Black Bison Paste Wax
• Gives good resistance to finger and water marks
• Ideal for small surfaces
• Feeds, polishes and helps prevent wood drying out
• Highly lustrous and hard wearing
• Helps cover marks and scratches
• EN71 Part 3 Approved – Safe for toys
• Approved by the Guild of Master Craftsmen
• Silicone Free
USAGE COVERAGE APPLICATION DRYING TOOL
Liberon Black Bison Fine Paste Wax is ideal for nourishing and protecting all types of wood, including
lacquers and French polishes. Black Bison is well known for its quality and distinctive, pleasant smell. It is
traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural
beauty of wood whilst protecting it against dryness.
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary.
Apply Black Bison Fine Paste Wax sparingly with a cloth on a delicate / French polished surface or with ultra
fine steel wool (Liberon grade 0000) when a deeper penetration is required.
Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush.
Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish buff
with a Liberon Furniture Brush once the last coat has dried.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end
Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with
Colours: Antique Pine, Clear, Dark Oak, Georgian Mahogany, Golden Pine, Maple, Medium Mahogany,
Medium Oak, Neutral, Stripped Pine, Tudor Oak, Teak, Victorian Mahogany, Walnut, Yew.
150 ml, 500 ml, 5 L
For further information on this or other Liberon products please contact Liberon Technical Services on
This document was created with Win2PDF available at http://www.daneprairie.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.