Docstoc

ANCHOR MODULES

Document Sample
ANCHOR MODULES Powered By Docstoc
					  ANCHOR MODULES
 ASSEMBLY INSTRUCTIONS




30',40' 60' WIDE SYSTEMS
              AND




                             (812) 867-0547 FAX



  PRODUCTION FACILITIES:                                        SALES OFFICES:
      Evansville, IN                                      1100 Burch Drive, P.O. Box 3477
      Bradenton, FL                                        Evansville, IN 47733-3477 USA


                                111111111111
                                Rapid Response

                                Satisfaction Since 1892
                           Se~.ce
                                                                                            MODS 993
            MODULE TENT PARTS LIST                                                                   MANPOWER
                                              I                    1                                  REQUIRED
                                                                             PIPE & FLANGES
                            2 PC CENTER POLE                             C
                                                                                                Three experienced
                                                                                 -+
                                                                        fzzz*' 0k-              installers should be able




u
                                                                                                to assemble a 30' wide
                 SIDE POLE WITH BASE PLATE U                                                    tent. Four for a 40' wide
                     AND TOP OVAL RING                                                          tent and five for a 60'
                                                                                                wide tent.
SECTION                                            o
                                                  *=                                             TOOLS REQUIRED
                 42" STEEL STAKE                  10" NAIL STAKE                 GUY ROPES
                                                                                                   Sledge Hammers1
                                                                                                      stake Driver
                           Center Side                                  10"                        2 Measuring Tapes
                           Poles Poles                                  Nails Section Flanges         Y "Wrench
                                                                                                       4

    30' Ends (Pair)          1       12                                  24                         INSPECT SlTE
                                                                                                      CAUTION:
    30' Middle               1       4                                       8
                                                                                                Consult local utility com-



                       11111
    30' Center              2        -            4        -       4                            pany, prior to installation.
    40' Ends (Pair)          1       12           14       1       14                           Prior to assembly be
                                                                                                sure to look around



1
    40' Middle
                                                                                                area for obstacles,
    40' Center                                                                                  pipes, wires, etc.
    60' Ends (Pair)         2        16           32               32                             LAYOUT & CHECK
                                                                                                Use parts list for a quick
1 60' Middle           1    2    1   4    1       8    1   -   1   8
                                                                                                I.D. and a check list to
    40' x 60' Center        3        -            8        -       8                            ensure that you have all
                                                                                                the parts.
* ANCHOR MODULES TOP & POLES SOLD AS PACKAGE.
    STAKES NOT INCLUDED.
          MEASURE LAYOUT
          Mark location of stakes, side poles and center poles.
          Proper placement of center and side poles is critical for proper tension of tent.
          See pages 4, 5 & 6 for tent layouts.

          LAYOUT AT SlTE
          Drive stakes vertically at points located.
          Spread drop cloths and unroll tent.
          Any objects with sharp projections
          which must remain on site under the
          tent should be padded and taped.

          NOTE: Match loop edges to hole edges
          of sections for lacing.
     LACING INSTRUCTIONS
With tent sections on ground, over-
lap center pole hole with grommet
side on top. At center pole locations
with overlapping holes, place pipe
through holes and attach flanges at
both ends.
Pipe flanges are furnished at
each laced center pole hole
location.




              CENTER POLE HOLES    -.Y
For 60' tent, lace from one center pole              SMALL FLAP
to the other.      .
                   .                        \
                                                \


Starting at center pole hole, push first
loop through corresponding grommet.
Continue lacing process and cover
lacing with protective flaps and snap
to rope a you move down tent section.
Tie off the last long lacing loop.
Push web loop through opening on
large snap and secure with locking
pin.

                                                        WEB LOOP

            SIDE POLES
Assemble side poles and place
 around perimeter of tent. Tie off last    LARGER END OF
                                           RING TOWARDS
 3' of guy ropes loosely to each stake.    INSIDE OF TENT
Start at side opposite wind. Snap guy
ropes and tent to side poles. Set up
side pole with base plate at marked
location. Secure with 10" nail stakes.
Bottom should be pointed inward
toward center of tent. Continue
around tent.
In two or three places, tie off cross
ropes to prevent rotation of tent during
assembly. Remove after assembly is                                 LF HITCH KNOT
complete.
                   RAISE CENTER POLES
                   Raise center poles nearest to wind
                   direction to approximate position.
                   One installer to guide center pole
                   pin through hole to prevent snagging
                   or tearing of fabric as pole is being
                   raised to position.
                   Tie off jump rope.
                   CAUTION: At this point, properly
                   stake all center poles to prevent
                   movement. Lash pole to two stakes.
                   (Not provided)


I
    #: \
    ,fi t,c:'b"         JUMP ROPE



                    TENSION SIDE POLES
                   Tighten guy ropes by hand.

                   Use furnished hoist first at lace line
                   and then other areas for proper
                   tension.

            USE CAUTION WHEN OPERATING HOIST
              Due to changes in climatic condi-
              tions, periodic inspection and adjust-
              ment should be made.

                   Protective covers recommended for
                   all stakes.



                                                                          IMPORTANT:
                       TAKE DOWN                            Check Guy Ropes periodically for tightness
                  USE EXTREME CAUTION                       and good condition.
                  REMOVING ALL POLES
                                                            Store tent in a cool, dry area. Never store
                   1.   Spread ground cover.
                                                            while wet or damp.
                   2.   Slant side poles inward.
                   3.   Remove center and side poles.
                   4.   Reverse installation steps.
POLE & STAKE LOCATIONS




                                    CENTER
                                               MIDDLE




                                                                    RADIUS FOR




NOTES:
                                                               -
                                                        SlDE POLE

                                                        23-2



  A. CENTER POLES (PIP. 5 PLACES)
  B. SlDE POLES
                                             ANCHOR MODULES - 40'
  C. GUY LINE STAKES
                                                         -T                                   23'2"


                                                                               EDGE OF TENT

                                                                                                7'
                                                                                                1,




                                       40' x 60'
                                       CENTER
                                                                38'0" RADIUS
                                                                                              65'0"
                                                                FOR STAKES
    GUY STAKE




                                                                                               v



                                       JOINING SECTION
     NOTES:                            NOT SHOWN
      A. CENTER POLES (TYP 7 PLACES)
      B. SIDE POLES
      C. GUY LINE STAKES
                                                         ANCHOR MODULES - 60'

i
                                   EVANSVILLE, INDIANA

    Thank you for purchasing an Anchor product. In return, we pledge Quality, Service
    and Craftsmanship and are available for any questions you may have or assistance
                                    you may need.

                                 PHONE NUMBER
                                       812-867-2421

                                    FAX NUMBER
                                       812-867-0547


 Anchor products are of superior design and operate best within the parameters of these
instructions. It is IMPERATIVE that the instructions be carefully read and COMPLETELY
  FOLLOWED. Please read installation instructions before the installation or removal of
       this product. Installation instructions are available at www.anchorinc.com.

                                           CAUTION


1. For each installation, the installer is solely responsible for evaluating the site and the
proper securing method determined. Some soils require different staking or securing than
that provided with the tent. Due to this variety of soil conditions, these are the manufac-
turer’s suggested sequence of installation procedures. Anchor’s responsibility is limited to
the construction of the tent. We are not responsible for methods that installers may
choose to secure the tent to the ground.

2. Inasmuch as the weather is unpredictable, good judgment and common sense must be
incorporated within installation guidelines. It is the responsibility of the tent installer/main-
tainer to determine the severity of the weather, proper time and method of installation
and/or erection and disassembly.

This product has been manufactured for use as a temporary structure. For the safety of
all occupants, evacuation is recommended if threatening weather occurs, or if there is any
doubt concerning the safe use of this product.

3. Proper safety equipment should be used at all times to insure a safe installation and
take down. We suggest a careful evaluation be made to determine safety equipment
needed, such as hard hats, steel-toe shoes, safety glasses and other as required.

4. Anchor stands behind its products in accordance with its standard Terms and
Conditions of sale. A copy of our Terms and Conditions of Sale can be obtained by con-
tacting Anchor at the telephone number and/or address on this document.
                                                                             28.2 11-01-02

				
DOCUMENT INFO
Shared By:
Categories:
Stats:
views:12
posted:7/9/2011
language:English
pages:8