Docstoc

Plastic Form Liners Stone Patterns

Document Sample
Plastic Form Liners  Stone Patterns Powered By Docstoc
					 BY   D AY T O N   SUPERIOR




Plastic Form Liners — Stone Patterns
 14¾” Coursing Random Ashlar Stone
 Aged Ashlar Stone
 Austin Ashlar Stone
 Buffalo Dry Stack
 Chiseled Ashlar Stone
 Colonial Dry Stack
 Fractured Concrete
 Fractured Granite
 Grande Flagstone
 Granite Stone
 Hill Country Flagstone
 Large Dry Stack Stone
 Mission Ashlar Stone
 Oklahoma Native Stone
 Old Ashlar Stone
 Pea Gravel
 Phoenix Limestone
 Random Fieldstone Large
 Rough Ashlar Stone
 Round Stone
 Rugged Flagstone
 Running Bond Ashlar Stone
 San Antonio Dry Stack
 San Antonio Flagstone
 Sedona Stone
 Shallow Fieldstone
 Small Crushed Stone
 Southwest Ashlar Stone
 Southwest Ashlar Stones Large
 Standard Dry Stack
 Texas Chiseled Limestone
 Texas Fossilized Limestone
 Trinity Ashlar Stone
 Vertical Flagstone
 Weathered Rock




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
BY       D AY T O N    SUPERIOR




                                        14¾” Coursing Random Ashlar
                      1
                 3'-8 4 "                                        5
                                                                18 "             1"


      3
 1'-2 4 "              3
                  1'-2 4 "            3
                                 1'-2 4 "




                                        2'
                                                            General Information:
                      3'                                    The Styrene and ABS form liners are an economical solution for provid-
                                                            ing architectural pattern reproductions. The Styrene plastic form liner
                                                            is a perfect alternative for single use applications which costs less than
                                                            other liners. The ABS plastic form liner exhibits good impact resistance
                                                            and excellent overall performance. Its reuse factor is 10, subject to pattern
1'-11"                                                      configuration, proper handling and jobsite configurations.
                                                            Care and Handling:
                                                            To protect from thermal deformation, form liners should not be exposed
                                                            to temperatures above 140°F (60°C). To avoid discoloration from sunlight
 1"                             4'-2"                       exposure, form liners should be covered with a tarpaulin when not in use.
                 2'-3"
                                                            This helps prolong the life of the material and keeps the material clean.

          1"                                 9'-7"          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                            70°F. Keep away from steam, acids, and certain fuels.
                                                            Application:
                                                            Refer to Form Liner Application Guide for installation methods. For further
                                                            information, please contact a Symons representative at 800-800-7652, or
                                                            e-mail info@daytonsuperior.com.
                 2'-1"
5'-6"
                                                                             Styrene                               ABS
                                                                         Product Code #                    Product Code #
                                                                             F70622                              F70650
                                3'-3"
                                                                              Uses                                Uses

                 2'                                                             1                                Up to 10
                                                                        Material Thickness               Material Thickness
                                                                               .150                               .150
                                                                       Standard Dimensions              Standard Dimensions
                                                                          9’7" x 3’8-1/4"                   9’7" x 3’8-1/4"
                                                                              Color                               Color
                                                                              White                               Gray




               No Photo Available




                             2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                   www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                               Aged Ashlar Stone
                           4'
                                                                                   3                     3/4" Nominal
                                                                                   4"




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                       exposure, form liners should be covered with a tarpaulin when not in use.
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                       Styrene                                   ABS
                                                                   Product Code #                        Product Code #
                                                                        F70621                                 F70649
                                                                         Uses                                   Uses
                                                                           1                                   Up to 10
                                                                  Material Thickness                   Material Thickness
                                                                         .090                                   .110
                                                                Standard Dimensions                   Standard Dimensions
                                                                        10’ x 4’                               10’ x 4’
                                                                         Color                                  Color
                                                                        White                                   Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                      Austin Ashlar Stone
                      4'                                                                                              3
                                                                                                                     1 "
                                                                                                                     4
                                                                          3
                                                                          4
                                                                            "

                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                   F70613                                 F70641
                                                                    Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .150                                   .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                               10’ x 4’
                                                                    Color                                  Color
                                                                   White                                   Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
BY   D AY T O N    SUPERIOR




                                                                              Buffalo Dry Stack
              4’
                                                                                       Varies
                                                      1“




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                    10’              To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F947056                                 F940025
                                                                    Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .090                                   .110
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                               10’ x 4’
                                                                    Color                                  Color
                                                                   White                                   Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                            Chiseled Ashlar Stone
                                                             3/4" Typical
                          4'                                  1
                                                             12 "




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                       exposure, form liners should be covered with a tarpaulin when not in use.
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                               Styrene                           ABS
                                                                            Product Code #               Product Code #
                                                                               F70617                          F70645
                                                                                Uses                            Uses
                                                                                  1                            Up to 10
                                                                      Material Thickness               Material Thickness
                                                                                 .150                           .150
                                                                    Standard Dimensions               Standard Dimensions
                                                                               10’ x 4’                        10’ x 4’
                                                                                Color                           Color
                                                                                White                           Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                              Colonial Dry Stack
                     4'                                                    3
                                                                          18 "




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170593                                F3170510
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                          Fractured Concrete
                     4'
                                                                           1/2"Nominal




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight

10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170583                                F3170508
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .090                                    .110
                                                           Standard Dimensions                   Standard Dimensions
                                                                   4’ x 10’                                4’ x 10’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                              Fractured Granite
                      4'
                                                           ¾"




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                   Styrene                                  ABS
                                                                Product Code #                      Product Code #
                                                                   F947053                                F940022
                                                                    Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                     .090                                  .110
                                                           Standard Dimensions                   Standard Dimensions
                                                                   4’ x 10’                               4’ x 10’
                                                                    Color                                  Color
                                                                    White                                  Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
  BY   D AY T O N   SUPERIOR




                                                                               Grande Flagstone
                       4’

                                                                             No Profile Drawing Available




                                                      General Information:
                                                      The Styrene and ABS form liners are an economical solution for provid-
                                                      ing architectural pattern reproductions. The Styrene plastic form liner
                                                      is a perfect alternative for single use applications which costs less than
                                                      other liners. The ABS plastic form liner exhibits good impact resistance
                                                      and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                      configuration, proper handling and jobsite configurations.
                                                      Care and Handling:
                                                      To protect from thermal deformation, form liners should not be exposed
                                                      to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                      exposure, form liners should be covered with a tarpaulin when not in use.
10’                                                   This helps prolong the life of the material and keeps the material clean.
                                                      Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                      70°F. Keep away from steam, acids, and certain fuels.
                                                      Application:
                                                      Refer to Form Liner Application Guide for installation methods. For further
                                                      information, please contact a Symons representative at 800-800-7652, or
                                                      e-mail info@daytonsuperior.com.


                                                                   Styrene                                   ABS
                                                               Product Code #                        Product Code #
                                                                    F70612                                 F70640
                                                                     Uses                                   Uses
                                                                       1                                   Up to 10
                                                              Material Thickness                   Material Thickness
                                                                     .090                                   .110
                                                            Standard Dimensions                   Standard Dimensions
                                                                    10’ x 4’                               10’ x 4’
                                                                     Color                                  Color
                                                                    White                                   Gray




           No Photo Available




                       2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                             www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                                              Granite Stone
                           4'                                                  3/4"




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                          exposure, form liners should be covered with a tarpaulin when not in use.
10'                                                       This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                       Styrene                                   ABS
                                                                   Product Code #                        Product Code #
                                                                        F70623                                 F70651
                                                                         Uses                                   Uses
                                                                           1                                   Up to 10
                                                                  Material Thickness                   Material Thickness
                                                                         .090                                   .110
                                                                Standard Dimensions                   Standard Dimensions
                                                                        10’ x 4’                               10’ x 4’
                                                                         Color                                  Color
                                                                        White                                   Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                              Hill Country Flagstone
                    4'                                      Varies



                                                                                   2" max.




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                     Styrene                                ABS
                                                              Product Code #                        Product Code #
                                                                     F3170594                             F3170511
                                                                       Uses                                 Uses
                                                                         1                                Up to 10
                                                             Material Thickness                   Material Thickness
                                                                       .150                                 .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                      10’ x 4’                             10’ x 4’
                                                                      Color                                Color
                                                                      White                                 Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                              Large Dry Stack Stone
                     4'
                                                                          11"
                                                                           4




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170582                                F3170507
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
BY   D AY T O N   SUPERIOR




                                                                Mission Ashlar Stone

                                                                           No Profile Drawing Available




                                                    General Information:
                                                    The Styrene and ABS form liners are an economical solution for provid-
                                                    ing architectural pattern reproductions. The Styrene plastic form liner
                                                    is a perfect alternative for single use applications which costs less than
                                                    other liners. The ABS plastic form liner exhibits good impact resistance
                                                    and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                    configuration, proper handling and jobsite configurations.
                                                    Care and Handling:
                                                    To protect from thermal deformation, form liners should not be exposed
          No Form Liner                             to temperatures above 140°F (60°C). To avoid discoloration from sunlight
      Face Drawing Available                        exposure, form liners should be covered with a tarpaulin when not in use.
                                                    This helps prolong the life of the material and keeps the material clean.
                                                    Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                    70°F. Keep away from steam, acids, and certain fuels.
                                                    Application:
                                                    Refer to Form Liner Application Guide for installation methods. For further
                                                    information, please contact a Symons representative at 800-800-7652, or
                                                    e-mail info@daytonsuperior.com.


                                                                 Styrene                                   ABS
                                                             Product Code #                        Product Code #
                                                                  F70615                                 F70643
                                                                   Uses                                   Uses
                                                                     1                                   Up to 10
                                                            Material Thickness                   Material Thickness
                                                                   .150                                   .150
                                                          Standard Dimensions                   Standard Dimensions
                                                                  10’ x 4’                               10’ x 4’
                                                                   Color                                  Color
                                                                  White                                   Gray




         No Photo Available




                     2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                           www.symons.com u info@symons.com
BY   D AY T O N   SUPERIOR




                                                            Oklahoma Native Stone
              4’                                                                           Liner to have
                                                                                           approximately a    1 "
                                                  1/4" - 1/2" Perimeter Mortar Joint                           16
                                                                                           radius at joints         1/2" - 1" Mortar Joints


                                                                        1/4" - 1/2"




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                    10’              To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                              Styrene                                                         ABS
                                                                      Product Code #                                             Product Code #
                                                                             F947037                                                    F940006
                                                                                 Uses                                                         Uses
                                                                                       1                                                Up to 10
                                                                    Material Thickness                                        Material Thickness
                                                                                 .090                                                         .110
                                                                 Standard Dimensions                                        Standard Dimensions
                                                                              10’ x 4’                                                   10’ x 4’
                                                                                Color                                                         Color
                                                                                White                                                         Gray




                     2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                           www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                               Old Ashlar Stone
                      4'                                                                    Mortar Joint Varies

                                                                  1-1/4"Max.




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                    ABS
                                                              Product Code #                          Product Code #
                                                                   F30429                                  F30427
                                                                    Uses                                     Uses
                                                                      1                                    Up to 10
                                                             Material Thickness                     Material Thickness
                                                                    .090                                     .110
                                                           Standard Dimensions                    Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                    Color
                                                                   White                                     Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
BY   D AY T O N   SUPERIOR




                                                                                                   Pea Gravel

                                                                           No Profile Drawing Available




                                                    General Information:
                                                    The Styrene and ABS form liners are an economical solution for provid-
                                                    ing architectural pattern reproductions. The Styrene plastic form liner
                                                    is a perfect alternative for single use applications which costs less than
                                                    other liners. The ABS plastic form liner exhibits good impact resistance
                                                    and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                    configuration, proper handling and jobsite configurations.
                                                    Care and Handling:
                                                    To protect from thermal deformation, form liners should not be exposed
          No Form Liner                             to temperatures above 140°F (60°C). To avoid discoloration from sunlight
      Face Drawing Available                        exposure, form liners should be covered with a tarpaulin when not in use.
                                                    This helps prolong the life of the material and keeps the material clean.
                                                    Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                    70°F. Keep away from steam, acids, and certain fuels.
                                                    Application:
                                                    Refer to Form Liner Application Guide for installation methods. For further
                                                    information, please contact a Symons representative at 800-800-7652, or
                                                    e-mail info@daytonsuperior.com.


                                                                 Styrene                                   ABS
                                                             Product Code #                        Product Code #
                                                                  F70609                                 F70637
                                                                   Uses                                   Uses
                                                                     1                                   Up to 10
                                                            Material Thickness                   Material Thickness
                                                                   .070                                   .070
                                                          Standard Dimensions                   Standard Dimensions
                                                                  10’ x 4’                               10’ x 4’
                                                                   Color                                  Color
                                                                  White                                   Gray




         No Photo Available




                     2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                           www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                                   Phoenix Limestone
                            4'
                                                                1




                                                              General Information:
                                                              The Styrene and ABS form liners are an economical solution for provid-
                                                              ing architectural pattern reproductions. The Styrene plastic form liner
                                                              is a perfect alternative for single use applications which costs less than
                    PATTERN DIRECTION




                                                              other liners. The ABS plastic form liner exhibits good impact resistance
                                                              and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                              configuration, proper handling and jobsite configurations.
                                                              Care and Handling:
                                                              To protect from thermal deformation, form liners should not be exposed
10'                                                           to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                              exposure, form liners should be covered with a tarpaulin when not in use.
                                                              This helps prolong the life of the material and keeps the material clean.
                                                              Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                              70°F. Keep away from steam, acids, and certain fuels.
                                                              Application:
                                                              Refer to Form Liner Application Guide for installation methods. For further
                                                              information, please contact a Symons representative at 800-800-7652, or
                                                              e-mail info@daytonsuperior.com.


                                                                           Styrene                                   ABS
                                                                       Product Code #                        Product Code #
                                                                            F70658                                 F70659
                                                                             Uses                                   Uses
                                                                               1                                   Up to 10
                                                                      Material Thickness                   Material Thickness
                                                                             .090                                   .110
                                                                    Standard Dimensions                   Standard Dimensions
                                                                            4’ x 10’                               4’ x 10’
                                                                             Color                                  Color
                                                                            White                                   Gray




                               2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                     www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                   Random Fieldstone Large
                      4'                                                              3/4 " - 1.5"


                                                                               2"




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                    ABS
                                                              Product Code #                           Product Code #
                                                                   F70334                                  F70274
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                       Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                       Standard Dimensions
                                                                   4’ x 10’                                4’ x 10’
                                                                    Color                                   Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
  BY   D AY T O N   SUPERIOR




                                                                         Rough Ashlar Stone
                       4'                            3"                                              3
                                                                                  10°
                                                     8                                               4"
                                                           1
                                                          12 "




                                                      General Information:
                                                      The Styrene and ABS form liners are an economical solution for provid-
                                                      ing architectural pattern reproductions. The Styrene plastic form liner
                                                      is a perfect alternative for single use applications which costs less than
                                                      other liners. The ABS plastic form liner exhibits good impact resistance
                                                      and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                      configuration, proper handling and jobsite configurations.
                                                      Care and Handling:
                                                      To protect from thermal deformation, form liners should not be exposed
                                                      to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                      exposure, form liners should be covered with a tarpaulin when not in use.
                                                      This helps prolong the life of the material and keeps the material clean.
10'
                                                      Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                      70°F. Keep away from steam, acids, and certain fuels.
                                                      Application:
                                                      Refer to Form Liner Application Guide for installation methods. For further
                                                      information, please contact a Symons representative at 800-800-7652, or
                                                      e-mail info@daytonsuperior.com.


                                                                       Styrene                               ABS
                                                                   Product Code #                    Product Code #
                                                                       F70620                              F70648
                                                                        Uses                                Uses
                                                                          1                                Up to 10
                                                                  Material Thickness               Material Thickness
                                                                        .150                                .150
                                                                 Standard Dimensions              Standard Dimensions
                                                                       10’ x 4’                            10’ x 4’
                                                                        Color                               Color
                                                                        White                               Gray




           No Photo Available




                       2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                             www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                                            Round Stone
                     4'                                             Typical Stone 1" Diameter
                                                3"
                                                8




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                   F30722                                 F30251
                                                                    Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .070                                   .070
                                                           Standard Dimensions                   Standard Dimensions
                                                                   4’ x 10’                               4’ x 10’
                                                                    Color                                  Color
                                                                   White                                   Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                              Rugged Flagstone
                     4'                                              3
                                                                    18 "
                                                                                                 Varies




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170575                                F3170500
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY    D AY T O N   SUPERIOR




                                             Running Bond Ashlar Stone
         1'                                              3
                                                         8"
                                                                                           1
                                                                                         114 "                          3"
                          3"                                                                                            4

                          4                                            1
                                                                      12"



                           1
                         114"
                                                      General Information:
           1
      1'-114 "
                                                      The Styrene and ABS form liners are an economical solution for provid-
                                                      ing architectural pattern reproductions. The Styrene plastic form liner
                                                      is a perfect alternative for single use applications which costs less than
                                                      other liners. The ABS plastic form liner exhibits good impact resistance
                                                      and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                      configuration, proper handling and jobsite configurations.
      3"                                              Care and Handling:
      4                                        9'     To protect from thermal deformation, form liners should not be exposed
                                                      to temperatures above 140°F (60°C). To avoid discoloration from sunlight
8'                                                    exposure, form liners should be covered with a tarpaulin when not in use.
                                                      This helps prolong the life of the material and keeps the material clean.
                                                      Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                      70°F. Keep away from steam, acids, and certain fuels.
                                                      Application:
                                                      Refer to Form Liner Application Guide for installation methods. For further
                                                      information, please contact a Symons representative at 800-800-7652, or
                                                      e-mail info@daytonsuperior.com.


                                                                    Styrene                                  ABS
                                                                Product Code #                       Product Code #
                                                                    F70340                                 F70342
                                                                     Uses                                   Uses
                                                                       1                                   Up to 10
                                                               Material Thickness                  Material Thickness
                                                                     .150                                   .150
                                                              Standard Dimensions                 Standard Dimensions
                                                                     9’ x 4’                                9’ x 4’
                                                                     Color                                  Color
                                                                     White                                  Gray




                       2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                             www.symons.com u info@symons.com
BY   D AY T O N   SUPERIOR




                                                           San Antonio Dry Stack

                                                                           No Profile Drawing Available




                                                    General Information:
                                                    The Styrene and ABS form liners are an economical solution for provid-
                                                    ing architectural pattern reproductions. The Styrene plastic form liner
                                                    is a perfect alternative for single use applications which costs less than
                                                    other liners. The ABS plastic form liner exhibits good impact resistance
                                                    and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                    configuration, proper handling and jobsite configurations.
                                                    Care and Handling:
                                                    To protect from thermal deformation, form liners should not be exposed
          No Form Liner                             to temperatures above 140°F (60°C). To avoid discoloration from sunlight
      Face Drawing Available                        exposure, form liners should be covered with a tarpaulin when not in use.
                                                    This helps prolong the life of the material and keeps the material clean.
                                                    Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                    70°F. Keep away from steam, acids, and certain fuels.
                                                    Application:
                                                    Refer to Form Liner Application Guide for installation methods. For further
                                                    information, please contact a Symons representative at 800-800-7652, or
                                                    e-mail info@daytonsuperior.com.


                                                                 Styrene                                   ABS
                                                             Product Code #                        Product Code #
                                                                  F70619                                 F70647
                                                                   Uses                                   Uses
                                                                     1                                   Up to 10
                                                            Material Thickness                   Material Thickness
                                                                   .090                                   .110
                                                          Standard Dimensions                   Standard Dimensions
                                                                  10’ x 4’                               10’ x 4’
                                                                   Color                                  Color
                                                                  White                                   Gray




         No Photo Available




                     2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                           www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                 San Antonio Flagstone
                           4'                                                  1
                                                                               4"




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                       exposure, form liners should be covered with a tarpaulin when not in use.
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                       Styrene                                   ABS
                                                                   Product Code #                        Product Code #
                                                                        F70611                                 F70639
                                                                         Uses                                   Uses
                                                                           1                                   Up to 10
                                                                  Material Thickness                   Material Thickness
                                                                         .070                                   .070
                                                                Standard Dimensions                   Standard Dimensions
                                                                        10’ x 4’                               10’ x 4’
                                                                         Color                                  Color
                                                                        White                                   Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                                              Sedona Stone
                          4'                                                       Varies


                                                                                                 1
                                                                                                12 "




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                       exposure, form liners should be covered with a tarpaulin when not in use.
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                       Styrene                                   ABS
                                                                   Product Code #                        Product Code #
                                                                        F70618                                 F70648
                                                                         Uses                                   Uses
                                                                           1                                   Up to 10
                                                                  Material Thickness                    Material Thickness
                                                                         .150                                   .150
                                                                Standard Dimensions                    Standard Dimensions
                                                                        10’ x 4’                               10’ x 4’
                                                                         Color                                  Color
                                                                        White                                   Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                           Shallow Fieldstone
                      4'                                                                 5"
                                                                                         8




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170576                                F3170501
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .090                                    .110
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                  Small Crushed Stone
                    4'                                     1/4"




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
10'                                                  To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                   F30721                                 F30250
                                                                    Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .070                                   .070
                                                           Standard Dimensions                   Standard Dimensions
                                                                   4’ x 10’                               4’ x 10’
                                                                    Color                                  Color
                                                                   White                                   Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                       Southwest Ashlar Stone
                    4'                                                                3/4" Nominal

                                                                11/2"Max.




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
10'                                                  to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                    ABS
                                                              Product Code #                           Product Code #
                                                                   F30430                                  F30428
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                       Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                       Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                   Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                        Southwest Ashlar Stone Large
                           4'
                                                                       3/4" Typical

                                                                1
                                                               12 "




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                          exposure, form liners should be covered with a tarpaulin when not in use.
10'
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                                      Styrene                    ABS
                                                                               Product Code #            Product Code #
                                                                                      F70625                   F70653
                                                                                       Uses                     Uses
                                                                                         1                     Up to 10
                                                                        Material Thickness             Material Thickness
                                                                                       .150                     .150
                                                                      Standard Dimensions             Standard Dimensions
                                                                                      10’ x 4’                 10’ x 4’
                                                                                       Color                    Color
                                                                                      White                     Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                          Standard Dry Stack
                      4'                                               11 "
                                                                        4




                                                     General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
                                                     To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                  exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                                     Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                  F3170578                                F3170503
                                                                    Uses                                    Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .150                                    .150
                                                           Standard Dimensions                   Standard Dimensions
                                                                   10’ x 4’                                10’ x 4’
                                                                    Color                                  Color
                                                                   White                                    Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
BY   D AY T O N   SUPERIOR




                                                    Texas Chiseled Limestone

                                                                           No Profile Drawing Available




                                                    General Information:
                                                    The Styrene and ABS form liners are an economical solution for provid-
                                                    ing architectural pattern reproductions. The Styrene plastic form liner
                                                    is a perfect alternative for single use applications which costs less than
                                                    other liners. The ABS plastic form liner exhibits good impact resistance
                                                    and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                    configuration, proper handling and jobsite configurations.
                                                    Care and Handling:
                                                    To protect from thermal deformation, form liners should not be exposed
          No Form Liner                             to temperatures above 140°F (60°C). To avoid discoloration from sunlight
      Face Drawing Available                        exposure, form liners should be covered with a tarpaulin when not in use.
                                                    This helps prolong the life of the material and keeps the material clean.
                                                    Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                    70°F. Keep away from steam, acids, and certain fuels.
                                                    Application:
                                                    Refer to Form Liner Application Guide for installation methods. For further
                                                    information, please contact a Symons representative at 800-800-7652, or
                                                    e-mail info@daytonsuperior.com.


                                                                 Styrene                                   ABS
                                                             Product Code #                        Product Code #
                                                                  F70616                                 F70644
                                                                   Uses                                   Uses
                                                                     1                                   Up to 10
                                                            Material Thickness                   Material Thickness
                                                                   .150                                   .150
                                                          Standard Dimensions                   Standard Dimensions
                                                              9’11" x 3’7-1/2"                     9’11" x 3’7-1/2"
                                                                   Color                                  Color
                                                                  White                                   Gray




         No Photo Available




                     2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                           www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                       Texas Fossilized Limestone
                          4'                                   3"
                                                               8




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                          exposure, form liners should be covered with a tarpaulin when not in use.
10'
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                          Styrene                                ABS
                                                                      Product Code #                     Product Code #
                                                                          F70610                               F70638
                                                                           Uses                                 Uses
                                                                             1                                 Up to 10
                                                                     Material Thickness                Material Thickness
                                                                           .070                                 .070
                                                                    Standard Dimensions               Standard Dimensions
                                                                          10’ x 4’                             10’ x 4’
                                                                           Color                                Color
                                                                           White                                Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com
  BY   D AY T O N   SUPERIOR




                                                                        Trinity Ashlar Stone
                       4'                                                      Varies


                                                                                             1
                                                                                            12 "




                                                      General Information:
                                                      The Styrene and ABS form liners are an economical solution for provid-
                                                      ing architectural pattern reproductions. The Styrene plastic form liner
                                                      is a perfect alternative for single use applications which costs less than
                                                      other liners. The ABS plastic form liner exhibits good impact resistance
                                                      and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                      configuration, proper handling and jobsite configurations.
                                                      Care and Handling:
                                                      To protect from thermal deformation, form liners should not be exposed
                                                      to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                      exposure, form liners should be covered with a tarpaulin when not in use.
10'                                                   This helps prolong the life of the material and keeps the material clean.
                                                      Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                      70°F. Keep away from steam, acids, and certain fuels.
                                                      Application:
                                                      Refer to Form Liner Application Guide for installation methods. For further
                                                      information, please contact a Symons representative at 800-800-7652, or
                                                      e-mail info@daytonsuperior.com.


                                                                   Styrene                                   ABS
                                                               Product Code #                        Product Code #
                                                                    F70614                                 F70642
                                                                     Uses                                   Uses
                                                                       1                                   Up to 10
                                                              Material Thickness                    Material Thickness
                                                                     .150                                   .150
                                                            Standard Dimensions                    Standard Dimensions
                                                                    10’ x 4’                               10’ x 4’
                                                                     Color                                  Color
                                                                    White                                   Gray




           No Photo Available




                       2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                             www.symons.com u info@symons.com
 BY   D AY T O N   SUPERIOR




                                                                             Vertical Flagstone
                    4'
                                                      3"
                                                      8




                                         4'          General Information:
                                                     The Styrene and ABS form liners are an economical solution for provid-
                                                     ing architectural pattern reproductions. The Styrene plastic form liner
                                                     is a perfect alternative for single use applications which costs less than
                                                     other liners. The ABS plastic form liner exhibits good impact resistance
                                                     and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                     configuration, proper handling and jobsite configurations.
                                                     Care and Handling:
9'                                                   To protect from thermal deformation, form liners should not be exposed
                                                     to temperatures above 140°F (60°C). To avoid discoloration from sunlight
                                                     exposure, form liners should be covered with a tarpaulin when not in use.
                                                     This helps prolong the life of the material and keeps the material clean.
                                                     Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                     70°F. Keep away from steam, acids, and certain fuels.
                                         5'          Application:
                                                     Refer to Form Liner Application Guide for installation methods. For further
                                                     information, please contact a Symons representative at 800-800-7652, or
                                                     e-mail info@daytonsuperior.com.


                                                                  Styrene                                   ABS
                                                              Product Code #                        Product Code #
                                                                   F70599                                 F70516
          2'                                                        Uses                                   Uses
                                                                      1                                   Up to 10
                                                             Material Thickness                   Material Thickness
                                                                    .090                                   .110
                                                           Standard Dimensions                   Standard Dimensions
                                                                   4’ x 9’                                 4’ x 9’
                                                                    Color                                  Color
                                                                   White                                   Gray




                      2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                            www.symons.com u info@symons.com
      BY   D AY T O N   SUPERIOR




                                                                                       Weathered Rock
                           4'
                                                                                     2"




                                                          General Information:
                                                          The Styrene and ABS form liners are an economical solution for provid-
                                                          ing architectural pattern reproductions. The Styrene plastic form liner
                                                          is a perfect alternative for single use applications which costs less than
                                                          other liners. The ABS plastic form liner exhibits good impact resistance
                                                          and excellent overall performance. Its reuse factor is 10, subject to pattern
                                                          configuration, proper handling and jobsite configurations.
                                                          Care and Handling:
                                                          To protect from thermal deformation, form liners should not be exposed
                                                          to temperatures above 140°F (60°C). To avoid discoloration from sunlight
10'                                                       exposure, form liners should be covered with a tarpaulin when not in use.
                                                          This helps prolong the life of the material and keeps the material clean.
                                                          Form Liners are subject to thermal expansion and contraction +/- 1∕8” @
                                                          70°F. Keep away from steam, acids, and certain fuels.
                                                          Application:
                                                          Refer to Form Liner Application Guide for installation methods. For further
                                                          information, please contact a Symons representative at 800-800-7652, or
                                                          e-mail info@daytonsuperior.com.


                                                                       Styrene                                   ABS
                                                                   Product Code #                        Product Code #
                                                                        F70624                                 F70652
                                                                         Uses                                   Uses
                                                                           1                                   Up to 10
                                                                  Material Thickness                   Material Thickness
                                                                         .150                                   .150
                                                                Standard Dimensions                   Standard Dimensions
                                                                        10’ x 4’                               10’ x 4’
                                                                         Color                                  Color
                                                                        White                                   Gray




               No Photo Available




                           2400 Arthur Avenue Elk Grove Village, IL 60007 u 847-298-3200 u Fax: 847-635-9287
                                                 www.symons.com u info@symons.com

				
DOCUMENT INFO