Beverage Dispensing Equipment

Document Sample
Beverage Dispensing Equipment Powered By Docstoc
					             Beverage
Dispensing Equipment
                     Product Highlights


                                                   EUROPEAN “U, G
                                                   AND A” SYSTEM
                                                   WITH PROBE SEAL
                                                                                   DTC340U

                                                   Page 14




      PASS THROUGH
      AND T-TOWERS
      Page 39
                                                                DTC330G

                                                                               DTC320A




    SANITIZERS,                                 DRAFT BEER LINE
                                                GLYCOL CHILLERS
    DETERGENTS,
                                                Pages 4-5
    LINE CLEANERS
    Pages 32-35
                       GAS
                       BLENDERS
                           Page 6




2                    Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Contents

                       BEER CHILLERS                                       SANITIZERS,
                       Pages 4-5                                           DETERGENTS,
                                                                           LINE CLEANERS
                                                                           Pages 32-35


                       DISPENSE SYSTEMS                                    HOSE AND FITTINGS
                       Pages 6-8                                           Page 36




                       COUPLERS                                            DRAFT TOWERS
                       Pages 10-15                                         Pages 37-43




                       REGULATORS                                          ACCESSORIES
                       Pages 16-23                                         Pages 44-45




                       FAUCETS                                             COMPLETE KITS
                       Pages 24-27                                         Page 46




                       AIR DISTRIBUTORS                                    BEER DISPENSERS
                       Pages 28-29                                         Pages 47




                       PICNIC PUMPS                                        DRAFT BEER Q&A,
                       Pages 30-31                                         MAINTENANCE
                                                                           Pages 48-54




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                   3
Beer Chillers
Draft Beer Line Glycol Chillers — Made in the U.S.A.
Maintain beer temperature accurately for a 75 to 500 foot run.
Environmentally friendly R134A refrigerant. Compact footprint for
flexible placement. Durable construction and components for
today’s harsh environments. Made in USA.




 Maximum Distance to Tower               75'                                               125'
 Part Number                           BC-75                                              BC-125
 Compressor                            1/3 HP                                             1/3 HP
 Volts                       115V/60Hz, 15A Single Phase                       115V/60Hz, 20A Single Phase
 Bath Capacity                        5 Gallons                                         12 Gallons
 Pump Type                             Vertical                                   Gear with 1/3 HP Motor
 Pump Capacity                         60 GPH                                            80 GPH
 Dimensions                      22"H x 20"W x 24"D                                32"H x 18"W x 26"D
 Weight                                90 lbs.                                           110 lbs.
 Cabinet Cover                        Included                                           Optional

                                                                    ADDITIONAL FEATURES:
                                                                    • Digital temperature display and control.
                                                                    • Air cooled or water cooled models
                                                                    • Available with second pump and motor.
                                                                    • Lift off refrigeration system for easy service.




4                                    Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Beer Chillers
Draft Beer Line Glycol Chillers




                     250'                                                  500'
                    BC-250                                                BC-500
                    1/2 HP                                                 1 HP
         115V/60Hz, 20A Single Phase                           230V/60Hz, 15A Single Phase
                  12 Gallons                                            12 Gallons
            Gear with 1/3 HP Motor                                Gear with 1/3 HP Motor
                    80 GPH                                                80 GPH
               32H x 18W x 26D                                       37H x 24W x 33D
                   130 lbs.                                               155 lbs.
                   Optional                                              Optional

ADDITIONAL FEATURES:                                 ADDITIONAL FEATURES:
• Digital temperature display and control.           • Digital temperature display and control.
• Air cooled or water cooled models                  • Air cooled or water cooled models
• Available with second pump and motor.              • Available with second pump and motor.
• Lift off refrigeration system for easy service.    • Lift off refrigeration system for easy service.
• Optional second pump and motor.                    • Second pump and motor included.
                                                     • Maximum pumps: up to 4.



Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                             5
 Dispense Systems
 Wall Mounted Direct Draw
 Dispensing Directly Through a Wall
 A walk-in cooler stores both the kegs and the beer lines for delivery of product to shanks
 mounted directly through a wall. A drip tray mounts to the outside wall to contain any
 spillage. Beer is dispensed at the same temperature it is stored in the walk-in.


 PERFORMANCE TIP:
 The walk-in should be dedicated to keg beer, with a minimum amount of walk-in traffic
 in order to maintain keg temperature.

                                                                                              Shanks: Connects to
                                                  In-Place Cleaning System:                   faucet and beer line allowing
                                                  Save beer and increase profits by           beer to be dispensed through
                                                  cleaning your own lines when a              walk-in cooler wall.
                                                  keg empties.
                                                                                                                    Evaporator Unit:
                                                                                                                    Creates refrigerated air
                Secondary Regulators:                                                                               for walk-in cooler.
                Regulates gas pressure to
                each product’s specification.
                                                                                                                                               50 Litre
                                                                                                                                               Cleaning
                                                                                                                                               Bottle: One
                                                                                                                                               bottle contains
       Gas Line:                                                                      Coupler:                                                 cleaning chemicals
       Transfer                                                                       Dispense head                                            and one contains
       source for                                                                     for tapping kegs.                                        rinse water for the
       blended gas.                                                                                                                            “In-Place Cleaning
                                                                                                                                               System.”

                                                                                             Keg Stacker:
CO2 Purifier:                                                                                Saves space while
Eliminates                                                                                   allowing two kegs in
contaminants in                                                                              series to be tapped.
CO2 source.


                                                                                      Beer Hose:
                                                                                      Transfer source
                                                                                      for beer.


CO2
Regulator:                                                 Kegs:
                                                           Contains beer
Regulates the
                                                           under pressure.
CO2 from the
cylinder.

                          CO2 Cylinder:                                  Walk-in Cooler
                          Storage for bulk CO2.
                          Positioned outside of
                                                                    Inside Connection View
                          walk-in cooler




  6                                                 Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Dispense Systems
Wall Mounted Direct Draw
Dispensing Directly Through a Wall
Straight-forward dispensing: Shanks and
faucets are mounted through drip tray
right into walk-in. Direct Draw Systems
offer the benefit of no hidden lines,
making service and access easier.

      Wall Mount
      Drip Tray
                       Drain Pipe: Connects to
                       wall mounted drip tray allowing
                       beer disposal.



                                                                                       50 Litre Cleaning
 Faucets:    Dispenses beer.
                                                                                       Bottle: One bottle contains
 Available in stainless steel,
                                                                                       cleaning chemicals and one
 chrome plated, gold plated
                                                                                       contains rinse water for the
 and polished brass.
                                                                                       “In-Place Cleaning System.”
                                           Shank




                                                          Floor Drain:                  Walk-in Cooler
                                                          Drains beer from
                                           Beer Hose      wall mounted             Outside Connection View
                                                          drip tray.
                                                Walk-in
       Wall Mount
                                                Wall
       Drip Tray                 Wall
                                                                                         Walk-in Cooler
                                                                                      Side Connection View

                                                                                              Beer Hose
                                                                         Faucet


PERFORMANCE TIP:
Keep wall thickness to a minimum so that the
shank does not warm up in the uninsulated                                                             CO2 Cylinder
space. Also, use a longer shank, exposed on
the inside of the walk-in in order to conduct
cold to the faucet.


                                                                             Keg




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                          7
Dispense Systems
Gas Blenders
We recommend using a gas blender on all systems for these reasons:
• Accurate gas blend to within 2%.
• Each unit is tested and calibrated.
• Blending is tamperproof.
• Blending operation shuts down when gas cylinders are empty

Proven results for the bar owner:
• Save money by not buying expensive premixed cylinders.
• Save labor by not changing cylinders as often.
• Increase profits by serving a consistent perfect pint.

Available blends:
• Stouts: 25% CO2 with 75% Nitrogen                                                           TM100
• Lagers: 60% CO2 with 40% Nitrogen
• Custom Blends: Available, fast delivery

PRO-LINE GAS BLENDER
Easy installation: just mount on the wall and connect the gas lines,
the outlet pressure is factory preset at 50 PSI. No user adjustment
prevents unwanted tampering and unnecessary service calls. Best
blender pricing in the industry!

 Part No.   Description             Blends
 TM100      Single Blending Panel   60% CO2 / 40% N2
 TM200      Double Blending Panel   25% CO2 / 75% N2 & 60% CO2 / 40% N2




                                                                                              TM200



Brewery Approved Trunk Lines
Taste Rite Insulated Taped Bundles

 Part No.       Description
 4747-060TC     3/8", 4 Product / 2 Glycol
 4747-080TC     3/8", 6 Product / 2 Glycol
 4747-100TC     3/8", 8 Product / 2 Glycol
 4747-120TC     3/8", 10 Product / 2 Glycol
 4747-140TC     3/8", 12 Product / 2 Glycol
*5/16" available upon request.




8                                       Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Cylinders
Aluminum Cylinders
CO2 Nitrogen and beer gas cylinders*, made in the U.S.A.

 Part No.     Description                    Gas
 B5           5 pound                        CO2, Nitrogen, Beer Gas
 B10          10 pound                       CO2, Nitrogen, Beer Gas
 N6           6 cu.                          CO2, Nitrogen, Beer Gas
 N15          15 cu.                         CO2, Nitrogen, Beer Gas
 N22          22 cu.                         CO2, Nitrogen, Beer Gas
 N24          24 cu.                         CO2, Nitrogen, Beer Gas
 N60          60 cu.                         CO2, Nitrogen, Beer Gas
 N90          90 cu.                         CO2, Nitrogen, Beer Gas
*Carry handle can be added to any cylinder.




 Draft Beer Facts
Aluminum CO2 cylinder or tank sizes
    Liquid
   Capacity Diameter*               Height* Empty Weight
  (U.S. Lbs.) in Inches            in Inches In Pounds
       2.5              5              13              5
        5               6               9              8
       10               7              21              16
       20               8              28              21
       50               8              53              54

* All dimensions rounded to the next highest integer




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   9
Couplers
American “D” System with Probe Seal
SAFE
All Draught Technologies Keg Couplers are equipped
with internal safety relief devices, which when
functioning with other relief devices in the
system, will prevent a keg from reaching
pressures in excess of recommended working
pressure. This relief device will also allow the
user to relieve pressure in order to prevent or correct
dispense problems.
                                                                  DTC300
EFFICIENT
Designed for maximum flow in either single or series
keg dispensing. Specially designed backflow
check valve prevents the back-up of liquid
into the gas line and eliminates the
need for a coupling washer between
the nut and coupler body.                                                               DTC303

RELIABLE
Unlike the competition, all
Draught Tech couplers
come with stainless
steel hinge screws to
prevent rusting and
sticking and allow for
quick and easy cleaning without
the need for any special tools.             DTC302



FITS ON ALL 1/6-1/4-1/2 BARRELS

                                                                                                 DTC306




 Part No.      Description                           System   DTC301

 DTC300        Blue Handle                             D
 DTC301        Black Handle                            D
 DTC302        Red Handle                              D
 DTC303        Gold Handle                             D
 DTC3044SS     Grey Handle Stainless Steel Probe      D5
 DTC306        White Handle                            D

“D” System Valve
See Keg Valve Master List on page 12.                                                        DDTC304SS




10                                      Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Couplers
American “D” System with Probe Seal




                             Part No.     Description
                             3008PA-1     Handle Assembly, Blue
                             3008PA-2     Handle Assembly, Black
                             3008PA-3     Handle Assembly, Red
                             3008PA-5     Handle Assembly, Gray
                             3004         Ball Retainer
                             3005         Check Ball
                             3009P        “D” System Probe
                             3017         Probe O-Rings (3 required)
                             4019         Probe Seal – D System
                             3015         Hex Nut
                             3014         Hose Nipple
                             3006         Check Valve
                             3007PA       Body
                             3012         Stainless Steel Hinge Pin
                             3001         Body Seal
                             1014PA       Safety Valve Assembly


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   11
Couplers
European “S” System with Probe Seal
SAFE, EFFICIENT AND RELIABLE
The same great design as the American “D” coupler, Draught
Technologies European Sankey is designed and manufactured
for years of trouble-free service. Durable hard nickel plating
on the body, handle and probe is resistant to chemicals and
won’t chip. A stainless steel hinge pin will last and last and
won’t corrode like cold rolled steel. Available in black or red
for easy identification.
FITS ON ALL 1/6-1/4-1/2 BARRELS

 Part No.         Description               System
 DTC310           Black Handle                  S
                                                                                                          DTC310
 DTC312           Red Handle                    S

“S” System Valve
See Keg Valve Master List below.




                                                                                                                            DTC312
 Key Valve Master List
  KEY:                                  Coors .............................D   McSorley's .....................HS      Red Hook .......................D
  D = American Sankey                   Coors Light .....................D     Michael Shea's.................D        Red Wolf ........................D
  S = European Sankey                   DAB ...............................S   Michelob ........................D      Rouge ............................D
                                        Dos Equis .......................D     Michelob Light ................D        Rolling Rock ...................D
  HS = Hoff Stevens
                                        Double Diamond...............S         Michelob Specialty ...........D         Samuel Adams .................D
  A = German Slider                     Fosters ...........................D   Middle Ages ....................D       Saranac ..........................D
  G = Bass/Caffrey’s                    Fullers............................G   Miller .............................D   Schaeffer ......................HS
  U = Guinness/Harp                     Genesee .........................D     Milwaukee's Best..............D         Schlitz..........................HS
                                        Guinness ........................U     Molson ...........................D     Scottish New Castle ..........S
 Bass Ale .........................G    Hacker-Pschorr ................A       Moosehead......................D        Shipyard.........................D
 Beamish .........................S     Heineken ........................S     Murphy's Irish Stout ........S          Sierra Nevada ..................D
 Becks .............................S   High Falls .......................D    Natural Ice .....................D      South Paw Light ..............D
 Blue Moon ......................D      Hoegaarden.....................S       Natural Light...................D       Spaten ...........................A
 Boddingtons ...................U       Hornsby's........................D     New Amsterdam .............HS           St. Pauli Girl....................S
 Breckenridge ...................D      Ice House .......................D     O'Doul's ..........................D    Stella Artois ....................S
 Brooklyn Breweries...........D         Iron City.......................HS     Old Milwaukee ...............HS         Strohs ..........................HS
 Bud Ice ..........................D    Ithaca ..........................HS    Old Speckled Hen.............U          Warsteiner ......................A
 Bud Light .......................D     John Courage ..................S       Old Vienna......................D       Watney's .........................G
 Budweiser.......................D      JW Dundee....................HS        Pabst .............................D    Weinhard's ......................D
 Busch ............................D    Killian's Red ....................D    Paulaner .........................A     Woodpecker.....................S
 Caffrey's .........................G   Labatt Blue.....................D      Pete's Wicked ..................D       Yuengling .......................D
 Carlsberg ........................D    Lowenbrau ......................S      Pilsner Urquell .................S      Zebra............................HS
 Cider Jack.......................D     McEwan's ........................S     Red Dog .........................D




12                                                  Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Couplers
European “S” System Replacement Parts




BEER FACT: Unlike wines, most              Part No.     Description
beers should be stored upright to          3008PA-2     Handle Assembly, Black
minimize oxidation and metal or            3008PA-3     Handle Assembly, Red
plastic contamination from the             3004         Ball Retainer
cap. High-alcohol ales, however,           3005         Check Ball
which continue to ferment in their         3010P        “S” System Probe
corked bottles, should be stored on        3017         Probe O-Rings (3 required)
their sides.                               3022         Probe Seal – “S” System
                                           3015         Hex Nut
                                           3014         Hose Nipple
                                           3006         Check Valve
                                           3007PA       Body w/PRV & Body Seal
                                           3012         Stainless Steel Hinge Pin
                                           3001         Body Seal
                                           1014PA       Safety Valve Assembly



Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com         13
Couplers
European “U, G and A” System with Probe Seal
Like all Draught Tech products, our European Import style couplers are
manufactured to the highest quality standards for years of reliable service.
Many of the items on these couplers are completely interchangeable with
the Draught Tech D and S system couplers. This means fewer spare parts in
your kit and less guesswork during repairs.


All Draught Technologies European style couplers are made with stainless
steel probes for durability and service.

 Part No.       Description                      System
 DTC340U        Guinness/Harp/Boddington            U
 DTC330G        Bass/Caffreys                       G
 DTC320A        Warsteiner/Spaten/Paulaner          A                                           DTC340U


See Keg Valve Master List on page 12 for a detailed list
of beers and their valves.




                          “U” System
                                                                 DTC330G

                                                                                            DTC320A


                                                    Draft Beer Facts
                                                        CASES PER 1/2 BBL BY PACKAGE SIZE
                                                        12 oz. Package (24-12 oz.) = 6.888 Cases per 1/2 bbl
       “G” System
                                                        16 oz. Package (24-16 oz.) = 5.166 Cases per 1/2 bbl
                                                        32 oz. Package (12-32 oz.) = 5.166 Cases per 1/2 bbl

                                                        WEIGHT OF DRAFT BEER
                                                        One Ounce of Draft Beer by Volume = One Ounce by Weight


                           “A” System                   FOAM
                                                        Foam is approximately 25% beer, 75% carbon dioxide



14                                      Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Couplers
European “U, G, and A” Systems Replacement Parts




                                                                               Part No.   Description
             DTC340U Spare Parts                                               3004       Ball Retainer
                                                                               3005       Check Ball
                                                                               3012       Hinge Pin, Stainless Steel
                                                                               3401       “U” Probe, Stainless Steel
                                                                               3301       “G” Probe, Stainless Steel
                                                                               3201       “A” Probe, Stainless Steel
                                                                               3202       Probe O-Rings (2 required)
                                                                               3204PA     Handle Assembly, Black
                                                                               3006       Check Valve
                                                                               3014       Hose Nipple
                                   DTC320A Spare Parts                         3400       “U” Coupler Forged Body
                                                                               3300       “G” Body
                                                                               3200       “A” Coupler Forged Body
                                                                               1014PA     Safety Valve Assembly
                                                                               3015       Hex Nut
                                                                               3203       “A” and “G” Bottom Seal
                                                                               3403       “U” CO2 Seal




                    DTC330G Spare Parts


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                           15
Primary CO2 Regulators
Setting the standard in quality and performance
PRESSURE REGULATORS WITH INTEGRAL RELIEF VALVE
Draught Technologies CO2 Regulators are manufactured for use with
beverage dispensing systems that require compressed gas at a variable
flow and constant pressure.
INCREASED FLOW RATE
A larger internal orifice allows better downstream flow with less                      DTR1001
freezing in high volume applications.
SETTING THE STANDARD FOR QUALITY
Draught Technologies regulators conform to UL252 standards and are
marked with the UL Label. Every Draught Technologies regulator is
subject to four separate quality tests before shipping, ensuring that
the product you receive is the best in the industry.
OTHER CONFIGURATIONS AVAILABLE UPON REQUEST

                                                                                         DTR1002
 Part No.     Description                      Gas
 DTR1001      Single Gauge                     CO2
 DTR1002      Dual Gauge                       CO2
 DTR1002H     Dual Gauge, 0-100psi             CO2
 DTR1008      Gaugeless                        CO2
 DTR1002-2    Dual Gauge, Dual Outlet          CO2
 DTR1022      Two Pressure, Two Product        CO2




                                                                           DTR1022




        DTR1002-2




                                                                                                    DTR1008
                                            DTR1002H
                                            0-100 PSI




16                                      Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Primary CO2 Regulators
Primary CO2 Regulator Replacement Parts




                           Part No.     Description
                           1000P        Forged Body LHT
                           1026         Shut-Off Valve with Check
                           1010         Seat Cartridge (with O-Rings)
                           1002         CO2 Diaphragm
                           1007         Bonnet Gasket
                           1003         Diaphragm Seat
                           1005         Bonnet Spring 0-60psi
                           1005HP       Bonnet Spring 0-100psi
                           1006         Adjusting Screw Button
                           1001-1A      Bonnet, Blue Assembly
                           1020         CGA 320 CO2 Nut
                           1025A        CO2 Nipple
                           1024         CO2 Quad Ring
                           1017         Gauge 0-60psi RHT
                           1018         Gauge 0-3000psi LHT
                           1019         Gauge 0-100psi RHT




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   17
Secondary CO2 Regulators
Setting the standard in quality and performance
PRESSURE REGULATORS WITH INTEGRAL RELIEF VALVE
Draught Technologies CO2 Regulators are manufactured for use with
beverage dispensing systems that require compressed gas at a variable
flow and constant pressure.
INCREASED FLOW RATE
A larger internal orifice allows better downstream flow with less
freezing in high volume applications.
                                                                                                     DTR1100
SETTING THE STANDARD FOR QUALITY
                                                                                       DTR1101
Draught Technologies regulators conform to UL252 standards and are
marked with the UL Label. Every Draught Technologies regulator is
subject to four separate quality tests before shipping, ensuring that
the product you receive is the best in the industry.

 Part No.        Description                              Gas
 DTR1100         Body Only                                CO2
 DTR1101         Single Gauge with Shut-Off               CO2
 DTR1101H        Single Gauge 0-100psi                    CO2
 DTR1101HP       Single Gauge with Pass-Through           CO2
                                                                                      DTR1101H
 DTR1104         Single Gauge less Inlet and Nipple       CO2                          0-100psi




BEER FACT: Despite the month
implied by its name, Munich's
annual 16-day Oktoberfest
actually begins in mid-September                                    DTR1101HP
and ends on the first Sunday in
October.


                                              DTR1104




18                                    Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Secondary CO2 Regulators
Setting the standard in quality and performance
PRESSURE REGULATORS WITH INTEGRAL RELIEF VALVE
Draught Technologies CO2 Regulators are manufactured for use with                        DTR1122
beverage dispensing systems that require compressed gas at a variable
flow and constant pressure.
INCREASED FLOW RATE
A larger internal orifice allows better downstream flow with less
freezing in high volume applications.
SETTING THE STANDARD FOR QUALITY
Draught Technologies regulators conform to UL252 standards and are
marked with the UL Label. Every Draught Technologies regulator is
subject to four separate quality tests before shipping, ensuring that
the product you receive is the best in the industry.

 Part No.        Description                              Gas
 DTR1122         Two Pressure, Two Product                CO2
 DTR1133         Three Pressure, Three Product            CO2
 DTR1144         Four Pressure, Four Product              CO2
 DTR1155         Five Pressure, Five Product              CO2                  DTR1133


ALL REGULATORS ARE AVAILABLE STANDARD
OR HIGH PRESSURE WITH PLUG OR PASS-THROUGH




                                                                                    DTR1144




                                                                    DTR1155




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                       19
Panel Mounted CO2 Regulators
Installation Ready, Walk-in Cooler Kits

Part No.           Description                     Gas
DTR1122PM          Two Pressure, Two Product       CO2
DTR1133PM          Three Pressure, Three Product   CO2
DTR1144PM          Four Pressure, Four Product     CO2




           Fittings Included:
           3/8" Barb Nipple
           Stepless Gas Clamps
           Neoprene Washers
           Jumper Hoses
           3/8" I.D. S/S Tailpieces
           3/8" I.D. Vinyl Hose




                                                                                                   3/8" I.D. Stainless
                                                                                                   Steel Tailpieces

                    5/16" I.D. Gas Hoses
                                                                                                        Stainless Steel
                                                                                                        Wall Brackets




20                                         Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Secondary CO2 Regulators
Secondary CO2 Regulator Replacement Parts




                Part No.     Description
                1000S        Forged Body RHT
                1026         Shut-Off Valve with Check
                1010         Seat Cartridge
                1002         CO2 Diaphragm
                1007         Bonnet Gasket
                1003         Diaphragm Seat
                1005         Bonnet Spring, 0-60psi
                1005HP       Bonnet Spring, 0-100psi
                1006         Adjusting Screw Button
                1001-1A      Bonnet, Blue Assembly
                1017         Gauge, 0-60psi
                1032         Wall Bracket Screw
                1033         Wall Bracket Washer
                1031         Wall Bracket, Stainless Steel
                1010-8       Seat O-Ring, Small
                1010-9       Seat O-Ring, Large
                1030         5/16" Hose Barb
                1029         1/4" Plug RHT
                1034*        Mounting Bracket Lock Washer
                1035*        RHT Close Nipple



Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   21
Primary Nitrogen Regulators
Setting the standard in quality and performance
PRESSURE REGULATORS WITH INTEGRAL RELIEF VALVE
Draught Technologies Nitrogen Regulators are manufactured for use
with beverage dispensing systems that require compressed gas at a
variable flow and constant pressure.
INCREASED FLOW RATE
A larger internal orifice allows better downstream flow with less                         DTR1201
freezing in high volume applications.
SETTING THE STANDARD FOR QUALITY
Draught Technologies regulators conform to UL252 standards and are
marked with the UL Label. Every Draught Technologies regulator is
subject to four separate quality tests before shipping, ensuring that
the product you receive is the best in the industry.
OTHER CONFIGURATIONS AVAILABLE UPON REQUEST

 Part No.           Description                         Gas                                  DT1202

 DTR1201            Single Gauge                     Nitrogen
 DTR1202            Dual Gauge                       Nitrogen
 DTR1202H           Dual Gauge, 0-100psi             Nitrogen
 DTR1208            Gaugeless                        Nitrogen
 DTR1202-2          Dual Gauge, Dual Outlet          Nitrogen
 DTR1222            Two Pressure, Two Product        Nitrogen




                                                                              DTR1222




        DTR1202-2




                                                                                                       DTR1208
                                                DTR1202H
                                                0-100 PSI




22                                         Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Primary Nitrogen Regulators
Primary Nitrogen Regulator Replacement Parts




                       Part No.     Description
                       1000P        Forged Body LHT
                       1026         Shut-Off Valve with Check
                       1010         Seat Capsule and Spring Assy.
                       1002         CO2 Diaphragm (One Piece)
                       1007         Bonnet Gasket
                       1003         Diaphragm Seat
                       1005         Bonnet Spring, 0-60psi
                       1005HP       Bonnet Spring, 0-100psi
                       1006         Adjusting Screw Button
                       1001-3A      Bonnet, Yellow Assembly
                       1220         CGA 580 CO2 Nut
                       1222         Nitrogen Nipple
                       1224         Nitrogen O-Ring
                       1017         Gauge, 0-61psi RHT
                       1018         Gauge, 0-3000psi LHT
                       1010-8       Seat O-Ring, Small
                       1010-9       Seat O-Ring, Large




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   23
Free-Flow Faucets
Polished Chrome, Gold Plated, Stainless Steel
Draught Technologies Free-Flow Faucets are designed
for long, reliable and carefree service
• Polished Chrome, Gold Plated Body
• Matching Plated or Stainless Steel Shaft Assembly
• Brass or Stainless Steel Lever
• Quick opening for smooth operation
• Vent port eliminates trapped beer in spout
• Simple to install, fits all standard shanks                                             DTF500

• Disassembles in seconds for easy cleaning

 Part No.          Description
 DTF500            Chrome with Brass Lever
 DTF501            Chrome with Stainless Steel Lever
 DTF502            Gold Plated with Brass Lever
 DTF503            Gold Plated with Stainless Steel Lever


                                                                                                     DTF501




                                                                            BEER FACTS: In 1965, a Belgian royal
                                                                            decree mandated that lambics must
                                                                            contain a minimum of 35% wheat. It
                                                                            also ordered that labels state the name
                                                                            and location of the brewery.

                                                                            Belgium, a country about the size of
          DTF502
                                                                            Ohio, has about 100 breweries, offering
                                                                            over 500 different types of beer.




                                             DTF503




24                                           Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Free-Flow Faucets
Free-Flow Faucet Replacement Parts

                                                       Part No.     Description
                                                       5012         Faucet Bonnet, Chrome
                                                       5013         Faucet Bonnet, Gold
                                                       5007         Faucet Collar, Chrome
                                                       5008         Faucet Collar, Gold
                                                       5010         Friction Washer
                                                       5006         Ball Washer
                                                       5001         Faucet Lever, Brass
                                                       5001SS       Faucet Lever, Stainless Steel
                                                       5000-1       Faucet Body, Chrome
                                                       5000-2       Faucet Body, Gold
                                                       5004         Shaft Assembly, Chrome
                                                       5005         Shaft Assembly, Gold
                                                       5009         Faucet Body Gasket
                                                       5002         Faucet Shaft, Chrome
                                                       5003         Faucet Shaft, Gold
                                                       5014         Faucet Shaft Seat
                                                       5011         Faucet Shaft Nut
                                                       5011SS       Faucet Shaft Nut, Stainless Steel
                                                       6529         Spanner Wrench




                                                                                            BEER FACT: Around 90%
                                                                                            of beer sold in the United
                                                                                            Kingdom is produced in
                                                                                            the United Kingdom.




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                      25
Stout and Ale Faucets
Polished Chrome or Gold Plated
Draught Technologies Stout and Ale Faucets are designed
for long, reliable and carefree service
• Polished Chrome or Gold Plated Body with Stainless Steel Spout

 Part No.          Description
 DTF535            Chrome with Stainless Steel Spout
 DTF530            Gold Plated with Stainless Steel Spout



                                                                                                              DTF535




 Draft Beer Facts
  TYPICAL KEGS USED IN THE U.S.                                                                                    DTF530
     ⁄2 Barrel Keg .............Type of Keg ..............1⁄4 Barrel Keg
     1


         231⁄4 inches .....................Height .......................133⁄4 inches
         17.0 inches ....................Diameter .....................17.0 inches
         1984 ounces ...................Contents......................994 ounces
     160.5 pounds .................Full Weight ...................82.2 pounds
         29.7 pounds ................Empty Weight .................17.3 pounds
     130.8 pounds ................Beer Weight...................64.9 pounds
             29°F .....................Freezing Point ......................29°F
                                                                                        BEER FACT: Bottle caps, or “crowns,” were
                                                                                        invented in Baltimore in 1892 by William
  CONVERSION TABLES                                                                     Painter who proved his invention’s worth
  Keg Size ............# of Gallons....# of Ounces ....Metric Equiv.                    after convincing a local brewer to ship a
  One Full bbl .............31 gallons .......3968 ounces .....107.348 liters
                                                                                        few hundred cases of beer to South America
                                                                                        and back. They returned without a leak.
  One Half bbl ...........15.5 gallons ......1984 ounces .......58.674 liters
  One Quarter bbl.......7.75 gallons.......992 ounces ........29.337 liters
                                                                                        BEER FACT: Draft beer is almost always
                                                                                        un-pasteurized and therefore is more
  Always use brewery-approved beer line if you want to have foam-                       fragile. It should be consumed after being
  free, great tasting beer. Serving it through a plastic tube from the                  “tapped,” and is generally truer to the
  hardware or discount store has spoiled many a great beer. If you                      flavors of the ingredients as pasteurization
  use the plain vinyl tubing in your beer tap system, you will wind
  up with a foamy, off-tasting beer.
                                                                                        exposes the beer to heat and changes the
                                                                                        flavor profile.




26                                                 Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Stout and Ale Faucets
Stout and Ale Faucet Replacement Parts


 Part No.       Description
 5305           Lever, Chrome Plated
 5304           Lever, Gold Plated
 5309           Hinge Pin, Stainless Steel
 5314           Bonnet Cap
 5315           Bonnet Cap O-Ring
 5303           Bonnet, Chrome Plated
 5302           Bonnet, Gold Plated
 5308           Shaft Spring
 5306           Stainless Steel Shaft
 5312           Shaft O-Ring, Small
 5313           Shaft O-Ring, Large
 5301           Faucet Body, Chrome
 5300           Faucet Body, Gold Plated
 5310           Outlet and Spout O-Ring
 5317           Restrictor Disc
 5318           Flow Straightener
 5316           Stainless Steel Spout
 5316G          Stainless Steel Spout, Gold Plated
 5319*          Knurled Lock Nut
 5319C*         Knurled Lock Nut, Chrome
*Not pictured




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   27
Air Distributors – Modular
Modular Brass with Wall Mount Bracket
 Part No.   Description
 DTM1402S   2-Way Manifold with Safety
 DTM1403S   3-Way Manifold with Safety
 DTM1404S   4-Way Manifold with Safety
 DTM1405S   5-Way Manifold with Safety                                                        DTM1402S
 DTM1406S   6-Way Manifold with Safety (not pictured)

 Part No.   Description
 DTM1402    2-Way Manifold with Pass Through
 DTM1403    3-Way Manifold with Pass Through
 DTM1404    4-Way Manifold with Pass Through
 DTM1405    5-Way Manifold with Pass Through
 DTM1406    6-Way Manifold with Pass Through (not pictured)                                    DTM1402




                  DTM1403S                                                         DTM1404S




                  DTM1403                                                           DTM1404




                             DTM1405S




                                                                               DTM1405


28                                      Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Air Distributors – Aluminum
Modular Brass with Wall Mount Bracket
 Part No.    Description                    Part No.   Description
 DTM1502     2-Way Manifold                 DTM1502S   2-Way Manifold with Safety
 DTM1503     3-Way Manifold                 DTM1503S   3-Way Manifold with Safety
 DTM1504     4-Way Manifold                 DTM1504S   4-Way Manifold with Safety
 DTM1505     5-Way Manifold                 DTM1505S   5-Way Manifold with Safety




                    DTM1502S                                                        DTM1502




                   DTM1503S                                                     DTM1504S




                   DTM1503                                                          DTM1504




                               DTM1505S




                                                                            DTM1505


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                  29
Picnic Pumps
Low Profile, High Performance
IMPROVED DESIGN FOR INCREASED RELIABILITY
Draught Technologies pumps are the next generation of low profile pumps
offering the best in quality service and reliability. Made from improved
high-impact polycarbonate, these pumps will offer years of carefree service
leading to increased enjoyment of draft beer parties, picnics or holiday
gatherings. Now you can enjoy draft beer almost anywhere.


Choose from Wing, Lever or Economy pumps, all with increased
displacement for less pumping.


• Lever action tapping – maximum air volume
• “No Foam” pressure relief button – product identification
• “Circle Serve” dispensing – handy size and weight
• Easy cleaning
                                                                                         DTP400

 Part No.          Description     System
 DTP400            Supreme Pump         D
 DTP420            Mustang Pump         D
 DTP410            Patriot Pump         D




      “D” System
                                                                                                    DTP410




“D” System Valve
See Keg Valve Master List on page 12.
                                                                                    BEER FACT: The familiar
                                             DTP420
                                                                                    Bass symbol, a red triangle,
                                                                                    was registered in 1876
                                                                                    and is the world’s oldest
                                                                                    trademark.

30                                   Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Picnic Pumps
                                                                 MUSTANG AND PATRIOT PUMP
                                                                 REPLACEMENT PARTS
                                                                   Part No.    Description
                                                                   4101        Piston Assembly
                                                                   4102        Piston Lock Ring
                                                                   4003        Piston Quad Ring
                                                                   4004        Piston Spring
                                                                   4200        Mustang Body, Plastic
                                                                   4201        Mustang Body, Chrome
                                                                   1012        Beer Seal
                                                                   4207        Air Seal
                                                                   4202        Coupling Nut
                                                                   4204        Probe
                                                                   4203        Hinge Pin
                                                                   4208PA      Handle Assembly
                                                                   4017        Pump Body O-Rings
                      Supreme Pump
                                                                   3001        Bottom Seal
                                                                   4022        24" Beer Hose
                                                                   4023        Plastic Pump Faucet
                                                                   4111        Check Valve Retaining Ring
                                                                   4010        Duckbill Check Valve
                                                                   4100        Patriot Body, Plastic
                                                                   4110        Probe Seal
                                                                   4109        Umbrella Seal

                                                                  SUPREME PUMP REPLACEMENT PARTS
                                                                   Part No.    Description
                                                                   4001-1      Pump Cap
                                                                   4002-1      Piston
                                                                   4004        Piston Spring
                                                                   4005        Plate Screws
                      Mustang Pump                                 4006        Pump Plate
                                                                   4008-1      Supreme Pump Body
                                                                   4009        Pump Spacer
                                                                   4011        Probe
                                                                   4013        Outlet Nipple
                                                                   4012        Safety Assembly
                                                                   4019        Probe Washer
                                                                   4014-1A     Handle Assembly
                                                                   4015        Pump Retaining Ring
                                                                   4016        Handle Spring
                                                                   4018        Pump Body Chrome
                                                                   4017        Body O-Rings (2 Required)
                                                                   3001        Bottom Seal
                                                                   4022        24" Beer Hose
                                                                   4023        Plastic Pump Faucet
                                                                   4010        Duckbill Check valve (not pictured)
            Patriot Pump                                           4003        Piston Quad Ring (not pictured)


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                     31
Sanitizers and Detergents
         B-T-F® IODOPHOR SANITIZER                                     Part No.     Size       Qty
         For food and beverage service. Use in last tank or            11000       4.0 oz.     50
         automatic ware washing machines with low temperature          11001      16.9 oz.     24
         sanitizing rinse. Great for brewing sanitation.               11002      32.0 oz.     12
                                                                       11003       1 Gal.       4
                                                                       11004       5 Gal.       1
                                                                       11005      15 Gal.       1
                                                                       11006      30 Gal.       1
                                                                       11007      55 Gal.       1

          B-T-F® QA® CONCENTRATED SOLUTION                             Part No.     Size       Qty
          All purpose liquid sanitizer, disinfectant and deodorizer.   11010       4.0 oz.     50
                                                                       11012      32.0 oz.     12
                                                                       11013       1 Gal.       4
                                                                       11014       5 Gal.       1
                                                                       11015      15 Gal.       1
                                                                       11016      30 Gal.       1
                                                                       11017      55 Gal.       1

          B-T-F® CHLOROMELAMINE SANITIZER                              Part No.      Size      Qty
          Odorless, tasteless chlorine powder. Great for beverage      12000       2.25 oz.    100
          glasses. Built-in water conditioners prevent spotting.       12001      16.75 oz.     12

          B-T-F® CHLOR-TAB® SANITIZER                                  Part No.    Size        Qty
          Pre-measured portion control chlorine tablet sanitizer.      13000       5 tab       100
          For food and beverage service.                               13002      100 tab      12

          B-T-F® CHLOROMELAMINE SANITIZER POUCH PACKET                 Part No.     Size       Qty
          Pre-measured portion control powder sanitizer in pouch.      14001       72 ct.      12

          T-D-C® TRIPLE-DUTY LIQUID CONCENTRATE                        Part No.     Size       Qty
          Concentrated liquid to wash glassware by hand with           21000       4.0 oz.     50
          fixed/stationary brushes. Contains lime solvents and         21002      32.0 oz.     12
          water softeners.                                             21004       5 Gal.       1
                                                                       21005      15 Gal.       1.
                                                                       21006      30 Gal.       1
                                                                       21007      55 Gal.       1

          L-f-D® LOW FOAMING LIQUID DETERGENT                          Part No.     Size       Qty
          Concentrated liquid to wash glassware with automatic         21010       4.0 oz.     50
          glass washing machines and electric whirling brush           21012      32.0 oz.     12
          glass washer.                                                21014       5 Gal.       1
                                                                       21015      15 Gal.       1
                                                                       21016      30 Gal.       1
                                                                       21017      55 Gal.       1




32                      Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Detergents
BLUE MAGIK® LIQUID LIME-SOLV DETERGENT                        Part No.     Size     Qty
For washing glassware by hand with fixed/stationary           21020      4.0 oz.    50
brushes. Contains lime solvents and water softeners.          21023       1 Gal.     4
                                                              21024       5 Gal.     1
                                                              21025      15 Gal.     1
                                                              21026      30 Gal.     1
                                                              21027      55 Gal.     1

INJECT® LIQUID AUTOMATIC DETERGENT                            Part No.     Size     Qty
Heavy duty liquid detergent for use in automatic glass        21031      16.9 oz.   24
washing and dish washing machines.                            21033       1 Gal.     4
                                                              21034       5 Gal.     1
                                                              21035      15 Gal.     1
                                                              21036      30 Gal.     1
                                                              21037      55 Gal.     1

T-D-C® TRIPLE-DUTY CONCENTRATE POWDER                         Part No.     Size     Qty
Powder for washing glassware by hand with fixed/              22000      2.25 oz.   100
stationary brushes. Water softeners leave glasses spotless.   22001       25 oz.     12

T-D-C® TRIPLE-DUTY CONCENTRATE POWDER                         Part No.     Size     Qty
For washing glassware by hand with fixed/stationary           22000      2.25 oz.   100
brushes. Water softeners leave glasses spot free.             22001       25 oz.     12

T-D-C® TAB-DET® DETERGENT                                     Part No.    Size      Qty
Pre-measured, portion control tablet detergent to             23000       5 tab     100
wash glassware by hand with fixed/stationary brushes.         23002      100 tab     12

L-f-D® TAB DETERGENT TABLET                                   Part No.    Size      Qty
Pre-measured, portion control tablet detergent to             23010       5 tab     100
wash glassware with automatic machines.                       23012      100 tab     12

T-D-C® TRIPLE-DUTY                                            Part No.     Size     Qty
CONCENTRATE DETERGENT POUCH                                   24001       72 ct.    12
Pre-measured, portion control powder detergent to
wash glassware by hand with fixed/stationary brushes.

L-f-D® LOW FOAMING DETERGENT POUCH                            Part No.     Size     Qty
Pre-measured, portion control powder detergent to             24011       72 ct.    12
wash glassware with automatic machines.




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com              33
Line Cleaners
        B-L-C® BEER LINE CLEANER                                     Part No.       Size        Qty
        Concentrated liquid cleaner for beer and beverage lines.     31000         4.0 oz.      50
        Works in all varieties of cleaning equipment (pumps,         31002        33.0 oz.      12
        pressure tanks, etc.)                                        31004         5 Gal.        1
                                                                     31005        15 Gal.        1
                                                                     31006        30 Gal.        1
                                                                     31007        55 Gal.        1

        B-L-C® BEER LINE CLEANER LONG LINE FORMULA                   Part No.       Size        Qty
        Concentrated liquid cleaner for longer beer and              31012        33.0 oz.      12
        beverage systems. Contains additional cleaning
        power to compensate for greater length.


        B-L-C® BEER LINE CLEANER REFRIGERATED                        Part No.       Size        Qty
        LINE FORMULA                                                 31022         33 oz.       12
        Concentrated liquid cleaner for beer and
        beverage system with constant refrigeration


        PENETRATE®                                                   Part No.       Size        Qty
        Concentrated liquid to wash glassware by hand with           31030         4.0 oz.      50
        fixed/stationary brushes. Contains lime solvents and         31032        33.0 oz.      12
        water softeners.                                             31034         5 Gal.        1
                                                                     31035        15 Gal.        1.
                                                                     31036        30 Gal.        1
                                                                     31037        55 Gal.        1

        D-A-C® DOUBLE ALKALINE CLEANER                               Part No.       Size        Qty
        Very powerful liquid cleaner for beer and beverage           31040         4.0 oz.      50
        systems. Formulated with twin alkaline compounds for         31042        33.0 oz.      12
        cleaning problematic systems.                                31044         5 Gal.        1
                                                                     31045        15 Gal.        1.
                                                                     31046        30 Gal.        1
                                                                     31047        55 Gal.        1

        A-L-C® ACID LINE CLEANER                                     Part No.       Size        Qty
        Concentrated liquid cleaner targets calcium oxalate          31060         4.0 oz.      50
        build-up from draft beer systems.                            31062        33.0 oz.      12
                                                                     31064         5 Gal.        1
                                                                     31065        15 Gal.        1
                                                                     31066        30 Gal.        1
                                                                     31067        55 Gal.        1




34                       Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Line Cleaners and Accessories
CLEAR-TAP® BEVERAGE LINE CLEANER                            Part No.     Size     Qty
Colored liquid cleaner for all beverage systems. Contains   31070       4.0 oz.   50
food and pharmaceutical grade dyes to trace cleaning        31071      16.9 oz.   24
solution.                                                   31072      33.0 oz.   12
                                                            31073       1 Gal.     4
                                                            31074       5 Gal.     1
                                                            31075      15 Gal.     1
                                                            31076      30 Gal.     1
                                                            31077      55 Gal.     1

ALL KLEARTM RINSE INDICATOR ADDITIVE                        Part No.     Size     Qty
Easy to use tablets containing concentrated blue/green      33000       20 tab    100
food and pharmaceutical colors.                             33001       50 tab     24
                                                            33002      200 tab     12

SUPER NO-RINSE® LINE CLEANER                                Part No.     Size     Qty
Powdered product for cleaning short beverage systems        32010      2.25 oz.   100
and brewing equipment. Contains food grade color            32012      55.0 oz.    8
tracer to assist in rinsing.                                32013       40 lb.     1

PLC® POWDER LINE CLEANER                                    Part No.     Size     Qty
Extra strength powder cleaner for beverage dispensing       32020      2.25 oz.   100
systems and brewing equipment. Contains food grade          32021      25.0 oz.    12
color tracer to assist in rinsing.                          32022      55.0 oz.     8
                                                            32023       40 lb.      1

COLOR CODED SAFETY RINSE                                    Part No.     Size     Qty
Brewery approved beer line cleaner concentrate.             4930        1 qrt.    12




ACCESSORIES
 Part No.   Description                              Qty
 99401      33 oz. Disposable Dispensing Pump         1
 99402      33 oz. Disposable Dispensing Spray        1
 99403      1 Gal. Disposable Dispensing Pump         1
 99404      5 Gal. Disposable Dispensing Pump         1
 99405      15/30 Gal. Serviceable Dispensing Pump    1
 99406      55 Gal. Serviceable Dispensing Pump       1
 99701      3/16" Draft Sponge                        1
 99702      1/4" Draft Sponge                         1




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com            35
Hose and Fittings
THERMOPLASTIC VINYL HOSE
Brewery Approved Beverage Hose - ask for it by name. Check with your brewery for
the assurance Thermoplastic Vinyl Hose that meets and exceeds all the rigid demands
for Beer Dispensing Systems. It remains flexible and durable at recommended
temperatures and pressures. It will not rot, swell, or dry out and is unaffected by
normal cleaning compounds. Available in 5O ft. coils and 100 ft. or 500 ft. spools.

 I.D.      Part No.         Color          O.D.         Length
           547B600          Black         7/16"           50'
           54781200         Black         7/16"          100'
 3/16"     547C600          Clear         7/16"           50'
           547C1200         Clear         7/16"          100'
           547C6000         Clear         7/16"          500'
           548B600          Black          1/2"           50'
           54881200         Black          1/2"          100'
 1/4"      548C600          Clear          1/2"           50
           548C1200         Clear          1/2"          100,
           548C6000         Clear          1/2"          500
           549C600          Clear         9/16"           50'
           549C1200         Clear         9/16"          100'
           549C6000         Clear         9/16"          500'
 5/16"
           553R600           Red          9/16"           50'
           553R1200          Red          9/16"          100'
                                                                                  Hose Cutter
           553R6000          Red          9/16"          500'                        6510
           5508600          Black          5/8"           50
           550B1200         Black          5/8"          100'       BEER FACT: According to a diary
 3/8"      550C600          Clear          5/8"           50'
                                                                    entry from a passenger on the
           550C1200         Clear          5/8"          100'
           550C6000         Clear          5/8"          500'
                                                                    Mayflower, the pilgrims made
           551C600          Clear          3/4            50'       their landing at Plymouth Rock,
 1/2"
           551C1200         Clear          3/4           100'       rather than continue to their
                                                                    destination of Virginia, due to
                                                                    lack of beer.
BRAIDED VINYL BEVERAGE AND PRESSURE HOSE
Reinforced with a high strength braid to withstand up to four
times the pressure of vinyl hose.
 I.D.      Part No.         Color          O.D.         Length
 1/4"      548WD1200C       Clear          1/2"          100'
 5/16"     549WD1200C       Clear         9/16"          100'
 3/8"      550WD1200C       Clear          5/8"          100'
POLYETHYLENE HOSE
 I.D.      Part No.         Color          O.D.         Length
           548NE1200     Translucent       3/8"          100'
 1/4"
           548NE6000     Translucent       3/8"          500'
           549NE1200     Translucent      7/16"          100'
 5/16"
           549NE6000     Translucent      7/16"          500
           550NE1200     Translucent       1/2"          100'
 3/8"
           550NE6000     Translucent       1/2"          500'


36                                       Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Towers
21⁄2" and 3" Chrome or Black
• Hose connector with male beer nut standard on all models
• Polished chrome or black finish
• Available in 21⁄2" O.D. or 3" O.D. models
• Faucets available with brass or stainless steel levers
• Closed cell insulation to eliminate warm-up problems during
  slow serving periods
• Chrome plated flange cover on 21⁄2" O.D. models
• Mounting gasket and faucet knobs are included


 Part No.           Description                        No. of Faucets
 DTD660             2 ⁄2" Chrome
                     1
                                                                1
 DTD620             3" Chrome (not pictured)                    1
 DTD625             3" Chrome                                   2                                DTD660
 DTD650             2 ⁄2" Black
                     1
                                                                1
 DTD640             3" Black                                    1
 DTD645             3" Black (not pictured)                     2




                                                                               DTD625




TOWER CONVERTERS

       ADD-1
     Converts a
  2-Faucet Tower
  into a 3-Faucet

       ADD-2
     Converts a                                                                                      DTD650
  1-Faucet Tower
  into a 3-Faucet
                                              FAUCET CLAMP-ON TOWER

                                                     DT4743
                                                     1 Faucet

                                                    DT4743DT
                                                    2 Faucet




                                                                                        DTD640




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                  37
Draft Towers
21⁄2" and 3" Draft Tower Replacement Parts




             Part No.   Description.                      Part No.        Description
             6500       21/2' Chrome Cap                  6505            21/2" Tube
             6501       21/2" Cap Insulation              6507            21/2" Flange Gasket
             6502       21/2" Cap O-Ring                  6207            Faucet Knob
             6211       Beer Washer                       DTF500          Faucet Assembly
             3015       Hex Nut                           6200*           3" Cap, Chrome
             6216       3/16" Tail Piece                  6201*           3" Cap Insulation
             6203       Lock Nut                          6202*           3" Cap O-Ring
             6204       Back-Up Washer                    6212*           3" Column Gasket
             6214C      3/16" Clear Beer Tube             6205*           3" Tube
             6506       21/2" Adapter, Chrome             6206*           3" Adapter, Chrome
             6213       2" Nipple Shank                   6214W*          Lock Washer
             6006       Shank Coupling Nut               * Not pictured

             6503       21/2" Flange Cover, Chrome




38                            Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
 Draft Towers
  “T” Towers                                                     “Brute” Towers
  Rated #1 for quality, appearance, construction                 Heavy Duty, all stainless steel construction with
                                                                 4" Pedestal Tubes
   Part No.     Description                No. of Faucets
                                                                   Part No.      Description                  No. of Faucets
   TT2CR        Stainless Steel   -   Air         2
                                                                   TTB-6SS       Stainless Steel   -   Air           6
   TT2CRG       Stainless Steel   -   Glycol      2
                                                                   TTB-6SSG      Stainless Steel   -   Glycol        6
   TT3CR        Stainless Steel   -   Air         3
                                                                   TTB-8SS       Stainless Steel   -   Air           8
   TT3CRG       Stainless Steel   -   Glycol      3
                                                                   TTB-8SSG      Stainless Steel   -   Glycol        8
   TT4CR        Stainless Steel   -   Air         4
                                                                   PTB-8SS       Stainless Steel   -   Air           8
   TT4CRG       Stainless Steel   -   Glycol      4
                                                                   PTB-8SSG      Stainless Steel   -   Glycol        8
   TT5CR        Stainless Steel   -   Air         5
                                                                   PTB-10SS      Stainless Steel   -   Air          10
   TT5CRG       Stainless Steel   -   Glycol      5
                                                                   PTB-10SSG     Stainless Steel   -   Glycol       10
   TT6CR        Stainless Steel   -   Air         6
                                                                   PTB-12SS      Stainless Steel   -   Air          12
   TT6CRG       Stainless Steel   -   Glycol      6
                                                                   PTB-12SSG     Stainless Steel   -   Glycol       12
   TT8CR        Stainless Steel   -   Air         8
   TT8CRG       Stainless Steel   -   Glycol      8              “PVD” Tarnish Free Brass
                                                                 Heavy Duty, all stainless steel construction with
  Pass-Thru Towers                                               4" Pedestal Tubes
  Rated #1 for quality, appearance, construction
                                                                   Part No.      Description            No. of Faucets
                                                                   TT3BR-PVD     T-Tower PVD Brass - Air       3
   Part No.     Description                No. of Faucets
                                                                   TT3BRG-PVD    T-Tower PVD Brass - Glycol    3
   PT6SS        Stainless Steel   -   Air         6
                                                                   TT3BR-PVD     T-Tower PVD Brass - Air       4
   PT6SSG       Stainless Steel   -   Glycol      6
                                                                   TT3BRG-PVD    T-Tower PVD Brass - Glycol    4
   PT8SS        Stainless Steel   -   Air         8
                                                                   TT3BR-PVD     T-Tower PVD Brass - Air       5
   PT8SSG       Stainless Steel   -   Glycol      8
                                                                   TT3BRG-PVD    T-Tower PVD Brass - Glycol    5
   PT10SS       Stainless Steel   -   Air        10
                                                                   TT3BR-PVD     T-Tower PVD Brass - Air       6
   PT10SG       Stainless Steel   -   Glycol     10
                                                                   TT3BRG-PVD    T-Tower PVD Brass - Glycol    6
   PT12SS       Stainless Steel   -   Air        12
                                                                   PT8BR-PVD     Pass Thru PVD Brass - Air     8
   PT12SSG      Stainless Steel   -   Glycol     12
                                                                   PT8BRG-PVD    Pass Thru PVD Brass - Glycol 8
                                                                   PT10BR-PVD    Pass Thru PVD Brass - Air    10
                                                                   PT10BRG-PVD   Pass Thru PVD Brass - Glycol 10
                                                                   PT12BR-PVD    Pass Thru PVD Brass - Air    12
                                                                   PT12BRG-PVD   Pass Thru PVD Brass - Glycol 12
PT10SS




                    PT8SS                                            TT6BR-PVD




                                                                                                   TT5CR




  Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                            39
Draft Towers
Juliette, Brauhaus, Brussels
All towers come with a copper cold kit, stainless
steel beer lines and European-style faucets

                                                                                                                 DTD033
                                                                                                        Illuminated Badge Holders
 Part No.      Description            No. of Faucets
 DTD033        BrauHouse 8                  8
 DTD034        BrauHouse 5                  5
 DTD035        BrauHouse 3                  3
 DTD036        Brussels Chrome              3
 DTD037        Juliette 3                   3
 DTD038        Juliette 5                   5




                                                                                                             DTD036
                                                                                                  Non-Illuminated Badge Holders




                                                     DTD038
                                            Illuminated Badge Holders




                                                                                            DTD034
                                                                                   Illuminated Badge Holders




                                                                         DTD035
                 DTD037                                         Illuminated Badge Holders
      Non-Illuminated Badge Holders




40                                       Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Towers
Handcrafted Ceramic Towers — Any Color, Artwork or Logo
• Available in two basic sizes: 6" and 4" base
• Custom, one-of-a-kind shapes can be specially designed
• Custom colors and finishes
• Brass, copper and gold finish rings
• Multiple faucets and lines

JUST ASK AND WE CAN DO IT!



                                                                               DTD001




        DTD002                          DTD003                      DTD004     DTD005




        DTD006                          DTD007                      DTD008     DTD009




             LET US HELP YOU CREATE A ONE-OF-A-KIND DRAFT TOWER


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com            41
Draft Towers
Handcrafted Ceramic Towers — Any Color, Artwork or Logo




     DTD010             DTD011                        DTD012                       DTD013




     DTD014             DTD015                        DTD016                       DTD017




     DTD018             DTD019                        DTD020                       DTD021




          LET US HELP YOU CREATE A ONE-OF-A-KIND DRAFT TOWER


42                     Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Towers
Handcrafted Ceramic Towers — Any Color, Artwork or Logo




        DTD022                        DTD023                       DTD024                DTD025




        DTD026                        DTD027                       DTD028                DTD029




                                                                                 Chrome Drip Tray – DT040




        DTD030                        DTD031                       DTD032      Gold-Plated Drip Tray – DT050




             LET US HELP YOU CREATE A ONE-OF-A-KIND DRAFT TOWER


Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                43
Accessories
Regulator, Faucet, Draft Arm, Cleaning Kit and
Coupler Spare Parts



                                                                                                  HEX NUT
                                                                                                   3015




       COIL CLEAN            CO2 NUT                   0-60 PSI GAUGE: 1017                  0-3000 PSI GAUGE
       6527: 4 oz.            1020             Also available 0-100 PSI GAUGE: 1019                1018
     6527-16: 16 oz.




     SPANNER WRENCH        CO2 NIPPLE                 SHANK COUPLING NUT                  2" SHANK WITH COLLAR
          6529               1025A                           6006                                 6213




     SHUT-OFF VALVE        CO2 WASHER                  1/4" NPT RHT PLUG                      FAUCET HANDLE
          1026                6211                           1029                                 6207




      SHORT NIPPLE     1/4" NPT LHT PLUG                FAUCET BRUSH                      NIPPLE SHANK ASSEMBLY
      1035    1035L          1028                           6528                                3” - 6213A-3
      RHT      LHT                                                                              4” - 6213A-4
                                                                                      Available with 3/16" or 1/4" bore




44                        Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Accessories
Regulator, Faucet, Draft Arm, Cleaning Kit and
Coupler Spare Parts




        1/4" HOSE NIPPLE            5/16" HOSE NIPPLE           3/8" HOSE NIPPLE       3/16"HOSE NIPPLE
              6216E                       6216A                       6216B                  6216




        1/2" HOSE NIPPLE            1/4" X 1/4" SPLICER        1/4" X 5/16" SPLICER   5/16" X 5/16" SPLICER
              6216D                       540-44                      540-45                 540-55




     3/8" X 3/8" SPLICER            3/8" X 1/2" SPLICER        1/2" X 1/2" SPLICER    5/16" X 3/8" SPLICER
           540-66                         540-68                     540-88                  540-56




          1/4" ELBOW                   5/16" ELBOW                 3/8" ELBOW             HOSE CLAMP
            543-4CF                      543-5CF                     543-6CF                 750W



Stepless Clamps
FOR POLY HOSE              FOR VINYL HOSE
 Part No.      Hose I.D.    Part No.    Hose I.D.
 95SL            1/4"       95SL            1/4"
 105SL           1/4"       105SL           1/4"
 113SL           1/4"       113SL           1/4"
 123SL           5/16"      123SL         5/16"
 133SL           3/8"       133SL           3/8"
 140SL           3/8"       140SL           3/8"




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                  45
     Complete Kits
     Everything you need in one box!
      Part No.           Description
      DTK1000            Complete Kit with 21⁄2" Black Tower
      DTK1100            Complete Kit with 3" Black Tower
      DTK1200            Complete Kit with 21⁄2" Chrome Tower
      DTK1100C           Complete Kit with 3" Chrome Tower
     *Kit includes only one draft arm.




46                                            Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Beer Dispensers
BrewMaster
Enjoy the taste of a refreshing, cold draft beer any time from the
luxury of your home with this BrewMaster that dispenses ALL keg
sizes. Holds 1/2, 1/4, slim 1/4 and mini kegs.
Textured worktop and cabinet is heavy-duty to resist wear and
tear. Stainless-steel keg base support makes sure the keg is held
securely in place. Drip tray and water collection reservoir eliminate
spills. Converts to a 6.4 cu. ft. refrigerator for your convenience.
Includes a CO2 tank and pressure regulator, chrome beer tower,
beer faucet, American Sankey coupler, cleaning kit, guard rail and
two full-width wire shelves.

 Part No.               Description
 HBF05EBSS              Stainless Steel Beer Dispenser
 HBF05EABB              Black Beer Dispenser




    *Double draft arm
    shown as optional
    equipment.




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com   47
Draft Beer Q&A
1. What is the maximum pressure for a beer system by keg temperature?
        Keg Temperature °F               35           36-37         38-39            40              41-42     43-44
        Internal Keg Pressure            10             11            12             13               14         15
        Maximum Applied Pressure         13             14            15             16               17         18
        Maximum Pressure                 16             17            18             19               20         21


2. How do I balance my draft beer system pressure?
              Line ID                  Resistance                 Volume/Foot             BEER FACT: A beer is NOT
             in Inches                 in Pounds                   in Ounces
                                                                                          just a beer. All told, there
              3/16"                        3.0                        1/6
                                                                                          are 27 different styles of
               1.4"                       0.85                        1/3
                                                                                          beer, with a further break-
               3/8"                       0.20                        3/4
                                                                                          down of 49 substyles.
               1/2"                       0.025                      1-1/3


3. How long will a keg of beer last?
     Real draft beer is not pasteurized. It must be kept refrigerated between 35°F and 40°F. Above 40°F, a beer
     will become wild, turn sour and cloudy in a day or two. Below 44°F, a keg of draft beer should last 20-30 days
     before it loses its fresh brewery taste and aroma. Craft beers (micro brews) tend to have a shorter shelf life.
     You should contact the brewery for their recommendations.


4. How do I balance a draft system?
     The second most frequent cause of foaming in draft beer system (high beer temperature at keg or
     glass No. 1) is system pressure balance. The pressure on the beer regulator gauge must be set
     equal to the pounds of resistance calculated in the formula below.


     Compute the regulator setting (gauge) pressure by:
     PRESSURE = LENGTH OF BEER LINE X LINE RESISTANCE + LIFT X 0.5
     Where the length of beer line is its length in feet, Line Resistance is given in the beer line chart
     below. Lift is the height in feet of the faucet above the keg connector or serving tank.

     EXAMPLE 1:
     Faucet is one foot above the keg, line is five feet of 3/16 beer line. The total resistance is:
     (5 feet x 3.0 lb/ft or 15 pounds) + (1 feet x 0.5 lb/ft or 0.5 pounds) = 15 pounds.
     Answer: Set regulator to 15 pounds
     EXAMPLE 2:
     Faucet is five feet above the keg, line is 15 feet of 1/4 beer line. The total resistance is:
     (15 feet x 0.85 lb/ft or 12.7 pounds) + (5 feet x 0.5 lb/ft or 2.5 pounds) = 15.2 pounds.
     Answer: Set regulator to 15.2 pounds




48                                     Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Beer Q&A
5. Why does my beer foam up?
    The three most common causes of beer foaming are:
    • The temperature of the beer keg
    • The reference balance of the draft beer system pressure
    • The cleanliness of the draft beer system

6. How many glasses of beer are in a keg?
   Number of glasses of beer in a barrel. All quantities are for 1/4 kegs. Numbers in ( ) are for 1/2
   kegs. Actual number of glasses will vary with the shape of the glasses.

           Glass Size           1" Head          3/4" Head           1/2" Head                 BEER FACT: Before ther-
              8 Oz.             168 (355)        158 (317)           143 (286)                 mometers were invented,
             10 Oz.             132 (264)        123 (246)           114 (228)                 brewers would dip their
             12 Oz.             110 (220)        102 (204)           95 (190)                  thumb or finger into the
             16 Oz.             82 (164)         76 (153)            71 (143)                  mix to find the right
         60 Oz. Pitcher          19 (39)          18 (36)             16 (33)                  temperature for adding
                                                                                               yeast. Too cold, and
7. How much beer is in a keg?                                                                  the yeast wouldn’t grow.
                                                                                               Too hot, and the yeast
              Type                Cases           Gallons             Weight                   would die. This thumb
           1/2 Barrel               7               15.5              170 lb.                  in the beer is where we
           1/4 Barrel              3 ⁄2
                                    1
                                                    7.75                85 lb.                 get the phrase “rule
           1/6 Barrel              2 ⁄2
                                    1
                                                     5                  60 lb.                  of thumb.”
            Party Ball             2 ⁄2
                                    1
                                                     5                  45 lb.


8. What is the physical size of a keg?
           Keg Type              Diameter          Height without Tap            Height with Tap     Height with LoBoy
        1/2 US Sankey              16 ⁄2"
                                        1
                                                            23 ⁄4"
                                                              1
                                                                                      29"                  26"
        1/4 US Sankey              16 ⁄2"
                                        1
                                                            13 ⁄4"
                                                              3
                                                                                      19"                  17"
       US 5 Gallon Pony             10"                     23 ⁄4"
                                                              1
                                                                                      30"                  28"
     5 Gallon Beer Sphere           15"                      15"                      18"                  N/A
          Party Keg                 7"                       10"                      15"                  N/A
        Pepsi 5 Gallon              9"                       25"                      28"                  N/A
        Coke 5 Gallon               9"                       23"                      27"                  N/A




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                         49
Draft Beer Maintenance

Look at Cleaning Equipment and Cleaning Instructions for all the information on cleaning your draft
beer tap system regularly. Most states require beer line cleaning once a week. Some states require it
twice a week. Dirty lines and faucets are breeding grounds for molds, bacteria, and beer stones
which make for off-tasting, smelly, foamy draft beer.
Most states require that you clean your entire system once a week including your faucet and coupler.
When cleaning the faucet it is important to give special attention to the small hole on the underside
of the spout. It is a great place for mold to grow. Bars, pubs, restaurants and taverns should have
their couplers cleaned every week to ensure fresh clean beer for their customers and comply with
local and state regulations. Most states have laws governing the time allowed between cleanings.
Bars, pubs, restaurants and taverns may contact their local distributors for all their tap repair service
and beer tap cleaning equipment requirements. Most bar managers know that a draft beer system
should be cleaned every week. More frequent cleaning is required when usage is low and lines are
not kept cool. If a draft beer system is left un-serviced (not cleaned) for longer periods of time, the
beer will start to foam, lose carbonation and develop off-flavors and colors. Most bars, restaurants
pubs and taverns can arrange to have their draft systems placed on an automatic cleaning schedule.
This will reduce the worry of having contaminated draft beer or violating the state laws requiring
such cleaning.
Draft beer is usually not pasteurized and therefore will spoil unless the beer is kept between 36°F
and 38°F at all times. In addition, the dispense lines and equipment must be cleaned periodically.
The job is simple to do.
CLEANING A DIRECT DRAW COOLER:
1. Shut off the pressure supply at the C02 cylinder.
2. Remove the coupler (beer tap) from the keg.
3. Remove the black cap and pump on the hand-held cleaner.
4. Fill jar with fresh water and approved cleaning solution and reassemble.
5. Remove the faucet from the shank (use the spanner wrench provided).
6. Rinse the faucet under fresh water with faucet in open position.
7. Connect the cleaning attachment on the end of the cleaner to the faucet shank-coupling nut.
   Tighten coupling nut slightly with the spanner wrench.
8. Place the keg coupler into an empty bucket and pump water through line. Be sure the coupler
   handle is in the open or down position.
9. Remove cleaning attachment from the shank and replace the faucet. Tighten coupling nut with
   spanner wrench. Make sure the beer faucet is closed and then re-tap the keg.




50                                     Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Beer Maintenance


MEDIUM OR LONG DRAWN
Non-Direct Draw situations can be cleaned as follows:
1. Using the pressure source in the existing system, you can run fresh water and cleaning solutions
   through the draft system just as you would normally dispense beer. To do this you will need a
   cleaning canister which will hold the water and cleaning solution just as the keg holds beer.
2. Fill the cleaning pot with fresh clean water and an approved beer line cleaning solution.
3. Remove the coupler from the keg and attach to the cleaning pot with the mixture and then engage
   the coupler.
4. With the gas in the on position, you can begin to flow the liquid cleaning solution through the
   lines in the same manner as you would draw a beer.
5. Open the faucet completely to allow full pressurized flow of the cleaning solution.
6. Once the line has completely filled with the cleaning solution, close the faucet and allow the solu-
   tion to work on the interior of the beer line. This will remove any yeast buildup, beer stones and
   sediment that naturally occur in the beer line.
7. After the lines are cleaned, remove the coupler and faucet parts, brush thoroughly with faucet
   brush. Rinse all parts in a pail or sink with cool fresh water and reassemble the faucet and coupler.
8. Use the faucet brush to clean around shank end and coupling nut.
9. Reassemble the coupler and faucet.
10. Attach faucet to shank and tighten with spanner wrench.
11. Attach beer line to coupler making certain to reinsert the black hose washer. You are now ready to
    tap the new keg of beer. The drip tray should be cleaned out with a sponge using the same solu-
    tion and then rinsed.
12. Periodically the inside of refrigeration unit should be cleaned with same solution and a damp sponge.
13. When the keg is empty and the unit is not going to be used for a while, the above steps should be
    followed to prevent yeast build up, beer stones and sediment in the beer line.


REGULAR MAINTENANCE
Periodically, the faucet washers should be checked for wear and replaced as necessary. If the faucet
drips in the closed position, the rubber faucet shaft seal washer on the shaft should be replaced.




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                51
Draft Beer Maintenance
Keeping your draft beer fresh and delicious
STOCK ROTATION
Beer improves with age in the laagering tanks, but not after it's in the package.
• Always rotate old stock in front of new stock.
• Shelf life should never exceed 50 days.
• All tapped barrels should be completely emptied and replaced with fresh barrels at least once a week.

STORAGE TEMPERATURE
At higher temperatures, especially approaching 50° Fahrenheit, the aroma and flavor of beer deteriorate
rapidly. At lower temperatures, below 32° Fahrenheit, there is always the danger of freezing. If beer is
frozen or exposed to multiple freezings, ingredients break down and separate, rendering it unfit for sale.
• Draft storage areas should be maintained at no more than 36-38° Fahrenheit. Draft liquid should
  never exceed 45° Fahrenheit.
• Always remember these three points when storing beer: clean, dry, and dark.
• Clean - Your storage area must be clean to keep cartons, bottles and cans attractive, presentable,and
  dust free. Beer stored in a dirty area loses sales appeal.
• Dry - Beer cartons/packages must also be protected from dampness. Damp cartons can cause bottle
  breakage or cause damage to secondary packaging.
• A dark storage place is especially important to bottled beer to prevent it from becoming light-struck
  and from taking on an undesirable flavor and aroma. Exposure to direct sunrays will noticeably affect
  beer flavor in only a few minutes. Beer that is light-struck will have an odor similar to that of a
  skunk. This condition is known as “skunky beer.”
While beer in cans is not affected by light, direct sunrays cause overheating, which may change the aroma
and taste.

DRAFT SYSTEM CLEANING AND MAINTENANCE
Cleanliness and proper settings on all draft equipment is essential in assuring your beer tastes the way
the brewer intended.
• Most states have laws governing the regularity of cleanings. Be sure to always at least abide by
  those laws.
• It is recommended that the total system from keg to faucet be sanitized once per week. The faucet
  and the lines should be cleaned once a week also.
• When cleaning the faucet be sure to give special attention to the small hole on the underside of the
  spout. It is a great place for mold to grow.




52                                    Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Draft Beer Maintenance
Keeping your customers satisfied
• Retailers should have their lines professionally cleaned. Your wholesaler will usually offer this service.
• Tap lines should be replaced every five years.
  A detailed log should be kept on all cleaning and maintenance services.
POURING AND SERVING DRAFT BEER
A properly handled and served beer creates customer loyalty and results in future sales.
• When pouring beer from a tap, open the faucet all the way with a quick, smooth motion by grasping
  the tap handle at its base. Puffing the tap handle at the top opens the faucet too slowly, and beer
  will draw foamy. At the beginning of the pour, tilt the glass slightly and don't let the glass touch
  the beer faucet. Then straighten the glass as you pour, and top it with a collar of 1/2 inch to 1 inch
  of foam.
• To make sure your glasses are “beer clean,” a three-sink cleaning system is ideal. The first sink is for
  washing the glasses, the second for rinsing, and the third for sanitizing the glasses. If you have a
  two-sink system, use the first for cleaning the glasses and the second for sanitizing.
• Make sure you always use cleaners and sanitizers specifically designed for cleaning beer glasses.
• When drying the glasses be sure to allow airflow inside the glasses. It is usually best to use a
  drying rack.
WAYS TO CHECK IF YOUR GLASSES ARE “BEER CLEAN”
• Wet the inside of the glass and turn upside down. If the water drops stick to the side it is not
  “beer clean.”
• Bubbles will form on the sides of a glass that is not “beer clean.”
• Lacing from the head will only form on the sides of a “beer clean” glass.
PRESSURE AND GAS SOURCE
• The right balance of gas pressure assures the proper flow so that the beer dispenses correctly.
• Do not use an air system – when air mixes with the beer it will oxidize and create off flavors.
• Most systems should use straight C02.
• For long draw systems a 70/30 Nitrogen/C02 blend should be used.
• To set the proper system pressure balance use the following formula:
  Pressure = length of beer line (feet) x line resistance - lift (feet)(0.5) + Drop .07




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                   53
Keg Valve Master List
                 Which keg couplers go with which beer kegs?

                                        Key:
         “D” = American Sankey                          “A” = German Slider
         “S” = European Sankey                          “G” = Bass/Caffrey’s
         “HS” = Hoff Stevens                            “U” = Guinness/Harp

          Amstel                 S                   Michelob                D
          Amstel Light           S                   Michelob Light          D
          Anchor Steam           G                   Michelob Specialty      D
          Bass Ale               G                   Middle Ages             D
          Beamish                S                   Miller                  D
          Becks                  S                   Milwaukee’s Best        D
          Blue Moon              D                   Molson                  D
          Boddingtons            U                   Moosehead               D
          Breckenridge           D                   Murphy’s Irish Stout    S
          Brooklyn Breweries     D                   Natural Ice             D
          Bud Ice                D                   Natural Light           D
          Bud Light              D                   New Amsterdam           HS
          Budweiser              D                   O’Doul’s                D
          Busch                  D                   Old Milwaukee           HS
          Caffrey’s              G                   Old Speckled Hen        U
          Carlsberg              D                   Old Vienna              D
          Cider Jack             D                   Pabst                   D
          Coors                  D                   Paulaner                A
          Coors Light            D                   Pete’s Wicked           D
          DAB                    S                   Pilsner Urquell         S
          Dos Equis              D                   Red Dog                 D
          Double Diamond         S                   Red Hook                D
          Fosters                D                   Red Wolf                D
          Fullers                G                   Rouge                   D
          Genesee                D                   Rolling Rock            D
          Guinness               U                   Samuel Adams            D
          Hacker-Pschorr         A                   Saranac                 D
          Heineken               S                   Schaeffer               HS
          High Falls             D                   Schlitz                 HS
          Hoegaarden             S                   Scottish New Castle     S
          Hornsby’s              D                   Shipyard                D
          Ice House              D                   Sierra Nevada           D
          Iron City              HS                  South Paw Light         D
          Ithaca                 HS                  Spaten                  A
          John Courage           S                   St. Pauli Girl          S
          JW Dundee              HS                  Strohs                  HS
          Killian’s Red          D                   Warsteiner              A
          Labatt Blue            D                   Watney’s                G
          Lowenbrau              S                   Weinhard’s              D
          McEwan’s               S                   Woodpecker              S
          McSorley’s             HS                  Yuengling               HS
          Michael Shea’s         D                   Zebra                   HS


54                     Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com
Warranty and Terms


PAYMENT TERMS:
Net 30 Days from Invoice Date. Draught Technologies reserves the right to add a late payment charge of
1.5% per month on any past due amounts. Credit card payments excepted at time of order. All credit
cards accepted after invoice date will be subject to a 2% processing fee.


FREIGHT TERMS: FOB:
Farmington, Connecticut, USA. All goods are suitably packaged, labeled, and palletized to prevent dam-
age or loss during shipment. Crating or other special packaging instructions will be subject to a packing
charge. Orders will be shipped via the best method possible, unless a specific carrier is requested. Any
damage or loss sustained in shipment should be reported to the delivering carrier. Ask the carrier's
agent for assistance in filing a freight claim. Draught Technologies Customer Service Department can
also provide assistance.


WARRANTY:
All products are warranted against defects in both material and workmanship under normal use and serv-
ice for a period of one (1) year from date of shipment. Should a product, in the sole opinion of Draught
Technologies malfunction within the warranty period, Draught Technologies will repair or replace the
product without charge. Replacement of product will be on an exchange basis only. This warranty does
not apply to any product that has been damaged due to accident, abuse, improper installation, natural
or personal disaster or unauthorized alterations, repairs, or modifications. In no event will Draught
Technologies be liable to any purchaser for any costs or damages beyond product repair or replacement,
arising from the purchase, use or inability to use any Draught Technologies product. Before returning
any product for warranty service, please call the Customer Service Department for a Return Material
Authorization (RMA) reference number.


RETURN OF MERCHANDISE:
Draught Technologies will, for a period not to exceed six (6) months from the original purchase date,
accept the return of product when; (1) the return has been authorized in advance of return shipment;
(2) the product is in new condition, in its original carton with all original packing; and (3) the purchas-
er prepays all freight charges related to the return shipment. A credit amounting to the original pur-
chase price, less a restocking charge of up to 25% will be issued.


MINIMUM INVOICE AMOUNTS:
Draught Technologies reserves the right to require a minimum invoice value of $25.00 per order.




Order Toll-Free 1-866-TAP-A-KEG or visit our web site at www.draughttech.com                                  55
                         Toll-Free: 1-866-TAP-A-KEG
                            www.draughttech.com




                                                         Prsrt Std
                                                        US Postage
                                                           PAID
                                                       Permit No. 10
592 New Britain Avenue                                Farmington, CT
Farmington, CT 06032

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:248
posted:7/25/2011
language:English
pages:56