; A
Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

A

VIEWS: 7 PAGES: 28

  • pg 1
									     PART – II

    FINANCIAL BID
       FOR THE

 PROPOSED INTERIOR
  FURNISHING WORK
         AT

JANTA COLONY BRANCH


  ALLAHABAD BANK
    ZONAL OFFICE
       JAIPUR.
                              COST ABSTRACT
       S. No.               ITEM                ESTIMATED COST (Rs.)

           1.   WOODEN FURNISHING WORK

           2.   ELECTRICAL & TELEPHONE WORK

           3.   A.C. WORK

           4.   DATA CABLING WORK

                                    TOTAL Rs.




Date: -
Place: -
                                                PART-I
                                   WOODEN FURNISHING WORK

                               SPECIFICATION OF THE MATERIALS

1.    Commercial board                     :   19 mm thick , Green/Kit/Century/Uro/Duro

2.    Commercial Ply                       :   6mm , 8mm thick , Green/Kit/Century/ Uro/Duro

3.    Laminates                            :   1.0 mm thick, Formica /Green lam/Uro/Duro

4.    Glass                                :   Modi Float / Aashi Float

5.    Enamel Paint                         :   Asian / Nerolac

6.    Locks                                :   Godrej 6 levers for doors ,

                                               2 levers for shutters , Cylindrical.

7.    Door Closers                         :   ISI Marked , Hydrolic.

8.    Door fittings & fixtures (Aluminium) :   Armour/ Agrent/ Jyoti

9.    Hardware                             :   Hinges , door stoppers , handles etc.

                                               Shalimar / Reliance / Everlite.

10.   Hardware - Cacthers                  :   Magnetic.

11.   Hardware - Channels                  :   Flyrail/EBCO/Earl Bihari

12.   Beading                              :   MP/Burma Teak wood , Half round /

                                               Quarter round.

13.   Foam                                 :   M. M. Foam / Arvind.

14.   Adhesive                             :   Fevicol / Araldite / Kitcol / Vamicol.

15.   Teak wood                            :   MP / Burma

16.   Pine / Chir wood                     :   Good Quality
Specifications for Site preparation / Renovation / Furnishing of CBS Branches
SL.   ITEM DESCRIPTION                                               QTY.      UNIT        RATE        AMT.
NO.                                                                                         (Rs.)      (Rs.)
1.    Providing and fixing in position gypboard false ceiling in
      tow levels as per design, 12 mm thick gypsum board,
      including necessary frame work of galvanized steel
      members, complete with recommended fillers, paper tapes
      and applying two coats of acrylic emulsion paint of
      approved shade and make over two coats of primer strictly
      as per manufacturers specifications.
      In case of stone slabs roof the M. S. raw plugs to be fixed
      between the joint of two stone slabs. The raw plugs shall
      be firmly fixed between the joint with cement mortar and
      small stone pieces. No drilling/screwing allowed in the
      existing stone slabs roof.
      Rates to include cost of making openings for ceiling
      mounted electrical/air-conditioning accessories as per
      instructions. (Item to be restricted to) Banking Hall,
      Manager’s Cabin & Server Room only)
      (The contractor is to submit manufacturers‟ test report
      along with the measurements.)                                  1685.00     Sq. ft

2.    Providing and fixing polished teak Wood moulding (out
      of 50 X 50 mm sections) at junctions of false ceiling, walls
      and at other locations including NC lacquer finish.
                                                                      0.00      Rft.

3.    Wall paneling/ column encasing (upto false ceiling
      height) works as per drawing and conforming to the
      following specifications (quantity/location should be
      restricted only to the central pillars in Banking Hall or
      any prime location)
      Basic frame work:
      Well seasoned hard wood sections, treated with twocoats
      of wood preservatives, minimum 50 X 25 mm, at suitable
      horizontal / vertical spacings not exceeding 600 mm c/c.
      Skin membrane :
      6mm thick BWR grade plywood with grooves formed as
      desired as per drawing/instructions.


                                                                                          Page Total
SL.   ITEM DESCRIPTION                                             QTY.      UNIT      RATE      AMT.
NO.                                                                                     (Rs.)    (Rs.)

      Finishing
      1 mm thick laminate sheet of same or combination shades
      as per instructions
      Skirting
      100 mm high X 12 mm thick polished 2 nd class teak wood
      skirting with NC lacquer finish.
      Quoted rates shall include all necessary materials,
      accessories and labour and also allow provisions for
      electrical/telephone/computer wiring conduits and switch
      boxes, etc complete with necessary jacking/thickening of
      panels to accommodate conduits/ switch boxes etc.
      (Materials for wiring conduits and switch boxes shall be
      separately paid for.)
                                                                   650.00    Sq. ft

4.    Specifications same as above, but 12 mm thick approved
      quality soft board cladded with fabric of approved shade
      and quality in place of 1.00 mm thick laminated sheet
      including double layer 4 mm thick phenol formaldehyde
      bonded      plyboard     (location/quantity     should be
      specified/restricted to most suitable location only)            0.00   Sq ft

5.    Supplying and erecting full height partitions (upto false
      ceiling height) as per drawing and conforming to the
      following specifications:
      Well seasoned Malayasian hard wood sections, treated
      with two coats of wood preservatives, 60 mm wide X 40
      mm (minimum) at maximum 600mm horizontal or vertical
      spacings as per site conditions. Vertical members shall be
      suitably anchored at ceiling level to ensure rigidity.

      Basic frame work:
      Well seasoned Malayasian hard wood sections, treated
      with two coats of wood preservatives, 60 mm wide X 40
      mm (minimum) at maximum 600mm horizontal or vertical
      spacings as per site conditions. Vertical members shall be
      suitably anchored at ceiling level to ensure rigidity.
      Skin membrane :
      6mm thick BWR grade plywood on each face with grooves
      formed at the top layer as per drawing/instructions.


                                                                                Page Total 113750.00




SL.   ITEM DESCRIPTION                                             QTY.      UNIT      RATE      AMT.
NO.                                                                                 (Rs.)        (Rs.)
      Finishing
      1.0 mm thick laminate sheet of same or combination
      shades as per instructions
      Skirting
      100 mm high X 12 mm thick polished teak wood skirting
      with NC lacquer finish.
      Quoted rates shall include all necessary materials,
      accessories and labour and also allow provisions for
      electrical/telephone/computer wiring conduits and switch
      boxes, etc. (Materials for wiring conduits and switch boxes
      shall be separately paid for.)
                                                                    0.00   Sq. ft

6.    Supplying and erecting Cash Cabin full height partly
      glazed partitions (upto 7‟-0” height) as per drawing and
      conforming to the following specifications:
      Basic frame work:
      Well seasoned Malayasian hard wood sections, treated
      with two coats of wood preservatives, 60 mm wide X 40
      mm (minimum) at maximum 600mm horizontal or vertical
      spacings as per site conditions. Vertical members shall be
      suitably anchored at ceiling level to ensure rigidity.
      Exposed frame member in the glazed portions shall have
      wider spacings ( approx. 1800 mm clear) as per
      instructions. Exposed members shall be finished with 1.00
      mm thick laminate sheet of same or combination shades.
      Over 6 mm thick BWR grade plywood facing including
      4X6 mm grooves at locations as per instruction.
      Skin membrane :
      (Solid portion upto 900 mm from floor level and from
      2100mm to false ceiling with 6 mm thick BWR grade
      plywood on each face with grooves formed as per
      drawings / instructions.
      Finishing
      1.0 mm thick laminate sheet of same or combination
      shades as per instructions
      Skirting
      100 mm high X 12 mm thick polished teak wood skirting
      on both faces, with NC lacquer in mat finish.



                                                                               Page Total 0.00
SL.   ITEM DESCRIPTION                                              QTY.      UNIT        RATE        AMT.
NO.                                                                                        (Rs.)      (Rs.)

      Glazing
      6 mm thick clear float glass fixed with continuous steam
      beech/teak wood glazing beads of approved shape
      (finished 35 X 25 mm) all round, polished and coated with
      NC lacquer finish. The rate should also include cost for
      decorative etching on one side & cutting of the glass.
      Quoted rates shall include all necessary materials,
      accessories and labour and also allow provisions for
      electrical/telephone/computer wiring conduits and switch
      boxes, etc. (Materials for wiring conduits and switch boxes
      shall be separately paid for.)
                                                                     125.00     Sq. ft

7.    Providing and fixing in position readymade anodized
      aluminum grill of approved design and quality fixed with
      continuous steam beech/ teak wood beads of approved
      shape (finished 35 X 25 mm) all round polished and coated
      with NC lacquer finish. (In cash cabins)
                                                                      50.00     Sq. ft

8.    Supplying and erecting low height partitions (upto max
      1372mm high) with glass fixing as per drawing and
      conforming to the following specifications:

      Basic frame work:
      Well seasoned Malayasian hard wood sections, treated
      with two coats of wood preservatives, 60 mm wide X 40
      mm (minimum) at maximum 600mm horizontal or vertical
      spacings as per site conditions.

      Skin membrane :
      6mm thick BWR grade plywood on each face with grooves
      formed as per drawing/instructions.

      Finishing
      1.0 mm thick laminate sheet of same or combination
      shades as per instructions




                                                                                         Page Total
SL.   ITEM DESCRIPTION                                               QTY.      UNIT      RATE        AMT.
NO.                                                                                       (Rs.)      (Rs.)
      Edge moulds:
      All free top/end surfaces shall have polished steam
      beech/teak wood moulds of approved shape (from 80 X 25
      mm sections) with NC lacquer in mat finish.

      Skirting
      100 mm high X 12 mm thick polished teak wood skirting
      with NC lacquer finish.
      Quoted rates shall include all necessary materials,
      accessories and labour and also allow provisions for
      electrical/telephone/computer wiring conduits and switch
      boxes, etc. (Materials for wiring conduits and switch boxes
      shall be separately paid for.)
                                                                      230.00   Sq. ft

9.    Providing and erection in position Cash Counters /Cash
      work Station of approx. As per the drawing inclusive of
      1100 mm high, 350 mm wide customer writing top
      finished with mirror polished 18 mm thick granite slab, jet
      black in shade including moulding piece, fixed with
      chemical adhesive.

      The cash counters shall be made of 19 mm thick BWR
      grade block board finished with 1.00 mm thick laminate
      sheet including inner faces. Free edges shall have teak
      wood mouldings of half-round profile as per drawings and
      instructions, Inner face of modesty panel and free sides are
      to be cladded with 16 gauge M. S. sheet, painted with two
      coats of synthetic enamel paint of approved shade and
      brand over a coat of approved steel primer.
      Each cash work station shall comprise of the following ;
      Drawer unit made with 12 mm thick ply on 3 sides & on
      bottom the front will be in 19 mm th block board




                                                                                        Page Total
SL.   ITEM DESCRIPTION                                                QTY.     UNIT      RATE        AMT.
NO.                                                                                       (Rs.)      (Rs.)
      Cash drawers having slots for keeping cash of different
      denominations with approved telescopic channels for
      drawer-sides, automatic locks (keys in duplicate) and other
      necessary hardware and accessories including satin finish
      S. S. handles of approved quality :
      Readymade keyboard drawer of engineering plastic (KD
      575 PMT/INNOFITT SYSTEMS OR Equivalent approved
      make) and all necessary accessories, suitably suspended
      below table top.
      The front of the cash counters shall have 12 mm thick clear
      float glass in two pieces at sides with polished teak wood
      glazing beads as per instructions and drawings.
                                                                        6.00   Rft.

10    Providing and fixing in position notice board as per
      drawing and conforming to the following specifications :
      Basic frame work:
      Well seasoned hard wood sections, treated with two coats
      of wood preservatives, minimum 50 X 25 mm, at suitable
      horizontal / vertical spacings not exceeding 600 mm c/c.
      Skin membrane :
      4mm thick BWR grade plywood over which 12 mm thick
      approved quality soft board cladded with fabric of
      approved shade and quality.
      Edge moulding:
      All free edges shall have polished 2 nd class teak wood
      moulds of approved shape (finished 50 X 25 mm sections)
      with sprit polish in mat finish.                                 25.00   Sq ft.

11    Supplying and fixing in position well seasoned malayasian
      sal wood scantling to door frame as directed and specified.
      Exposed surfaces are to be painted in approved colour with
      synthetic enamel paint of approved shade and quality.
                                                                       20.00   R. ft.

12.   Supplying and fixing in position overall 37 mm thick solid
      core approved flush door shutter finished with 1.0 mm
      thick laminate sheet of approved shade and quality on both
      sides of the door shutter including cost of hardware fittings
      e.g. mortice locks, brass hinges, door handles, door closer
      etc. of approved make and quality.
                                                                       21.00   Sq ft.


                                                                                        Page Total



SL.   ITEM DESCRIPTION                                                QTY.     UNIT      RATE        AMT.
NO.                                                                                        (Rs.)      (Rs.)

13.   Supplying and fixing in position 37 mm thick door
      shutter made of 15 mm thick well seasoned second class
      teak wood planks with double layer 6mm thick both ways
      BWR grade plywood finished with 1.00 mm thick laminate
      sheet (without joints) of approved quality on both sides of
      the door shutter upto 900 mm from floor level. The upper
      portion of the shutter is to be provided with 6 mm thick
      clear float glass fixed with polished steam beech/ teak
      wood glazing beads of approved design, complete as per
      drawing. Rate to include cost of hardware fittings e. g.
      mortice locks/ night latch, brass hinges, door handles, door
      closure etc. of approved make and quality. The exposed
      timber surfaces are to be polished in approved colour and
      finishing the same with NC lacquer in mat satin finish.        21.00   Sq ft.

14.   FLAP DOOR
      2½” X2½” teak wood door frame polished.
      2½” X 1½” Chir/ Pine wood to be used for the
      shutter frame. 6mm commercial ply on both faces covered
      with 1.5 thick laminate in two shades. Complete hardware
      like flap door hinges, Latch lock etc. to be provided in
      brass of good quality also to be provided (ISI make or as
      per the specification) Details as per the drawing.
      All exposed wooden frame/ wooden members to be of teak
      wood duly polished in approved shade.
                                                                     15.00       Sq ft

15.   Supplying and fixing in position well seasoned 1 st class
      teak wood scantling to entrance door frame as directed and
      specified. Exposed surfaces are to be polished in approved
      colour and finished with NC lacquer in mat satin finish.
                                                                      0.00        Rft.

16.   CENTER TABLE
      Providing & fixing two tiered, made of
      commercial board laminated center table of
      Size = 4‟-0” X 2‟-0” X 1‟-6” .
      Complete in all respect.                                          2 Nos.




                                                                                         Page Total
SL.   ITEM DESCRIPTION                                                 QTY.    UNIT      RATE        AMT.
NO.                                                                                       (Rs.)      (Rs.)

17.   A) Providing and fixing twin-stile door made of 50 mm
      thick well seasoned teak wood of special design for top and
      bottom stiles, fixed portion with 8 mm clear float glass and
      open able portion with 12 mm thick clear float, glass
      necessary hardware fixtures of approved make and design,
      viz double action floor spring, brass flush bolt, satin finish
      stainless steel decorative tubular handle (Dorset or
      equivalent approx. 300 mm long) on both faces, complete
      as per drawing and instructions. Wooden surfaces shall be
      polished in approved shade NC lacquer in mat satin finish.
      The rate should also include cost for decorative etching on
      one side of the glass.
      a) Open able Portion                                             0.00    Sq .ft
      b) Fixed Portion                                                 0.00    Sq .ft

18.   ALUMINUM WORK
      ALUMINIUM MAIN GATE & WINDOW
      Including the following as per the site/design requirements
      to constitute the complete item. Facia sq.ft. area to be
      measured
      for payment P&F anodized 20 to 25 microns aluminum
      tubular
      rectangular sections for doors and windows and vents fixed
      on
      wall/ceiling by 3 screws in roll plug at a distance of 75cms
      c/c
      colour Electro coated all members complete fine finish.

(a)   P&F Color (Black) electro coated glazed aluminum door
      shutter,
      standard jindal/Hindalco extruded box section 2mm thick,
      vertical members 3-1/4"X3-1/4" and top, centre, bottom
      section 4-1/2"X1-3/4" with necessary neoprene gasket,
      Screw less clips, 5.0mm thick etched as designed float
      glass
      panes complete fine finish. Including stopper, hinges etc.
      complete hardware & fittings.                                    50.00   Sq .ft


                                                                                        Page Total
SL.   ITEM DESCRIPTION                                              QTY.         UNIT        RATE        AMT.
NO.                                                                                           (Rs.)      (Rs.)
(b)   P&F in position aluminum partitions Color (Black) Electro
      coated
      with 2.00mm thick box section of size 101.5mm X 38 mm
      placed horizontally and vertically fixed and bottom size
      112.5 X 38 mm with clips and snap on head along with
      rubber
      neoprene gasket inserted of 12mm thick prelaminated
      board
      or 5mm thick translucent glass approved colour ISI
      specified.
      The portion from 3'-0" onwards to apprvd ht shall have
      5mm
      thick plane glass fixed with clips and neoprene gasket as
      per
      design. Complete fine finish.                                  0.00        Sq .ft

19.   Providing and erecting in position low/ full height storage
      cabinet made of 19 mm thick BWR grade block board as
      per drawing including intermediate shelves, lockable
      shutters, etc conforming to the following specifications:
      Shutter faces shall be finished with 1 mm thick laminate
      sheet of same or combination shades as per instructions
      with polished teak wood (6mm thick) edge lip pings. Inner
      faces of cabinet including shutters shall be painted with
      two coats of synthetic enamel paint of approved shade and
      quality over a coat of approved primer (Quantity to be
      restricted to bare minimum as per actual requirement
      being costly item) (Actual face area will be measured
      for payment purpose).
      Shutters will be hung by auto- closing hinges of “Ebco” or
      equivalent Locks, magnetic door catcher and satin finished
      S. S. handles etc. will be (Payment shall be on the area of
      cabinet face)
      a) Maximum 457 mm deep X 914.00 mm high                       115.00       Sq .ft
      b)Maximum 457 mm deep X 2500 mm high (max.)
                                                                       0.00        Sq .ft

20.   Supplying wooden planter box (approx. 350 X 350 X 450
      mm high ) made of 19 mm thick BWR grade block board
      finished with 1.00 mm laminate sheet of approved shade
      and quality. Free edges of block boards shall be provided
      with polished steam beech wood lipping ( 6mm thick)
                                                                             1      Each

                                                                                            Page Total
SL.   ITEM DESCRIPTION                                             QTY.   UNIT    RATE        AMT.
NO.                                                                                (Rs.)      (Rs.)
21.   Providing and erecting in position, Manager’s / Officer’s
      Tables as per drawing and conforming to the following
      specifications:
      Basic structure of 19 mm thick BWR grade block board for
      sides, top and modesty panel, finished with 1.00 mm thick
      laminate sheet of approved shade and make including inner
      faces.
      Drawer – cum – cabinet unit of approximate overall size of
      400 X 500 X 600 mm (WXDXH) of 19 mm thick BWR
      grade block board and 12/6 mm thick BWR grade
      plywood. The drawer unit shall comprise of 3 sliding
      drawers. The drawer unit shall be finished with 1. mm
      thick laminate sheet of approved shade. Inner faces of
      cabinet
      shutters/ drawers shall be painted with 2 coats of
      white synthetic enamel paint over a coat of
      wooden primer.
      a) Manager Desk. (1829 X 750 X 750)                           1     Each
      b) Officer`s Desk (1524 X 750 X 750)                          3     Each

      Readymade keyboard drawer of engineering plastic (KD
      575 PMT/ INNOFITT SYSTEMS OR Equivalent
      approved make) and all necessary accessories, suitably
      suspended below table top:
      Quoted rates shall also include cost of polished teak wood
      moulding (finished 40X20 mm section) to edges of table
      top polished teak wood lipping (6mm thick ) to free edges
      of block board/plywood surfaces approved drawer-slides,
      hinges and locks with keys in duplicate other necessary
      hardware and accessories including satin finish S. S.
      handles knobs and wire – mangers etc. of approved quality.
      a) Approx. size of 1524 X 750 X 750 mm                        9     Each
      b) Approx. size of 1372 X 750 X 750 mm                        0     Each




                                                                                 Page Total
SL.   ITEM DESCRIPTION                                              QTY.        UNIT        RATE        AMT.
NO.                                                                                          (Rs.)      (Rs.)

22.   Providing and erecting in position side/ back cabinet units
      with sliding shutters of approx. size of 457 mm deep X 750
      mm high made of 19 mm thick BWR grade block boards
      including intermediate shelves as per drawing/instructions.
      Exposed block board surfaces shall be finished with 1.00
      mm laminate sheet of approved shade and make. Inner
      faces of sliding shutters shall be polished in approved
      colour.
      Free edges of block board surfaces shall have polished
      steam beech/ teak wood half round moulds (out of 2 X 20
      mm sections)
      Quoted rates shall include cost of necessary hardware, viz.
      handles locks with keys in duplicate, etc. (Actual face
      area will be measured for payment purpose)
                                                                    40.00         Sq .ft

23.   Supplying and erecting rectangular low height
      counters/clerical work stations (As per dwg X 750 X
      750 mm ) supported on side pedestals made of BWR grade
      block boards, low height partitions systems and / or
      intermediate block boards support and fixing of glass as
      per drawings and instructions.

      The top shall be of 18 mm thick mirror polished jet black
      granite slab of approved quality fixed with chemical
      adhesive over 19 mm thick BWR grade block board of
      approved quality including machine cut and polished on
      exposed surfaces and edges all completed as directed.
      Inner face of modesty panel. The underside of the block
      board and inner faces of modesty panel and free sides
      are to be painted with tow coats of synthetic enamel paint
      of approved shade and brand over a coat of approved
      wooden primer.
      Each work station shall comprise of a drawer unit
      keyboard drawer similar to that of Manager‟s/Officer‟s
      tables as specified in item no. 1 above including finishing
      hardware and accessories.
                                                                            3     Each




                                                                                           Page Total




SL.   ITEM DESCRIPTION                                              QTY.        UNIT        RATE        AMT.
NO.                                                                                   (Rs.)      (Rs.)

24.   Supplying and erecting running counter in Server room
      750 mm deep and 750 high – including drawer cum-
      cabinet unit for files, space for CPU of computer, modesty
      panel, tea tray etc. made with 19 mm thick phenol
      formaldehyde bor ded block board on top and supporting
      sides with necessary well seasoned hard wood frame work,
      finished on top and sides with 1.0 mm thick laminate of
      approved shade and quality supported on 19 mm thick
      BWR grade block board including providing and fixing
      450 mm long powder coated steel key board tray (with
      mouse tray) of approved shade. Work shall include 3 sets
      of drawer units keyboard drawer and CPU holders similar
      to that of other work stations including finishing, hardware
      and accessories at each of the work station. The keyboard
      is to be suspended from the table top, all complete as in
      drawing. All exposed edges of block board are to be
      provided with half round steam beech/teakwood
      mouldings, duly polished.
       Inner faces of wooden/block board surfaces are to be
      finished with minimum tow coats of synthetic enamel paint
      of approved shade and quality over a coat of approved
      primer.
      Rate to include charges for brass hardware fittings as well
      as fixtures like sliding gear for drawers of „Earl Behari‟ of
      similar approved make
                                                                      6.00   Rft.

25.   Supplying and erecting running counter/table for
      Daftari/Cash counting area 750 mm deep and 750 mm
      high made with 19 mm thick phenol formaldehyde bonded
      block board on top with necessary well seasoned
      Malayasion sal wood frame work, finished on top with
      1.00 mm thick laminate of approved shade and quality,
      including drawers, cabinets and required complete
      hardware, All exposed edges of block board are to be
      provided with half run steam beech wood mouldings duly
      polished.
      Inner faces of wooden /block board surfaces are to be
      finished with minimum two coats of synthetic enamel paint
      of approved shade and quality over a coat of approved
      primer.                                                         0.00   Rft.

                                                                                    Page Total
SL.   ITEM DESCRIPTION                                               QTY.       UNIT      RATE        AMT.
NO.                                                                                        (Rs.)      (Rs.)
26.   Supplying and erecting free –standing suggestions box of
      overall size 450 mm long X 300 mm deep X 900 mm high
      made of 19 mm thick phenol formaldehyde block board, all
      as in drawing, complete with hardware fittings and fixtures
      of approved make and quality.
      Top and all exposed surfaces of block board are to be
      finished with 1 mm thick laminate sheet of approved shade
      and quality. Inner faces of block board surfaces are to be
      finished with minimum tow coats of synthetic enamel paint
      of approved shade and quality over a coat of approved
      primer.                                                               1     Each

27.   Supplying and erecting cheque drop box (overall size 450
      mm X 300 mm X 750 mm) made of 19mm thick phenol
      formaldehyde bonded ply board and the curved portion at
      top made out of 90 mm X 90 mm C. P. teak wood section.
      A slit opening of 10 mm X 150 mm is to be provided at the
      top of the box. An open ble shutter of 259 mm X 262 mm
      size made of 19 mm thick phenol formaldehyde bonded
      block board is to be provided at 1.50 mm above finished
      floor level . all the exposed timber surfaces including all
      free edges are to be finished with 1 mm thick laminate
      sheet of combination shade. Inner faces of block board
      surfaces are to be finished with minimum tow coats of
      synthetic enamel paint of approved shade and quality over
      a coat of approved primer.
      Rate to include cost of necessary hardware fittings e. g.
      brass hinges lock, knob etc. of approved design and
      quality.                                                              1     Each

28.   Supplying and erecting wall mounted Customers writing
      ledge of approx. size 900 X 300 mm made of 12 mm thick
      machine polished smoke glass supported on decorating
      wrought iron wall brackets of suitable size and quality with
      vacuum bush including making slots made of glass as
      above for keeping forms / slips
                                                                            1     Each




                                                                                         Page Total
SL.    ITEM DESCRIPTION                                             QTY.       UNIT        RATE        AMT.
NO.                                                                                         (Rs.)      (Rs.)
29.    Supplying sofa settee made of 100 mm thick high density
       foam at the seat and 75 mm thick high density foam at the
       back supported on well seasoned 1 st class teak wood
       frame work upholstered with fabric of approved design and
       quality including polishing the exposed timber surfaces in
       approved colour and finished with melamine lacquer in
       mat stain finish, complete as directed as per requirement
       Rate of fabric should not be more than Rs. 200.00 per sqm.
                                                                           9   Per seat

                                                                                          Page Total



       Total Cost of Wooden Furnishing work                                               Rs.


NOTE:- All items should be completed in all respect.




               .
                     PART – II (ELECTRICAL & TELEPHONE WORK)
                     SPECIFICATIONS OF THE METRIALS TO BE USED

Description                                               Brand
11 KV CIRCUIT BREAKER PANEL                               ABB / SEIMENS /
11 KV / 0.4 KV TRANSFORMERS                               CROMPTON / KIFLOSKER / SEIMENS
BATTERY CHARGING PANEL                                    KELTRON / NELCO
BATTERIES                                                 EXIDE / AMCO / STANDARD /
                                                          PANASONIC
11 KV ISOLATOR AND D O FUSES                              AMEI / ELLPRO / STERLING
Capacitor                                                 L & T / DUCATI / EPCOS
APFC relay                                                L & T KHATAU / DUCATI / EPCOS
M.C.B. / RCCB / RCBO/ MCCB                                 ABB / MDS / MDS, L & T ABB, HAVELL‟S
Distribution Boards                                        ABB / MDS / L.&T
Switch Fuse Units With Hrc Fuses                          GE / L&T / ABB
Moulded Case Circuit Breaker (MCCB)                       ABB (T MAX) / L & T (D SINE) / SIEMENS
Air Circuit Breakers                                      ABB (EMEX/L&T(C POWER) / SIEMENS
Current transformer / meters / voltage / Transformers /   L & T / SIEMENS / AUTOMATIC electric /
Relays / Starters / Contactors / Selector Switch /        control & switch gears / abb
Indicating Lamps
Change over switches                                      GE / L&T / ABB / HAVELLS
Cable Glands and Sockets                                  SIEMENS / JAINSON / COMET
PVC insulated Copper conductor wires                      FINOLEX / RR / POLYCAB
Telephone Wires and cables                                FINOLEX / NATIONAL / L&T/ HAVELL‟S
Telephone Coaxial cable                                   FINOLEX / RR / RPG / L&T
PVC / XLPE Insulated 11 KV / 1.1 KV cables                UNIVERSAL / FORT GLOSTER / NICCO /
                                                          FINOLEX / POLYCAB
Switches and Sockets outlets (Conventional piano type)    ANCHOR
Switches and Sockets outlets (Modular type)               MK / MDS-MOSAIC/ S. S. K. SIGNATURE,
                                                          ROMA TERESA
Industrial outlet                                         L&T/ HAVELL‟S/ ABB
MIS Conduits and Accessories                              B.E.C. / AKG / MK
PVC Conduits and Accessories                              AKG / BEC / CAP / SEIKO / PRECISION
Fluorescent Tube Fitting                                  PHILIPS / WIPRO/ HAVELL‟S
Incandescent Tube Fitting                                 DECON / PHILIPS / BAJAJ / WIPRO
Hpmv / hpsv / halogen Lamp                                PHILIPS / WIPRO / BAJAJ / CROPTON /
                                                          GREAVES
Ceiling Fans / Exhaust Fans                               CROMPTON / BAJAJ / USHA / KHAITAN/
                                                          HAVELL‟S
Floor / Wall Raceways to date                             MK / LK / MDS
Computer networking – outlet                              AMP / SYSTEMAX / LUCENT
Electronic Energy Meters                                  SECURE / L&T / ENERCON
UPS                                                       EMERSON / POWER WARE / TATA
                                                          LIBERT / DB ELECTRONICS
Ceiling Rose holders                                      ANCHOR
Buzzers / Bell Push bell                                  ANCHOR / MAX
        MCB Distribution Board                            MDS / LEGRAND / SIEMENS
        HRC Switch Fuse nits                              SIEMENS ABB/GE/L&T
        Cable Glands / Lugs                               SIEMENS / DOWELLS
        Electronic Regulator                              MK / ANCHOR / ROMA / LEGRAND / MDS
        Contactors                                        SIEMENS / L&T / ABB/ SCHNIEDER
        Geysers / water / heater                          SPHERE HOT / RACOLD / USHA
        PVC INSULATED COPPER CONDUCTOR WIRES              FINOLEX / NATIONAL / L&T/ HAVELL‟S
        PVC CONDUIT PIPE & BAND, JUNCTION BOX             JINDAL
        ETC
        LUGS                                              DOWELLS CRIMPING TYPE
        EPABX                                             TATA / MATRIX
        AIR CONDITIONING UNIT (WINDOW / SPLIT /           VOLTAS / BLUE STAR / CARRIER /
        HIGH WALL / CEILING MOUNTED)                      HITACHI / DAIKIN




NB : 1) ALL MATERIALS SHOULD CONFIRM TO RELEVANT STANDARDS AND CODES OF BIS.




  SL.   ITEM DESCRIPTION                              QTY.       UNIT      RATE    AMT.
NO.                                                                         (Rs.)        (Rs.)
The rates for the point wiring shall include providing
fixing testing and commissioning of followings :-

a)     Circuit wiring, Sub-main wiring, etc .
       SUBMAIN WIRING
       Submain wiring with following sizes 11 V grade,
       single core, PVC insulated flexible FRLS copper
       conductor cable (IS: 694) through suitable size
       M. S. conduit (ISI marked embossed on conduit
       surface) complete with junction box, circular box,
       elbows, bends and other accessories on surface
       above false ceiling or concealed by chase cutting
       on wall, as per site condition, mending good all
       damages to original finish, inter connection,
       painting etc. as required to be completed in all
       respect. All connections of wires to be done by
       means of “Wago” type connectors :
       With 4 Nos. 16 sq. mm + 2 No. 10 Sq mm.
       (Green colour for earth) PVC insulated FRLS
       copper wire.

b)     Earthing of all switch box all outlet boxes fitting,
       fans, 3 rd pin of plug with 1/18 PVC insulated
       copper wire.

c)     Covering of all outlets boxes, pull boxes, junction
       boxes etc. with 2.80 mm thick white front hylem
       cover plates with brass cup washer & screws.

d)     Embedding all P. V. C. conduits in walls laying
       in slabs, above false ceiling including all
       accessories as required, cutting and refilling the
       chases with cement mortar.

e)     Providing, fixing switches, sockets, M. S. boxes
       (18 SWG thick) draw boxes, brass screws, ceiling
       rose/ connector etc.

f)     All the P. V. C. Conduit pipe above false ceiling
       must be laid in channel / tray & PVC conduit
       pipes running along the walls must be embedded
       inside the wall.

                                                                       Page Total 0.00


SL.    ITEM DESCRIPTION                                       QTY.   UNIT     RATE         AMT.
NO.                                                                                  (Rs.)      (Rs.)
g)    Wiring for following points using PVC insulated
      Copper conductor wires of 650V / 1100V grade in
      ISI PVC Conduit concealed/ exposed including
      switches & sockets as above.

1.    P& F A. C. POWER POINT with wiring etc. as
      follows:-
      A. C. power point wiring from DB with 1100 volt grade
      2 Nos. single core 4 sq.mm + 1 No. 2.5 sq. mm (Green
      colour for earthing ) PVC insulated flexible FRLS
      copper conductor cable through suitable size M. S.
      conduit (ISI marked embossed on conduit surface)
      complete with junction box, circular box, elbows, bends,
      couplers and other accessories on surface above false
      ceiling or concealed by chase cutting on wall complete
      with North- West make 25 A Socket, 25A Starter,
      mounting box & front plate, interconnection, mending
      good all damages to original finish, painting etc. as
      required. All connections of wires to be done by means
      of „Wago‟ type connectors.
                                                                  5         Each

2.    P& F 6 / 16 A SOCKET OUTLET POINT with wiring
      etc. as follows:-

      WIRING
       Wiring for 6 pin/16 A shuttered socket outlet with
      controlling switch from DB with 1100 volt grade 2 Nos.
      single core 2.5 sq. mm + 1 Nos. 1.5 sq. mm (Green
      colour for earthing) PVC insulated flexible FRLS
      copper conductor cable (1S:694) through suitable size
      M. S. conduit (ISI marked embossed on conduit surface)
      complete with junction box, circular box, elbows, bends,
      couplers and other accessories on surface above false
      ceiling or concealed by chase cutting on wall.
      The work incluces supply & fixing of modular type
      6/16A 6 pin shuttered socket outlet with controlling
      switch, indicator, suitable size mounting box and front
      plate for socket outlet flushed with finished wall,
      mending good all damages to original finish,
      interconnection, painting, etc. as required to be
      completed in all respect. All connections of wires to be
      done by means of „Wago‟ type connectors.                          7     Each

                                                                                   Page Total

SL. ITEM DESCRIPTION                                             QTY.       UNIT      RATE      AMT.
NO.                                                                                    (Rs.)    (Rs.)
3.    POINT WIRING
     Point wiring with 1100 V grade 3 Nos. single core 1.5
     sq. mm (1 for phase 1 (Black colour) for common
     neutral by looping method and 1 (Green colour) for
     common earth by looping method) PVC insulated
     flexible FRLS copper conductor cable (IS:694) through
     suitable size M. S. conduit (ISI marked embossed on
     conduit surface) complete with junction box, circular
     box, elbows, bends, couplers and other accessories on
     surface above false ceiling of concealed by chase cutting
     on wall from light & fan switch board to light, fan & 6A
     socket outlet on the same switch board of separately
     mounted switch board.
     The work includes supply and fixing of all materials
     such as North-West/MDS/Woods make modular type
     6A switch, 3 plate ceiling rose/ angle or batten holder
     etc. as required. The point wiring also includes circuit
     wiring with 1100 V grade 2 nos. single core 2.5 sq. mm
     (1 for phase and 1 (Black colour) for neutral) + 1 no.
     single core 1.5 sq. mm (Green colour for earth) PVC
     insulated flexible (FRLS) copper conductor cable
     (IS:694) through suitable size M. S. conduit as described
     above from DB to switch board, interconnection,
     mending good all damages to original finish, painting
     etc. as required to be complete in all respect.

     All connections of wires to be done by means of
     “Wago” type connectors, (All wiring in strong room,
     locker room, records & stores will be of surface conduit
     type.)

a)   Light points (One light point controlled by one switch)      19    Each

b)   Light points (Two light point controlled by one switch)      12    Each

c)   Exhaust fan point                                            2     Each

d)   Wall bracket fan point with supply and fixing of 6A
     socket near the fan and controlling switch at light/fan
     switch board.                                                8     Each

d)   Ceiling fan point with supply and fixing of Electronic
     Regulator (2 module step, 280 watt (mtn.)                    2     Each

                                                                               Page Total




SL. ITEM DESCRIPTION                                             QTY.   UNIT     RATE       AMT.
NO.                                                                               (Rs.)     (Rs.)
e)      Call bell point with bell push                            1.00       Each

f)      1 X 6A 2/3 pin shuttered socket with switch on separate
        switch board other than light/ fan switch board/on work
        stations with connections of maximum 3 Nos. Sockets
        in one circuit by looping method.
                                                                   ----      Each

g)      2 X 6A 2/3 pin shuttered socket with individual
        controlling switch on separate Switch Board other than
        light/fan switch Board                                     ---       Each

h)      1 X 6A 2/3 pin shuttered socket outlet with switch on
        light and fan switch board.                                ---       Each

4.      Providing & fixing computer outlet boxes in 18 SWG
        M. S. box including Hylam sheet and 3 nos. 5 pin 15
        amp. Socket and 1 no. 15 amp. Switch. Including wiring
        in conduit.                                                10        Each

5 (a)   Gel Earthing with copper Electrode of size 50mm x 2m
        by embodying 2.5 mtr. below the ground level including
        all accessories like nut, bolts, C.C. finished chamber
        covered with hinged type with locking arrangement C.I.
        Cover, C.I. Frame of size 300mm x 300mm complete
        with filling of ash gel compound, testing of earth
        resistance as required.                                       1.00   Each

(b)     25x 3mm copper strip from earth pit to nearest wall.        15.00    Meter

(c)     8SWG copper wire                                            25.00    Meter

                                                                                     Page Total




SL. ITEM DESCRIPTION                                              QTY.       UNIT      RATE       AMT.
NO.                                                                                     (Rs.)     (Rs.)
 7.   Supply and fixing of 1.5 meter length 3 core 2.5 sq. mm
      PVC insulated copper wire with 3 pin 6A plug top at
      one end and the other end to be fixed with Switch Board
      of Strong Room and Locker Room.
                                                                    1.00       Each


18.   Supply & fixing of M. S. electrical panel, If required
      for the branch‟s additional electrical load. As per the
      branch „s Electrical load distribution and circuits.
      Complete work in all respects.
      All items to be Havells / MDS/ L&T/ Siemens make.
      Details:-
      Electrical Panel Box                                             1     Nos.
      MCCB 100A                                                        1     Nos.
      MCCB TPN 32A for light power and UPS in TPN DB
      (To be fixed in above panel) including installation etc.
      complete                                                         2     Nos.
      MCB TPN 63A                                                      1     Nos.
      MCB DP 100A                                                      2     Nos.
      MCB SP 6/32A                                                    20     Nos.
      MCB 40 A DP with all standard accessories for UPS
      input                                                            1     Nos.
      Volt Meter                                                       1     Nos.
      Amp. Meter                                                       1     Nos.
      C. T.                                                            3     Nos.
      Indicator                                                        3     Nos.
      Busbar                                                           1     Nos.
      VSS                                                              1     Nos.
      ASS                                                              1     Nos.
      Labour and Assembling charges                                    1     Nos.


                                                                 Total (For Panel )         Rs.

                                                                                      Page Total

                                                                            TOTAL           Rs.




                                   TELEPHONE SYSTEM
S.No.                        Details                        Qty.      Unit         Rate     Amt Rs.

(B)     TELEPHONE SYSTEM:
        Conduits for telephone rates will include supply
        & fixing of the followings :-
        a) All accessories for conduit inspection boxes,
        junction boxes, draw boxes covered white hylem
        2.80 mm thick white cover plates.

        b) Embedding PVC Conduits in walls / in roofs ar
        slab or laying above false ceiling including
        cutting refilling the chases with cement mortar
        and repairing as required.

        c) Brass cup washers & screws GI, pull wire,
           wherever required.

        d) End termination in tag block with ferrules,
        soldering wires.
        Including
        Supply & Laying PVC conduits 16 swg thick of
        the following sizes:
        a) PVC 1" wide casing/ caping

        S & fixing jack pin telephone outlets, with
        bakalite cover plates brass screws as required in
        M. S. outlet box (18 SWG) of size 75 mm X 75
        mm X 60 mm deep including.
        Supply, laying effecting proper termination,
        testing and commissioning of annealed tinned
        electrolytic copper conductor insulated and
        sheathed wires (3 pairs) with conduit/ PVC casing
        / caping (unarmored) for telephone as required.             5 Nos.

        S & fixing of EAPBX of martix/ BPL/
        Amtex make of 2-10 entries.                                 1 Nos.

                                                                   TOTAL     Rs.

            Total Cost of Electrical & Telephone work                                 Rs.




                             PART – III AIR CONDITIONING WORK
S.
No.                                      Details                             Qty.     Unit   Rate        Amt Rs.

1          AIR CONDITIONING UNIT
           Supply and handing over of following equipment as per
           specification, Schedule and Drawing at least 3 star
           rated (Hitachi / Blue star / Voltas / Carrier
           Supply of Split type Air Conditioning unit, each comprising
           of an out door and single hi - wall mounted in door unit.
           Condensing unit shall be complete with hermetically sealed
           rotary compressor & air cooled condensor with fan
           evaporrating unit shall consist of a fan section with
           dynamically balanced centrifugal fan driven by FHP motor,
           multi rows deep cooling coil of copper tubes with
           aluminium fins, thermostatic expansion valve etc. the
           evaporating
           unit shall be equipped with synthetic fiber filter, insulated
           drain pan safety controls thermostate all complete in a unit.
           single phase split unit.
           Supply of High Wall Split Unit
           with cordless remote
        a) Supplying of 1.5 TR Split AC                                             4 Nos.
        a) Supplying of 2.0 TR Split AC                                             1 Nos.


    2       Installation of wooden frame after cutting of windows
            grill / wall as required and finish the same in original shape
            also M S cages for A C protection                                       0 Nos.


                                                                                        Page Total Rs.




S.
No.                                      Details                             Qty.     Unit   Rate        Amt Rs.

    3       Installation ,testing and commissioning of
    above including all accessories up to 10 R/FT length
    of copper pipe setc. Complete.                                     5 Nos.

4   Voltage stablisers 3 step cripped with                             5 Nos.
    TDR - 5 KVA
    I/P Voltage : 140-280 V
    O/P : 230 V

5   P & F ELECTRICAL WIRING AND
    REFREGERENT PIPING ABOVE 10 R Ft                                   50 Rmts

6   Condensate drain water piping 1" and 2" Dia PVC
    Duly Insulated to nearest drain trap to be laid concealed.         40 Rmts

7   P/F MS Stand & cage for condensers will be of
    framed as per condenser size with angle 35X35X5mm
    and 25X25X3 mm respectively. Stand will be embedded in
    ground 6" deep with PCC 1:3:6 and cage frame will be covered
    with jali 1"X1" of 12 SWG including painting and locking
    system as per direction architect and engineer.                5      Nos.




                                                                        PAGE TOTAL RS.




                                                                                 TOTAL Rs.
                                     PART – IV (DATA CABLING WORK)

S.No.                                Details                               Qty.    Unit   Rate   Amt Rs.
  1.    COMPUTER NETWORKING
  A     Computer networking points with 4 pair, 24 AWG UTP Cat 6            Each     10
        Cable as per latest ammendments of TIA /EIA 568 B.2-1
        Specifications in PVC Conduits including making connections to
        Information outlets and Patch Panels with ferruling at both ends
        for identification with necessary tools for punching, stripping,
        crimpping and testing required .
  B     Supply , Installation and Testing of 4 pair , 100 Ohm, 24 AWG ,
        E Cat 5 UTP, flexible , Double ended Patch Cords along with 2
        No of RJ 45 connectors with strain relief boots as per TIA /EIA
        568 B.2 Specifications including making connections to Inform
        outlets of lengths.
         1.0/ 2.0/ 3.0 Meter as required.                                   Each     20
  C     Faceplate for Flush Mount Information Outlets Single Aperture       Each     10
        with screw hole covers & Icon Tree Size 86mmX86mm
        including pvc/ ms box.

                                                                                    TOTAL RS.




   Date:-

   Place:-

								
To top