar, neutral
      busbar, earth bar, din bar, detachable gland plate,
      interconnections, phosphatized and powder
      painted including earthing etc. as required. ( But
      without MCB/RCCB/Isolator)

10.1 12 way, double door                                    3   Each
 11 S/F pre-wired TP MCB DB: Supplying and fixing
     following way, three pole and neutral pre-wired,
     sheet steel, MCB distribution board, 415 volts, on
     surface/recess, complete with loose wire box,
     turminal blocks duly pre-wired suitable size FR
     PVC insulated copper conductor upto terminal
     blocks, tinned copper busber, neutralic,earth bar,
     din bar, detachable gland plate, interconnections,
     phosphatized and powder painted including
     earthing etc. as required. ( But without
     MCB/RCCB/Isolator)
11.1 4 way(4+12), double door                               5   Each
 12 S/F vertical type TP MCB DB: Supplying,
     installation, testing & commossioning of surface /
     recess mounting, vertical type 415 volts, TPN
     MCBDB of sheet steel, dust protected duly,
     phosthatized & powder painted , inclusive of 200A
     AMPS tinned copper busbar, common neutral
     link,earth bar, din bar for mounting MCB's
     detachable gland/knock out plate, and with 100
     amps, 10 ka MCCB as incomer interconnection
     between incomer MCCB abd busbars of following
     ways (but without MCB's) as required.

12.1 4 Way qith 100 amps MCCB as incomer                    2   Each
13    S/F 'B' series, SP MCB: Supplying and fixing 5
      amps to 32 amps, rating, 240 volts, 'b' series,
      miniature circuit breaker suitable for lighting and
      other loads of following poles in the existing MCB
      DB complete with connections, testing and
      commissioning etc. as required.

13.1 Single Pole                                             50   Each
 14 S/F TP MCB Isolator: Supplying and fixing
     following rating three pole, 415 volts, isolator in
     the existing MCB DB complete with connections,
     testing and commissioning etc. as required

14.1 63 amps                                                 6    Each
 15 S/F TPN RCCB: Supplying and fixing following
     rating four pole, (three phase & neutral), 415 volts,
     residual current circuit breaker ( RCCB), having a
     sensitivity curent upto 300 milliampers in the
     existing MCB DB complete with connections,
     testing & commissioning etc as required.

15.1 25 amps                                                 8    Each

      EARTHING AND LIGHTENING PROTECTION

16    G.I. earth pipe electrode with salt / charcoal:
      Earthing with G.I. earth pipe 4.5 mtr long, 40mm
      dia encluding accessories, and providing
                                                             10   Set
      masonary enclosure with cover plate having
      locking arrangement and watering pipe etc. with
      charcoal and salt as required.
17    G.I. earth plate electrode: Earthing with G.I.
      earth plate 600mm X 600mm X 6mm thick
      including accessories, and providing masonary
                                                             8    Set
      enclosure with cover plate having locking
      arrangement and watering pipe etc. with charcoal
      and salt as required.
18   Copper earth plate electrode: Earthing with
     copper earth plate 600mm X 600mm X 3mm thick
     including accessories, and providing masonary
                                                           3     Set
     enclosure with cover plate having locking
     arrangement and watering pipe etc. with charcoal
     and salt as required.
19   S/L 6 SWG GI wire in ground: Suplying and
     laying 6 SWG G.I. wire at 0.50 meter below
                                                          100   Meter
     ground level for conductor earth electrode,
     including soldering etc. as required
20   S/L 25mm X 5mm GI earth strip in ground:
     Suplying and laying 25mm X 5mm G.I. earth strip
     at 0.50 meter below ground level for conductor       50    Meter
     earth electrode, including soldering etc. as
     required
21   S/L 25mm X 5mm Copper earth strip in pipe:
     Suplying and laying 25mm X 5mm Copper earth
                                                          50    Meter
     strip in 40mm dia G.I. pipe from earth electrode
     as required
22   P/F 6 SWG GI loop earthing wire in
     surface/recess: Providing and fixing 6 SWG G.I.
                                                          200   Meter
     wire on surface or in recess for loop earthing as
     required
23   P/F 25mm X 5mm GI earth strip in
     surface/recess: Providing and fixing 25mm X
                                                          20    Meter
     5mm GI earth strip on surface or in recess for
     connections etc. as required
24   P/F 25mm X 5mm copper earth strip in
     surface/recess: Providing and fixing 25mm X
                                                          20    Meter
     5mm copper earth strip on surface or in recess for
     connections etc. as required
25   P/F GI lightning conductor finial: Providing and
     fixing of lightning conductor finial, made of 25mm
     dia 300mm long, G.I. tube, having single prong at
                                                          10    each
     top, with 85mm dia 6mm thick G.I. base plate
     including holes etc. as required.
26     P/F GI lightning conductor tape: Providning and
       fixing G.I. tape 20mm X 3 mm thick on parapet or
       wurface wall for lightning conductor complete as           100   Meter
       required and finally conecting to GI earth pits

       Armoured Cable
27     S/L of XLPE Aluminium Armoured Cable:
       Supply and laying of PVC insulated XLPE power
       cable of 1.1 KV grade of following size in ground
       including excavation, sand cushioning, protective
       covering and refilling / cable tray / electrical ducts /
       under floor etc. complete in all respects including
       end termination including all accessories like
       glands/lugs, etc.

27.1   4C X 6 Sqmm Cu. Ar. Cable                                  700   Rmt
27.2   3.5C X 35 Sqmm Al. Ar. Cable                               200   Rmt
27.3   3.5C X 150 Sqmm Al. Ar. Cable                              30    Rmt
27.4   3.5C X 185 Sqmm Al. Ar. Cable                              120   Rmt
       POLE ERECTION
28     S/E of 50mm Dia GI Pole for Outdoor Lighting:
       Supply and erection of 50mm dia B Class Gi Pipe
       of 4 Mtr Lenghth in Cement concrete 1:3:6 (1
       cement: 3 coarse sand: 6 graded stone aggregate            13    Each
       40mm nominal size) foundation as per drawings
       and as directed by the consultant

     LIGHT FITTINGS
29   S/I of Light Fittings: Supply, installation, testing
     and commissioning of following Prewired light
     fittings complete with all accessories including
     light tube, etc as per drawings as specified by the
     consultant
29.1 Down Light ( Phillips FBH 150/218 or approved
                                                                  38    Each
     eq)
29.2 Spot Light ( Phillips MCN 810/070 or approved
                                                                  12    Each
     eq)
 29.3 Ceiling Mounted Light ( Phillips FCS 518/211 or
                                                           64    Each
      approved eq)
 29.4 Havells Prisma 1 / 60 W GLS or approved eq           18    Each
 29.5 Recessed Mounted T5 Tube Light (TBS288 2 X
                                                           113   Each
      TL5 - 28W HF G2 BL IN) or approved eq)
 29.6 Garden Light (Phillips SPC/101/70 (E) HPF or
                                                           13    Each
      approved eq)
 29.7 Flood Light (Phillips SNF 114 250W NB or
                                                            3    Each
      approved eq)
 29.8 Bracket Light ( Phillips FL 800/320 NrG or
                                                            5    Each
      approved eq)
29.10 Surface Mounted T5 Tube Light (TPH 824/228 D8
                                                           60    Each
      DI HF) or approved eq)
      FANS
  30 S/I of Fans: Supply, installation, testing and
      commissioning of following Fans/Exhaust Fans
      including all accessories, consumables and
      necessary civil work if required complete in all
      respect as per drawings as specified by the
      consultant
 30.1 1200mm sweep Ceiling Fan                             52    Each
 30.2 250mm exhaust fan                                    31    Each
      MAIN ELECTRICAL PANEL
  31
      Supply, installation, testing and commissioning of
      M.V. cubicle type totally enclosed free standing
      type, dust, damp and vermin proof extendable,
      Main LT Panel complete with busbars, M.V.             1    Each
      danger notice plate, ammeter, ammeter selsctor
      switch, voltmeter, asp per specification & Drawing
      (The panel must be fabricated by a CPRI
      approved manufactuer only)
      DG SET
32   Supplying, installation, erection, testing, and
     commissioning of DG SET with rated capacity of
     200KVA at 0.8 P.F., including AMF Panel, silent
                                                           1   Each
     canopy, engine, alternator complete in all respects
     as required and as directed by the consultant
     (Make: Jackson, Kirloskar)
                                                                                                 Total Amount of F =


        In Words = (Rupees__________________________________________________________________________________________) only
                                                          7. BILL OF QUANTITIES (BOQ) FOR FIRE - G

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                                   Tender Amount for Fire = Rs.2662685.52p
                                                                                                     Rate
Sl No                          Description                             Qty   Unit                                                      Amount
                                                                                    In figures           In Words
        FIRE HYDRANT SYSTEM & ALARM SYSTEM

  1     SITC of Main Fire Pumps: Supply and fixing horizontal
        single / multistage pumping set with CI body, bronze
        impeller, Stainless Steel Shaft , Shaft Sleeve & nuts as per
        AISI-410 with mechanical seal and connected by a flexible
        coupling to a totally enclosed fan cooled induction motor
        mounted on common structural base plate with all pump
        accessories complete as per specifications vibration
        eliminators of approveal make. Motor to be suitable for 415
        volts, 3 phase, 50 Hz. A/C supply including pump rcc
        foundation and complete in all respect. (Make: Kisloskar)



  A)    MAIN PUMP                                                       1    Each
        Type of Pump     - Centrifugal end suction type
        Capacity       - 2850 LPM
        Head           - 50 Mtr
        Motor Capacity - As required
        Motor Type      - TEFC, 2950 RPM, 3 Ph, 415 V, 50 Hz
        Reqd. Accessories - Base Frame, Coupling, Coupling
        Guard, AVM Pads, Mechanical Seal, delivery and suction
        bellows
        Note: The Pump, Motor & all accessories must be
        assembled on the base frame by the pump manufacturer
        directly



  B)    JOCKY PUMP                                                      1    Each
        Type of Pump     - Centrifugal end suction type
     Capacity       - 180 LPM
     Head           - 50 Mtr
     Motor Capacity - As Required
     Motor Type      - TEFC, 2950 RPM, 3 Ph, 415 V, 50 Hz
     Reqd. Accessories - Base Frame, Coupling, Coupling
     Guard, AVM Pads, Mechanical Seal, delivery and suction
     bellows
     Note: The Pump, Motor & all accessories must be
     assembled on the base frame by the pump manufacturer
     directly

C)   ELECTRICAL STARTER AND CONTROL PANEL FOR
     ABOVE INCLUDING PRESSURE SWITCHES, TANK                          1     Each
     LEVEL SWITCHES REQUIRED

     Note: all pump selected and sld / ga of panel has to be
     approved by the consultant before procurement of material
     by the contractor



2    Supply and fixing of Mild Steel black pipes (IS:1239 Part- I
     heavy class) including cutting, welding/threaded joint and
     all fittings viz. flanges, bends, tees, elbows, reducers,
     clamps, hangers, structural supports, concrete anchor
     blocks, nuts and bolts, gasket etc. Also cutting holes/chasing
     in brick or RCC walls/slabs and making good complete,
     painting with one coat of primer (red oxide) and two or more
     coat of synthetic enamel paint to give an even shade of
     approved shade (Make: Jindal / Nezone)

a)   20 mm                                                            38   Metre
b)   25 mm                                                            25   Metre
c)   32 mm                                                            15   Metre
d)   40 mm                                                            14   Metre
e)   50 mm                                                         13   Metre
f)   65 mm                                                         18   Metre
g)   80 mm                                                         22   Metre
h)   100 mm                                                        32   Metre

3    Supply and fixing cast iron double flanged horizontal type
     non-return valve PN-1.0 (as per IS:5312) including nuts,
     bolts, 1.5 mm thick CAF gasket sheets complete in all
     respects. (Make: Audco / Castle / Kartar / BIR)


a)   100 mm                                                        1    Each
b)   150 mm                                                        2    Each

4    Supply and fixing pressure gauge dial size 100mm, range
     0-10 kg/Cm sq. complete with chrome plated isolation valve    3     Each
     and syphon. (Make: H Guru / Feibig)

5    Supply and fixing cast iron butterfly valve as per IS:13095
     (PN:1.0) including nuts, bolts, 1.5 mm thick CAF gasket
     sheets complete in all respect. (Make: Audco / Castle /
     Kartar / BIR)

a)   100 mm                                                        3    Each
b)   150 mm                                                        2     Each

6    Supply and fixing GM stop valve ISI marked (IS:778)
     screws type tested to 30 kg/sq. cm pressure of following
     size: (Make: Zolloto / BIR)

a)   25 mm                                                         5     Each
7    Supply and fixing gun metal two way collecting head with
     63 mm dia instantaneous type inlet with built in check valve
                                                                      1    Each
     for fire brigade connection to underground tank (Make: Vijay
     Fire, Minimax, Newage)

8    Supply and fixing cast iron flanged foot valve with nuts,
     bolts 1.5mm thick CAF gasket complete with all accessories
     as per IS :4038 . (Make: Kalpana/ Kirloskar)

a)   150 mm                                                           1    Each
b)   100 mm                                                           1    Each

9    Supply and fixing black steel pipe to IS:1239 (Heavy
     Class) including all fittings like anchor fastners, couplings,
     bends, elbows, tees, flanges, gasket etc. Welding as
     required painting with coat of solvent based primer and
     wrapping with 5 layered corrosion protection tape (2mm
     thick with 50% overlapping to get a final thickness of 4mm
     on the surface of pipe) coat tar based conforming to
     IS:10221 including necessary earth excavation and refilling,
     masonary supports complete in all respect. (For under
     ground piping). The rates quoted shall be inclusive of all
     structural supports, clamps & concrete anchor blocks.(Make:
     Jindal / Nezone)

a)   150 mm                                                           60   Meter

10   Supply and fixing of gunmetal, ISI marked oblique pattern
     fire hydrant landing valve with 80mm dia flanged inlet and
     63mm dia instantaneous type femal type lug and all
     accessories type femal type lug and all acccessories as per
     IS:290-1983      'Type-A'     with     hydrant       matching
     flanges,gaskets, nuts and bolts etc. complete in all recpects.
     (Make: Vijay Fire, Minimax, Newage)
a)   Single headed                                                    5    Each
11   Supply and fixing 63mm dia X 23 Mtr. long RRL hose
     including gunmetal male and female instantaneous type
     coupling (IS:903), machine wound with copper wire
     complete in all respects with ISI certification.
a)   RRL Hose pipe                                                 5    Each

12   Supply and fixing of gun metal 63 mm dia short branch
     pipe with 20mm dia nozzle, ISI marked (IS:903). (Make:        5    Each
     Vijay Fire, Minimax, Newage)

13   Supply and fixing of fire hose cabinet of size 650 x 450 x
     250 approx. fabricated from 16 gauge MS sheet of fully
     welded construction with hinged double front door with
     locking arrangements and partially glazed with 5mm thick
     glass, duly powder coated fire red finish with fire hose
     written on front suitable to house 1x23 M hose pipe with      5    Each
     couplings. The width and height to depend upon the actual
     size of the fire shaft available. Contractor to make shop
     drawings and get it approved by Engineer-in-
     Charge/Consultant before fabrication.

14   Supply and fixing first aid fire hose reel drum wall
     mounting swinging type fitted with 30 mtrs. 20 mm dia
     highpressure rubber hose confirming to IS:5132 with 5mm       5    Each
     outlet gunmetal nozzle with shut off valve (IS:884). (Make:
     Vijay Fire, Minimax, Newage)

15   Supply, fixing, testing and commissioning of 15 mm dia
     Pendent type sprinkler set to operate at 68 Deg. C (Make:     42   Each
     Tyco / HD)
16   Supplying, installing, testing and commissioning of
     Microprocessor based main 10 Zone Fire Alarm Control
     Panel with LCD Display, Hooter activation, Autodialler etc.
                                                                   1    Each
     Builtin Battery charger and Batteries etc. complete in all
     respects for running and operation. (Make: Honeywell /
     Morley / Agni)

17   Supplying, installing, testing and commissioning of Optical
     Smoke Detectors. (Make: Honeywell / Morley / Apollo)          49   Each


18   Supplying, installing, testing and commissioning of Beam
     Detectors. (Make: Honeywell / Morley / Apollo)                6    Each


19   Supplying, installing, testing and commissioning of Manual
                                                                   10   Each
     Call Point. (Make: Honeywell /Morley / Apollo)

20   Supplying, installing, testing and commissioning of Hooter.
                                                                   10   Each
     (Make: Honeywell /Morley / Apollo)

21   Supplying, installing, testing and commissioning of cabling
     for Fire Detection and Alarm system with 2 cores of 1.5
                                                                 800    Mtrs.
     sq.mm FRLS PVC insulated wire in existing conduit. (Make:
     RR Kabel / Finolex)

22   Supplying and fixing 20 mm dia PVC conduit 2 mm thick
     ISI marked in recessed/surface for extension of existing
     conduit complete with bends junction boxes, including 800          Mtrs.
     cutting chases in the walls and making good the same as
     requied. ( Make: Approved ISI makes)

    Supplying and fixing of Fire Extinguishers of ISI marked
    Makes duly installated and commissioned as directed by the
 23 consultant as per following ( Make: Minimax / Omex)
a)   5 Kg ABC Type Fire Extinguisher                    15     Nos
b)   4.5 Kg CO2 Type Fire Extinguisher                  6      Nos
c)   9 Kg AFFF type Fire Extinguisher                   4      Nos
d)   2 Kg Modular Fire Extinguisher                     2      Nos
                                                                                                  Total Amount of G =

        In Words = (Rupees__________________________________________________________________________________________) only
                                                     8. BILL OF QUANTITIES (BOQ) FOR HVAC - H

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                         Tender Amount for HVAC = Rs.5433912.00p
                                                                                         Rate
 Sl No                  Description                   Qty       Unit                                                          Amount
                                                                          In figures         In Words
    1     SITC of 22 Tr nominal capacity floor
          mounted packaged airconditioners
          having multiple scroll compressor,
          microprocessor control including
          centrifugual evaporator fan driven by
          TEFC motor, all refrigerant control
                                                       4        Nos
          including thermostatic expansion valve,
          air cooled condensers with propellor
          type fans, all electrical controls,
          complete in all respect (Make: Bluestar,
          Voltas, Carrier) including the following
          work:
          a) Refrgerant copper piping between
          indoor unit & outdoor unit properly
          supported by GI Cable Tray with anti
          vibration nitrile media between pipes
          and tray
          b) Electrical interconnection between
          IDU & ODU using armoured cables on
          GI Cable Tray
          c) Electrical power cable from local
          disconnect panel (located in AHU room)
          to equipment using armoured cable on
          GI cable tray
          d) Nitrogen pressure testing &
          vaccumising of refigerant circuit
          e) Regrigerant Gas Charging
          f) Fire Retardant Canvas connection with
          Ducts including Duct Damper
          g) Suitable anti vibration Pads for all
          indoor and outdoor units
          h) MS structure for mounting equipments
      i) Provision for fresh air addition using GI
      ducts, cowl, bird screen and duct
      damper for volume control

2     Supply, Fabrication & Fixing of GI
      Ducting as per IS653 including all
      accessories like duct support material,
      nitrile rubber gasket for flanges, MS
      Flange, MS Rod, GI nut bolt, washer, j
      hook, GP Sheet, complete in all respect
      as per drawing (Make: Tata, Nippon,
      Sail)
2.1   0.8 mm thick                                   400   Sq Mtr
2.2   0.6 mm thick                                   350   Sq Mtr

3     Supply & Fixing of Duct Thermal
      Insulation using 50mm thick Alum.
      Foil faced Fiber Glass Wool having a
      density of 24 Kg/M3 using CPRX
      compoud as adhesive and using a good
      quality BOPP tape, and straping roll tied
                                                     750   Sq Mtr
      at 1.2 mtr intervals in the entire duct
      (including where accoustic insulation is
      also being done) complete in all respect
      as per drawing (Make: Twiga, Owens
      Corning)



4     Supply & Fixing of Duct Accoustic
      Insulation using 25mm thick Resin
      bonded Fiber Glass rigid board having a
      density of 48 Kg/M3, F.B. Tissue Paper,
      28G Perforated fixed using GI Nut, Bolt,       80    Sq Mtr
      washer at 150mm grid arrangement in
      all plenums and first 5 Mtr of all ducts
      complete in all respect as per drawing
5   Supply & Fixing of Wall Accoustic
    Insulation lining on inside walls of
    AHU Rooms and Return Air Shaft Wall
    (from bottom to top) using 50mm thick
    Resin bonded Fiber Glass rigid board
    having a density of 48 Kg/M3, F.B.
                                               250   Sq Mtr
    Tissue Paper, 28G Perforated fixed on a
    900 X 600 GI channel grid using metal
    scew and washer complete in all respect
    as per drawing (Make: Twiga, Owens
    Corning)



6   Supply & Fixing of Aluminium powder
    coated Grills, Diffusers including Alum.
    Collar Dampers complete in all respect
                                               15    Sq Mtr
    as per drawing (Make: Airflow, Caryaire,
    Ravistar)


7   Supply & Fixing of Motorised Fire
    Damper having duct mounted multiple
    criteria fire sensor wired and
    commissioned to shut off the AC in the
                                                3    Sq Mtr
    event of sensing any fire and raising an
    audio alarm complete in all respect as
    per drawing (Make: Airflow, Caryaire,
    Ravistar)

8   Supply & Fixing of Condensate Drain
    Water Piping using CPC 32mm dia Pipe
    and fittings terminated to nearest drain
                                                1     Lot
    point complete in all respect as per
    drawing (Make: Supreme, Aashirwad)
9    SITC of 1.5 Tr nominal capacity Hiwall
     Split Airconditioners (3 Star Rated
     minimum) FOR GREEN ROOMS
     having rotary compressor,
     microprocessor control including direct
     driven evaporator fan, all refrigerant
     control including capillary tube, air        2   Nos
     cooled condensers with propellor type
     fans, all electrical controls, including a
     wall mounted voltage stabiliser, starter
     etc complete in all respect (Make:
     Bluestar, Voltas, Carrier)



10   SITC of 3.5 Tr nominal capacity Hiwall
     Split Airconditioners FOR Exhibition
     Space having scroll compressor,
     microprocessor control including direct
     driven evaporator fan, all refrigerant
     control including capillary tube, air
                                                  4   Nos
     cooled condensers with propellor type
     fans, all electrical controls, including a
     wall mounted voltage stabiliser, starter
     etc complete in all respect (Make:
     Bluestar, Voltas, Carrier)


                                                                                           Total Amount of H =


     In Words = (Rupees__________________________________________________________________________________________) only
                                                9. BILL OF QUANTITIES (BOQ) FOR STAGE LIGHTING - I

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                     Tender Amount for Stage Lighting = Rs.4071804.00p
                                                                                            Rate
Sl No                     Description                       Qty     Unit                                                           Amount
                                                                           In figures            In Words
  1     Supply & fixing of 1000 W Halogen profile light
        consisting of 2 nos. 150mm dia PC lenses,
        imported     sockets,   ellipsoidal  anodised
        alluminium reflector, 1000W halogen BipinT-11       11       nos
        lamp, yoke colour frame & suitable clamp as
        approved by the consultant

  2     Supply & fixing of 2000W Planoconvex Spot
        Light complete with 2000W Halogen Bipin CP-
        41 lamp, spherical anodised reflector, 200 mm
                                                            2        nos
        dia Planoconvex lens, rear sliding knob, yoke,
        colour frame & suitable clamp as approved by
        the consultant
  3     Supply & fixing of 1000W Halogen Fresnel light
        consisting of1000W Halogen Bipin T-11 lamp,
        150mm dia imported fresenel lens, Imported
                                                            26       nos
        socket, bottom sliding knob, yoke, colour frame &
        suitable clamp. as approved by the consultant

  4     Supply & fixing of 1000 W Halogen light with
        mash & barndoor        consisting of 2nos. single
        contact compressible holders, yoke, 1000W           11       nos
        halogen tube & suitable clamp

  5     Supply & fixing of 1000W Halogen Planoconvex
        spot light complete with1000 W Halogen Bipin T-
        11lamp, spherical anodised reflector, imported
        socket, 150mm dia planoconvex lens, bottom          6        nos
        sliding knob, yoke, colour frame & suitable clamp
6   Supply & fixing of 1000W, 240 Volt, PAR
    Sealed Beam Light with CRC Sheet Metal and
    alluminium die casting, mat black color, yoke &      28    nos
    clamp Type: Modern-64 as approved by the
    consultant
7   Supply & fixing of 500W Halogen Cyclorama
    Flood Lights with 500W Halogen tubes.
    Alluminium       anodised      reflector,    2nos
                                                         12    nos
    compressible recessed single contact holders,
    colour frame & suitable clamp as approved by
    the consultant
8   Supply & Fabrication of M.S. Ladders / Cat
    Walk / other necessary support structures etc
    for the stage area as directed by the consultant
    including all material, labour, consumables
                                                        5000   Kg
    including, Gas, welding rod, primer and
    synthectic paint etc. complete in all respect as
    directed by the consultant as approved by the
    consultant
9   Supply & fixing of Floor mounted dimmer rack
    with 48 nos single phase 4 KW electronic
    dimmers to be distributed in 3 phases with
    suitable bus bar arrangement housed in sheet
    metal enclosure.0-10 volt analogue output, blown     1     nos
    fuse indicator, output light indicator, preheater
    switch for filament heating, local controls as
    approved by the consultant
10   Supply & fixing of Cross connecting panel 148
     x 148 way having 148 nos. 4mm sheathed
     sockets fitted on the panel for interchanging the
     light circuits with the dimmers as desired. The
     connection can be made with patchcords having
                                                            1    nos
     4mm sheathed banana plugs at both the ends
     with 1 mtr. Super flexible cable of 40 SWG. The
     patch panel has neutral & earth bar connection
     strip as approved by the consultant

11   Supply & fixing of 48 Channel Control panel (
     96 in wide mode) consisting of 24 sub masters,
     in 9 pages manual controls with 2 sub masters,
     1 master fader , blinker switches, effects control,
     DMX output and soft patch to 512 DMX
                                                            1    nos
     channels, 400 memories, LCD menus , Floppy
     disk drive, HTP control, Provision for Controlling
     24 intelligent lights etc…as approved by the
     consultant

12   50mm dia B class GI pipe to be hung from
     existing grid or roof structure for side wings,       120   mtr
     lighting bars.as approved by the consultant
13   Supply & fixing of Manual winch operated
     suspension sets 350 Kg capacity 5 lines with
     12m/10m barrel, 5 line blocks winch unit with
     handle and rachet, clutch plate and steel wire
                                                            6    nos
     rope.(4 winches for stage lighting bar, 2 winches
     for microphones and scenarios) winch mounting
     etc.. as approved by the consultant

15   Supply & fixing of Aritic Lighting elements in
     the auditorium using various types of LED              1    Job
     lighting as directed by the consultant
16   Supply, laying and termination of suitably sized
     Electrical Cables including all accessories
     including GI Cable tray for all the above          1   Lot
     equipments as directed by the consultant

17   Supply and installation of suitable electrical
     power distribution panel as directed by the
     consultant (Note: This panel will also provide
     power & control for all auditorium lights with     1   Nos
     dimmers / provide necessary power for audio &
     video / provide power for other auxiliary power
     requirements)
                                                                                                   Total Amount of I =

        In Words = (Rupees__________________________________________________________________________________________) only
                                               10. BILL OF QUANTITIES (BOQ) FOR AUDI SEATING - J

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                  Tender Amount for Audi Seating = Rs.5940000.00p
 Sl                                                                                      Rate
                       Description                      Qty Unit                                                              Amount
No                                                                      In figures            In Words
 1   Supply & Fixing of Push Back Auditorium Chairs
     suitable for instalng in 900mm tread, made as per Fire
     Safety Norms and Standards, with maximum lumbar
     support for fatigue free healthy seating, engineered for
     ergonomic shape, environment friendly with no wood
     used & CFC free, having 25mm x 5mm MS Flatmade
     back inner frame with 3 serpentine springs, PPCP
     Plastic molded one-piece inner seat frame, Molded
     Polyurethane foam cushioned seat back, Uphoistered
     with Flame Retardant Fabric with Scothgard for Stain
     Resistance, Zipper attached to seat back fabric for easy
     removability, epoxy powder coated paint for all steel    1000   Nos
     parts, Integrated skin type PU foam made arm rest
     without cup holder, Maintenance free Synchornized
     Push back system, with seamless seat supporting tray,
     Heavy gauge CRC Sheet made side stand covered with
     fabric - 4.5 Kg, Back side of the back covered with
     PPCP Plastic back cover, Chairs installed to the floor
     with expanded anchor fasteners including accessories
     like Seat number, Gangways & Aisle light boxes etc
     complete is all respect as directed and in color shade
     approved by the consultant (Make: Monarch, Rana,
     Kundan)
                                                                                                     Total Amount of J =

       In Words = (Rupees__________________________________________________________________________________________) only
                                                          1. BILL OF QUANTITIES (BOQ) FOR CIVIL WORKS-A

Name of Work : Construction of 1000 Capacity Auditorium at MZU, Tanhril                              Tender Amount for Civil Works = Rs.64972416.86p
                                                                                                     Rate
SL.   SOR
                                    Particulars                        Qty      Unit                                                      Amount
No.    No                                                                              In figures           In words

 1    2.06 Earthwork in excavation over areas (exeeding 30cm in
           depth,1.5m in width as well as 10sqm on plan)
           including disposal of excavated earth, lead upto 50m
                                                                     10973.60   m3
           and lift upto 1.5m, disposed earth to be levelled and
           neatly dressed.
           a) Oridinary and Hard Soil

 2    2.07 Earthwork in excavation in foundation trenches or
           drains etc. (not exceeding 1.5m in width or 10sqm on
           plan) including dressing of sides and ramming of
           bottoms, lift upto 1.5m including getting out excavated   1829.90    m3
           soil and disposal of surplus excavated soil as directed
           within a lead of 50 metres.
            b) Hard Soil ( pick work ).

 3    4.07 Providing and laying cement concrete 1:4:8 (1 cement :
           4 coarse sand : 8 graded stone aggregate 40mm
           nominal size) excluding cost of centering and              76.90     m3
           shuttering in -
            a) All work upto foundation & plinth level.

 4    5.42 Providing and laying in position machine batched,
           machine mixed and machine vibrated design mix M-20
           grade reinforced cement concrete excluding cost of         162.33    m3
           centering and shuttering and reinforcement in -
            a) All work upto foundation & plinth level.
         b) Walls, columns, pillars, posts and struts upto floor
         two level or floor two below from the ground floor (as         351.78     m3
         indicated in the drawing).


         c) Beams, plinth beams, girders, bressumers,
         cantilevers, suspended floors, lintels, roofs, staircases,
         spiral staircases, shelves, etc. upto floor two level or       866.18     m3
         floor two below from the ground floor (as indicated in
         the drawing).


5   MR HYSD bars (Fe500) reinforcement for RCC work
       including straighthening, cutting, bending, placing in
                                                                       302794.52   kg
       position and binding all complete.


         Centering and shuttering including strutting, propping,
6   5.08 etc. and removal of form works in -
         a) Foundations, footings, bases of columns etc. for mass
         concrete.                                                      151.68     m2

         c) Columns, pillars, piers, abutments, posts and struts.
                                                                        2387.95    m2

         d) Lintels, beams, plinth beams, girders, bressumers
         and cantilevers, etc.                                          2795.83    m2

         e) Suspended floors, roofs, landings, shelves and their
         support, balconies and chajjaj, etc.                           2561.63    m2

         f) Staircases (except spiral staircase) excluding landings.
                                                                        727.75     m2
          k) Vertical and horizontal fins individually or forming
          box, louvres and bends, eaves boards.                       67.20    m2

7    2.18 Filling available excavated earth (excluding rock ) in
          trenches, plinth, etc. in layers not exceeding 20 cms in
          depth, consolidating each layer by ramming and             3906.90   m3
          watering and dressing lead upto 50 meters and lift upto
          1.50 meters.


8    7.06 Coursed masonry with rectangular sized hard stone in
          foundation upto one storey above and below ground          1321.38   m3
          level including curing, etc. complete.

          b) in cement mortar 1 : 4 ( 1cement : 4 fine sand)

9    6.05 Half brick masonry with first class brick in foundation
          upto one storey above and below ground level               3048.54   m2
          including curing, etc. complete.

          b) in cement mortar 1 : 4 ( 1 cement : 4 fine sand )

10   5.15 Providing and fixing MS fan clamp 12mm dia HYSD
          bar bent to shape with hooked endin RCC slabs during
          laying including painting the exposed portion of loop        30      Nos
          complete.


11   9.05 Providing Ist class teak wood dressed in frames of
          chaukhat for doors, windows, clerestory windows fixed
                                                                      3.28     m3
          in position.
12   14.01 Providing 40 x 5mm flat iron hold fast 40 cm long
           including fixing to frame with 10mm dia. bolts, nuts
           and wooden plugs and embeddings in cement concrete
                                                                         324     Nos
           block 30 x 10 x 15cm 1:3:6 mix (1 cement : 3 sand : 6 well
           graded stone aggregate 20 mm nominal size)


13   MR Providing and fixing 12mm thick toughened glass
        shutters for doors etc. includingnecessary hinges with
        necessary screws, etc. complete.                                14.07    m2




14   9.11 Providing and fixing 1st class local wood panelled
          shutters for doors etc. including M.S. butt hinges with
          necessary screws, etc. complete.                              60.17    m2




15   9.41 Providing and fixing 25mm thick marine ply flush door
          shutters, core of block board construction including
                                                                        36.23    m2
          M.S, butt hinges with necessary screws etc. complete .



16   9.61 Providing and fixing dressed & chamfered 1st class
          local wood door and window architrave of size fixed           497.40   m
          with wooden plug on door chaukhat etc complete.
           100mm X 30mm
17   14.28 Providing and fixing brass sliding door bolts (aldrops)
           bright finished with nuts and screws etc. complete.           48      Nos

           a) 300 x 16 mm
18   14.29 Providing and fixing brass tower bolts (socket bolts)
           bright finished with necessary screws etc. complete.       72      No

           a) 250 mm

19   14.32 Providing and fixing brass handles with necessary
           screws, etc. complete.                                    120      No

           a) 125 mm
20   MR Structural glazings as per specifications including

                                                                    467.54    m2

        necessary glass for full glazing
21   MR Providing and fixing anodised aluminium work for
        doors, windows, ventilators and partitions with
        extruded built up standard tubular and other sections
        of approved make conforming to IS: 733 and IS : 1285,
        anodised transparent or dyed to required shade
        according to IS : 1868. (Minimum anodic coating of
        grade AC 15), fixed with rawl plugs and screws or with
        fixing clips, or with expansion hold fastners including
        necessary filling up of gaps at junctions, at top, bottom   142.12    m2
        and sides with required PVC/neoprene felt etc.
        Aluminium sections shall be smooth, rust free, straight,
        mitred and jointed mechanically wherever required
        including cleat angle, Aluminium snap beading for
        glazing / paneling, C.P. brass / stainless steel screws,
        all complete as per architectural drawings and the
        directions of Engineer-in-charge. (Glazing and paneling
        included ) .
22   21.17 20mm cement plaster 1 : 4 (1 cement : 4 fine sand).
                                                                    1718.50   m2
23   21.13 15mm cement plaster 1 : 4 (1 cement : 4 fine sand).
                                                                     4445.78   m2

24   21.27 6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine
           sand).                                                    6085.21   m2

25   4.06 Providing and laying cement concrete 1:3:6 (1 cement :
          3 coarse sand : 6 graded stone aggregate 40mm
          nominal size) excluding cost of centering and              188.21    m3
          shuttering in - All works upto foundation and plinth
          level
26   12.31 Providing & laying Marbonite tiles 10.5mm thick of any
           shade laid on bed of 20mm thick cement mortar 1 : 4 in
           floors, treads of steps and landings jointed with neat
           cement slurry including finishing joints with grouting
           in white cement mixed with pigment of matching shade      1495.22   m2
           complete./including cutting where necessary finishing
           with flush pointing with Fix-A-tile (Choksey/ Sika/
           Pedelite/ Rout)/ Bal Endura with Bal Endura grout
           complete. a) Fixed with white cement
27   12.32 Marbonite tiles of thickness not less than 8mm thick of
           any shade in wall, skirting and risers of steps not
           exceeding 30cm in height, on 12mm thick cement
           plaster 1 : 3, including cutting where necessary           60.88    m2
           finishing with flush pointing with Fix-A-tile (Choksey/
           Sika/ Pedelite/ Rout) / Bal Endura with Bal endura
           grout complete. a) Fixed with white cement
28   12.35 Providing & laying Paver tiles of approves quality, size,
           shape and thickness not less than 8mm of approved
           brand of any shade laid on bed of 20mm thick cement
           mortar 1 : 4 in floors, treads of steps and landings
           jointed with neat cement slurry including finishing
           joints with grouting in white cement mixed with             71.36    m2
           pigment of matching shade complete.or/ including
           cutting where necessary finishing with flush pointing
           with Fix-A-tile (Choksey/ Sika/ Pedelite/ Rout)/ Bal
           Endura with Bal endura grout complete.         a) Fixed
           with white cement
29   12.43 White/coloured marble stone slab of size not less than
           1200mm x 600mm x 20mm thick and above in flooring,
           treads of steps and landings laid over 20mm (average)
                                                                       271.51   m2
           thick base of cement mortar 1:4 and jointed with white
           cement slurry including rubbing and polishing
           complete. d) Pearl Super white
30   12.44 White/coloured marble stone 20mm thick in skirting,
           riser of steps, dado, walls and pillars laid on 12mm
           (average) thick base of cement mortar 1:3 and jointed       44.71    m2
           with white cement slurry including rubbing and
           polishing complete. d) Pearl Super white
31   12.23 Ceramic tiles 7.1mm thick conforming to IS : 13753 in
           wall, skirting and risers of steps not exceeding 30cm in
           height, on 12mm thick cement plaster 1 : 3, jointed with
                                                                       445.80   m2
           neat cement cement slurry including pointing in white
           cement mixed with pigment of matching shade
           complete.       a) (ii) Plain 200 mm x 300 mm
32   26.04 Providing and fixing stone slab table rubbed and
           polished of size 105cmx60cm deep and 1.8 cm thick
           fixed in urinal partitions with cement concrete 1:2:4 (1
           cement : 2 coarse sand : 4 graded stone aggregate 6 mm          16.88    m2
           nominal size) and finished smooth. a) White Agaria
           Marble Stone


33   MR Supplying and fixing of Stainless Steel railing with
        necessary ballusters, railings etc as per detailed
        drawings                                                          138.20    rm


34   10.13 Providing and fixing M.S tubular section in built up
           section of truss welded in position including cutting,
           hoisting, fixing in position and applying priming coat         8772.25   kg
           with approved steel primer etc. complete.

35   16.37 Providing Trapezoidal Polyester Coated Galvanised
           Steel Sheets Roofing of any colour manufactured by
           DYNA ROOF of 1.06m width at all levels including
           fitting and fixing ridging with self drilling , self tapping   549.68    m2
           screws, EPDM washers etc. complete excluding the cost
           of purlin, rafter and trusses. ii) For 0.55mm thick :


36   16.38 Providing and fixing of Polyester Coated Galvanised
           Steel Sheets of any colour manufactured by DYNA
           ROOF ridges, gutters or valleys 50cm overall width
           0.50mm thick with 150 mm overlapping fixed with Self            22.30    rm
           Drilling & Tapping Screws with EPDM washer but
           excluding the cost of base frame. ii) 0.55 mm thick
37   15.48 Providing and fixing at all height false ceiling of
           12.5mm thick tapered edge gypsum board conforming
           to IS : 2095 including providing and fixing of frame
           work made of special sections power pressed from M.S.
           sheet and galvanised in accordance with zinc coating of
           grade 350 as per IS : 277 and consisting of angle cleats
           of size 25mm wide x 1.6mm thick with flanges of 22mm
           and 37mm at 1200mm centre to centre one flange fixed
           to the ceiling with dash fastner 12.5mm dia x 40mm
           long with 6mm dia bolts to the angle hangers of             2134.00   Sqm
           25x25x0.55mm of required length, and other end of
           angle hanger being fixed with nut and bolts to G.I.
           channels 45x15x0.9mm running at the rate of 1200mm
           centre to centre to which the ceiling section 0.5mm thick
           botton wedge of 80mm with tapered flanges of 26mm
           each having clips of 10.5mm at 450mm centre to centre
           shall be fixed in a direction perpendicular to G.I.
           channel with connecting clips made out of
           2.64mm dia x230mm long G.I. wire at every junction
           including fixing the gypsum board with ceiling section
           and perimeter channels 0.5mm thick 27mm high having
           flanges of 20mm and 30mm long, the perimeter of
           ceiling fixed to wall/partition with the help of rawl
           plugs at 450mm centre to centre with 25mm long drive-
           all screws @ 230mm interval including jointing and
           fixing to a flush finish of tapered and square edges of
           the gypsum board with recommended filler, paper
           tapes, finisher and two coats of primer suitable for
           gypsum board as per manufactures specification and
           also including the coat of making openings for light
           fittings, grills, diffusers, cutouts made with frame of
           perimeter channels suitably fixed all complete as per
           drawing and specification and direction of the Engineer-
           in- Charge but excluding the cost of painting.



38   20.44 Applying double coated cement slurry with water
           proofing chemical (latex or equivalent chemical) in
           proportion 1 : 4 : 5 ( 1 latex : 4 water : 5 cement )      720.78   m2
           including cleaning the treated surfaces with brushes
           etc.


39   20.46 Extra for providing and mixing water proofing
           chemical (latex or equivalent chemical) @ 2kg per bag
           of cement in - c) 15mm cement plaster 1 : 3 (1 cement :    720.78   m2
           3 fine sand).
40   20.44 Applying double coated cement slurry with water
           proofing chemical (latex or equivalent chemical) in
           proportion 1 : 4 : 5 ( 1 latex : 4 water : 5 cement )      720.78   m2
           including cleaning the treated surfaces with brushes
           etc.
41   20.34 Applying double coated Dr. FIXIT PROOFCOTE
           BLACK on the surface of cement concrete for
           prevention of water infiltration and dampness in water
                                                                       166.10   m2
           tanks,sunken slab,basement, terraces, etc. @ 0.55 Litre
           per sqm.

42   16.32 Providing and fixing on wall face unplasticised Rigid
           PVC rain water pipes conforming to IS : 13592 Type A
           including jointing with seal ring conforming to IS : 5382   283.50   m
           leaving 10 mm gap for thermal expansion.(i) Single
           socketed pipes :

43   16.33 Providing and fixing on wall face unplasticised - PVC
           moulded fittings/ accessories for unplasticised Rigid
           PVC rain water pipes conforming to IS : 13592 Type A
           including jointing with seal ring conforming to IS : 5382    42      No
           leaving 10 mm gap for thermal expansion.
           A Single pushfit Coupler : a) 110 mm

44   16.34 Providing and fixing unplasticised -PVC pipe clips of
           approved design to unplasticised - PVC rain water
           pipes by means of 50x50x50mm hard wood plugs,
           screwed with M.S. screws of required length including        126     No
           cutting brick work and fixing in cement mortar 1:4 (1
           cement : 4 coarse sand) and making good the wall etc.
           complete. b) 110 mm
45   16.35 Providing and fixing to the inlet mouth of rain water
           pipe cast iron grating 15 cm diameter and weighing not       21      No
           less than 440 grams.
46   26.01 Making plinth protection 50mm thick of cement
           concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
           aggregate 20 mm nominal size) over 75mm bed of dry
           brick ballast 40mm nominal size well rammed and             107.40   m2
           consolidated and grouted with fine sand including
           finishing the top smooth.
47    2.23 Diluting and injecting chemical emulsion for post
           constructional anti termite treatment with
           Chlorpyriphos/Lindane emulsifiable chemical 20%
           with 1% concentration.
           c) Treatment of soil under existing floor using chemical 1882.12     m2
           emulsion @ 1 litre per hole, 300mm apart including
           drilling 12mm diameter holes and plugging with
           cement mortar 1:2 (1 cement : 2 coarse sand) to match
           the existing floor
48   21.65 Applying one coat of distemper primer of approved
           brand and manufacture on wall surface.                   10530.99    m2

49   21.85 Distempering with 1st quality acrylic washable
           distemper of approved brand and manufacture and of
           required shade and colour to give an even shade on        10530.99   m2
           new work (two or more coats).

50   21.89 Finishing walls with water proofing cement paint of
           approved brand and manufacture and of required
           shade on new work (three or more coats) to give an even   1718.50    m2
           shade.

51   21.83 Applying priming coat with ready mixed primer of
           approved brand and manufacture on wood work and
                                                                      192.78    m2
           plywood complete. a) Ready mix white primer.

52   21.93 Painting with synthetic enamel paint of approved
           brand and manufacture in all shade on new work (two
                                                                      192.78    m2
           or more coats). a) General quality

53   21.100   Varnishing with copal varnish of approved brand and
              manufacture on new work (two or more coats) of glue
              sizing over an under coat of flatting varnish.          49.74     m2
54   17.03 Providing and fixing vitreous china water closet
           squatting pan ( Orissa type ) with 100mm SCI 'P"/'S'
           trap, of Parryware/ Hindware/ Cera and equivalent          29   nos
           make, including cutting and making good the walls
           and floors wherever required. b) Big ( 580 x440mm)
55   16.42 Providing and fixing vitreous china Urinal Flat Back
           Small 44 x 26.5 x 31.5cm size of Parryware/ Hindware/
           Cera and equivalent make with flush valve/spray with
           C.I or R.S brackets standard size of G.I flush pipe and
                                                                      15   nos
           C.P brass spreaders with brass unions and G.I clamps
           complete including painting of fittings and brackets,
           cutting and making good the walls and floors wherever
           required. i) White
56   17.62 Providing and fixing vitreous china low level flushing
           cistern of Parryware/Hindware/Cera and equivalent
                                                                      15   nos
           make with fittings such as lead valve less syphone, etc.
           and C.P. brass handle complete. i) White
57   17.74 Providing and fixing vitreous china wash basin
           compact of Parryware/ Hindware/ Cera and
           equivalent make with R.S. or C.I. brackets, 15mm C.P.
           brass pillar taps, C.P. brass chain with rubber plugs,
           32mm C.P. brass waste of standard pattern, 32mm C.P.       27   nos
           brass traps and union complete including painting of
           fittings and brackets, cutting and making good the
           walls wherever required. i) White (b) Compact wash
           basin of size 450x300mm without pillar tap.
58   17.90 Providing and fixing vitreous china tall pedestal of
           Parryware/ Hindware/ Cera and equivalent make for
                                                                      27   nos
           wash basin completely recessed at the back for the
           reception of pipes and fittings. i) White
59   17.119   Providing anf fixing 600x450mm bevelled edge mirror
              of superior glass (of approved quality) complete with
                                                                          27      nos
              6mm thick asbestos sheet ground fixed to wooden
              cleats with C.P. brass screws and washers.
60   17.123   Providing and fixing C.P. brass towel rail with two C.P.
              brass brackets to wooden cleats with C.P. brass screws.     27      nos
              b) 600x20mm size.
61   17.125   Providing and fixing toilet paper holder. b) C.P. brass
                                                                          29      nos
              toilet paper holder of standard size.
62   17.127   Providing and fixing chromium plated soap dish with
                                                                          29      nos
              brackets fixed to wooden cleats with brass screws.
63   17.128   Providing and fixing M.S holder bat clamps of
              approved design to sanitary / drainage pipe embedded
              in and including cement concrete block 10x10x10cm of
                                                                          116     nos
              1:2:4 mix (1cement : 2coarse sand : 4aggregate 20mm
              nominal size) including cost of cutting holes and
              making good the wall etc. complete. a) 100mm dia.
64   17.129   Providing and fixing sand cast iron (Spun) soil, waste
                                                                         458.00   rm
              and vent pipe. a) 100mm dia.
65   17.130   Providing and fixing sand cast iron bend of required
              degree with access door, insertion rubber washer 3 mm       332     nos
              thick, bolts and nuts complete. a) 100mm dia.
66   17.132   Providing and fixing sand cast iron heel rest sanitary
                                                                          15      nos
              bend. a) 100mm dia.
67   17.136   Providing and fixing sand cast iron single equal plain
                                                                          58      nos
              junction of required degree. a) 100x100x100mm.
68   17.143   Providing and fixing sand cast iron trap of self
              cleansing design with sand cast iron screwed down or
              hinged grating with or without vent arm complete           29       nos
              including cost of cutting and making good the walls
           and floors. a) 100 mm inlet and 100 mm outlet.
69   18.02 Providing and fixing on terrace (at all floor levels)
              Polyethylene storage tank of approved brand and
              manufacture with cover and mosquito proof coupling
                                                                       12000.00   ltrs
              and suitable locking arrangement and making
              nescessary connections for inlet, outlet and overflow
           pipes but without the cost for base support.
70   18.32 Providing and fixing CPVC pipes complete with CPVC
              fitting for water supply including clamps at one metre
              spacing, cutting and making good the walls etc.           313.00    rm
              (internal works) exposed on walls. a) 15mm dia.
           nominal bore
71   18.33 Extra for concealed in brick and RCC works by making
           chases upto 7.5x7.5cm in walls and making good the           313.00    rm
           same after housing pipes, etc. a) 15mm dia. nominal
           bore
72   18.34 Providing and fixing CPVC pipes complete with CPVC
              fitting for water supply, including trenching and         81.00     rm
           refilling etc. (external work). c) 25mm dia nominal bore
73   18.16 Providing and fixing chromium plated brass bib cock of
                                                                         56       No
              approved quality. a) 15mm nominal bore
                                                                                                                         Total Amount for A =


In Words = (Rupees_______________________________________________________________________________________________________________________________________)only.
                                                    2. BILL OF QUANTITIES (BOQ) FOR SEPTIC TANKS-2NOS. - B

Name of Work : C/o 1000 Capacity Auditorium at MZU, Tanhril                                          Tender Amount for Septic Tank= Rs.221056.66p
SL.   SOR                                                                                           Rate
                                   Particulars                          Qty     Unit                                                     Amount
No.    No                                                                              In figures            In words
 1    2.07 Earthwork in excavation in foundation trenches or
           drains etc. (not exceeding 1.5m in width or 10sqm on
           plan) including dressing of sides and ramming of
           bottoms, lift upto 1.5m including getting out excavated      76.25   m3
           soil and disposal of surplus excavated soil as directed
           within a lead of 50 metres.
           b) Hard Soil ( pick work ).
 2    4.07 Providing and laying cement concrete 1:4:8 (1 cement : 4
           coarse sand : 8 graded stone aggregate 40mm nominal size)
           excluding cost of centering and shuttering in - All work     4.58    m3
           upto foundation & plinth level.
 3     6.01 First class brickwork in foundation upto one storey
            above and below ground level including curing, etc.
                                                                        11.35   m3
            complete.                   b) in cement mortar 1: 4 ( 1
            cement : 4 fine sand )
 4     6.05 Half brick masonry with first class brick in foundation
            upto one storey above and below ground level
                                                                        6.00    m2
            including curing, etc. complete. b) in cement mortar 1:
            4 ( 1 cement : 4 fine sand )
 5    21.17 20mm cement plaster 1 : 4 (1 cement : 4 fine sand).         42.55   m2
 6     5.01 Providing and laying reinforced cement concrete 1:2:4
            (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
            nominal size) excluding cost of centering and shuttering
            and reinforcement in -                               c)
                                                                        3.12    m3
            Beams, suspended floors, roofs having slope upto 15
            degree, landings, balconies, shelves, chajjas, lintels,
            bands, window sills, stair cases, spiral stair cases,
            cantilevers upto floor five level.
7     5.08 Centering and shuttering including strutting, propping,
            etc. and removal of form works in - e) Suspended
                                                                     24.00    m2
            floors, roofs, landings, shelves and their support,
            balconies and chajjaj, etc.
8     5.06 HYSD bars reinforcement for RCC work including
            straighthening, cutting, bending, placing in position    249.60   Kg
            and binding all complete.
9     2.21 Providing and filling stone aggregates of size below
            90mm in plinth, etc. in layers not exceeding 20 cms in
                                                                     18.80    m3
            depth, consolidating each layer by ramming and
            watering and dressing complete.
10 17.129 Providing and fixing sand cast iron (Spun) soil, waste
                                                                     56.00    rm
            and vent pipe. 100mm dia.
     17.136 Providing and fixing sand cast iron single equal plain
                                                                      6.00    No
  11        junction of required degree.
                                                                                                                            Total Amount for B =

                  In Words = (Rupees_______________________________________________________________________________________________________)only.
                                                          3. BILL OF QUANTITIES (BOQ) FOR WATER TANK - C

Name of Work : C/o 1000 Capacity Auditorium at MZU, Tanhril                                           Tender Amount for Septic Tank= Rs.582020.55p
SL.   SOR                                                                                            Rate
                                    Particulars                          Qty     Unit                                                     Amount
No.    No                                                                               In figures          In words
 1    2.07 Earthwork in excavation in foundation trenches etc. not       175     m3
           exceeding 2 meters depth including dressing of bottom
           and sides of trenches and subsequent filling as in
           column foundations, fence posts, etc. and disposal of all
           surplus soil as directed within a lead of 30 metres. b)
           Hard Soil ( pick work ).
 2    4.07 Providing and laying cement concrete 1:4:8 (1 cement : 4       7.5    m3
           coarse sand : 8 graded stone aggregate 40mm nominal size)
           excluding cost of centering and shuttering in - All
           work upto foundation & plinth level.
 3     5.42 Providing and laying in position machine batched,
            machine mixed and machine vibrated design mix M-20
            grade reinforced cement concrete excluding cost of
            centering and shuttering and reinforcement in -
            a) All work upto foundation & plinth level.                  7.31    m3
            c) Beams, suspended floors, roofs having slope upto 15       5.48    m3
            degree, landings, balconies, shelves, chajjas, lintels,
            bands, window sills, stair cases, spiral stair cases,
            cantilevers upto floor five level.
            b) Walls including attached pillasters, columns, pillers,    17.23   m3
            posts, piers, abutments, return walls, retaining walls,
            struts, buttresses, string or lacing courses, fillets etc.
            upto floor five level.
 4    20.26 Providing and mixing water proofing chemical (                30     m3
            PIDIPROOF POWDER chemical) in plain and
            reinforced cement concrete work 1 : 1.5 : 3 , @ 1.0 % by
            weight of cement.
5    5.08 Centering and shuttering including strutting, propping,       8.98     m2
          etc. and removal of form works in -                   a)
          Foundations, footings, bases of columns etc. for mass
          concrete.
          b) Walls including attached pillasters, buttresses, string   191.40    m2
          courses, etc.
          e) Suspended floors, roofs, landings, shelves and their       36.81    m2
          support, balconies and chajjaj, etc.
6    MR HYSD bars (Fe500) reinforcement for RCC work                   3001.85
          including straighthening, cutting, bending, placing in
          position and binding all complete.
7   21.25 20mm cement plaster 1 : 4 (1 cement : 4 fine sand)           135.30    m2
          finished with a floating coat of neat cement
    21.46 Extra for providing and mixing water proofing material       135.30
          'Impermo' of M/s Snowcem India Ltd., or equivalent in
          cement plaster work in proportion recommended by
          the manufacturers : (f ) 20 mm cement plaster 1:4 (1
          cement : 4 sand)
9     LS Providing and fixing GI pipes for draining, overflowing        3.00     No
          and interflow of water in water tank etc complete 100F
          GI pipe
                                                                                                                           Total Amount for C =

                 In Words = (Rupees_______________________________________________________________________________________________________)only.
                                                      4. BILL OF QUANTITIES (BOQ) FOR ACCOUSTIC - D

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                           Tender Amount for Accoustic = Rs.6502650.00p
                                                                                              Rate
Sl No                       Description                         Qty   Unit                                                           Amount
                                                                             In figures              In Words
        WALL ACOUSTICAL TREATMENT
  1     Providing & Fixing of Accoustic Wooden Wall
        Panelling using 1.0mm thick GI grid of 150X65mm
        @1200mm C/C (Max) and finished with 6mm thick
        teak wood veneeing on 8mm plywood with lacquer          200   Sqm
        polish as per drawing and as directed by the
        consultant (Make: Greenply, Century)

  2     Providing & Fixing of Accoustic Perforated
        Gysum Wall Panelling using 0.8mm thick GI Grid
        of 50X50mm @600mm C/C (Max), backed with
        50mm thick 24Kg/M3 Fibre Glass wool protected
        with F.G.Tissue Paper and covered with fully
        perforated 600X600mm gypsum tiles and finally           300   Sqm
        finished with 1 coat of acrylic primer and 2 coats of
        acrylic plastic emulsion paint as per drawing and
        as directed by the consultant (Make: India
        Gypsum, Lafarge)

  3     Providing & Fixing of Fabic Covered Accoustic
        Wall Tiles of Size 600X600X25mm on 0.8mm
        thick GI Grid of 50X50mm @600mm C/C (Max) as
        per drawing and as directed by the consultant           100   Sqm
        (Make: Anutone, Armstrong). Note: The fabric
        design and colour has to be approved by the
        consultant.
4   Providing & fixing of black coloured acoustic
    wood wood wool tiles for Stage Walls of size
    600x600X20mm having a denisity of 500 Kg/M3
    directly screwed on 0.8mm thick GI Grid of
    50X50mm at 600X1200mm C/c (max) leaving a
    50mm air gap between the wall and wood wool            400   Sqm
    panel and finally finished with 2 coats of synthetic
    enamel paint as per tender drawings and as
    directed by the consultant for stage and wing area
    (Make: Aunotone / Fibrecrete)

5   Providing & fixing of Teak Wood Skirting on
    bottom and top of wooden wall panelling duly                 R
                                                           150
    polished with spirit and stain as per drawing and as         Mtr
    directed by the consultant

6   Providing & fixing of double leaf Accoustic Doors
    made using 100mm thick hard wood hollow
    framing filled with 24Kg/M3 desnity fibre glass
    wool, fixed with 8mm water proof ply wood on both
    sides, finally pasted with teak vineer on both sides
    duly polished, consisting of peripheral seals all
                                                                 Sq
    around on existing 150mm wide Sal chowkhat, with       15
                                                                 Mtr
    small small 150mm X 150mm glass winodw, with
    complete hardware including panic bars, steel
    hinges with ball bearings, latches, pad lock, lock
    etc complete in all respect and as directed by the
    Consultant



    CEILING TREATMENT
7    Providing & fixing of black coloured Soft Mineral
     Fibre Ceiling tiles of size 600x600X20mm with
     high NRC value greater than 0.9 on a black
     powder coated GI T grid framework as per tender        650   Sqm
     drawings and as directed by the consultant for
     main auditorium ceiling (Make: Armstrong/Amg)

8    Providing & fixing of Gysum Ceiling on GI Frame
     including 3 coats of emulsion paint finish as per IS
                                                            50    Sqm
     and as directed by the consultant (Make: India
     Gypsum / Lafarge)
9    Providing & fixing of black coloured acoustic
     wood wood wool tiles of size 600x600X20mm
     having a denisity of 400 Kg/M3 placed on a black
     powder coated GI T grid framework as per tender        320   Sqm
     drawings and as directed by the consultant for
     stage and wing area (Make: Aunotone /
     Fibrecrete)
10   Providing and laying of overdeck insulation on
     false ceiling using 50mm thick glass wool pads
     having a density of 24 Kg/M3 properly put in
                                                                  Sq
     polythene bags and open ends folded, stapled and       970
                                                                  Mtr
     sealded with 50mm wide BOPP adhesive tape as
     directed by the consultant (Make: Up Twiga /
     Owens Cornings)

     Floor Treatment
11   Providing and Fixing of 100% bcf Polypropylene
     bulk continious filament yarn dyed carpet
     having pile height of 6mm including underlaymeny
     with 4mm Insu Shield FR grade cross linked
     closed cell material pasted on the floor with SR
     988 adhesive. After llaying the carpet all the steps
     edges will be finished/protected with stair edging     715   Sqm
     strips duly screwed to the floor concrete using pvc
     inserts and metal screws. The carpet shade and
     design will be approved by the consultant before
     supply. (Make: Unitex or approved equal)



                                                                                          Total Amount of D =

     In Words = (Rupees__________________________________________________________________________________________) only
                                               5. BILL OF QUANTITIES (BOQ) FOR STAGE FURNISHING - E

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                  Tender Amount for Stage Furnishing = Rs.2486880.00p
                                                                                           Rate
Sl No                      Description                        Qty   Unit                                                           Amount
                                                                           In figures             In Words
  1     Providing and fixing of Stage resilent wooden
        flooring using 100x18mm steam beech wood
        planks with tounge & groove joints. Steam beech
        planks to be of minimum 1200mm. Having two
        layers of marine ply. Neoprene rubber pads &
        3mm MS plate as support. The frame to be filled             Sq
                                                              250
        with 50mm 800GSM mikron. Stage edging to be                 Mtr
        provided using 100 X 35mm steam beech wood.
        The flooring will be finally finished with melamine
        water proof polish as directed by the consultant.


  2     Providing and fixing of Masking Legs & Borders
        made of 40x25mm metal framework faced with
        black coloured fire retardant fabric as facing
        backed with foam & 6mm thick commercial water
                                                              12    each
        proof plywood and suitabley hung from the top; the
        fabic should cover both sides of the mask with
        foam on both side, and as directed by the
        consultant.

  3     Providing and fixing of valance made out of velvet
        cloth in draping pattern suitably hung from MS pipe
                                                              1     each
        as per the design details and as directed by the
        consultant.
4   Providing and fixing of cyclorama for the stage
    with PVC cyce clot & MS frame which can also be
    used as a projection screen and with provison of    1   each
    adding multiple scenes as per design and as
    directed by the consultant
5   Providing and fixing of biparting motorised Main
    Curtain made out of velvet cloth with horizontal
    sliding arrangement (size 11400 X 5500) as per      1   each
    design and as directed by the consultant

6   Providing and fixing of Rear biparting motorised
    Main Curtain made out of glazed cotton black
    colour cloth with horizontal sliding arrangement    1   each
    (size 11400 X 5500) as per design and as directed
    by the consultant
                                                                                                  Total Amount of E =

         In Words = (Rupees__________________________________________________________________________________________) only
                                                    6. BILL OF QUANTITIES (BOQ) FOR ELECTRICAL - F

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                             Tender Amount for Electrical = Rs.4732824.58p
                                                                                             Rate
Sl No                      Description                        Qty    Unit                                                             Amount
                                                                             In figures               In Words
        RE- WIRING IN STEEL/PVC CONDUIT
  1     Wiring in existing conduit: Supplying and
        drawing following sizes of FR PVC insulated
        copper conductor, single core cable in the existing
        surface / recessed steel / PVC conduit as required.

 1.1 3 x 1.5 sq.mm                                            2500   Metre
 1.2 2x 6 sq.mm + 1 x 2.5 sq.mm                               200    Metre
  2 Telephone wiring in existing conduit: Supplying
     and drawing following pair, 0.5 sq.mm FR PVC
     insulated copper conductor, unarmoured telephone
     cable in the existing surface/ recessed steel/ PVC
     conduit as required.

 2.1 2 Pair                                                   50     Metre
  3 S/F PVC conduit: Supplying and fixing of
     following sizes of PVC conduit along with
     accessories in surface/recess including cutting the
     wall and making good the same in case of
     recessed conduit as required.
 3.1 20 mm                                                    500    Metre
 3.2 25 mm                                                    800    Metre
 3.3 32 mm                                                    200    Metre
     SWITCHES & ACCESSORIES
4     S/F moduler type switch/socket: Supplying and
      fixing following moduler switch / socket on the
      existing moduler plate & switch box including
      connections but excluding moduler plate etc. as
      required.
4.1   5/6 amps switch                                       353   Each
4.2   3 pin 5/6 amp socket outlet                            24   Each
 5    S/F moduler type electronic fan regulator:
      Supplying and fixing stepped type electronic
      fanregulator on the existing moduler plate switch     52    Each
      box including connections but excluding moduler
      plate etc. as required.
6     S/F moduler type blanking plate: Supplying and
      fixing moduler blanking plate on the existing
                                                            100   Each
      moduler plate & switch box excluding moduler
      plate as required.
7     S/F moduler boxes,base & cover plate: Supplying
      and fixing following size/ modules, GI box along
      with moduler base & cover plate for moduler
      switches in recess etc. as required.
7.1   1 or 2 Module (75mmx75mm)                              2    Each
7.2   4 Module (125mmx75mm)                                  6    Each
7.3   6 Module (200mmx75mm)                                 13    Each
7.4   8 Module (125mmx125mm)                                15    Each
7.5   12 Module (200mmx150mm)                               28    Each
 8    S/F power plug point moduler type
      accessories: Supplying and fixing suitable size GI
      box with moduler plate and cover in front on
      surface or in recess including providing and fixing   2     Each
      6 pin 15/16 & 5/6 amps moduler socket outlet and
      15/16 amps moduler switch connection, painting
      etc. as required.
 9   S/F ceiling rose: Supplying and fixing 3 pin 5
     amp. Ceiling rose on the existing junction box /
                                                           52   Each
     wooden block including connection etc as required.

     MCB DISTRIBUTION BOARDS
10   S/F SP MCB DB: Supplying and fixing following
     way, single pole and neutral, sheet steel, MCB
     distribution board, 240 volts, on surface/recess,
     complete with tinned copper busbar, neutral
     busbar, earth bar, din bar, detachable gland plate,
     interconnections, phosphatized and powder
     painted including earthing etc. as required. ( But
     without MCB/RCCB/Isolator)

10.1 12 way, double door                                   3    Each
 11 S/F pre-wired TP MCB DB: Supplying and fixing
     following way, three pole and neutral pre-wired,
     sheet steel, MCB distribution board, 415 volts, on
     surface/recess, complete with loose wire box,
     turminal blocks duly pre-wired suitable size FR
     PVC insulated copper conductor upto terminal
     blocks, tinned copper busber, neutralic,earth bar,
     din bar, detachable gland plate, interconnections,
     phosphatized and powder painted including
     earthing etc. as required. ( But without
     MCB/RCCB/Isolator)
11.1 4 way(4+12), double door                              5    Each
12    S/F vertical type TP MCB DB: Supplying,
      installation, testing & commossioning of surface /
      recess mounting, vertical type 415 volts, TPN
      MCBDB of sheet steel, dust protected duly,
      phosthatized & powder painted , inclusive of 200A
      AMPS tinned copper busbar, common neutral
      link,earth bar, din bar for mounting MCB's
      detachable gland/knock out plate, and with 100
      amps, 10 ka MCCB as incomer interconnection
      between incomer MCCB abd busbars of following
      ways (but without MCB's) as required.

12.1 4 Way qith 100 amps MCCB as incomer                       2    Each
 13 S/F 'B' series, SP MCB: Supplying and fixing 5
     amps to 32 amps, rating, 240 volts, 'b' series,
     miniature circuit breaker suitable for lighting and
     other loads of following poles in the existing MCB
     DB complete with connections, testing and
     commissioning etc. as required.
13.1 Single Pole                                               50   Each
 14 S/F TP MCB Isolator: Supplying and fixing
     following rating three pole, 415 volts, isolator in the
     existing MCB DB complete with connections,
     testing and commissioning etc. as required

14.1 63 amps                                                   6    Each
 15 S/F TPN RCCB: Supplying and fixing following
     rating four pole, (three phase & neutral), 415 volts,
     residual current circuit breaker ( RCCB), having a
     sensitivity curent upto 300 milliampers in the
     existing MCB DB complete with connections,
     testing & commissioning etc as required.

15.1 25 amps                                                   8    Each
    EARTHING AND LIGHTENING PROTECTION

16 G.I. earth pipe electrode with salt / charcoal:
   Earthing with G.I. earth pipe 4.5 mtr long, 40mm
   dia encluding accessories, and providing
                                                         10     Set
   masonary enclosure with cover plate having
   locking arrangement and watering pipe etc. with
   charcoal and salt as required.
17 G.I. earth plate electrode: Earthing with G.I.
   earth plate 600mm X 600mm X 6mm thick
   including accessories, and providing masonary
                                                         8      Set
   enclosure with cover plate having locking
   arrangement and watering pipe etc. with charcoal
   and salt as required.
18 Copper earth plate electrode: Earthing with
   copper earth plate 600mm X 600mm X 3mm thick
   including accessories, and providing masonary
                                                         3      Set
   enclosure with cover plate having locking
   arrangement and watering pipe etc. with charcoal
   and salt as required.
19 S/L 6 SWG GI wire in ground: Suplying and
   laying 6 SWG G.I. wire at 0.50 meter below ground
                                                         100   Meter
   level for conductor earth electrode, including
   soldering etc. as required
20 S/L 25mm X 5mm GI earth strip in ground:
   Suplying and laying 25mm X 5mm G.I. earth strip
   at 0.50 meter below ground level for conductor        50    Meter
   earth electrode, including soldering etc. as
   required
21 S/L 25mm X 5mm Copper earth strip in pipe:
   Suplying and laying 25mm X 5mm Copper earth
                                                         50    Meter
   strip in 40mm dia G.I. pipe from earth electrode as
   required
 22 P/F 6 SWG GI loop earthing wire in
    surface/recess: Providing and fixing 6 SWG G.I.
                                                                200   Meter
    wire on surface or in recess for loop earthing as
    required
 23 P/F 25mm X 5mm GI earth strip in
    surface/recess: Providing and fixing 25mm X
                                                                20    Meter
    5mm GI earth strip on surface or in recess for
    connections etc. as required
 24 P/F 25mm X 5mm copper earth strip in
    surface/recess: Providing and fixing 25mm X
                                                                20    Meter
    5mm copper earth strip on surface or in recess for
    connections etc. as required
 25 P/F GI lightning conductor finial: Providing and
    fixing of lightning conductor finial, made of 25mm
    dia 300mm long, G.I. tube, having single prong at           10    each
    top, with 85mm dia 6mm thick G.I. base plate
    including holes etc. as required.
 26 P/F GI lightning conductor tape: Providning and
    fixing G.I. tape 20mm X 3 mm thick on parapet or
    wurface wall for lightning conductor complete as            100   Meter
    required and finally conecting to GI earth pits

     Armoured Cable
 27 S/L of XLPE Aluminium Armoured Cable:
     Supply and laying of PVC insulated XLPE power
     cable of 1.1 KV grade of following size in ground
     including excavation, sand cushioning, protective
     covering and refilling / cable tray / electrical ducts /
     under floor etc. complete in all respects including
     end termination including all accessories like
     glands/lugs, etc.
27.1 4C X 6 Sqmm Cu. Ar. Cable                                  700   Rmt
27.2 3.5C X 35 Sqmm Al. Ar. Cable                               200   Rmt
27.3 3.5C X 150 Sqmm Al. Ar. Cable                               30   Rmt
27.4 3.5C X 185 Sqmm Al. Ar. Cable                            120   Rmt
     POLE ERECTION
 28 S/E of 50mm Dia GI Pole for Outdoor Lighting:
     Supply and erection of 50mm dia B Class Gi Pipe
     of 4 Mtr Lenghth in Cement concrete 1:3:6 (1
     cement: 3 coarse sand: 6 graded stone aggregate          13    Each
     40mm nominal size) foundation as per drawings
     and as directed by the consultant

     LIGHT FITTINGS
 29 S/I of Light Fittings: Supply, installation, testing
     and commissioning of following Prewired light
     fittings complete with all accessories including light
     tube, etc as per drawings as specified by the
     consultant
29.1 Down Light ( Phillips FBH 150/218 or approved eq)
                                                              38    Each
29.2 Spot Light ( Phillips MCN 810/070 or approved eq)
                                                              12    Each
29.3 Ceiling Mounted Light ( Phillips FCS 518/211 or
                                                              64    Each
     approved eq)
29.4 Havells Prisma 1 / 60 W GLS or approved eq               18    Each
29.5 Recessed Mounted T5 Tube Light (TBS288 2 X
                                                              113   Each
     TL5 - 28W HF G2 BL IN) or approved eq)
29.6 Garden Light (Phillips SPC/101/70 (E) HPF or
                                                              13    Each
     approved eq)
29.7 Flood Light (Phillips SNF 114 250W NB or
                                                              3     Each
     approved eq)
29.8 Bracket Light ( Phillips FL 800/320 NrG or
                                                              5     Each
     approved eq)
#### Surface Mounted T5 Tube Light (TPH 824/228 D8
                                                              60    Each
     DI HF) or approved eq)
     FANS
 30 S/I of Fans: Supply, installation, testing and
     commissioning of following Fans/Exhaust Fans
     including all accessories, consumables and
     necessary civil work if required complete in all
     respect as per drawings as specified by the
     consultant
30.1 1200mm sweep Ceiling Fan                              52   Each
30.2 250mm exhaust fan                                     31   Each
     MAIN ELECTRICAL PANEL
 31
     Supply, installation, testing and commissioning of
     M.V. cubicle type totally enclosed free standing
     type, dust, damp and vermin proof extendable,
     Main LT Panel complete with busbars, M.V.             1    Each
     danger notice plate, ammeter, ammeter selsctor
     switch, voltmeter, asp per specification & Drawing
     (The panel must be fabricated by a CPRI approved
     manufactuer only)
     DG SET
 32 Supplying, installation, erection, testing, and
     commissioning of DG SET with rated capacity of
     200KVA at 0.8 P.F., including AMF Panel, silent
                                                           1    Each
     canopy, engine, alternator complete in all respects
     as required and as directed by the consultant
     (Make: Jackson, Kirloskar)
                                                                                                    Total Amount of F =

           In Words = (Rupees__________________________________________________________________________________________) only
                                                        7. BILL OF QUANTITIES (BOQ) FOR FIRE - G

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                                Tender Amount for Fire = Rs.2662685.52p
                                                                                               Rate
Sl No                      Description                        Qty   Unit                                                           Amount
                                                                           In figures                 In Words
        FIRE HYDRANT SYSTEM & ALARM SYSTEM


  1     SITC of Main Fire Pumps: Supply and fixing
        horizontal single / multistage pumping set with CI
        body, bronze impeller, Stainless Steel Shaft ,
        Shaft Sleeve & nuts as per AISI-410 with
        mechanical seal and connected by a flexible
        coupling to a totally enclosed fan cooled induction
        motor mounted on common structural base plate
        with all pump accessories complete as per
        specifications vibration eliminators of approveal
        make. Motor to be suitable for 415 volts, 3 phase,
        50 Hz. A/C supply including pump rcc foundation
        and complete in all respect. (Make: Kisloskar)


 A)     MAIN PUMP                                              1    Each
        Type of Pump       - Centrifugal end suction type
        Capacity         - 2850 LPM
        Head             - 50 Mtr
        Motor Capacity - As required
        Motor Type        - TEFC, 2950 RPM, 3 Ph, 415 V,
        50 Hz
        Reqd. Accessories - Base Frame, Coupling,
        Coupling Guard, AVM Pads, Mechanical Seal,
        delivery and suction bellows
     Note: The Pump, Motor & all accessories must be
     assembled on the base frame by the pump
     manufacturer directly


B)   JOCKY PUMP                                          1   Each
     Type of Pump       - Centrifugal end suction type
     Capacity         - 180 LPM
     Head             - 50 Mtr
     Motor Capacity - As Required
     Motor Type        - TEFC, 2950 RPM, 3 Ph, 415 V,
     50 Hz
     Reqd. Accessories - Base Frame, Coupling,
     Coupling Guard, AVM Pads, Mechanical Seal,
     delivery and suction bellows
     Note: The Pump, Motor & all accessories must be
     assembled on the base frame by the pump
     manufacturer directly

C)   ELECTRICAL STARTER AND CONTROL PANEL
     FOR    ABOVE    INCLUDING  PRESSURE
                                                         1   Each
     SWITCHES,    TANK    LEVEL SWITCHES
     REQUIRED

     Note: all pump selected and sld / ga of panel has
     to be approved by the consultant before
     procurement of material by the contractor
2    Supply and fixing of Mild Steel black pipes
     (IS:1239 Part- I heavy class) including cutting,
     welding/threaded joint and all fittings viz. flanges,
     bends, tees, elbows, reducers, clamps, hangers,
     structural supports, concrete anchor blocks, nuts
     and bolts, gasket etc. Also cutting holes/chasing in
     brick or RCC walls/slabs and making good
     complete, painting with one coat of primer (red
     oxide) and two or more coat of synthetic enamel
     paint to give an even shade of approved shade
     (Make: Jindal / Nezone)

a)   20 mm                                                   38   Metre
b)   25 mm                                                   25   Metre
c)   32 mm                                                   15   Metre
d)   40 mm                                                   14   Metre
e)   50 mm                                                   13   Metre
f)   65 mm                                                   18   Metre
g)   80 mm                                                   22   Metre
h)   100 mm                                                  32   Metre

3    Supply and fixing cast iron double flanged
     horizontal type non-return valve PN-1.0 (as per
     IS:5312) including nuts, bolts, 1.5 mm thick CAF
     gasket sheets complete in all respects. (Make:
     Audco / Castle / Kartar / BIR)

a)   100 mm                                                  1    Each
b)   150 mm                                                  2    Each
4    Supply and fixing pressure gauge dial size
     100mm, range 0-10 kg/Cm sq. complete with
                                                           3   Each
     chrome plated isolation valve and syphon. (Make:
     H Guru / Feibig)

5    Supply and fixing cast iron butterfly valve as per
     IS:13095 (PN:1.0) including nuts, bolts, 1.5 mm
     thick CAF gasket sheets complete in all respect.
     (Make: Audco / Castle / Kartar / BIR)

a)   100 mm                                                3   Each
b)   150 mm                                                2    Each

6    Supply and fixing GM stop valve ISI marked
     (IS:778) screws type tested to 30 kg/sq. cm
     pressure of following size: (Make: Zolloto / BIR)

a)   25 mm                                                 5   Each

7    Supply and fixing gun metal two way collecting
     head with 63 mm dia instantaneous type inlet with
     built in check valve for fire brigade connection to
                                                           1   Each
     underground tank (Make: Vijay Fire, Minimax,
     Newage)


8    Supply and fixing cast iron flanged foot valve with
     nuts, bolts 1.5mm thick CAF gasket complete with
     all accessories as per IS :4038 . (Make: Kalpana/
     Kirloskar)
a)   150 mm                                                1   Each
b)   100 mm                                                1   Each
9    Supply and fixing black steel pipe to IS:1239
     (Heavy Class) including all fittings like anchor
     fastners, couplings, bends, elbows, tees, flanges,
     gasket etc. Welding as required painting with coat
     of solvent based primer and wrapping with 5
     layered corrosion protection tape (2mm thick with
     50% overlapping to get a final thickness of 4mm on
     the surface of pipe) coat tar based conforming to
     IS:10221 including necessary earth excavation
     and refilling, masonary supports complete in all
     respect. (For under ground piping). The rates
     quoted shall be inclusive of all structural supports,
     clamps & concrete anchor blocks.(Make: Jindal /
     Nezone)

a)   150 mm                                                  60   Meter

10 Supply and fixing of gunmetal, ISI marked oblique
   pattern fire hydrant landing valve with 80mm dia
   flanged inlet and 63mm dia instantaneous type
   femal type lug and all accessories type femal type
   lug and all acccessories as per IS:290-1983 'Type-
   A' with hydrant matching flanges,gaskets, nuts
   and bolts etc. complete in all recpects. (Make:
   Vijay Fire, Minimax, Newage)

a)   Single headed                                           5    Each

11 Supply and fixing 63mm dia X 23 Mtr. long RRL
   hose including gunmetal male and female
   instantaneous type coupling (IS:903), machine
   wound with copper wire complete in all respects
   with ISI certification.
a)   RRL Hose pipe                                          5    Each

12 Supply and fixing of gun metal 63 mm dia short
   branch pipe with 20mm dia nozzle, ISI marked
                                                            5    Each
   (IS:903). (Make: Vijay Fire, Minimax, Newage)


13 Supply and fixing of fire hose cabinet of size 650
   x 450 x 250 approx. fabricated from 16 gauge MS
   sheet of fully welded construction with hinged
   double front door with locking arrangements and
   partially glazed with 5mm thick glass, duly powder
   coated fire red finish with fire hose written on front
                                                            5    Each
   suitable to house 1x23 M hose pipe with couplings.
   The width and height to depend upon the actual
   size of the fire shaft available. Contractor to make
   shop drawings and get it approved by Engineer-in-
   Charge/Consultant before fabrication.


14 Supply and fixing first aid fire hose reel drum
   wall mounting swinging type fitted with 30 mtrs. 20
   mm dia highpressure rubber hose confirming to
                                                            5    Each
   IS:5132 with 5mm outlet gunmetal nozzle with shut
   off valve (IS:884). (Make: Vijay Fire, Minimax,
   Newage)

15 Supply, fixing, testing and commissioning of 15
   mm dia Pendent type sprinkler set to operate at          42   Each
   68 Deg. C (Make: Tyco / HD)
16 Supplying, installing, testing and commissioning of
   Microprocessor based main 10 Zone Fire Alarm
   Control Panel with LCD Display, Hooter
   activation, Autodialler etc. Builtin Battery charger   1     Each
   and Batteries etc. complete in all respects for
   running and operation. (Make: Honeywell / Morley /
   Agni)

17 Supplying, installing, testing and commissioning of
   Optical Smoke Detectors. (Make: Honeywell /            49    Each
   Morley / Apollo)

18 Supplying, installing, testing and commissioning of
   Beam Detectors. (Make: Honeywell / Morley /            6     Each
   Apollo)

19 Supplying, installing, testing and commissioning of
   Manual Call Point. (Make: Honeywell /Morley /          10    Each
   Apollo)

20 Supplying, installing, testing and commissioning of
   Hooter. (Make: Honeywell /Morley / Apollo)             10    Each


21 Supplying, installing, testing and commissioning of
   cabling for Fire Detection and Alarm system with 2
   cores of 1.5 sq.mm FRLS PVC insulated wire in          800   Mtrs.
   existing conduit. (Make: RR Kabel / Finolex)
22 Supplying and fixing 20 mm dia PVC conduit 2
   mm thick ISI marked in recessed/surface for
   extension of existing conduit complete with bends
                                                        800   Mtrs.
   junction boxes, including cutting chases in the
   walls and making good the same as requied. (
   Make: Approved ISI makes)

    Supplying and fixing of Fire Extinguishers of ISI
    marked Makes duly installated and commissioned
    as directed by the consultant as per following (
 23 Make: Minimax / Omex)
a) 5 Kg ABC Type Fire Extinguisher                      15    Nos
b) 4.5 Kg CO2 Type Fire Extinguisher                     6    Nos
c) 9 Kg AFFF type Fire Extinguisher                      4    Nos
d) 2 Kg Modular Fire Extinguisher                        2    Nos
                                                                                                  Total Amount of G =

         In Words = (Rupees__________________________________________________________________________________________) only
                                                           8. BILL OF QUANTITIES (BOQ) FOR HVAC - H

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                                 Tender Amount for HVAC = Rs.5433912.00p
                                                                                                 Rate
Sl No                       Description                          Qty   Unit                                                          Amount
                                                                              In figures                In Words
  1     SITC of 22 Tr nominal capacity floor mounted
        packaged airconditioners having multiple scroll
        compressor, microprocessor control including
        centrifugual evaporator fan driven by TEFC motor,
        all refrigerant control including thermostatic
                                                                 4     Nos
        expansion valve, air cooled condensers with
        propellor type fans, all electrical controls, complete
        in all respect (Make: Bluestar, Voltas, Carrier)
        including the following work:

        a) Refrgerant copper piping between indoor unit &
        outdoor unit properly supported by GI Cable Tray
        with anti vibration nitrile media between pipes and
        tray
        b) Electrical interconnection between IDU & ODU
        using armoured cables on GI Cable Tray
        c) Electrical power cable from local disconnect
        panel (located in AHU room) to equipment using
        armoured cable on GI cable tray
        d) Nitrogen pressure testing & vaccumising of
        refigerant circuit
        e) Regrigerant Gas Charging
        f) Fire Retardant Canvas connection with Ducts
        including Duct Damper
        g) Suitable anti vibration Pads for all indoor and
        outdoor units
        h) MS structure for mounting equipments
    i) Provision for fresh air addition using GI ducts,
    cowl, bird screen and duct damper for volume
    control

2   Supply, Fabrication & Fixing of GI Ducting as per
    IS653 including all accessories like duct support
    material, nitrile rubber gasket for flanges, MS
    Flange, MS Rod, GI nut bolt, washer, j hook, GP
    Sheet, complete in all respect as per drawing
    (Make: Tata, Nippon, Sail)

2.1 0.8 mm thick                                                 Sq
                                                           400
                                                                 Mtr
2.2 0.6 mm thick                                                 Sq
                                                           350
                                                                 Mtr

3   Supply & Fixing of Duct Thermal Insulation
    using 50mm thick Alum. Foil faced Fiber Glass
    Wool having a density of 24 Kg/M3 using CPRX
    compoud as adhesive and using a good quality
                                                                 Sq
    BOPP tape, and straping roll tied at 1.2 mtr           750
                                                                 Mtr
    intervals in the entire duct (including where
    accoustic insulation is also being done) complete
    in all respect as per drawing (Make: Twiga, Owens
    Corning)

4   Supply & Fixing of Duct Accoustic Insulation
    using 25mm thick Resin bonded Fiber Glass rigid
    board having a density of 48 Kg/M3, F.B. Tissue
                                                                 Sq
    Paper, 28G Perforated fixed using GI Nut, Bolt,        80
                                                                 Mtr
    washer at 150mm grid arrangement in all plenums
    and first 5 Mtr of all ducts complete in all respect
    as per drawing
5   Supply & Fixing of Wall Accoustic Insulation
    lining on inside walls of AHU Rooms and
    Return Air Shaft Wall (from bottom to top) using
    50mm thick Resin bonded Fiber Glass rigid board
                                                                 Sq
    having a density of 48 Kg/M3, F.B. Tissue Paper,       250
                                                                 Mtr
    28G Perforated fixed on a 900 X 600 GI channel
    grid using metal scew and washer complete in all
    respect as per drawing (Make: Twiga, Owens
    Corning)

6   Supply & Fixing of Aluminium powder coated
    Grills, Diffusers including Alum. Collar Dampers             Sq
                                                           15
    complete in all respect as per drawing (Make:                Mtr
    Airflow, Caryaire, Ravistar)

7   Supply & Fixing of Motorised Fire Damper having
    duct mounted multiple criteria fire sensor wired and
    commissioned to shut off the AC in the event of              Sq
                                                           3
    sensing any fire and raising an audio alarm                  Mtr
    complete in all respect as per drawing (Make:
    Airflow, Caryaire, Ravistar)

8   Supply & Fixing of Condensate Drain Water
    Piping using CPC 32mm dia Pipe and fittings
    terminated to nearest drain point complete in all       1    Lot
    respect as per drawing (Make: Supreme,
    Aashirwad)
9   SITC of 1.5 Tr nominal capacity Hiwall Split
    Airconditioners (3 Star Rated minimum) FOR
    GREEN ROOMS having rotary compressor,
    microprocessor control including direct driven
    evaporator fan, all refrigerant control including
                                                           2   Nos
    capillary tube, air cooled condensers with propellor
    type fans, all electrical controls, including a wall
    mounted voltage stabiliser, starter etc complete in
    all respect (Make: Bluestar, Voltas, Carrier)


10 SITC of 3.5 Tr nominal capacity Hiwall Split
   Airconditioners FOR Exhibition Space having
   scroll compressor, microprocessor control
   including direct driven evaporator fan, all
   refrigerant control including capillary tube, air       4   Nos
   cooled condensers with propellor type fans, all
   electrical controls, including a wall mounted
   voltage stabiliser, starter etc complete in all
   respect (Make: Bluestar, Voltas, Carrier)
                                                                                                   Total Amount of H =

          In Words = (Rupees__________________________________________________________________________________________) only
                                                 9. BILL OF QUANTITIES (BOQ) FOR STAGE LIGHTING - I

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                     Tender Amount for Stage Lighting = Rs.4071804.00p
                                                                                            Rate
Sl No                     Description                        Qty    Unit                                                            Amount
                                                                           In figures              In Words
  1     Supply & fixing of 1000 W Halogen profile light
        consisting of 2 nos. 150mm dia PC lenses,
        imported sockets, ellipsoidal anodised alluminium
                                                             11     nos
        reflector, 1000W halogen BipinT-11 lamp, yoke
        colour frame & suitable clamp as approved by the
        consultant
  2     Supply & fixing of 2000W Planoconvex Spot
        Light complete with 2000W Halogen Bipin CP-41
        lamp, spherical anodised reflector, 200 mm dia
                                                             2      nos
        Planoconvex lens, rear sliding knob, yoke, colour
        frame & suitable clamp as approved by the
        consultant
  3     Supply & fixing of 1000W Halogen Fresnel light
        consisting of1000W Halogen Bipin T-11 lamp,
        150mm dia imported fresenel lens, Imported
                                                             26     nos
        socket, bottom sliding knob, yoke, colour frame &
        suitable clamp. as approved by the consultant

  4     Supply & fixing of 1000 W Halogen light with
        mash & barndoor         consisting of 2nos. single
                                                             11     nos
        contact compressible holders, yoke, 1000W
        halogen tube & suitable clamp
5   Supply & fixing of 1000W Halogen Planoconvex
    spot light complete with1000 W Halogen Bipin T-
    11lamp, spherical anodised reflector, imported
                                                           6     nos
    socket, 150mm dia planoconvex lens, bottom
    sliding knob, yoke, colour frame & suitable clamp

6   Supply & fixing of 1000W, 240 Volt, PAR Sealed
    Beam Light with CRC Sheet Metal and alluminium
    die casting, mat black color, yoke & clamp Type:      28     nos
    Modern-64 as approved by the consultant

7   Supply & fixing of 500W Halogen Cyclorama
    Flood Lights with 500W Halogen tubes.
    Alluminium anodised reflector, 2nos compressible
                                                          12     nos
    recessed single contact holders, colour frame &
    suitable clamp as approved by the consultant

8   Supply & Fabrication of M.S. Ladders / Cat Walk
    / other necessary support structures etc for the
    stage area as directed by the consultant including
    all material, labour, consumables including, Gas,
                                                          5000   Kg
    welding rod, primer and synthectic paint etc.
    complete in all respect as directed by the
    consultant as approved by the consultant

9   Supply & fixing of Floor mounted dimmer rack
    with 48 nos single phase 4 KW electronic dimmers
    to be distributed in 3 phases with suitable bus bar
    arrangement housed in sheet metal enclosure.0-10
                                                           1     nos
    volt analogue output, blown fuse indicator, output
    light indicator, preheater switch for filament
    heating, local controls as approved by the
    consultant
10   Supply & fixing of Cross connecting panel 148 x
     148 way having 148 nos. 4mm sheathed sockets
     fitted on the panel for interchanging the light
     circuits with the dimmers as desired. The
     connection can be made with patchcords having           1     nos
     4mm sheathed banana plugs at both the ends with
     1 mtr. Super flexible cable of 40 SWG. The patch
     panel has neutral & earth bar connection strip as
     approved by the consultant
11   Supply & fixing of 48 Channel Control panel ( 96
     in wide mode) consisting of 24 sub masters, in 9
     pages manual controls with 2 sub masters, 1
     master fader , blinker switches, effects control,
     DMX output and soft patch to 512 DMX channels,          1     nos
     400 memories, LCD menus , Floppy disk drive,
     HTP control, Provision for Controlling 24 intelligent
     lights etc…as approved by the consultant

12   50mm dia B class GI pipe to be hung from existing
     grid or roof structure for side wings, lighting         120   mtr
     bars.as approved by the consultant
13   Supply & fixing of Manual winch operated
     suspension sets 350 Kg capacity 5 lines with
     12m/10m barrel, 5 line blocks winch unit with
     handle and rachet, clutch plate and steel wire
                                                             6     nos
     rope.(4 winches for stage lighting bar, 2 winches
     for microphones and scenarios) winch mounting
     etc.. as approved by the consultant

15   Supply & fixing of Aritic Lighting elements in the
     auditorium using various types of LED lighting as       1     Job
     directed by the consultant
16   Supply, laying and termination of suitably sized
     Electrical Cables including all accessories
                                                        1   Lot
     including GI Cable tray for all the above
     equipments as directed by the consultant
17   Supply and installation of suitable electrical
     power distribution panel as directed by the
     consultant (Note: This panel will also provide
     power & control for all auditorium lights with     1   Nos
     dimmers / provide necessary power for audio &
     video / provide power for other auxiliary power
     requirements)
                                                                                                    Total Amount of I =

          In Words = (Rupees__________________________________________________________________________________________) only
                                                      10. BILL OF QUANTITIES (BOQ) FOR AUDI SEATING - J

Name of Work : C/o of Mizoram University Auditorium at Tanhril, Aizawl.                           Tender Amount for Audi Seating = Rs.5940000.00p
 Sl                                                                                              Rate
                        Description                       Qty       Unit                                                                Amount
 No                                                                            In figures              In Words
  1   Supply & Fixing of Push Back Auditorium Chairs
      suitable for instalng in 900mm tread, made as per Fire
      Safety Norms and Standards, with maximum lumbar
      support for fatigue free healthy seating, engineered for
      ergonomic shape, environment friendly with no wood
      used & CFC free, having 25mm x 5mm MS Flatmade
      back inner frame with 3 serpentine springs, PPCP
      Plastic molded one-piece inner seat frame, Molded
      Polyurethane foam cushioned seat back, Uphoistered
      with Flame Retardant Fabric with Scothgard for Stain
      Resistance, Zipper attached to seat back fabric for
      easy removability, epoxy powder coated paint for all        1000   Nos
      steel parts, Integrated skin type PU foam made arm
      rest without cup holder, Maintenance free
      Synchornized Push back system, with seamless seat
      supporting tray, Heavy gauge CRC Sheet made side
      stand covered with fabric - 4.5 Kg, Back side of the
      back covered with PPCP Plastic back cover, Chairs
      installed to the floor with expanded anchor fasteners
      including accessories like Seat number, Gangways &
      Aisle light boxes etc complete is all respect as directed
      and in color shade approved by the consultant (Make:
      Monarch, Rana, Kundan)
                                                                                                              Total Amount of J =

            In Words = (Rupees__________________________________________________________________________________________) only
                                     TOTAL BILL OF QUANTITIES

Name of Work : Construction of 1000 Capacity Auditorium at MZU, Tanhril


 Sl. No.         Items of Work          Tender Amount            Quotation Amount   Below/Above %
  1/A      Civil Works                          64972416.86
  2/B      Septic Tanks-2 Nos.                    221056.66
  3/C      Water Tank                             582020.55
  4/D      Accoustic                             6502650.00
  5/E      Stage Furnishing                      2486880.00
  6/F      Electricals                           4732824.58
  7/G      Fire                                  2662685.52
  8/H      HVAC                                  5433912.00
   9/I     Stage Lighting                        4071804.00
  10 / J   Audi Seating                          5940000.00
   11      GRAND TOTAL =                        97606250.17


   In Words = (Rupees___________________________________________________________________________

                        ________________________________________________________________________) only.




                                         Signature of Bidder :

                                            Name of Bidder : (________________________________)
                                                    Address :

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:586
posted:7/29/2011
language:English
pages:115