2003-Mathews-Owners-Manual by shuifanglj

VIEWS: 1,458 PAGES: 7

									’03 owner’s manual cover            5/27/03     12:43 PM        Page 1

       Mathews Genesis™ the first compound
       bow that covers all draw lengths (15" to 30")
          Until now, one of the challenges of
          introducing beginners to archery was
          that bows were too user specific.
          Genesis TechnologyTM changes that!

                                                         Everyone can shoot the same bow
                                                         • Kids can’t outgrow it – because there
                                                           is no specific draw length
                                                         • It’s simple to buy – no need to measure
                                                           or fit for draw length
                                                         • It’s easy to shoot – beginners won’t
                                                           develop bad habits because the draw
                                                           length is always right

       “Zero let-off” means no specific
       draw length
       Because the Genesis SystemTM eliminates let-off
       on light draw weight bows (where it’s unneces-
       sary), there are no specific draw length
       requirements. The result is a bow
       that fits virtually everyone (15" to
       30") and that a young person
                                                                                                  Colors: Red
       can’t outgrow.                                                                                  Cherry,
                                                                                    Key Lime, Lemon Yellow,
       Performs like a bow with                                                    Blue Raspberry, Wild Berry
                                                                                      and Realtree X-tra camo
       higher poundage
       A GenesisTM bow, set at 20 lbs.                                                                                   ™
       (it’s adjustable from 10 to 20
       lbs.), stores and releases
       energy comparable to
       that of a 35 lb. recurve!
       Plus, with zero let-off,
       it has the “holding
       weight” necessary to
       “pull the string from your
       fingers,” making it easy to shoot.
                                                            Ensure the future of archery
                                            Join the Genesis Project!

                                            Catch us if you can!
                                                                                                                 Owner’s Manual
                             919 River Road, P.O. Box 367, Sparta, Wisconsin 54656
                                  (608) 269-2728 • Fax (608) 269-3120
’03 owner’s manual all                   6/2/03           12:02 PM             Page 1

      Maintaining your Mathews™ SoloCam® bow...                                                                                            Like many of the world’s top competitive shooters,
                                                                                                                                           you, too, can now say “I shoot a Mathews.” Congratulations!
      Never dry fire your bow                                                                                                              Your new Mathews bow features the latest design innovations and
                                                                                                                                           the highest quality components. They team up to create a bow
      Never shoot any bow without an arrow on the string. Without the arrow to absorb the energy,                                          that’s fast, smooth, quiet and accurate. To ensure your bow’s peak
      dryfiring can damage your bow and can cause personal injury. Damage to your bow due to                                               performance, take a few moments to look over this owner’s manual.
      dryfiring will not be covered under the warranty.
                                                                                                                                           Good shooting and good hunting!
      Periodically check strings and cables
      Always inspect your bow for frayed strings and cables. Replace damaged strings and cables
      immediately. Mathews strings can be waxed and maintained as any other fast-flight string.
      Please make sure you are using the proper string for your bow.
                                                                                                                                           Owner’s Manual
                                                                                                                                           Setting up your new Mathews bow...
      Bushings are self-lubricating                                                                                                        As you probably know, once your Mathews bow is properly tuned, it will stay in
                                                                                                                                           tune thanks to the single-cam design. However, initial setup of draw length, weight,
      Your Mathews SoloCam bow requires no lubrication – all bushings are self-lubricating.
                                                                                                                                           nock point, etc. is critical to maximize the performance of your new bow.

      Do not alter your bow                                                                                                                Draw Length
      Any alterations to your Mathews SoloCam bow will void the warranty. Alteration could cause                                           If your new Mathews SoloCam bow is equipped with a "StraightLine" MaxCam,
      damage to the bow or personal injury.                                                                                                which is draw length specific, there is no adjustment on the cam. Other Mathews
                                                                                                                                           cams are adjustable for draw length and come set at the longest draw length setting
                                                                                                                                           unless your retailer has indicated otherwise. Mathews offers several cam sizes to
      Use only a double-pull bow press                                                                                                     help ensure optimum draw length and performance for your measurements and
      Never use a single-pull bow press. We recommend a double-pull press to avoid damage to                                               shooting style. The draw length on your bow is adjustable on the cam a maximum of
      your riser or bow. Damage caused by a single-pull press will not be covered under warranty.                                          one inch down from the peak draw length. This is accomplished by moving the
                                                                                                                                           string loop to any of three adjustment posts on either side of the cam. The number
                                                                                                                                           1 post would be the longest draw length for that particular cam. For example: to
      Repairs and Shipment                                                                                                                 shorten the draw by 1/2 inch, the string would be moved to the number 2 post on
      Visit your Mathews retailer for servicing and repairs. All bows and warranty parts returned                                          both sides of the cam. The Mini MaxCam can be adjusted down from its peak draw
                                                                                                                                           length, approximately 1/2". This is accomplished by moving the string loop to the
      to the factory will require a Return Authorization (RA) number that your retailer can secure.
                                                                                                                                           secondary post on the cam.
      Your retailer will handle all warranty issues for you. The RA number must be clearly printed
      on the outside of the box near the address label. If a package does not have an RA number,                                           Draw Weight
      our shipping department will refuse it.
                                                                                                                                           Mathews SoloCam bows have a ten pound weight reduction range from your bow’s
                                                                                                                                           peak weight (example: if your bow has a peak weight of 70 pounds, you can adjust it
      Warranty information
                                                                                                                                           as low as 60 pounds). Draw weight adjustments are made using either a 3/16" or 7/32"
      Every Mathews SoloCam bow has a LIMITED LIFETIME WARRANTY. Warranty repairs are our top priority. Each bow has a
      unique serial number, and warranty cards are not required to obtain warranty service. Should you ever need repairs, the Mathews      Allen wrench. Turn the limb bolt clockwise to increase the draw weight and counter-
      retailer from whom you purchased your bow is very knowledgeable about the bows and may be able to complete the work right in         clockwise to decrease the weight. Each rotation is equivalent to three or four pounds
      their shop. If the bow does need to be sent to us, we assure you that we do strive to do the warranty repairs and service work and
      re-ship your bow within three working days from the time it arrives in our shop.                                                     of draw weight. It is very important to adjust the limb bolts equally but do not
                                                                                                                                           exceed 5 full turns out from maximum draw weight. Your Mathews SoloCam bow
                               LIMITED LIFETIME WARRANTY                                                                                   will generally perform best at its designated peak weight.
                                                                                                                                           Nock Point Installation
           NUMBER WILL BE REFUSED. ANY AND ALL WARRANTIES, WRITTEN OR IMPLIED, ARE VOID WITH ANY                                           There are many variables involved in determining where to install your nock point.
                                                                                                      Honesty is the best policy...
                                                                                                                                           These include: type of arrow rest, arrow spine, whether you use fingers or a release
                                                                                                                                           aid, and your hand placement on the bow. As a general rule, the nock point should
      Mathews bows are covered by one or more of the following patents, with other patents pending:
      #5,368,006, #5,676,123, #5,752,496, #5,791,322, #5,809,982, #5,890,480, #5,996,567
                                                                                                                                           be set perpendicular (90°) to your arrow rest or somewhere within 1/2" above the 90°
                                                                                                                                           point. This guideline is a starting point – you may need to move your nocking point
                                                                                                                                           as you fine-tune your Mathews SoloCam bow.
      14                                                                                                                                                                                                                       3
’03 owner’s manual all           6/2/03    12:02 PM   Page 2

      The following is a breakdown of Mathews’ available cams
      and how each is adjusted for draw length:

      About the MaxCam™ on your bow
      Mathews invented the perimeter-weighted cam, technology that creates a flywheel
      effect which lengthens and strengthens the cam’s power stroke, dramatically
      increasing arrow speed while also reducing recoil. We call our perimeter-weighted
      cams "MaxCams". There are multiple different MaxCams:
      Note: MaxCams are not compatible with any Mathews
      non-MaxCam model. The use of a MaxCam™ on such models will void the
      warranty of that bow.

      High Performance (HP) Cam
      The LEAST COMPLEX, MOST ADVANCED cam ever engineered, the
      revolutionary HP Cam is superior to any cam (single cams, 11/2 cams, two cams)
      we've ever tested! This smooth shooting, straight line, high let-off cam is smokin'
      fast! And, it is available on the Mathews LX in either 80% or 65% let-off.

          CAM             LX      Let-off RH or       CAM             LX      Let-off RH or
                      DRAW LENGTH          LH                     DRAW LENGTH          LH
          SLHP-AR         30"        80%    RH        SLHP-AAR        30"      65%     RH
          SLHP-B.5R      29.5"       80%    RH        SLHP-AR        29.5"     65%     RH
          SLHP-BR         29"        80%    RH        SLHP-B.5R       29"      65%     RH
          SLHP-C.5R      28.5"       80%    RH        SLHP-BR        28.5"     65%     RH
          SLHP-CR         28"        80%    RH        SLHP-C.5R       28"      65%     RH
          SLHP-D.5R      27.5"       80%    RH        SLHP-CR        27.5"     65%     RH
          SLHP-DR         27"        80%    RH        SLHP-D.5R       27"      65%     RH
          SLHP-E.5R      26.5"       80%    RH        SLHP-DR        26.5"     65%     RH
          SLHP-ER         26"        80%    RH        SLHP-E.5R       26"      65%     RH
          SLHP-F.5R      25.5"       80%    RH        SLHP-ER        25.5"     65%     RH
          SLHP-FR         25"        80%    RH        SLHP-F.5R       25"      65%     RH
          SLHP-AL         30"        80%    LH        SLHP-AAL        30"      65%     LH
          SLHP-B.5L      29.5"       80%    LH        SLHP-AL        29.5"     65%     LH
          SLHP-BL         29"        80%    LH        SLHP-B.5L       29"      65%     LH
          SLHP-C.5L      28.5"       80%    LH        SLHP-BL        28.5"     65%     LH
          SLHP-CL         28"        80%    LH        SLHP-C.5L       28"      65%     LH
          SLHP-D.5L      27.5"       80%    LH        SLHP-CL        27.5"     65%     LH
          SLHP-DL         27"        80%    LH        SLHP-D.5L       27"      65%     LH
          SLHP-E.5L      26.5"       80%    LH        SLHP-DL        26.5"     65%     LH
          SLHP-EL         26"        80%    LH        SLHP-E.5L       26"      65%     LH
          SLHP-F.5L      25.5"       80%    LH        SLHP-EL        25.5"     65%     LH
          SLHP-FL         25"        80%    LH        SLHP-F.5L       25"      65%     LH

      4                                                                                       13
’03 owner’s manual all   6/2/03   12:02 PM   Page 3

                                                      Black Max 2 Cam Chart
                                                      This is the cam that powers the Mathews Black Max 2, the fastest bow on the plan-
                                                      et! It delivers maximum speed with minimum kick and is available in either 80% or
                                                      60% let-off. Or, for maximum speed, in a Turbo Cam version which has 50% let-off.

                                                        CAM               CAM                     TURBO CAM       BLACK MAX 2      RH or
                                                        (80% let-off)     (60% let-off)           (50% let-off)   Draw Length       LH
                                                        BMX2HL-30R        BMX2-30R                TURBO-3OR           30"           RH
                                                        BMX2HL-29.5R      BMX2-29.5R              TURBO-29.5R        29.5"          RH
                                                        BMX2HL-29R        BMX2-29R                TURBO-29R           29"           RH
                                                        BMX2HL-28.5R      BMX2-28.5R              TURBO-28.5R        28.5"          RH
                                                        BMX2HL-28R        BMX2-28R                TURBO-28R           28"           RH
                                                        BMX2HL-27.5R      BMX2-27.5R              TURBO-27.5R        27.5"          RH
                                                        BMX2HL-27R        BMX2-27R                TURBO-27R           27"           RH
                                                        BMX2HL-26.5R      BMX2-26.5R              TURBO-26.5R        26.5"          RH
                                                        BMX2HL-26R        BMX2-26R                TURBO-26R           26"           RH
                                                        BMX2HL-25.5R      BMX2-25.5R              TURBO-25.5R        25.5"          RH
                                                        BMX2HL-25R        BMX2-25R                TURBO-25R           25"           RH
                                                        BMX2HL-30L        BMX2-30L                TURBO-30L           30"           LH
                                                        BMX2HL-29.5L      BMX2-29.5L              TURBO-29.5L        29.5"          LH
                                                        BMX2HL-29L        BMX2-29L                TURBO-29L           29"           LH
                                                        BMX2HL-28.5L      BMX2-28.5L              TURBO-28.5L        28.5"          LH
                                                        BMX2HL-28L        BMX2-28L                TURBO-28L           28"           LH
                                                        BMX2HL-27.5L      BMX2-27.5L              TURBO-27.5L        27.5"          LH
                                                        BMX2HL-27L        BMX2-27L                TURBO-27L           27"           LH
                                                        BMX2HL-26.5L      BMX2-26.5L              TURBO-26.5L        26.5"          LH
                                                        BMX2HL-26L        BMX2-26L                TURBO-26L           26"           LH
                                                        BMX2HL-25.5L      BMX2-25.5L              TURBO-25.5L        25.5"          LH
                                                        BMX2HL-25L        BMX2-25L                TURBO-25L           25"           LH

                                                      StraightLine MaxCam3™
                                                      The StraightLine MaxCam3 was designed specifically for the Mathews Legacy.
                                                      In conjunction with String Suppressors, Harmonic Damping and Parallel Limb
                                                      design, this perimeter-weighted MaxCam helps to virtually eliminate overall
                                                      recoil vibration.

                                                       Cam     Mathews      Let-off       Right        Cam     Mathews   Let-off   Left
                                                                Legacy                    Hand                  Legacy             Hand
                                                       SL3AR      30"        70%          Right        SL3AL      30"     70%      Left
                                                       SL3B.5R   29.5"       70%          Right        SL3B.5L   29.5"    70%      Left
                                                       SL3BR      29"        70%          Right        SL3BL      29"     70%      Left
                                                       SL3C.5R   28.5"       70%          Right        SL3C.5L   28.5"    70%      Left
                                                       SL3CR      28"        70%          Right        SL3CL      28"     70%      Left
                                                       SL3D.5R   27.5"       70%          Right        SL3D.5L   27.5"    70%      Left
                                                       SL3DR      27"        70%          Right        SL3DL      27"     70%      Left
                                                       SL3ER      26"        70%          Right        SL3EL      26"     70%      Left
                                                       SL3FR      25"        70%          Right        SL3FL      25"     70%      Left
                                                       SL3GR      24"        70%          Right        SL3GL      24"     70%      Left
      12                                                                                                                                   5
’03 owner’s manual all      6/2/03     12:02 PM     Page 4

      Concentric SoloCam™
      In an effort to squeeze every last ounce of consistency out of the Mathews Icon, we    Tuning your Mathews™ SoloCam® bow...
      developed the Concentric Solocam, a round, perimeter-weighted cam that mirrors
      the round wheel on the opposite limb. This symmetry in shape and measurement           Tiller
      results in never-before achieved systematic consistency and ultimately, accuracy.
                                                                                             Setting the tiller on your Mathews SoloCam bow is easy. In fact, there’s no measur-
          Cam                  Icon                 Let-off           Right or Left Hand     ing necessary. Starting from a point where both limbs are tightened completely,
                                                                                             simply back them off an equal number of turns.
          CSL-AR                30"                  70%                     Right
          CL-B.5R              29.5"                 70%                     Right           Estimating Center Shot
          CSL-BR                29"                  70%                     Right           Using the correct arrow size, position your arrow on the string at the nock point.
          CSL-C.5R             28.5"                 70%                     Right           While holding the bow in front of you, visually align the bow string with the center
          CSL-CR                28"                  70%                     Right           line of the grip. The string should run true down the center of your arrow shaft.
          CSL-D.5R             27.5"                 70%                     Right           This is a good reference point to begin paper tuning. Note: A good starting point is
                                                                                             13/16" over from the riser to center of arrow shaft.
          CSL-DR                27"                  70%                     Right
          CSL-ER                26"                  70%                     Right           The Importance of Paper Tuning and Tear Patterns
          CSL-FR                25"                  70%                     Right
                                                                                             With an improperly tuned bow, broadheads may shoot as much as 18" off center at
          CSL-GR                24"                  70%                     Right           20 yards (when compared to field tips). By tuning a bow to shoot a good hole in
          CSL-AL                30"                  70%                     Left            paper, you will ensure the best possible broadhead flight.
          CSL-B.5L             29.5"                 70%                     Left
          CSL-BL                29"                  70%                     Left            Before beginning, it’s important to know that perfect “bullet holes” are not always
          CSL-C.5L             28.5"                 70%                     Left            possible with all shooters. Light tears are quite acceptable and will not deter accu-
                                                                                             racy. Fine tuning requires patience and consistent shooting form. Perfect results
          CSL-CL                28"                  70%                     Left
                                                                                             are only achieved with perfect form. Also, remember to always do your final sight-
          CSL-D.5L             27.5"                 70%                     Left            ings with broadheads before hunting.
          CSL-DL                27"                  70%                     Left
          CSL-EL                26"                  70%                     Left            To begin paper tuning, stand approximately eight feet from the paper (with a suit-
          CSL-FL                25"                  70%                     Left            able backstop several feet behind the paper to allow complete arrow passage).
          CSL-GL                24"                  70%                     Left            Check your tear pattern against the following boxes for further instruction.
                                                                                             If it’s a combination, such as up and to the left, both instructions will apply.

                                                                                              After the shot, push the paper back flat
      Fin or Feather™ Cam                                                                     and you will see a star shaped entry
                                                                                              hole where the tip went through.
                                                                                                                                           Nock End Ripped High
                                                                                                                                                                                     Nock End Ripped Right
                                                                                                                                                                                     Arrow Spine Too Stiff
                                                                                                                                                                                                                               Nock End Ripped Left
                                                                                                                                                                                                                               Arrow Spine Too Limber
      The Fin or Feather Cam is a low let-off cam that allows you to release an arrow any-                                 Tip went
                                                                                                                                            1. Lower the nocking point
                                                                                                                                            2. Use a lighter arrow tip
                                                                                                                                                                                         1. Increase draw weight
                                                                                                                                                                                                                                   1. Decrease draw weight
                                                                                                                                            3. Use a more stiffer spined arrow
      where along the draw cycle (full draw, 3/4 draw, 1/2 draw, etc.). This perimeter-                                    thru here
                                                                                                                                               Note: (same for left hand)
                                                                                                                                                                                         2. Move arrow rest to the left
                                                                                                                                                                                         3. Use heavier points
                                                                                                                                                                                                                                   2. Move arrow rest to the right
                                                                                                                                                                                                                                   3. Use lighter points
                                                                                                                                                                                         4. Use a lighter spined arrow             4. Use a stiffer spined arrow
      weighted cam is designed specifically for the Mathews Sportsman, a bow for the                                                                                   Nock end
                                                                                                                                                                       high                                    Nock end high                           Tip went thru here
      bowfisherman or upland bowhunter. With minimal let-off there is not the "bump"          Nock end
      associated with height let-off bows as you approach full draw and no real wall.         went low
                                                                                              thru here
                                                                                                                                           Tip went
                                                                                                                                           thru here
      Note: Because the Fin or Feather Cam fits everyone, there are only two cams-left        SOLUTION:
                                                                                                                                                                                     Tip went thru here                        Nock end ripped left
                                                                                                                                                                                        5. Use longer arrows if possible           5. Use shorter arrows if possible
            or right handed- and, therefore, there is no chart.                                 Nock End Ripped Low
                                                                                                                                                                                     (Opposite for left hand)
                                                                                                                                                                                                                                   6. Vanes or feathers may be striking
                                                                                                                                                                                                                                      arrow rest. Try a different
                                                                                                 1. Raise the nocking point
                                                                                                 2. Use a heavier arrow tip              NOTE: If lowering nocking point does not    Note: Feathers or vanes may be hitting           arrow rest.
                                                                                                 3. Use a more limber spined arrow       eliminate problem try a different kind of   arrow rest. Try a different arrow rest.
                                                                                                    Note: (same for left hand)           arrow rest.                                 (left hand only!)                         Note: (Opposite for left hand)

                                                                                                                               This is an example of a properly tuned bow.
                                                                                                                               Note that the point where the arrow tip went
                                                                                                                               through is centered in the middle of three very
                                                                                                                               comparable vane tears.
      6                                                                                                                                                                                                                                                                   11
’03 owner’s manual all        6/2/03    12:02 PM      Page 5

      Arrow selection...                                                                       StraightLine MaxCam2 ™
                                                                                               We designed this cam exclusively for the SQ2, Q2 and Q2XL. It works in
      Determining Proper Arrow Length                                                          conjunction with Mathews’ revolutionary Harmonic Damping System™ to reduce
      The first step in selecting your arrows is to determine your arrow length. This is       recoil vibration. Like the StraightLine MaxCam™, this perimeter-weighted cam
      determined by several factors, including arm length and full-draw anchor position.       gives you straight nock point travel, smooth shooting and great speed. Available in
      If you are using an overdraw, you can mark the arrow just in front of the rest. The      several draw length options.
      distance from your mark to the string groove in the arrow nock will be your correct
      arrow length. Your Mathews retailer can be an invaluable help in this process.              Draw Lengths with 70% Let-off          Right Hand                Left Hand
      Using the Easton Shaft Selection Chart               (see pages 12 & 13)                     SQ2/Q2            Q2XL
                                                                                                      30"              31"                 SL2AR                    SL2AL
      After you’ve determined your arrow length, find its corresponding measure in the
      length column. Move down this column until you reach the correct draw weight of
                                                                                                     29.5"            30.5"               SL2B.5R                  SL2B.5L
      your bow. The correct spine for your arrow is found where your draw length and                  29"              30"                 SL2BR                    SL2BL
      weight intersect. Use the “hard cam” category on the chart for a Mathews                       28.5"            29.5"               SL2C.5R                  SL2C.5L
      SoloCam bow.                                                                                    28"              29"                 SL2CR                    SL2CL
                                                                                                     27.5"            28.5"               SL2D.5R                  SL2D.5L
      String and cable lengths for each Mathews bow                                                   27"
      The Zebra ZS Twist bowstring is standard on all Mathews bows. It combines                       26"              27"                 SL2ER                    SL2EL
      bundles of low-stretch, multifilament strands counter-twisted to form a perfectly               25"              26"                 SL2FR                    SL2FL
      balanced bowstring that does not rotate as the bow is drawn. Your peep comes to
      perfect position every time – without the need for rubber tubing and other                      24"              25"                 SL2GR                    SL2GL
      alignment devices. Plus, peep installation is easier than ever. Following is a list of          23"              24"                 SL2HR                    SL2HL
      the string and cable lengths required for each Mathews model:

           Model                                 String Length            Cable Length         The Original MaxCam™
           LX                                        985/8"                   375/8"           The revolutionary perimeter-weighted cam that started it all, the Original MaxCam
                                                                                               is available on the Conquest 3, FX, and Ultra 2. It generates incredible arrow
           Mathews Legacy                            913/4"                   361/4"           speed while also remarkably reducing recoil, thanks to perimeter-weighting. The
           Icon                                     9713/16"                 395/8"            Original MaxCam™ is available with 65% and 80% let-off.
           SQ2                                       841/2"                  3311/16"
           SQ2 (291/2" OR 30" draw)                  855/8"                   333/4"                 Cam          Conquest 3        FX         Ultra 2    Let-off (%)   RH or LH
           Q2                                        901/4"                  361/2"
                                                                                                   Z-AAR-HL           32"          31"          30"           80           RH
           Q2 (291/2", 30" draw)                    915/16"                  365/8"
                                                                                                   Z-BBR-HL           31"          30"          29"           80           RH
           Q2XL                                      973/4"                  40 3/16"
                                                                                                   Z-CCR-HL           30"          29"          28"           80           RH
           Q2XL (301/2" or 31" draw)                 991/8"                   401/2"
                                                                                                   Z-DDR-HL           29"          28"          27"           80           RH
           Conquest 3                               1031/4"                  435/8""
                                                                                                   Z-EER-HL           28"          27"          26"           80           RH
           Conquest 3 (Mini Max)                    9715/16"                 423/4""
                                                                                                   Z-AAL-HL           32"          31"          30"           80           LH
           Ultra 2                                   931/8"                   387/8"
                                                                                                   Z-BBL-HL           31"          30"          29"           80           LH
           Ultra 2 (Mini Max)                         88"                     377/8"
                                                                                                   Z-CCL-HL           30"          29"          28"           80           LH
           Black Max 2                               927/8"                    37"
                                                                                                   Z-DDL-HL           29"          28"          27"           80           LH
           FX                                       901/16"                  371/4"
                                                                                                   Z-EEL-HL           28"          27"          26"           80           LH
           FX (Mini Max)                             833/4"                   357/8"
                                                                                                     Z-AAR            32"          31"          30"           65           RH
           Sportsman                                 901/16"                   37"
                                                                                                     Z-BBR            31"          30"          29"           65           RH
                                                                                                     Z-CCR            30"          29"          28"           65           RH
                                                                                                     Z-DDR            29"          28"          27"           65           RH
                                                                                                     Z-EER            28"          27"          26"           65           RH
                                                                                                     Z-AAL            32"          31"          30"           65           LH
                                                                                                     Z-BBL            31"          30"          29"           65           LH
                                                                                                     Z-CCL            30"          29"          28"           65           LH
                                                                                                     Z-DDL            29"          28"          27"           65           LH
                                                                                                     Z-EEL            28"          27"          26"           65           LH
      10                                                                                                                                                                             7
’03 owner’s manual all         6/2/03    12:02 PM     Page 6

       Mini MaxCam™
       Now shorter-draw-length shooters can get all the advantages of perimeter
       weighting. Available on Mathews FX, Ultra 2 and Conquest 3 models, this cam
                                                                                                  2003 Bow Specifications Chart
                                                                                                   Model          IBO         AMO         Cam(s)            Draw          Draw      Axle-       Brace       Riser  Physical         Let-
       accommodates draw lengths as short as 22" with peak draw weights down to 35                                Rating      Rating                        Length        Weight    to-Axle     Height      Length Weight           off
       pounds. The Mini MaxCam™ is available only with 65% let-off and has                                        (FPS)       (FPS)                                                 Length      (Approx.)               (Approx.)   (%)
                                                                                                                  (Approx.)   (Approx.)                                             (Approx.)
       approximately a 1/2" adjustment range. Putting a Mini MaxCam on a bow reduces the
       draw weight approximatly five pounds.                                                       LX*            315          238        High              25 - 30       40 - 70    35"          6 5/8"     24.5"      4.25 lbs.   80
       Note: The Mini MaxCam requires a different idler wheel and string/cable lengths.                                                   Performance       Half-Sizes
                                                                                                                  317          240        Cam               25.5 - 29.5                                                             65**

          Cam                  Ultra 2          FX     Conquest 3      Let-off (%)     RH or LH    Mathews        308          235        Legacy            24 - 30       40 - 70    34"          71/2"       25"       4.35 lbs.   70**
                                                                                                   Legacy*                                StraightLine      Half-Sizes
                                                                                                                                          MaxCam 3          27.5 - 29.5
          MINIMAX-DDR            27"            28"       29"                65          RH
          MINIMAX-EER            26"            27"       28"                65          RH        Icon*          300          230        Concentric        24 - 30       40 - 70    37"          75/8"       25"       4.45 lbs.   70**
                                                                                                                                          SoloCam           Half-Sizes
          MINIMAX-FFR            25"            26"       27"                65          RH                                                                 27.5 - 29.5

          MINIMAX-GGR            24"            25"       26"                65          RH        SQ2*           305          230        StraightLine      23 - 30       40 - 70    31"          81/2"     19 13/16"   3.7 lbs.    70**
          MINIMAX-HHR            23"            24"       25"                65          RH                                               MaxCam2™          Half-Sizes
                                                                                                                                                            26.5 - 29.5
          MINIMAX-IIR            22"            23"       24"                65          RH
                                                                                                   Q2*            308          235        StraightLine      23 - 30       40 - 70    34"          71/2"      23"         4 lbs.     70**
          MINIMAX-DDL            27"            28"       29"                65          LH                                               MaxCam2™          Half-Sizes
                                                                                                                                                            26.5 - 29.5
          MINIMAX-EEL            26"            27"       28"                65          LH
          MINIMAX-FFL            25"            26"       27"                65          LH        Q2XL*          308          235        StraightLine      24 - 31       40 - 70    38"          71/2"      27"        4.3 lbs.    70**
                                                                                                                                          MaxCam2™          Half-Sizes
          MINIMAX-GGL            24"            25"       26"                65          LH                                                                 27.5 - 30.5
          MINIMAX-HHL            23"            24"       25"                65          LH        Conquest 3*    310          236        MaxCam            28 - 32       40 - 70    41"           7"       271/8"      4.4 lbs.    80
          MINIMAX-IIL            22"            23"       24"                65          LH                                               Mini MaxCam       24 - 29                                                                 65**
                                                                                                                                          Super Soft        28 - 32                                                                 60**

       Super-Soft Cam™                                                                             Ultra 2*       320+         245        MaxCam            26 - 30       40 - 70    36"          61/8"     17 5/8"     3.7 lbs.    80
                                                                                                                                          Mini MaxCam       22 - 27                                                                 65**
       The Super-Soft Cam , designed especially for finger shooters, provides an
       extremely smooth draw and a release that rolls from the fingertips. This special            Black Max 2*   330+         252        Black MaxCam      25 - 30       40 - 70    36"          51/2"     1713/16"    3.5 lbs.    80
                                                                                                                  330+                    Black MaxCam      Half-Sizes                                                              65**
       MaxCam™ is available on the Conquest 3, Ultra 2 and FX and only with 60% let-off.                          340+                    Turbo MaxCam      25.5 - 29.5                                                             50**

                                                                                                   FX             308          235        MaxCam            27 - 31       40 - 70    34"          71/2"     163/8"      3.3 lbs.    80
            Cam         Conquest 3       Ultra 2        FX          Let-off (%)      RH or LH                                             Mini MaxCam       23 - 28                                                                 65**

           SS-AR           32"            30"          31"              60             RH          Sportsman      Adequate Adequate       Fin or Feather™   20 - 32       40 - 70    34"          71/2"     163/8"      3.3 lbs.    —
           SS-BR           31"            29"          30"              60             RH                                                 Cam

           SS-CR           30"            28"          29"              60             RH
                                                                                                  All Mathews bows come with a weight adjustment range of 10 lbs. (down). All have standard burger
           SS-DR           29"            27"          28"              60             RH         button, sight, and stabilizer holes. The cable slider on each model is a special nonsqueak Teflon® com-
           SS-ER           28"            26"          27"              60             RH         posite. The limbs are SlimlineTM laminated and come with an original owner lifetime warranty. The
           SS-AL           32"            30"          31"              60             LH         machined aluminum limb cups totally contain the limb butts and pivot with the limbs, so no matter
           SS-BL           31"            29"          30"              60             LH         what the draw weight, the limbs are always firmly contained within the cup. High inertia limb cups
                                                                                                  are also available at an additional charge.
           SS-CL           30"            28"          29"              60             LH
           SS-DL           29"            27"          28"              60             LH
           SS-EL           28"            26"          27"              60             LH         *Features Harmonic Damping System™

                                                                                                  **These cams are all officially
                                                                                                    Pope & Young Club legal

      8                                                                                                                                                                                                                                    9

To top