CARPET

Document Sample
CARPET Powered By Docstoc
					                                                          CARPET

PREVENTIVE MAINTENANCE

A. Spot Removal
Refer to the Hillyard CARPET SOLUTIONS SPOTTING CHART for proper product selection. Apply product directly to the
spot. Agitate spot from the outside edge to the center using a bone scraper or other smooth edged instrument, such as a
spoon. Blot and rinse after applying each cleaning product.

INTERIM CLEANING

A. Bonnet Cleaning
Dilute Hillyard DEEP ACTION® with water at 1:6 (20 oz. per gallon). Apply uniform mist with shoulder sprayer. Clean carpet
with DEEP ACTION bonnet under single brush floor machine. Change and clean bonnets as they become dirty.

B. Light Extraction
Mix Hillyard CARPET PRE-SPRAY at 1:64 (2 oz. per gallon) in a pump up sprayer. Pre spray approximately 200 sq. ft. of
carpet. Extract with clean hot water not to exceed 150 degrees. Allow carpet to dry thoroughly before opening to traffic.

DEEP CLEANING

A. Extraction
Mix CARPET PRE-SPRAY at 1:32 (4 oz. per gallon) in a pump up sprayer. Apply to approximately 400 sq. ft. of carpet. Mix 1
ounce Hillyard CLEAN ACTION® II with hot water (not to exceed 150 degrees) in solution tank of extractor and extract carpet.
Allow carpet to dry thoroughly before opening to traffic.

B. HD Extraction Cleaner
Mix CARPET PRE-SPRAY at 1:32 (4 oz. per gallon) in a pump up sprayer. Apply to approximately 400 sq. ft. of carpet. Mix 2
ounces Hillyard HD Extraction with hot water (not to exceed 150 degrees) in solution tank of extractor and extract carpet. Allow
carpet to dry thoroughly before opening to traffic.

C. Shampooing
Using shampoo machine or rotary system, dilute Hillyard CLEAN RELEASE® according to soil load; light cleaning 1:64;
regular cleaning ñ 1:32; renovating heavily soiled carpets ñ 1:16. Immediately after shampooing, pick up foam with wet vac.
Vacuum when dry to remove any residue.

SPECIALTY CARPET PRODUCTS

A. Protection
To help prevent soil and stains from penetrating carpets and to make vacuuming easier, apply Hillyard SOIL-STOP® following
label directions.

B. Static Control
To control static electricity, apply Hillyard CARPET ANTI-STAT with pump-up sprayer following label directions.

C. Sanitizing
To control malodors and sanitize areas, apply Hillyard CARPET SANITIZER following label directions.

D. Carpet Booster
Non-chlorine, oxygen-based, granular cleaner that brightens colors and removes mild yellowing in carpets. Carpet Booster
goes to work immediately and gives carpets a bright, crisp look without the use of optical brightners. Mix Carpet Booster in an
extractor solution tank with Hillyard Clean Action® II or Hillyard HD Extraction, or pre-spray directly on carpet.

NOTE: Not recommended for use on stain-resistant carpets.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:21
posted:7/21/2011
language:English
pages:1