Docstoc

Business Plan

Document Sample
Business Plan Powered By Docstoc
					Over 50 Times
More Powerful
Than Regular
 Lubricants!
1
    Over 50 Times More Powerful
      than Regular Lubricants ..
    and Environmentally Friendly!

     - Activated by extreme heat and pressure -
2
                       Environmentally Friendly




        Xtreme Performance
    and Environmentally Friendly!
           • Vegetable-based products
           • Stable
           • Non-corrosive
           • Non-reportable
3
                             Technology


                        Typical
                       Lubricants
    Charge                  -                +
    Bonding/flowing       Flowing          Bonding

    Reaction to heat
                       Migrates away   Migrates towards
    & pressure

    Film strength         Limited       Extraordinary
    Environmentally
                            No               Yes
    friendly
4
                       Bearing Friction Test

      Over 50 times more powerful than regular lubricants!




    4,000 P.S.I.                        200,000 P.S.I.
5
                                Four Ball Wear Test

                          Wear Reduction
         0.45
         0.44
         0.43           0.445
         0.42
         0.41
    mm




          0.4
         0.39
         0.38
         0.37                                                0.387

         0.36
         0.35
                MOTOR OIL WITHOUT XPL+               MOTOR OIL WITH XPL+

                   Test Method: ASTM D-4172 40kg 1 hour @ 75 oC
                              Make & Model: PTI M-4
                Base Product: 5W-30 motor oil without XPL+ technology
                 Test product: 5W-30 motor oil with XPL+ technology
6
                   Four Ball Wear Test

      Co-efficient of Friction


                      MOTOR OIL WITHOUT XPL+




                     MOTOR OIL WITH XPL+




       Test Method: ASTM D-4172 40kg 1 hour @ 75 oC
                  Make & Model: PTI M-4
    Base Product: 5W-30 motor oil without XPL+ technology
     Test product: 5W-30 motor oil with XPL+ technology
7
                              Bottom Line Benefits




    • Dramatically reduces heat & friction
       Reduces wear to extend equipment life
       Displaces moisture, prevents corrosion
       Lowers energy consumption
       Helps prevent costly down time
       Optimizes equipment efficiency
       Fewer oil changes

8
                                                     Diesel-powered
                                                       Equipment

           Application                  ProOne Products                     Anticipated Results
    Any and all diesel and       • Heavy Duty Oil Stabilizer       • Oil change intervals extended by up to 50%
    gasoline engines including                                     • Fuel consumption reduced by 5-10%
    vehicles, generators, etc.   • Engine Life Treatment           • Reduced oil consumption and oil burning
                                                                   • Improved performance through increased
                                 • 15W-40 CJ4 Motor Oil            compression
                                                                   • Longer working life due to wear reduction
                                                                   • Less friction, 2-10% more horsepower
                                                                   • More reliability and fewer breakdowns
    Logging gear                 • Hydraulic Treatment             • Extended life of drag lines and cables
                                                                   • Increased safety due to extended range of
                                 • Multi-purpose EP-2 Grease       cables
                                                                   • Protection from outside elements (rust,
                                                                   corrosion protection)
                                 • XPL-101 Penetrating Lubricant   • Greater reliability, fewer breakdowns, less
                                                                   shop repair




9
                                                             Manufacturing

            Application                    ProOne Products                         Anticipated Results
     Machining - i.e. CNC, lathes,   • BioStable (90%) and Synthetic      • Feeds and speeds increased anywhere from
     grinding, boring, broaching,    (10%) Water Soluble Cutting Fluids   +20% up to +500% depending on application
     drilling, tapping, milling,                                          • Tool life extended by as much as 10 fold
     sawing, stamping, etc.          • ACA Cutting Oil for cutting oil    • Improved surface finishes, eliminating
                                     applications                         additional finishing steps
                                                                          • Sump life extended by as much as 400%
                                     • Industrial Oil Concentrate
                                                                          • Down time reduced due to less wear, longer
                                                                          sump life, longer tool life
                                                                          • Energy reduction of 10-20%
                                                                          • Less oxidation and corrosion on equipment,
                                                                          pumps, tanks, etc.
     Gear boxes                      • Industrial Oil Concentrate         • Energy savings of 10-20%
                                                                          • Reduction in noise
                                     • Multi-purpose EP-2 Grease          • Wear reduced by 50-75%
                                                                          • Reduction in shear factor
     Conveyor systems                • Multi-purpose EP-2 Grease          • Energy savings of 10-20%
                                                                          • Protection from outside elements (rust,
                                     • XPL-101 Penetrating Lubricant      corrosion protection)
                                                                          • Noise reduction
     Hydraulic systems               • See hydraulic systems under        • See hydraulic systems under Diesel Powered
                                     Diesel Powered Equipment             Equipment


10   Pneumatic air-driven            • XPL-101 Penetrating Lubricant      • Less downtime due to water/corrosion
     solenoids and air tools                                              • Equipment working life extended up to 5 X
                                                    Downhole Drilling

            Application                ProOne Products                  Anticipated Results

     Mud Pumps                   • Downhole Drilling Fluid     • Relieve heat, friction & wear on all parts
     Hydraulicing slurry                                       associated with hydraulicing mud/slurry
                                                               • No disposability problems
                                                               •Up to 70% reduction in friction
                                                               • Reduced torque
                                                               • No diesel fuel added to well
                                                               • Extended drill bit life
                                                               • Improved thread protection on pipe sections
     All oil hydraulic systems   • Hydraulic Treatment         • Electrolysis eliminated up to 94%
                                                               • Electromagnetic field/static wear eliminated
                                 • Multi-purpose EP-2 Grease   • Water contamination in hyd. fluid minimized
                                                               • Reduction in wear, heat, friction, oxidation,
                                                               corrosion & acidity
                                                               • Operating life of the fluid extended 2-4 times
                                                               • Seals last longer
                                                               • Less downtime due to wear & tear
                                                               • Energy reduced 8-15% for light load and up
                                                               to 33% for heavy load
                                                               • Less maintenance on all pivot points



11
                                            Testimonials

                   ProOne increases slotting blade
                        tool life by 10 times
                         Organization: Fastenal Manufacturing
                            Contact Person: David Nelson
                             Job Description: Lead Man
                          Application: Slotting Stainless Steel
     ProOne Product used: 15% Industrial Oil Concentrate added to existing cutting oil.

                                         Results:

     Prior to using the ProOne Industrial Oil Concentrate we were getting around 1,000
       pcs per slotting blade before we would have to change it and throw the old one
        away. After adding a 15% mix ratio of ProOne’s Industrial Oil Concentrate we
      ended up running the entire job out without changing the slotting blade at all. We
                   went from 1,000 pcs per blade to 10,000 pcs per blade.
                                       David Nelson



12
                                                Testimonials

     ProOne increases production from 60,000 pcs to
         500,000 pcs per set of threading dies!
                             Organization: Whitesell Corporation
                                Contact Person: John Sughroue
                      Application: Roll Threading Heat Treated Fasteners
                  ProOne Product used: 15% Industrial Oil Concentrate added to
                                        existing cutting oil.
                                               Results:
        We manufacture a part that gets an extreme point rolled on the part in threading. This
        process causes heavy wear on our roll dies. Recently we tried a new oil additive to try
        and improve die life. In the past a set of roll dies that cost us $160.00 would last 60,000
        parts, or .0026 per part. We just finished running 500,000 pcs. on ONE set of dies, or
        .00032 per part. Add to this the cost of down time to change dies and the ordering and
        shipping process to get 7 times the amount of tools here and the total savings is very
        significant to our standard piece price.
        Every time we can improve tool life it leads to less down time, less inventory, less total
        cost to help make us stronger and more competitive.
        Thank you and keep up the good work.

13                                           John Sughroue
                                           Testimonials
                  Favorable Review for ProOne
                   Water Soluble Cutting Fluid
                             Organization: National Header Die
                      Contact Person: Frank Buscemi, CNC Supervisor
                          Application: CNC machines and Grinders
                      ProOne Product used: Water Soluble Cutting Fluid
                                          Results:
     At National Header Die, we have used many different cutting fluids for our various
     applications, we have CNC’s along with grinders to cut tool steel and make chips.
     This is a real comparison that we did regarding ProOne Water Soluble Cutting Fluid.
             + Easy on hands and eyes.
             + Great tool life. (excels @ high temperatures where other lubes fail)
             + Great oil separation / No smoke or mist / Cleaner work environment.
             + Safe for all machines.
             + Great sump life. (clean out and renew very seldom, if at all)
             + Will not foam (grinding operations)
             + Superior Lubricating Properties:
                          - Enhanced tool life
                          - Less load on spindle motors
                          - Improved Surface finishes
14                       Frank Buscemi
                                               Testimonials
           ProOne Works Like magic with Titanium!
                          Organization: Norman Noble Company

         Application: CNC (Titanium) - Gun Drilling, Thread Rolling and Turning
     ProOne Product used: 15% Industrial Oil Concentrate added to existing cutting oil.
                                         Results:
                     Gun Drilling operation - tool life extended from 2 days to 1 week!
                     Roll Threading operation - increased from 50 parts to 100 parts!
                      Turning operation - tool life extended from 2 days to 2 weeks!

                       Also noticed a major reduction in the operating temperature
                              of the oil down to almost room temperature.

                                Application: Mori Seiki CNC (Titanium)
                       ProOne Product used: BioStable Water Soluble Cutting Fluid
                                                 Results:

               Previously mixed the coolant at 10 to 1 with a refractometer reading of 7 1/2.
                  The ProOne products operates much leaner at 5 on the refractometer.

                Tool life has doubled, even more in the 4 inch deep hole drilling operation.
15
                 Lubricants Applications




     • Commercial – fleets, commercial trucking, railway, shipping
16   • Industrial – manufacturing, metalworking, mining, paper mills, drilling
     Core Technology
                   Engine Life
                   Treatment

                  Heavy Duty
                  Oil Stabilizer

                   Industrial
                Oil Concentrate

                   Cutting Oil

                 Water Soluble
                 Cutting Fluids

              Hydraulic Treatment


                  EP-2 Grease


             Penetrating Lubricant


                    Motor Oil


             Downhole Drilling Fluid
17
                                              Engine Life Treatment


                                                  Reduces Friction,
                                                    Heat & Wear

                                                BOTTOM LINE BENEFITS:
                                                • Withstands friction & high temperatures
                                                • Protects engine from wear
                                                • Prevents oxidation & corrosion
                                                • Protects & conditions seals
                                                • Extends oil change intervals
                                                • Helps optimize engine performance
                   DIRECTIONS
      For 4-6 quart capacity engines pour       • Maximizes fuel economy
          12oz into motor oil crankcase.
     For larger capacity engines use at 10%
                                                • Protects from wear at start-up
                 by total volume.
18
                                       Heavy Duty Oil Stabilizer

                                       If it Smokes, Burns, Leaks Oil,
                                           or Needs Extra Protection
                                        BOTTOM LINE BENEFITS:
                                        • Stops oil burning & oil leaks
                                        • Slows blow-by, smoking & oil contamination
                                        • Protects against wear to extend engine life
             DIRECTIONS
                       % by volume
                                        • More power with better fuel economy
     Regular gas engines         20%    • Provides dry start protection
     Badly worn engines
     Diesel engines
                                 40%
                                 20%
                                        • Easier starting at all temperatures
     Commercial/Industrial       20%    • Increases oil pressure
     Marine engines              20%
     Motorcycle/Marine engines   20%    • Conditions seals to extend life
     4-stroke motorcycles
             with Wet Clutches
                                 10%
                                        • Stops thermal breakdown
     Manual Transmissions        20%    • Quiets engines & gear boxes
     Differential & Gear Boxes   20%
19
                                        • Extends oil life by 50% or more
                                  Industrial Oil Concentrate


                                      Superior Performance
                                    for Industrial Applications

                                       BOTTOM LINE BENEFITS:
                                       • Extends life of gears, cams & dies
                                       • Improves speed & feed rates
          APPLICATIONS                 • Improves surface finishes
     Use at 10% by total volume
                                       • Reduces down time
           Cold-heading
             Stamping                  • Cuts down wear & tear
        Slitting machines              • Less power consumption
             Threading
     Compressors, Generators           • Reduces smoke & noise
       Pumps, Gear boxes
     Heavy chains & Sprockets          • Extends machine life
20     Ball & roller bearings
                                                     ACA Cutting Oil
                                                  Air Craft Approved (ACA) for Titanium



                                                           Cuts tool wear.
                                                           Cuts downtime.
                                                            Cuts costs...
                                                       BOTTOM LINE BENEFITS:
      APPLICATIONS:
                                                       • Improves speed & feed rates
     Screw machines
      CNC machining
                            For all ferrous and
                            non-ferrous alloys
                                                       • Reduces down time
            Lathes
       Roll threading
                                                       • Cuts down wear from metal removal
                            Ideal for:
          Stamping                                     • Improves surface finishes
           Grinding
       Gear hobbing
                                • Alloy steel
                             • Stainless steel
                                                       • Lowers power consumption
            Sawing
     Slitting machines
                                  • Titanium           • Reduces smoke & noise
                                • Waspalloy
          Threading                • Inconel           • Extends machine & tool life
           Turning
            VMC’s
                                 • Mild steel
                                • Aluminum
                                                       • Resistant to foaming
        Metalforming          • Copper alloys          • Corrosion resistant
21   Use at full-strength
                                      Bio-Stable
                              Water Soluble Cutting Fluid
                                         Earth-friendly Formula ..
                                         ROI Friendly Performance
                                          BOTTOM LINE BENEFITS:
                                          • Increases production rates
                                          • Improves tolerances & finish
                                          • Extends tool and machine life
                                          • Reduces edge buildup, welding & tearing
                                          • Extends sump life
                                          • Biocides to control rancidity
      APPLICATIONS/DILUTION RATIOS        • Retards bacteria and fungus
     Reaming & Boring     10:1 to 15:1    • Reduces down time
     Drilling & Tapping   10:1 to 15:1
     Milling              10:1 to 15:1    • Lowers power consumption & noise
     Turning
     Sawing
                          15:1 to 30:1
                          15:1 to 30:1
                                          • Resistant to foaming
     Stamping             15:1 to 30:1    • Soft & hard water emulsification
     Grinding
     Quenching
                          30:1 to 50:1
                          30:1 to 50:1
                                          • Operator friendly – safe, no odors
22
                                          • No extreme hazard disposability issues
                                      Synthetic
                              Water Soluble Cutting Fluid
                                         The Ultimate Performance to
                                          Improve your Bottom Line
                                            BOTTOM LINE BENEFITS:
                                            • Increases speed & feed rates
                                            • Improves surface finish
                                            • Extends tool life
                                            • Reduces edge buildup, welding & tearing
                                            • Extends life of cutting solution
                                            • Retards bacteria growth
      APPLICATIONS/DILUTION RATIOS          • Reduces down time
     Reaming & Boring
     Drilling & Tapping
                          10:1 to 15:1
                          10:1 to 15:1
                                            • Lowers power consumption
     Milling              10:1 to 15:1      • Cuts down noise
     Turning
     Sawing
                          15:1 to 30:1
                          15:1 to 30:1
                                            • Resistant to foaming
     Stamping             15:1 to 30:1      • Soft & hard water emulsification
     Grinding             30:1 to 50:1
     Quenching            30:1 to 50:1      • No hazardous ingredients
23
                                            • No harmful vapors
                                               Hydraulic Treatment

                                              Unsurpassed Lubrication ..
                                             And Environmentally Friendly!
                                               BOTTOM LINE BENEFITS:
                 APPLICATIONS:
                Hydraulic systems              • Lowers friction & operating temperatures
          Power transmission equipment         • Protects against wear
           Injection molding machines
                Railroad equipment             • Reduces electrolysis
          Refineries & oil field equipment
               Paper and pulp mills            • Displaces moisture
           Mining & smelter equipment          • Prevents oxidation & corrosion
            Automatic Transmissions
               Power steering units            • Helps extend equipment life
                  Pumps & Rams
                                               • Compatible with petroleum & synthetics
                DILUTION RATIOS:
                                               • Helps to protect & condition seals
     Hydraulic Systems:        10% by volume
     Wet bath clutches, brakes: 5% by volume   • Optimum run times .. less down time
     Automatic transmissions: 2% by volume
24
                     Multipurpose EP-2 Grease

                          Extreme Performance
                                  o        o
                          from –40 F to 615 F !
                            SUPERIOR PERFORMANCE:
                             Load carrying ability

                             Shear stability

                             Water resistance

                             Oxidation & corrosion resistance

                             Cling capability

                             Seal compatibility
     APPLICATIONS:
       Industrial
     Manufacturing          REDUCES:
      Commercial
                             Heat, friction, noise & wear
         Marine
      Automotive             Corrosion
         Mining
                             Downtime
     Construction
      Agricultural           Power consumption
25
                  XPL-101
            Penetrating Lubricant
     If it rolls, rubs, slides, rusts, corrodes,
             seizes or collects moisture
                   …Use XPL-101…
       The Best Liquid Tool in the Box
               BOTTOM LINE BENEFITS:
               • Xtreme pressure film strength
               • Lubricates, stops squeaks & noise
               • Frees sticky/rusted parts
               • Protects metal from rusting
               • Retards electrical corrosion
               • Displaces moisture
               • Non-toxic, environmentally friendly
26
     Downhole Drilling Fluid

         ProOne Knows the Drill
           BOTTOM LINE BENEFITS:
              Over 70% reduction in friction
              Less downtime - more production
              Extends drill bit life
              Reduces torque
              Lowers operating temperatures
              Eliminates up to 94% of electrolysis
              Displaces moisture
                     AND
              Biodegradable!
              No diesel fuel added to well
27            No disposability issues
      FUEL
    PRODUCTS
• Fuel Maximizer
• MFC Marine Fuel Conditioner
                         Fuel Maximizer




        Emissions                  Lubricity
     Maintenance costs               BTU’s
     Fuel consumption             Performance
         Oxidation                 Cleaning
       Ash formation




29
                                      How it Works



     • Breaks down large fuel particles
                                                More efficient
                                                combustion
     • Lowers the temperature at which
                                                which produces
     soot burns
                                                more energy
                                                and less
     • Accelerates the combustion rate of
                                                emissions per
     hard-to-burn hydrocarbon molecules
                                                unit of fuel
                                                burned.
     • Dramatically reduces ash and
     unburned carbon




30
                                 Testing



     • EPA, OTAQ, and ETV tested.

     • Tested at South West Research Institute for fuel economy,
     emissions and OEM acceptability.

     • Proven to work with BioDiesel applications.

     • Proven reduction in NOx particulates and NOx gases.

     • Effective in Diesel and Heavy Fuel Oil (HFO) applications.




31
              Cleans Carbon Deposits




     BEFORE                  AFTER

32
                                    ASTM D6079
                                    Lubricity Test




        Fail MWSD                                      Pass MWSD
     Mean Wear Scar Diameter                         Mean Wear Scar Diameter

            0.57mm                                          0.35mm


                        Conclusion: Improves lubricity in fuel.
33
                                        Stability Test




     Fail <80% Reflectance                         Pass >80% Reflectance


      Conclusion: Provides excellent stability. Meets requirements for the National
      Council of Weights and Measures (NCWM) Premium Diesel Fuel Specification.

34
                              Dosing Ratio


                   Dosing ratio: 1:3,000

                • 1oz treats 23 gallons of fuel
     oz./gal.   • I gallon treats 3,000 gallons of fuel
                • 55 gallons (drum) treats 165,000 gallons of fuel




                • 29.6 mL treats 87 Liters of fuel
                • 3.79 Liters treats 13,638 Liters of fuel
     ml/Liter
                • 208 Liter (Drum) treats 750,106 Liters of fuel


35
   MFC Marine Fuel
     Conditioner

Designed to meet new MARPOL/IMO
and ULSD mandates. Helps the fuel burn
cleaner to increase cetane number,
reduce emissions and improve fuel
performance.
                                      MFC Marine Fuel
                                        Conditioner

 Meets new MARPOL/IMO and ULSD standards
 Reduces exhaust emissions
 Improves fuel economy
 Typically increases cetane number by 2
 L10 superior detergency
 Water dispersant to help safely remove water
 Controls algae
 Antioxidants protect thermal and oxidative stability
 Improves lubricity
 Corrosion inhibitor
 Superior low temperature additive handling properties

40CFR80.591 Compliance statement. The sulfur content of this diesel fuel does not exceed 15 ppm.
                      82
                      84
                      86
                      88
                      90
                      92
                      94
                      96
                      98
                     100
1 to 10000

 1 to 9000

 1 to 8000

 1 to 7000

 1 to 6000

 1 to 5000

 1 to 4000

 1 to 3000

 1 t0 2000

 1 to 1000

  1 to 500

 1 to 400

  1 to 300

  1 to 200
                           % of B urn in C ylinder




  1 to 100
                                                     Cylinder Testing




    R atio of MF C
    Ba




                       134000
                                135000
                                         136000
                                                  137000
                                                           138000
                                                                    139000
                                                                             140000
          se
1
     to lin e
        10
    1      0
       to 00
         90
    1
       to 00
         80
    1
       to 00
         70
    1        0
       to 0
         60
    1
       to 00
         50
    1
       to 00
         40
    1
       to 00
         30
    1
       t0 00
         20
    1        0
       to 0
         10
      1      0
        to 0
          50
      1
        to 0
          40
      1
                                                                                      B T U's per P ound




        to 0
          30
      1
        to 0
          20
               0
                                                                                                           BTU Testing




      R atio of MF C
 Waterless
Wash & Shine
     Waterless Wash & Shine

     Cleans, Shines & Protects ...
           .. Without Water ..
        .. Without Scratching ..
        BOTTOM LINE BENEFITS:
        • Only 15 minutes for an average car
        • No buckets, hose or sponge required
        • No mess to clean up
        • Citrus-based formula cleans bugs, tar,
          tree sap, bird droppings, water spots
        • Just-waxed shiny coating beads water
          for 4 weeks
        • For paint, chrome or glass
41
     Waterless Wash & Shine



                 WON’T SCRATCH THE FINISH




       1. Surrounds      2. Wipes off dirt   3. Leaves clean,
        and lifts dirt       without          shiny, smooth,
         particles.         scratching       protected finish.




42
• Q&A
• Next Steps