Get documents about "MATTRESSES
Document Sample
2010
MATTRESSES
www.empiremedicalsolutions.com
Medical equipment new and reconditioned
Lowest prices
Large selection of equipment
EMPIRE MEDICAL SOLUTIONS CA LL T O O RD ER 7 0 4 - 90 0- 02 81
WWW.EMP IR EMED IC ALSOLUT IONS.COM
Table of Contents
Foam Mattress Systems 4—12
Air Mattress Systems 13—24
Air and Water Overlay Systems 25—28
Gel Overlay Systems 29—30
Replacement Stretcher Mattresses 31
Patient Accessories 32
49/16/2010 9/16/2010 11:20 AM4
FOAM MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Home Care Elite® Model BCHM760
Designed for use in Nursing Homes, Hospitals, and Institutions. The inner core is a
high density, fire-retardant polyurethane foam that is covered with an anti-microbial,
fire-retardant material meeting California Technical Bulletin #117. The mattress is
closed with a self-ventilating zipper, and can be special ordered for use in prisons and
psychiatric areas utilizing an inverted lock-stitch closure.
Single layer of high-density foam encased in a zippered medical grade vinyl cover
providing superior patient comfort.
The Home-Care Elite® is covered with a zippered medical grade vinyl material. The
cover is fluid proof, anti-microbial, fire-retardant and stain resistant. The cover
material and foam core meet California Technical Bulletin #117 for fire retardancy.
Mattress can be manufactured to meet California Technical Bulletin #129, Boston Fire
Code 1X-11 and Federal Flammability Standard
16 CFR 1633 when specified.
Dimensions:
Model BCHM760 36” x 76” x 5.5
Zipper Cover: Medical grade Vinyl
Weight Capacity: Supports 250 lbs.
Custom Sizes Available:
Model BCHM 760 36” x 76” x 5.5”
Model BCHM 780 36” x 80” x 5.5”
Model BCHM 784 36” x 84” x 5.5”
Model BCHM 742 42” x 80” x 7”
Warranty:
Cushion: 12 Months
Page 4
5
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
FOAM MATTRESSES
Relief-Care Pro® Model BCHTM
It uses advanced Surface Modification Technology to create a clinically effective
support surface. SMT™ enables Blue Chip to produce a therapeutic dual-zone VPF®
variable pressure foam support surface with varying features and properties. This
engineering advancement provides proper pressure redistribution surface that offers
the patient a clinically effective mattress with low interface pressures. This design
absorbs and redistributes the patient's weight to provide greater comfort, maximum
support and proper pressure redistribution around bony prominences.
The mattress is covered with a Vyvex-I® top cover and a medical grade vinyl bottom
cover. Vyvex-I® is a low shear, fluid proof nylon material which is anti-microbial, fire-
retardant, stain resistant and washable. The foam core and cover meet California
Technical Bulletin 117 for fire retardancy. The mattress can be manufactured to meet
California Technical Bulletin #129, Boston Fire Code 1X-11 and Federal Flammability
Standard 16 CFR 1633 when specified. Cover is loose fitting & will conform to the
patient.
SMT® technology creates an advanced pressure redistribution support surface that
provides unlimited comfort zones.
Dimensions:
Model BCHTM860 36” x 76”
Zippered Top Cover: Vyvex-1®
Bottom Cover: Medical Grade Vinyl
Weight Capacity: Supports up to 300
lbs.
Custom Sizes Available:
Model BCHTM860 36” x 80” x 5.5”
Model BCHTM880 36” x 80” x 5.5”
Model BCHTM884 36” x 84” x 5.5”
Model BCHTM882 36” x 84” x 5.5”
Warranty:
Cushion: 12 Months
Page 5
69/16/2010 9/16/2010 11:20 AM6
FOAM MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Pre-Vent Series® Pressure Redistribution Mattress
Our unique shapes together with our Med-Flex® VPF™ foams, react instinctively to a
compression set, allowing for a fully automatic, totally zoned surface. Other
manufacturers’ surfaces are zone specific and must always take into consideration a
patients weight, size (build) and shape. Blue Chip’s patent pending Sphere® and
Hexon® designs act independently as its own self-adjusting, pressure-redistribution
zone. Every component undergoes a strict protocol to ensure clinical efficacy,
infection control standards and durability for the life of the mattress.
CORE FOAMS
VPF™ (Variable Pressure Foaming) Manufacturing Process
It is the most modern manufacturing process used today. This process, known as
Chamber Technology, uses an enclosed controlled environment rather than a
traditional open-line pour. Chamber Technology allows for the precision control of
atmospheric pressures during manufacturing adding to the purity of the foam’s cell
structure. This method greatly reduces the sag factor (deflection), thereby enhancing
the product’s life and extending the uncompromised pressure-redistribution qualities
of our foam mattress systems. VPF™ technology enables Blue Chip to warranty the
longevity of our Pre-Vent Series™ mattresses to outlast all other conventional
mattress systems.
Med-Flex® VPF™ Foam Formulation
It is our exclusive formulation made from a much higher polymer fill content in
respect to conventionally poured foams. In conjunction with Chamber Technology
Med-Flex® VPF™ foam produces a longer lasting, softer cell structure, yielding greater
support without compromising true foam comfort. Med-Flex® VPF™ foam allows us to
produce variable densities and IFDs’ (indentation force deflection), which are stronger
in strength (tensile), and provide overall durability factors never realized in a medical
mattress application. The Med-Flex® VPF™ foam height retention loss is virtually
eliminated, offering effective clinical outcomes over its entire life. All Med-Flex® VPF™
foam’s are anti-microbial and fire retardant.
Page 6
7
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
FOAM MATTRESSES
SURFACE TECHNOLOGY
The Sphere®
The patent-pending anatomically inspired sphere shape
offers the most unique design the therapeutic support
surface industry has ever seen. The sphere® design is
clinically effective in redistributes the interface pressures
which create pressure sores. Compressing the sphere down
expands the surface area into a flat pressure-redistribution
surface to evenly distribute and support the patient’s weight
across the entire mattress surface. Each sphere® acts independently as its own self-
adjusting pressure-redistribution zone. As the body moves across the mattress, the
spheres’ touch points help stimulate blood flow. The sphere® design permits air
circulation, reducing heat build-up which provides a much cooler, more comfortable
support surface.
Hexon® SMT™ (Surface Modification Technology)
Surface modification technology enables Blue Chip to
produce a single piece of polyurethane foam with varying
features and properties. We can alter the surface pattern,
size, space, position, level and depth of cut. This engineering
advancement produces a pressure-relieving surface that
gives unlimited comfort zones never thought possible in a
single piece of foam. SMT™ allows the Hexon® design to be
stronger and more supportive with a greater surface area than conventional foam
convolution. This design absorbs and distributes the impact-weight of the body to
provide greater comfort, maximum support and to redistributes pressure around bony
prominences.
Page 7
89/16/2010 9/16/2010 11:20 AM8
FOAM MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
FEATURES
Heel Wrap® VPF™ Foam
Exclusive Heel Wrap® VPF™ foam is incorporated in
the top layer of every Pre-Vent Series® mattress
system for maximum prevention of heel ulcers. For
years, heel pillows have been buried beneath the
top surface of the mattress. Blue Chip’s Heel Wrap®
VPF™ foam was brought to the surface to replace
the fiber/foam pillow with individual, self-adjusting,
pressure-redistribution zones. Heel Wrap® VPF™
foam provides a cradle of comfort and support in the Sphere® Heel Hexon® Heel
sensitive heel area with a softer foam that is more
durable than conventional fiber/foam heel pillows.
Barrier Lok™ Infection Control System
Virtually seals and protects the inner foam core of
the mattress by preventing the leaching of fluids
from penetrating the perimeter seam of the
mattress. The Barrier Lok® ensures that infection
control standards are maintained, thereby providing
investment protection on all Pre-Vent Series®
mattress systems.
Dual-Protection Slip Layer
Our silk film slip layer eliminates friction between the
inner foam core and the top cover. This allows both
surfaces to move independently against one another
extending the life of the mattress. In addition, the
special silk film offers added protection against the
leeching of fluids to the inner foam core.
Anti-Microbial Protection
All Med-Flex® VPF™ foams and Vyvex® mattress
coverings are anti-microbial and effectively protect
against bacterial growth. The anti-microbial additive
used is proven to be effective against a wide spectrum
of micro-organisms, including (MRSA), mold, mildew,
staining and odors caused by fungal organisms.
Page 8
9
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
FOAM MATTRESSES
Pre-Vent Supreme Pressure Relieving Model BCSU
• Tri-Laminate Design
• Perfectly matched Med-Flex® VPF™ foams throughout all layers
• Fully automatic, totally zoned mattress surface
• Patent pending pressure-redistribution Sphere® design top layer
• Exclusive Heel Wrap® VPF™ foam incorporated in top layer for maximum prevention
of heel ulcers
• Exclusive pressure redistribution Hexon® center
• High density anatomically inspired Hexon® bottom layer
• Vyvex II® Nylon, fluid proof top cover
• Barrier Lok® infection control system
• All Med-Flex® VPF™ foams and cover materials are anti-microbial and fire retardant
Dimensions:
Top Cover: Vyvex II®
Bottom Cover: 9oz. Tri-laminate Vinyl
Weight Capacity: Support 350 lbs.
Custom Sizes Available:
Model BCSU3676 36” x 76” x 6.25”
Model BCSU3680 36” x 80” x 6.25”
Model BCSU3684 36” x 84” x 6.25”
Warranty:
7 year non-prorated warranty
Page 9
109/16/2010 9/16/2010 11:20 AM10
FOAM MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Pre-vent Elite Pressure Relieving Model BCEL
• Tri-Laminate Design
• Perfectly matched Med-Flex® VPF™ foams throughout all layers
• Dual layer exclusive pressure-redistribution Hexon® design
• Exclusive Heel Wrap® VPF™ foam incorporated in top layer for prevention of heel
ulcers
• High density Med-Flex® VPF™ foam bottom
• Vyvex II® Nylon, fluid proof top cover
• Barrier Lok® infection control system
• All Med-Flex® VPF™ foams and cover materials are anti-microbial and fire retardant
Dimensions:
Top Cover: Vyvex II®
Bottom Cover: 9oz. Tri-laminate Vinyl
Weight Capacity: Support 350 lbs. - Bariatric up to 1000 lbs.
Custom Sizes Available:
Model BCEL3676 36” x 76” x 6”
Model BCEL3680 36” x 80” x 6”
Model BCEL3684 36” x 84” x 6”
Model BCEL4280BAR 42” x 80” x 7”
Model BCEL4880BAR 48” x 80” x 7”
Warranty:
6 year non-prorated warranty
Page 10
11
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
FOAM MATTRESSES
Pre-vent Pro Pressure Relieving Model BCPR
• Tri-Laminate Design
• Perfectly matched Med-Flex® VPF™ foams throughout all layers
• Exclusive pressure-redistribution Hexon® top layer
• Exclusive Heel Wrap® VPF™ foam incorporated in top layer for maximum prevention
of heel ulcers
• Med-Flex® VPF™ foam pressure-redistribution center
• High-density Med-Flex® VPF™ foam bottom
• Vyvex I® Nylon, fluid proof top cover
• Barrier Lok® infection control system
• All Med-Flex® VPF™ foams and cover materials are anti-microbial and fire retardant
Dimensions:
Top Cover: Vyvex I®
Bottom Cover: 9oz. Tri-laminate Vinyl
Weight Capacity: Support 350 lbs.
Custom Sizes Available:
Model BCPR3676 36” x 76” x 6.25
Model BCPR3680 36” x 80” x 6.25
Model BCPR3684 36” x 84” x 6.25
Warranty:
5 year non-prorated warranty
Page 11
129/16/2010 9/16/2010 11:20 AM12
FOAM MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
COVERS
Vyvex-lll®
Vyvex-lll® is a 4-way stretch urethane coated fabric with a low moisture vapor
transmission rate (MVTR). A low MVTR is desired for the benefit of infection control
and the wicking of fluids away from the skin. Vyvex-lll® is fluid proof and offers low-
shear, low-friction protection, is anti-microbial, fire retardant, stain resistant and
washable. This cover features Blue Chip’s exclusive Barrier Lok™ infection control
system. Vyvex-lll® is standard on the Suspension Pre-Vent Series® mattress system
and is available as an option on all other models.
Vyvex-ll® • Vyvex-l®
Vyvex-ll® is Nylon Butyl-backed; Vyvex-l® is a Nylon Vinyl-backed top cover with a low
moisture vapor transmission rate. Vyvex-ll® and Vyvex-l® are both fluid proof and
offer low-shear, low-friction protection and are anti-microbial, fire retardant, stain
resistant and washable. This cover features Blue Chip’s exclusive Barrier Lok™
infection control system. Vyvex-ll® is standard on the Supreme and Elite Pre-Vent
Series® mattress systems. Vyvex-l® is standard on the Pro Pre-Vent Series® mattress
system.
Page 12
13
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Supreme Air™ Mattress System- Model 9600
Alternating Air Floatation Mattress System
The Supreme Air™ Alternating Pressure Low Air Loss Mattress System combines the
most advanced technology and clinically effective features in a portable system. The
mattress utilizes 16 independent 8" deep air cells to provide pressure redistribution for
the prevention and treatment of Stages I-IV pressure ulcers. User friendly controls and
ease of setup make Supreme Air™ ideal for institutional use and the home bound
patient. Cover is loose fitting and will conform to the patient. The mattress was
designed to fit all standard hospital beds. Supreme Air™ supports patients weighing up
to 350 lbs. Supreme Air™ meets California Technical Bulletin #117 for fire retardancy.
An optional fire barrier is available to meet the most stringent fire safety requirements
when requested.
Cover:
Vyvex III® multi-directional stretch fabric
transfers moisture away from the patient’s
skin. The cover is low shear, washable, anti-
microbial, fluid resistant and fire retardant.
Cover is loose fitting and will conform to the
patient. Bladders:
Ventilated low air loss bladders include
CPR Valve: 40 air holes in sacral & torso areas to
CPR Valve quickly deflates mattress system help minimize skin maceration by
for medical emergencies. A simple twist reducing excess moisture under patient.
releases the air immediately. This multi- Air cells are constructed of laminated
purpose CPR Valve can be used to inflate or medical grade nylon & (TPU) thermal
deflate the mattress with our optional polyurethane fabrics. This combination
blower pump. ensures strength, durability & patient
comfort.
Page 13
149/16/2010 9/16/2010 11:20 AM14
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
PUMP CONTROL UNIT FEATURES:
Control Unit includes two modes of operation:
Alternating pressure provides the therapeutic
benefit of reactive hyperemia and redistributes
pressure well below 32mmHg.
Static mode provides gentle low air loss with
constant pressure redistribution and support. This
allows nursing to perform patient care.
Control dial adjusts mattress from soft to firm for
patient comfort.
Low Pressure Alert and Auto Alarm System offers
dual protection to notify caregiver in case of power
outages or accidental disconnection of hoses.
Deluxe adjustable hanger brackets secure
control unit to fit all makes of hospital beds.
Easy access filter reduces damaging dust
particles for maintenance free use.
Transport locking device insures mattress
remains inflated during a power outage or
for patient transport. Reinforced hoses
prevent air restriction due to kinking.
The optional blower pump can inflate or deflate the mattress through the
multi-purpose CPR valve in under four minutes. This reduces waiting time
for therapeutic treatment to begin.
Page 14
15
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Supreme Air ® - Model 9600 Mattress only Supreme Air ® - Model 9601 Pump only
Dimensions: 35” x 80” x 8” Dimensions: 12.5L" x 9W" x 4.5H"
Cover: Vyvex-III® Weight:7 lbs.
Weight Capacity: Support 350 lbs. Electrical:120V 60 Hz
Air Cells: Cycle Time:10 Minutes
16 - 8 " sacs Air Flow:6.5 - 9.5 Liters per minute
13 Alternating pressure cells Current Usage: less than 100 micro amps
10 Low air loss cells with air holes Ground Resistance:0.1 ohms maximum
3 Static cells in head section Power Cord:12 ft. cord
Warranty: Construction: ABS fire retardant UL 94V-0
Mattress:1 year limited Warranty: Pumps:1 Year limited
Cover: 6 months limited
Apollo 3-Port™ Mattress System- Model 4600
Alternating Pressure Mattress System with Low Air Loss
The Apollo 3-PortTM Alternating Pressure Mattress System with Low Air Loss
incorporates the features that clinicians demand for their patients in a portable
system. The mattress utilizes 16 independent 8" deep air cells to provide pressure
redistribution for the prevention and treatment of Stages I-IV pressure ulcers. User
friendly controls and ease of setup make Apollo - 3 PortTM ideal for institutional use
and the home-bound patient. The mattress is designed to fit all standard hospital beds.
Apollo 3-PortTM support patient weights up to 350 lbs. Apollo 3-PortTM meets
California Technical Bulletin #117 for fire retardancy. An optional fire barrier is
available to meet the most stringent fire safety requirements when requested.
Page 15
169/16/2010 9/16/2010 11:20 AM16
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Cover:
Vyvex-III® multi-directional stretch fabric
transfers moisture away from the patient’s skin. The cover is low
shear, washable, anti-microbial, fluid resistant and fire retardant.
Cover is loose fitting and will conform to the patient.
Bladders:
Ventilated bladders include 40 air holes in sacral and torso areas to
help minimize skin maceration by reducing excess moisture under
patient. Air cells are constructed of (TPU) thermal polyurethane,
laminated to a medical grade nylon. Dual bladder design prevents
patients from bottoming out, while sitting up and will maintain air
during power outages.
Page 16
17
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Pump Control Unit Features
•Unique 3-Port design provides continuous air flow to the 3” static air base of mattress.
•Alternating mode offers the benefit of alternating pressure therapy and reactive
hyperemia. This helps to redistribute pressure well below 32mmHg.
•Control dial adjusts mattress from soft to firm for patient comfort.
•Normal Pressure Alert indicates that system is operating correctly.
•Low Pressure Alert indicates that output needs to be increased for heavier patients or
accidental disconnection of hoses.
Adjustable Pump comes with adjustable hanger brackets to secure unit to bed. fits all
makes of hospital beds.
The optional blower pump Optional pump is available
to quickly inflate and deflate mattress through CPR
valve in under 4 minutes.
Apollo 3 Port® - Model 4600 Mattress and Apollo 3 Port® - Model 4601 Pump only
Pump Dimensions: 10.75L" x 7.5W" x 3.5H"
Dimensions: 35” x 80” x 8” Weight:6.8 lbs.
Cover: Vyvex-III® Electrical:120V 60 Hz
Weight Capacity: Support 350 lbs. Cycle Time:10 Minutes
Air Cells: Air Flow:7.5 Liters per minute
16 - 8 " sacs Current Usage: less than 100 micro amps
13 Alternating cells Ground Resistance:0.1 ohms maximum
10 Ventilated cells with 40 air holes Power Cord:12 ft. cord
3 Static cells in head section Construction: ABS fire retardant UL 94V-0
Warranty: Warranty: Pumps:1 Year limited
Mattress:1 year limited
Cover: 6 months limited
Page 17
189/16/2010 9/16/2010 11:20 AM18
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Power Pro Elite® Mattress System- Model 9500
Alternating Pressure Mattress System with True Low Air Loss
The Power-Pro® Elite Mattress System combines two clinically effective therapies:
True Low Air Loss and Alternating Pressure, in a portable system. The mattress utilizes
18 independent 9" deep air cells to provide proper pressure redistribution for the
prevention and treatment of Stages I-IV pressure ulcers. User friendly controls and
ease of set up make this system ideal for institutional use and the home bound
patient. The mattress is designed to fit all standard hospital beds. The Power-Pro®
Elite True Low Air Loss Alternating Pressure Mattress System supports patient’s
weighing up to 1000 pounds. Audible alarm system alerts caregiver of power outages.
Power Pro® Elite meets California Technical Bulletin #117 for fire retardancy. An
optional fire barrier is available to meet the most stringent fire safety requirements
when requested.
Bladders:
Ventilated low air loss cells have air holes
throughout the mattress to help minimize skin
maceration by reducing excess moisture under
patient. Air cells are constructed of thermal
polyurethane material. Dual bladder design
prevents patients from bottoming out, while
sitting up and will maintain air during power
outages.
Cover:
Vyvex - III® - Urethane coated, multi-stretch, moisture resistant / vapor permeable,
low shear, quilted cover, transfers moisture away from the patient’s skin. The cover
is washable, anti-microbial, fluid-resistant and fire-retardant.
Page 18
19
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Hose connections are color coded and feature
a transport locking device that insures
mattress remains inflated for patient transport.
CPR Valve quickly deflates mattress system for
medical emergencies. A simple twist, releases
the air immediately.
Blower Pump
The blower pump is controlled by a micro-
processor which allows the caregiver total
control of comfort and chosen therapy. Cycle
time ranges from 5 to 95 minutes. The blower
pump inflates the mattress within minutes,
reducing the waiting time for therapeutic
treatment to begin.
Power-Pro Elite® - Model 9500 Mattress Power-Pro Elite® - Model 9501 Pump only
and Pump Dimensions: 17L" x 7W" x 10.5H"
Dimensions: 36” x 80” x 9” Weight: 12 lbs.
Cover: Vyvex-III® Electrical: 120V 60 Hz
Weight Capacity: Support 1000 lbs. Cycle Time: 5—95 Minutes
Air Cells: Air Flow: 60—250 Liters per minute
16 - 9" deep cells Current Usage: 5A
13 Alternating cells Ground Resistance: 0.1 ohms maximum
Ventilated bladders with air holes Power Cord:12 ft. cord with hospital grade
throughout mattress plug
Warranty: Warranty: Pumps:1 Year limited
Mattress:1 year limited
Cover: 6 months limited
Page 19
209/16/2010 9/16/2010 11:20 AM20
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Power Turn Elite ™ Mattress System- Model 9800
Lateral Rotation Therapy with True Low Air Loss
The Power-Turn® Elite Mattress System combines two clinically effective therapies:
Lateral Rotation and True Low Air Loss in a portable system. The mattress utilizes 18
independent 9" deep air cells to provide proper pressure redistribution for the
prevention and treatment of Stages I-IV pressure ulcers. Lateral Rotation Therapy
reduces the risk of pulmonary complications for patients who are immobile. A Full,
Left or Right Turn mode is offered with a either a 25º Small Turn or a 40º Big Turn. The
mattress replacement is designed to fit all standard hospital beds and includes a high
density foam base, head bolster and abduction wedge for additional patient safety.
The Power-Turn® Elite Lateral Rotation Mattress System supports patients weighing
from 650 lbs. to 1000 lbs. The Power-Turn® Elite meets California Technical Bulletin
#117 for fire retardancy. An optional fire barrier is available to meet the most
stringent fire safety requirements when requested for foam base.
Bladders:
Ventilated low air loss cells have air holes throughout mattress to help minimize skin
maceration by reducing excess moisture under the patient. Air cells are constructed of
thermal polyurethane material. This combination insures strength, durability and
patient comfort.
Cover:
Vyvex - III® - Urethane coated, multi-stretch, moisture-resistant / vapor-permeable,
low shear, quilted cover, transfers moisture away the from patient’s skin. The cover is
washable, anti-microbial, fluid-resistant and fire-retardant.
Page 20
21
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Hose connections are color coded for easy
connection.
CPR Valve quickly deflates mattress system for medical
emergencies. A simple twist, releases the air
immediately. This multi-purpose CPR Valve can be used
to inflate or deflate the mattress with our optional
blower pump.
Blower Pump:
The blower pump is controlled by a micro-
processor which allows the caregiver total control
of comfort and chosen therapy. Cycle time ranges
from 5 to 95 minutes. The blower pump inflates
the mattress within minutes. This reduces the
waiting time for therapeutic treatment to begin.
Head Rest and Leg Abductor:
Head rest and leg abductor wedge provide support during the turning cycles. Head
support is constructed from Viscotec®, a visco elastic foam, the leg abductor is
constructed from VPF®, variable pressure foam. Both are covered with Vyvex-III®.
Power-Turn Elite® - Model 9800 Mattress and Power-Pro Elite® - Model 9801 Pump
Pump only
Dimensions: 35” x 80” x 9” Dimensions: 17L" x 7W" x 10.5H"
Cover: Vyvex-III® Weight:12 lbs.
Weight Capacity: Support 1000 lbs. Electrical:120V 60 Hz
Air Cells:
Cycle Time:5—95 Minutes
18 - 9"deep cells
Air Flow:60—250 Liters per minute
Ventilated bladders with air holes throughout
mattress
Current Usage: 5A
10” patented side rail bolsters are built into Ground Resistance:0.1 ohms maximum
mattress perimeter which supports the patient Power Cord:12 ft. cord with hospital
and ensures safety during rotation cycles grade plug
Custom Sizes Available: Warranty: Pumps:1 Year limited
Model 9800 36” x 80” x 9”
Model 9842 42” x 80” x 9”
Model 9848 48” x 80” x 9”
Warranty:
Mattress: 18 month limited
Cover: 6 months limited
Page 21
229/16/2010 9/16/2010 11:20 AM22
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Rapid-Air® Mattress System- Model 4300 & Rapid-Air® Plus Model 4300
The Rapid-Air® Alternating Air Floatation Mattress System with Low Air Loss
The Rapid-Air® and Rapid-Air Plus® Alternating Air Floatation Mattress Systems with
Gentle Low Air Loss incorporate the features that clinicians demand for their patients
in a portable system. The mattress utilizes 18 independent 5.5" deep air cells to
reduce interface pressure for the prevention and treatment of Stages I-IV pressure
sore ulcers. User friendly controls and ease of setup make these systems ideal for
institutional use and the homebound patient. The mattress is designed to fit all
standard hospital beds.
Bladders:
Ventilated bladders include 20 lasered air holes in sacral area to help reduce skin
maceration by reducing excess moisture under patient. Air cells are constructed of
laminated medical grade nylon and TPU, thermal polyurethane fabrics. This
combination insures strength, durability and patient comfort.
The model 4300P Rapid-Air Plus® features a VPF® 2.5” pressure redistribution foam
base protects the patient from bottoming out during power outages. The foam is
covered in a medical grade nylon which is anti-microbial and fire retardant.
Cover:
Vyvex-I® nylon cover wicks moisture away from patients skin. The cover is low shear,
anti-microbial, fluid resistant, fire retardant and washable. Cover is loose fitting and
will conform to the patient.
Page 22
23
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
AIR MATTRESSES
Pump:
Alternating mode offers the therapeutic
benefit of alternating therapy and reactive
hyperemia. This helps to reduce interface
pressure well below 32mmHg.
Control dial adjusts mattress from soft to firm
for patient comfort.
Normal Pressure Alert indicates that system is
operating correctly.
Low Pressure Alert indicates that output
needs to be increased for heavier patients or
accidental disconnection of hoses.
Optional blower pump is available to quickly
inflate and deflate mattress through CPR valve
in under 4 minutes
Prapid-Air® - Model 4300 Mattress Only Rapid-Air® - Model 4301 Pump only
Dimensions: 35” x 80” x 5.5” Dimensions: 10L" x 5W" x 4.5H"
Cover: Vyvex-1® Weight:6.2 lbs.
Air Cells: Electrical:120V 60 Hz
18 - 5.5" sacs Cycle Time:10 Minutes
15 Alternating cells Air Flow:7.5 Liters per minute
10 Ventilated cells with 20 lasered air holes Current Usage: less than 100 micro amps
Ground Resistance:0.1 ohms maximum
Prapid-Air® Plus - Model 4300P Mattress Power Cord:12 ft. cord
Only Warranty: Pumps:1 Year limited
Dimensions: 35” x 80” x 8” (Including Foam
Base) Custom Sizes Available:
Cover: Vyvex-1® Model 4300 35” x 80” x 5.5” Mattress &
Air Cells: Pump
18 - 5.5" sacs Model 4300P 35” x 80” x 8” Mattress with
15 Alternating cells Foam & Pump Control
10 Ventilated cells with 20 lasered air holes Model 4300PM 25” x 45” x 3.5” Pediatric
3 Static cells in head section Mattress
Warranty:
Mattress: 1 year limited
Cover: 6 months limited
Page 23
249/16/2010 9/16/2010 11:20 AM24
AIR MATTRESSES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Vortex™ Mattress System
Pressure Distribution Mattress Systems
Advanced mattress system for the treatment of pressure ulcers. The Vortex has been
designed to create both a pressure reducing and pressure equalizing environment
while maximizing the patients comfort. Once inflated, the multi-zone construction
conforms to the patients body and self-adjusts to meet their needs.
• 108 5” thermoformed air cells aligned in a matrix configuration that provides
continuous force equalization
• Product comes in full replacement mattress and mattress overlay configurations and
is divided into three independent sections that can be custom adjusted for each
patient’s needs
• Supports patient weights up to 350 lbs.
• Heavy duty harness straps hold overlay securely to underlying mattress
• Easily dismantled and transported
Quick Release CPR Valve
5" Thermoformed Air Cells
Dimensions:
Model BCHTM860 16” x 16”
Zippered Top Cover: Vyvex-III®
Bottom Cover: Non-skid tri-laminate vinyl
Weight Capacity: Supports up to 350 lbs.
Custom Sizes Available:
Durable Welded Seams Model VTX-800 36” x 80”
Model VTX-842 42” x 80”
Model VTX-848 48” x 80”
Model VTX-854 54” x 80”
Model VTX-860 60” x 80”
Warranty:
Cushion: 18 Months Limited
Page 24
25
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
MATTRESS OVERLAYS
Stat Air® Mattress Overlay - Model 5300
Wound care professionals recognize static air as an acceptable therapy in the fight
against pressure sores. The Stat-Air® mattress is constructed using a pliable medical
grade vinyl, that contours to the patient's body. Heat build up and moisture are
greatly reduced, due to the air holes throughout the mattress. Once filled, Stat-Air®
does not require an electric pump to maintain inflation. Adjustable anchor straps
secure Stat-Air® to an existing mattress, for patient safety. The mattress can be filled
using a manual or electric inflator. Rapid deflation during medical emergencies is
achieved through the quick release valve. The mattress is anti-microbial and fire
retardant.
Dimensions:
Model 5300 36”W x 72”L x 3.5”H
Optional Manual Inflator Model 5301
Optional Electric Inflator Model 9623
Page 25
269/16/2010 9/16/2010 11:20 AM26
MATTRESS OVERLAYS CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Stat H20® Mattress Overlay - Model 5500
The Stat-H2O® water mattress helps to reduce interface pressure, while providing a
cooler, more comfortable sleeping surface. The internal baffle design balances the
patient in the center of the mattress, while eliminating the traditional water mattress
"rocking" effect. A thermometer is included for monitoring of the water temperature.
The medical grade vinyl is pliable, anti-microbial, & incorporates an easy-to-fill
adapter valve. Stat-H2O® easily converts to STAT-GEL®, a full gel mattress overlay with
the addition of our special gel powder.
Dimensions:
Model 5500 32”W x 72”L x 3.5”H
Fill Hose Model 5501
Gel Pack Model 5701
Page 26
27
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
MATTRESS OVERLAYS
Air Pro® Series Mattress Overlay System
Alternating Pressure Pad & Pump Overlay Mattress Systems
The Air-Pro® Plus & Elite Alternating Pump and Overlay Mattress Systems include a
foldaway bed hanger bracket. This feature keeps the pump off the floor and reduces
any accidental damage. Our easy access filter located on the bottom of the pump
reduces any chance of dust particles from entering the pump compressor motor. We
include a heavy duty, deluxe bubble style pad with head and foot tuck under flaps. The
adjustability of the Elite allows this system to be used for heavier patients.
Air-Pro® meets California Technical Bulletin #117 for fire retardancy.
Air-Pro® Series - Overlay Mattress Pad
Material: Medical grade PVC with Anti-microbial, fire-retardant treatments.
Design: Bubble Style with more touch
points for effective weight distribution.
Model 4400 Air Pro® Elite Shown
MODEL 4800 Air Pro Pad Solo®
Dimensions:36" x 79" x 2.5"
All Kits contain pump, mattress
End Flaps :No
pad and hose.
Ventilated: No
Pump:4201/4401
Heavy Duty: No
Patient Weight :250 Air-Pro® Plus
Pump Model 4201
MODEL 4810 Air Pro Pad Deluxe®
Dimensions:36" x 79" x 2.5"
End Flaps :Yes
Ventilated: No Air-Pro® Elite
Pump:4201/4401 Pump Model 4401
Heavy Duty: Yes
Patient Weight :250
Page 27
289/16/2010 9/16/2010 11:20 AM28
MATTRESS OVERLAYS CA LL T O O RD ER 7 0 4 - 90 0- 02 81
MODEL 4820 Air Pro Pad Laser® MODEL 4830 Air Pro Pad Multi®
Dimensions:36" x 79" x 2.5" Dimensions:36" x 79" x 3.75"
End Flaps :Yes End Flaps :Yes
Ventilated:36 Lasered holes Ventilated:36 Lasered holes
Pump:4401S Pump:4401S
Heavy Duty: Yes Heavy Duty: Yes
Patient Weight :250 Patient Weight :350
MODEL 4201 Air-Pro Plus ® - Pump only *** MODEL 4401 Air-Pro Elite ® - Pump only ***
Dimensions:9L" x 4W" x 3.5H" Dimensions:10L" x 5W" x 4H"
Weight:4 lbs. Weight:5 lbs.
Electrical:110V 60 Hz Electrical:110V 60 Hz
Listings: UL® 544 Medical Equipment Listings: UL® 544 Medical Equipment
Cycle Time:10 Minutes Cycle Time:10 Minutes
Air Flow:5.6 Liters per minute Air Flow:6.8 Liters per minute
Power Cord:12 ft. cord Power Cord:12 ft. cord
MODEL 4401S Air-Pro Elite ® - Pump only For Models 4820 & 4830 ***
Dimensions:10L" x 5W" x 4H"
Weight:5 lbs.
Electrical:110V 60 Hz
Listings: UL® 544 Medical Equipment
Cycle Time:10 Minutes
Air Flow:8.5 Liters per minute
Power Cord:12 ft. cord
*** PUMPS: All models available in 220 - 240V: 50 - 60 Hz
ORDERING INFORMATION
Model 4200 System - 4201 Air Pro Plus pump with 4810 Pad
Model 4201Air Pro Plus Pump
Model 4400System - 4401 Air Pro Elite pump with 4810 Pad
Model 4401Air Pro Elite Pump
Model 4401S Pump only for Models 4820 & 4830
Model 4800Air Pro Pad Solo
WARRANTY
Model 4810 Air Pro Pad Deluxe
Pumps:1 Year limited
Model 4820Air Pro Pad Laser
Mattress:6 Months limited
Model 4830 Air Pro Pad Multi
Page 28
29
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
MATTRESS OVERLAYS
Gel-Pro Overlay Model 6103
It offers maximum protection to guard against the incidence of pressure sores. Our
viscous gel, migrates through sectioned bladders to relieve pressure around bony
prominences. Sculptured low profile, resilient foam surrounds the gel to provide the
proper combination for optimum pressure relief. A high density foam base supports
the entire mattress for maximum weight distribution & durability. The top cover is a
soft non-shear nylon material that helps to reduce heat & moisture build-up. The
bottom cover is a durable medical grade vinyl. Both materials are fluid & stain
resistant, anti-microbial, and fire retardant.
Weight Capacity: 250 Lbs.
Dimensions:
Model 6103 36” W x 80” L x 3” H
Model 6103-42BAR 42” W x 80” L x 4” H
Model 6103-48BAR 48” W x 80” L x 4” H
Model 6103F 54" W x 76 " L x 3 " H (Full Bed)
Model 6103Q60" W x 80 " L x 3 " H (Queen Bed)
Custom and Bariatric sizes are available
Surface coverage is 85% Gel
Page 29
309/16/2010 9/16/2010 11:20 AM30
MATTRESS OVERLAYS CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Stat Gel ® Mattress Overlay - Model 5700
The STAT-GEL® special gel powder mixes with water to create our pressure relieving
highly viscous clear gel. The STAT-GEL® overlay mattress is created from a medical
grade vinyl that is pliable, anti-microbial, and incorporates an easy-to-fill adapter
valve. Stat-H2O® easily converts to STAT-GEL®.
Dimensions:
Model 5700 32”W x 72”L x 3.5”H
Gel Pro ® Mattress Overlay Sleep System 5- Model 6305
Ideal for the Nursing Home & Homecare Markets. The 3 section, 5.5” mattress utilizes
a high density, high compression foam base designed to extend the life of the mat-
tress and maximize its clinical benefit. The mattress is constructed using the same ma-
terials as the Gel-Pro® Overlay but with heavy duty institutional use in mind. The zip-
pered cover allows for sections to be removed for easy portability and storage. Both
materials are fluid and stain resistant, anti-microbial, & fire-retardant. Weight Capac-
ity: 250 Lbs.
Dimensions:
Model 6305 35” W x 80” L x 5” H (3 section)
Model 6305F 54” W x 76” L x 5” H (3 section)
Model 6305Q 60” W x 80” L x 5” H (3 section)
Page 30
31
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
REPLACEMENT
Replacement Stretcher Mattresses
All replacement mattresses are designed to meet the heavy-duty requirements neces-
sary for institutional use. The foam core is a high density polyurethane foam that ad-
heres to California technical bulletin #117 for fire retardancy. A selection of foams and
materials are available to meet more stringent fire standards such as California techni-
cal bulletin #121, 129, 603 and 1X-11 Boston fire code. Your choice of square,
rounded or cut corners are available.
The mattresses are manufactured in a variety of cover fabrics: the conductive material
is a UL registered fabric approved by the underwriters laboratories. The non-
conductive is a durable bonded vinyl leatherette. Waterfall flaps cover zippers for
added protection against infiltration of fluids. Both materials are anti-microbial, non-
allergenic and adhere to California technical bulletin #117 for fire retardancy.
We offer pressure redistribution mattresses in all styles with and without gel.
Optional features include: Velcro or fabric hinges, IV or GU cut-outs, Velcro strips and
Velcro retaining straps
We manufacture all mattresses
to fit the following:
Hill-Rom® - Hausted® -
Midmark® - Stryker® & more!
CORNER STYLES
ORDERING INFORMATION
Cut-Off
Model 5001 1 Section Stretcher/OR Mattress 1"
Model 5002 1 Section Stretcher/OR Mattress 2"
Model 5003 1 Section Stretcher/OR Mattress 3"
Model 5004 1 Section Stretcher/OR Mattress 4"
Model 5021 2 Section Stretcher/OR Mattress 1" Round
Model 5022 2 Section Stretcher/OR Mattress 2"
Model 5023 2 Section Stretcher/OR Mattress 3" Square
Model 5024 2 Section Stretcher/OR Mattress 4"
Model 5031 3 Section Stretcher/OR Mattress 1"
Model 5032 3 Section Stretcher/OR Mattress 2"
Model 5033 3 Section Stretcher/OR Mattress 3"
Model 5034 3 Section Stretcher/OR Mattress 4"
Page 31
329/16/2010 9/16/2010 11:20 AM32
ACCESSORIES CA LL T O O RD ER 7 0 4 - 90 0- 02 81
Side Rail & Crib Bumpers
Patients are protected from accidental injury due to banging or slipping through a bed
rail. The inner core is a fire-retardant high-compression polyurethane that is covered
with an anti-microbial, fire-retardant vinyl cover, meeting California Technical Bulletin
#117. Bumpers are sold in sets and attach to rail with Velcro closures.
ORDERING INFORMATION
Model BCM 211 Fire Retardant Bumper 11 x 70 x 1
Model BCM 211-2 Fire Retardant Bumper 11 x 70 x 2
Model BCM 215 Fire Retardant Bumper 15 x 60 x 1
Model BCM 215-2 Fire Retardant Bumper 15 x 60 x 2
Model BCM 216 Fire Retardant Bumper 11 x 30 x 2 for Hill Rom Style Beds
Model BCM 217 Fire Retardant Crib Bumper 26 x 50 x 8 x 2 (with ties)
Model BCM 218 Fire Retardant Crib Bumpers 32 x 68 x 8 x 2 (with ties)
Hospital Patient Proof Pillow
All pillows are manufactured using a “hypo-allergenic” high lofted fire-retardant fiber
fill. We offer four different pillow tickings: vinyl, breathable vinyl, navy nylon and poly/
cotton. The nylon and vinyl covers are anti-microbial, and meet California Technical
Bulletin #117 for fire-retardancy.
ORDERING INFORMATION
Model 2026V 1 ea. Fiberfill 20 x 24 Fire Retardant Pillow with Anti-Microbial
Vinyl Cover
Model 2026B 1 ea. Fiberfill 20 x 24 Fire Retardant Pillow w Breathable anti-
Microbial Vinyl Cover
Model 2026N 1 ea. Fiberfill 20 x 24 Fire Retardant Pillow with Anti-Microbial
Nylon Cover
Page 32
33
W W W . EM P I R EM ED I C A L S OL U TI ON S . C OM
Page 33
EMPIRE MEDICAL SOLUTIONS, LLC
Charlotte, North Carolina
Phone: 704-900-0281
Fax: 704-625-7452
E-mail: info@empiremedicalsolutions.com
www.empiremedicalsolutions.com
