Docstoc

NATIONAL INSTITUTE OF FASHION TECHNOLOGY_ HYDERABAD

Document Sample
NATIONAL INSTITUTE OF FASHION TECHNOLOGY_ HYDERABAD Powered By Docstoc
					         NATIONAL INSTITUTE OF FASHION TECHNOLOGY, HYDERABAD

                   FINANCIAL BID FOR GUEST HOUSE FURNITURE

 To be deposited in Separate sealed cover-II (subscribed as Financial Bid) in Purchase
        Department, NIFT, Hyderabad before 2.00 p.m. on or before 24.3.2011

For supply of Guest House Furniture structure given below as per the terms and conditions
mentioned in the tender document

                                                                          Rate per    Total
S. No.                       Particulars                         Qty.
                                                                            unit     Amount
          Cot for guest rooms
          Providing of cots for guest rooms with a
          dimensions of 6'0" x 6'6" in veneer finish with 18
          mm thick plywood frame work of size 75 mm x
          150 mm all around the bed and having a provision
          for mattress holding slot with necessary middle
          frame work and 12 mm plywood bottom in
  1                                                             8 nos.
          required design either with legs or with complete
          closure till the FFL. This includes finishing the
          entire bed externally with 4 mm thick veneer.
          Veneer shall be finished with necessary filling,
          sand papering, polishing till getting the finish
          followed by polyurethane spray and buffing, if
          required
          Bed back drops- 3000 mm x 1200 mm in
          leatherite finish
          Providing of bed back drop to the cot in guest
          rooms with a dimensions of 1200 mm (H) x 3000
          mm (W) with a depth of 100 mm in veneer finish
          and partly in leatherite finish. Paneling shall be
          done with 18 mm thick plywood with proper
  2       leveling and the frame shall be cladded with 12       8 nos.
          mm thick plywood finished partly with 4.0 mm
          thick veneer of any shade as approved and the
          remaining with leatherite finish as approved.
          Veneer shall be finished with necessary filling,
          sand papering, polishing till getting the finish
          followed by polyurethane spray and buffing, if
          required
  3       Side tables                                           16 nos.
          Coffee tables with two chairs
  4       Providing of coffee tables with two chairs in well    8 sets
          seasoned teak finish including upholstery
          Curtains
          Providing and fixing of fabric curtains stretched
                                                                1250
  5       in a modern style with necessary fixtures like SS
          pipes, end brackets, elite rings. Measurement shall    sft.
          be taken for the entire fabric used




(Full Signature of the Tenderer)
        Dressing Unit
        Providing and fixing of dressing unit in veneer
        finish and made out of 18 mm thick MR grade
        commercial hardwood plywood finished with 4.0
        mm thick veneer of any shade. Basically the
        dressing unit shall have a small cabinet with a
  6     dimension of 450 mm x 450 mm x 450 mm with           8 nos.
        two draws from FFL to till 500 mm level. 1500
        mm x 600 mirror will be provided over studs.
        Veneer shall be finished with necessary filling,
        sand papering, polishing till getting the finish
        followed by polyurethane spray and buffing, if
        required
        Study table
        Providing and fixing of study table in veneer
        finish and made out of 18 mm thick MR grade
        commercial hardwood plywood finished with 4.0
        mm thick veneer of any shade as approved study
        table dimensions will be 600 mm x 900 mm x 750
  7                                                          8 nos.
        mm and the top will be rested on a leg made out
        of 50 mm dia SS 304 grade round pipe with level
        adjustor. Veneer shall be finished with necessary
        filling, sand papering, polishing till getting the
        finish followed by polyurethane spray and
        buffing, if required
        Light Fixtures
        Supply, Installation and testing of the required
  8     light fittings of approved make and design.          32 nos.
        including cabling, switches and necessary
        accessories

Note: Prices quoted should be inclusive of all taxes, Insurance, Transportation & Installation at
site




(Full Signature of the Tenderer)