Get documents about "HUNTER
Document Sample
NT E
Ra Im
y
aR T
W LIFE
QUALITY PRODUCTS THAT LAST A LIFETIME
Request a catalog or visit us on-line at spot-hogg.com to learn more about our full line of products. HUNTER
FIBER OPTIC PIN SIGHT
Shown with optional Hogg Wrap and 5 pin Small Guard
The Spot-Hogg Hunter sight is the most technologically advanced pin sight
on the market. No other sight offers such complete micro-adjustability.
Put one on your bow and it won’t take long to realize why it’s the #1 choice
HUNTER
of serious hunters around the world. Individually micro-adjustable pins,
WHammy micro-adjustable windage and elevation, along with 2nd and 3rd
HOGG FaTHER axis leveling capabilities put this sight in a class all by itself. If you
are serious about your shooting and are looking for a sight that can
handle season after season of hardcore, in the field use, this sight
won’t let you down.
• Rugged 3.5” hard mount • Precision installed bubble & wire
ROVER • Four different mounting locations • Individual horizontal & vertical
• 2nd & 3rd axis micro-adjust micro-adjustable pins
• Self locking horizontal & vertical • Built out of solid 6061
BOSS HOGG TOmmy HOGG gang micro-adjust air-craft aluminum
• Coarse horizontal & vertical
gang adjustment Accessories available:
• Round pin guard with Wrap kit, Rheostat light,
PLaTINUm alignment ring
Lens, Lens cover
HOGG-IT HUNTER
INFINITy
125 Smith Street • PO Box 226 • Harrisburg, OR 97446
E-mail: info@spot-hogg.com www.spot-hogg.com
REaL dEaL RIGHT ON
PH: 888-302-7768 Fax: 541-995-6370
FRIday SaTURday CaSCadE W 3 5 7 LG SG 10 19 29 CU
NIGHT NIGHT mOdEL
dELIGHT SPECIaL 10 PREmIER
made in the u.s.a
HaSSLE FREE - SELF LOCkING mICROadjUST
HUNTER OWNERS MANUAL • Mount the sight based on your floating pattern, then use a hand held chuck and a drill index #’s 1 thru 60, and incrementally drill out
the peep until you achieve a match. Always use a hand held drill chuck, never use an electric drill or it can bind up and potentially
VERTICAL PIN ADJUSTMENT: There are two 6-32 set screws designated to each pin, located at the back of the pin guard. By loosening
one screw and tightening the other, you can move the pin up or down. If you want to move the pin up, loosen the upper screw and
cut your string. tighten the lower. If you want to move the pin down, loosen the lower screw and tighten the upper. Be sure you go back and snug the
The Spot-Hogg Hunter sight is the most technologically advanced pin sight on the market. No other sight offers such complete micro-
screw you loosened first to ensure it will not come loose.
adjustability. Put one on your bow and it won’t take long to realize why it’s the #1 choice of serious hunters around the world.
PIN GAPS: The farther the sight is mounted from the bow the farther apart your pin gaps will be. The closer the sight is mounted to the
STANDARD FEATURES PARTS LIST bow the tighter your pin gaps will be. MAKING SMALL VERTICAL PIN ADJUSTMENTS EXAMPLE: Insert the allen wrench into the screw so the allen handle is dog legged to 12
o’clock. As you loosen the screw, the allen handle will jump to about 10 to 11 o’clock. Tighten it back to 11:30, then remove the allen
• Rugged 3.5” hard mount 1 – Pin guard with pins, fiber optics, and STEP 3 – SETTING THE 2nd & 3rd AXIS wrench. Insert it into the other screw and tighten the last ½ hour the rest of the way up. By using this method you can move the pin in
• Four different mounting locations Hogg Wrap (optional) already installed 2nd AXIS: The 2nd axis screws are located on the bottom of the sight. By backing out one screw and tightening the other, you can as small as ¼ of a fiber optic.
• 2nd & 3rd axis micro-adjust 1 – Bar, 2nd & 3rd axis, and micro-adjust move the entire pin guard and bubble clockwise or counter-clockwise. Hold the bow against a straight door jam, or a carpenter’s level
from top limb pocket to bottom limb pocket. Adjust the 2nd axis screws so the bubble on the sight reads level. STEP 6 – SIGHTING IN
• Self locking horizontal & vertical gang micro-adjust already assembled
CHOOSE A METHOD: When starting out you will want to use one of the methods listed below to make sure you achieve the desired
• Coarse horizontal & vertical gang adjustment 2 – 10-24 X 5/8” mounting screws 3rd AXIS: The 3rd axis screws are located on the side of the sight. By backing out one screw and tightening the other, you can settings based on your application. The individual horizontal pin adjustments are only used to keep the pin splitting the wire. Use the
• Round pin guard with alignment ring move the entire pin guard and bubble in a left or right arc. Hang a plumb bob (to make one: use a string with a heavy washer gang horizontal micro-adjustment for all general left and right impact point adjustments.
attached to one end). Stand back from the plumb bob approximately 3-4 feet. Draw the bow back, look through the peep, center
• Precision installed bubble & wire the peep with the pin guard (SAME GRIP & AIMING PROCESS AS WHEN YOU SHOOT). Aim diagonally up or down at approximately Depending on which method you choose, will depend on how you use the gang vertical micro-adjust for sighting in.
• Individual horizontal & vertical micro-adjustable pins a 45% angle. Line the wire up with the plumb bob string, look at the bubble. If the bubble is not reading level, let down, make an There is a multitude of different methods for sighting in, listed below are the three most popular.
• Built out of solid 6061 air-craft aluminum adjustment to the 3rd axis screws and repeat the process. Repeat the process until the bubble reads level when the wire is lined
up with the plumb bob string. METHOD 1: Sight in the 20 yard pin, by moving the pin guard up, down, and side-to-side until the 20 yard pin is impacting spot on.
STEP 1 – ASSEMBLING THE SIGHT Then use the individual pin adjustments to sight in the other pins.
RIGHT HAND OR LEFT HAND: Completely remove the 2) 8-32 coarse horizontal & vertical screws from the sight mount & spacer. STEP 4 – GANG ADJUSTMENT
Insert the pin guard between the four hole spacer and the four threaded HORIZONTAL COARSE ADJUST: To move the whole pin guard left or right, loosen METHOD 2: Sight in the 40 yard pin, by moving the pin guard up, down, and side-to-side until the 40 yard pin is impacting spot on.
mounting holes. Insert the screws into the top & bottom holes of the spacer and remove the 8-32 screws holding the pin guard to the micro-adjust. You can Then use the individual pin adjustments to sight in the other pins. Using this method the pins will have a more even spread across the
and mount. Leave the two holes in the middle empty, and tighten. The bubble position the pin guard on either side of the threaded holes on the micro adjust. pin guard.
needs to be at the bottom of the pin guard. You can also use the provided spacer, as needed.
METHOD 3: Sight in the bubble as a 6th pin, by moving the pin guard up, down, and side-to-side until where the wire meets the bubble,
CENTERING, THE ADVANCED AIMING TECHINIQUE: All Spot-Hogg sights come HORIZONTAL MICRO-ADJUST: Insert a 9/64 allen wrench into the head of the is impacting spot on for the distance desired (example: 70 yards). Then, use the individual pin adjustments to sight in the other pins.
with a round pin guard and white alignment ring. We have found that center- horizontal micro-adjust screw. Turn the screw clockwise to move it left, turn Using this method, the pins will have a nice even spread and you will have an extra pin..
ing your pin guard in your peep, is more accurate and easier to duplicate the it counter-clockwise to move it right (Right hand shooters perspective). The
aiming process, than trying to center a single pin. When centering your pin micro-adjust will automatically self-lock when movement stops. TROUBLESHOOTING:
guard, you are centering one circle inside a slightly larger circle, making it PINS DON’T LINE UP WITH THE WIRE: The horizontal setting of the arrow rest is tied to the bubble of the sight on all Solo Cam & Single
easier to tell when you are slightly off center. Centering your guard, will allow VERTICAL COARSE ADJUST: To move the whole pin guard up or down, loosen Cam bows. If the horizontal setting is not set correctly, you will find that when sighted in the pins don’t line up with the wire. If from
you to use a larger peep than you might normally use, which is an added and remove the 8-32 screws holding the pin guard to the micro-adjust. Move top to bottom, the pins are running right to left, you need to move your arrow rest to the right. If from top to bottom, the pins are run-
benefit for hunters, in those low light situations. With our round pin guard, the pin guard up or down to the desired height, insert and tighten the screws. ning left to right, you need to move the arrow rest to the left.
you can have freestyle accuracy with a fixed pin sight.
VERTICAL MICRO-ADJUST: Insert a 9/64 allen wrench into the head of the ALLEN WRENCH UPKEEP: Using a good allen wrench when making adjustments to the sight can prolong the life of your screws
STEP 2 – MOUNTING THE SIGHT TO THE BOW vertical micro-adjust screw. Turn the screw clockwise to move it down, turn it dramatically. If the allen wrench starts to become worn/rounded it is recommended you grind off the worn/rounded portion. This will
This sight has four different sets of mounting holes. Insert the 10-24 X 5/8” counter-clockwise to move it up. The micro-adjust will automatically self-lock ensure you have full contact when making adjustments and reduce the likely hood of stripping or rounding the head of the screw.
mounting screws into the desired holes and tighten to the bow. The two when movement stops.
threaded holes on the mounting bar are for a bow quiver. The mounting holes SIGHT PRODUCT WARRANTY & REPAIR POLICIES:
you choose, affect you in multiple ways. STEP 5 – INDIVIDUAL PIN ADJUSTMENTS • All Spot-Hogg returns/repairs require a return authorization number (RA#). Please call our office between the hours of 7:00am to 3:30 PST, to
MAKE SURE ALL THE VERTICAL ADJUSTMENT SCREWS ARE TIGHT BEFORE obtain this number. Products that arrive without an RA# may be returned to sender.
SHOOTING, NEVER SHOOT WITH THE VERTICAL ADJUSTMENT SCREWS LOOSE • Any disassembly of major units, such as micro-drives or pushed-out 3rd axis pin, will void your warranty.
HOLDING STEADY: The closer the sight is to the bow, the steadier it will appear
• Our warranty covers all manufacturer defects for the lifetime of the product (Fiber optics are excluded).
on the target. The farther the sight is from the bow, the harder it will be to OR YOU WILL LOOSE A PIN & TURRET.
• If any of the metal parts/pieces on the sight bend or break due to accidents, customer abuse, etc., the customer will be charged accordingly.
hold steady on the target. It is recommended that when choosing the mount- • Parts needing repair due to customer modifications, such as clipped wire, removed or broken bubble, holes drilled or other modifications may be
ing location, use the holes that allow you to float the size of the spot at the PIN ORDER: Top pin should always be your shortest distance, and your bottom charged for replacement parts and/or handling needed to repair the unit.
farthest distance you intend to shoot. This will allow you to achieve good shot execution rather than punching the release as it floats pin the longest distance. • The customer is responsible for shipping charges to return a product. Spot-Hogg will pay the shipping charges to return a repair to the customer.
by the spot. • If a customer needs a replacement piece immediately, due to a damaged product, Spot-Hogg will send the part/piece necessary only with
HORIZONTAL PIN ADJUSTMENTS: When making large vertical adjustments to submission of a valid credit card. The card will be charged upon sending of replacement product. The customer then has 30 days to return the
PEEP ALIGNMENT: Peep alignment with the white sticker on the pin guard, will change depending on where the sight is mounted. It is the pins you may find that the pin no longer lines up with the wire. Each pin damaged part for credit.
strongly recommended when choosing your mounting location that the peep & pin guard have a nice concentric match. So when look- has a single button head screw, located at the rear of the turret, for making
ing through the peep, the outside diameter of the field of view, just catches the white alignment ring on the pin guard. horizontal micro-adjustments. Turning the screw clockwise will pull the pin into the turret and away from the wire. Turning the screw THE SPOT-HOGG GUARANTEE: We guarantee your sight to be of the finest quality and craftsmanship. All sights come with a limited lifetime war-
counter-clockwise will move the pin out of the turret and towards the wire. When making adjustments always apply pressure into the ranty. Should your sight become damaged, Spot-Hogg will fix or replace any part of the sight, excluding fiber optics. Scratches, dings, or dents, don’t
THERE ARE TWO WAYS OF ACHIEVING PEEP AND PIN GUARD ALIGNMENT. screw head with the allen key, so you don’t round out the screw head. There are no lock downs needed on the pins individual, horizon- apply. For any questions or comments regarding the Spot-Hogg Real Deal or warranty service on this product, contact us at.
• By changing peep size and moving the sights mounting location in and out, you should be able to get a good match between the peep tal micro-adjust screws.
and pin guard. Spot-Hogg Archery Products • 125 Smith Street • Harrisburg, OR 97446 Tel: 888-302-7768 (toll free) Fax: 541-995-3702
E-Mail: info@spot-hogg.com Web: www.Spot-Hogg.com
NT E
Ra Im
y
aR T
W LIFE
QUALITY PRODUCTS THAT LAST A LIFETIME
Request a catalog or visit us on-line at spot-hogg.com to learn more about our full line of products.
Shown with optional Hogg Wrap
Spot-Hogg’s SEVEN DEADLY PINS has taken the industry by storm.
This sturdy signature series fiber optic pin sight is based off the
popular Right On and Real Deal sights. The name proves it’s
toughness and effectiveness in the field as the man it’s created
HOGG FaTHER WHammy after, Cameron R. Hanes. Unlike other sights, the SDP fits 7 pins
inside Spot-Hogg’s tried and proven circular all metal pin guard.
Giving you the added benefit of two extra pins without sacrificing
the increased accuracy of centering your pin guard in your peep.
Cameron is the Editor of Eastmans Bowhunting Journal and the
Hunting editor for Eastman Hunting Journal. His dedication to
bowhunting and drive to share his knowledge with others makes
ROVER him a perfect fit for the Spot-Hogg team.
7 individually micro Industrial strength dovetail
BOSS HOGG TOmmy HOGG adjustable fiber optic pins for gang micro-adjust
Round pin guard for White alignment ring
more precise aiming
PLaTINUm Weight: 6.5 oz. BUILT
Precision installed level TO LAST
and aiming wire
STRONGEST
HOGG-IT HUNTER dOVETaIL
CLamPING
SySTEm
aVaILaBLE
INFINITy
SOLId
125 Smith Street • PO Box 226 • Harrisburg, OR 97446 aL U m IN U m
CONSTRUCTION
E-mail: info@spot-hogg.com www.spot-hogg.com
REaL dEaL RIGHT ON
PH: 888-302-7768 Fax: 541-995-6370
FRIday SaTURday CaSCadE W 3 5 7 LG SG 10 19 29 CU
NIGHT NIGHT mOdEL
dELIGHT SPECIaL 10 PREmIER
mICRO
adjUSTaBLE
FIBER OPTIC
PINS
made in the u.s.a
V I R T U a L Ly I N d E S T R U C T I B L E
SEVEN DEADLY PINS OWNERS MANUAL HOLDING STEADY: The closer the sight is to the bow, the steadier it will appear on the target. The farther the sight is from
the bow, the harder it will be to hold steady on the target. It is recommended that when choosing the mounting location,
MAKING SMALL VERTICAL ADJUSTMENTS EXAMPLE: Insert the allen wrench into the screw so the allen handle is dog
legged to 12 o’clock. As you loosen the screw, the allen handle will jump to about 10 to 11 o’clock. Tighten it back to
use the holes that allow you to float the size of the spot at the farthest distance you intend to shoot. This will allow you 11:30, then remove the allen wrench. Insert it into the other screw and tighten the last ½ hour the rest of the way up. By
The Spot-Hogg Real Deal sight, is the most ruggedly built sight in the world. Its industrial strength dovetail to achieve good shot execution rather than punching the release as it floats by the spot. using this method you can move the pin in as small as ¼ of a fiber optic.
design, gives it unmatched strength. Easy to use micro-adjustable knobs and heavy duty clamping screws,
guarantee your gang adjustments will not come loose. Just tighten the screws and enjoy the security of PEEP ALIGNMENT: Peep alignment with the white sticker on the pin guard, will change depending on where the sight STEP 5 – SIGHTING IN
knowing it will be there when you need it. This sight is for serious shooters who want the best. is mounted. It is strongly recommended when choosing your mounting location that the peep & pin guard have a nice CHOOSE A METHOD: When starting out you will want to use one of the methods listed below to make sure you achieve
concentric match. So when looking through the peep, the outside diameter of the field of view, just catches the white the desired settings based on your application. The individual horizontal pin adjustments are only used to keep the pin
STANDARD FEATURES PARTS LIST alignment ring on the pin guard. splitting the wire. Use the gang horizontal micro-adjustment for all general left and right impact point adjustments.
• Heavy Duty Clamping Screws 1 – Pin guard with pins, fiber optics, and Hogg
THERE ARE TWO WAYS OF ACHIEVING PEEP AND PIN GUARD ALIGNMENT. Depending on which method you choose, will depend on how you use the gang vertical micro-adjust for sighting in. There
• Industrial Strength Dovetail Wrap (optional) already installed
• By changing peep size and moving the sights mounting location in and out, you should be able to get a good match is a multitude of different methods for sighting in, listed below are the three most popular.
• Horizontal & Vertical Gang 1 – Bar & Center ¼-20 screws already assembled between the peep and pin guard.
Micro-Adjustment With Knobs • Mount the sight based on your floating pattern, then use a hand held chuck and a drill index #’s 1 thru 60, and incre- METHOD 1: Sight in the 20 yard pin, by moving the pin guard up, down, and side-to-side until the 20 yard pin is impact-
2 – 10-24 X 5/8” mounting screws
• Round Pin Guard With Alignment Ring mentally drill out the peep until you achieve a match. Always use a hand held drill chuck, never use an electric drill or it ing spot on. Then use the individual pin adjustments to sight in the other pins.
can bind up and potentially cut your string.
• Precision Installed Bubble & Wire METHOD 2: Sight in the 40 yard pin, by moving the pin guard up, down, and side-to-side until the 40 yard pin is impact-
• Individual Horizontal & Vertical Micro-Adjustable Pins PIN GAPS: The farther the sight is mounted from the bow the farther apart your pin gaps will be. The closer the sight is ing spot on. Then use the individual pin adjustments to sight in the other pins. Using this method the pins will have a
• Built out of Solid 6061 Air-Craft Aluminum mounted to the bow the tighter your pin gaps will be. more even spread across the pin guard.
STEP 3 – GANG ADJUSTMENT METHOD 3: Sight in the bubble as a 6th pin, by moving the pin guard up, down, and side-to-side until where the wire
STEP 1 – ASSEMBLING THE SIGHT HORIZONTAL: To move the whole pin guard left or right, loosen the meets the bubble, is impacting spot on for the distance desired (example: 70 yards). Then, use the individual pin adjust-
RIGHT HAND: Completely remove the ¼-20 vertical lock down screw ¼-20 lock down screw located on the mounting bar. Slide the center ments to sight in the other pins. Using this method, the pins will have a nice even spread and you will have an extra pin.
from the center. Slide the pin guard dovetail into the center until the to the desired location and tighten the lock down screw.
micro-nut lines up with the vertical lock down screw hole. The bubble TROUBLESHOOTING:
needs to be at the bottom and the micro-adjust knob on top of the pin VERTICAL: To move the whole pin guard up or down, loosen the ¼-20
guard. Insert the ¼-20 vertical clamping screw and tighten. lock down screw located on the center. Slide the center to the desired PINS DON’T LINE UP WITH THE WIRE: The horizontal setting of the arrow rest is tied to the bubble of the sight on all Solo
location and tighten back down the lock down screw. Cam & Single Cam bows. If the horizontal setting is not set correctly, you will find that when sighted in the pins don’t line
LEFT HAND: Completely remove both the ¼-20 vertical and the ¼-20 up with the wire. If from top to bottom, the pins are running right to left, you need to move your arrow rest to the right. If
horizontal lock down screws from the center and bar. Slide the center STEP 4 – INDIVIDUAL PIN ADJUSTMENTS from top to bottom, the pins are running left to right, you need to move the arrow rest to the left.
out of the bar, turn it around and slide it back into the mounting bars MAKE SURE ALL OF THE VERTICAL ADJUSTMENT SCREWS ARE TIGHT
dovetail. The knob is now on the opposite side of the bar, and the BEFORE SHOOTING, NEVER SHOOT WITH THE VERTICAL ADJUSTMENT ALLEN WRENCH UPKEEP: Using a good allen wrench when making adjustments to the sight can prolong the life of your
micro nut is lined up with the horizontal lock down screw. Slide the SCREWS LOOSE OR YOU WILL LOOSE A PIN & TURRET. screws dramatically. If the allen wrench starts to become worn/rounded it is recommended you grind off the worn/
pin guard dovetail into the center until the micro-nut lines up with the rounded portion. This will ensure you have full contact when making adjustments and reduce the likely hood of stripping
vertical lock down screw hole. The bubble needs to be at the bottom PIN ORDER: When sighting in your pins, you always want to start with your closest distance pin at the top and work your or rounding the head of the screw.
and the knob on top of the pin guard. Insert the ¼-20 vertical & way down to your longest distance pin on the bottom.
horizontal clamping screws and tighten. THE SPOT-HOGG GUARANTEE: We guarantee your sight to be of the finest quality and craftsmanship. All
HORIZONTAL PIN ADJUSTMENTS: When making large vertical adjust- sights come with a limited lifetime warranty. Should your sight become damaged, Spot-Hogg will fix or re-
CENTERING, THE ADVANCED AIMING TECHINIQUE: All Spot-Hogg ments to the pins you may find that the pin no longer lines up with the
place any part of the sight, excluding fiber optics. Scratches, dings, or dents, don’t apply. For any questions
sights come with round pin guards and white alignment rings. We wire. Each pin has a single button head screw, located at the rear of
the turret, for making horizontal micro-adjustments. Turning the screw
or comments regarding the Spot-Hogg Real Deal or warranty service on this product, contact us at.
have found that centering your pin guard in your peep is more ac-
curate, and easier to duplicate aiming process than trying to center clockwise will pull the pin into the turret and away from the wire. Turn-
ing the screw counter-clockwise will move the pin out of the turret and QUALITY: All of our sights are put through a 10 point inspection to insure that you get exactly what you want.
a single pin. When centering your pin guard, you are centering one
circle inside of a slightly larger circle making it easier to tell when you towards the wire. When making adjustments always apply pressure These state of the art sights are not only cosmetically clean, they are mechanically sound. We want the best
are slightly off center. Centering your guard will allow you to use a into the screw head with the allen key, so you don’t round out the for our bows and the best is what we provide for our customers
larger peep than you might normally use, which is an added benefit for screw head. There are no lock downs needed on the pins individual,
hunters, in those low light situations. With our round pin guard, you horizontal micro-adjust screws. 100% LIFETIME GUARANTEE: All pieces are milled out of 6061 aircraft aluminum, this means they are tough.
can have freestyle accuracy with a fixed pin sight. We stand behind our product, giving you the security of a 100% Lifetime Guarantee on all manufactures
VERTICAL PIN ADJUSTMENT: There are two 6-32 set screws desig-
defects. (Fiber optics not included in warranty.) Essentially you are investing in the last sight you will ever
STEP 2 – MOUNTING THE SIGHT TO THE BOW nated to each pin, located at the back of the pin guard. By loosening
one screw and tightening the other, you can move the pin up or down.
need.
The sight has three different sets of mounting holes. Insert the mounting screws into the desired holes and tighten to
the bow. The two threaded holes on the mounting bar are for a bow quiver. The mounting holes you choose, affect you in If you want to move the pin up, loosen the upper screw and tighten the lower. If you want to move the pin down, loosen
the lower screw and tighten the upper. Be sure you go back and snug the screw you loosened first to ensure it will not Spot-Hogg Archery Products • 125 Smith Street • Harrisburg, OR 97446
multiple ways.
come loose. Tel: 888-302-7768 (toll free) Fax: 541-995-3702
E-Mail: info@spot-hogg.com Web: www.Spot-Hogg.com
NT E
Ra Im
y
aR T
W LIFE
QUALITY PRODUCTS THAT LAST A LIFETIME
Request a catalog or visit us on-line at spot-hogg.com to learn more about our full line of products. REaL dEaL
FIBER OPTIC PIN SIGHT
Shown with optional Hogg Wrap and 5 pin Small Guard
The REAL DEAL features five individually micro-adjustable fiber optic
pins available in three sizes, .019, .029, and .039. The windage and
elevation gang adjustments are also micro-adjustable with easy to
REAL DEAL
use knobs. The heavy duty clamping system is guaranteed to keep
WHammy everything locked in place once you are sighted in.
HOGG FaTHER
The rugged all-metal REAL DEAL is sturdy, easy to adjust, and perfect
for any archer. Whether you put it on your tournament bow, or your
favorite hunting bow, it is guaranteed to be accurate, easy to adjust,
and the most reliable sight you will ever own.
ROVER 5 individually micro-ad- Precision installed level
justable fiber optic pins and aiming wire
W I N da G E a N d E L E VaT I O N
BOSS HOGG TOmmy HOGG A round pin guard for more White alignment ring
precise aiming
Weight: 6.5 oz
Micro-adjustable windage
PLaTINUm and elevation
HOGG-IT HUNTER
INFINITy
125 Smith Street • PO Box 226 • Harrisburg, OR 97446
E-mail: info@spot-hogg.com www.spot-hogg.com
REaL dEaL RIGHT ON
PH: 888-302-7768 Fax: 541-995-6370
FRIday SaTURday CaSCadE W 3 5 7 LG SG 10 19 29 CU
NIGHT NIGHT mOdEL
dELIGHT SPECIaL 10 PREmIER made in the u.s.a
THE TOUGHEST aRCHERy SIGHTS IN THE WORLd
REAL DEAL OWNERS MANUAL HOLDING STEADY: The closer the sight is to the bow, the steadier it will appear on the target. The farther the sight is from
the bow, the harder it will be to hold steady on the target. It is recommended that when choosing the mounting location,
MAKING SMALL VERTICAL ADJUSTMENTS EXAMPLE: Insert the allen wrench into the screw so the allen handle is dog
legged to 12 o’clock. As you loosen the screw, the allen handle will jump to about 10 to 11 o’clock. Tighten it back to
use the holes that allow you to float the size of the spot at the farthest distance you intend to shoot. This will allow you 11:30, then remove the allen wrench. Insert it into the other screw and tighten the last ½ hour the rest of the way up. By
The Spot-Hogg Real Deal sight, is the most ruggedly built sight in the world. Its industrial strength dovetail to achieve good shot execution rather than punching the release as it floats by the spot. using this method you can move the pin in as small as ¼ of a fiber optic.
design, gives it unmatched strength. Easy to use micro-adjustable knobs and heavy duty clamping screws,
guarantee your gang adjustments will not come loose. Just tighten the screws and enjoy the security of PEEP ALIGNMENT: Peep alignment with the white sticker on the pin guard, will change depending on where the sight STEP 5 – SIGHTING IN
knowing it will be there when you need it. This sight is for serious shooters who want the best. is mounted. It is strongly recommended when choosing your mounting location that the peep & pin guard have a nice CHOOSE A METHOD: When starting out you will want to use one of the methods listed below to make sure you achieve
concentric match. So when looking through the peep, the outside diameter of the field of view, just catches the white the desired settings based on your application. The individual horizontal pin adjustments are only used to keep the pin
STANDARD FEATURES PARTS LIST alignment ring on the pin guard. splitting the wire. Use the gang horizontal micro-adjustment for all general left and right impact point adjustments.
• Heavy Duty Clamping Screws 1 – Pin guard with pins, fiber optics, and Hogg
THERE ARE TWO WAYS OF ACHIEVING PEEP AND PIN GUARD ALIGNMENT. Depending on which method you choose, will depend on how you use the gang vertical micro-adjust for sighting in. There
• Industrial Strength Dovetail Wrap (optional) already installed
• By changing peep size and moving the sights mounting location in and out, you should be able to get a good match is a multitude of different methods for sighting in, listed below are the three most popular.
• Horizontal & Vertical Gang 1 – Bar & Center ¼-20 screws already assembled between the peep and pin guard.
Micro-Adjustment With Knobs • Mount the sight based on your floating pattern, then use a hand held chuck and a drill index #’s 1 thru 60, and incre- METHOD 1: Sight in the 20 yard pin, by moving the pin guard up, down, and side-to-side until the 20 yard pin is impact-
2 – 10-24 X 5/8” mounting screws
• Round Pin Guard With Alignment Ring mentally drill out the peep until you achieve a match. Always use a hand held drill chuck, never use an electric drill or it ing spot on. Then use the individual pin adjustments to sight in the other pins.
can bind up and potentially cut your string.
• Precision Installed Bubble & Wire METHOD 2: Sight in the 40 yard pin, by moving the pin guard up, down, and side-to-side until the 40 yard pin is impact-
• Individual Horizontal & Vertical Micro-Adjustable Pins PIN GAPS: The farther the sight is mounted from the bow the farther apart your pin gaps will be. The closer the sight is ing spot on. Then use the individual pin adjustments to sight in the other pins. Using this method the pins will have a
• Built out of Solid 6061 Air-Craft Aluminum mounted to the bow the tighter your pin gaps will be. more even spread across the pin guard.
STEP 3 – GANG ADJUSTMENT METHOD 3: Sight in the bubble as a 6th pin, by moving the pin guard up, down, and side-to-side until where the wire
STEP 1 – ASSEMBLING THE SIGHT HORIZONTAL: To move the whole pin guard left or right, loosen the meets the bubble, is impacting spot on for the distance desired (example: 70 yards). Then, use the individual pin adjust-
RIGHT HAND: Completely remove the ¼-20 vertical lock down screw ¼-20 lock down screw located on the mounting bar. Slide the center ments to sight in the other pins. Using this method, the pins will have a nice even spread and you will have an extra pin.
from the center. Slide the pin guard dovetail into the center until the to the desired location and tighten the lock down screw.
micro-nut lines up with the vertical lock down screw hole. The bubble TROUBLESHOOTING:
needs to be at the bottom and the micro-adjust knob on top of the pin VERTICAL: To move the whole pin guard up or down, loosen the ¼-20
guard. Insert the ¼-20 vertical clamping screw and tighten. lock down screw located on the center. Slide the center to the desired PINS DON’T LINE UP WITH THE WIRE: The horizontal setting of the arrow rest is tied to the bubble of the sight on all Solo
location and tighten back down the lock down screw. Cam & Single Cam bows. If the horizontal setting is not set correctly, you will find that when sighted in the pins don’t line
LEFT HAND: Completely remove both the ¼-20 vertical and the ¼-20 up with the wire. If from top to bottom, the pins are running right to left, you need to move your arrow rest to the right. If
horizontal lock down screws from the center and bar. Slide the center STEP 4 – INDIVIDUAL PIN ADJUSTMENTS from top to bottom, the pins are running left to right, you need to move the arrow rest to the left.
out of the bar, turn it around and slide it back into the mounting bars MAKE SURE ALL OF THE VERTICAL ADJUSTMENT SCREWS ARE TIGHT
dovetail. The knob is now on the opposite side of the bar, and the BEFORE SHOOTING, NEVER SHOOT WITH THE VERTICAL ADJUSTMENT ALLEN WRENCH UPKEEP: Using a good allen wrench when making adjustments to the sight can prolong the life of your
micro nut is lined up with the horizontal lock down screw. Slide the SCREWS LOOSE OR YOU WILL LOOSE A PIN & TURRET. screws dramatically. If the allen wrench starts to become worn/rounded it is recommended you grind off the worn/
pin guard dovetail into the center until the micro-nut lines up with the rounded portion. This will ensure you have full contact when making adjustments and reduce the likely hood of stripping
vertical lock down screw hole. The bubble needs to be at the bottom PIN ORDER: When sighting in your pins, you always want to start with your closest distance pin at the top and work your or rounding the head of the screw.
and the knob on top of the pin guard. Insert the ¼-20 vertical & way down to your longest distance pin on the bottom.
horizontal clamping screws and tighten. THE SPOT-HOGG GUARANTEE: We guarantee your sight to be of the finest quality and craftsmanship. All
HORIZONTAL PIN ADJUSTMENTS: When making large vertical adjust- sights come with a limited lifetime warranty. Should your sight become damaged, Spot-Hogg will fix or re-
CENTERING, THE ADVANCED AIMING TECHINIQUE: All Spot-Hogg ments to the pins you may find that the pin no longer lines up with the
place any part of the sight, excluding fiber optics. Scratches, dings, or dents, don’t apply. For any questions
sights come with round pin guards and white alignment rings. We wire. Each pin has a single button head screw, located at the rear of
the turret, for making horizontal micro-adjustments. Turning the screw
or comments regarding the Spot-Hogg Real Deal or warranty service on this product, contact us at.
have found that centering your pin guard in your peep is more ac-
curate, and easier to duplicate aiming process than trying to center clockwise will pull the pin into the turret and away from the wire. Turn-
ing the screw counter-clockwise will move the pin out of the turret and QUALITY: All of our sights are put through a 10 point inspection to insure that you get exactly what you want.
a single pin. When centering your pin guard, you are centering one
circle inside of a slightly larger circle making it easier to tell when you towards the wire. When making adjustments always apply pressure These state of the art sights are not only cosmetically clean, they are mechanically sound. We want the best
are slightly off center. Centering your guard will allow you to use a into the screw head with the allen key, so you don’t round out the for our bows and the best is what we provide for our customers
larger peep than you might normally use, which is an added benefit for screw head. There are no lock downs needed on the pins individual,
hunters, in those low light situations. With our round pin guard, you horizontal micro-adjust screws. 100% LIFETIME GUARANTEE: All pieces are milled out of 6061 aircraft aluminum, this means they are tough.
can have freestyle accuracy with a fixed pin sight. We stand behind our product, giving you the security of a 100% Lifetime Guarantee on all manufactures
VERTICAL PIN ADJUSTMENT: There are two 6-32 set screws desig-
defects. (Fiber optics not included in warranty.) Essentially you are investing in the last sight you will ever
STEP 2 – MOUNTING THE SIGHT TO THE BOW nated to each pin, located at the back of the pin guard. By loosening
one screw and tightening the other, you can move the pin up or down.
need.
The sight has three different sets of mounting holes. Insert the mounting screws into the desired holes and tighten to
the bow. The two threaded holes on the mounting bar are for a bow quiver. The mounting holes you choose, affect you in If you want to move the pin up, loosen the upper screw and tighten the lower. If you want to move the pin down, loosen
the lower screw and tighten the upper. Be sure you go back and snug the screw you loosened first to ensure it will not Spot-Hogg Archery Products • 125 Smith Street • Harrisburg, OR 97446
multiple ways.
come loose. Tel: 888-302-7768 (toll free) Fax: 541-995-3702
E-Mail: info@spot-hogg.com Web: www.Spot-Hogg.com
NT E
Ra Im
y
aR T
W LIFE
QUALITY PRODUCTS THAT LAST A LIFETIME
Request a catalog or visit us on-line at spot-hogg.com to learn more about our full line of products. RIGHT ON
FIBER OPTIC PIN SIGHT
Shown with optional Hogg Wrap and 5 pin Small Guard
The basics are sometimes the best. Industrial strength dovetail ad-
justments that easily slide, and clamp down with heavy duty screws.
None of that finger tight stuff. Once you set this sight you can be
RIGHT ON
confident that it will be there when you need it.
WHammy
HOGG FaTHER
BUILT
Virtually indestructible!
The Right On is truly a cousin to the Real Deal. Giving you a round
pin guard with a white alignment ring, a vertical wire for aligning on
the front shoulder of an animal, a level that is precision installed to TO LAST
be perpendicular to the wire, and each pin is micro-adjustable. STRONGEST
dOVETaIL
• Heavy Duty Clamping • Precision Installed CLamPING
ROVER Screws Bubble & Wire SySTEm
aVaILaBLE
• Industrial Strength Dovetail • Individual Horizontal & Verti-
• Horizontal & Vertical Gang cal Micro-Adjustable Pins
BOSS HOGG TOmmy HOGG
Adjustment • Built out of Solid 6061 SOLId
a L U mI N U m
• Round Pin Guard With Air-Craft Aluminum CONSTRUCTION
Alignment Ring
PLaTINUm
5
mICRO
HOGG-IT HUNTER adjUSTaBLE
FIBER OPTIC
PINS
INFINITy
125 Smith Street • PO Box 226 • Harrisburg, OR 97446
E-mail: info@spot-hogg.com www.spot-hogg.com
REaL dEaL RIGHT ON
PH: 888-302-7768 Fax: 541-995-6370
FRIday SaTURday CaSCadE W 3 5 7 LG SG 10 19 29 CU
NIGHT NIGHT mOdEL
dELIGHT SPECIaL 10 PREmIER
made in the u.s.a
THE TOUGHEST aRCHERy SIGHTS IN THE WORLd
RIGHT ON OWNERS MANUAL PEEP ALIGNMENT: Peep alignment with the white sticker on the pin guard, will change depending on where the sight
STEP 5 – SIGHTING IN
CHOOSE A METHOD: When starting out you will want to use one of the methods listed below to make sure you achieve
is mounted. It is strongly recommended when choosing your mounting location that the peep & pin guard have a nice the desired settings based on your application. The individual horizontal pin adjustments are only used to keep the pin
The Spot-Hogg Right On sight, is the most ruggedly built sight in the world. Its industrial strength dovetail concentric match. So when looking through the peep, the outside diameter of the field of view, just catches the white splitting the wire. Use the gang horizontal micro-adjustment for all general left and right impact point adjustments.
design, gives it unmatched strength. Heavy duty clamping screws, guarantee your gang adjustments will not alignment ring on the pin guard.
come loose. Just tighten the screws and enjoy the security of knowing it will be there when you need it. This Depending on which method you choose, will depend on how you use the gang vertical micro-adjust for sighting in. There
sight is for serious shooters who want the best. THERE ARE TWO WAYS OF ACHIEVING PEEP AND PIN GUARD ALIGNMENT. is a multitude of different methods for sighting in, listed below are the three most popular.
• By changing peep size and moving the sights mounting location in and out, you should be able to get a good match
STANDARD FEATURES PARTS LIST between the peep and pin guard. METHOD 1: Sight in the 20 yard pin, by moving the pin guard up, down, and side-to-side until the 20 yard pin is impact-
• Heavy Duty Clamping Screws 1 – Pin guard with pins, fiber optics, and Hogg • Mount the sight based on your floating pattern, then use a hand held chuck and a drill index #’s 1 thru 60, and incre- ing spot on. Then use the individual pin adjustments to sight in the other pins.
mentally drill out the peep until you achieve a match. Always use a hand held drill chuck, never use an electric drill or it
• Industrial Strength Dovetail Wrap (optional) already installed
can bind up and potentially cut your string. METHOD 2: Sight in the 40 yard pin, by moving the pin guard up, down, and side-to-side until the 40 yard pin is impact-
• Horizontal & Vertical Gang Adjustment 1 – Bar & Center ¼-20 screws ing spot on. Then use the individual pin adjustments to sight in the other pins. Using this method the pins will have a
• Round Pin Guard With Alignment Ring already assembled PIN GAPS: The farther the sight is mounted from the bow the farther apart your pin gaps will be. The closer the sight is more even spread across the pin guard.
mounted to the bow the tighter your pin gaps will be.
• Precision Installed Bubble & Wire 2 – 10-24 X 5/8” mounting screws METHOD 3: Sight in the bubble as a 6th pin, by moving the pin guard up, down, and side-to-side until where the wire
• Individual Horizontal & Vertical STEP 3 – GANG ADJUSTMENT meets the bubble, is impacting spot on for the distance desired (example: 70 yards). Then, use the individual pin adjust-
Micro-Adjustable Pins HORIZONTAL: To move the whole pin guard left or right, loosen the ¼-20 lock down screw located on the mounting bar. ments to sight in the other pins. Using this method, the pins will have a nice even spread and you will have an extra pin.
• Built out of Solid 6061 Air-Craft Aluminum Slide the center to the desired location and tighten the lock down screw.
TROUBLESHOOTING:
VERTICAL: To move the whole pin guard up or down, loosen the ¼-20
STEP 1 – ASSEMBLING THE SIGHT lock down screw located on the center. Slide the center to the desired PINS DON’T LINE UP WITH THE WIRE: The horizontal setting of the arrow rest is tied to the bubble of the sight on all Solo
RIGHT HAND: Slide the pin guard dovetail into the center, and tighten location and tighten back down the lock down screw. Cam & Single Cam bows. If the horizontal setting is not set correctly, you will find that when sighted in the pins don’t line
the ¼-20 vertical clamping screw. The bubble needs to be at the bot- up with the wire. If from top to bottom, the pins are running right to left, you need to move your arrow rest to the right. If
tom of the pin guard. STEP 4 – INDIVIDUAL PIN ADJUSTMENTS from top to bottom, the pins are running left to right, you need to move the arrow rest to the left.
MAKE SURE ALL OF THE VERTICAL ADJUSTMENT SCREWS ARE TIGHT
LEFT HAND: Loosen the ¼-20 horizontal lock down screw. Slide the BEFORE SHOOTING, NEVER SHOOT WITH THE VERTICAL ADJUSTMENT ALLEN WRENCH UPKEEP: Using a good allen wrench when making adjustments to the sight can prolong the life of your
center out of the bar, turn it around and slide it back into the mount- SCREWS LOOSE OR YOU WILL LOOSE A PIN & TURRET. screws dramatically. If the allen wrench starts to become worn/rounded it is recommended you grind off the worn/
ing bars dovetail and tighten. The head of the ¼-20 lock down screw rounded portion. This will ensure you have full contact when making adjustments and reduce the likely hood of stripping
is now on the opposite side of the bar. Slide the pin guard dovetail PIN ORDER: When sighting in your pins, you always want to start with or rounding the head of the screw.
into the center, and tighten the ¼-20 vertical clamping screw. The your closest distance pin at the top and work your way down to your
bubble needs to be at the bottom of the pin guard. longest distance pin on the bottom.
THE SPOT-HOGG GUARANTEE: We guarantee your sight to be of the finest quality and craftsmanship. All
CENTERING, THE ADVANCED AIMING TECHINIQUE: All Spot-Hogg HORIZONTAL PIN ADJUSTMENTS: When making large vertical adjustments to the pins you may find that the pin no longer
sights come with a limited lifetime warranty. Should your sight become damaged, Spot-Hogg will fix or re-
sights come with a round pin guard and white alignment ring. We lines up with the wire. Each pin has a single button head screw, located at the rear of the turret, for making horizontal
micro-adjustments. Turning the screw clockwise will pull the pin into
place any part of the sight, excluding fiber optics. Scratches, dings, or dents, don’t apply. For any questions
have found that centering your pin guard in your peep, is more accu- or comments regarding the Spot-Hogg Real Deal or warranty service on this product, contact us at.
rate, and easier to duplicate the aiming process, than trying to center the turret and away from the wire. Turning the screw counter-clockwise
a single pin. When centering your pin guard, you are centering one will move the pin out of the turret and towards the wire. When making
circle inside a slightly larger circle, making it easier to tell when you adjustments always apply pressure into the screw head with the allen
are slightly off center. Centering your guard, will allow you to use a key, so you don’t round out the screw head. There are no lock downs QUALITY: All pieces are milled out of 6061 aircraft aluminum. All of our sights are put through a 10-point
larger peep than you might normally use, which is an added benefit for needed on the pins individual, horizontal micro-adjust screws. inspection to ensure you get exactly what you want. These state of the art sights are not only cosmetically
hunters, in those low light situations. With our round pin guard, you clean, they are mechanically sound. We want the best for our bows, and the best is what we provide for our
can have freestyle accuracy with a fixed pin sight. VERTICAL PIN ADJUSTMENT: There are two 6-32 set screws desig- customers.
nated to each pin, located at the back of the pin guard. By loosening
STEP 2 – MOUNTING THE SIGHT TO THE BOW one screw and tightening the other, you can move the pin up or down.
If you want to move the pin up, loosen the upper screw and tighten
100% LIFETIME GUARANTEE: We stand behind our product, giving you the security of a 100% Lifetime Guar-
The sight has three different sets of mounting holes. Insert the mount- antee on all manufactures defects. (Fiber optics not included in warranty.) Essentially you are investing in
ing screws into the desired holes and tighten to the bow. The two the lower. If you want to move the pin down, loosen the lower screw
and tighten the upper. Be sure you go back and snug the screw you the last sight you will ever need.
threaded holes on the mounting bar are for a bow quiver. The mount-
ing holes you choose, affect you in multiple ways. loosened first to ensure it will not come loose.
Spot-Hogg Archery Products • 125 Smith Street • Harrisburg, OR 97446
HOLDING STEADY: The closer the sight is to the bow, the steadier it will appear on the target. The farther the sight is from MAKING SMALL VERTICAL ADJUSTMENTS EXAMPLE: Insert the allen Tel: 888-302-7768 (toll free) Fax: 541-995-3702
the bow, the harder it will be to hold steady on the target. It is recommended that when choosing the mounting location, wrench into the screw so the allen handle is dog legged to 12 o’clock. As you loosen the screw, the allen handle will E-Mail: info@spot-hogg.com Web: www.Spot-Hogg.com
use the holes that allow you to float the size of the spot at the farthest distance you intend to shoot. This will allow you jump to about 10 to 11 o’clock. Tighten it back to 11:30, then remove the allen wrench. Insert it into the other screw
to achieve good shot execution rather than punching the release as it floats by the spot. and tighten the last ½ hour the rest of the way up. By using this method you can move the pin in as small as ¼ of a fiber
optic.
