article-5468

							Aquarium Salt Water - Advice On Changing It
Aquarium salt water will need to be changed at some point by you. Yes the filters in the filtration system do work to help remove most of the waste
that accumulates in an aquarium salt water tank, but they cannot remove it all.


The buildup of any waste material in an aquarium could not only turn the water cloudy or yellow but also it will help with the production of algae in the
tanks salt water. This build up can lead to problems affecting the growth of the fish and corals (if you have any) in the aquarium and this may well lead
to them become ill as it could cause them to become stressed. The one question that you should therefore be asking yourself is "When should I be
changing the salt water in my aquarium, rather than should I change it?"


When Is The Right Time For Changing Your Aquarium Salt Water?


Ideally it is best that you don't decide to change the aquarium salt water in the tank for several months in order to provide the right kind of environment
for your fish and marine life. Often when people do decide to change their aquarium salt water they tend to remove all the fish, invertebrates, plants
and coral from the tank and replace the water within completely. The problem is that this can actually lead to it doing more harm to the marine life that
lives in the tank already than good.


The best way for you to change aquarium salt water in your tropical fish tank is to just remove a small amount regularly, whilst allowing the saltwater
fish, invertebrates and corals of the reef to remain where they are. When removing aquarium salt water work on only remove about 1/3 of the total
capacity in the tank and then replacing with the same amount.


Changing The Aquarium Salt Water In Your Tank - Steps You Need To Take


1. Before you do anything else the first thing that you need to do is make sure that you turn off and then unplug the filtration system and heater pumps
that you have in your aquarium (but don't remove them). If left running without enough aquarium salt water in the tank then the chances of them
overheating are greatly increased. Plus as you replace the water in the aquarium and you leave on the heater pump then this may well result in the
glass in the tank cracking. Remember just how much money you spent on buying the tank in the first place and how much it is going to cost you to
replace it.


2. Next you need to get your aquarium scraper or scrubber in order to help remove the buildup of waste materials and algae on the sides of the tank
glass inside. When you are using these kind of aquarium salt water tank accessories make sure that you do so very gently and slowly to avoid
causing any stress or panic to the fish and other marine life in the tank.


3. After scrapping the insides of the tank glass you now need to remove any plants you have in the aquarium salt water and from these remove any
parts which are dead or dying. Then once you have removed the plants you can spend time stirring up the gravel to help bring any waste deposits to
the surface, but do so carefully as some species of salt water fish like to bury inside it. If you can put a large amount of the gravel towards the back of
the tank and then leave the rest where it is so that the waste deposits can then settle on top of it.


4. After moving the gravel around you are now ready to siphon off some of the old aquarium salt water in order to replace it with fresh. Remember
you should only ever remove about one third of the tanks water when changing it at any one time. The best way to remove the aquarium salt water is
using a specialist aquarium siphon product. Not only can it remove the old water easily but also when used correctly can help to remove the waste
that has accumulated in the aquarium salt water also.


5. When replacing the old water with new water use water that has the right chemical composition rather than freshwater. You can either let the water
you are going to be adding stand for a number of days or else before adding mixing in some salt mix product. At all times you should be adding
specialist aquarium salt to the water and not sea salt. Also it is crucial that the temperature of the aquarium salt water which you are going to be
putting in the tank is no less than 2 degrees Fahrenheit cooler than the temperature of the aquarium salt water already in the tank. Sometimes you
may well find that you need to add some more aquarium salt to the water to bring it up to the correct chemical composition that the fish and marine life
in the tank find comfortable.


The last thing that you need to do before you actually plug the filtration system and heater back in and turn them on after changing the aquarium salt
water is clean the cover and the glass on the outside.


About the Author
Check out our latest style of Aquariums located at The Aquarium Lady.


Source: http://www.diyresource.com